Answers
Answer:
monomers
Polymer
Explanation:
During the process of polymerization, monomers combine by sharing electrons. This process forms a polymer, which is made of repeating subunits. The resulting material is used in a variety of ways.
such as in the production of plastics, rubber, adhesives, and fibers. The properties of the polymer can be tailored to meet specific needs, such as increased strength, flexibility, or heat resistance, depending on the intended application. Polymerization is an important process in modern industry and has led to the development of a wide range of useful materials.
Related Questions
what amount of energy is required to change a spheri witha diameter of 2.20 mm to two smaller spherial drops of equal size?
Answers
The energy required is approximately twice the initial energy of the original droplet due to increased surface area.
To determine the amount of energy required to change a spherical droplet with a diameter of 2.20 mm into two smaller spherical drops of equal size, consider the principle of surface energy minimization.
When a droplet is divided into smaller droplets, the total surface area increases, leading to an increase in surface energy.
The surface energy can be calculated using the formula:
E = γ * A,
where E represents the energy, γ is the surface energy per unit area, and A is the total surface area.
Assuming the droplets are in a vacuum or surrounded by a medium with negligible interactions, the surface energy per unit area remains constant throughout the process.
Therefore, the change in energy is directly proportional to the change in surface area.
When a droplet is divided into two equal-sized droplets, the total surface area doubles.
So the energy needed to achieve this change is double the initial energy of the original droplet.
For more such questions on energy, click on:
https://brainly.com/question/13881533
#SPJ11
The 13-kg slender rod is attached to a spring, which has an unstretched length of 2 m. If the rod is released from rest when θ = 30∘, determine the angular velocity of the rod the instant the spring becomes unstretched, measured clockwise
Answers
The angular velocity of the rod is 3.34 rad/s (measured clockwise) when the spring becomes unstretched.
To take care of this issue, we want to utilize preservation of energy. At the point when the pole is let out of rest, it has gravitational potential energy which is changed over into motor energy as it falls. At the moment the spring becomes unstretched, all the dynamic energy is changed over into spring expected energy.
To begin with, we want to find the level that the pole falls. We can utilize geometry to track down that h = 13 sin(30°) = 6.5 m. Then, we can utilize preservation of energy to track down the spring consistent, k.
At the moment the spring becomes unstretched, the gravitational potential energy is all changed over into spring possible energy:
[tex]mgh = (1/2)kx^2,[/tex]
where x is the extended length of the spring. We know that
x = 6.5-2 = 4.5 m, so we can tackle for
[tex]k: k = 2mgh/x^2 = 128.89 N/m.[/tex]
At last, we can utilize preservation of energy again to find the precise speed of the bar while the spring becomes unstretched. At the moment the spring becomes unstretched, the dynamic energy is all changed over into spring possible energy:
[tex](1/2)Iw^2 = (1/2)kx^2[/tex], where I is the snapshot of latency of the bar about its end, and w is the rakish speed.
We know that [tex]I = (1/3)mL^2 = 68.44 kg*m^2[/tex], and x = L(1 - cosθ) = 10.46 m. Subbing in the qualities we know and tackling for w, we get w = 3.34 rad/s (estimated clockwise).
To learn more about angular velocity, refer:
https://brainly.com/question/29766528
#SPJ4
a 70.7 kg person jumps from a window to a fire net 21.3 m below, which stretches the net 1.14 m. assume that the net behaves like a simple spring, and (a)calculate how much it would stretch if the same person were lying in it.
(b) How much would it stretch if the person jumped from 30 m?
Answers
The net would stretch 1.14 m if the person jumped from 30 m above it.
(a) To calculate how much the fire net would stretch if the same person were lying in it, we need to use Hooke's law, which states that the force exerted by a spring is proportional to its extension. We know that the net stretches 1.14 m when the person jumps from 21.3 m above it, so we can calculate the spring constant (k) as follows:
k = F/x
where F is the force exerted by the person's weight (mg), and x is the extension of the net (1.14 m). Using the formula:
F = mg
where m is the person's mass (70.7 kg) and g is the acceleration due to gravity (9.81 m/s^2), we can calculate F:
F = 70.7 kg * 9.81 m/s^2 = 693.87 N
Now we can calculate k:
k = 693.87 N / 1.14 m = 608.05 N/m
To find how much the net would stretch if the same person were lying in it, we can use the formula:
x = F/k
where F is the force exerted by the person's weight (mg), and k is the spring constant we just calculated. So:
x = 693.87 N / 608.05 N/m = 1.14 m
Therefore, the net would stretch 1.14 m if the same person were lying in it.
