There are 100,000 possible five-digit student ID numbers that can be created if repeat digits are allowed (10^5).
However, if repeats are not allowed, there are only 9 x 9 x 9 x 9 x 9 = 590,490 possible student ID numbers that can be created (9^5).
The reason for the difference is that when repeats are allowed, you can use the same digit multiple times, for example "11111".
When repeats are not allowed, you can only use each digit once, for example "12345". The possible permutations of the digits 0-9 increase as more digits are added to the ID number, meaning that the more digits there are, the more possible combinations there are.
Therefore, when repeats are not allowed, the number of possible combinations is reduced significantly. In the case of five-digit student ID numbers, the difference is almost twofold.
To know more about combinations click on below link:
https://brainly.com/question/20211959#
#SPJ11
in the number 240.149, how does the value of the 4 in the hundredths place compare to the value of the 4 in the tens place?
The 4 in the hundredths place has a smaller value than the 4 in the tens place.
In the decimal number system, each digit to the left of the decimal point represents a power of 10, starting with 10^0 = 1 for the rightmost digit. Each digit to the right of the decimal point represents a negative power of 10, with the place value decreasing as you move farther to the right.
In the number 240.149, the 4 in the tens place represents 4 x 10 = 40. The 4 in the hundredth place represents 4/100 or 0.04, which is smaller than 40. Therefore, the 4 in the tens place has a greater value than the 4 in the hundredths place.
Hence, the value of a digit in a decimal number depends on its position relative to the decimal point. Digits to the left of the decimal point represent whole numbers, while digits to the right of the decimal point represent fractions or parts of a whole.
To know more about the decimal number system, refer here:
https://brainly.com/question/30477589#
#SPJ11
alexis puts dimes and quarters aside for the parking meter. she has a total of 20 coins and they are worth $3.80. how many quarters does alexis have?
Alexis has 12 quarters and 8 dimes.
Let's use d to represent the number of dimes and q to represent the number of quarters. We know that Alexis has a total of 20 coins, so d + q = 20.
We also know that the value of these coins is $3.80. Since dimes are worth $0.10 and quarters are worth $0.25, we can write an equation for the total value in cents:
10d + 25q = 380
To make things easier, let's divide both sides of the equation by 5:
2d + 5q = 76
Now we can use the first equation to solve for d in terms of q:
d + q = 20
d = 20 - q
Substituting this into the second equation gives:
2(20 - q) + 5q = 76
Expanding the parentheses and simplifying, we get:
40 - 2q + 5q = 76
3q = 36
q = 12
Therefore, Alexis has 12 quarters. We can check this by plugging q back into the first equation to find that she has 8 dimes as well:
d + q = 20
d + 12 = 20
d = 8
The total value of 12 quarters and 8 dimes is:
12 quarters x $0.25 per quarter + 8 dimes x $0.10 per dime = $3.00 + $0.80 = $3.80
To know more about quarters and dimes refer here:
https://brainly.com/question/6500943#
#SPJ11
a bond is worth 100$ and grows in value by 4 percent each year. f(x) =
To represent the value of the bond after x years, we can use the function:f(x) = 100 * (1 + 0.04)^xwhere x is the number of years the bond has been held.The expression (1 + 0.04) represents the growth factor of the bond per year, since the bond grows in value by 4 percent each year. By raising this factor to the power of x, we obtain the cumulative growth of the bond over x years.Multiplying the initial value of the bond, 100$, by the growth factor raised to the power of x, gives us the value of the bond after x years. This is the purpose of the function f(x).
rotate 270 degrees…what are the coordinates of B
PLS HELP
Answer:
8;-2
Step-by-step explanation:
8 is the x axis and -2 is the y axis
Answer:
Step-by-step explanation:
a study indicates that the weights of adults are normally distributed with a mean of 140 lbs and a standard deviation of 25 lbs. what is the probability that a randomly selected adult weights between 120 and 165 lbs?
