The area behind an island arc that forms a contagious center is the back arc basin. Thus, option A is correct.
The Back-arc basin is a submarine bay that includes an island arc. Such basins are commonly located along the western margin of the Pacific Ocean near the intersection of two tectonic containers.
When an aquatic plate subducts underneath a continental scale, it can complete an island arc on the continental scale side and a groove on the aquatic plate side. As the subducting plate resumes to sink, it can produce pressure in the overlying vessel, forcing it to break and form a contagious headquarters.
To learn more about Island Arc
https://brainly.com/question/31100267
#SPJ4
The rubbing of the North American Plate against the Pacific Plate causes ____________________ along the Pacific Coast of North America.
The Rocky Mountians
Earthquakes
Melted Glaciers
The rubbing of the North American Plate against the Pacific Plate causes earthquakes along the Pacific Coast of North America.
The North American Plate and the Pacific Plate are two tectonic plates that meet at a boundary called the Pacific Plate Boundary. This boundary extends along the western coast of North America, from Alaska down to California. The two plates are moving in different directions, with the Pacific Plate moving northwest and the North American Plate moving southwest. As a result, the North American Plate is being pushed against the Pacific Plate, causing a buildup of stress and tension at the boundary. Eventually, this stress is released in the form of earthquakes, as the plates suddenly slip past each other. The Pacific Coast of North America is particularly vulnerable to earthquakes because it lies along this plate boundary, and the region has experienced some of the most significant earthquakes in history, such as the 1906 San Francisco earthquake and the 1964 Alaska earthquake. Earthquakes along the Pacific Coast can be very destructive, causing damage to buildings and infrastructure, and posing a significant threat to human safety.
Learn more about tectonic plates:
https://brainly.com/question/19317822
#SPJ11
The rubbing of the North American Plate against the Pacific Plate causes Earthquakes along the Pacific Coast of North America.
The rubbing of the North American Plate against the Pacific Plate is a result of plate tectonics, and it is responsible for causing a number of geologic events along the Pacific Coast of North America. The most notable of these events are earthquakes, which are the result of the two plates grinding against each other.
This movement also causes the melting of glaciers, as the friction creates heat which melts the ice. The strain of the plates pushing against each other is also responsible for the formation of the Rocky Mountains, which are caused by the uplift of the plates. This same force can also cause volcanoes to form, as molten rock is forced up from the mantle. In all, the rubbing of the two plates has had a major effect on the geology of the region, and it continues to shape the landscape even today.
Know more about Plate tectonics here
https://brainly.com/question/19317822#
#SPJ11
The line of latitude 30° N runs through
.
The Chinese city of Hong Kong is located between the
lines of longitude.
What two countries extend north of 45° N latitude?
Which two countries are located east of the 105° E line of longitude?
North Africa, the Middle East, and the United States are all located along the 30° N line.Between the longitudes 113° and 114° East is where the Chinese city of Hong Kong is situated.North of 45° N latitude are Canada and Russia.
What latitude divides the continents of Africa and the United States?A circle of latitude located 30 degrees north of the equatorial plane of the Earth is known as the 30th parallel north. It traverses Africa, Asia, the Pacific Ocean, North America, and the Atlantic Ocean while standing one-third of the way between the equator and the North Pole.
What is the longitude line of 30 degrees?A line of longitude that crosses the Arctic Ocean from the North Pole to 30 degrees east of Greenwich, Europe, Turkey, Africa, the Indian Ocean, the Southern Ocean, and Antarctica to the South Pole.
To know more about longitudes visit:-
https://brainly.com/question/13492273
#SPJ1
Double-click the Drainage Pattern A placemark. Which type of drainage pattern is this?
Choose matching definition
deranged drainage
radial drainage
trellis drainage
parallel drainage
Radial drainage is a type of drainage pattern in which streams flow outward from a central point. It is created when water flows away from a single peak or dome and forms a pattern of streams that radiate outward like spokes on a wheel.
This type of drainage pattern is commonly found in areas of flat terrain, such as a volcanic plateau or a broad, low-lying plain. The drainage pattern is formed when water flows over the surface in a radial pattern, and the streams that form the pattern flow in a straight line away from the peak or dome.
In some instances, the streams will also spread out and divide as they move away from the central point. The streams that form a radial drainage pattern typically have short, steep slopes and wide flood plains, and the streams are usually separated by a large distance. The radial drainage pattern is found in many parts of the world, including the United States, Africa, and Australia.
Know more about Radial drainage here
https://brainly.com/question/31080793#
#SPJ11
A drainage pattern is the arrangement or configuration of the interconnected network of channels that form a river or stream system.
The four types of drainage patterns mentioned in your question are:
1. Deranged drainage: This type of drainage pattern occurs when there is no coherent pattern to the flow of water, and streams flow in random directions.
2. Radial drainage: This type of drainage pattern occurs when streams flow outward from a central high point, like spokes on a wheel.
3. Trellis drainage: This type of drainage pattern occurs when streams flow parallel to each other in a valley or ridgeline, with smaller tributaries flowing perpendicularly into them.
4. Parallel drainage: This type of drainage pattern occurs when streams flow parallel to each other, often along a steep slope or gradient.
