The length of the hallway is 20 feet. To calculate the length of the hallway in feet, we need to first convert the measurements to the same unit of measurement. Let's convert the second part from yards to inches, since the first part is already in inches:
3 yards = 3 x 36 inches = 108 inches
Now we can add the two lengths together:
Total length = 132 inches + 108 inches = 240 inches
Finally, we can convert the total length from inches to feet by dividing by 12:
Total length = 240 inches ÷ 12 = 20 feet
Therefore, the length of the hallway is 20 feet.
Learn more about hallway
https://brainly.com/question/16400635
#SPJ4
Full Question ;
The girl was measuring the hallway the first part was 132 inches long the second part was 3 yards long how long is the Hallway in feet??
calculate the osmotic pressure (in atm) at 17.4 degrees c of a solution made by dissolving 7.19 g of glucose in 18.9 ml of solution.
The osmotic pressure of a solution made by dissolving 7.19 g of glucose in 18.9 ml of solution at 17.4°C can be calculated using the formula: Osmotic Pressure (atm) = Molarity (M) × Gas Constant (R) × Temperature (T).
Molarity = (Mass of Solute/ Molar Mass of Solute) / Volume of Solution
= (7.19 g / 180.2 g/mol) / 18.9 ml
= 0.3999 M
Gas Constant (R) = 0.08206 liter atm/mol K
Temperature (T) = 17.4°C + 273.15 = 290.55 K
Therefore, Osmotic Pressure (atm) = 0.3999 M × 0.08206 liter atm/mol K × 290.55 K
= 0.983 atm
The osmotic pressure of a solution is the hydrostatic pressure required to balance the osmotic pressure of a solution. This is determined by the concentration of the solute molecules, temperature, and the properties of the solvent. The osmotic pressure of a solution can be used to determine the boiling point, vapor pressure, and vapor pressure of a solution. Additionally, it is important for the transport of substances across biological membranes, as well as for the stability of colloidal suspensions.
In summary, the osmotic pressure (in atm) of a solution made by dissolving 7.19 g of glucose in 18.9 ml of solution at 17.4°C can be calculated using the formula: Osmotic Pressure (atm) = Molarity (M) × Gas Constant (R) × Temperature (T), and is equal to 0.983 atm.
To know more about osmotic pressure click on below link :
https://brainly.com/question/15501096#
#SPJ11
for the next several questions, use the following information: a 2.00 g sample of ammonia (nh3 ) reactants with 4.00 g of oxygen to form nitrogen monoxide and water. all of the reactants and products are gases. do not forget about diatomic molecules.
Since we are given the reactants and products in a chemical reaction, we can write the balanced chemical equation as:
4 NH3 + 5 O2 → 4 NO + 6 H2O
From the balanced equation, we can see that 4 moles of NH3 react with 5 moles of O2 to form 4 moles of NO and 6 moles of H2O.
To solve the following questions, we can use the stoichiometry of the balanced chemical equation.
How many moles of NH3 are in the sample?
The molar mass of NH3 is 17.03 g/mol, so the number of moles of NH3 in the sample is:
2.00 g / 17.03 g/mol = 0.1173 mol NH3
How many moles of O2 are in excess?
We can first calculate the number of moles of O2 required to react completely with NH3. From the balanced equation, we know that 4 moles of NH3 react with 5 moles of O2, so the number of moles of O2 required is:
0.1173 mol NH3 × (5 mol O2 / 4 mol NH3) = 0.1466 mol O2
The actual amount of O2 used is 4.00 g / 32.00 g/mol = 0.125 mol O2, so the number of moles of O2 in excess is:
0.125 mol O2 - 0.1466 mol O2 = -0.0216 mol O2
Since the value is negative, it means that O2 is the limiting reactant, and NH3 is in excess.
How many moles of H2O are produced?
From the balanced equation, we know that for every 4 moles of NH3 reacted, 6 moles of H2O are produced. Therefore, the number of moles of H2O produced is:
0.1173 mol NH3 × (6 mol H2O / 4 mol NH3) = 0.1760 mol H2O
What is the mass of NO produced?
The molar mass of NO is 30.01 g/mol, so the mass of NO produced is:
0.1173 mol NH3 × (4 mol NO / 4 mol NH3) × 30.01 g/mol = 3.52 g NO
For more questions like reactants visit the link below:
https://brainly.com/question/31263593
#SPJ11
The major product of the synthesis, 3-methoxyheptane, is produced by an SN2 mechanism. Complete the reaction mechanism below by adding curved arrows showing electron flow and the final product, including the correct stereochemistry, to demonstrate the formation of the major product (3-methoxyheptane).
To demonstrate the formation of 3-methoxyheptane through an SN2 mechanism, follow these steps:
1. Identify the nucleophile and electrophile: The nucleophile is the methoxide ion (CH3O-) and the electrophile is the alkyl halide, such as 1-chloroheptane (C7H15Cl).
