The graph is given below y>x+4 is given below.
Write three points that represent solutions and non-
solutions.
Solutions
Non-Soultions

Answer: 7x - 7y + 21

Step-by-step explanation:

7( x - y + 3) = 7x - 7y + 21

The percentage change in the birth rate of a nation from 1990 to 2000 is -35%.

Percentage change is the relative difference between two values expressed as a percentage of one of the values, where the value of the latter is used as the reference point.

It can be calculated by using the following formula:

Percentage change = ((new value - old value) / old value) x 100

Given the birth rate of a nation in 1990 as 20 and the birth rate in 2000 as 13, the percentage change can be calculated as follows: Percentage change = ((13 - 20) / 20) x 100= (-7 / 20) x 100= -0.35 x 100= -35%

Hence, the percentage change is -35%.

To know more about percentage change refer here:

https://brainly.com/question/13450942#

#SPJ11

Answer:

To calculate the total milk yield in one year, we need to multiply the number of dairy cows by the amount of milk each cow produces per year:

Total milk yield = 2650 dairy cows × 2320 gallons of milk per cow per year

Total milk yield = 6,188,000 gallons per year

To write this answer in scientific notation, we need to express the number 6,188,000 as a number between 1 and 10 multiplied by a power of 10. We can do this by moving the decimal point to the left until we have a number between 1 and 10, and counting the number of decimal places we moved. In this case, we need to move the decimal point 6 places to the left:

Total milk yield = 6.188 × 10^6 gallons per year

Therefore, the dairy farm yields 6.188 × 10^6 gallons of milk per year.

Based on the attached figure, the volume of the composite figure is 408 cm³

A composite figure is a three-dimensional shape that is made up of two or more simpler shapes.

To find the volume of a composite figure, you need to break it down into its simpler shapes and then use the appropriate formulas to calculate the volume of each individual shape

The volume of the composite figure is:

Volume = area of base * height

Substituting:

Base area = (14 * 3) + (1/2)(5 + (14-6))(7 - 3) = 68 cm²; height = 6 cm

So, we have

Volume = area of base * height = 68 cm² * 6 cm = 408 cm³

This means that

The volume is 408 cm³

Hence, the volume is 408 cm³

Read more on volume at:

https://brainly.com/question/463363

#SPJ1

The value of x for the given inequality to justify the equation to get the desired result of the equation is x < - 4 .

Define inequality:

In mathematics, inequality refers to a statement that compares two values or expressions, indicating that one value or expression is greater than or less than the other. An inequality can be represented using symbols such as "<" (less than), ">" (greater than), "<=" (less than or equal to), ">=" (greater than or equal to), or "≠" (not equal to). For example, "2x + 3 > 5" is an inequality that states that the expression "2x + 3" is greater than "5". Inequalities are often used in algebra, calculus, and other branches of mathematics to represent relationships between variables or to solve equations.

What about equation in the relation?

In mathematics, an equation is a statement that asserts the equality of two expressions. An equation consists of two expressions, separated by an equals sign "=" and it states that the value of one expression is equal to the value of the other expression. The expressions in an equation can contain variables, constants, and mathematical operations such as addition, subtraction, multiplication, and division. Equations are used in many areas of mathematics to describe relationships between variables, to solve problems, and to make predictions. For example, the equation "x + 3 = 7" states that the value of the expression "x + 3" is equal to "7".

According to the given information:

For the following equation we have that,

⇒ - 8x < 32

⇒ -x < [tex]\frac{32}{8}[/tex]

⇒ -x < [tex]4[/tex]

⇒ x < [tex]- 4[/tex]

To know more about inequality visit:

https://brainly.com/question/30228778

#SPJ1

The difference between cardinality and join type is that cardinality describes the relationship between two data tables, while join type is the specific method used to combine the two tables.

Cardinality defines the maximum number of records that can exist in one table for a relationship with another table. Cardinality can be either one-to-one, one-to-many, or many-to-many.

A one-to-many cardinality relationship is when one record in one table can be related to multiple records in another table. For example, a customer can have multiple orders. In this situation, a one-to-one join type is often used because it is the most efficient way to retrieve the related data. This is because one-to-one join type only requires that one record be searched, while a one-to-many join type would require that multiple records be searched in order to find the related records. Additionally, a one-to-one join type ensures that no duplicate records will be returned in the result.

