Someone who gets pleasure out of hurting people online and starting conflicts and is a/an

Question 8 options:



advocate.




bystander.




troll.




positive digital citizen.

Answer:

Here is an example of how you could write this code:

numberOfIncompletes = 0;

for (int k = 0; k < nIncompletes; k++) {

if (incompletes[k] == studentID) {

numberOfIncompletes++;

}

}

In this code, we first initialize the numberOfIncompletes variable to 0. Then, we use a for loop to iterate through each element of the incompletes array. Inside the loop, we use an if statement to check if the current element is equal to the value of studentID. If it is, we increment the numberOfIncompletes variable by 1. After the loop completes, the numberOfIncompletes variable will contain the number of times studentID appears in the incompletes array.

C is answer because CMOS battery contains the main system settings as well as information, so I believe C is the best answer for this choice.

CMOS is an abbreviation for "Complementary Metal Oxide Semiconductor." The CMOS battery in your laptop powers the BIOS firmware [2]. Even if your computer is not plugged into a power source, the BIOS must remain operational. This is where the battery comes into play. It can no longer set the correct date and time if the battery fails, which is why it keeps resetting every time you shut down the device. Even if you enter the correct date and time in the BIOS settings, the time and date will be reset. By default, it will reset both the time and the date.

Here,

Because the CMOS battery contains both the main system settings and information, I believe C is the best answer for this choice.

To know more about CMOS battery,

https://brainly.com/question/26447509

#SPJ4

A single node in a network is identified by a unicast address. While anycast addresses can be used to identify many targets and transmit packets to the one that is closest, multicast addresses are used to broadcast messages to a collection of nodes. An anycast address, for instance, can be used to deliver a DNS request to a collection of DNS servers.

Sending messages or data from one single node to another uses a form of network addressing called unicast. On the internet, it is the most typical kind of network addressing. Each node on the network is given a distinct address as part of unicast addressing, which is used to distinguish the sender and receiver nodes. The address is used by the sender node to send a message to the receiver node, and by the receiver node to receive the message. The majority of applications use this one-to-one kind of communication. Every form of application, including VoIP, streaming video, and online browsing, uses unicast. Routing protocols and other network administration duties also use it.

To know more about Unicast Please click on the given link:

https://brainly.com/question/14969669

#SPJ4

The correct average function syntax for finding the average population of the cities in the spreadsheet is: =AVERAGE(C2:C11).

A function is a self-contained block of code that performs a specific task. It is often referred to as a procedure, a subroutine, or a routine. Functions are used to break down a program into manageable chunks of code that can be reused, leading to a more organized codebase. Functions can take input arguments and return values, which helps to make a program more flexible and allows for more efficient coding. Functions are also useful for organizing complex programs into smaller, easier-to-understand pieces. By allowing code to be broken down into smaller, self-contained chunks, programming becomes easier, faster, and more efficient.

To learn more about function
https://brainly.com/question/25741060
#SPJ4

Access is a relational database management system. In a relational database, you divide your data into distinct, topic-based tables. The data are then combined as needed using table relationships.

Using a relational database (RDB) allows you to organize data into tables, rows, and columns. An RDB can create links or relationships between data points by connecting tables. This makes it easy to understand and learn how different data points relate to one another.

RDBMS stands for Relational Database Management System. It is an information management system centered on a data model. In this case, tables accurately record all of the data. RDBMS examples include SQL Server, Oracle, MySQL, MariaDB, and SQLite.

A relational database management system is used to interact with data using the programming language SQL (Structured Query Language). SQL syntax is generally simple to create, comprehend, and interpret due to its similarity to English syntax.

Learn more about database management:

brainly.com/question/24027204

#SPJ4

The output of the application will be:

25

The main method of the application calls the lineLength method with an argument of 5, which invokes the second overloaded lineLength method that takes one argument.

Code refers to a set of instructions written in a programming language that a computer can understand and execute to perform a specific task or set of tasks. Code is written by a software developer and can range from a simple script to a complex software application.

This method calculates the square of its argument and returns the result, which is 5 * 5 = 25.

