Synthesize Information If you calculate the percent composition of elements in a compound, is there enough information to determine the empirical formula for the compound? If yes, how? If no, improve the model by identifying and explaining additional information needed to identify the compound.

We have the next compounds

And we must classify them as alkane, alkene, alkyne.

We need to know that

- Alkane: They are the simplest hydrocarbons, containing only carbon and hydrogen held together by single bonds.

- Alkene: Alkenes are hydrocarbons that contain a double bond.

- Alkyne: Alkynes are hydrocarbons that contain a triple bond.

1. We can see that the structure has a double bond. So, it is an Alkene.

2. We can see that the structure has a triple bond. So, it is an Alkyne.

3. We can see that the structure has a double bond. So, it is an Alkene.

4. We can see that the structure has a triple bond. So, it is an Alkyne.

ANSWER:

1. Alkene

2. Alkyne

3. Alkene

4. Alkyne

If we consider the reaction CH₃O⁻ + H₂O ⇌ CH₃OH + OH⁻ in the forward direction, the base in the reaction is CH₃O⁻

A compound can be acidic, basic or neutral in nature. Basicity of the compound is determined when it either releases hydroxide ions, donates electrons or else accepts the protons from a compound.

In the reaction CH₃O⁻ + H₂O ⇌ CH₃OH + OH⁻:

CH₃O⁻ accepts proton or [H+] ion to become CH₃OH. Thus, CH₃O⁻ is the base in the reaction

H₂O donate [H+] ion or proton, therefore H2O change into OH-. Thus, H₂O is an acid in the reaction.

To know more about Forward reaction

https://brainly.com/question/12041327

#SPJ1

The products of the double displacement reactions are given in the equations of the reaction below:

a. 3 Sn(OH)₂ (aq) + 2 FeBr₃ (aq) ---> 3 SnBr₂ (aq) + 2 Fe(OH)₃ (s)

Iron (iii) hydroxide is obtained as a precipitate

b. CsNO₃ (aq) + KCI (aq) ---> CsCl (aq) + KNO₃ (aq)

No double displacement reaction occurs as both products are soluble.

Double displacement reactions are reactions in which there is an exchange of radicals by two compounds when solutions of the compounds are added together.

In a double displacement reaction, an insoluble precipitate is obtained since one of the products of the double displacement reaction is insoluble in aqueous solutions.

The products of the double displacement reactions are given in the equations of the reaction below:

a. Reaction between Sn(OH)₂ and FeBr₃

3 Sn(OH)₂ (aq) + 2 FeBr₃ (aq) ---> 3 SnBr₂ (aq) + 2 Fe(OH)₃ (s)

Iron (iii) hydroxide is obtained as a precipitate

b.  Reaction between CsNO₃ and KCI

CsNO₃ (aq) + KCI (aq) ---> CsCl (aq) + KNO₃ (aq)

No double displacement reaction occurs as both products are soluble.

Learn more about double displacement reactions at: https://brainly.com/question/23918356

#SPJ1

The mass of quinine in the original tonic water sample is 37.8 mg.

The concentration of the diluted sample with a fluorescence intensity of 73.7 is calculated using the formula of Lambert-Beer's law as follows:

C₁/C₂ = A₁/A₂

where:

C₁ = 25 ppm or 25 mg/L

C₂ = ?

A₁ = 195

A₂ = 73.7

C₂ = 73.7 * 25 / 195

C₂ = 9.45 mg/L

To concentration of the original sample will be determined from the dilution formula:

C₁V₁ = C₂V₂

where;

C₁ = ?

V₁ = 25. 0 mL

C₂ = 9.45 mg/L

V₂ = 200 mL

C₁ = 9.45 * 200 / 25

C₁ = 75.6 mg/L

The volume of the stock sample was 500 mL or 0.5 L

The mass of quinine = 75.6 mg/L * 0.5 L

mass of quinine = 37.8 mg

Learn more about concentration at: https://brainly.com/question/17206790

#SPJ1

A mixture in Chemistry is defined as a material made up of two or more different chemical substances, and it will not present a homogeneous solution, but instead a heterogeneous appearance, just like a vegetable soup, which is a mixture of many substances, answer letter D

Taking into account the ideal gas law, a mass of 0.00314 grams of H₂ is collected.

