the ionosphere (or thermosphere) is really far out there! it is home to which of the following? select all that apply.

Answers

Answer 1

The ionosphere is the home of all charged particles in the earth's atmosphere, as well as some of the satellites that we launch.

The ionosphere of Earth extends from the top of the atmosphere to the very edge of space. The Sun heats the gases until they lose an electron or two, resulting in a sea of electrically charged particles.

The ionosphere extends 50 to 400 miles above the Earth's surface, right on the edge of space. The ionosphere, along with the neutral upper atmosphere, forms the boundary between Earth's lower atmosphere — where we live and breathe — and space.

This space boundary is right where many of our Earth-orbiting satellites, including the International Space Station, are located. This means that these satellites can be affected by the ionosphere's constantly changing conditions, such as sudden swells of charged particles that increase drag on satellites and shorten their orbital lifetimes, or how long they can orbit Earth.

Learn more about satellites here:

https://brainly.com/question/2522613

#SPJ4


Related Questions

how far must the stone fall so that the pulley has 4.30 j of kinetic energy? express your answer numerically in meters to three significant figures.

Answers

To calculate the distance first you have to find the angular velocity of the pulley with the formula K.E = 1/2 I ω² using the given value of kinetic energy. Then, also find the potential energy loss of the stone and then the distance.

Since the system here is released from rest, therefore there will be loss in potential energy of the system and gain in its kinetic energy.

Therefore,

Loss in potential energy = gain in (kinetic energy of the pulley + kinetic energy of the stone)

Using the given mass of the pulley disk, find its moment of Inertia.

Inertia (I) = 1/2 mass x radius²

Then, find the angular velocity of the pulley,

K.E = 1/2 I ω²

Finally, find the total kinetic energy of the system by dividing the two fractions of the pulley's kinetic energies .

Learn more about moment of inertia here:

https://brainly.com/question/15246709

#SPJ4

two charged particles, one q and the other q, are held fixed a certain distance, 2d, apart. find the electric field at point p. for the coordinate system, take x to be to the right and y to be up

Answers

The vector sum of the electric fields resulting from each of the two charges at point P is the electric field. The field owing to q will point to the right, whereas the field due to -q will point to the left. As a result, the net electric field at point P is zero.

An electric field is a physical field that surrounds electrically charged particles and acts as an attractor or repellent to all other charged particles in the vicinity. It can also refer to a system of charged particles' physical field. The force per unit charge exerted on a positive test charge that is at rest at a given position is the force per unit charge that is used to define the electric field analytically. Electric charge or magnetic fields with variable amplitudes can produce an electric field. The area of space surrounding an electrically charged particle or object in which the charge body perceives force is known as the electric field.

learn more about electric field here:

https://brainly.com/question/8971780

#SPJ4

Classify each of the following failures by identifying its category in Fig. 1.1, and explain the reasons for each choice in one or two sentences: (a) The plastic frames on eyeglasses gradually spread and become loose. (b) A glass bowl with a small crack breaks into two pieces when it is immersed, while still hot, into cold water (c) Plastic scissors develop a small crack just in front of one of the finger rings (d) A copper water pipe freezes and develops a lengthwise split that causes a leak (e) The steel radiator fan blades in an automobile develop small cracks near the base of the blades

Answers

We classified each of the following failures by identifying its category in the Figure shown:

Plastic eyeglass frames gradually stretch and loosen. This is an example of creep failure.A glass bowl with a small crack breaks into two pieces when immersed, still hot, in cold water. This is an example of thermal shock failure.A plastic scissors has a small crack just in front of one of the finger rings. This is an example of fatigue failure.A copper water pipe freezes and develops a longitudinal crack that causes a leak. This is an example of brittle fracture.The steel fan blades on the radiator fan are leaking. This is an example of creep failure.