Without further information, it's impossible for me to tell you which type of drainage pattern the Drainage Pattern A placemark represents. I suggest looking at the map or legend associated with the placemark to find out more information.
Learn more about map :
https://brainly.com/question/1565784
#SPJ11
mount st. helens, in southwestern washington state, is an active volcano because group of answer choices an oceanic plate is subducting beneath the north american continent. a continental plate is colliding with the north american continent. a continental plate is sliding past the north american continent. a transform fault runs beneath it a triple junction migrated past it
Mount St. Helens, located in southwestern Washington state, is an active volcano because a continental plate is colliding with the North American continent. This collision causes the buildup of pressure and magma within the volcano. This area is part of the Pacific Ring of Fire, which is known for its high concentration of volcanic and seismic activity due to the subduction of oceanic plates beneath continental plates. So, although an oceanic plate is involved in the broader context of the American continent's geological activity, it is not the direct cause of Mount St. Helens' volcanic activity.
The Mount St. Helens major eruption of May 18, 1980 remains the deadliest and most economically destructive volcanic event in U.S. history. Fifty-seven people were killed; 200 homes, 47 bridges, 15 miles (24 km) of railways, and 185 miles (298 km) of highway were destroyed.[5] A massive debris avalanche, triggered by a magnitude 5.1 earthquake, caused a lateral eruption[6] that reduced the elevation of the mountain's summit from 9,677 ft (2,950 m) to 8,363 ft (2,549 m), leaving a 1 mile (1.6 km) wide horseshoe-shaped crater. The debris avalanche was 0.6 cubic miles (2.5 km3) in volume. The 1980 eruption disrupted terrestrial ecosystems near the volcano. By contrast, aquatic ecosystems in the area greatly benefited from the amounts of ash, allowing life to multiply rapidly. Six years after the eruption, most lakes in the area had returned to their normal state.
Learn more about American continent here:
https://brainly.com/question/28431674
#SPJ11
differentiate between the dip slope of of a homoclinal ridge and cuesta
The scarp slope maintains a high slope through undermining and mass wasting as a result of fast weathering of a less resistant layer below, while the dip slope is at or less than the angle of dip of the beds.
What is the dip slope of a Homoclinal ridge?
Cuestas, where the strata very gently descend from 10 to 25 degrees Homoclinal ridges dip at an angle greater than 45°, such as the Hogsback north of Alice in the Eastern Cape, where the dip slope is quite high. Homoclinal ridges dip between 25° and 45°, for example the Magaliesberg hogsback ridges.
In homoclinal ridge classification, the angle of the dip slope is used. a ridge that has a sharp scarp slope and a mild dip slope. The dip slope has a 10o to 25o inclination to the horizontal. The dip slope is typically utilised for forestry and has good soil.
The dip slope is 10 to 25 degrees from horizontal. Cuesta basins and cuesta domes are both products of folding.
learn more about Homoclinal ridge:
https://brainly.com/question/13100936
#SPJ9
gusty and sudden wind eddies are likely to form at bends in a canyon. true or false
Answer:
true
Explanation:
which of the following activities can contribute to an increase in the carbon dioxide in the earth's atmosphere? i. the burning of fossil fuels ii. volcanic activity iii. condensation
Answer: I & II
Explanation: Burning fossil fuels such as coal can most definitely release CO2. For example, when one burns a fire, black smoke is released. Along with this, large volcanic eruptions can also eject millions of tons of CO2 into the atmosphere.
the yellowstone supervolcano would produce massive amounts of ash. why would ash fall be such a problem?
Ash fall from the Yellowstone supervolcano would be a major problem for several reasons. First, the sheer volume of ash could cause widespread respiratory issues and reduced visibility. Second, the ash could contaminate water sources, affecting agriculture and wildlife.
Yellowstone National Park is an American national park located in the western United States, largely in the northwest corner of Wyoming and extending into Montana and Idaho. It was established by the 42nd U.S. Congress with the Yellowstone National Park Protection Act and signed into law by President Ulysses S. Grant on March 1, 1872. Yellowstone was the first national park in the U.S. and is also widely held to be the first national park in the world. The park is known for its wildlife and its many geothermal features, especially the Old Faithful geyser, one of its most popular. While it represents many types of biomes, the subalpine forest is the most abundant. It is part of the South Central Rockies forests ecoregion. While Native Americans have lived in the Yellowstone region for at least 11,000 years, aside from visits by mountain men during the early-to-mid-19th century, organized exploration did not begin until the late 1860s.
Learn more about Yellowstone here:
https://brainly.com/question/5599231
#SPJ11
where would a volcano least likely occur? mid-ocean ridge convergent plate boundary transform plate boundary hot spot above a mantle plume
A volcano would least likely occur at a transform plate boundary because the movement of the plates there is horizontal and not conducive to magma rising to the surface.
Transform plate boundaries occur where two tectonic plates slide past each other, with no significant vertical movement. As a result, there is typically no significant magma generation or volcanic activity at these boundaries. Instead, transform plate boundaries are characterized by seismic activity, as the movement of the plates can cause earthquakes. Volcanoes are more likely to occur at other types of plate boundaries, such as divergent plate boundaries (where two plates are moving apart) and convergent plate boundaries (where two plates are moving towards each other). At divergent plate boundaries, magma rises up from the mantle to fill the gap created by the moving plates, leading to volcanic activity such as mid-ocean ridge volcanism. At convergent plate boundaries, one plate is typically forced under the other (subduction), which can also lead to magma generation and volcanic activity.
