The lost isle of change escape room answers

The pressure of the 19 L container, given that it contains 25 moles of gas at 0 °C is 29.49 atm

First, we shall list out the given parameters from the question. This is shown below:

The pressure of the container can be obtain as follow:

PV = nRT

P × 19 = 25 × 0.0821 × 273

P × 19 = 560.3325

Divide both sides by 19

P = 560.3325 / 19

P = 29.49 atm

Thus, we can conclude that the pressure of the container is 29.49 atm

Learn more about pressure:

https://brainly.com/question/15343985

#SPJ1

The resulting species when a weak diprotic acid deprotonates will depend on the specific substance. It could be both an acid and a base or only an acid or a base. Therefore, Option C is correct.

When a weak diprotic acid deprotonates, it can form different species depending on the specific acid. A diprotic acid is capable of donating two protons (H+) per molecule.

If the first proton is completely removed from the diprotic acid, it will form a monoprotic base. In this case, the resulting species will act as a base because it can accept a proton (H+). This species can be described as a base.

To learn more about the diprotic acid, follow the link:

https://brainly.com/question/12772803

#SPJ12

To draw the partial orbital picture of CH2 (singlet methylene carbene) and include p-orbital, lone pair orbital, three-dimensional geometry, and hybridization, follow these steps:

1. Draw the carbon atom at the center, with two hydrogen atoms bonded to it in a V-shape. This indicates the molecule has a bent structure.

2. For hybridization, the carbon atom is sp2 hybridized. This means that one s-orbital and two p-orbitals on the carbon atom have mixed to form three sp2 orbitals.

3. Arrange the three sp2 hybrid orbitals in a trigonal planar geometry around the carbon atom, with bond angles of approximately 120 degrees. Connect one sp2 orbital to each hydrogen atom, and one sp2 orbital will have a lone pair of electrons.

4. The remaining p-orbital on the carbon atom, which is perpendicular to the plane of the molecule, will be unhybridized and empty.

So, the partial orbital picture of CH2 (singlet methylene carbene) shows a carbon atom with a bent geometry, sp2 hybridization, and an empty p-orbital perpendicular to the plane of the molecule. The carbon atom is bonded to two hydrogen atoms, and there is a lone pair of electrons in one of the sp2 orbitals.

To know what is hybridization : https://brainly.com/question/22765530

#SPJ11

The author communicates that the purpose of temperature measurements taken by the Weather Bureau was similar to that of the measurements taken by NASA and NOAA today by highlighting the similarities between the two.

The author states that the Weather Bureau’s measurements were taken “with the same accuracy and precision” as those of NASA and NOAA today.

Thus, by highlighting the similarities between the two sets of measurements, the author communicates that the purpose of temperature measurements taken by the Weather Bureau was similar to that of the measurements taken by NASA and NOAA today.

Learn more about  NASA at:

https://brainly.com/question/20763143

#SPJ1

(a) Acidity: HCl > HBr > HI. The order of acidity of HCl, HBr, and HI is determined by their relative strengths. HCl is the strongest acid in the group, followed by HBr and then HI.

HCl has the greatest number of hydrogens, which allows it to donate more protons and thus produce more acidic solutions. HBr and HI both have fewer hydrogens, making them weaker acids than HCl.

(b) Basicity: H2O > OH− > H− > Cl−

The order of basicity of H2O, OH−, H−, and Cl− is determined by the relative strengths of the conjugate acids of the bases. H2O has the strongest conjugate acid, and therefore is the strongest base in the group.

OH− is the next strongest base, followed by H− and then Cl−. The conjugate acid of Cl− is the strongest of the acids, making it the weakest base of the group.

(c) Basicity: Mg(OH)2 > Si(OH)4 > ClO3(OH) (HClO4)

The order of basicity of Mg(OH)2, Si(OH)4, and ClO3(OH) (HClO4) is determined by their relative strengths. Mg(OH)2 has the strongest conjugate acid, and is thus the strongest base in the group.