An ideal gas is a theoretical gas that is considered to be composed of randomly moving point particles that do not interact with each other. Gases in general are ideal when they are at high temperatures and low pressures.

The pressure, P, the temperature, T, and the volume, V, of an ideal gas, are related by a simple formula called the ideal gas law:

P×V = n×R×T

where:

In this case, you know:

Replacing in the ideal gas law:

0.985526 atm× 0.039 L = n× 0.082 (atm×L)÷(mol×K)× 298 K

Solving:

[0.985526 atm× 0.039 L]÷ [0.082 (atm×L)÷(mol×K)× 298 K]= n

0.00157 moles= n

Considering that the molar mass of H₂ is 2 g/mole, the mass can be calculated as:

mass= number of moles× molar mass

mass= 0.00157 moles× 2 g/mole

mass= 0.00314 grams

Finally, you collected a mass of 0.00314 grams.

Learn more about ideal gas law:

brainly.com/question/4147359

#SPJ1

When we have a mixture of gases, the pressure exerted by each depends on the number of moles present in the mixture, this contribution is called partial pressure. The sum of the partial pressures will be equal to the total pressure, this is called Dalton's law.

Partial pressure can be described by the following equation:

Where,

Pi is the partial pressure

Xi is the molar fraction

Pt is the total pressure

The molar fraction is calculated by the following equation:

Where,

ni is the number of moles of the substance

nT is the total number of moles.

So, we have to find first the number of moles of each gas. We are given the grams of gases, to get the equivalent moles we must divide the mass by the molar mass.

Molar Mass N2=28.0134g/mol

Molar Mass O2=31.9988g/mol

Now, the partial pressure of N2 will be:

If we assume that the gas behavior is like an ideal gas, we can find the total pressure with the following equation:

Where,

n is the total number of moles, 0.069mol

R is a constant, 0.08206atm.L/mol.K

V is the volume of the gas, 1.51L

T is the temperature of the gas, K.284.15K

We replace the known data:

Now, the partial pressure of nitrogen will be:

Answer: The partial pressure of N2 is 0.69atm

Answer:

Explanation:

Here, we want to select the possible problems with nuclear fusion

Nuclear fusion refers to a nuclear reaction wherein two or more daughter nuclei combines to give a larger nucleus

Let us look at the options one after the other to check which of them is correct

a) This is correct

The temperature accompanying nuclear reactions is millions of degrees celsius which are very high

b) This is Correct

This is the major reason why there are currently no nuclear reactors that use fusion to provide energy

c) This is wrong

They occur at very high temperatures. The nuclei need very high energy to send them into kinetic motion

d) This is correct

It is quite difficult to contain a fusion reaction due to the conditions surrounding it and that is one of the reasons why there are no commercial nuclear reactors that use fusion as an energy source

The original pressure of argon in the cylinder is 5.68 atm.

The original pressure of argon in the cylinder is calculated as follows.

Apply the concept of molar ratio or molar proportion to determine the original pressure of argon in the cylinder.

Pr = [(Pn x Vn) + (Pa x Va) ] / (Vn + Va)

where;

7.15 = [(11.08 x 4.5) + (12 x Pa)] / (4.5 + 12)

7.15(4.5 + 12) = 49.86 + 12Pa

117.98 = 49.86 + 12Pa

68.12 = 12Pa

Pa = 68.12/12

Pa = 5.68 atm

Thus, the original pressure of argon in the cylinder is determined by applying concept of molar ratio.