2. Show the electron flow using curved arrows: Draw a curved arrow from the lone pair on the oxygen atom of the methoxide ion to the carbon atom bonded to the chlorine in 1-chloroheptane. This arrow represents the nucleophilic attack.
3. Show the leaving group departure: Draw another curved arrow from the carbon-chlorine bond in 1-chloroheptane to the chlorine atom. This arrow represents the departure of the chloride ion (Cl-) as the leaving group.
4. Draw the final product with the correct stereochemistry: As SN2 reactions lead to inversion of stereochemistry, if the starting 1-chloroheptane had an R configuration, the final product, 3-methoxyheptane, would have an S configuration (and vice versa). So, draw the final product with the methoxy group (OCH3) attached to the third carbon atom of the heptane chain, and the correct stereochemistry based on the starting material.
The resulting structure will be 3-methoxyheptane, with the appropriate stereochemistry.
A lab technician adds 0.20 mol of NaF to 1.00 L of 0.35 M cadmium nitrate, Cd(NO3)2. Which of the following statements is correct? Ksp=6.44 x 10^(-3) for CdF2. A) The presence of NaF will raise the solubility of Cd(NO3)2B) The solubility of cadmium fluoride is increased by the presence of additional fluoride ions.C) One must know Ksp for cadmium nitrate to make meaningful predictions on this system. D) Cadmium fluoride precipitates until the solution is saturated. E) The solution is unsaturated and no precipitate forms. stel et shnt nan ha added to 1.00 L of
When a lab technician adds 0.20 mol of NaF to 1.00 L of 0.35 M cadmium nitrate, Cd(NO3)2, the correct statement is that B) The solubility of cadmium fluoride is increased by the presence of additional fluoride ions.
How does the addition of anions affect the solubility of salts?The solubility of salts is influenced by the presence of anions.
The solubility of salts is increased by the presence of anions in some cases. Anions reduce the solubility of salts in other cases. Cadmium nitrate (Cd(NO3)2) has a Ksp of 6.44 × 10−3, which must be compared to the ion product (IP) for Cd(NO3)2 in solution to decide whether precipitation will occur. Cd(NO3)2 is a soluble salt that ionizes according to the following equation:
Cd(NO3)2 → Cd2+ + 2 NO3−.
According to the solubility product rule, the IP for Cd(NO3)2 is determined as IP = [Cd2+][NO3−]^2. Because cadmium fluoride (CdF2) is less soluble than cadmium nitrate, it must be compared to the IP for CdF2 in solution to decide whether precipitation will occur. The ion product (IP) for CdF2 in solution can be calculated using the stoichiometry of the equilibrium between Cd2+ and F− ions: Cd2+(aq) + 2F−(aq) → CdF2(s).
Thus, IP = [Cd2+][F−]^2. As a result, the addition of fluoride ions to the Cd(NO3)2 solution in the form of NaF increases the solubility of cadmium fluoride because the concentration of F− ions is increased. As a result, option B is correct.
Learn more about solubility at
https://brainly.com/question/28170449
#SPJ11
consider the compounds cl2, hcl, f2, naf, and hf. which compound has a boiling point closest to that of argon? explain.
The compound that has a boiling point closest to that of Argon is HF. This is because HF has the strongest intermolecular forces (hydrogen bonding) among the given compounds.
The boiling point of a compound depends on the strength of the intermolecular forces that exist between the molecules. The stronger the intermolecular forces, the higher the boiling point.
The weaker the intermolecular forces, the lower the boiling point. The boiling point of Argon is -186°C. Out of the given compounds, the boiling point of HF is the closest to the boiling point of Argon.
The boiling point of HF is -83.8°C. This is because HF has hydrogen bonding which is the strongest intermolecular force among the given compounds. The other compounds such as Cl2, F2, HCl, and NaF, have weaker intermolecular forces than HF. Therefore, they have a lower boiling point than HF.
Learn more about HF here:
https://brainly.com/question/14581360#
#SPJ11
partial older osteons can be found between complete newer osteons. these partial osteons are referred to as
Partial, older osteons are cylindrical structures that are found between newer, more complete osteons. These structures, also known as fragments,
consist of concentric layers of lamellae surrounding a central canal, or Haversian canal.
The lamellae and the Haversian canal are formed during the process of osteon remodeling, which involves the removal of old osteons and their replacement with new ones.
The fragments of old osteons that remain in the matrix between new osteons are referred to as “intermediate,” “intermediate osteons,” or “partial osteons.”
They can be distinguished from the newer, complete osteons by their decreased size and lack of a central Haversian canal.
Partial osteons are important for a number of reasons. They help maintain the structural integrity of the bone, provide additional strength and stability, and increase the bone’s resistance to compressive and tensile stresses.
Partial osteons also act as an area of interface between two different age groups of osteons, allowing them to resist shear forces.