Si(OH)4 is the next strongest base, followed by ClO3(OH). The conjugate acid of ClO3(OH) is the strongest of the acids, making it the weakest base of the group.

(d) Acidity: HF > H2O > NH3 > CH4

The order of acidity of HF, H2O, NH3, and CH4 is determined by their relative strengths. HF is the strongest acid in the group, followed by H2O and then NH3. CH4 is the weakest acid in the group.

HF has the greatest number of hydrogens, which allows it to donate more protons and thus produce more acidic solutions. H2O and NH3 both have fewer hydrogens, making them weaker acids than HF. CH4 has no hydrogens, making it the weakest acid of the group.

Know more about conjugate acids here

https://brainly.com/question/31229565#

#SPJ11

To solve this problem, we need to use the solubility product expression for calcium iodate:

Ca(IO3)2(s) ⇌ Ca2+(aq) + 2IO3-(aq)

The solubility product constant, Ksp, is given by:

Ksp = [Ca2+][IO3-]^2

To calculate Ksp for a saturated solution of Ca(IO3)2 in 0.0100 M KIO3, we need to determine the concentrations of Ca2+ and IO3- ions at equilibrium. We assume that Ca(IO3)2 is completely dissociated and that the activity coefficients of the ions are equal to 1. Therefore, we can write:

Ca(IO3)2(s) ⇌ Ca2+(aq) + 2IO3-(aq)

Let's assume that the molar solubility of Ca(IO3)2 in this solution is s. Then, the concentrations of Ca2+ and IO3- ions at equilibrium are [Ca2+] = s and [IO3-] = 2s. Substituting these values into the Ksp expression, we get:

Ksp = [Ca2+][IO3-]^2 = s(2s)^2 = 4s^3

Now, we need to determine the value of s by using the given concentration of KIO3. Since KIO3 is a strong electrolyte, it completely dissociates in water to give K+ and IO3- ions. Therefore, the concentration of IO3- ions in the solution is equal to the concentration of KIO3, which is 0.0100 M. Using this value, we can write the following equilibrium equation for Ca(IO3)2:

Ca(IO3)2(s) ⇌ Ca2+(aq) + 2IO3-(aq)

ICE table:

I: Ca(IO3)2(s) -- -- --

C: -s +s +2s

E: s 2s --

Substituting the equilibrium concentrations into the Ksp expression, we get:

Ksp = 4s^3 = 5.12 × 10^-10

Therefore, the solubility product constant for Ca(IO3)2 in 0.0100 M KIO3 is 5.12 × 10^-10.

To calculate the molar solubility of Ca(IO3)2 in 0.020 M Ca(NO3)2, we can assume that Ca(NO3)2 is completely dissociated and that the activity coefficients of the ions are equal to 1. Therefore, we can write:

Ca(IO3)2(s) ⇌ Ca2+(aq) + 2IO3-(aq)

Let's assume that the molar solubility of Ca(IO3)2 in this solution is s. Then, the concentrations of Ca2+ and IO3- ions at equilibrium are [Ca2+] = 0.020 M and [IO3-] = 2s. Substituting these values into the Ksp expression, we get:

Ksp = [Ca2+][IO3-]^2 = (0.020)(2s)^2 = 0.08s^2

Since Ksp = 2.0 × 10^-4, we can write:

0.08s^2 = 2.0 × 10^-4

Solving for s, we get:

s = 0.0158 M

Therefore, the molar solubility of Ca(IO3)2 in 0.020 M Ca(NO3)2 is 0.0158 M.

To know more about electrolyte

brainly.com/question/29771118

#SPJ11

In an aqueous solution, a weak base partially dissociates, forming a conjugate acid and increasing the hydroxide ion concentration. The extent of this dissociation is represented by the base ionization constant (Kb). On the other hand, a strong base completely dissociates in water, forming a conjugate acid and significantly increasing the hydroxide ion concentration.

During titration, a precise amount of a solution of known concentration (titrant) is added to a solution with an unknown concentration (analyte) to determine its concentration. The moment in the titration where exactly enough base has been added to completely react with the acid is called the equivalence point. The acid ionization constant (Ka) represents the extent of dissociation of a weak acid, which forms a conjugate base and increases the hydronium ion concentration in the solution.