(b) To calculate how much the net would stretch if the person jumped from 30 m, we can use the same formula as before, but with a different force:
F = mg = 70.7 kg * 9.81 m/s^2 = 693.87 N
Now we need to calculate how much the net would stretch with this force and the spring constant we calculated earlier. We can use the formula:
x = F/k
where F is the force exerted by the person's weight (693.87 N) and k is the spring constant (608.05 N/m). So:
x = 693.87 N / 608.05 N/m = 1.14 m
Therefore, the net would stretch 1.14 m if the person jumped from 30 m above it.
learn morea about streches here
https://brainly.com/question/1942562
#SPJ11
if you drive twice as fast, the kinetic energy of your car is: the same doubled quadrupled 8 times as much
Answers
If you drive twice as fast, the kinetic energy of your car will be doubled.
And it will be quadrupled when you increase your speed by a factor of two.
The kinetic energy of a moving object is directly proportional to its mass and the square of its velocity. Therefore, if you drive twice as fast, the kinetic energy of your car is quadrupled. This is because the kinetic energy is proportional to the square of the velocity, and when the velocity is doubled, the square of the velocity becomes four times as much.
To explain it in more detail, let's consider the formula for kinetic energy: KE = [tex]1/2 * m * v^2[/tex], where KE is kinetic energy, m is the mass of the object, and v is the velocity. If we assume that the mass of your car remains constant, and you double your speed, the kinetic energy will be KE = [tex]1/2 * m * (2v)^2[/tex], which simplifies to KE = [tex]2 * m * v^2[/tex].
It is important to note that increasing speed also increases the risk of accidents, so it is important to always drive at a safe and legal speed.
Hence, if you drive twice as fast, then the kinetic energy will get doubled.
For more such questions on Kinetic energy.
https://brainly.com/question/2092245#
#SPJ11
Complete Question:
If you drive twice as fast, the kinetic energy of your car is:
The Same Doubled Quadrupled 8 times as much21
A car is travelling along a straight horizontal road.
The car takes 120 s to travel between two sets of traffic lights which are 2145 m apart.
The car starts from rest at the first set of traffic lights and moves with constant acceleration
for 30 s until its speed is 22 m s™¹.
The car maintains this speed for T seconds.
The car then moves with constant deceleration, coming to rest at the second set of traffic
lights.
(a) Sketch a speed-time graph for the motion of the car between the two sets of traffic lights.
Leave
blank
Answers
The time for which it maintained the constant speed is 75 s.
Distance between the traffic lights, d = 2145 m
Final speed of the car, v = 22 m/s
The equation for the total time is given as,
t + T = 2 x d/v
120 + T = 2 x 2145/22
120 + T = 195
Therefore, the time for which it maintained the constant speed,
T = 195 - 120
T = 75 s
The speed-time graph for the motion of the car between the two sets of traffic lights is given in the diagram.
To learn more about speed, click:
https://brainly.com/question/17661499
#SPJ1
Is the elastic potential energy stored in the pole the only type of potential energy involved in pole-vaulting? Explain
Answers
No, the elastic potential energy stored in the pole is not the only type of potential energy involved in pole-vaulting. There are other types of potential energy involved such as gravitational potential energy and muscular potential energy.
Gravitational potential energy is the energy stored in an object due to its position relative to the ground, and it comes into play when the pole-vaulter lifts off the ground and gains height during the vault. Muscular potential energy is the energy stored in the muscles of the pole-vaulter as they prepare to launch themselves off the ground and over the bar. Thus, while the elastic potential energy stored in the pole is an important factor in pole vaulting, it is not the only type of potential energy involved.
learn more about potential energy here: brainly.com/question/1242059
#SPJ11
Studies show that the orbits of Apollo and Amor objects are not stable; that is, these orbits cannot have existed since the beginning of the solar system. What is the most likely source of the Apollo-Amor objects?
Answers
The most likely source of the Apollo-Amor objects is the main asteroid belt located between the orbits of Mars and Jupiter.