Learn more about original pressure of gas here: https://brainly.com/question/25736513

#SPJ1

The amount of heat, in kilojoules, that is required to melt 15 g of ice at 0 degrees Celsius and raise the temperature of the liquid to 85 degrees Celsius is 10.3178 kJ.

The process involves melting of ice at 0 degrees Celsius and then heating the resulting water to a temperature of 85 degrees Celsius.

Now, let's calculate the heat change of the process:

Heat change (ΔH) = n x heat of fusion) + mcΔt

Where n = number of moles

           m = mass = 15 g

           c = specific heat capacity of water = 4.81 J/g[tex]^oC[/tex]

           heat of fusion = 6010 J/mole

In this case, n = mass/molar mass

                       = 15/18

                       = 0.83 moles

ΔH = (0.83 x 6010) + 15 x 4.81 x (85 - 0)

      = 10317.8 Joules

But 1000 Joules = 1 kilojoules

Thus, 10317.8 joules = 10.3178 kJ

The kilojoule of heat required to melt the ice and raise the temperature of the resulting water to 85 degrees Celsius is 10.3178 kJ.

More on heat change can be found here: https://brainly.com/question/2561689

#SPJ1

Answer:

reactants /products, products / reactants, opposite / inverse

I can't exactly tell how many underscores there are.

Explanation:

This is biology, but it does contain chemistry.

The Kb for the conjugate base of HF, Fluoride ion is 1.470588 * 10^-11

The conjugate base of HF (hydrofluoric acid) is fluoride ion, F-

Ka of HF or hydrofluoric acid is given as 6.8 × 10⁻⁴

Kw = Ka * Kb

Where,

Kb = Base dissociation constant

Kw = Water dissociation constant or equilibrium constant

Ka = Acid dissociation constant

Kw = [H+] [OH-] = 1.0 X 10-14 at room temperature

The formula can be rewritten as,

Kb = (Kw / Ka)

     = (10^-14) / (6.8 * 10^-4)

     = 1.470588 * 10^-11

Therefore, the kb for the conjugate base of HF, Fluoride ion is 1.470588 * 10^-11

To know more about Conjugate base

https://brainly.com/question/13872450

#SPJ1

Answer:

Explanation:

the answer is D

Answer:

D

Explanation:

capillaries veins and arteries

They give us the grams of solute and the molarity of the solution. To find the liters we must take into account the definition of molarity. Molarity is defined as:

The definition of molarity asks us for the moles of solute, so we must pass the grams that give us to moles. For them, we divide the 500 grams by the molar mass of MgF2. The molar mass of MgF2 is 62.3018g/mol.

The moles of MgF2 will be:

Now, we find the liters of solution:

Answer: It must be present 3L of solution

CO2 particles move faster through the solution. Gas solubility increases as liquid CO2 partial pressure rises.

Dynamic equilibrium occurs when the solution rate matches the escape rate, and neither the gas above the liquid nor the gas dissolved in it changes.

This is further explained below.

Generally, The idea of partial pressure is connected to the changes that occur in soft drink containers. Since there are no gas particles in the liquid when we add CO2 at a typical partial pressure of 0.00035, the CO2 gas begins to move into the solution at a faster pace than it can leave.

But when the concentration of CO2 gas rises, it begins to diffuse into the liquid, and eventually, a dynamic equilibrium is attained when the rate of the solution equals the rate of escape.

However, as we continue to add CO2 to this dynamic equilibrium, its partial pressure will rise until it reaches 4 atm, and this rise in partial pressure accelerates the rate of solution. Thus, raising the partial pressure of CO2 causes this reversible transformation to occur.

When the rate of the solution equals the rate of escape, this is known as dynamic equilibrium, and neither the quantity of gas above the liquid nor the amount of gas dissolved in it changes in any significant way.

Now here comes what role is played by partial pressure. When the rate of solution and the rate of escape reach a dynamic equilibrium and we begin to introduce additional CO2 gas to this dynamic equilibrium stage.