Learn more about base ionization here:

https://brainly.com/question/31359427

#SPJ11

To express the electron configuration in the requested format (e.g., 1s²,2s²), follow the order of orbital filling according to the Aufbau principle.

To understand how to write electron configurations using the terms "orbital" and "string", which is as follows:
1s, 2s, 2p, 3s, 3p, 4s, 3d, 4p, 5s, 4d, 5p, 6s, 4f, 5d, 6p, 7s, 5f, 6d, 7p
For a given element, fill the electrons in each orbital according to their capacity (1s can hold 2 electrons, 2p can hold 6, and so on). Write the string without spaces, using "²" to indicate the superscript for the number of electrons in each orbital.
For example, for oxygen (O), with 8 electrons:
1s²,2s²,2p⁴

The eight electrons in the shell, known as the valence election configuration, are what create chemical bonds. Distribution of elections within an atom is the electron configuration.

Learn more about electron configuration here

https://brainly.com/question/29757010

#SPJ11

A solid matter with atoms arranged in a regular, repeating pattern is called a crystalline solid. In a crystalline solid, the atoms, ions, or molecules are organized into a highly ordered and periodic structure known as a crystal lattice.

This arrangement leads to unique properties and characteristics, such as distinct melting points, conductivity, and hardness.
There are several types of crystalline solids, including ionic, covalent, metallic, and molecular crystals, each with its unique bonding and structure. Ionic crystals are formed by the electrostatic attraction between oppositely charged ions, while covalent crystals consist of atoms connected by covalent bonds. Metallic crystals are composed of metal atoms with a sea of delocalized electrons, and molecular crystals are held together by intermolecular forces such as hydrogen bonding or van der Waals forces.
The regular arrangement of atoms in a crystalline solid contributes to its stability, as the repeating pattern minimizes the overall energy of the system. This regularity also affects the solid's physical properties, such as its ability to refract light, resulting in various optical phenomena like diffraction and interference.
The study of crystalline solids is an essential aspect of materials science and chemistry, as understanding their structure and properties allows scientists and engineers to design and synthesize materials with specific characteristics for various applications, from electronics to pharmaceuticals.
In contrast to crystalline solids, amorphous solids have atoms that lack a regular, repeating pattern. These disordered structures result in different physical properties and behaviours, distinguishing them from their crystalline counterparts.

To learn more about crystalline solid, refer:-

https://brainly.com/question/28274778

#SPJ11

There are approximately 3.011 x 10^23 molecules of nitrogen gas in 14g of nitrogen gas at STP.

We calculate the amount of moles of nitrogen gas in 14g in order to determine how many molecules there are at STP.

Number of moles = mass / molar mass

Number of moles = 14g / 28 g/mol

Number of moles = 0.5 mol

So,  0.5 moles of nitrogen gas are present in 14g of nitrogen gas at STP.

The number of molecules in one mole of any substance, or Avogadro's number, can now be used to determine how many molecules are present in 0.5 moles of nitrogen gas:

Number of molecules = Avogadro's number x number of moles

Number of molecules = 6.022 x 10^23 molecules/mol x 0.5 mol

Number of molecules = 3.011 x 10^23 molecules

Therefore, there are approximately 3.011 x 10^23 molecules of nitrogen gas in 14g of nitrogen gas at STP.

Learn more about Avogadro's number here : brainly.com/question/16060223

#SPJ1

The pH values at different points in the titration of barbituric acid with KOH were calculated. The pH was initially acidic and decreased as KOH was added until the equivalence point was reached. After the equivalence point, the pH became basic and increased rapidly as excess KOH was added.

For more such question on pH values

https://brainly.com/question/27648332

#SPJ11

Answer:

The third one: An ion or small molecule that makes a stable bond to a metal cation through sharing of unpaired electrons

Explanation:

"A ligand is an ion or molecule that can form a stable complex with a metal cation by sharing a pair of electrons". This is the correct option.