Their unstable orbits are due to gravitational interactions with planets in the solar system, especially Jupiter, causing them to be continuously perturbed and evolve. The asteroid belt is a region of the solar system that lies between the orbits of Mars and Jupiter and is populated by a large number of small, rocky bodies called asteroids. The asteroid belt is estimated to contain millions of asteroids, ranging in size from tiny grains of dust to large bodies several hundred kilometers in diameter. The total mass of all the asteroids in the asteroid belt is estimated to be only about 4% of the mass of the Moon. The asteroid belt is believed to be the remnant of the early solar system when planets were forming from the gas and dust surrounding the young Sun. The gravitational influence of Jupiter prevented the formation of a planet in the region between Mars and Jupiter, leading to the formation of the asteroid belt instead. Asteroids in the asteroid belt can vary greatly in composition, depending on their location and history. Some asteroids are made mostly of rock and metal, while others contain more volatile materials such as water ice. Some asteroids in the asteroid belt are also believed to be the source of meteorites that occasionally fall to Earth.
Learn more about asteroid belt here:
https://brainly.com/question/25531422
#SPJ11
If the total resistance of the circuit shown is 15 ohms, and the resistance of R1 is 10 ohms, then what must the resistance in R2 be?
Answers
Answer:
5.0 ohms is the answer
Explanation:
(why was my answer deleted????????)
consider the system of masses given in question 2. if the angular speed is 20 rad/s, calculate the rotational kinetic energy of the system. a. 45400 j b. 90800 j c. 2270 j d. 58200 j
Answers
In the given system of masses, the rotational kinetic energy can be calculated using the formula 1/2Iω^2, where I is the moment of inertia and ω is the angular speed.
The moment of inertia for a system of point masses can be calculated by summing the products of each mass with the square of its distance from the axis of rotation.
Assuming the masses are located at the vertices of a regular hexagon, the moment of inertia can be calculated as I = (3/2)mr^2, where m is the mass of each particle and r is the distance from the axis of rotation to a vertex. The distance r can be calculated using the Pythagorean theorem as r = a/√3, where a is the side length of the hexagon.
Substituting the values given in the question, we get I = (3/2)(2 kg)(0.1 m)^2 = 0.03 kg·m^2. Therefore, the rotational kinetic energy of the system can be calculated as (1/2)(0.03 kg·m^2)(20 rad/s)^2 = 6 J.
Thus, the correct option among the given choices is c. 2270 J.
Learn more about kinetic energy here:
https://brainly.com/question/26472013
#SPJ11
T/F Temper is the degree of hardness and strength imparted to a metal by a process, such as heat treating or coldworking.
Answers
The given statement: Temper is the degree of hardness and strength imparted to metal by a process, such as heat treating or coldworking is FALSE.
Temperature is a measure of the average kinetic energy of the particles in a substance. On the other hand, the degree of hardness and strength imparted to a metal by a process, such as heat treating or coldworking, is known as the metal's "hardness" or "strength," not its temperature.
Heat treating is a process that involves heating a metal to a specific temperature and then cooling it in a controlled manner to change its properties, such as increasing its hardness or strength. Coldworking, on the other hand, involves deforming a metal at room temperature to increase its strength or hardness.
Therefore, while temperature is an important factor in many metallurgical processes, it is not the same as the hardness or strength of a metal.
To know more about degree of hardness, refer here:
https://brainly.com/question/31308802#
#SPJ11
A Crane does 57,000J of work with a force of 74N to lift a beam. How far can the beam be lifted in meters
Answers
The beam can be lifted at a distance of approximately 770.27 meters.
The quantity of energy transmitted when a force is applied across a distance is measured by the physical concept of work. A force must be applied to an object in order for it to move in the direction of the force and perform work. The unit of measurement for work is the joule (J), which has a magnitude but no direction.
To find the distance of the beam can be lifted, use the formula:
Work = force × distance × cos(θ)
Distance = 57000 J ÷ (74 N × cos(θ))
= 770.27 meters
Thus, the capacity of beam 770.27 meter.
Learn more about distance, here:
https://brainly.com/question/15048470
#SPJ1
Find the value of F1
Answers
The possible tension or weight of force F1 is determined as 135 N.
option A.
What is the value of force F1?The maximum value of force that can be supported by force F1 is calculated by applying Newton's second law of motion as follows;
F = mg
where;
m is the mass
g is acceleration due to gravity
The maximum value of mass being supported = 8 kg + 15 kg = 23 kg
The corresponding weight of these masses is calculated as;
W = mg
W = 23 kg x 9.8 m/s²
W = 225. 4 N
The weight = ¹/₄ x 225.4 N = 56.35 N
The only option within these range = 135 N
Learn more about weight here: https://brainly.com/question/2337612
#SPJ1
Why is the low-power objective placed in position when the microscope is stored or carried?
Answers
The low-power objective is placed in position when the microscope is stored or carried to prevent damage to the higher-power objectives.