The CO2 gas particle's partial pressure and concentration both rise. Because of the increased rate of collision between the surface of CO2 gas and the surface of the liquid particles due to the increasing concentration, the rate of solution also rises. The pace of solution has now surpassed the rate of escape.

As a result, the rate at which CO2 gas particles travel through the solution increases. This is how a rise in CO2 partial pressure over liquid causes a rise in gas solubility.

Read more about CO2 partial pressure

https://brainly.com/question/15121846

#SPJ1

The electron configurations that are not valid among the options are 1s²2s²2p 3s 3p 4s²4d¹04p5 and 1s²2s²2p 3s³3d5. Options 1 and 2.

The electron configuration of atoms using the various orbital levels follows the order: 1s, 2s, 2p, 3s, 3p, 4s, 3d, 4p, 5s, 4d, 5p, 6s, 4f, 5d, 6p, 7s, 5f, 6d, 7p.

Also, according to Afbau principle, orbitals with low energy levels are filled with electrons before orbitals with higher energy levels.

Using the above,  1s²2s²2p 3s 3p 4s²4d¹04p5 is incorrect for some reasons:

1s²2s²2p 3s³3d5 is incorrect because:

The remaining electron configurations are correct with correctly placed electrons in the various orbitals.

More on electron configurations can be found here: https://brainly.com/question/14283892

#SPJ1

Answer: 189.5g of Ag would be produced from 0.88 moles of Ag2S

Explanation:

The question requires us the amount of Ag, in grams, that would be produced from 0.88 moles of Ag2S, according to the following equation:

To solve this problem, which is a mol to mass stoichiometry problem, we'll need to follow the steps:

moles of Ag2S → moles of Ag → mass of Ag

To do that, we'll need to use the molar mass of Ag (107.87 g/mol) and the mole ratio between Ag2S and Ag, as given by the balanced chemical equation (6 moles of Ag are produced from 3 moles of Ag2S).

We can calculate the number of moles of Ag that would be produced from 0.88 moles of Ag2S as:

3 mol Ag2S -------------------------- 6 mol Ag

0.88 mol Ag2S --------------------- x

Solving for x, we'll have:

Therefore, 1.76 moles of Ag would be produced from 0.88 moles of Ag2S.

Next, we need to convert the number of moles of Ag calculated to its correspondent mass. Knowing that the molar mass of Ag is 107.87 g/mol, we can calculate:

Therefore, 189.5g of Ag would be produced from 0.88 moles of Ag2S.

The energy from the sun heats up the water in the tank by convection and radiation.

We know that heat is that which is able to effect a temperature change in an object. Now, we know that there are three forms of heat transfer and these are;

1) Conduction

2) Convection

3) Radiation

Now, we know that radiation is the movement of heat without a medium of propagation. Heat from the sun reaches the tank by radiation. The molecules that are at the surface are first heated up and sink down while the heavier particles below move up. This is called convection.

Learn more about radiation:https://brainly.com/question/13934832

#SPJ1

The balanced equation

2H2 +O2 =====> 2H2O

What is balanced equation ?

An equation for a chemical reaction is said to be balanced if both the reactants and the products have the same number of atoms and total charge for each component of the reaction. In other words, both sides of the reaction have an equal balance of mass and charge.

The balanced equation

2H2 +O2 =====> 2H2O

To know more about balanced equation from the given link

https://brainly.com/question/11904811

#SPJ13

We must take into account the definition of pH, and this represents the concentration of H+ ions([H+]). It can be defined with the following equation:

To determine how many times the acid is stronger than the tomato, we must calculate the concentration of H+ ions for each pH value, to do so we clear [H+] from the previous equation:

Now we substitute each pH value into the equation:

Therefore we will have to:

Therefore, stomach acid will be 1000 times stronger than the tomatoes.

The electron releases energy in the form of light.

Hope this helps!

The relationship between n, ℓ, and the total number of nodes is given by the expression; Number of spherical nodes = n - ℓ - 1.