This process is called coordination, and the resulting complex is called a coordination complex. It can be anions, such as chloride (Cl-) or cyanide (CN-), or neutral molecules, such as ammonia (NH3) or water (H2O).

In a chemical reaction, the ligand binds to the metal cation to form a complex. The complex can then undergo various reactions, such as oxidation or reduction, or it can dissociate back into the metal cation and the ligand.

Ligands are important in many fields, including biochemistry, inorganic chemistry, and catalysis.

Ligands are not the solvent in a reaction, as the solvent is the substance in which the reaction occurs.

Also, a ligand is not an exact quantity of a substance, as the amount of ligand present can vary.

Finally, a ligand can be found on either the reactant or product side of a reaction equation, depending on the reaction being studied.

to know more about ligands refer here:

https://brainly.com/question/12449406#

#SPJ11

The atomic number of an element represents the number of protons in the nucleus. In this case, the atomic number is 6. Therefore, there are 6 protons in the nucleus of this element. The correct answer is B. 6.

The atomic number of an element represents the number of protons in the nucleus. In this case, the atomic number is 6, which means there are 6 protons in the nucleus. The atomic mass is the sum of the number of protons and neutrons in the nucleus. Since the atomic mass is 12.01 and the atomic number is 6, we can subtract 6 from 12.01 to get the number of neutrons. This gives us a neutron count of approximately 6.01.

Therefore, The answer is B. 6 protons are in the nucleus of this element.

Learn More about nucleus here :-

https://brainly.com/question/21083478

#SPJ11

To determine the order of the reaction with respect to the ligand and substrate, we can use the method of initial rates.

For the substrate, we keep the concentration of the ligand constant at 1.0 M and vary the substrate concentration to get the following initial rates:

[substrate] (M) | [ligand] (M) | rate (M/s)
--- | --- | ---
1.0 | 1.0 | 5
5.0 | 1.0 | 25
10.0 | 1.0 | 50

When we double the substrate concentration from 5.0 M to 10.0 M, we see that the rate of the reaction also doubles. This suggests that the reaction is first order with respect to the substrate.

For the ligand, we keep the concentration of the substrate constant at 5.0 M and vary the ligand concentration to get the following initial rates:

[substrate] (M) | [ligand] (M) | rate (M/s)
--- | --- | ---
5.0 | 1.0 | 25
5.0 | 5.0 | 125
5.0 | 25.0 | 625

When we increase the ligand concentration from 1.0 M to 5.0 M, we see that the rate of the reaction increases by a factor of 5. When we increase the ligand concentration from 5.0 M to 25.0 M, we see that the rate of the reaction increases by a factor of 5 again. This suggests that the reaction is second order with respect to the ligand.

Therefore, the rate equation for this reaction is:

Rate = k [substrate]^1 [ligand]^2

where k is the rate constant.

To know more about ligands : https://brainly.com/question/27731806

#SPJ11

Of the given options, only (a) forms a weakly acidic solution when an acid and a base are combined in stoichiometrically equivalent amounts.

Ammonium chloride (NH₄Cl), a salt that can dissociate in water to release ammonium ions (NH₄⁺) and chloride ions (Cl⁻), is created when stoichiometrically equivalent amounts of ammonia (NH₃) and hydrochloric acid (HCl) are mixed. Ammonium ions can, however, also function in water as a mild acid by giving water a proton (H⁺) in order to create hydronium ions (H₃O). As a result, the final solution will have a low acidity.

The following choices represent basic or neutral solutions:

(b) Because perchloric acid (HClO₄) and lithium hydroxide (LiOH), which are both potent acids and bases, combine to produce water and lithium perchlorate (LiClO₄), a salt that does not further dissociate in water, (b) creates a neutral solution.

(c) Because hydroiodic acid (HI) and calcium hydroxide (Ca(OH)₂) are strong acids and bases, respectively, and because of their reaction to produce calcium iodide (CaI₂) and water, which do not further dissociate in water, (c) creates a basic solution.