The probability that a randomly selected adult weighs between 120 and 165 lbs is approximately 0.8186.
Since the weights of adults are normally distributed with a mean of 140 lbs and a standard deviation of 25 lbs, we can use the standard normal distribution to calculate the probability.
We first need to standardize the values using the formula: z = (x - μ) / σ, where x is the weight, μ is the mean, and σ is the standard deviation.
For x = 120 lbs, z = (120 - 140) / 25 = -0.8, and for x = 165 lbs, z = (165 - 140) / 25 = 1.0. We can then use a calculator to find the probability between -0.8 and 1.0, which is approximately 0.8186.
Thus, the chance of picking an adult at random who weighs between 120 and 165 lbs is roughly 0.8186.
To know more about normally distributed refer here:
https://brainly.com/question/29509087#
#SPJ11
A quality control inspector will measure the salt content (in milligrams) in a random sample of bags of potato chips from an hour of production. Which of the following would result in the smallest margin of error in estimating the mean salt content, u? A. 90% confidence, n = 25 B. 90% confidence, n = 50 C. 95% confidence, n = 25 D. 95% confidence, n = 50 E. n = 100 at any confidence level
The option that would result in the smallest margin of error in estimating the mean salt content, u, is 95% confidence, n = 50. The correct answer is Option D.
What is the margin of error?The margin of error is the amount by which a statistic is expected to differ from the true value of the population parameter. The interval estimate is calculated with the help of a margin of error. The margin of error and the interval estimate are inversely related to each other. If we want a small margin of error, we must increase the sample size.
What is the confidence level?The confidence level is the likelihood that a population parameter will fall within a specified range of values. The confidence level is determined by the sample size and margin of error. The sample size and margin of error are directly related to each other. When the sample size is smaller, the margin of error is larger. When the sample size is larger, the margin of error is smaller.
How to determine the smallest margin of error?The margin of error is the highest at a confidence level of 50%. In general, as the confidence level increases, the margin of error decreases, and vice versa. As the sample size increases, the margin of error decreases. It follows that a 95% confidence level, n = 50 would yield the smallest margin of error in estimating the mean salt content, u. Hence, option D) 95% confidence, n = 50 would result in the smallest margin of error in estimating the mean salt content, u.
Learn more about margin of error here: https://brainly.com/question/29328438
#SPJ11
Quadrilateral ABCD is inscribed in this circle.
What is the measure of angle B?
A circle with radius of 2 cm sits inside a circle with of 4 cm
Answer:
Diameter is equal to twice the radius. Given, radius is 4 cm. Diameter = 2(4) = 8 cm. Hence, diameter of the circle with radius as 4 cm is 8 cm.
Step-by-step explanation:
please
give brianliest
Answer: Area = 0
Step-by-step explanation:
((2*2)*3.14)-(4*3.14) = 0
from an unlimited selection of five types of soda, one of which is dr. pepper, you are putting 25 cans on a table. determine the number of ways you can select 25 cans of soda if you must include at least seven dr. peppers..
There are 5²⁵ possible ways to select 25 cans of soda from 5 types, while there are [5¹⁸] (25 choose 7) possible ways to select 25 cans with at least 7 Dr. Peppers, and only [3²²] (25 choose 3) possible ways to select 25 cans with only 3 Dr. Peppers available.
(a) Since there are five types of soda and we are selecting 25 cans, we can choose any type of soda for each can. Therefore, the number of ways to select 25 cans of soda is 5²⁵.
(b) If we must include at least seven Dr. Peppers, then we can choose the remaining 18 cans from any of the five types of soda (including Dr. Pepper). We can choose 7 Dr. Peppers in (25 choose 7) ways. Therefore, the number of ways to select 25 cans of soda with at least seven Dr. Peppers is (25 choose 7) [5¹⁸].
(c) If there are only three Dr. Peppers available, then we must choose all three Dr. Peppers and select the remaining 22 cans from the four types of soda (excluding Dr. Pepper). We can choose the remaining 22 cans in 4²² ways. Therefore, the number of ways to select 25 cans of soda with only three Dr. Peppers available is 3 [4²²].