In summary, cardinality describes the relationship between two tables while join type is the specific method used to combine the two tables. A one-to-many cardinality relationship is when one record in one table can be related to multiple records in another table. To efficiently retrieve the related data, a one-to-one join type is often used. This is because it only requires that one record be searched and it ensures that no duplicate records will be returned in the result.

To know more about cardinality refer here:

https://brainly.com/question/29093097

#SPJ11

Therefore, the observed value of the test statistic for testing the null hypothesis H0: p = 0.5 versus the alternative hypothesis H1: [tex]p > 0.5[/tex]is z= 1.8. The correct answer is (e) z=[tex]0.59— 0.5/√0.5(0.5)/100.[/tex]

In this particular question, the observed value of the test statistic for testing the null hypothesis H0: p = 0.5 versus the alternative hypothesis H1: p > 0.5 is to be determined. The question provides a random sample of 100 likely voters in a small city, which produced 59 voters in favor of Candidate A. The formula for calculating the test statistic is as follows:

z= (p- P) / sqrt[P(1-P) / n]

where p is the sample proportion, P is the hypothesized population proportion, and n is the sample size.

Substituting the given values into the formula, we get:

z= [tex](0.59- 0.5) / sqrt[0.5(0.5) / 100][/tex]

z= [tex]0.09 / 0.05[/tex]

z=[tex]1.8[/tex]

for such more questions on statistics

https://brainly.com/question/15525560

#SPJ11

Justin's speed on his way to his parents' house was 42 mph. Therefore, his speed on his way back home was 18 mph slower, or 18 mph.

Let's use x mph to represent the pace at which Justin was travelling to his parents' house. Then, as he travelled 24 mph slower owing to the terrible weather, his speed on the way back would be (x - 24) mph.

By dividing the distance he drove by his speed, one may determine how long it took Justin to drive to his parents' house, or:

Time is a function of both speed and distance.

Similar to how long it would take Justin to drive back home:

Time is a function of distance and speed (x - 24)

Justin drove for a total of 12 hours, so we can construct the following equation:

420/x + 420/(x-24) = 12

By multiplying both sides of the equation by x(x-24), we may simplify the equation and find the value of x. After some algebraic fiddling, we arrive at:

[tex]x^2 - 24x - 840 = 0[/tex]

We can find the value of x by using the quadratic formula:

[tex]x = (24 +- \sqrt{(242 + 41840)}) / 2[/tex] or x = -18

We can determine that Justin was travelling at a speed of 42 mph as he made his way to his parents' home because the speed cannot be negative. Thus, he travelled at a speed of 18 mph less on the way back home.

We can confirm the following to see if the solution is accurate:

420/42 + 420/18 = 10 + 23.33 = 33.33

Justin did, in fact, drive for a total of 12 hours, proving that our answer is accurate.

Learn more about speed here:

https://brainly.com/question/30461913

#SPJ4

A pyramid with a base having n sides will have n + 1 faces, excluding the base. So, the pyramid that shares the same base as the prism will have 16 + 1 = 17 faces.

Let's say the base of the pyramid is a polygon with n sides. There are n faces in the pyramid (excluding the base), each of which is a triangle. Since there is just one base, the number of faces in the pyramid is n + 1.A prism is a polyhedron that is formed when two congruent polygons are joined by parallelograms. As a result, a prism with a polygon base has two polygons as bases and a number of rectangular faces equal to the number of sides of the polygon, which in this scenario is n.There are 2 bases and n rectangular faces in total for the prism. Since the number of edges in the prism is 99, we may express this as:Edges in prism = (Number of edges in each rectangular face × Number of rectangular faces) + (Number of edges in each base × Number of bases)= [tex]4n + 2n = 6n = 99n = 16.5[/tex] faces are in the pyramid = 16 + 1 = 17 faces.

for such more questions on congruent polygons

https://brainly.com/question/30274598

#SPJ11

The dimensions of the pool are either (21.55, 16.45) or (28.45, 7.55).

The perimeter of the bottom of a rectangular swimming pool is 60 meters, and the area is 221 square meters.

To find the dimensions of the pool, we can use the formula P = 2(l + w) where P is the perimeter and l and w are the length and width of the pool respectively. We can rearrange this formula to solve for either l or w, so we'll solve for l.

2(l + w) = 60
2l + 2w = 60
2l = 60 - 2w
l = (60 - 2w)/2

Now, we can use the formula A = l*w to solve for w.