Finally, the presence of partial osteons in the bone matrix may increase the rate of healing after fracture or trauma.
to know more about osteons refer here:
https://brainly.com/question/30327119#
#SPJ11
the buret will be filled with 0.3000 m hcl and 25 ml of 0.40 m nahco3 solution will be in the beaker with methyl orange as the indicator. write a complete balanced equation for the neutralization reaction between hcl and nahco3.
The complete balanced equation for the neutralization reaction between HCl and NaHCO₃ is:
HCl + NaHCO₃ → NaCl + H₂O + CO₂
The reaction between hydrochloric acid (HCl) and sodium bicarbonate (NaHCO₃) is known as a neutralization reaction. In this reaction, HCl and NaHCO₃ combine to produce NaCl, water, and carbon dioxide.
The reaction can be represented by the following equation: HCl + NaHCO₃ → NaCl + H₂O + CO₂
This reaction already the balanced chemical equation for the reaction since the number of each element in the reactant side is equal to the number of each element in the product side.
Learn more about balanced equation here: https://brainly.com/question/11904811.
#SPJ11
assuming ideal behavior, how many liters hcl gas are required to make concentrated hydrochloric acid (11.6 mol/l) at 25oc and 1 atm pressure?
520.67 liters of HCl gas are required to make concentrated hydrochloric acid (11.6 mol/L) at 25°C and 1 atm pressure. while assuming ideal behavior.
To make concentrated hydrochloric acid (11.6 mol/L) at 25°C and 1 atm pressure, the volume of HCl gas needed is 520.67 L.
Assuming ideal behavior,
Molarity (M) = number of moles of solute/volume of solution in liters (L)
Given:
Molarity (M) = 11.6 mol/L
Volume of solution (V) = ?
Temperature (T) = 25°C
Pressure (P) = 1 atm
We can use the ideal gas law to find the volume of HCl gas required to make 1 L of concentrated HCl. Then, we can use this value to find the volume of HCl gas required to make a certain volume of concentrated HCl. The ideal gas law is given as:
PV = nRT
where: P is pressure, V is volume of the gas, n is the number of moles of gas, R is the gas constant, T is the temperature. We can rearrange the ideal gas law to solve for volume:
V = nRT/PAt
standard temperature and pressure (STP), 1 mole of an ideal gas occupies 22.4 L.
Therefore, the number of moles of HCl gas required to make 1 L of concentrated HCl is given as:
11.6 mol/L × 1 L = 11.6 moles
We can substitute these values into the ideal gas law equation and solve for the volume of HCl gas required to make 1 L of concentrated HCl:
V = nRT/PV = (11.6 mol) × (0.08206 L·atm/K·mol) × (298 K)/(1 atm)V
= 260.51 L
However, we are interested in finding the volume of HCl gas required to make a certain volume of concentrated HCl. We can use the following conversion factor to find the volume of HCl gas required:
1 L concentrated HCl = 260.51 L HCl gas
We can use dimensional analysis to solve for the volume of HCl gas required to make 1 L of concentrated HCl:
11.6 mol/L × 1 L concentrated HCl × (260.51 L HCl gas/1 L concentrated HCl) = 3020.37 L HCl gas
However, this calculation gives the volume of HCl gas required to make 1 L of concentrated HCl.
We are interested in finding the volume of HCl gas required to make a certain amount of concentrated HCl.
We can use the following formula to solve for the volume of HCl gas required to make a certain amount of concentrated HCl:
V2 = V1 × (M1/M2)
where:V1 is the volume of concentrated HCl needed
M1 is the molarity of concentrated HCl
M2 is the molarity of the HCl gas
V2 is the volume of HCl gas needed
We can substitute the given values into the formula and solve for
V2:V2 = (1 L) × (11.6 mol/L)/(0.08206 L·atm/K·mol × 298 K)V2
= 520.67 L
Therefore, 520.67 liters of HCl gas are required to make concentrated hydrochloric acid (11.6 mol/L) at 25°C and 1 atm pressure.
For more such questions on ideal behavior , Visit:
https://brainly.com/question/28302575
#SPJ11
If 1 litre of 2.2m sulphuric acid is poured into a bucket containing 10 litres of water and the resulting solution is mixed thoroughly the resulting sulfuric acid concentration will be
11. calculate the volume of hcl that fully reacted with the calcium carbonate, showing all steps. note: this is not the total volume of hcl initially added nor is it the amount needed to neutralize the titrant!
Calculating the volume of HCl that fully reacted with calcium carbonate, the following steps should be followed:
Step 1: Write the balanced chemical equation for the reaction between HCl and calcium carbonate.
CaCO3 + 2HCl → CaCl2 + CO2 + H2O
Step 2: Calculate the molar mass of CaCO3.CaCO3: 1(40.08) + 1(12.01) + 3(16.00) = 100.09 g/mol
Step 3: Calculate the moles of CaCO3 used.
Mass of CaCO3 used = 0.548 g
Moles of CaCO3 used = 0.548 g / 100.09 g/mol = 0.00548 mol
Step 4: Use the balanced chemical equation to determine the moles of HCl required to react completely with the CaCO3. According to the balanced equation, 2 moles of HCl react with 1 mole of CaCO3.