Learn more about Combinatorics here: brainly.com/question/13261685
#SPJ4
Complete question:
From an unlimited selection of five types of soda, one of which is Dr. Pepper, you are putting 25 cans on a table.
(a) Determine the number of ways you can select 25 cans of soda.
(b) Determine the number of ways you can select 25 cans of soda if you must include at least seven Dr. Peppers.
(c) Determine the number of ways you can select 25 cans of soda if it turns out there are only three Dr. Peppers available.
A pharmacist mixes 10 grams of a 15% medicine solution with 25 grams of a 10% medicine solution. Suppose we know that after she adds the x grams of pure medicine the pharmacists mixture is 25% medicine solution. Write an equation
The equation that represents the situation is (4 + x) / (10 + 25 + x) = 0.25
Let's start by finding the amount of medicine in the original mixture before adding any pure medicine.
The amount of medicine in the 10 grams of 15% solution is
0.15 × 10 = 1.5 grams
The amount of medicine in the 25 grams of 10% solution is
0.10 × 25 = 2.5 grams
So the total amount of medicine in the original mixture is,
1.5 + 2.5 = 4 grams
Now let x be the amount of pure medicine added.
The total amount of medicine in the final mixture is,
4 + x
The total amount of solution in the final mixture is,
10 + 25 + x
So the concentration of the final mixture is,
(4 + x) / (10 + 25 + x)
We know that this concentration is 25%, so we can write:
(4 + x) / (10 + 25 + x) = 0.25
This is the equation that represents the situation.
Learn more about equation here
brainly.com/question/14603452
#SPJ4
The given question is incomplete, the complete question is:
A pharmacist mixes 10 grams of a 15% medicine solution with 25 grams of a 10% medicine solution. Suppose we know that after she adds the x grams of pure medicine the pharmacists mixture is 25% medicine solution. Write an equation that represents the situation
In an arithmetic sequence, the tenth term is 28. The sum of term 5 and term 7 is 32. Calculate the sum of the first 50 terms
The sum of the first 50 terms is 3775. Let a be the first term and d be the common difference of the arithmetic sequence.
Then, the tenth term is a + 9d = 28, and the sum of the fifth and seventh terms is 2a + 12d = 32.
Solving these equations simultaneously, we get a = 2 and d = 3.
To find the sum of the first 50 terms, we use the formula for the sum of an arithmetic sequence:
S50 = (50/2)(2a + (50-1)d) = 25(2 + 49(3)) = 3775.
Find out more about arithmetic sequence
brainly.com/question/15412619
#SPJ4
What is the greatest common factor of 78 and 42?
Answer: 6
Step-by-step explanation:
The factors of 42 are: 1, 2, 3, 6, 7, 14, 21, 42
The factors of 78 are: 1, 2, 3, 6, 13, 26, 39, 78
Then the greatest common factor is 6.
Heres something you need to learn about the greatest common factor (gcf)
What is the Greatest Common Factor?
The largest number, which is the factor of two or more numbers is called the Greatest Common Factor (GCF). It is the largest number (factor) that divide them resulting in a Natural number. Once all the factors of the number are found, there are few factors that are common in both. The largest number that is found in the common factors is called the greatest common factor. The GCF is also known as the Highest Common Factor (HCF)
Let us consider the example given below:
Greatest Common Factor (GCF)
For example – The GCF of 18, 21 is 3. Because the factors of the number 18 and 21 are:
Factors of 18 = 2×9 =2×3×3
Factors of 21 = 3×7
Here, the number 3 is common in both the factors of numbers. Hence, the greatest common factor of 18 and 21 is 3.
Similarly, the GCF of 10, 15 and 25 is 5.
How to Find the Greatest Common Factor?
If we have to find out the GCF of two numbers, we will first list the prime factors of each number. The multiple of common factors of both the numbers results in GCF. If there are no common prime factors, the greatest common factor is 1.