Explanation of each of the failures of the mentioned materials:

This is an example of creep failure, which occurs when a material is subjected to constant stress over time and causes it to deform. Plastic eyeglass frames stretch and loosen due to constant stress from wearing them. This is an example of thermal shock failure, which occurs when a material is subjected to a sudden change in temperature, causing it to crack or break. The glass bowl broke in two when immersed in cold water while it was still hot. This is an example of fatigue failure, which occurs when a material is subjected to repeated cycles of stress, causing it to eventually crack or break. The plastic scissors developed a small crack due to repeated stress from use. This is an example of brittle fracture, which occurs when a material is subjected to high stress and fractures without any significant deformation. The copper water pipe froze and split longitudinally due to the high stress from the freezing temperatures. This is an example of creep failure, which occurs when a material is subjected to constant stress over time and causes it to deform. Steel radiator fan blades developed small cracks due to the constant stress of being used while an automobile develops small cracks near the base of the blades.

Learn more about material failures:

https://brainly.com/question/530489

7#SPJ4

a wire loop is in a uniform magnetic field. current flows in the wire loop, as shown. what does the loop do?

Answers

The ring has a magnetic field travelling across it because of current I. The magnetic field as the paper goes through the ring is perpendicular to the internal plane, according to the right-hand thumb rule.

In proportion to a drop in the current I flowing from B to A, the magnetic field across the ring and magnetic flux both decrease. According to Lenz's law, the magnetic flux fluctuation is opposed by the current that is induced in the rings. This shows that the magnetic field produced by the induced current and the current I both point in the same general direction. The induced current in the ring is therefore flowing clockwise.

Learn more about magnetic field here

https://brainly.com/question/23096032

#SPJ4

determine the moment of the couple formed by the two forces by resolving each force into horizontal and vertical components and adding the moments of the two resulting couples

Answers

The required moments of the resulting two couples is calculated to be 16.39 Nm.

Forces acting are two 60N forces

A and C are the corners of a 200-mm square plate

The equation for AC is given as(AC forms a hypotenuse, with two similar sides),

AC = √0.2²+0.2² = 0.2√2 m

sin75° = d/AC

d = 0.2√2 sin75° = 0.2732 m

m Fm = Fm × 0.2

m Fm = -30 V₃ 0.2

m Fm = -6 V₃

m Fv = -6 Nm

So, m = 16.39 Nm (clockwise)

Thus, the required moments of the resulting two couples is calculated to be 16.39 Nm.

The given question is incomplete. The complete question is 'Two parallel 60-N forces are applied as shown to the corners A and C of a 200-mm square plate.'

To know more about moments:

https://brainly.com/question/24551104

#SPJ4

An inclined track is secured to a table. The height of the highest point of the above the tabletop is h1. The height from the tabletop to the floor is h2. A block of as M is released from rest and slides down the track such that all the frictional forces are considered negligible. The block leaves the track horizontally and strikes the ground at a distance D. Which of the following statements is correct about the scenario? Select two answers.
answer choices
the total mechanical energy of the system containing only the block increases from the moment of release to the moment it hits the ground.
the total mechanical energy of the system containing only the black remains constant
the total mechanical energy of the block-earth system remains constant
the total mechanical energy of the block-earth system increases from the moment of release to the moment it hits the ground.

Answers

The total mechanical energy of the block-earth system remains constant, and the total mechanical energy of the system containing only the block increases from the moment of release to the moment it hits the ground.

What is mechanical energy?

Mechanical energy is energy associated with the motion and position of an object. It is the sum of both the kinetic energy, which is energy associated with the object's motion, and the potential energy, which is energy associated with the object's position. Mechanical energy is present in a variety of forms, including kinetic energy, potential energy, heat, and elastic energy. Mechanical energy is converted into other forms of energy, such as thermal energy, electrical energy, and chemical energy. Mechanical energy can be used to do work, such as turning a crank to lift a heavy object, and can be harnessed to power machines and devices. Mechanical energy is an important concept in physics and engineering, as it can be used to analyze the motion and behavior of objects, and to develop solutions to problems.

To learn more about mechanical energy
https://brainly.com/question/28154924
#SPJ4

A helium balloon has a volume of 2.00 L at 101 kPa. As the balloon rises the pressure drops to 97.0 kPa. What is the new volume?

Answers

Answer:

The volume of a gas is inversely proportional to the pressure at constant temperature, according to Boyle's law. Mathematically, it can be expressed as PV = nRT, where P is the pressure, V is the volume, n is the number of moles, R is the ideal gas constant, and T is the temperature.

As the temperature is constant, we can use the following formula to calculate the new volume of the balloon:

V1 / P1 = V2 / P2

where V1 = 2.00 L, P1 = 101 kPa, P2 = 97.0 kPa.