221 = l*w
221 = (60 - 2w)/2 * w
221 = (60w - 2w^2)/2
442 = 60w - 2w^2
2w^2 - 60w + 442 = 0

Using the quadratic formula, we get w = 16.45 or 7.55.

Now that we know the width, we can use the formula l = (60 - 2w)/2 to find the length. For w = 16.45, l = 21.55, and for w = 7.55, l = 28.45.

Therefore, the dimensions of the pool are either (21.55, 16.45) or (28.45, 7.55).

To learn more about dimensions refer :

https://brainly.com/question/15225905

#SPJ11

Answer:

Step-by-step explanation:

3x^16

Answer:

3x^16

Step-by-step explanation:

Fatouma lifted 1 kg during the first week and 120 kg during the tenth week. Fatouma lifted 120 kg in 10 weeks, increasing by 2 kg each week.

Linear equations are the equations of degree 1. It is the equation for the straight line. The standard form of linear equation is ax+by+c =0, where a ≠ 0 and b ≠ 0

Say the mass Fatouma lifted during the first week "x". According to the problem, she increases the weight she lifts by 2 kg every week. So, the mass of second week is "x + 2" kg, during the third week is "x + 4" kg, and so on.

Since there are 10 weeks of training, the mass she lifted during the 10th week is:

x + (10 - 1) × 2 = x + 18

We also know that during the 10th week, she lifted 120 kg. So, we can set up an equation:

x + 18 = 120

Solving for x, we get:

x = 102

Thus, Fatouma lifted 102 kg during the first week of training.

To know more about linear equation visit :

brainly.com/question/11897796

#SPJ9

The experimental probability that Roberto will get a hit during his next time at bat is 0.25 or 25%.

The experimental probability of an event is calculated by dividing the number of times the event occurred by the total number of trials.

In this case, the event is "getting a hit" and the number of times it occurred is 11. The total number of trials is 44, which represents the number of times Roberto was at bat.

Experimental probability of getting a hit = Number of times Roberto got a hit / Total number of times at bat

Experimental probability of getting a hit = 11 / 44

Experimental probability of getting a hit = 0.25 or 25%

Therefore, the experimental probability that Roberto will get a hit during his next time at bat is 0.25 or 25%.

To learn more about probability Click here:
brainly.com/question/30034780

#SPJ4

The extraneous solution which arises when solving for the point of intersection of the line and the square root function is 20.

What is an extraneous solution?

An extraneous solution in mathematics is a solution that develops during the process of addressing the problem but is not a legitimate solution to the problem, such as the answer to an equation.

We are given two equations as f(x) = [tex]\frac{-1}{2}[/tex]x + 6 and f(x) = √x - 4.

Now, on equating both the equations, we get

⇒ [tex]\frac{-1}{2}[/tex]x + 6 = √x - 4

On squaring both sides, we get,

⇒ [tex](\frac{-1}{2}x + 6)^{2}[/tex]= x - 4

⇒ [tex]\frac{1}{4}x^{2}[/tex] + 36 - 6x = x - 4

⇒ [tex]\frac{1}{4}x^{2}[/tex] + 40 = 7x

⇒ [tex]\frac{1}{4}x^{2}[/tex] -7x + 40 = 0

⇒ [tex]x^{2}[/tex] -28x + 160 = 0

⇒ x = 20 , 8

For point of intersection, we will substitute x = 20 in both the equations.

So, we get

⇒ f(x) = [tex]\frac{-1}{2}[/tex] (20) + 6

⇒ f(x) = -10 + 6

⇒ f(x) = -4

Similarly,

⇒ f(x) = √20 - 4

⇒ f(x) = √16

⇒ f(x) = 4

Since both the solutions are not same so this is an extraneous solution.

Hence, the extraneous solution which arises is 10.

Learn more about extraneous solution from the given link

https://brainly.com/question/15395568

#SPJ1

New car prices to fall within is $18,300 - $41,900

Interval of prices would we expect at least 95% of new car prices to fall within Suppose that the average price for new cars has a mean of $30,100, a standard deviation of $5,600 and is normally distributed. Based on this information, the interval of prices that we would expect at least 95% of new car prices to fall within is $18,300 - $41,900.How to solve the problem? We know that the average price of new cars is $30,100 and the standard deviation is $5,600. The normal distribution has 95% of the data points within two standard deviations of the mean. Therefore, the interval of prices that we would expect at least 95% of new car prices to fall within is given by:Lower limit: $30,100 - 2 × $5,600 = $18,300Upper limit: $30,100 + 2 × $5,600 = $41,900Thus, the interval of prices that we would expect at least 95% of new car prices to fall within is $18,300 - $41,900.

