Answer:
convex f = 33 cm
concave f = -33 cm
Explanation:
In geometric optics the focal length of a lens is given by
[tex]\frac{1}{f} = ( n-1) \ (\frac{1}{R_2} - \frac{1}{R_1} )[/tex]
where n is the refractive index of the medium, R₁ and R₂ are the focal lengths on each side of the lens.
In this case one of the sides is flat so its focal length is infinite, if the lens is convex the focal length is positive, convergent lens and if it is concave the focal length is negative, divergent lens.
[tex]\frac{1}{f} = (n-1) \ \frac{1}{R}[/tex]
the refractive index of the glass is n = 1.5
let's calculate
1 / f = (1.5 -1) 1 / 16.5
1 / f = 0.03030
f = 33 cm
convex f = 33 cm
concave f = -33 cm
3) A 30 kg child slides freely across a "Slip and Slide" on LEVEL GROUND. While the child slides, the force applied to keep them sliding is 0 N. The coefficient of kinetic friction is 0.02. What is the acceleration experienced by the child?
Answer:
a = 0.1962 m/s^2
Explanation:
The magnitude of kinetic friction exerted is given by
[tex]F_k=\mu_kN[/tex]
Where, μ_k= coefficient of kinetic friction= 0.02 and N = reaction force = mg
Where m= mass = 30 Kg and, g is acceleration due to gravity =9.81 m/s^2
F_k=0.02×30×9.81 =5.886 N
Now, since, there is no applied force this kinetic friction force will cause acceleration of the child
⇒ ma = F_k
here, a is the acceleration
⇒30a = 5.886
⇒ a = 0.1962 m/s^2
A wooden block meauring 40cm x 10cm x 5cm has a mass 850gm . find the density of wood?
please answer me.
Answer:
Explanation:
Density = Mass / Volume = 850 / 40*10*5 = 0.425 g /cm^3
from
Which energy transformation is correct?
O From A to C, kinetic energy is transformed into
gravitational potential energy.
O From C to D, kinetic energy is transformed into
gravitational potential energy.
O From C to E, gravitational potential energy is
transformed into kinetic energy.
O From D to E, gravitational potential energy is
transformed into kinetic energy.
B. The energy transformation that is correct is From C to D, kinetic energy is transformed into gravitational potential energy.
What is law of conservation of energy?The law of conservation of energy states that energy can neither be created nor destroyed but can be transformed from one form to another.
Energy transformation in the pendulum;
At point A, there's only gravitational potential energy and no kinetic energy, because the pendulum is at rest at A. At point C, it has maximum speed since all of the potential energy is transformed into kinetic energy. Therefore, at this point there is only kinetic energy and no potential energy.At point E, it is the same as at point A, but in opposite side. So, at this point there is no kinetic energy.At points B and D there are both kinetic and potential energy. At point B the kinetic energy is increasing and at point D it is decreasing.Thus, the energy transformation that is correct is From C to D, kinetic energy is transformed into gravitational potential energy.
option B is the correct answer.
Learn more about energy transformation here: https://brainly.com/question/2667612
#SPJ1
Answer:
B is Correct
Explanation:
From C to D, kinetic energy is transformed into gravitational potential energy.
What are the biotic factors in this image?
Someone help thank you!!
You are studying a population of flowering plants for several years. When you present your research findings you make the statement that, "Increased allocation of resources to reproduction relative to growth diminished future fecundity." Which of the following graph descriptions could accurately present your data?
a) With seeds in the current year on the y-axis and seeds in the previous year on the x-axis, you would see a line that increased from left to right
b) With survivorship on the y-axis and number of seeds produced on the x-axis, you would see a line that decreased left to right.
c) With leaf area on the y-axis and number of seeds produced on the x-axis, you would see a line that increased left to right
d) With survivorship on the y-axis and number of seeds produced on the x-axis, you would see a line that increased left to right.
e) With seeds in the current year on the y-axis and seeds in the previous year on the x-axis, you would see a line that decreased from left to right
Answer:
Option A
Explanation:
The graph for this problem must depict the following ""Increased allocation of resources to reproduction relative to growth diminished future fecundity."