V2 = (V1 * P2) / P1

V2 = (2.00 L * 97.0 kPa) / 101 kPa = 1.9608 L

So, the new volume of the helium balloon is 1.9608 L.

If a laborer weighing 895N and carrying bricks weighing 575N to scaffold up a ladder 3.1 m above the ground how much work has he done? If he climbed the ladder in 12.0 seconds what was his power output?show your work

Answers

If he climbed the ladder in 12.0 seconds, the laborer's power output is 394.875 watts.

What is work?

Work is the product of force and distance and is measured in Joules (J). In physics, work is the energy transferred to or from object via application of force along a displacement.

As, work = force x distance x cos(theta)

So, the work done by the laborer would be:

work = (895 N + 575 N) x 3.1 m x 1 = 4738.5 J

As, power = work / time

where time is measured in seconds.

power = 4738.5 J / 12.0 s = 394.875 W

So, the laborer's power output is 394.875 watts.

To know more about work done, refer

https://brainly.com/question/25573309

#SPJ1

A student must conduct an experiment to verify the conservation of momentum for a closed two-cart system. Cart X and cart Y travel toward each other and eventually collide. The student has determined the following procedure.
Step 1: Measure the mass of cart X and cart Y with a balance.
Step 2: Use a motion sensor to record data of the velocity of each cart before, during, and after the collision.
Step 3: Use the data and ∑pf = ∑p0 to determine if the right-hand side of the equation is equal to the left-hand side of the equation.
Which of the following steps should the student add to the procedure so that the conservation of momentum can be experimentally verified?
answer choices
Conduct the experiment on a smooth, level surface.
Attach adhesive strips to each cart so that they stick together after they collide.
Ensure that the mass of each cart is the same.
Ensure that the initial speed of each cart is the same.

Answers

The surfaces should be frictionless . The vector sum of the momenta should be compared, because momentum is a vector quantity.

Define conservation of momentum ?

The law of conservation of momentum states that in an isolated system the total momentum of two or more bodies acting upon each other remains constant unless an external force is applied. Therefore, momentum can neither be created nor destroyed.

The principle of conservation of momentum states that if two objects collide, then the total momentum before and after the collision will be the same if there is no external force acting on the colliding objects.

Every moving object has momentum, and momentum is defined as the product of an object's mass and its velocity. As an equation, this can be written as p=mv p = m v , where p represents the momentum.

To learn more about momentum refers to:

https://brainly.com/question/1042017

#SPJ4

1. How much force is required to
accelerate a 795 kg car by 15 m/s2?

Answers

Answer: 11925 N

Explanation:   It's a very simple question.

According to Newton's 2nd law,

The acceleration of an object as produced by a net force is directly proportional to the magnitude of the net force, in the same direction as the net force, and inversely proportional to the mass of the object.

             F=ma

where m = mass of an object

           a= acceleration

F = 795*15

  =11925 N

Read more about it:

https://brainly.com/question/15251816

positive charge is distributed uniformly on a plastic rod bent to form a quarter-circular arc (figure 1). figure1 of 1 a positively charged rod is bent so that it forms a concave rightward arc symmetrical about a horizontal dashed line going through the center of the rod. the center of curvature of the bent rod is marked with a black dot. part a what is the direction of the electric field at the center of the circle?

Answers

Radial direction of the electric field at the center of the circle.

What are Electric field?

Take into consideration the little equivalent arc elements on either side of the horizontal first. Now determine the electric field they caused, how to fix it, and how to eliminate the ones that were directed in the other direction. Now, swap out the common expression for the electric field caused by charge density, integrate over the arc's length, and you'll get the necessary electric field.

The physical field that surrounds electrically charged particles and exerts force on all other charged particles in the field, either attracting or repelling them, is known as an electric field (also known as an E-field.

It can also refer to a system of charged particles' physical field.  Electric charges and time-varying electric currents are the building blocks of electric fields.

Learn more about Electric field here: https://brainly.com/question/19878202

#SPJ4

a car burns fuel with a density of 700 kg/m3 under atmospheric conditions that produce an air density of 1.2 kg/m3. the car has a fuel rating of 36 mpg (miles per gallon) at a speed of 60 mph (miles per hour) and a frontal cross-section of 4.5 feet by 2.5 feet. 1. calculate

Answers

The drag coefficient of the car is calculated as equal to 0.0947.