Finding the GCF of a given number set can be easy. However, there are several steps need to be followed to get the correct GCF. In order to find the greatest common factor of two given numbers, you need to find all the factors of both the numbers and then identify the common factors.
Find out the GCF of 18 and 24
Prime factors of 18 – 2×3×3
Prime factors of 24 –2×2×2×3
They have factors 2 and 3 in common so, thus G.C.F of 18 and 24 is 2×3 = 6
Also, try: GCF calculator
GCF and LCM
Greatest Common Factor of two or more numbers is defined as the largest number that is a factor of all the numbers.
Least Common Multiple of two or more numbers is the smallest number (non-zero) that is a multiple of all the numbers.
Factoring Greatest Common Factor
Factor method is used to list out all the prime factors, and you can easily find out the LCM and GCF. Factors are usually the numbers that we multiply together to get another number.
Example- Factors of 12 are 1,2,3,4,6 and 12 because 2×6 =12, 4×3 = 12 or 1×12 = 12. After finding out the factors of two numbers, we need to circle all the numbers that appear in both the list.
Greatest Common Factor Examples
Example 1:
Find the greatest common factor of 18 and 24.
Solution:
First list all the factors of the given numbers.
Factors of 18 = 1, 2, 3, 6, 9 and 18
Factors of 24 = 1, 2, 3, 4, 6, 8, 12 and 24
The largest common factor of 18 and 24 is 6.
Thus G.C.F. is 6.
Example 2:
Find the GCF of 8, 18, 28 and 48.
Solution:
Factors are as follows-
Factors of 8 = 1, 2, 4, 8
Factors of 18 = 1, 2, 3, 6, 9, 18
Factors of 28 = 1, 2, 4, 7, 14, 28
Factors of 48 = 1, 2, 3, 4, 6, 8, 12, 16, 24, 48
The largest common factor of 8, 18, 28, 48 is 2. Because the factors 1 and 2 are found all the factors of numbers. Among these two numbers, the number 2 is the largest numbers. Hence, the GCF of these numbers is 2.
If you know it, dont read it
What is measure of angle r?
help this needs to be done, please
The measure of angle R in ΔSRT which is drawn inside the circle is 77.5°.
What is circles?Circle is a two-dimensional shape that is defined as the set of all points that are equidistant from a central point. It is often represented as a round shape with a curved boundary.
Since SR is a diameter of the circle, it follows that angle STR is a right angle (90°). Therefore, we can find the measure of angle SRT using the following equation:
∠SRT + ∠STR = 180°
(2x-23°) + 90° = 180°
2x + 67° = 180°
2x = 180° - 67°
2x = 113°
x = 56.5°
∠TRS = 5x-97°
∠TRS = 5(56.5°)-97°
∠TRS = 192.5°
Finally, we can find the measure of angle SRT:
∠SRT = 180° - ∠STR - ∠TRS
∠SRT = 180° - 90° - 192.5°
∠SRT = -102.5°
Therefore, to find the measure of angle R, we need to add 180° to angle SRT:
∠R = ∠SRT + 180°
∠R = -102.5° + 180°
∠R = 77.5°
To know more about angle visit:
https://brainly.com/question/13483158
#SPJ1
The following statement should determine if x is not greater than 20. Explain what is wrong with it and write the correction. if (!x > 20)
The student's original statement has an issue in the way the "not" operator is used. The "not" operator (!) is negating the entire expression, including the variable 'x', rather than just the inequality. This leads to incorrect evaluation.