Hence, the survivor ship must be on the Y axis and the resources on the X axis.
Here the resources include the number of seeds produced.
hence, the higher is the number of seeds (resource), the lower is the survivorship (future fecundity)
Hence, option A is correct
two spheres of radii 5cm and 3cm are given charges on risk volume and 50 calling respectively and then connected by a wire calculate the loss of energy after connection
Answer:
Solution given:
Radius of small sphere[r]=5cm=0.05m
Radius of large sphere[R]=10cm=0.1m
capacitance of small sphere[c]=4πε0r
=[tex]4π*8.85×10^{-12}×0.05=5.56*10^{-12}F[/tex]
Charge for small sphere[Q1]=100C
Charge for small sphere[Q2]=50C
Potential difference [V1]=[tex] \frac{charge}{capacitance}=\frac{100}{5.56*10^{-12}}=1.8×10^{13}[/tex]V
.
again
capacitance of small sphere[C]=4πε0R
=[tex]4π*8.85×10^{-12}×0.1=1.11*10^{-11}F[/tex]
Potential difference [V2]=[tex] \frac{charge}{capacitance}=\frac{50}{1.11*10^{-11}}=4.5×10^{12}[/tex]V
Now
Loss of energy:
[tex] \frac{cC(V1-V2)^{2}}{2(c+C)}[/tex]
=[tex] \frac{5.56*10^{-12}*1.11*10^{-11}(1.8*10^{13}-4.5*10^{12})^{2}}{2(5.56*10^{-12}+1.11*10^{-11})}[/tex]
=25Joule
A physics student mounts two thin lenses along a single optical axis (the lenses are at right angles to the line connecting them, and they appear concentric when viewed from either end). The lenses are identical, each with a positive (converging) focal length of 14.8 cm. They are separated by a distance of 39.4 cm. Lens 1 is to the left of Lens 2.
Required:
a. What is the final image's distance (in cm) from Lens 2?
b. Where is the final image located?
c. What is the overall magnification of the lens pair, considered as a single optical instrument?
Answer:
A) q₂ = 75.98 cm, B) q₂' = 115.38 cm, C)
Explanation:
A) This is an exercise in geometric optics, as the two lenses are separated by a greater distance than their focal lengths from each lens, they must be worked as independent lenses.
Lens 1. More to the left
let's use the constructor equation
[tex]\frac{1}{f} = \frac{1}{p} + \frac{1}{q}[/tex]
where f is the focal length, p and q are the distance to the object and the image, respectively,
We must assume a distance to the object to perform the calculation, suppose that the object is 50 cm from lens 1 that is further to the left of the system.
[tex]\frac{1}{q_1} = \frac{1}{f} - \frac{1}{p}[/tex]
[tex]\frac{1}{q_1} = \frac{1}{14.8} - \frac{1}{50}[/tex]
1 / q₁ = 0.04756
q₁ = 21.0227 cm
this image is the object for the second lens that has f₂ = 14.8 cm
the distance must be measured from the second lens
p₂ = 39.4 -q₁
p₂ = 39.4 -21.0227
p₂ = 18.38 cm
let's use the constructor equation
1 / q₂ = 1 / f - 1 / p2
[tex]\frac{1}{q_2} = \frac{1}{14.8} - \frac{1}{18.38}[/tex]
[tex]\frac{1}{q_2}[/tex] = 0.01316
q₂ = 75.98 cm
measured from the second lens
B) the position of the final image with respect to the first lens is
q₂’= q₂ + 39.4
q₂'= 75.98 +39.4
q₂' = 115.38 cm
C) the magnification of a lens is
m = - q / p
in this case the image measured from lens 2 is q2 = 75.98 cm
the distance to the object from the first lens is p1 = 50cm
m = - 75.98 / 50
m = -1.5 X
the negative sign indicates that the image is inverted
In any given wave, when the frequency of the wave doubles (f = 2f), which of the following other changes would also take place?
A The wavelength would double (λ = 2λ).
B The velocity would double (v = 2v).
C The wavelength would be half (λ = λ/2).
D The velocity would be half (v = v/2).