What is drag coefficient ?

A dimensionless quantity that is used to quantify the drag or resistance of an object in a fluid environment, such as air or water is called drag coefficient.

60 mph = 26.8 m/s

1 mpg = 0.425144 liters/kilometer

36 mpg = 15.60512 liters/kilometer

4.5 ft * 2.5 ft = 11.25 ft^2 = 1.042 m^2

The drag force can be calculated as:

Fd = 0.5 * Cd * A * r * v^2

where, Cd = drag coefficient (unitless), A = frontal area of the car (m^2), r = air density (kg/m^3), v = velocity of the car (m/s)

So, Fd = (15.60512 liters/kilometer) * 4.5 kg/liter / (3600 sec/hour) = 0.0066 N

Cd = Fd / (0.5 * A * r * v^2)

Cd = 0.0066 N / (0.5 * 1.042 m^2 * 1.2 kg/m^3 * 26.8 m/s^2) = 0.0947

The drag coefficient of the car is 0.0947.

To know more about drag coefficient, refer

https://brainly.com/question/23942493

#SPJ4

Note: The question given on the portal is incomplete. here is the complete question.

Question: A car burns fuel with a density of 700 kg/m3 under atmospheric conditions that produce an air density of 1.2 kg/m3. the car has a fuel rating of 36 mpg (miles per gallon) at a speed of 60 mph (miles per hour) and a frontal cross-section of 4.5 feet by 2.5 feet. 1. calculate the drag coefficient of the car.

a 56-kg pole vaulter running at 11 m/s vaults over the bar. her speed when she is above the bar is 1.4 m/s. neglect air resistance, as well as any energy absorbed by the pole, and determine her altitude as she crosses the bar.

Answers

The altitude of the pole vaulter as she crosses the bar would be 6.1 meter due to energy conservation.

The energy is the first one, but when you jump you're in the air, so you have potential energy due to gravity, and kinetic energy because you're still moving in 1.4 m/s.

Using conservation of energy,

KEi+ PEi = PEf+ KEf

PE = mgh

KE = 0.5mv²

Now, m= 56 kg v= 1.4 m/s

so solving,

h= 6.1 meter

So, The altitude of the pole vaulter as she crosses the bar would be 6.1 meter due to energy conservation.

Learn more about Energy

brainly.com/question/24324075

#SPJ4

determine the work required to deflect a linear spring with a spring constant of 70 kn/m by 20 cm from its rest position. (5points)

Answers

The work required to deflect a linear spring by 20 cm from its rest position with a spring constant of 70 kn/m is 1.4 KJ.

What is spring constant?

spring constants (physics) A spring property defined as the ratio of the force acting on the spring to the displacement induced by it. Hooke's Law states that as a spring is extended, the force exerted is proportional to the increase in length from the equilibrium length. F represents the force, while x represents the change in spring length. The spring constant is the proportional constant k. It is a measure of the stiffness of the spring. When a spring is stretched or compressed by an amount x from its equilibrium length, it produces a force F = -kx in the direction of its equilibrium position.

Here,

spring constant=70 KN/m

d=0.2 m

W=kx²/2

=70*10^3(0.2²)/2

=1.4 KJ

The work required to deflect a linear spring with a spring constant of 70 kn/m by 20 cm from its rest position is 1.4 KJ.

To know more about spring constant,

https://brainly.com/question/14159361

#SPJ4

the froude number, fr, is a dimensionless value that describes different flow regimes of open channel flow. if it depends on velocity v , gravitational constant g, and length l, use buckingham pi theorem to show.T/F

Answers

False. Buckingham Pi theorem states that if a physical relationship involves a certain number of independent variables, then the relationship can be written as a product of powers of a certain number of dimensionless groups.

What is Buckingham Pi theorem?

Buckingham Pi theorem is a mathematical theorem that states that any physical system can be expressed as a combination of an appropriate number of variables, together with the appropriate number of independent dimensionless parameters. The theorem was developed by Edward Buckingham in 1914 and is considered to be the most general form of dimensional analysis.