Learn more about tectonic plates :
https://brainly.com/question/19317822
#SPJ11
the mega-boulder that destroyed this house is an example of a(n) blank event. multiple choice question.
The mega-boulder that destroyed this house is an example of a natural disaster.
The correct option is A.
Natural disasters are events caused by natural hazards that drastically affect people and their environment. The mega-boulder that destroyed this house is an example of a natural disaster, as it is a result of a landslide or other type of natural event.
Natural disasters can be caused by a variety of factors, including earthquakes, floods, hurricanes, tornadoes, and other extreme weather events. They often result in destruction of property and loss of life, and can have a significant economic, social, and environmental impact. Natural disasters are unpredictable and often devastating, and it is important to be prepared for them.
The correct option is A.
To know more about natural disaster, click here:
https://brainly.com/question/13154257
#SPJ4
The complete Question -
The mega-boulder that destroyed this house is an example of a(n) blank event.
A) Natural Disaster
B) human intervention
C) Planned destruction
D) None of the above
oint sources of water pollution discharge pollutants at specific locations through drain pipes, ditches, or sewer lines into bodies of surface water. because point sources are located at specific places, they are fairly easy to identify, monitor, and regulate. nonpoint sources of water pollution are broad, diffuse areas, rather than points, from which pollutants enter bodies of surface water or air. difficult and expensive to identify and control discharges from many diffuse sources. group of answer choices true
\ statement about point sources and nonpoint sources of water pollution is true.
Your statement: Point sources of water pollution discharge pollutants at specific locations through drain pipes, ditches, or sewer lines into bodies of surface water. They are easy to identify, monitor, and regulate. Nonpoint sources of water pollution are broad, diffuse areas, from which pollutants enter bodies of surface water or air, and they are difficult and expensive to identify and control.
My answer: Yes, the statement is true. Point sources are specific, identifiable sources of water pollution, making them easier to monitor and regulate, while nonpoint sources are diffuse and harder to identify and control due to their broad nature.
Learn more about discharge here:
https://brainly.com/question/28497082
#SPJ11
when ice forms from seawater, the remaining seawater will have a: question 9 options: darker color. decreased density. higher salinity. higher temperature. lower temperature.
When ice forms from seawater, the remaining seawater will have a higher salinity. So, the correct answer is higher salinity. This is because as the ice forms, it excludes the salt ions, leaving behind a more concentrated solution of seawater.
The process of freezing seawater actually causes the salt ions to become more concentrated in the remaining liquid, which means that the salinity of the seawater will increase. This process is known as "brine rejection." In addition to the increased salinity, the temperature of the remaining seawater may also decrease. This is because the process of freezing requires energy, and that energy is taken from the surrounding seawater. As a result, the seawater in the immediate vicinity of the ice may become slightly cooler.
However, this temperature change is typically only temporary and localized, as the ocean is a large body of water with a high heat capacity. It's worth noting that the color of the seawater is unlikely to change significantly as a result of ice formation. However, in areas where the ice cover is thick enough to block sunlight from penetrating the water, the seawater beneath the ice may appear darker due to reduced light levels. Overall, the primary impact of ice formation on seawater is an increase in salinity. So, the correct answer is higher salinity.
For more such questions on seawater
https://brainly.com/question/27362715
#SPJ11
When ice forms from seawater, the remaining seawater will have a higher salinity.When seawater freezes, the salt and other dissolved minerals in the water are excluded from the forming ice crystals,
resulting in a higher concentration of salt in the remaining seawater. As a result, the remaining seawater becomes denser, with a higher salinity and a lower temperature.This process is important for the ocean's thermohaline circulation, which is driven by differences in temperature and salinity. The denser, saltier water sinks and flows towards the poles, while the less dense, fresher water moves towards the equator. This movement helps to redistribute heat around the globe, playing a key role in regulating the Earth's climate.In terms of color, the remaining seawater may appear darker due to the absence of ice, which reflects sunlight and makes the surface appear brighter. The remaining seawater may also have a slightly lower temperature due to the loss of heat during the freezing process, but this will depend on various factors such as the initial temperature of the seawater and the ambient air temperature.
learn more about salt here:https://brainly.com/question/30105881
#SPJ11
short extensions of rock or other material that are placed at right angles to longshore drift to stop the longshore transport of sediments are called .
Short extensions of rock or other material that are placed at right angles to longshore drift to stop the longshore transport of sediments are called groin.
A groin is a long, thin structure used in coastal engineering that extends into the water from a beach to stop beach erosion or to catch and store sand which might otherwise flow along the beach face and shoreline area as a result of waves that are coming at an angle.
On the updrift side, a groin can successfully stabilise a beach, but on the downdrift side, where the groin construction prevents drifting sand from replenishing the beach, erosion is more likely to worsen. Several groin are frequently constructed in so-called groin fields, which can stabilise a broader beach area, in part to combat this tendency.