The number of nodes has to do with the points on the orbital where there is a zero electron density. It is the points along the orbital where there re no electrons. Recall that the orbitals are the regions in space where there is a high probability of finding an electron.

There are various orbitals and the number of nodes of each of the orbitals does vary. The s orbital has no nodes while the p orbital is known to have one node.

Learn more about orbital nodes:https://brainly.com/question/28100168

#SPJ1

According to the explanation given in a previous session, the compounds that comes after the arrow are classified as product, and the compounds that comes before are classified as reactant, therefore in this reaction, (NH4)2CO3 is the product of the reaction, letter D

We work here with Charles' Law. The equation used here is:

V1/T1 = V2/T2 (1)

(pressure and amount constant)

V is for volume and T for temperature

V1 = 1785 mL

1 L = 1000 mL ==> V1 = 1.785 L

T1 = 25 °C = 25 °C + 273 = 298 K

V2 = 1.25 L

T2 = unknown

From (1) we clear T2:

T2 = V2 x T1/V1 = 1.25 L x 298 K/1.785 L = 209 K approx.

T2 = 209 K - 273 = -64 °C

Answer: T2 = -64 °C

The IUPAC name of the structure (9) is 4-ethyl-2,3-dimethyl-heptane.

The first step is to select the longest, most substituted carbon chain containing a functional group is chosen. Then the identification of the primary suffix indicates the degree of saturation such as 'ane' or 'ene.

Then the identification of the secondary suffix indicates the functional group present in the molecule which depends on the number of occurrences of the same functional group such as di. tri tetra etc. Carbon atoms in the carbon chain are numbered from the reactive end of the molecule where the functional group is present.

In the given structure the longest carbon chain of seven carbon atoms. The methyl groups are present at the second and third position and the ethyl group is present at the fourth position. All the bonds in the structure are single bonds so the suffix is 'ane'. Therefore, the IUPAC name is 4-ethyl-2,3-dimethyl-heptane.

Learn more about IUPAC nomenclature, here:

https://brainly.com/question/2599286

#SPJ1

Answer

0.9166 g CO

Procedure

Considering the conditions and parameters given ideal gas law will be assumed.

The gas constant is 8.3144 L⋅kPa⋅ K⁻¹⋅mol⁻¹

Converting the current data to the required units

710 mL = 0.710 L

37 °C = 310.15 °K

Solving for moles and substituting the variables with the available data

Transforming from moles to grams using the molecular weight

Answer:

Explanation:The given reaction is

It is an example of an oxidation reaction because in the above reaction, is getting oxidized to form .

Also, it is a type of combination reaction because magnesium reacts with oxygen to form a single product i.e. Magnesium oxide.

The fact that some of the solid was transferred would decrease the mass of the limiting reactant.

We know that in a chemical reaction, there are at least two substances that are combined in order to give the product of the reaction. We also know that the product that we obtain must be in accordance to the stoichiometry of the reaction.

It is common to see that one of the reactants would be present in a very large amount while the other reactant would be present only in quite a small amount. The reactant that is present in a small amount is said to be the limiting reactant while the one that is present in the large amount is said to be the reactant that is in excess.

Having said this, we know that the mass of the limiting reactant can be obtained from the mass of the solid that is obtained after the reaction.

If we do not take out all of the solid from the centrifuge, the mass would not be accurately weighed and the mass of the limiting reactant would not be accurately determined.

Learn more about mass of the product:https://brainly.com/question/19694949

#SPJ1

The bulk properties of a substance (macroscopic) such as electrical conductivity can be caused by the microscopic such as electrical forces in the atoms through the movement of free electrons.

This is referred to as the measure or the degree in which a substance conducts electricity and how the electric current moves within a substance.

The electrical conductivity which is macroscopic can be caused by the microscopic such as electrical forces as a result of the electrons moving in the body. The movement of the electron is usually from the negative to the positive terminal of the body.

Read more about Conductivity here https://brainly.com/question/24943129

#SPJ1