The Froude number does not depend on the independent variables mentioned (velocity, gravitational constant, and length) so Buckingham Pi theorem is not applicable.

To learn more about Buckingham Pi theorem
https://brainly.com/question/1601401
#SPJ4

what two quantities could be graphed to yield a straight line whose slope could be used to calculate a numerical value for the mass of the cart?

Answers

Railway tracks or the freeway quantities could be graphed to yield a straight line whose slope could be used to calculate a numerical value for the mass of the cart.

What is Slope ?

A line's slope is how steeply it slopes from LEFT to RIGHT. The slope of a line is determined by dividing its rise, or vertical change, by its run, or horizontal change. When you know the slope of the line to be investigated and the given point is also the y intercept, you can utilise the slope intercept formula, y = mx + b. (0, b). The y value of the y intercept point is denoted by the symbol b in the formula. According to linguists, the Middle English adverb aslope, which meaning "at an angle," is where the term slope is said to have originated. You can use the word's noun form to describe things that are sloped or at an angle, such as a steep hill or a ramp.

Learn more about the Slope here: https://brainly.com/question/27847091

#SPJ4

Two small identical conducting spheres are placed with their centers 0.30m apart. One is given a charge of 12 X 10^-9C, the other a charge of -18 X 10^-9C.
a.Find the electrostatic force exerted on one sphere by the other.
b. The spheres are connected by a conducting wire. Find the electrostatic force between the two after equilibrium is reached, where both spheres have the same charge.

Answers

a. 12*10^-5 N attractive is the force exerted on one sphere by the other.   b. 9*10^-7 N repulsive is the force between the two after equilibrium is reached, where both spheres have the same charge.

The force between two charged particles is calculated as

F= q1*q2*K/r^2 .......................(i)

where q1 is the charge of the first body, q2 is the charge of the second body and r is the distance between them Here K is a constant that has the values of 9*10^9.

So for the finding a.

12 X 10^-9* -18 X 10^-9*9*10^9/(o.3)^2 ............ From ( i)

9*12*18*10^-9/0.09 which results to 12*10^-5 N

And Similarly for b we need to find the total average charge of both bodies will be.

(q1+q2)/2 ......(ii)    (12 - 18)/2 => -6/2 = -3 nC .................( from ii)

and using (i)    (3X10^-9)^2*9*10^9/ (o.3)^2 ...... (As q1 =q2)

which results in 9*10^-7 N

Learn More about Electric Force:https://brainly.com/question/17692887

#SPJ4

7. object has a mass of and is moving in the direction. it collides with object , which has a mass of 2 and is initially at rest. after the collision, object has a final velocity of in the direction. which of the following best describes the impulse object exerts on object during the collision? -2MV - Mv 0 +Mv E +2Mv

Answers

-2Mv best describes the impulse object exerts on object during the collision.

In physics, collision, which is also known as impact can be explained as the abrupt, powerful coming together in close proximity of two bodies, such as two pool cues, a golf club and a ball, a hammer.

Accidents can be generally defined as the following: A collision which occurs whenever two vehicles collide violently.

First collision is literally defined as the impact that a car suffers when it hits another object, and second collision is the impact suffered by the occupant, or occupants, of a crashed car, against the impacted car. Given the information on the question, that would be a first collision.

2Mv Mv +Mv +2Mv

2Mv Mv = Mv -2Mv

2(Mv)= Mv

Mv= -2Mv

-2Mv

Learn more about collision here:

brainly.com/question/13138178

#SPJ4

In professional football some players have microphones in their helmets that allow them to communicate with coaches on the sideline what is this indicate

Answers

The involvement of microphones in the helmet of some professional football players for the purpose of communication shows that there is an immense advancement in technology.

What are microphones?

A microphone is defined as a device that is can be used to magnify a sound through its conversation to electrical signals.

Professional football is a type of game that is played by train individuals and it's made up of two teams that plays against each other.

The introduction of microphones in the helmet of these footballer helps them to effectively communicate with their coaches near by which was not soo years back.

Therefore this can be said to be an advancement in technology.

Learn more about microphones here:

https://brainly.com/question/28085245

#SPJ1

A fish in a lake looks up at the

surface of the water. At what

distance d along the surface,

measured from the normal, is

a water-skimming insect safe

from the roving eye of the

fish?