Know more about groin here
https://brainly.com/question/13709039
#SPJ4
according to earth science reference tables which radioactive element formed at the time of its origin has
According to Earth Science Reference Tables, the radioactive element that formed at the time of Earth's origin and is often used for dating purposes is Uranium-238.
Uranium-238 decays into Lead-206, and this decay process is used to determine the age of rocks and minerals through radiometric dating techniques. The radioactive element that formed at the time of the Earth's origin and is commonly used for dating geological materials is actually Uranium-235 (U-235). U-235 is a naturally occurring isotope of uranium, and it is unstable, which means it undergoes radioactive decay over time. When a rock or mineral containing U-235 forms, the clock starts ticking, and the U-235 begins to decay into other elements at a known rate. By measuring the ratio of U-235 to its decay products, scientists can determine the age of the rock or mineral. This technique is known as radiometric dating and is widely used in geology and other fields to determine the age of rocks, fossils, and other geological materials.
Learn more about geological materials :
https://brainly.com/question/29571249
#SPJ11
According to Earth Science Reference Tables, the radioactive element that formed at the time of its origin has the longest half-life is Uranium-238.
Uranium-238, with a half-life of approximately 4.5 billion years, is commonly used to determine the age of Earth and various geological formations. This long half-life allows scientists to study Earth's geological history and make estimates about the age of rocks and minerals.
By comparing the ratio of Uranium-238 to its decay product, Lead-206, scientists can determine how long it has been since the rock was last heated or otherwise altered, which provides valuable information about Earth's formation and the processes that have shaped it over time.
This method, known as radiometric dating, is a powerful tool for understanding the age and development of our planet.
The use of Earth Science Reference Tables, which contain information about the half-lives of various radioactive elements, enables researchers to accurately measure and interpret these ratios to draw conclusions about Earth's history.
In summary, according to Earth Science Reference Tables, Uranium-238 is the radioactive element formed at the time of Earth's origin with the longest half-life, allowing scientists to study geological processes and the age of our planet.
To know more about radioactive refer here
brainly.com/question/1770619 #
#SPJ11
if you examine the information in the pop-up window for each of these cities, what is different about the cities that could explain difference in average temperature?
The information in the pop-up window for each of these cities may reveal various factors that could explain the difference in average temperature.
For instance, factors such as latitude, altitude, proximity to water bodies, prevailing winds, urbanization, and vegetation cover can all impact the temperature of a city. Therefore, it is essential to examine these variables to understand why some cities may be hotter or cooler than others. By analyzing the information, we may find that cities located near the equator tend to be hotter due to their proximity to the sun's rays, while cities situated at higher altitudes experience cooler temperatures due to the decrease in air pressure. Similarly, cities situated near large water bodies may experience milder temperatures due to the moderating effect of the water, while cities with extensive urbanization and little vegetation cover may experience the urban heat island effect, resulting in higher temperatures.
Learn more about water bodies here https://brainly.com/question/30331315
#SPJ11
Scientists propose an early period of heavy bombardment in the Solar System because a. the Moon is heavily cratered. b. all the craters on the Moon are old. c. the smooth part of the Moon is nearly as old as the heavily cratered part. d. all the craters on the Moon are young.
Scientists propose an early period of heavy bombardment in the Solar System because the Moon is heavily cratered.
A is the correct answer.
Failed planets and smaller asteroids crashed into larger worlds between 4.5 and 3.8 billion years ago, leaving scars on their surfaces. Impacts in the solar system may have increased near the end of the conflict, during a time known as the Late Heavy Bombardment.
The large planets were responsible for the Late Heavy Bombardment because as they moved about, circling closer and further from the sun, they pushed many asteroids and other smaller solar system objects with them.
Strong evidence for a period of intense bombardment can be found in the age distribution of meteors observed on Earth, major impacts on the terrestrial planets and our Moon, clues to shock impacts in the asteroid belt, and other factors.
To know more about bombardment visit:
https://brainly.com/question/10317409
#SPJ4
Scientists propose an early period of heavy bombardment in the Solar System because the Moon is heavily cratered. So, the correct option is A. the Moon is heavily cratered.
The Moon has a lot of impact craters that indicate it has been hit by a lot of objects in the past. The craters on the Moon are not all the same age. Some are older than others. However, they all indicate that there was a time when the Moon was bombarded by a lot of objects. The smooth part of the Moon is nearly as old as the heavily cratered part, which suggests that the bombardment occurred early in the Moon's history.
The early period of heavy bombardment in the Solar System is thought to have happened about 4 billion years ago. During this time, the inner Solar System was full of debris left over from the formation of the planets. This debris included asteroids, comets, and other objects. These objects collided with the Moon and other planets in the inner Solar System, causing a lot of damage. The heavy bombardment period was not limited to the Moon.
Other objects in the inner Solar System also show evidence of being hit by a lot of objects during this time. The early period of heavy bombardment was a key event in the history of the Solar System. It is thought to have played a role in shaping the planets and their moons, and may have even played a role in the origin of life on Earth. So, the correct option is A. the Moon is heavily cratered.
For more such questions on Solar System
https://brainly.com/question/7953310
#SPJ11
(q003) porosity decreases group of answer choices as sedimentary rock weathers. with decreasing compaction of sediments or rock. when rocks develop joints or faults. with the cementing of sediments by mineral grains from groundwater.