Learn more about coding: https://brainly.com/question/17204194

#SPJ4

A service endpoint

Explanation:

A service endpoint is a way to secure access to specific Azure resources by allowing only traffic from specific subnets or virtual networks to reach those resources. To ensure that VM1 can access storage1 over the Microsoft backbone, you should configure a service endpoint on the storage1 storage account, and then associate it with the virtual network or subnet that contains VM1. This will allow only traffic from that virtual network or subnet to reach storage1, and will ensure that VM1 can access storage1 securely and directly over the Microsoft backbone.

It is worth noting that, a VPN gateway is a way to connect an on-premises network to an Azure virtual network. The Azure Front Door service is a global, scalable, and highly available service that can be used to optimize the performance and security of your web applications. And a point to site (P2S) connection is a VPN connection that allows an individual client to connect to an Azure virtual network over the internet. In this case, none of these are the correct answer.

a. inputVal % k== 0 is intended to return the number of integers that evenly divide the integer inputVal. It use the concept of NumDivisor.

The "condition" in the for loop is used to check if the current value of k evenly divides inputVal. The modulus operator (%), when used with the equality operator (==), can be used to check for divisibility. Specifically, if inputVal % k == 0, it means that k is a divisor of inputVal (i.e. inputVal is evenly divisible by k) and the count variable is incremented by 1. The other options (b, c, d, and e) will not give the correct output for the intended purpose of the method.

Learn more about NumDivisor: https://brainly.com/question/29663677

#SPJ4

A cookie consent is a procedure whereby Web sites ask for your explicit permission before they can collect browsing history or other data.

A website may place small text files called cookies on a user's computer or mobile device. They are used to remember information about the user, such as login credentials, shopping cart contents, and browsing history. This information is then sent back to the website server each time the user visits the site or navigates to a different page on the site. Cookies can be used for a variety of purposes, such as personalizing the user's experience on the site, tracking their activity, or serving targeted advertisements. They are also used to maintain the state of the user's session, so that the website can remember the user's preferences and actions. Most web browsers allow users to manage their cookies, including the ability to delete or block them.

To know more about web sites visit:

https://brainly.com/question/9060926

#SPJ4

As a result, technology conditioning is nearly impossible to overcome. Winner describes a process of reverse adaptation, or the adjustment of human ends to match the character of the available means.

Conditioning is a type of learning in which (1) a given stimulus (or signal) becomes more effective at eliciting a response or (2) a response occurs with increasing regularity in a well-defined and stable environment. The outcome is determined by the type of reinforcement used. Classical conditioning and operant conditioning are two key concepts in behavioral psychology. Both classical and operant conditioning are behavioristic approaches to associative learning. For example, whenever you wear a baseball cap at home, you take your child to the park to play. So, whenever your child sees you bring home a baseball cap, he gets excited because he associates it with a trip to the park. This type of learning is known as classical conditioning.

Here,

As a result, overcoming technology conditioning is nearly impossible. Winner describes a process of reverse adaptation, or the adaptation of human ends to the characteristics of available means.

To know more about technology conditioning,

https://brainly.com/question/9171028

#SPJ4

A character literal is enclosed in single quotation marks, whereas a string literal is enclosed in double quotation marks. A character literal is a single character enclosed in single quotation marks in programming languages like C, C++, and Java.

A character literal is a single character enclosed in single quotation marks, for example 'a' or 'b'. A string literal, on the other hand, is a sequence of characters enclosed in double quotation marks, for example "hello" or "world". In programming languages like C, C++, and Java, a character literal is denoted by single quotes (') and a string literal is denoted by double quotes ("). It is used to represent a specific character in the code, such as a letter, number or symbol. For example, 'a' is a character literal representing the letter 'a', or '$' is a character literal representing the symbol '$'.

Learn more about character literal: https://brainly.com/question/28302970

#SPJ4

[M¹L²T⁻³A⁻²] is the unit of measurement for each parameter.

We now understand that capacitance has the capacity to store energy as an electric field. The capacity to store energy in the form of a magnetic field is known as inductance, and it is expressed in henries and represented by the symbol L.

Therefore, the primary distinction between ideal resistors and ideal inductors is that the former dissipate electrical energy as heat while the latter convert it into a magnetic field. Zero reactance and zero inductance are characteristics of ideal resistors.

A series connection of an inductor L and a resistor R across a 12 V, 50 Hz supply results in a circuit current of 0.5 A. The phase difference between the applied voltage and the current is pi/3.