Therefore, the number of moles of HCl required is:
2 mol HCl/mol CaCO3 × 0.00548 mol CaCO3 = 0.01096 mol HCl
Step 5: Calculate the volume of HCl required to provide this number of moles. The molarity (M) of the HCl solution is given as 0.101 M.
Using the formula for molarity (M = moles of solute/liters of solution), we can rearrange the equation to solve for volume.
The volume of HCl = moles of solute / molarity= 0.01096 mol / 0.101 mol/L = 0.1086 L or 108.6 mL
Therefore, the volume of HCl that fully reacted with the calcium carbonate is 108.6 mL.
Note that this is not the total volume of HCl initially added nor is it the amount needed to neutralize the titrant.
to know more about balanced equation refer here:
https://brainly.com/question/7181548#
#SPJ11
a vessel contains 112 1 2 l of milk. john drinks 14 1 4 l of milk; joe drinks 12 1 2 l of milk. how much of milk is left in the vessel?
There is 73 3/4 liters of milk left in the vessel.
John drank 14 1/4 liters of milk and Joe drank 12 1/2 liters of milk. This means that a total of 26 3/4 liters of milk was consumed from the vessel. 112 1/2 liters of milk was the total amount of milk in the vessel, so if we subtract the 26 3/4 liters that was consumed from the vessel, we can calculate the remaining amount of milk left in the vessel.
Calculate the total amount of milk that was consumed.
John drank 14 1/4 liters of milk and Joe drank 12 1/2 liters of milk. This means that a total of 26 3/4 liters of milk was consumed from the vessel.
Calculate the amount of milk left in the vessel.
The total amount of milk in the vessel was 112 1/2 liters. If we subtract the 26 3/4 liters that was consumed from the vessel, we can calculate the remaining amount of milk left in the vessel: 112 1/2 liters - 26 3/4 liters = 73 3/4 liters.
In this problem, we needed to calculate the amount of milk left in the vessel after two people drank from it. We did this by first calculating the total amount of milk that was consumed (John drank 14 1/4 liters of milk and Joe drank 12 1/2 liters of milk). Then, we calculated the remaining amount of milk left in the vessel by subtracting the amount of milk consumed from the total amount of milk in the vessel (112 1/2 liters - 26 3/4 liters = 73 3/4 liters).
To know more about diluted milk click on below link :
https://brainly.com/question/30203634#
#SPJ11
) assume a basis of 1 mole of feed and draw and label a flowchart. carry out a degree-of-freedom analysis of the reactor based on the extent of reaction. (b) calculate the total moles of gas in the reactor at equilibrium and then the equilibrium mole fraction of hydrogen in the product. (c) suppose a gas sample is drawn from the reactor and analyzed shortly after startup and the mole fraction of hydrogen is significantly different from the calculated value. assuming the calculations are correct, what is a likely explanation for the discrepancy? (d) use a method numerical method of your choice to take the input of the reactor temperature and the input feed component mole fractions of co, h2o, and co2 (assume no hydrogen is fed) and to calculate the mole fraction h2 x in the product gas when equilibrium is reached. present your results in a table. use your numerical method to try and maximize the yield of hydrogen by adjusting the temperature and feed composition.
you need to draw and label a flowchart and carry out a degree-of-freedom analysis of the reactor based on the extent of reaction, then calculate the total moles of gas in the reactor at equilibrium and the equilibrium mole fraction of hydrogen in the product.
If the mole fraction of hydrogen is significantly different from the calculated value, the discrepancy can likely be attributed to an imbalance between the reactants and products.
You can use a numerical method of your choice to take the input of the reactor temperature and the feed component mole fractions of CO, H2O, and CO2 to calculate the mole fraction H2 x in the product gas when equilibrium is reached.
From there, you can adjust the temperature and feed composition to maximize the yield of hydrogen.
To know more about mole fraction click on below link:
https://brainly.com/question/29808190#
#SPJ11
11.2 dm3 of nh3 (as measured in normal conditions) were dissolved in 100 cm3 of water. what is the mass percent concentration of the obtained ammonia solution?
The mass percent concentration of the obtained ammonia solution is approximately 0.00833%.
To determine the mass percent concentration of an ammonia solution, we need to know the mass of ammonia present in the solution and the total mass of the solution.
In this case, we are given that 11.2 dm3 of NH3 gas, as measured in normal conditions (which is equivalent to 0.0112 m3), were dissolved in 100 cm3 of water. To calculate the mass of ammonia present in the solution, we first need to calculate the number of moles of NH3 using the ideal gas law, PV = nRT, where P is the pressure, V is the volume, n is the number of moles, R is the gas constant, and T is the temperature.