Porosity decreases with the cementing of sediments by mineral grains from groundwater. This process reduces the spaces between sediment particles, leading to lower porosity in the sedimentary rock.
Porosity is a measure of how much empty space there is within a rock or sediment. As sedimentary rock weathers, its porosity typically decreases. This can happen for several reasons. One reason is the decreasing compaction of sediments or rock. Over time, the weight of overlying sediment or rock can compress the sediments beneath it, reducing the amount of empty space within the rock. Another reason is when rocks develop joints or faults. These cracks in the rock can allow water to flow through and carry away small particles, reducing the porosity. Finally, porosity can decrease with the cementing of sediments by mineral grains from groundwater. As mineral grains precipitate out of the groundwater, they fill in the empty spaces between sediment particles, reducing porosity.
Learn more about rock here:
https://brainly.com/question/19930528
#SPJ11
Porosity decreases with the cementing of sediments by mineral grains from groundwater. As the minerals cement the sediment particles together, the spaces between the particles are reduced, leading to a decrease in porosity. This process is known as cementation and is a common process in the formation of sedimentary rocks.
Porosity decreases with the cementing of sediments by mineral grains from groundwater. This process reduces the spaces between sediment particles, resulting in a decrease in porosity.The porosity of sedimentary rock refers to the volume of open spaces or voids within the rock that can hold fluids such as water, oil, or gas. As sedimentary rock weathers, its porosity can decrease due to a number of factors. One of the main reasons for decreased porosity is the compaction of sediments or rock over time, which reduces the amount of open space between grains. This can occur through natural processes such as the weight of overlying sediment or from tectonic forces. Another reason for decreased porosity is the cementing of sediments by mineral grains from groundwater. As water flows through sedimentary rock, it can deposit minerals such as quartz, calcite, or iron oxide that bind sediment grains together and reduce the volume of open space. Additionally, when rocks develop joints or faults, they can undergo physical deformation that decreases the porosity by reducing the volume of open space.Overall, the decrease in porosity of sedimentary rock can have important implications for the movement of fluids through rock, including groundwater, oil, and gas. Understanding the factors that affect porosity is therefore essential for many fields, including geology, hydrology, and resource exploration.
To learn more about cementing click on the link below:
brainly.com/question/15286339
#SPJ11
the buildup of excess salts in irrigated soils can result in increased ph if the salts are high in sodium bicarbonate.A. TrueB. False
The coating of excess salts in irrigated soils can result in raised ph if the salts are increased in sodium bicarbonate. This statement is False.
The buildup of extra salts in irrigated soils can result in grown pH if the salts are high in sodium carbonate. High levels of sodium carbonate can direct to an expansion in soil pH, a state known as soil alkalization. The high groups of sodium bicarbonate can guide a decline in soil pH, a state known as soil acidification.
The pH values in the topsoil are lower because topsoil is high in organic significance and the decay of organic weight will direct to the display of more organic acids, thus reducing the pH of topsoil.
To learn more about sodium bicarbonate
https://brainly.com/question/1904767
#SPJ4
compare mountainous areas to the natural vegetation types found in the same areas. What vegetation is commonly found in the mountains? What vegetation is more commonly found in flat, low-lying areas?
The mountains' higher elevations (heights) are home to mountain flora. According to changes and elevational increases, this type of flora varies. The temperature drops as you get higher.
Coniferous woods are made up of these conical trees that grow at higher elevations. Chir, deodar, and pine are a few common types of trees.
2. What vegetation is commonly found in the mountains?Pines (Pinus), firs (Abies), spruces (Picea), and the deciduous larches (Larix) are common conifers found in mountainous locations.
Broad-leaved deciduous trees may be found in some regions, and below them, particularly in moister areas, you can find a variety of lesser plants.
These are types usually found in mountainous areas.
3. What vegetation is more commonly found in flat, low-lying areas?As the name implies, grasslands are wide, flat landscapes with a predominance of grasses as flora. Every continent except Antarctica has grasslands.
Tough vegetation that flourishes all year, like oats, dominates meadows in chilly, moderate areas like northwest Europe. Some of these grasses are so resilient and tenacious that people classify them as weeds.
Hence, Grasslands are commonly found in flat, low-lying areas.
To know more about Natural Vegetation visit:
https://brainly.com/question/26982038
#SPJ1
Help need this asap fast
The answers are given as follows:
Environmental concerns can decrease demand for coal because there is a growing awareness of the negative impact of burning fossil fuels on the environment.
As a result, industries and individuals are seeking alternative sources of energy that are more sustainable and eco-friendly.
On the other hand, agricultural output tends to increase demand for coal as it is often used to power machinery and equipment for farming and harvesting crops. The demand for coal as a power source in agriculture can increase as the need for food production grows, especially in developing countries where agriculture is a vital industry.
Learn more about coal at:
https://brainly.com/question/30560160
#SPJ1
the hottest stars show little evidence of hydrogen in their spectra because hydrogen is mostly ionized in the stars temperatures. true or false
True, the hottest stars show little evidence of hydrogen in their spectra because hydrogen is mostly ionized at the high temperatures found in these stars.