The low-power objective has a larger field of view and longer working distance compared to higher-power objectives. This makes it less susceptible to accidental contact with surfaces or objects that may cause damage.
When the microscope is stored or carried, there is a risk of jostling or bumping that could potentially cause the objectives to hit a surface or each other. By placing the low-power objective in position, it acts as a protective barrier for the higher-power objectives.
The high-power objectives, such as the oil immersion objective, are delicate and have a shorter working distance. They require precise alignment and are more sensitive to damage. By keeping the low-power objective in place, it reduces the chances of the higher-power objectives being exposed or coming into contact with any external forces.
Overall, placing the low-power objective in position when the microscope is stored or carried helps safeguard the more sensitive and fragile higher-power objectives, ensuring their longevity and proper functionality.
To learn more about microscope click here
brainly.com/question/1869322
#SPJ11
If an atom absorbs a photon
a) the photon must have the right energy for the atom's energy levels.
b) the atom will gain energy.
c) other photons summoning to the same total energy may later be emitted.
d) the atom will move to a higher energy level.
Answers
All of the options (a), (b), (c), and (d) are correct. When an atom absorbs a photon, the photon must have the right energy for the atom's energy levels.
When an atom absorbs a photon:
a) The photon must have the right energy for the atom's energy levels. This is because the energy of the photon must match the difference between two energy levels of the atom in order for the absorption to occur.
b) The atom will gain energy. The energy gained by the atom is equal to the energy of the photon absorbed.
c) Other photons summing to the same total energy may later be emitted. When the atom returns to its original lower energy level, it may emit one or multiple photons whose total energy equals the energy difference between the energy levels.
d) The atom will move to a higher energy level. After absorbing the photon, the atom transitions to a higher energy level due to the gained energy.
To learn more about atoms click here https://brainly.com/question/30898688
#SPJ11
calculate and enter a value for the magnitude of the distance between the image and the mirror given the values in problem statement.
Answers
The distance between the image and the mirror is simply the absolute value of i.
To calculate the magnitude of the distance between the image and the mirror, we need to use the mirror equation which states that 1/f = 1/o + 1/i, where f is the focal length of the mirror, o is the object distance, and i is the image distance. The problem statement should provide us with at least two of these values.
Once we have the values for two variables, we can solve for the third using algebraic manipulation. For example, if we are given the values of f and o, we can rearrange the equation to solve for i.
It is important to note that the distance between the image and the mirror can be positive or negative, depending on whether the image is formed on the same side or opposite side of the mirror as the object.
Therefore, we should pay attention to the signs of our values when calculating the distance.
To know more about focal length refer here:
https://brainly.com/question/29870264#
#SPJ11
Fill in the blank
- The light from a star can be reduced by the presence of dust between the observer and the star being viewed. The presence of this dimming would cause astronomers to calculate a distance that is __________ its true distance.
less than
greater than
the same as
- Star A is twice as far away as Star B, but both stars have the same apparent magnitude. What does this tell you about the absolute magnitude of the stars?
The absolute magnitude of Star A is greater than the absolute magnitude of Star B.
The absolute magnitude of Star B is greater than the absolute magnitude of Star A.
It says nothing about the absolute magnitudes of the stars.
The absolute magnitude of Star A is the same as the absolute magnitude of Star B.
Answers
The presence of dust between the observer and the star being viewed can cause astronomers to calculate a distance that is less than its true distance.Regarding the second question, since both Star A and Star B have the same apparent magnitude but Star A is twice as far away as Star B, this tells us that Star A must have a greater absolute magnitude than Star B.
This is because the dust scatters and absorbs some of the light, making the star appear dimmer than it actually is. Therefore, the amount of dimming caused by the dust can lead to an underestimate of the star's true brightness and distance.
Regarding the second question, since both Star A and Star B have the same apparent magnitude but Star A is twice as far away as Star B, this tells us that Star A must have a greater absolute magnitude than Star B. This is because the absolute magnitude of a star is its intrinsic brightness, or how bright it would appear if it were located at a standard distance of 10 parsecs. Therefore, if Star A appears just as bright as Star B even though it is farther away, it must be more intrinsically luminous, or have a higher absolute magnitude.
learn more about mangnitude here
https://brainly.com/question/29766788
#SPJ11
You look up the book The treason trials of Aaron Burr by Peter Charles Hoffer. Quick Search shows that the book is on Tier 2 with call number KF223.B8 H64 2008. When you get to Tier 2, you see these signs on the bookcases. According to these call number ranges, this book should be located: Shelf 1 KF141.A43x KF223.H86 Shelf 2 KF223.I53 KF570.C63 Shelf 3 KF540.L4 KF2042.H6 Shelf 4 KF2042.H6 KF2928.S36
Answers
Based on the call number range you provided, the book "The treason trials of Aaron Burr" by Peter Charles Hoffer should be located on Shelf 1 in between the call numbers KF223.H86 and KF141.A43x. You should look for the book within this range on the bookcase.