Assuming standard temperature and pressure (STP), we can use a pressure of 1 atm and a temperature of 273 K, giving us:
[tex]$n = \frac{PV}{RT}[/tex]
[tex]= \frac{(1 \text{ atm} * 0.0112 \text{ m}^3)}{(0.08206 \text{ L atm/mol K} * 273 \text{ K})} = 0.000489 \text{ mol}$[/tex]
The molar mass of NH3 is 17.03 g/mol, so the mass of NH3 present in the solution is:
mass NH3 = n * molar mass
= 0.000489 mol * 17.03 g/mol
= 0.00833 g
To calculate the mass percent concentration, we divide the mass of NH3 by the total mass of the solution (which is the mass of NH3 plus the mass of water):
mass percent concentration = [tex]\frac{mass,NH_3}{total,mass} \times 100%$[/tex]
The mass of water is equal to its volume times its density, which is approximately 1 g/cm3:
mass water = [tex]100\text{ cm}^3 * 1\text{ g/cm}^3 = 100\text{ g}$[/tex]
Therefore, the total mass of the solution is:
total mass = mass NH3 + mass water = 0.00833 g + 100 g = 100.00833 g
Substituting these values, we get:
mass percent concentration = [tex]\frac{0.00833 \text{ g}}{100.00833 \text{ g}} \times 100%[/tex]
= 0.00833%
To learn more about ammonia solution
https://brainly.com/question/18688514
#SPJ4
what is the molarity of the solution formed by dissolving 10.0g of ca(no3)2 in 250 ml aqueous solution
Answer: The molarity of the solution formed by dissolving 10.0g of Ca(NO3)2 in 250 mL of aqueous solution is
0.244 M.
The molarity of the solution formed by dissolving 10.0g of Ca(NO3)2 in 250 mL of aqueous solution can be calculated using the following equation: Molarity (M) = (moles of solute / liters of solution).
In this case, we have 10.0 g of Ca(NO3)2, so we first need to convert it to moles. To do this, we multiply the grams of Ca(NO3)2 by its molar mass, which is 164.08 g/mol: 10.0 g × (1 mol/164.08 g) = 0.061 mol.
We also have 250 mL of aqueous solution, which is equivalent to 0.25 L. Plugging these values into the equation above gives us: M = (0.061 mol/0.25 L) = 0.244 M.
Therefore, the molarity of the solution formed by dissolving 10.0g of Ca(NO3)2 in 250 mL of aqueous solution is 0.244 M.
Learn more about molarity here:
https://brainly.com/question/26416088?referrer=searchResults
#SPJ11
were the reactions in part c endothermic or exothermic? how did you know that the reactions were endothermic or exothermic? why was it necessary to use two different concentrations of hcl in the reactions?
The reactions in Part C were endothermic reaction. This can be determined by looking at the sign of the enthalpy change (ΔH) of the reaction. If ΔH is positive, then the reaction is endothermic; if it is negative, then the reaction is exothermic. It was necessary to use two different concentrations of HCl in the reactions in order to measure the heat of neutralization of different concentrations of HCl with sodium hydroxide (NaOH).
This is because the enthalpy of neutralization is directly proportional to the concentration of the two reactants. Higher concentrations lead to more heat generated and higher enthalpies, and lower concentrations lead to less heat generated and lower enthalpies.
The heat of neutralization is the amount of heat released or absorbed when an acid and a base are mixed together to form a salt and water. This can be measured using a calorimeter, which measures the amount of heat released or absorbed by the reaction. When two different concentrations of HCl and NaOH are mixed together in the calorimeter, the resulting enthalpy change is the heat of neutralization. '
Know more about endothermic reactions here:
https://brainly.com/question/23184814
#SPJ11
which of the following is the most likely range of values for human body density? a. 0.900 - 1.100 g/cc b. 1.09 - 1.105 g/cc c. 0.99 - 1.02 g/cc d. 1.02-1.08 g/cc
The most likely range of values for human body density is 0.900 - 1.100 g/cc.(A)
Option (b) 1.09 - 1.105 g/cc is not the most likely range of values for human body density.
Option (c) 0.99 - 1.02 g/cc and option (d) 1.02-1.08 g/cc are also not the most likely range of values for human body density.
Body density is the mass of the human body divided by the volume it occupies. The density of the human body depends on the mass and volume of the body's internal organs, muscle mass, and the amount of adipose tissue present in the body.
The density of the human body typically ranges from 0.900 g/cc to 1.100 g/cc. This range may vary depending on several factors, including age, gender, body composition, and other health factors.
However, the most likely range of values for human body density is 0.900 - 1.100 g/cc.
To know more about adipose tissue click on below link:
https://brainly.com/question/30782617#
#SPJ11
if 37.2 kj of energy is evolved when 100. g of glucose is fermented, what is the molar enthalpy of fermentation?
If 37.2 kJ of energy is evolved when 100g. So, the molar enthalpy of fermentation is 67 kJ/mol.