The hottest stars, also known as O-type stars, show little evidence of hydrogen in their spectra because hydrogen is mostly ionized at the high temperatures found in these stars. O-type stars have surface temperatures of around 30,000 kelvin, which is hot enough to ionize hydrogen atoms and strip them of their electrons. As a result, the spectral lines that are normally associated with neutral hydrogen atoms, such as the Balmer series, are very weak or even absent in the spectra of O-type stars. Instead, these stars show strong spectral lines associated with ionized elements, such as helium, nitrogen, oxygen, and silicon, which are produced by the high temperatures and intense radiation fields found in these stars.
Learn more about O-type stars :
https://brainly.com/question/10429151
#SPJ11
The correct answers for the statement ''the hottest stars show little evidence of hydrogen in their spectra because hydrogen is mostly ionized in the stars temperatures'' is True.
The hottest stars have such high temperatures that the majority of the hydrogen atoms in their atmospheres are ionized, meaning they have lost their electrons. When this happens, the hydrogen atoms no longer absorb or emit light at the same wavelengths as neutral hydrogen atoms.
As a result, there is little evidence of hydrogen in the spectra of these stars. Instead, other elements that are present in the stars, such as helium and carbon, produce the dominant spectral lines. This is why the spectra of hot stars look very different from those of cooler stars, which have more neutral hydrogen in their atmospheres.
To know more hydrogen,refer to the link:
https://brainly.com/question/28937951#
#SPJ11
creates a zone of still water near the coastline is called?
The zone of still water near the coastline is called a "littoral zone". It is created by the interaction between waves and the seabed, as well as other factors such as tides and currents.
A littoral cell is a section of coastline that is relatively self-contained, with a balance between the amount of sand added to the beach (by rivers or offshore currents) and the amount of sand removed from the beach (by waves and longshore currents). As waves approach the shore, they cause water to pile up in a zone of still water, which can help to protect the beach from erosion and provide a calm area for swimming and recreation. The littoral cell is an important concept in coastal management, as it helps to define the boundaries of coastal ecosystems and inform decisions about beach nourishment, erosion control, and other coastal activities.
Learn more about ecosystems here:
https://brainly.com/question/13979184
#SPJ11
The zone of still water near the coastline is called a "littoral zone". This term refers to the area of the ocean that is shallow enough to be influenced by the coastline and the waves that crash against it.
The littoral zone can extend from the high tide line to the point where waves no longer have an effect on the seabed. The littoral zone is an important habitat for many marine creatures, including various types of fish, shellfish, and seaweed. These organisms are adapted to living in the shallow waters of the coastline, where they can take advantage of the abundant sunlight and nutrients that are available. The littoral zone can also have a significant impact on the coastal ecosystem. For example, the waves that crash against the coastline can erode the shoreline and change the shape of the coastline over time.
Additionally, the littoral zone can act as a buffer zone, helping to protect inland areas from the effects of storms and erosion. Overall, the littoral zone is an important part of the coastal ecosystem, providing a home for many marine organisms and playing a crucial role in shaping the coastline and protecting inland areas from the effects of storms and erosion.
For more such questions on littoral zone
https://brainly.com/question/1133225
#SPJ11
in this configuration, where would the larger tidal bulge, smaller tidal bulge, and low tide be located?
The far side of the Earth would have the bigger tidal bulge, the close side would have the smaller tidal bulge, and the side of the Earth facing the opposite direction would have low tide.
Ocean water, which is fluid and mobile, is drawn towards the moon by the gravitational force between the moon and the Earth. This causes a "bulge" in the ocean's surface nearest to the moon, and as the Earth spins, the impacted waters' locations shift.
The bulge on the far side of the Earth is a result of inertia. The water that is moving away from the moon resists the gravitational forces that attempt to drag it away from it. Inertia wins out, the ocean swells, and high tide occurs on the opposite side of the Earth from the moon where the moon's gravitational attraction is weaker.
To know more about low tides and moon visit:
https://brainly.com/question/1125070
#SPJ4
Answer: The larger tidal bulge occurs on the side of the Earth facing the Moon, smaller tidal bulge is located on the opposite side of the Earth, away from the Moon and low tides occur in the areas between the two tidal bulges.
Explanation: This is due to the gravitational force exerted by the Moon on the Earth's water, causing a stretching effect. The water closest to the Moon experiences a stronger gravitational pull, leading to a high tide, or the larger tidal bulge. The smaller tidal bulge is located on the opposite side of the Earth, away from the Moon. While it might seem counterintuitive, this bulge is created because the gravitational force exerted by the Moon is weaker on the far side of the Earth. This causes the Earth to be slightly stretched along the Earth-Moon line, resulting in a smaller tidal bulge at this location.
Low tides occur in the areas between the two tidal bulges, where the water is "pulled" away from the Earth's surface to create the high tides. This reduction in water level leads to low tide regions on Earth. In summary, the larger tidal bulge is found on the side of the Earth facing the Moon, the smaller tidal bulge is on the opposite side of the Earth, and low tides are located between these two bulges.
For more such questions on tidal bulge
https://brainly.com/question/30420408
#SPJ11
which of the following patterns of annual precipitation are caused by hadley cell circulation group of answer choices high amounts of rainfall during the summer in california low precipitation at the poles low precipitation on the leeward side of a mountain range high rainfall at 30n and 30s, with lower precipitation near the equator high rainfall at the equator
High rainfall at the equator is caused by Hadley cell circulation. This circulation pattern results in significant amounts of rainfall and precipitation in regions near the equator, as warm, moist air rises and then cools, releasing moisture in the form of precipitation.