Answers

the distance traveld by a body fallling freely from rest in one,two and three seconds are in the range of the object is equal

which of the following diagrams represents the equipotential curves in the region between a positive point charge and a negatively charged metal plate?

Answers

These lines, which are also known as electric field lines, point in the direction that a positive test charge would accelerate if it were placed along the line.

Is there a positive to negative transition in the electric field lines?The direction of an electric field line is always away from a positive charge and in the direction of a negative charge. In actuality, positive and negative charges are where electric fields begin and end.These lines, which are also known as electric field lines, point in the direction that a positive test charge would accelerate if it were placed along the line. As a result, the lines are pointed in the opposite direction of positively charged source charges—that is, toward negatively charged source charges.These lines, which are also known as electric field lines, point in the direction that a positive test charge would accelerate if it were placed along the line.              

To learn more about electric field refer to:

https://brainly.com/question/28027633

#SPJ4

given two strings s and t, both consisting of lowercase english letters and digits, your task is to calculate how many ways exactly one digit could be removed from one of the strings so that s is lexicographically smaller than t after the removal. note that we are removing only a single instance of a single digit, rather than all instances (eg: removing 1 from the string a11b1c could result in a1b1c or a11bc, but not abc).

Answers

I came up with this test case myself. If s = '3ab' and t = 'cd', return 1. If s = '123ab' and t = '423cd', return 6.

What are lexicograph?

The study of lexicons is called lexicography, and it is separated into two distinct academic fields. It involves the creation of dictionaries. [1]

The process of compiling, writing, and editing dictionaries is known as practical lexicography.

Theoretical lexicography is the academic study of the semantic, orthographic, syntactic, and paradigmatic characteristics of the lexicon (vocabulary) of a language. It also develops theories of the elements and structures of dictionaries that connect the data in dictionaries, the information needs of users in various contexts, and the most effective ways for users to access the data included in printed and electronic dictionaries. This practise is sometimes known as "metalexicography."

On what defines lexicology as different from lexicography, there is some debate. Some people use the term "lexicology" to refer to theoretical lexicography, whereas others do not.

Learn more about lexicograph here: https://brainly.com/question/27893282

#SPJ4

Can anyone help me answer this question?
Find the mass of an object whose density is 250 kg / cm^3 and volume is 2000 mm^3.

Answers

The Mass of the object is 500kg have a density of 250 kg/cm³.

What is Density?

Mass per unit of volume is referred to as density, volumetric mass density, or specific mass. The Latin sign D may also be used, however, the Greek letter rho is more frequently employed to represent density. Mass divided by volume is the mathematical formula for density.

Although this is technically incorrect, density is generally described as a substance's weight divided by its volume. The term "specific weight" is more accurate.

The density and mass concentration of a pure substance is numerically equivalent. Density can affect buoyancy, purity, and packing. Varied materials typically have different densities. At normal temperatures and pressures, osmium and iridium have the highest densities of any known elements.

Volume = 2000mm³ = 2cm³

Density = Mass / Volume

250 = Mass/ 2

mass = 500kg

Hence, the mass will be 500kg.

To learn more about Density  from the given link

https://brainly.com/question/29775886

#SPJ1

a black mamba snake has a length of 2.60 m and a top speed of 4.50 m/s. suppose a mongoose and a black mamba find themselves nose to nose. in an effort to escape, the snake accelerates past the mongoose at 8.37 m/s2 from rest.

Answers

The snake takes 0.53 seconds to reach its top speed.

Speed is defined as: The rate of change of the object's position in any direction. Speed ​​is measured as the ratio of distance traveled and time traveled. In physics, an equation of motion is an equation that describes the behavior of a physical system related to motion as a function of time..

We know the snake's initial speed (zero) and its final speed (4.50 m/s). Also, its acceleration is 8.37 m/s2

The relevant equation is:  

v = v0 + at

4.50 = 0 + 8.37t

0.53 s = t

Learn more about Speed

brainly.com/question/13263542

#SPJ4

a brick 20cm long 10cm wide and 2cm thick has a mass of 5kg . determine the . Maximum pressure that can be exerted by the brick on a flat surface​

Answers

Hence the maximum pressure exerted by the brick is 2450 dyne/cm²

Given the mass of the brick=5kg

Dimension of  the brick=20cm*10cm*2cm.