Answer:
The correct answer is -
B. The velocity would double (v = 2v).
C. The wavelength would be half (λ = λ/2).
Explanation:
A wave has a speed or velocity that is related to the wavelength of the wave and the frequency of the wave and this relationship can be represented by the following equation-
Wave velocity V = Wavelength (λ) * Frequency (f)
Frequency (f) = Velocity (V) / Wavelength(λ).
The frequency and wavelength are inversely proportional and frequency and velocity are directly proportional to each other.
So, if f = 2f then,
putting value in the formula,
2f = 2v/λ, which means, f = 2v and f = λ/2
when the frequency is doubled, the wavelength will be halved and velocity will be doubled.
Which element would have properties most like helium (He)?
A. Ar
B. Hg
C. H
D. O
Answer: A. Ar
Explanation: not anything else besides Ar
The load across a 12 V battery consists of a series combination of three resistors 34 Ω, 42Ω, and 30Ω. What is the total resistance of the load? Answer in units of Ω. What is the current in the circuit? Answer in units of A.
Answer:
The total resistance is 106 Ω and the current in the circuit is 0.11 A.
Explanation:
Given that,
Voltage of the battery, V = 12 V
Resistors 34 Ω, 42Ω, and 30Ω are connected in series.
The total resistance is given by :}
R = 34 + 42 +30
= 106Ω
Let I is the total current in the circuit. Using ohm's law to find it such that,
[tex]I=\dfrac{V}{R}\\\\I=\dfrac{12}{106}\\\\I=0.11\ A[/tex]
Hence, the total resistance is 106 Ω and the current in the circuit is 0.11 A.
A spinning disc with a mass of 2.5kg and a radius of 0.80m is rotating with an angular velocity of 1.5 rad/s. A ball of clay with unknown mass is dropped onto the disk and sticks to the very edge causing the angular velocity of the disk to slow to 1.13 rad/s. What is the mass of the ball of clay
Answer:
M = 1.90 Kg
Explanation:
Given data: mass = 2.5 Kg
radius R = 0.8 m
angular velocity ω = 1.5 rad/s
Angular momentum L =0.5×Iω^2
Where, I is the moment of inertia of the spinning disc.
I = 0.5MR^2
I = 0.5×2.5×0.8^2
I = 0.8 Kg/m^2
Then L = 0.5×0.8×1.5^2 = 0.8×2.25 = 0.9 Kg-m^2/sec
Let unknown mass be M
New mass of disc = (2.5+M) Kg, R = 0.8 m
New I = 0.5(2.5+M)(0.8)^2
Since, angular momentum is conserved
Angular momentum before = angular momentum after
0.5×0.5(2.5+M)(0.8)^2×(1.13)^2 = 0.9
Solving for M we get
0.204304(2.5+M)=0.9
M = 1.90 Kg
What is an electron?
(it’s D lol)
Answer:
D
Explanation:
he electric field is dependent on the distance between the plates. false: The voltage of a connected charged capacitor decreases when the plate area is increased. false: The voltage of a disconnected charged capacitor increases when the plates are brought closer together.
Answer:
False.
Explanation:
The voltage of a disconnected charged capacitor decreases when the plates are brought closer together because the capacitance is inversely proportional to the area. If the area between plates decreases, its capacitance increases and vice versa. There is direct relationship between voltage of a disconnected charged capacitor and plates. If the distance between plates decreases, the voltage of a disconnected charged capacitor is also decreases while on the other hand, if the distance between plates increases, the voltage of a disconnected charged capacitor is also increases.
The table shows the relationship between the masses of two objects, the distance between the two objects, and the gravitational force between the objects. A 4-column table with 5 rows. The first column labeled Mass of Object 1 (kilograms) has entries 1, 2, 2, 3, 9. The second column labeled Mass of Object 2 (kilograms) has entries 1, 1, 2, 3, 3. The third column labeled Distance between Objects 1 and 2 (meters) has entries 1, 1, 2, 1, 3. The fourth column labeled Gravitational Force Objects 1 and 2 (Newtons) has entries 1 G, 2 G, 1 G, 9 G, 3G. Which conclusion is supported by the data in the table? An increase in the mass of an object causes the same decrease in the gravitational force. An increase in the distance between the objects causes the same decrease in the gravitational force. An increase in the distance between the objects causes a greater change in the gravitational force than the same increase in mass. An increase in the mass causes a greater change in the gravitational force than the same increase in the distance between the objects. Brainlyest for correct answer!