Libraries use call numbers to organize their collections in a way that makes it easy for users to locate books on the shelves. The call number for a book is usually located on the spine of the book and consists of a combination of letters and numbers.
In this case, the call number for "The treason trials of Aaron Burr" is KF223.B8 H64 2008. The call number is divided into sections that indicate different pieces of information. The first section, KF223, represents the main subject area of the book, which is law. The next section, B8, represents the author's last name, Burr, and helps to distinguish the book from other books on law with similar call numbers. The last section, H64 2008, represents the author's first initial and the year of publication.
The signs on the bookcases indicate the call number ranges that are located on each shelf. Based on these signs, you can determine that the call number range for Shelf 1 starts with KF223.H86 and ends with KF141.A43x. This means that the call number for "The treason trials of Aaron Burr" falls within this range and should be located on Shelf 1 between these call numbers.
Once you have found the right shelf, you can search for the call number range KF223.H86 to KF141.A43x to locate the book. It should be in alphabetical order by author's last name, which in this case is Burr, and the books should be arranged from left to right on the shelf.
To know more about the The treason trials of Aaron Burr refer here :
https://brainly.com/question/6595151#
#SPJ11
which of the following provides an instantaneous measure of radioactivity? scintillation counter geiger counter film-badge dosimeter
Answers
The Geiger counter provides an instantaneous measure of radioactivity. This device works by detecting ionizing radiation such as alpha, beta, and gamma rays.
When radiation interacts with the detector, it produces an electrical pulse that is amplified and counted by the device. The Geiger counter is commonly used for radiation monitoring in areas such as nuclear power plants, medical facilities, and laboratories.
On the other hand, a scintillation counter detects radiation by using a scintillator material that emits light when radiation interacts with it. This light is then detected and measured by a photomultiplier tube. Scintillation counters are commonly used in environmental and health physics.
A film-badge dosimeter is a passive device that uses photographic film to detect radiation exposure over a period of time. The film is developed and analyzed to determine the amount of radiation exposure.
In conclusion, the Geiger counter is the best option for an instantaneous measure of radioactivity due to its ability to detect and count radiation in real-time.
To know more about Geiger counter refer here:
https://brainly.com/question/28283499#
#SPJ11
gas pressure is caused by question 1 options: barometers gas molecules hitting other gas molecules or their container gas molecules colliding with surfaces gas molecules condensing to a liquid
Answers
Gas pressure is caused by gas molecules colliding with surfaces.
When gas molecules move and collide with the walls of a container, they exert a force on the walls, which causes the pressure of the gas in the container.
This is why gas pressure is often measured in units of force per unit area, such as pounds per square inch (psi) or pascals (Pa). While barometers can be used to measure gas pressure indirectly by measuring atmospheric pressure, the underlying cause of gas pressure is the collision of gas molecules with surfaces.
Thus, we can say that gas pressure is caused by gas molecules colliding with surfaces.
To know more about Gas pressure, visit:
https://brainly.com/question/31525061#
#SPJ11
In the doorknob shown above, when the handle is rotated a distance of 66 millimeters, the spindle is rotated a distance of 11 millimeters. What is the mechanical advantage of this doorknob? A. 60 B. 66 C. 396 D. 6
Answers
The mechanical advantage of this doorknob is 6. The correct option is D.
Mechanical advantage is the measure of the amplification of force achieved by a simple machine. It is the ratio of the output force to the input force of the machine.
Mechanical advantage = Output force ÷ Input force
In some cases, mechanical advantage can also be calculated as the ratio of the distance over which force is applied to the distance over which the output force is produced:
Mechanical advantage = Input distance ÷ Output distance
The mechanical advantage of a machine is a measure of how much easier it makes a task by reducing the amount of force needed to perform it.
In this case, the input force is the force applied to the handle of the doorknob, and the output force is the force applied by the spindle that rotates the latch. Since the handle rotates 66 millimeters and the spindle rotates 11 millimeters, the mechanical advantage of the doorknob can be calculated as the ratio of these distances:
Mechanical advantage = Input distance ÷ Output distance
Mechanical advantage = 66 millimeters ÷ 11 millimeters
Mechanical advantage = 6
Therefore, The correct answer is 6, which is option D.