So weight of the brick= F= mg

Where f= force on the body due to gravity

where m= mass, g= gravity.

So F= 5000*9.8

by doing the multiplication we get the result as

F= 49000 dyne where dyne is unit of force

Where surface area is 10cm*2cm is in contact with the ground then

Area= (10*2)= 20cm²

Applying pressure formula = F/Area= 49000/20

By dividing we get the answer as= 2450 dyne/cm²

When surface area is 20cm*2cm is in contact then

Area= 20cm*2cm= 40cm²

Applying pressure formula = F/Area= 49000/40 dyne/cm²=  1225 dyne/cm²

When the surface area is 20cm*10cm in contact then

Area= 20cm*10cm= 200cm²

By applying the pressure formula= F/Area= 49000/200=245 dyne/cm²

Hence the maximum pressure exerted by the brick is 2450 dyne/cm²

if you want to know more about the pressure then please click on the link

https://brainly.com/question/28012687

two hypothetical metals are created with different elements that have the same atomic mass (g/mole) and the same atomic radius. metal a has a density of 9.50 g / cm 3 and metal b has a density of 8.73 g / cm 3 . if one of these metals has a bcc lattice structure and the other has an fcc lattice structure, identify the structure that corresponds to each of one of them. justify your answer.

Answers

Metal A has a more density(9.50 g/cm³) for the same atomic mass, so it is more likely to have an FCC lattice structure, whereas metal B has a comparatively less density(8.73 g/cm³), so it is more likely to have BCC lattice structure.

A body-centered cubic (bcc) lattice structure has 8 atoms at the corners of a cube and one atom in the center of the cube. This structure has a lower density compared to face-centered cubic (fcc) lattice structure, which has atoms at the corners and the centers of each face of a cube.

According to the given densities, metal A with a density of 9.50 g/cm³ is likely to have an FCC lattice structure, while metal B with a density of 8.73 g/cm³ is likely to have a BCC lattice structure. This is because the FCC structure has a higher density due to the more close-packed arrangement of atoms compared to the bcc structure.

To know more about FCC lattice structure, here

https://brainly.com/question/21327238

#SPJ4

i.
An ant crawl around a circular track of are length 22cm. At an instant it makes an
angular displacement 45°, then the radius of that circular track iS

Answers

The correct answer is 2.77m.

an air cannon fires a brick straight upward. the initial velocity of the brick and time required to reach its maximum height are recorded. which of the following statements describe the expected relationship between the time to maximum height and the initial velocity? assume that the effects of air resistance are negligible.

Answers

The greatest height is dictated by the starting vertical velocity. Because higher launch angles have a bigger vertical velocity component, increasing the launch angle increases the maximum height.

What is the relationship between maximum velocity and average velocity?

The maximum velocity of a fully developed laminar viscous flow through a circular pipe is double the average velocity. The maximum velocity for fully developed laminar flow over parallel plates is equal to (3/2) times the average velocity.

The amount of distance an item travels in a given length of time is measured by its velocity. Here's a word equation that describes the link between distance, velocity, and time: Distance travelled divided by time equals velocity.

Learn more about maximum velocity

https://brainly.com/question/20595261

#SPJ1

each night different meteorologists give us the probability that it will rain the next day. to judge how well these people predict, we will score each of them as follows: if a meteorologist says that it will rain with probability p, then he or she will receive a score of

Answers

If a meteorologist says that it will rain with probability p, then he or she will receive a score of -10log(p) and a score of -10log(1-p) if it does not rain.

What will be the score if a meteorologist says that it will rain with probability p?

The scoring system is called the Brier score, which is a commonly used method for evaluating accuracy of probabilistic forecasts. The Brier score ranges from 0 to 1, with score of 0 indicating perfect accuracy and score of 1 indicating total inaccuracy.

If a meteorologist says that it will rain with probability p, then he / she will receive a score of -10log(p) if it does rain. This is because log(p) is a measure of how uncertain the forecast is, and negative sign is used to penalize inaccurate forecasts.