Since according to Ohm's Law :

V=IR

Hence, R= V / I

Where V= [tex]\frac{work \ done}{charge}[/tex]

Hence; Potential = [M¹L²T⁻³A⁻²]

Learn more about Resistance (R), Capacitance (C), and Inductance (L) refer to :

brainly.com/question/29884852

#SPJ1

In this code, we are reading in a 2-character string from input into the variable userCode.

A variable is a named location in a computer's memory that can store a value and be changed as needed. Variables are used in programming to store information such as numbers, text, and other data. They are essential for programming because they allow a program to store data while the program is running and modify the data as needed.

The variable nouppercase is declared as a boolean and is set to true if userCode does not contain any uppercase letters. Otherwise, the variable nouppercase is set to false. This code utilizes the getline() function to read the entire line from input into userCode. After the string is read, an if statement is used to check whether or not userCode contains any uppercase letters. If not, the output is "Passcode accepted", otherwise, the output is "Passcode not accepted".

To learn more about variable
https://brainly.com/question/29883906
#SPJ4

To improve the security of sensitive information are: (A) Setting a passcode, (B) Encrypting data , (C) Downloading a security app.

Data is information that has been processed and organized into a convenient form for further analysis. Data can be in the form of numbers, words, measurements, observations, or even just descriptions of things. Data has the potential to reveal patterns, trends, and correlations, allowing us to draw conclusions, make predictions, and make decisions. Data is typically collected through surveys, experiments, or other methods, and stored in databases or spreadsheets. Data can be analyzed using a variety of techniques, such as statistical analysis, machine learning, natural language processing, and visualizations.

To learn more about data
https://brainly.com/question/25704927
#SPJ4

Here is the code that can help you create the frequency distribution and relative frequency distribution tables in Python.

majors = "AMMAMMMEMOAEEMAMAEOMAMAEEMAM"

# Frequency distribution

freq_dist = {}

for major in majors:

   if major in freq_dist:

       freq_dist[major] += 1

   else:

       freq_dist[major] = 1

# Relative frequency distribution

total_students = len(majors)

rel_freq_dist = {k: v/total_students for k, v in freq_dist.items()}

# Print frequency distribution and relative frequency distribution

print("Frequency Distribution:")

print(freq_dist)

print("\nRelative Frequency Distribution:")

print(rel_freq_dist)

The output will show the frequency of each major in the list and their relative frequency as a proportion of the total number of students.

Code refers to a set of instructions written in a programming language that a computer can understand and execute to perform a specific task or set of tasks. Code is written by a software developer and can range from a simple script to a complex software application.

Learn more about coding: https://brainly.com/question/20712703

#SPJ4

While the staff person would like to access all of the SSN and dob fields, they are unable to reverse the queried data. The HMO uses the Safe Harbor approach for de-identification in order to protect patient data.

De-identification is the process of finding identifiers that relate to a person (or other entity) either directly or indirectly and deleting them from the data Safe Harbor method.

In order to comply with the HIPAA Privacy Rule's de-identification requirement, covered companies or business partners must eliminate personal information from their systems.

Therefore, the Safe Harbor method is used.

Learn more about the Safe Harbor method, here:

https://brainly.com/question/13120522

#SPJ1

Answer: data masking

Explanation: final

on the CPU (Central Processing Unit). in the computer's [ select ] until you initiate a save command.

The changes you make to a file when using a web service are saved immediately.Regardless of the file type, all file properties are identical.What is the name of the temporary Microsoft storage location

On Windows computers, by default, all document-related objects, such as word processors and spreadsheet documents, automatically save to your My Downloads folder.We suggest keeping all papers in the this folder to make it easier and save all of your crucial info.

To know more about temporarily stored visit:

https://brainly.com/question/27999178

#SPJ4

Digital photography requires a digital camera, computer and photo-editing software, instead of chemicals or a darkroom, making it a simpler process than film photography.

Digital photography is a much simpler process than traditional film photography. It requires a digital camera, computer, and photo-editing software, while film photography requires chemicals and a darkroom to develop the photos. Digital photography also eliminates the need to purchase and store film, as well as the cost of having photos professionally developed. Additionally, digital photos can be easily shared and manipulated, making it easier for photographers to create unique looks and effects. In contrast, film photos must be physically manipulated to achieve the desired effect, and it is much more difficult to share and store film photos. Overall, digital photography is a simpler and more cost-effective way to capture and manipulate photos.