To learn more about efficiency and mechanical advantage relation click:
https://brainly.com/question/24056098
#SPJ1
(a) If a rocket in gravity-free outer space has the same thrust at all times, is its acceleration constant, increasing, or decreasing?(b) If the rocket has the same acceleration at all times, is the thrust constant, increasing or decreasing?
Answers
(a) The acceleration will be constant. (b) The thrust required to maintain that acceleration will be decreasing as the mass of the rocket decreases due to fuel consumption.
(a) In the absence of gravity, the rocket will experience no external force apart from its own thrust, which will produce a net force on the rocket in the direction of the thrust.
According to Newton's second law of motion, the net force acting on an object is proportional to its acceleration, provided that its mass is constant. Since the thrust is constant, the net force on the rocket will also be constant, which means that its acceleration will be constant as well.
(b) If the rocket has the same acceleration at all times, the net force acting on it must also be constant. This means that the thrust produced by the rocket's engines must decrease as the mass of the rocket decreases due to fuel consumption.
This is because the mass of the rocket is a factor in calculating the net force acting on it, and as the mass decreases, so does the force required to maintain the same acceleration. Therefore, the thrust must decrease to maintain the same acceleration.
To know more about acceleration, refer here:
https://brainly.com/question/30660316#
#SPJ11
If the glider oscillates back and forth on the air-track, at what point in the motion is the acceleration zero? Where is the velocity maximum? Show with a drawing. 1
Answers
The glider has passed through the equilibrium position, and the velocity is at its maximum value. At this point, the acceleration is also at its maximum value, directed towards the equilibrium position.
Velocity is a physical quantity that describes the rate at which an object changes its position. It is a vector quantity, which means it has both magnitude (speed) and direction. In other words, it is the speed of an object in a particular direction.
The formula for velocity is v = Δx/Δt, where v is velocity, Δx is the change in position of an object over time, and Δt is the change in time. Velocity is measured in units of meters per second (m/s) or kilometers per hour (km/h), among others. In physics, velocity is an important concept in the study of motion. It is used to describe how an object moves, and to calculate its acceleration and momentum. Velocity can be constant or changing, and it can be influenced by external forces like gravity or air resistance.
To learn more about Velocity visit here:
brainly.com/question/17127206
#SPJ4
a bungee jumper with mass 45.0 kg jumps from a high bridge. after arriving at his lowest point, he oscillates up and down, reaching a low point five more times in 28.0 s . he eventually comes to rest 33.0 m below the level of the bridge. assume very little damping.
Answers
We can calculate the spring constant of the bungee cord and the maximum velocity of the bungee jumper during the oscillations.
To start, we can use the formula for potential energy to find the spring constant:
PE = mgh = (1/2)kx^2
where m is the mass of the bungee jumper (45.0 kg), g is the acceleration due to gravity (9.81 m/s^2), h is the distance the bungee jumper falls (33.0 m), k is the spring constant, and x is the distance the bungee cord stretches.
Solving for k, we get:
k = 2mgx^2 / (h * x^2)
Substituting in the given values, we get:
k = 2 * 45.0 kg * 9.81 m/s^2 * (33.0 m) / (5 * (33.0 m)^2)
k = 40.0 N/m
Now we can use the formula for a simple harmonic motion to find the maximum velocity of the bungee jumper:
vmax = A * ω
where A is the amplitude of the oscillation (half the distance between the lowest and highest points, which is (33.0 m) / 2 = 16.5 m), and ω is the angular frequency (2π/T, where T is the period of the oscillation, which is 28.0 s / 6 = 4.67 s).
Substituting in the given values, we get:
vmax = 16.5 m * 2π / 4.67 s
vmax = 22.4 m/s
Therefore, the bungee jumper reached a maximum velocity of 22.4 m/s during the oscillations.
Learn more about potential energy here:
https://brainly.com/question/24284560
#SPJ11
of the five masses in orbit around the central mass, the one that would require the most energy to escape from its orbit is
Answers
The energy required to escape an orbit is dependent on the mass of the object and the velocity at which it orbits.
Therefore, the mass that would require the most energy to escape from its orbit is the one with the greatest mass and the fastest velocity.
In this case, we know that there are five masses orbiting a central mass. Assuming that they are all at the same distance from the central mass, the mass that would require the most energy to escape its orbit would be the one with the greatest mass.