To know more about meteorologists, refer

https://brainly.com/question/13196634

#SPJ4

A steel wire of length 1.93 m with circular cross section must stretch no more than 0.240 cm when a tensile (stretching) force of 450 N is applied to each end of the wire. What minimum diameter is required for the wire?

Answers

The minimum diameter required for the wire is 1.48 m when A steel wire of length 1.93 m with a circular cross-section must stretch no more than 0.240 cm when a tensile (stretching) force of 450 N is applied to each end of the wire.

Given,

wire length, l = 1.93 m

Δl = 0.240 cm = 0.24 x 10⁻² m

F = 450 N

we know that, young's modulus for steel

Y = 2.1 x 10¹¹ N/m²

let the radius of the wire is r

we know that,

Y = Fl/AΔl = (450 x 1.93)/(3.14 x r² x  0.24 x 10⁻²)

r² = 5.486 x 10⁻⁷ m²

or r = 7.4 x 10⁻⁴ m

so diameter of wire is d = 2r = 2 x 7.4 x 10⁻⁴ m

d = 1.48 x 10⁻³ m or d = 1.48 mm

Therefore, the minimum diameter required for the wire is 1.48 m when A steel wire of length 1.93 m with a circular cross-section must stretch no more than 0.240 cm when a tensile (stretching) force of 450 N is applied to each end of the wire.

To read more about young's modulus:

https://brainly.com/question/13257353

#SPJ4

Other Questions
someone who believes that the main reason to protect the natural world is to support human needs, but who believes in managing natural resources responsibly, has a(n) environmental worldview. which of the following lists is in order from smallest to largest? 25%, 0.04, 0.04, 25%, , 0.04, 25% , 25%, 0.04 sam was a farmer in the 1740s. he never acknowledged any specific gods. however, he used to believe that impersonal forces existed in people and natural objects, and these forces affected people's lives either positively or negatively. sam was most likely an adherent of . group of answer choices animism simple supernaturalism transcendent idealism theism I cant figure this out. Which math expression means "52 more than an unknown number"?O A. x- 52 B. x+ 52O C. 52 - x D. x = 52 based on the information in the graphic, which of the following claims would an opponent to the decision in citizens united v. federal elections commission (2010) most likely make? choose 1 answer: If you have a short time frame for data collection and need an answer immediately, you likely will have to use historical data.True/ False what is the standard temperature and pressure (stp) as defined by the international union of pure and applied chemistry (iupac)? which fine motor skills may be observed in an 8- to 10-month-old infant? select all that apply. one, some, or all responses may be correct. quilet management science uses ---select--- considerations in order to establish policies that are in the best interest of the organization. A. only quality B. only quantitively C. both quality and quantitively Which of the answers below best describes the gen- eral shape of Mt. Fuji? a. A large linear fissure in Earth's surface b. A low-relief, very broad shield volcano c. A steep-sided, low-elevation cinder cone d. A high-elevation, steep-sided stratovolcano 3 questions. 4 answers1. whats 28+58x38-48+59/392. who wants to roleplay - y/n3. i.d.k third question your friend in another school has written a letter to you telling you about the subjects he or she has chosen for ssce write a letter telling him or her about the subjects you chose for your ssce what are the coordinates of P? elephants are endangered, but cows are not because a it is legal to kill cows but not elephants. b cows are a common resource, while elephants are private goods. c there is more meat on an elephant than on a cow and therefore it is more valuable. d elephants are a common resource, while cows are private goods. e cows are not as valuable as elephants. two-finger morra is a game in which two players each hold up one or two fingers. the payoff, in dollars, is the total number of fingers shown. r receives the payoff if the total is even, and c receives the payoff if the total is odd. write the payoff matrix. ships were allowed to be able to freely navigate the oceans during times of peace. the french and the british both had captured us ships and forced them into the service of their countries. True or False which of the following contributes to the economic problem of scarcity? responses human wants are insufficient. human wants are insufficient. human wants are limited. human wants are limited. resources are efficient. resources are efficient. resources are expensive. resources are expensive. resources are limited. which right-wing pressure group was founded by robert welch junior in 1958? Select the correct answer from the drop-down menu.Both the excerpt from the text and the graphic share information about Life Cycle Assessment. What does the graphic emphasize that the text does not?Of the two mediums, the graphic places more emphasis on . What is the area of the shaded region below?