Learn more about Standard deviation

brainly.com/question/23907081

#SPJ11

Answer:

19. sqrt{305}

20. 3*sqrt{7}

Step-by-step explanation:

You use the Pythagorean theorem, which can be applied to right triangles. It states that x^2+y^2 = hypotenuse ^2, where x and y are the two sides other than the hypotenuse.

Step-by-step explanation:

hope this will gel help u

The given diagram represents a right circular cylinder with a base equation of (x - 0)² + (y - 0)² = 7², resulting in an ellipse with an equation of (x - 0)²/4² + (y - 0)²/5² = 1.

The given diagram represents a right circular cylinder with a height of 10 meters and a radius of 7 meters, which means the base of the cylinder is a circle with a radius of 7 meters. The equation of the circle is (x - 0)² + (y - 0)² = 7², where (0, 0) is the center of the circle.

The cylinder has been sliced by a plane that is parallel to the base and 4 meters from the center of the cylinder. This means the distance between the center of the cylinder and the plane is 4 meters.

Mathematically, the equation of the ellipse can be written as (x - 0)²/4² + (y - 0)²/5² = 1, where the center of the ellipse is (0, 0), and the semi-major axis is 5 meters and the semi-minor axis is 4 meters.

So, the given diagram described as a right circular cylinder with a base equation of (x - 0)² + (y - 0)² = 7², sliced by a plane parallel to the base and 4 meters from the center of the cylinder, resulting in an ellipse with an equation of (x - 0)²/4² + (y - 0)²/5² = 1.

To learn more about cylinder please click on below link        

https://brainly.com/question/3216899

#SPJ1

Answer:

  60.3°

Step-by-step explanation:

You want the measure of angle B in right triangle ABC with leg BC = 8 and leg AC = 14.

The tangent relation is ...

  Tan = Opposite/Adjacent

Applying this to the given triangle, we have ...

  tan(B) = 14/8

The arctangent function gives you the angle from the tangent.

  B = arctan(14/8) ≈ 60.3°

The measure of angle B is about 60.3°.

<95141404393>

Answer:

8

Step-by-step explanation:

The box contains a total of 4 x 12 = 48 eggs.

If we arrange these eggs in 6 rows, we need to divide the total number of eggs by 6:

48 ÷ 6 = 8

Therefore, there will be 8 eggs in each row.

Answer:

no the didn't hear the question

Answer:

I am pretty sure the answer is that the question can't be heard

Step-by-step explanation:

A shape's perimeter is calculated by adding the lengths of all of its sides and edges. The V's direction is [tex](-5, -12)[/tex]  .

The complete length of a shape's boundary is referred to as the perimeter in geometry. Its dimensions are expressed in linear units like centimetres, metres, inches, and feet.

We need to know the lengths of all the sides of Fard ZH in order to calculate its perimeter. We can see from the diagram that  [tex]ZF = ZD + DF = 24 + 28 = 52[/tex]  and [tex]FH = ZG = 30 and ZH = 36.[/tex]

As a result, Fard ZH's perimeter is as follows:

perimeter = [tex]= ZF + FH + ZH + ZG[/tex]

perimeter  [tex]= 52 + 30 + 36 + 30[/tex]

perimeter  [tex]= 148[/tex]

So the perimeter of Fard ZH is [tex]148[/tex]  .

(3) The vector that connects points A and B must be identified in order to determine the direction of V, and it can be written as follows:

[tex]V = (xB - xA, yB - yA)[/tex]

Where xA and yA represent point A's x and y coordinates, and xB and yB represent point B's x and y coordinates.

Plugging in the given values, we get:

[tex]V = (5 - 10, 2 - 14)[/tex]

[tex]V = (-5, -12)[/tex]

Therefore, The V's direction is [tex](-5, -12)[/tex] .

Learn more about dimension here:

https://brainly.com/question/28688567

#SPJ1

The propensity scoring method is a statistical technique used to adjust for differences in the characteristics of groups being compared in a study. In this case, we want to adjust for the fact that respondents aged 70 or older are underrepresented in an internet sample.