To correctly determine if x is not greater than 20, you should use the "less than or equal to" (<=) operator instead. Here is the corrected statement:
if (x <= 20)
This statement will be true if x is less than or equal to 20, which is the intended condition.
for such more questions on inequality
https://brainly.com/question/24372553
#SPJ11
coupling tetraalkylammonium and ethylene glycol ether side chain to enable highly soluble anthraquinone-based ionic species for nonaqueous redox flow battery
Coupling tetraalkylammonium and ethylene glycol ether side chain is an effective method to enable highly soluble anthraquinone-based ionic species for nonaqueous redox flow battery. The side chains of the tetraalkylammonium are modified with the ethylene glycol ether, which is a highly polar solvent, allowing for better solubility in nonaqueous electrolyte solutions. Additionally, the ethylene glycol ether has the ability to modify the stability of the ionic species, preventing aggregation and ensuring the longevity of the battery. This increases the redox capacity and enhances the performance of the flow battery.
The ethylene glycol ether-tetraalkylammonium coupling has been proven to be an effective method for improving the solubility and stability of anthraquinone-based ionic species. For example, it has been observed that the coupling of ethylene glycol ether to anthraquinone-based ionic species enhanced the current density of the battery by more than 3 times. Furthermore, the coupling process has also been found to improve the energy efficiency and storage capacity of the nonaqueous redox flow battery.
Overall, coupling tetraalkylammonium and ethylene glycol ether side chain is an effective method for enabling highly soluble anthraquinone-based ionic species for nonaqueous redox flow battery. This process has been proven to improve the performance of the battery, including current density, energy efficiency, and storage capacity.
for such more questions on solubility
https://brainly.com/question/23946616
#SPJ11
A plane ticket to Barcelona cost £175 the price decreases by 6% work out the new price of the plane ticket
Answer:
£164.50
Step-by-step explanation:
If the discount is 6%, then the discounted price is 94% of the original price.
95% of £175 = 0.94 × £175 = £164.50
A particle of mass 1. 2 kg is moving with speed of 8 ms inn a straight line on a horizontal table. A resistance force is app. Lied to the particle in the direction of the motion. The magnitude of the force is proportional to the square of the speed, ao that F=0,3v^2
The speed of the particle is 8 m/s, the force of resistance is [tex]0.3(8)^2[/tex], or 19.2 N.
A particle of mass 1.2 kg is moving with a speed of 8 m/s in a straight line on a horizontal table. A resistance force is applied to the particle in the direction of the motion. The magnitude of the force is proportional to the square of the speed, such that [tex]F=0.3v^2[/tex]
The force of resistance is an opposing force that acts to reduce the speed of the particle. As the particle moves faster, the resistance force increases. The force is proportional to the square of the speed, meaning that if the speed doubles, the force is multiplied by four. The force is also in the same direction as the motion, meaning that it will reduce the speed of the particle.
The equation for the force of resistance is [tex]F=0.3v^2[/tex], where v is the speed of the particle. Therefore, if the speed of the particle is 8 m/s, the force of resistance is [tex]0.3(8)^2,[/tex] or 19.2 N. This means that the force of resistance acting on the particle is 19.2 N.
for such more question on resistance
https://brainly.com/question/28135236
#SPJ11
Jaxon invested $710 in an account paying an interest rate of 8\tfrac{7}{8}8 8 7 % compounded quarterly. Jason invested $710 in an account paying an interest rate of 8\tfrac{5}{8}8 8 5 % compounded continuously. After 8 years, how much more money would Jaxon have in his account than Jason, to the nearest dollar?
Answer:
I attached your answer along with an explanation
Step-by-step explanation:
Please Like me follow me and Give me Crown for more help. :)
of six dvd players, two are defective and four are not. if cecil randomly chooses two of these dvd players, without replacement, the probability that the two he chooses are not defective is , what is the value of ??
The probability of selecting two non-defective DVD players from a group of six is 2/5. This is based on the assumption that the selection is done without replacement.
We can use the formula for calculating probabilities of combinations:
P(not defective) = number of ways to choose 2 non-defective DVD players / total number of ways to choose 2 DVD players
Total number of ways to choose 2 DVD players out of 6 is:
C(6,2) = 6! / ([2!] [4!]) = 15
Number of ways to choose 2 non-defective DVD players out of 4 is:
C(4,2) = 4! / ([2!] [2!]) = 6
Therefore, the probability that Cecil chooses 2 non-defective DVD players is:
P(not defective) = 6/15 = 2/5
So the value of P(not defective) is 2/5.