The molar enthalpy of fermentation can be calculated as follows:
From the equation, 1 mole of glucose yields 2 moles of ethanol and 2 moles of carbon dioxide. Thus, the balanced equation for this process is:
C₆H₁₂O₆ (aq) → 2C₂H₅OH(aq) + 2CO₂ (g)
From the given values, the mass of glucose that was fermented is 100 g. The molar mass of glucose is 180.16 g/mol. Thus, the number of moles of glucose can be calculated as follows:
moles of glucose = Mass of glucose / Molar mass of glucose
moles of glucose = 100 g / 180.16 g/mol
moles of glucose = 0.555 moles
The molar enthalpy of fermentation is defined as the amount of energy released per mole of fermented glucose. Thus, the molar enthalpy of fermentation can be calculated as follows:
Molar enthalpy = Energy released / moles of glucose
Molar enthalpy = 37.2 kJ / 0.555 mol
Molar enthalpy = 67 kJ/mol
Therefore, the molar enthalpy of fermentation is 67 kJ/mol.
Complete question:
The equation for the fermentation of glucose to ethanol and carbon dioxide is C6 H12 O6 (aq) 3,2CrN 5 OH(aq)+2CO 2 (g) If 37.2 kJ of energy is evolved when 100. g of glucose is fermented, what the molar enthalpy of fermentation?
Learn more about molar enthalpy at https://brainly.com/question/29295293
#SPJ11
benzene has bp of 80oc, toluene has bp of 110 oc and xylene has boiling point of 130 oc. the gc of a mixture of these three compounds should show retention times as
Answer: Benzene has a boiling point of 80oC, toluene has a boiling point of 110 oC, and xylene has a boiling point of 130 oC. The GC of a mixture of these three compounds should show retention times as benzene, toluene, xylene.
The GC of a mixture of these three compounds should show retention times as. The correct answer is Option C; benzene, toluene, xylene. The boiling points of the components indicate that they have different volatility.
Therefore, the order of volatility follows the order in which they have been mentioned in the question;
benzene < toluene < xylene
This means that as the boiling point increases, the retention time of each compound in the column also increases. Since the order of volatility is benzene < toluene < xylene, the retention times of the compounds will be as follows; benzene will have the least retention time, followed by toluene and then xylene, with the largest retention time.
Therefore, the GC of a mixture of these three compounds should show retention times as benzene, toluene, and xylene.
Learn more about retention here:
https://brainly.com/question/29709076#
#SPJ11
what term is used to describe the electrons in the outermost energy level
The term is used to describe the electrons present in the outermost energy level is the valence electrons.
The number of the electrons in the outermost shell of the particular atom that determines its reactivity, or the tendency to form the chemical bonds with the other atoms. This is the outermost shell and is known as valence shell, and the electrons present in it are called the valence electrons.
The electrons are on the outermost energy level of the atom are called the valence electrons. These are the electrons that involved in the bonding and the chemical reactions. The other electrons are the core electrons.
To learn more about electrons here
https://brainly.com/question/31179419
#SPJ4
if a sample containing 6.5 moles of nh3 is reacted with excess cuo, how many moles of each product can be made? n2
The amount of N2 (Nitrogen) produced will be limited by the amount of NH3 (Ammonia) present. Thus, the maximum amount of N2 that can be produced is 1.625 moles (which is half of the 3.25 moles calculated above). Therefore, the answer is 1.625 moles of N2.
If a sample containing 6.5 moles of NH3 is reacted with excess CuO, 1.625 moles of N2 can be produced. There are two products that can be produced by the reaction of NH3 with excess CuO: N2 and H2O. The balanced equation for this reaction is as follows: 4NH3 + 3CuO → 2N2 + 3H2O + 3CuTo determine how many moles of each product can be made, we need to use the mole ratio between NH3 and the products. From the balanced equation, we can see that for every 4 moles of NH3, 2 moles of N2 can be produced. Therefore, for 6.5 moles of NH3, we can calculate the amount of N2 produced as follows:6.5 moles NH3 × (2 moles N2/4 moles NH3) = 3.25 moles N2However, we have to remember that the reaction is carried out with excess CuO. This means that all of the NH3 will be consumed, and there will be enough CuO (Copper oxide) to react with all of it. Therefore, the amount of N2 produced will be limited by the amount of NH3 present. Thus, the maximum amount of N2 that can be produced is 1.625 moles (which is half of the 3.25 moles calculated above). Therefore, the answer is 1.625 moles of N2.
For more such questions on Moles
https://brainly.com/question/14485544
#SPJ11
for a second order reaction with an initial concentration of reactant of 64 m, what concentration of the reactant is left after three half lives?
After three half-lives, the concentration of the reactant will be 1/8 of its initial concentration. This means that the remaining concentration of the reactant after three half-lives will be 8 m.