Learn more about computers here:

brainly.com/question/30206316

#SPJ4

The UNION operator is used to combine the result-set of two or more SELECT statements. Every SELECT statement within UNION must have same number of columns.

The required details for UNION operator in given paragraph

SELECT 'SHIPPED' AS Ship Status,

Order Id, Order Date

FROM Orders

WHERE Ship Date IS NOT NULL

UNION

SELECT 'NOT SHIPPED', Order ID, Order Date

FROM Orders

WHERE Ship Date IS NULL

ORDER BY Order Date

The columns must also have similar data types. The columns in every SELECT statement must also be in same order. To use UNION in SQL, we must always remember, Column count in all tables must be same. For example, Teachers and Students both tables have three columns. The data types of columns must be same. For example, the age column in Teachers is integer, so is the age in Students table.

The columns must be in same order in each table. For example, the order of columns is id-name-age in Teachers, so in the Students table

learn more about union operator at

brainly.com/question/3787485

#SPJ4

The class  code is given below

lass Date:

   def __init__(self, month, day, year):

       self.month = month

       self.day = day

       self.year = year

   def setMonth(self, month):

       self.month = month

   def setDay(self, day):

       self.day = day

   def setYear(self, year):

       self.year = year

   def getMonth(self):

       return self.month

   def getDay(self):

       return self.day

   def getYear(self):

       return self.year

   def displayDate(self):

       print(self.month, '/', self.day, '/', self.year)

def main():

   # create an object of Date class

   date1 = Date(1, 15, 2021)

   # display the date using the displayDate method

   date1.displayDate()

   # change the month using the setMonth method

   date1.setMonth(2)

   # display the date again

   date1.displayDate()

if __name__ == "__main__":

   main()

The above code will create a class called Date that includes three instance variables a month, a day and a year. It has a constructor that initializes the three instance variables and assumes that the values provided are correct.

It also has set and get methods for each instance variable and a method displayDate that displays the date in the format month/day/year.

Therefore, The main method demonstrates the use of the class by creating an object of the class and displaying the date, then changing the month and displaying the date again.

Learn more about class from

https://brainly.com/question/11842604

#SPJ1

I would recommend using Azure Bastion. Azure Bastion uses multi-factor authentication, which helps to further minimize the exposure of virtual machines on the internet.

Azure Bastion is known as fully managed service that has allows you to remotely the access your virtual machines that securely just via the Remote Desktop Protocol (RDP) or the Secure Shell (SSH) directly from the Azure portal.

This simply means that one or you can access the virtual machines just without having to just expose them directly to the internet, as the connection has been made through Azure's infrastructure.

Therefore, I would recommend using Azure Bastion. Azure Bastion uses multi-factor authentication, which helps to further minimize the exposure of virtual machines on the internet.

Learn more about internet on:

https://brainly.com/question/14823958

#SPJ1

Here is an Program of a C++ program that performs addition, subtraction, multiplication, and inversion of real number arrays, including their trace calculation, using an external header file:

matrix_ops.h

#include <iostream>

const int MAX_SIZE = 10;

class Matrix {

   private:

       int rows;

       int cols;

       double data[MAX_SIZE][MAX_SIZE];

   public:

       Matrix(int r, int c);

       Matrix operator+(Matrix other);

       Matrix operator-(Matrix other);

       Matrix operator*(Matrix other);

       Matrix operator~();

       double trace();

       void print();

};

#endif

To use an external header file in a C++ program, you can include it using the preprocessor directive "#include" followed by the name of the header file in quotes. For example:

#include "matrix_ops.h"

This tells the compiler to include the contents of the header file "matrix_ops.h" in the program.

You can also include external header files with angle brackets, this is useful when you are including a library that is installed in the system.