Learn more about probability here: brainly.com/question/30034780
#SPJ4
the best type of inspection to use is: multiple choice dependent on the nature of the purchase. 100 percent inspection. sequential sampling. continuous sampling.
The best type of inspection to use depends on the nature of the purchase. Each type of inspection has its own advantages and disadvantages, and should be chosen based on the requirements of the product and the level of risk associated with the inspection.
What are the types of purchase inspections?See more about purchase at: https://brainly.com/question/27975123
#SPJ11
please help me solve this geometry proof i’ll mark brainliest
BC will be congruent to AD under the C.P.C.T rule (corresponding parts of congruent triangles.)
What is triangle congruency?Triangle congruence: Two triangles are said to be congruent if their three corresponding sides and their three corresponding angles are of identical size.
You can move, flip, twist, and turn these triangles to produce the same effect. When relocated, they are parallel to one another.
Two triangles are congruent if they satisfy all five conditions for congruence.
They include the right angle-hypotenuse-side (RAHS), angle-side-angle (ASA), angle-angle-side (AAS), side-side-side (SSS), and angle-side-angle (SSS) (RHS).
So, in the given △DAB and △DCB:
AC = AC = Common
∠DAC = ∠BAC = AC is the angle bisector
∠DCA = ∠BCA = AC is the angle bisector
Then, △DAB ≅ △DCB under the ASA congruency rule,
Then, BC will be congruent to AD under the C.P.C.T rule (corresponding parts of congruent triangles.)
Therefore, BC will be congruent to AD under the C.P.C.T rule (corresponding parts of congruent triangles.)
Know more about triangle congruency here:
https://brainly.com/question/2938476
#SPJ1
Determine whether it is possible to find values of L 0 so that the given boundary-value problem has precisely one nontrivial solution, more than one solution, no solution, and the trivial solution. (Let k represent an arbitrary integer. If an answer does not exist, enter DNE.) y" + 16y=0, y(0)= 1, y(L) = 1 (a) precisely one nontrivial solution (b) more than one solution (c) no solution (d) the trivial solution
There is no solution if the boundary conditions are inconsistent, i.e., if y(0) ≠ y(L) = 1.
We are given the boundary-value problem:
y" + 16y = 0, y(0) = 1, y(L) = 1
The characteristic equation is r^2 + 16 = 0, which has roots r = ±4i.
The general solution to the differential equation is then y(x) = c1cos(4x) + c2sin(4x).
Using the boundary conditions, we get:
y(0) = c1 = 1
y(L) = c1cos(4L) + c2sin(4L) = 1
Substituting c1 = 1 into the second equation, we get:
cos(4L) + c2*sin(4L) = 1
Solving for c2, we get:
c2 = (1 - cos(4L))/sin(4L)
Thus, the general solution to the differential equation that satisfies the given boundary conditions is:
y(x) = cos(4x) + (1 - cos(4L))/sin(4L)*sin(4x)
Now, we can answer the questions:
(a) To have precisely one nontrivial solution, we need the coefficients c1 and c2 to be uniquely determined. From the above expression for c2, we see that this is only possible if sin(4L) is nonzero. Thus, if sin(4L) ≠ 0, there exists precisely one nontrivial solution.
(b) If sin(4L) = 0, then c2 is undefined and we have a family of solutions that differ by a constant multiple of sin(4x). Hence, there are infinitely many solutions.
(c) There is no solution if the boundary conditions are inconsistent, i.e., if y(0) ≠ y(L) = 1.
To learn more about nontrivial solution visit: https://brainly.com/question/30452276
#SPJ11
16. A savings account was worth $1250 at the end of 2010 and worth $1306 at the end of 2011. The linear model
for the worth of the account is w = 56t+1250, where t is the number of years since the end of 2010.