The cooled, dry air then sinks back down to the surface near the poles, creating dry and arid conditions. This pattern is known as the Hadley cell circulation and plays a major role in global climate patterns. The Hadley cell is a large-scale atmospheric circulation pattern that transports heat and moisture from the equator to the tropics and beyond. It is driven by the temperature difference between the equator and the poles and the rotation of the Earth. The Hadley cell is responsible for many of the world's major climate zones and weather patterns. In the Hadley cell, warm air rises at the equator and moves towards the poles, where it cools and sinks back down to the surface. As it rises and cools, it releases moisture in the form of precipitation. This leads to high amounts of rainfall at around 30 degrees north and south of the equator, which is where the sinking air is the driest.
Learn more about temperature here:
https://brainly.com/question/11464844
#SPJ11
Which examples are associated with subsistence agriculture?
Select correct answers. A. Bartering (trade food for food- ex: three ears of corn for three yams)
B. Heavy machinery
C. Feedlots that sell produce
D. Small pastures
E. Large plantations
Large plantations and bartering are associated with subsistence agriculture. The right answer is a and e.
Subsistence farming is a type of agriculture in which the farmer and his or her family consume almost all of the crops or livestock produced, leaving little to no extra for sale or trade. Subsistence farming has historically been done by preindustrial agricultural peoples all throughout the world.
As the soil at each location became depleted, a few of these people moved from one place to another. Farmers developed commercial farming as urban areas expanded, specialising agricultural output and produced large surpluses of some commodities that they either sold for cash or swapped for manufactured goods.
The correct answers are options A and E.
Know more about subsistence agriculture here
https://brainly.com/question/29765102
#SPJ4
which water source may be placed within strategic locations by some suburban and urban jurisdictions as a backup water supply system? select one: a. ground reservoirs b. private water storage tanks c. cisterns d. swimming pools
The water source that may be placed within strategic locations by some suburban and urban jurisdictions as a backup water supply system is: c. cisterns.
The water source that may be placed within strategic locations by some suburban and urban jurisdictions as a backup water supply system is C. Cisterns. Cisterns are containers designed for storing water, which can be placed underground or above ground, and are commonly used to collect rainwater for later use. In some jurisdictions, cisterns may be placed in strategic locations as a backup water supply system, especially in areas prone to droughts or water shortages. Ground reservoirs, private water storage tanks, and swimming pools may also be used for storing water, but they are typically not used as backup water supply systems in suburban or urban areas.
Learn more about reservoirs here:
https://brainly.com/question/26888545
#SPJ11
1. compare the sea level anomaly maps from feb 2017 and feb 2021. a. what differences do you notice between them?
The sea level anomaly maps from February 2017 and February 2021 show significant differences in the distribution and intensity of anomalies.
The sea level anomaly maps from February 2017 and February 2021 show some noticeable differences. Firstly, the overall pattern of sea level anomalies has changed. In 2017, there were large areas of negative anomalies in the Pacific and Indian Oceans, while in 2021, these negative anomalies have reduced in size and intensity. At the same time, there are now areas of positive anomalies in the Pacific and Atlantic Oceans that were not present in 2017.
Another difference is that the magnitude of the anomalies has changed. In 2021, the anomalies are generally smaller than in 2017, particularly in the areas that previously had the largest anomalies. This could indicate a reduction in the rate of sea level rise over the past four years, but further research would be needed to confirm this.
Overall, the sea level anomaly maps from February 2017 and February 2021 show significant differences in the distribution and intensity of anomalies. While it is not yet clear what these differences mean in terms of long-term sea level trends, they highlight the importance of continued monitoring and analysis of changes in the world's oceans.
For more such questions on anomaly maps
https://brainly.com/question/31538499
#SPJ11
Sea level anomaly maps depict the deviation of sea level from its long-term average. Typically, sea level anomalies are expressed in units of centimeters or inches.
One major difference that might be observed between sea level anomaly maps from February 2017 and February 2021 is the magnitude and spatial patterns of the anomalies. In February 2017, the sea level anomaly might have been lower or higher in some areas compared to the long-term average, while in February 2021, the sea level anomaly might have been different in other locations.Another possible difference between the two maps might be related to the causes of the sea level anomalies. Sea level anomalies can be influenced by a range of factors, including ocean currents, winds, tides, and changes in atmospheric pressure, among others. It is possible that the differences between the two maps could reflect changes in these factors over time.Overall, without access to the specific sea level anomaly maps in question, it is difficult to provide a more detailed comparison of the differences between the two maps.
learn more about observed here:https://brainly.com/question/28041973
#SPJ11
in the northern hemisphere what is the difference in how the sides of a low pressure system develop during the formation of a mid latitude cyclone
In the northern hemisphere, the sides of a low pressure system in the formation of a mid-latitude cyclone develop in a counterclockwise direction. This is due to the Coriolis effect, which is caused by the Earth's rotation and deflects moving objects to the right in the northern hemisphere. This results in the counterclockwise rotation of the cyclone and the development of the warm front on the eastern side and the cold front on the western side.