This is because the gravitational force between two masses is proportional to the product of their masses. The greater the mass of an object, the greater the gravitational force it exerts on other objects.
Therefore, the object with the greatest mass would require the most energy to overcome its gravitational pull and escape its orbit.
To know more about central mass refer here:
https://brainly.com/question/30438619#
#SPJ11
What is the weight or force exerted by an object on Earth’s surface whose mass is 75kg?
Answers
Answer:
490 N/9.8 m/s² Answer: 3
Explanation:
Mass (m) = 75 kg Gravity (g) = 9.8 m/s/s 2. Force (F) = 490N Mass (m) = ? Gravity (g) = 9.8 m/s/s Formula: F = mg Formula: m = F/g Substitution: F = (75 kg)(9.8 m/s?) Substitution: m = 490 N/9.8 m/s² Answer: 3.
If you were inside a rocket that falls toward the event horizon, you would notice your own clock to be running __________.
Answers
If you were inside a rocket that falls toward the event horizon, you would notice your own clock to be running slower. This is due to the effect of gravity on time, as predicted by Einstein's theory of general relativity.
As the rocket gets closer to the black hole's horizon, the gravitational pull becomes stronger, causing time to slow down. This effect is known as time dilation, and it has been observed in experiments involving high-speed particles. So, if you were to observe someone outside the rocket, you would see their clock running faster than yours. If you were inside a rocket that falls toward the event horizon, you would notice your own clock to be running normally. However, an observer far away from the event horizon would see your clock running slower due to gravitational time dilation near the black hole.
Learn more about gravity here: brainly.com/question/31321801
#SPJ11
PART OF WRITTEN EXAMINATION:
A well-coated structure is defined as
A) 95% or better
B) 90% or better
C) 99% or better
D) 93% or better
Answers
A well-coated structure is defined as having a coating that meets a certain standard of quality. The answer to this particular question depends on the specific criteria being used to evaluate the coating. This would typically require a coating coverage of 90% or better, if not higher.
However, in general, a well-coated structure would typically refer to a surface that has been thoroughly and evenly covered with a coating material such as paint or varnish. This ensures that the underlying material is protected from environmental factors such as moisture and UV radiation. In addition, a well-coated structure can also improve the overall appearance of the surface, making it more aesthetically pleasing.
Regarding the options provided in the question, the answer would depend on the specific criteria being used to evaluate the coating. However, it is safe to say that a well-coated structure would require a high level of coating coverage, with minimal areas left uncovered or with an uneven application. This would typically require a coating coverage of 90% or better, if not higher. Ultimately, the specific answer would depend on the standards and expectations set by the evaluating body
learn more about the UV radiation refer: https://brainly.com/question/13849635
#SPJ11
A girl accelerates down a slide with a coefficient of friction equal to 0.10. What forces are responsible for her acceleration?
Answers
The forces responsible for the girl's acceleration down the slide are gravity and friction. Gravity pulls the girl downwards, while friction, with a coefficient of 0.10, opposes her motion and slows her acceleration.
The forces responsible for the girl's acceleration down the slide include both a gravitational force and a frictional force. The gravitational force is responsible for pulling the girl down the slide, while the frictional force is responsible for opposing the girl's motion down the slide.
The gravitational force is directly proportional to the mass of the girl, and it is directed downwards towards the center of the earth. This force acts on the girl regardless of whether she is on the slide or not.
The frictional force, on the other hand, is a force that opposes the motion of the girl down the slide.
The coefficient of friction (0.10 in this case) is a measure of the frictional force between two surfaces in contact. It is dependent on the materials that the surfaces are made of, as well as the roughness of the surfaces.
In this case, the frictional force between the girl and the slide is proportional to the normal force acting on the girl. The normal force is a force that is perpendicular to the surface of the slide, and it acts to counteract the force of gravity. As the girl accelerates down the slide, the normal force decreases, which in turn decreases the frictional force.
Learn more about gravitational force here:
https://brainly.com/question/12528243
#SPJ11
A steel bar 22mm x 30mm cross section is loaded axially in tension with F(t): ± 8KN. A 10mm hole passes thru the center of the 30mm side. Find the safety factor for infinite life if the material has σu = 500 Mpa Same as problem But with F(min) 8KN and F(max)-24KN. Find the safety factor for infinite life if the material has σu = 500 Mpa
Answers
The safety factor for infinite life is 9.74.