Find an exponential model, in the form of w= a(b)', for the worth of the savings account. Round b to the
nearest thousandth.
How much greater is the worth predicted by the exponential model than predicted by the linear model at the
end of 2020? Round to the nearest cent.
An exponential model for the worth of the savings account is [tex]W = 1250(1.045)^t[/tex]
The worth predicted by the exponential model is greater than predicted by the linear model at the end of 2020 by $131.2.
What is an exponential function?In Mathematics, an exponential function can be modeled by using the following mathematical equation:
[tex]f(x) = a(b)^x[/tex]
Where:
a represent the base value, vertical intercept, or y-intercept.b represent the slope or rate of change.x represent time.Based on the information provided about the savings account, we would determine the growth rate as follows;
[tex]W = P_{0}e^{rt}[/tex]
Growth rate, r = 1/(1 - 0)ln(1250/1306)
Growth rate, r = ln(1250/1306)
Growth rate, r = 0.0438
In the form [tex]W = a(b)^t[/tex], the required exponential function is given by;[tex]W = 1250(1.045)^t[/tex]
Years = 2020 -2010 = 10 years.
From the linear function, we have:
W = 56t + 1250
W = 56(10) + 1250
W = $1,810.
From the exponential function, we have:
[tex]W = 1250(1.045)^t\\\\W = 1250(1.045)^{10}[/tex]
W = $1,941.2
Difference = $1,941.2 - $1,810
Difference = $131.2.
Read more on exponential functions here: https://brainly.com/question/30241796
#SPJ1
Find the volume of a right circular cone that has a height of 20 ft and a base with a radius of 18 ft. Round your answer to the nearest tenth of a cubic foot
Answer:
The answer should be 20,365.714 but I am not sure
Step-by-step explanation:
1 7/8 hours every wednesday
2 3/8 hours every friday
What is total number of hours?
The total number of hours is 30 hours as the sum of 7/8 and 3/8 comes out to be 30 hours.
1) We know that there is a total of 24 hours in a day.
therefore, 7/8 hours of Wednesday =
number of hours in a day = 24
number of hours every Wednesday = 7/8
= 7/8 x 24 hours
= 7 x 3 hours
= 21 hours
7/8 hours every Wednesday means 21 hours every Wednesday.
2) We know that there are a total of 24 hours in a day;
therefore, 3/8 hours of Friday =
number of hours in a day = 24
number of hours every Friday = 3/8
= 3/8 x 24 hours
= 3 x 3 hours
= 9 hours
3/8 hours every Friday means 9 hours every Friday.
therefore, the total number of hours = 21 + 9 = 30
The total number of hours is 30 hours as the sum of 7/8 and 3/8 comes out to be 30 hours.
To learn more about sum, click here:
brainly.com/question/29034036
#SPJ4
in general, which point size would you use if you wanted each character to be approximately one inch in size? a.) 1 pt b.) 72 pts c.) 24 pts d.) 36 pts
If you want each character to be approximately one inch in size, you would use a point size of 72 pts.
Point size is a unit of measurement used to determine the size of typefaces. It represents the height of the characters in a font. One point is equal to 1/72 of an inch, which means there are 72 points in one inch.
Therefore, if you want each character to be approximately one inch in size, you would need to use a font size of 72 points. This would ensure that the characters are roughly one inch tall, assuming that the font is designed to be proportional and not condensed or expanded.
Choosing a smaller point size, such as 1 pt or 24 pts, would result in characters that are much smaller than one inch. Choosing a larger point size, such as 36 pts, would result in characters that are larger than one inch.
Therefore the correct answer is option b.) 72 pts.
To learn more about point size, refer:-
https://brainly.com/question/14052507
#SPJ4
I'm learning probability in geometry but haven't learned it for percentage. Can someone help me?