A second order reaction is one that has a rate proportional to the product of the concentration of two reactants or the square of the concentration of one reactant. In this case, the rate of the reaction is given by the equation:
r = k[A]²
The half-life of a reaction is the amount of time it takes for the concentration of the reactant to decrease by half. The half-life of a second-order reaction is given by the equation:
t½ = 1 / (k[A]₀)
Where k is the rate constant, [A]₀ is the initial concentration of the reactant, and t½ is the half-life of the reaction. After one half-life, the concentration of the reactant will be [A] = [A]₀ / 2
After two half-lives, the concentration of the reactant will be [A] = [A]₀ / 4
After three half-lives, the concentration of the reactant will be [A] = [A]₀ / 8
Given that the initial concentration of the reactant is 64 M, the concentration of the reactant after three half-lives is:
[A] = [A]₀ / 8[A] = 64 / 8[A] = 8 M
Therefore, the concentration of the reactant that is left after three half-lives is 8 M.
For more such questions on half-life , Visit:
https://brainly.com/question/23191712
#SPJ11
what is the percent by weight (w/w%) of sugar in soda? assume the average mass of sugar in soda is 31.0 g and the total mass is 370.0 g.
The percent by weight (w/w%) of sugar in soda, assuming the average mass of sugar in soda is 31.0 g and the total mass is 370.0 g, is 8.38%.
The mass percent composition of a compound is a measure of the ratio of the mass of each component to the total mass of the compound. It is denoted by w/w%.
The mass percentage of a component in a solution can be calculated using the following formula:
the mass percent of a component = (mass of the component ÷ total mass of solution) × 100
Assume the average mass of sugar in soda is 31.0 g and the total mass is 370.0 g.
To determine the weight percentage of sugar in soda, the mass percent composition formula can be used as follows:
mass percent of sugar = (mass of sugar ÷ total mass of soda) × 100
mass percent of sugar = (31.0 g ÷ 370.0 g) × 100
mass percent of sugar = 0.0838 × 100
mass percent of sugar = 8.38%
Therefore, the percent by weight (w/w%) of sugar in soda, assuming the average mass of sugar in soda is 31.0 g and the total mass is 370.0 g, is 8.38%.
Know more about Mass percent composition here :
https://brainly.com/question/29520914
#SPJ11
Which of the following are considerations that should be taken when choosing solvents for recrystallization?The desired compound should be significantly more soluble in one solvent than the other.The solvents should be more basic than the desired compound.The two solvents should have significantly different polarity.There may be more than 1 correct answer or no correct answers.
When choosing solvents for recrystallization, the considerations that should be taken into account are: The desired compound should be significantly more soluble in one solvent than the other; the two solvents should have significantly different polarity.
Recrystallization is a method for purifying substances. It is based on the solubility of the material in the solvent. The material is dissolved in a solvent, then the solvent is removed, leaving the purified solid.
The solubility of the material in the solvent is a critical element in recrystallization. Solubility must be high enough to enable the material to dissolve, but low enough to allow the material to crystallize out of solution.
The desired compound should be significantly more soluble in one solvent than the other. If one solvent has high solubility for the compound while the other solvent has low solubility, the compound will dissolve in the high solubility solvent and remain in solution when the mixture is cooled.
The compound will precipitate out of the mixture when it reaches its saturation point, leaving behind impurities in solution.
The two solvents should have significantly different polarity. The compound should have low solubility in the solvent with lower polarity but high solubility in the solvent with higher polarity.
The high polarity solvent is used to dissolve the compound, while the low polarity solvent is used to wash away impurities. The solvent should be less reactive than the compound, non-toxic, and reasonably priced.
To know more about recrystallization, refer here:
https://brainly.com/question/29215760#
#SPJ11
what is relationship between the velocity of gas molecules in the gas phase and the temperature of the gas?
The velocity of gas molecules in the gas phase and the temperature of the gas has: a direct relationship.
When gas molecules move they have kinetic energy, which is responsible for the velocity of gas molecules in the gas phase. The velocity of gas molecules depends on the temperature of the gas. As the temperature of the gas increases, the velocity of the gas molecules increases too.
The velocity of the gas molecules also depends on the mass of the gas molecules, temperature, and pressure of the gas. In other words, the velocity of gas molecules in the gas phase is directly proportional to the temperature of the gas. This relationship is known as the Kinetic Theory of Gases.
This theory states that the higher the temperature of a gas, the faster its molecules move. This is due to the increase in the kinetic energy of the gas molecules. When the temperature of the gas is increased, the kinetic energy of the molecules also increases.
This increase in kinetic energy causes the gas molecules to move faster, which results in an increase in the velocity of gas molecules in the gas phase. When the temperature of the gas is decreased, the kinetic energy of the molecules decreases, which results in a decrease in the velocity of gas molecules in the gas phase.
Therefore, the velocity of gas molecules in the gas phase is directly proportional to the temperature of the gas.
To know more about molecules refer here:
https://brainly.com/question/19922822#
#SPJ11
formic acid is used in the venom of some species of ants. what is the ph of a 0.2 m solution of formic acid (ka
The pH of a 0.2 M solution of formic acid (Ka = 1.8x10-4) can be calculated using the Henderson-Hasselbalch equation: pH = pKa + log([A-]/[HA]). Plugging in the values gives us pH = 3.66.