(d) Since strontium hydroxide (Sr(OH)₂) and nitric acid (HNO₃) are both potent acids and bases, respectively, their reaction produces strontium nitrate (Sr(NO₃)₂) and water, neither of which further dissociates in water. Therefore, (d) also produces a neutral solution.

To know more about the stoichiometrically equivalent amounts refer here :

https://brainly.com/question/31327881#

#SPJ11

The molecular formula of the ions responsible for peaks at 45 and 77 in benzoic acid are C7H6O and C7H5O2, respectively.

The molecular formula is a way to count how many atoms of each element are in a compound. The empirical formula provides a simplified ratio of the elements contained in a compound. If a compound's molecular formula is not in the process of being further decreased, the empirical and molecular formulas appear to be identical.

The empirical formula of any compound will reveal the chemical. Knowing a compound's molecular weight will help you do this.   The empirical formula is always the chemical formula for a compound determined by composition analysis. The empirical formula's subscripts are integer multiples of the molecular formula.

Learn more about molecular formula here

https://brainly.com/question/14425592

#SPJ11

The time required for the mixture to reach 65% conversion of p-chlorophenyl isopropyl ether is approximately 51.2 minutes.

The rate law for the given reaction is:

Rate = [tex]k1[A]^1[B]^1[/tex]= k1([p-chlorophenyl isopropyl ether]^1)([bromine]^1)

As the reaction is second order with respect to A and first order with respect to B, the rate law can be written as:

Rate = [tex]k2[A]^2[B]^1 = k2[/tex]([p-chlorophenyl isopropyl ether]^2)([bromine]^1)

Since the reaction is taking place in a batch reactor, the rate of reaction is given by:

Rate = -(1/V)(d[A]/dt)

where V is the volume of the reactor, A is the concentration of p-chlorophenyl isopropyl ether and B is the concentration of bromine.

At 65% conversion, the concentration of p-chlorophenyl isopropyl ether will be:

[p-chlorophenyl isopropyl ether] = (1 - 0.65)(0.02 mol) = 0.007 mol

Substituting the given values in the rate law equation, we get:

k2([p-chlorophenyl isopropyl ether[tex]]^2[/tex])([bromine[tex]]^1[/tex]) = -(1/V)(d[A]/dt)

Assuming that the initial concentrations of A and B are equal, we have:

0.02 mol/L = [A] + [B]

0.018 mol/L = [B]

Substituting these values in the rate law equation, we get:

[tex]k2([0.02 mol/L]^2)([0.018 mol/L]^1) = -(1/20 L)(d[A]/dt)[/tex]

Solving for the rate of reaction, we get:

d[A]/dt = -1.368 × 10⁻⁴ mol/min

At 65% conversion, the concentration of p-chlorophenyl isopropyl ether is 0.007 mol/L. Therefore, the time required for the reaction to reach 65% conversion can be calculated as:

(0.007 mol/L) / (-1.368 × 10^-4 mol/min) = 51.2 minutes (approx.)

Therefore, the time required for the mixture to reach 65% conversion of p-chlorophenyl isopropyl ether is approximately 51.2 minutes.

Learn more about isopropyl

https://brainly.com/question/13869183

#SPJ4

Therapeutic compatibility, The synergism between calcium ion and digoxin is a therapeutic compatibility as it enhances the therapeutic effect of digoxin.

The calcium ion helps to increase the contractility of the heart muscle and can improve the effectiveness of digoxin in treating heart failure. The synergism between calcium ion and digoxin represents a therapeutic incompatibility.

This is because the combined effect of these two substances can lead to an increased risk of digoxin toxicity, which can be harmful to the patient. It is important to carefully monitor and manage the use of both calcium and digoxin in a clinical setting to avoid adverse effects.

To know more about muscle click here

brainly.com/question/6616992

#SPJ11

In the Lewis structure for SO3²⁻ where all atoms satisfy the octet rule, sulfur (S) has (i) 1 lone pair of electrons and (ii) 3 bonded pairs of electrons.