Answer:
C
Explanation:
edge 2020... Using elimination it's the only one that makes sense.
The statement third "an increase in the distance between the objects causes a greater change in the gravitational force than the same increase in mass" is correct.
What is gravitational force?The gravitational force is a force that attracts all mass-bearing objects. The gravitational force is referred to as attractive because it always strives to pull masses together rather than pushing them apart.
As we know, the gravitational force is given by:
[tex]\rm F = \dfrac{Gm_1m_2}{r^2}[/tex]
Where, G is the gravitational constant.
m1 and m2 are masses.
r is the distance between the masses.
From the data given in the table, shows that:
The gravitational force is indirectly proportional to the square of the distance.
Thus, the statement third "an increase in the distance between the objects causes a greater change in the gravitational force than the same increase in mass" is correct.
Learn more about the gravitational force here:
https://brainly.com/question/12528243
#SPJ2
A 70 kg human body typically contains 140 g of potassium. Potassium has a chemical atomic mass of 39.1 u and has three naturally occurring isotopes. One of those isotopes, 40K (potassium), is radioactive with a half-life of 1.3 billion years and a natural abundance of 0.012 %. Each 40K (potassium) decay deposits, on average, 1.0 MeV of energy into the body.
What yearly dose in Gy does the typical person receive from the decay of 40K (potassium) in the body? Express your answer using two significant figures.
Answer:
Gy = 3.14x10⁻⁴ Gy
Explanation:
To get the dose in Gy we need to use the following expression:
Gy = E / m (1)
Where:
Gy: dose
E: energy absorbed per atom
m: mass of the human body.
We don't have the energy per atom, but we can calculate that by following the next procedure.
First, let's determine the number of atoms of potassium in our body. For that we need to determine the moles in the 140 g of potassium, with the molecular mass and then, use the avogadro's number:
moles = m/MM
moles = 140 / 39.1 = 3.58 moles
N° atoms = 3.58 * 6.02x10²³ atoms = 2.16x10²⁴ atoms of K.
The abundance of the ⁴⁰K is 0.012% so the atoms of this isotope would be:
N = 2.16x10²⁴ * (0.012/100) = 2.59x10²⁰ atoms of ⁴⁰K.
With this number, and the half life rate, we can determine the number of decay atoms in a year (λ) using the following expression:
λ = ln2 / t(1/2)
λ = ln2 / 1.3x10⁹ = 5.33x10⁻¹⁰ year⁻¹
This number, multiplied by the number of atoms:
R = 5.33x10⁻¹⁰ * 2.59x10²⁰ = 1.38x10¹¹ atoms/year
Now, each atom of K gives an average energy of 1 MeV, so with the atoms we have:
E = 1.38x10¹¹ * 1x10⁶ eV = 1.38x10¹⁷ eV
This value can be expressed in Joules so:
E = 1.38x10¹⁷ eV * (1 J / 6.24x10¹⁸ eV) = 0.022 J
Finally, we can use (1) to get the dose in Gy:
Gy = 0.022 / 70
Gy = 3.14x10⁻⁴ GyHope this helps
What is Hooke's law? what is meant by elastic limit?
please answer me
Answer:
Explanation:
The law is about how object will be deformed when certain amount force is applied. Elastic limit is a point where object will not return its previous shape after being deformed
Besides ethical considerations, what is another reason why Milgram’s experiment may be difficult to duplicate?
Suppose that an electron and a positron collide head-on. Both have kinetic energy of 1.20 MeV and rest energy of 0.511 MeV. They produce two photons, which by conservation of momentum must have equal energy and move in opposite directions. What is the energy Ephoton of one of these photons
Answer:
E = 1.711 MeV
Explanation:
From the law of the conservation of energy:
[tex]K.E_{e}+K.E_p + E_{e}+E_{p} = 2 E[/tex]
where,
[tex]K.E_e=K.Ep=[/tex] the kinetic energy of positron and electron = 1.2 MeV
[tex]E_e=E_p =[/tex] Rest energy of the electron and the positron = 0.511 MeV
E = Energy of Photon = ?