To do this, we can assign a propensity score to each individual in the sample based on their likelihood of being in the sample, given their age. We can then use this score to weight their responses to account for the underrepresentation of older individuals.

In this case, we know that respondents aged 70 or older are only one-third as likely to be in an internet sample as their actual incidence in the population. This means that we can assign a propensity score of 3 to each individual aged 70 or older in the sample, and a propensity score of 1 to everyone else.

Using these propensity scores, we can weight the responses of each individual in the sample. Responses from individuals with a propensity score of 3 would be weighted by a factor of 3, while responses from individuals with a propensity score of 1 would be weighted by a factor of 1.

By adjusting for the underrepresentation of older individuals in this way, we can obtain more accurate estimates of the characteristics of the population being studied, and reduce the potential for bias in our analysis.

For more details about propensity click here:

https://brainly.com/question/28766632#

#SPJ11

To make a stable structure, the method of joints can be used to calculate the force BD in the truss shown.

This method uses the equations of equilibrium to determine the forces in the members of a truss. To calculate the force BD, one needs to sum the moments about point A and equate them to zero.

The moment is given by M = FxD, where F is the force, and D is the perpendicular distance from the point of interest to the line of action of the force. Therefore, the force BD can be calculated using the equation:

MAB = 0 = (BD)(2) - (AE)(5)

BD = 5AE/2

To find the forces in members CD and CE using the method of sections, one needs to cut through the truss along a line passing through points C and E.

Then, the force in member CD can be found by using the equation of equilibrium, where the sum of the forces in the x-direction and the sum of the forces in the y-direction must be equal to zero. Similarly, the force in member CE can also be calculated using the same method.

To learn more about joints, refer below:

https://brainly.com/question/13441222

#SPJ11

Answer:

Step-by-step explanation:

You want the remainder of a number when divided by 3 if (1) the sum of digits is 5, and (2) the remainder from division by 9 is 5.

The sum of digits of a 2-digit number will be 5 if that number is one of ...

  {14, 23, 32, 41, 50}

In every case, the remainder when divided by 3 is 2. Effectively, it is the remainder of 5 when that is divided by 2.

In addition to the numbers listed above, 2-digit numbers with a sum of digits of 14 will also have a remainder of 5 when divided by 9. This adds five more numbers to the list:

  {59, 68, 77, 86, 95} . . . . have remainders of 5 when divided by 9

The remainders when divided by 3 are all 2 for these numbers as well.

__

Additional comment

The process of (recursively) summing the digits of a positive integer is called "casting out 9s". It effectively finds the modulo 9 value of the number, with the exception that a sum of 9 corresponds to a modulo 9 value of 0.

Since 9 is divisible by 3, the modulo 3 value of a number will be the modulo 3 value of the modulo 9 value. In other words, if the sum of digits is 5, or the remainder from division by 9 is 5, then the mod 3 value is 5 mod 3 = 2.

when the distance between the top of the rod and the foot of the wall is 152 inches, the distance between the bottom of the rod and the foot of the wall is decreasing at a rate of approximately 19.08 inches per second.

In this case, we are given that the distance between the top of the rod and the foot of the wall is decreasing at a rate of 9 inches per second. We want to find the rate at which the distance between the bottom of the rod and the foot of the wall is changing.

We can start by using the Pythagorean theorem to relate the three distances involved: the height of the rod (h), the distance between the top of the rod and the foot of the wall (x), and the distance between the bottom of the rod and the foot of the wall (y). Specifically, we have:

[tex]h^2 = x^2 + y^2[/tex]

To find the rate at which y is changing, we can take the derivative of both sides of this equation with respect to time (t), using the chain rule:

2h dh/dt = 2x dx/dt + 2y dy/dt

We are given that dh/dt = -9 inches per second (since h is decreasing). We also know that h = 172 inches and x = 152 inches (when y = 0). Substituting these values and solving for dy/dt, we get:

dy/dt = (h/x) * (dx/dt - (x/y) * dh/dt)

dy/dt = (172/152) * (-9 - (152/y) * 9)

dy/dt = -19.08 inches per second (rounded to two decimal places)

Find out more about Pythagorean theorem

brainly.com/question/15175162

#SPJ4

The probability that a class of 36 has an average midterm mark that is more than 77.83 is 0.0766. This is because the mean of the normally distributed marks is 78 and the standard deviation is 6. Using the standard normal distribution formula, we can calculate the probability that the average mark of 36 students is more than 77.83.