σ = F/A
A = (22 x 30) - (π/4 x 10²) = 660 - 78.54 = 581.46 mm²
σ = ± 8 x 10³/ 581.46 = ± 13.77 MPa
Kt = 1 + 2[tex](d/da)^{0.5}[/tex] + (d/da)²
In this case, d = 10 mm and da = 15 mm (half the width of the bar minus the radius of the hole):
Kt = 1 + [tex]2(10/15)^{0.5}[/tex] + (10/15)²= 2.58
The maximum stress in the bar can then be calculated as:
σmax = Kt x σ = 2.58 x 13.77 = 35.46 MPa
The safety factor for infinite life can now be calculated as:
SF = σu / σmax
where σu is the ultimate tensile strength of the material. In this case, σu = 500 MPa:
SF = 500 / 35.46 = 14.1
Therefore, the safety factor for infinite life is 14.1.
The minimum stress can be calculated in the same way as before:
σmin = -8 x 10³ / 581.46 = -13.77 MPa
The maximum stress can be calculated using the same equation as before, but with F = -24 KN:
σmax = Kt x (-24 x 10³ / 581.46) = -70.92 MPa
To combine the stresses, we use the von Mises criterion:
σVM = ((σmax - σmin)² + 3τ²)^0.5
where τ is the shear stress, which can be calculated as:
τ = F / (2A)
For this problem, τ is equal to:
τ = ± 8 x 10^3 / (2 x 581.46) = ± 6.88 MPa
Therefore, the von Mises stress is:
σVM = ((-70.92 + 13.77)² + 3(6.88)²)[tex]^{0.5 }[/tex]= 51.34 MPa
The safety factor for infinite life can now be calculated as before:
SF = σu / σVM = 500 / 51.34 = 9.74
The safety factor refers to the ratio of the maximum load that a system or structure can withstand to the actual load it experiences. It is a measure of the level of safety or margin of error built into a design to prevent failure or collapse under stress. For example, in engineering, the safety factor is commonly used to determine the strength of materials used in construction, such as bridges or buildings.
A higher safety factor means that the structure can withstand greater stress without failure, providing a greater level of safety. The safety factor is typically determined based on a number of factors, including the materials used, the design of the structure, and the expected loads and stresses that it will experience. A higher safety factor is generally preferred in situations where failure could have serious consequences, such as in aerospace or medical applications.
To learn more about Safety factor visit here:
brainly.com/question/13385350
#SPJ4
A physics teacher performs a demonstration for her students. She sits on a stool that rotates freely with an angular speed of 3.0 rev/s. The teacher holds 2.5 kg mass in each hand of her outstretched arms. Her arms about 0.80 meters from her center of rotation. The combined moment of inertia of the teacher is 5.6 kg*m^2 (this does not include the moment of inertia of the weights). This value remains constant. a. As the teacher pulls her arms inward, her angular speed increases to 3.6 rev/s. How far are the masses from the axis of rotation? b. Calculate the initial and final kinetic energies of the system.
Answers
A physics teacher rotates on a stool holding two 2.5 kg masses 0.8 meters away from the axis of rotation. She pulls her arms inward, and her angular speed increases from 3.0 to 3.6 rev/s. The masses end up being 1.13 meters from the axis of rotation, and the initial and final kinetic energies of the system are 94.08 J and 135.10 J, respectively.
a. To solve for the distance of the masses from the axis of rotation, we can use the conservation of angular momentum:
I1ω1 = I2ω2
where I is the moment of inertia and ω is the angular speed. Substituting in the values given:
I1ω1 = I2ω2
(5.6 kgm²)(3.0 rev/s) = (5.6 kgm²)(3.6 rev/s)
Solving for the distance of the masses (r):
I1ω1 = I2ω2
(5.6 kgm²)(3.0 rev/s) = (5.6 kgm²)(3.6 rev/s)
r1² + r2² = 0.8² + 0.8²
r = √(0.8² + 0.8²) = 1.13 meters
b. To solve for the initial and final kinetic energies, we can use the formula:
KE = (1/2)Iω²
where KE is the kinetic energy, I is the moment of inertia, and ω is the angular speed. Substituting in the values given:
Initial KE = (1/2)(5.6 kgm²)(3.0 rev/s)² = 94.08 J
Final KE = (1/2)(5.6 kgm²)(3.6 rev/s)² = 135.10 J
Therefore, the initial kinetic energy is 94.08 J and the final kinetic energy is 135.10 J.
To know more about the kinetic energy refer here :
https://brainly.com/question/26472013#
#SPJ11