Therefore,
[tex]1.2\ MeV + 1.2\ MeV + 0.511\ MeV + 0.511\ MeV = 2E\\\\E = \frac{3.422\ MeV}{2}\\\\[/tex]
E = 1.711 MeV
What is the resistance of a rheostat coil, if 0.05 A of current flows through it when 6 V is applied
across it? 1200
Answer:
i have no idea i came here to find out too :(
Explanation:
Please help ASAP with questions
Two electromagnetic waves are traveling through empty space. The wave with the greater wavelength is also characterized by _____.
a. the lower frequency
b. the higher frequency
c. the faster speed
d. the slower speed
A child is holding a wagon from rolling straight back down in a driveway that inclined at 20 degree horizontal. if the wagon weigh 150n with what force must the child pull on the handle if the handle is parallel to the incline?
Answer:
F = 51.3°
Explanation:
The component of weight parallel to the inclined plane must be responsible for the rolling back motion of the car. Hence, the force required to be applied by the child must also be equal to that component of weight:
[tex]F = Parallel\ Component\ of\ Weight\ of\ Wagon= WSin\theta\\[/tex]
where,
W = Weight of Wagon = 150 N
θ = Angle of Inclinition = 20°
Therefore,
[tex]F = (150\ N)Sin\ 20^o[/tex]
F = 51.3°
When an object levitates, the magnetic force causes the object to repel. Without this magnetic force, ________ would pull the object down.
Answer:
gravity
Explanation:
I don't know what the explanations would be
Say the turbine is 10 feet in diameter (that's the radius of the dashed circle). Also say that the coil has 100 turns and has a square cross-section with a length of 10 feet and a height of 6 feet. Say that the magnetic rotor has the same height but is only 2 feet wide, it has a magnetic field strength is 0.1T, and it is rotating at 60Hz (note this is not the angular frequency). A typical turbine supplies 10kW of power. Use Faraday's law to find the induced emf in the coil and the amount of induced current.
Answer:
a. ε = 21,014sin(120πt) V
b. 0.476cosec(120πt)
Explanation:
a. Induced emf
We know the induced emf, ε = -dΦ/dt where Φ = magnetic flux through coil = NABcosθ where N = number of turns of coil =, 100, A = area of coil = 10 ft × 6 ft = 60 ft² = 60 × 1 ft² = 60 × (0.3048)² m² = 5.574 m², B = magnetic field strength = 0.1 T and θ = angle between B and normal to A = ωt.
So, Φ = NABcosθ = 100 × 5.574 m² × 0.1 T cosθ = 55.74cosθ Tm²
So, ε = -dΦ/dt = ε = -d(55.74cosθ Tm²)/dt = -d(55.74cosθ Tm²)/dθ × dθ/dt = -55.74 ×(-sinθ) Tm²)/dθ × ω (ω = dθ/dt = angular frequency of shaft = 2πf where f = frequency of rotor = 60 Hz )
ε = 55.74sinθ Tm²) × 2πf
ε = 55.74sinθ Tm²) × 2π(60 Hz)
ε = 6689πsinθ V
ε = 21,014sinθ V
ε = 21,014sinωt V
ε = 21,014sin(2πft) V
ε = 21,014sin(2π(60 Hz)t) V
ε = 21,014sin(120πt) V
b. Current in coil
Since power P = Iε where I = current and ε = induced emf = 21,014sinθ V.
Since power, P = 10 kW = 10000 W
I = P/ε
= 10000 W/21,014sinθ V
= 0.476/sinθ
= 0.476cosecθ
= 0.476cosecωt
= 0.476cosec(120πt)
The maximum current is obtained when θ = 90°
I = 10000 W/21,014sin90 V
I = 10000 W/21,014 V
I = 0.476 A
I = 476 mA
His eyes are 1.83 m above the floor, and the top of his head is 0.15 m higher. Find the height above the floor of the top and bottom of the smallest mirror in which he can see both the top of his head and his feet.