Standard Normal Distribution Formula: P(x > a) = 1 - P(x < a)

P(x > 77.83) = 1 - P(x < 77.83)

P(x > 77.83) = 1 - 0.9234

P(x > 77.83) = 0.0766

The propensity scoring method is a statistical technique used to adjust for differences in the characteristics of groups being compared in a study. In this case, we want to adjust for the fact that respondents aged 70 or older are underrepresented in an internet sample.

To do this, we can assign a propensity score to each individual in the sample based on their likelihood of being in the sample, given their age. We can then use this score to weight their responses to account for the underrepresentation of older individuals.

In this case, we know that respondents aged 70 or older are only one-third as likely to be in an internet sample as their actual incidence in the population. This means that we can assign a propensity score of 3 to each individual aged 70 or older in the sample, and a propensity score of 1 to everyone else.

Using these propensity scores, we can weight the responses of each individual in the sample. Responses from individuals with a propensity score of 3 would be weighted by a factor of 3, while responses from individuals with a propensity score of 1 would be weighted by a factor of 1.

By adjusting for the underrepresentation of older individuals in this way, we can obtain more accurate estimates of the characteristics of the population being studied, and reduce the potential for bias in our analysis.

For more details about propensity click here:

https://brainly.com/question/28766632#

#SPJ11

The true statements for the graph of y=(x+2)²2+4 are:, The vertex of the parabola is at the point (-2, 4)., The graph opens upwards, since the coefficient of the squared term is positive., The y-intercept of the graph is at the point (0, 9)., The x-coordinate of the vertex is -2, which is also the axis of symmetry of the parabola., The graph is a parabola, which is a U-shaped curve.

What is graph?

In mathematics, a graph is a visual representation of a set of points, called vertices or nodes, that are connected by lines or curves, called edges. Graphs are used to model relationships between objects or to represent data in a visual way.

In the context of coordinate geometry, a graph is a visual representation of a function or relation, which shows the relationship between the input values (x-axis) and output values (y-axis). The graph is typically a set of points plotted on a Cartesian plane, where each point represents a unique input-output pair.

To know more about Graph related questions, visit:

https://brainly.com/question/17267403

#SPJ1

Complete Question:

Select the statements that are true for the graph of y = (x+2)²2 + 4.

a) The vertex of the parabola is (-2, 4).

b) The parabola opens upward.

c) The y-intercept of the parabola is 4.

d) The x-intercepts of the parabola are (-4, 0) and (0, 0).

e) The axis of symmetry of the parabola is a vertical line through x = -2.

There are 52 weeks of data included in this frequency distribution.

The given frequency distribution displays the weekly sales of a certain brand of television at an electronics store.

We need to find the number of weeks of data included in this frequency distribution.From the given data, we can see that the frequency column represents the number of televisions sold per week.

To find the number of weeks of data included, we need to sum up the frequency column. Summing up the frequency column gives us:12 + 5 + 5 + 5 + 25 = 52

Therefore, there are 52 weeks of data included in this frequency distribution.

The given frequency distribution displays the weekly sales of a certain brand of television at an electronics store. We need to find the number of weeks of data included in this frequency distribution.

From the given data, we can see that the frequency column represents the number of televisions sold per week. To find the number of weeks of data included, we need to sum up the frequency column. Summing up the frequency column gives us:

12 + 5 + 5 + 5 + 25 = 52

To know more about frequency distribution click on below link:

https://brainly.com/question/14926605#

#SPJ11

5.4 out of the 12 adult Australian sheep dogs in the sample weigh 65 pounds or more, on average.

We can start by calculating the likelihood that a single adult Australian sheep dog weighs 65 pounds or more using the provided estimate of 45%. If p represents the percentage of adult dogs weighing 65 pounds or more, the following is the result:

p = 0.45

Next, we may calculate the median number of dogs weighing 65 pounds or more using the sample size of 12. If X represents the proportion of dogs in the sample that weigh 65 pounds or more, X will follow a binomial distribution with n = 12 and p = 0.45 as its parameters.

The formula for X's mean or expected value is:

E(X) = np

When we change the values of n and p, we obtain:

E(X) = 12(0.45) = 5.4

Learn more about sample here:

https://brainly.com/question/15659544

#SPJ4