#include <iostream>

matrix_ops.cpp - External Header file

#include "matrix_ops.h"

#include <cmath>

Matrix::Matrix(int r, int c) {

   rows = r;

   cols = c;

   for (int i = 0; i < rows; i++) {

       for (int j = 0; j < cols; j++) {

           data[i][j] = 0;

       }

   }

}

Matrix Matrix::operator+(Matrix other) {

   if (rows != other.rows || cols != other.cols) {

       std::cout << "Error: matrices have different dimensions" << std::endl;

       return *this;

   }

   Matrix result(rows, cols);

   for (int i = 0; i < rows; i++) {

       for (int j = 0; j < cols; j++) {

           result.data[i][j] = data[i][j] + other.data[i][j];

       }

   }

   return result;

}

Matrix Matrix::operator-(Matrix other) {

   if (rows != other.rows || cols != other.cols) {

       std::cout << "Error: matrices have different dimensions" << std::endl;

       return *this;

   }

   Matrix result(rows, cols);

   for (int i = 0; i < rows; i++) {

       for (int j = 0; j < cols; j++) {

           result.data[i][j] = data[i][j] - other.data[i][j];

       }

   }

   return result;

}

Matrix Matrix::operator*(Matrix other) {

   if (cols != other.rows) {

       std::cout << "Error: matrices have incompatible dimensions" << std::endl;

       return *this;

   }

   Matrix result(rows, other.cols);

   for (int i = 0; i < result.rows; i++) {

       for (int j = 0; j < result.cols; j++) {

           for (int k = 0; k < cols; k++) {

               result.data[i][j] += data[i][k] * other.data[k][j];

           }

       }

   }

   return result;

}

Matrix Matrix::operator~() {

   if (rows != cols) {

       std

Know more about the Header Files:-

https://brainly.in/question/1978221

An important part of dashboard design is the placement of charts, graphs, and other visual elements. They should be visually appealing, which means that they are balanced and make good use of available space.

Visual design elements refer to the various components or building blocks that are used to create visual compositions. These elements include things such as color, shape, form, texture, and typography, and they can be used in various combinations to create visual designs that are pleasing to the eye, convey a particular message or emotion, or serve a specific function.

An example of visual design is the layout and design of a website. The website's layout is based on visual design elements such as the use of white space, the alignment of elements, the use of typography and color to create a hierarchy of information, and the use of images and graphics to enhance the overall visual appeal of the website. The website's design should be visually pleasing and easy to navigate, while also effectively communicating the message and goals of the website. Another example could be a poster design for a movie, where visual design elements such as typography, composition, imagery, color, and hierarchy are used to create a visually engaging and informative poster that effectively promotes the movie.

To know more about typography visit:

https://brainly.com/question/5755904

#SPJ4

Users can upload a variety of files and URLs to the DATABASE to consolidate the storage of property documentation.

In computing, a database is a structured set of data that is accessible and stored electronically.

Small databases can be kept on a file system, while large databases are kept on computer clusters or in the cloud.

The design of databases includes factors like data modeling, efficient data representation and storage, query languages, security and privacy of sensitive data, and distributed computing difficulties like concurrent access and fault tolerance.

A database management system (DBMS) interacts with applications, end users, and the database itself in order to gather and handle data.

The DBMS software also includes the main management tools for the database.

Hence, Users can upload a variety of files and URLs to the DATABASE to consolidate the storage of property documentation.

learn more about database click here:

https://brainly.com/question/518894

#SPJ4

Answer: Use the Pythagoras theorem

Explanation:

I'm gonna explain how to calculate the distance between two points in a 2-dimensional space.

According to the Pythagoras theorem, you can use this formula:

[tex]\sqrt{a^2+b^2}[/tex]

where [tex]a[/tex] and [tex]b[/tex] are the horizontal and vertical distances.

If your points are represented in coordinates (eg. [tex]x[/tex] and [tex]y[/tex]) you can get [tex]a[/tex] and [tex]b[/tex] by calculating the difference between each point coordinates:

Let's say you've got point P1=(1,4) and point P2=(5,6).

This means the [tex]x[/tex] coordinate of point P1 is 1 and the [tex]x[/tex] coordinate of point P2 is 5. The difference is:

[tex]a = 5 - 1 = 4[/tex]

Note that since these distances are then powered by 2, we do not care about the order of the operands nor the sign.

The difference between the  [tex]y[/tex] coordinates is:

[tex]b = 6 - 4 = 2[/tex]

Finally, we can apply the Pythagoras theorem above to calculate the distance:

[tex]distance = \sqrt{a^2+b^2} = \sqrt{4^2+2^2} = \sqrt{16+4} = \sqrt{20}[/tex]

To calculate the distance between two points using math functions, we can use the Pythagorean theorem.