Answer:
y_lower = 0.915 m, y_superior = 1,905 m
Explanation:
In this exercise we use the law of reflection for a flat mirror.
θ’= θ
To see the feet of the person a ray of light that part of them must reach the bottom of the mirror and its reflection has to reach the eyes.
As the law of reflection the incident and reflected angles are equal, the distance from the floor to the point where the two rays (incident and reflected) touch the mirror must be symmetrical, oses from the floor
y = 1.83 / 2
y = 0.915 m
To see the head, a ray of light that comes from the tip of the head and is reflected in the mirror must reach the eyes. As the head is 0.15 m above the eyes and the incident and reflected rays have the same angle, the mirror must be at half the height, that is, the mirror is 0.075 m below the tip of the head.
In summary
* the bottom of the mirror is 0.915 m from the ground
* the top of the mirror is at 1.83 + 0.075
y_superior = 1,905 m
ground
What is the typical pH of acid rain?
Answer:
5.0-5.5 is the answer to your question
The tension in a pulley belt is 31 N when stationary. Calculate power in watts transmitted when the belt is on the point of slipping on the smaller wheel. the wheel is 379 mm diameter and the coefficient of friction is 0.3. The angle of lap is 1610. The wheel speed is 1,547 rev/min.
Answer:
P = 756.84 Watts
Explanation:
As the tension is stationary or innitial, T₀ = 31 N, the mean would be:
T₁ + T₂ / 2 = T₀ (1)
T₁ + T₂ = 2 * 31 = 62 N
Now, with the following expression we can determine the linear speed:
V = πWD (2)
W: angular speed of the wheel (rev/s)
D: diameter of the wheel (in meters)
W = 1547 rev/min * (1 min/60 s) = 25.78 rev/s
V = π * 25.78 * 0.379 = 30.695 m/s
We also know that:
T₁ / T₂ = exp (μθ)
T₁ = T₂ exp(μθ) (3)
We already have those values so replacing:
T₁ = T₂ exp(0.3 * 161 * π/180)
T₁ = 2.32T₂ (4)
We can now replace (4) in (1) like this:
T₁ + T₂ = 62 N
2.32T₂ + T₂ = 62
3.32T₂ = 62
T₂ = 18.67 N
Which means that T₁:
T₁ = 2.32(18.67)
T₁ = 43.33 N
Finally, the power can be determined using the following expression:
P = (T₁ - T₂)V (5) Replacing we have:
P = (43.33 - 18.67)*30.695
P = 756.84 WattsHope this helps
Explain what happens during stages A and B.
A 7.5 cm tall Aragorn action figure is placed 12.4 cm in front of a double convex lens. If the image of Aragorn is located 7.5 from the lens, what is the focal length of the lens?
Answer:
f = 4.67 cm
Explanation:
Here, we can use the thin lens formula, as follows:
[tex]\frac{1}{f}= \frac{1}{p}+ \frac{1}{q}\\\\[/tex]
where,
f = focal length of lens = ?
p = distance of object from lens = 12.4 cm
q = distance of image from lens = 7.5 cm
Therefore,
[tex]\frac{1}{f} =\frac{1}{12.4\ cm} +\frac{1}{7.5\ cm}\\\\\frac{1}{f} = \frac{1}{4.67\ cm}[/tex]
f = 4.67 cm
A 10- kg ball starting from rest rolls down a 5 m tall smooth hill from one person to another person who is standing at the bottom of the hill with a big spring whose constant is 100 N/m. How far does the spring compress in order to stop the ball
Answer: 3.13 m
Explanation:
Given
mas of the ball is m=10 kg
The ball rolls down a vertical distance of 5 m
Spring constant of spring is [tex]k=100\ N/m[/tex]
Here, the potential energy of the ball converted into kinetic energy which in turn converts into elastic potential energy
[tex]\Rightarrow mgh=\frac{1}{2}kx^2\quad [\text{x=compression in the spring}]\\\\\Rightarrow 10\times 9.8\times 5=\frac{1}{2}\cdot 100\cdot x^2\\\Rightarrow x=\sqrt{9.8}\\\Rightarrow x=3.13\ m[/tex]
Thus, the spring compresses by 3.13 m.