Answer:
Step-by-step explanation:
a. 100 divided by 75 = 1.3333333333333333333333333333333
1.3333333333333333333333333333333 times 43 = 57.333333333333333333333333333332
round it to the nearest whole number: ≅ 57%
If the width and length of a rectangle is 3 by 8 what is the width and length actually if the width is 10. 5
The new length of the rectangle is approximately 2.29 units. We use the formula for the area of a rectangle to solve for the new length, given the new width.
If the width and length of a rectangle are 3 and 8, respectively, and the width is increased to 10.5, we can calculate the new length of the rectangle using the formula for the area of a rectangle, which is length multiplied by width.
The original area of the rectangle is 3 x 8 = 24 square units. If we increase the width to 10.5, the new area of the rectangle becomes: 10.5 x length = 24 Solving for the length, we get: length = 24/10.5 = 2.29 (rounded to two decimal places)
It's important to note that changing one dimension of a rectangle can affect the other dimension, especially if we want to maintain the same area.
Learn more about rectangle here:
https://brainly.com/question/27722891
#SPJ4
if a random sample of size 555 is selected, what is the probability that the proportion of persons with a retirement account will differ from the population proportion by less than 5% ? round your answer to four decimal places.
The probability that the proportion of persons with a retirement account in a random sample of size 555 differs from the population proportion by less than 5% is approximately 0.8327.
We need to make some assumptions about the population proportion of persons with a retirement account and the standard deviation of the sampling distribution of sample proportions. Let's assume that the population proportion is p = 0.5 (i.e., half of the population has a retirement account) and that the standard deviation of the sampling distribution is given by:
σ = sqrt((p*(1-p))/n)
where n is the sample size.
Substituting the values given in the question, we have:
σ = sqrt((0.5*(1-0.5))/555) = 0.0258
To find the probability that the sample proportion differs from the population proportion by less than 5%, we need to find the probability that the absolute difference between the sample proportion and the population proportion is less than 0.05. This can be written as:
P(|p_hat - p| < 0.05)
where p_hat is the sample proportion.
We can standardize this expression by subtracting the population proportion from both sides and dividing by the standard deviation:
P(|p_hat - p|/σ < 0.05/σ)
P(-0.97 < Z < 0.97)
where Z is a standard normal variable. We can find this probability using a standard normal table or a calculator:
P(-0.97 < Z < 0.97) = 0.8327
Rounding to four decimal places, we have:
P(|p_hat - p| < 0.05) = 0.8327
Therefore, the probability that the proportion of persons with a retirement account in a random sample of size 555 differs from the population proportion by less than 5% is approximately 0.8327.
Learn more about probability
https://brainly.com/question/30034780
#SPJ4
an 8 foot ladder is leaning against a wall. the top of the ladder is sliding down the wall at the rate of 2 ft per second. how fast is the bottom of the ladder moving along the ground at the point in time when the botto of the ladder is 4 feet from the wall
The bottom of the ladder is moving at a rate of 4/3 ft per second.
To solve the problem, we can use the Pythagorean Theorem:[tex]$x^2 + y^2 = 64$[/tex], where x is the distance from the wall to the bottom of the ladder and y is the length of the ladder. We differentiate this equation with respect to time t and use the chain rule to get [tex]$\frac{d}{dt} (x^2 + y^2) = \frac{d}{dt} 64$[/tex]
Simplifying, we get
[tex]$2x \frac{dx}{dt} + 2y \frac{dy}{dt} = 0$[/tex]
When the bottom of the ladder is 4 feet from the wall, we have x = 4 and y = 8, so we can substitute these values into our equation and solve for [tex]$\frac{dx}{dt}$[/tex]:
[tex]$2(4)\frac{dx}{dt} + 2(8)(-2) = 0$[/tex]
[tex]$\frac{dx}{dt} = \frac{16}{8} = \frac{4}{3}$[/tex]
Therefore, the bottom of the ladder is moving at a rate of [tex]$\frac{4}{3}$[/tex] ft/s.
Learn more about Time:
https://brainly.com/question/11733843
#SPJ4