During the formation of a mid-latitude cyclone in the northern hemisphere, the sides of a low-pressure system develop differently. The side of the low-pressure system to the east of the center of the cyclone experiences a stronger pressure gradient force due to the faster movement of the jet stream in that direction. As a result, the air on this side of the low-pressure system rises more rapidly, leading to stronger upward vertical motion and the development of more intense precipitation and thunderstorms. On the other hand, the side of the low-pressure system to the west of the center of the cyclone experiences weaker pressure gradients due to the slower movement of the jet stream in that direction. As a result, the air on this side rises less rapidly and tends to form more stratiform clouds, leading to less intense precipitation and a more gradual decrease in atmospheric pressure. Overall, the different pressure gradients on the two sides of the low-pressure system contribute to the development of a complex weather system that includes a range of precipitation types and wind patterns, as well as changes in temperature and humidity. The exact positioning and strength of these fronts can be influenced by the latitude of the cyclone's formation, as the Coriolis effect is stronger at higher latitudes. In the Northern Hemisphere, the development of a low-pressure system in a mid-latitude cyclone involves the Coriolis effect, which causes winds to move counterclockwise around the low-pressure center. This rotation is due to the Earth's rotation and the variation in latitude, resulting in a distinct pattern of convergence and divergence that shapes the cyclone's structure.
To learn more about western click the link below:
brainly.com/question/29399200
#SPJ11
profile across kessler mountainif the distance between a and a is 1.5 miles, then what is the vertical exaggeration of the topographic profile that you constricted above?
The vertical exaggeration of the topographic profile is Y/(5,280*X).
To calculate the vertical exaggeration of the topographic profile, we need to know the ratio of the vertical scale to the horizontal scale.
This ratio is equal to the vertical exaggeration of the profile.Let's first convert the distance between points A and A on the profile to inches, since the scales are given in terms of inches.
If the distance between A and A on the profile is 1.5 miles, and the horizontal scale is X miles per inch, then the distance between A and A on the profile in inches is:
1.5 miles * (1/X miles per inch) = 1.5/X inches
Now, we need to find the ratio of the vertical scale to the horizontal scale, which will give us the vertical exaggeration.
If the vertical scale is Y feet per inch, then the ratio of the vertical scale to the horizontal scale is:
Y feet per inch / X miles per inch
To simplify this ratio, we need to convert the vertical scale from feet to miles. There are 5,280 feet in a mile, so:
Y feet per inch = (Y feet per inch) * (1 mile per 5,280 feet) = Y/5,280 miles per inch
Now, we can substitute this into the ratio:
(Y/5,280 miles per inch) / (X miles per inch) = Y/(5,280*X)
-----------The given question is incomplete, the complete question is:
"Assuming a horizontal scale of X miles per inch and a vertical scale of Y feet per inch, what is the vertical exaggeration of the topographic profile constructed across Kessler Mountain, if the distance between point A and point A on the profile is 1.5 miles?"-----------
To know more about topographic, click here.
https://brainly.com/question/29764663
#SPJ4
which type of city model contains a distinct residential spine proceeding outward from center city along the main boulevard?
The type of city model that contains a distinct residential spine proceeding outward from the center city along the main boulevard is the Sector Model, also known as the Hoyt Model.
The type of city model that contains a distinct residential spine proceeding outward from center city along the main boulevard is known as the "spine and node" model. This model is characterized by a central business district or "node" at the center of the city, with residential areas radiating outward along major transportation corridors, typically along a main boulevard or "spine." This type of model is often found in cities that have experienced rapid growth and urbanization, and is designed to accommodate large numbers of residents while maintaining efficient transportation and infrastructure.
Learn more about boulevard here:
https://brainly.com/question/16130982
#SPJ11
The type of city model that contains a distinct residential spine proceeding outward from center city along the main boulevard is known as the "spine and loop" model. This model typically features a central business district surrounded by a loop highway, with a residential spine branching out from the loop along the main boulevard. The spine is characterized by residential development, while commercial and industrial activities are typically located within the loop.
The type of city model that contains a distinct residential spine proceeding outward from the center city along the main boulevard is known as the "spine-and-loop" model. This model is also referred to as the "radial-circumferential" model and is commonly observed in many American cities developed during the early 20th century.The spine-and-loop model features a central business district at the heart of the city, surrounded by a radial network of main boulevards or avenues. Along each of these major thoroughfares, a residential spine develops, with rows of residential buildings extending outwards from the center city. The residential spines are then connected by looped streets, which provide access to the neighborhoods between the spines.The spine-and-loop model has several advantages, including a high level of accessibility, as well as the potential for commercial and residential growth along the main thoroughfares. Additionally, the model allows for easy navigation and efficient transportation, as well as a sense of community within each neighborhood. However, the model can also be criticized for promoting urban sprawl and car-dependent lifestyles, as well as limiting pedestrian and bicycle access.Overall, the spine-and-loop model remains a significant example of urban planning and design, and it continues to influence the development of cities around the world. The type of city model that contains a distinct residential spine proceeding outward from the center city along the main boulevard is the Sector Model, also known as the Hoyt Model.
To learn more about residential click on the link below:
brainly.com/question/29898240
#SPJ11