The Henderson-Hasselbalch equation is used to calculate the pH of a weak acid solution. The equation states that pH = pKa + log([A-]/[HA]). Here, [A-] is the concentration of the conjugate base, and [HA] is the concentration of the weak acid. pKa is the acid dissociation constant of the weak acid. In this case, Ka = 1.8x10-4.
We can solve for pH by plugging in the values: pH = 1.8x10-4 + log([0.2]/[0.2]). This simplifies to pH = 3.66.
To know more about Handerson - Hasselbalch click on below link :
https://brainly.com/question/14839725#
#SPJ11
You have been saving pennies in a jar, and you now have 125 pennies. You want to know the total mass of the pennies before you take them to the bank. If the average penny has a mass of 2.50 g, what is the total mass of the pennies?
Total mass = number of pennies x mass per penny
Given that you have 125 pennies, and the average penny has a mass of 2.50 g, we can plug in these values to get:
Total mass = 125 x 2.50 g
Total mass = 312.50 g
Therefore, the total mass of the pennies is 312.50 grams.
Given the solubility rules from the book, which of the following metal hydroxides should be soluble in water? LiOH CuOH AgOH. Cu(OH)2 TlOH. LiOH.
The metal hydroxide that should be soluble in water among LiOH, CuOH, AgOH, Cu(OH)₂, and TlOH is LiOH.
1. LiOH: Lithium hydroxide (LiOH) is an alkali metal hydroxide, and alkali metal hydroxides are generally soluble in water. So, LiOH is soluble.
2. CuOH: Copper(I) hydroxide (CuOH) is a transition metal hydroxide, which are typically insoluble. Therefore, CuOH is not soluble.
3. AgOH: Silver hydroxide (AgOH) is also a transition metal hydroxide and is insoluble in water.
4. Cu(OH)₂: Copper(II) hydroxide (Cu(OH)₂) is another transition metal hydroxide and is insoluble in water.
5. TlOH: Thallium hydroxide (TlOH) is also a transition metal hydroxide, and like most transition metal hydroxides, it is insoluble in water.
In conclusion, among the given metal hydroxides, LiOH is soluble in water.
To know more about metal hydroxide, refer here:
https://brainly.com/question/14407261#
#SPJ11
if you repeated this experiment with a different concentration of crystal violet, would you expect to find the same order with respect to crystal violet or a different one?
For each of the following reactions, identify another quantity that is equal to DeltH degree rxn. 1. CH4(g) + 2O2(g) rightarrow CO2(g) + 2h2O(i) A. enathalpy of combustion of CH4 B. enthaply of formation of CO2(g) C. 4x bond energy of C - H D. 4x bond energy of C - H 2. CH4(g) rightarrow C(g) + $H(g) A. enthalpy of combustion of CH4 B. enthalpy of formation of C(g) C. 4x bond energy of C - H –
D. 4x bond energy of C – H
From the given reactions, another quantity that is equal to ΔH degree reaction is 1. enthalpy of combustion, 2. 4x bond energy of carbon-hydrogen bond, 3. enthalpy of formation and 4. -4x bond energy of CH bond.
Hence, the correct option is A.
Enthalpy of a reaction is defined as the total sum of the heat of the system in the reaction and the product of the pressure and volume of the system. In the first reaction, the enthalpy of combustion of methane in the presence of oxygen is calculated, which gives the change in heat during burning.
In the second reaction, bond breaking will give the heat change as 4x bond energy of the carbon and hydrogen bond is endothermic.
In the third reaction, the enthalpy of formation of methane will give the change in the enthalpy.
In the fourth reaction, the difference between the bond energies of the reactants and the products that are -4x bond energy of carbon and hydrogen will result in enthalpy change.
Hence, the bond of combustion and formation can be a component along with enthalpy.
Hence, the correct option is A.
To know more about enthalpy here
https://brainly.com/question/14017717
#SPJ4
calculate the volume in ml of a 6 m solution of hcl stock solution required to make 250 ml of 50 mm hcl?
The volume in ml of a 6 m solution of hcl stock solution required to make 250 ml of 50 mm hcl is: 20.8 ml.
To calculate the volume of a 6 M HCl stock solution required to make 250 ml of 50 mM HCl, use the following equation:
volume of stock solution (ml) = (desired concentration (mM) x volume of desired solution (ml)) / stock solution concentration (M).
Therefore, in this case, volume of stock solution (ml) = (50 mM x 250 ml) / 6 M = 20.8 ml. In other words, 20.8 ml of a 6 M HCl stock solution is required to make 250 ml of 50 mM HCl. This is because the number of moles (the amount of HCl molecules) in the solution must remain constant.
Increasing the volume of the solution by dilution means that the concentration (the amount of HCl molecules per ml of solution) must be decreased, and thus the amount of HCl stock solution must be increased.
To know more about HCl refer here:
https://brainly.com/question/30233723#
#SPJ11