Pythagorean theorem states that in a right triangle, the sum of the squares of the lengths of the legs (the sides that form the right angle) is equal to the square of the length of the hypotenuse (the side opposite the right angle).

Here are the steps to calculate the distance between two points using the Pythagorean theorem:

Thus, this way, one can calculate the distance between two points.

For more details regarding Pythagorean theorem, visit:

https://brainly.com/question/14930619

#SPJ2

D. RAID 10 array is the most appropriate option for this scenario. RAID 10 provides both data redundancy and increased performance by using a combination of mirroring and striping. This ensures that if a drive fails, the data can still be accessed from the mirrored drive.

What is RAID 10?

RAID 10, also known as RAID 1+0, is a type of RAID configuration that combines the features of RAID 1 (mirroring) and RAID 0 (striping). In a RAID 10 setup, data is mirrored across multiple disks and then striped across those mirrored sets of disks.

This provides both redundancy and increased performance, as the data can be read from multiple disks simultaneously. However, RAID 10 requires a minimum of 4 disks and will lose half the storage capacity to the mirroring. It is often used in situations where data integrity and high performance are both important.

To learn more about RAID, visit: https://brainly.com/question/29039401

#SPJ4

Yes, The method header specifies the modifiers, return value type, method name and parameters of the method.

The method header in the example you provided specifies the following:

Modifiers: public static

Return value type: int (indicating the method returns a value of type int)

Method name: max

Formal parameters: int num1, int num2 (declaring the type and name of each parameter that the method takes as input)

It's important to note that the method header only specifies what the method does and does not include the method body.

The method header is the first line of a method in a class or object-oriented programming language. It specifies the name, return type, and parameters of the method, and it may include modifiers such as access modifiers (e.g., public, private) or other keywords (e.g., static, abstract). The method header is followed by the method body, which contains the code that is executed when the method is called.

The general syntax of a method header is:

[access-modifier] [modifiers] [return-type] method-name

access-modifier: specifies the accessibility of the method, such as public, private, protected.

modifiers: additional keywords that can be used to modify the method, such as static, final, abstract.

return-type refers to the data type of the value that the method returned. The return type is void if the method returns nothing.

method-name: a valid identifier that represents the name of the method.

parameter-list: a comma-separated list of parameters that the method takes as input. Each parameter is defined by its data type and name.

Learn more about access-modifier here:

https://brainly.com/question/29222161

#SPJ4

The Java JDK is made up of several independent applications that may each be launched from a command line and used to create and test Java programmes.

The Java programming language's class and interface definitions are read by the javac command and converted into bytecode class files. Annotations in Java classes and source code can also be processed by the javac command. The most crucial piece of computer software is the operating system. It controls all of the computer's hardware and software as well as the memory and processes.

The javac command processes source files containing module, package, and type declarations written in the Java programming language to create class files that may be executed by the Java Virtual Machine. Annotations in Java classes and source code can also be processed by the javac command. As soon as a Java application is compiled, bytecode is generated, which is why Java is platform-independent.

Therefore the correct answer is option A ) Java JDK .

To learn more about Java JDK refer to :

https://brainly.com/question/28901953

#SPJ4

Python program that shows the repeated elements of two lists on the screen. Output image of the algorithm is attached.

if __name__ == '__main__':

list3 = int()

x = int()

list1 = int()

list2 = int()

e = int()

p = int()

e = 1

list1 = [int() for ind0 in range(5)]

list2 = [int() for ind0 in range(5)]

list3 = [int() for ind0 in range(5)]

print("First List:  ")

for a in range(1,6):

 print("item",a, end=": ")

 list1[a-1] = int(input())

print("Second List:  ")

for a in range(1,6):

 print("item",a, end=": ")

 list2[a-1] = int(input())

for a in range(1,6):

 p = 0

 for b in range(1,6):

  if list1[a-1]==list2[b-1]:

   p = p+1

 if p>=1:

  list3[e-1] = list1[a-1]

  e = e+1

print("Third list: ")

for a in range(1,e):

 p = 0

 for b in range(a,e):

  if list3[a-1]==list3[b-1]:

   p = p+1

 if p==1:

  print(list3[a-1])

To learn more about remove duplicates in list see: https://brainly.com/question/21306580

#SPJ4