Step-by-step explanation:
1. Identify the central atom, which is sulfur (S) in this case.
2. Count the total number of valence electrons: S (6) + 3 × O (3 × 6) + 2 (for the 2⁻ charge) = 6 + 18 + 2 = 26 electrons.
3. Place a single bond between the central atom (S) and each of the three oxygen (O) atoms. This accounts for 6 electrons (3 pairs).
4. Distribute the remaining electrons (20) to complete the octets of the oxygen atoms. Each oxygen atom receives 6 more electrons, forming 3 lone pairs on each oxygen.
5. After completing the oxygen octets, there are still 2 electrons left. Place these on the central sulfur atom as a lone pair.
6. Now, S has 1 lone pair and 3 bonded pairs of electrons, satisfying the octet rule for all atoms in the SO3²⁻ ion.

To understand more about lewis structure : https://brainly.com/question/20300458

#SPJ11

"Attention" is the mental process of focusing on specific elements of our surroundings while disregarding others. It involves directing our cognitive resources towards a particular stimulus and filtering out irrelevant information.

It involves the allocation of limited processing resources to enhance the processing of relevant information and inhibit the processing of irrelevant information.

Sensation, on the other hand, refers to the process of detecting physical stimuli such as light, sound, touch, taste, and smell. Exposure refers to the act of being subjected to or experiencing something, often repeatedly. Perception refers to the process of interpreting sensory information and making sense of it.

In summary, attention is the term that specifically refers to the extent to which processing activity is devoted to a particular stimulus.

To know more about the particular stimulus refer here :

https://brainly.com/question/10832369#

#SPJ11

The net ionic equation for ammonia (NH₃) and phosphoric acid (H₃PO₄) is:

NH₃ + H₃PO₄ → NH₄+ + H₂PO₄-

The complete ionic equation, which includes all the ions in the reaction, is:

NH₃ + 3H+ + 3HO₄- → NH₄+ + 3H₂PO₄-

However, in the net ionic equation, the spectator ions (the ions that do not participate in the reaction) are removed, which are H+ and HO₄-. Therefore, the net ionic equation only includes the ions that are involved in the chemical change, which are NH₃, H₃PO₄, NH₄+, and H₂PO₄-.

Learn more about  ionic equation,

https://brainly.com/question/29299745

#SPJ4

A hill coefficient of 3 indicates that b. the binding of a ligand becomes increasingly harder with each subsequent binding.

The phenomenon in which binding of a ligand becomes increasingly harder with each subsequent binding known as positive co-operativity, where the binding of one enhances the binding of the next. Therefore, it becomes more difficult to bind the next ligand after the first and even more difficult to bind the third.

A ligand is an ion or molecule which holds the ability to donate the electrons to the central metal atom or ion so that the coordination complex can be formed as a product.

Hence, a hill coefficient of 3 indicates that b. the binding of a ligand becomes increasingly harder with each subsequent binding.

Learn more about ligand : https://brainly.com/question/27731806

#SPJ11

If the methyl red test is positive that means bacteria is capable of break down sugar .

The methyl red test is a commonly used test in microbiology to determine the ability of a bacterium to produce and maintain stable acid end products from glucose fermentation.

If a bacterium is positive on the methyl red test, it means that it is capable of breaking down glucose into acidic by-products, such as lactic acid or acetic acid.

This indicates that the bacterium is able to carry out a specific metabolic pathway and produce acid, which can have implications for its role in various environments and potential applications in biotechnology.

Learn more about methyl red test : https://brainly.com/question/5350154

#SPJ11

The aluminum rod that is not totally submerged in the calorimeter after being transferred from hot water will have a negligible effect on the final temperature of the water/solution in the calorimeter. This is because aluminum has a high thermal conductivity and will quickly transfer any heat it contains to the water/solution in the calorimeter, regardless of whether it is fully submerged or not.

However, if the amount of aluminum not submerged is significant and the experiment is sensitive, it could introduce a slight error in the temperature measurement, but this is unlikely to be significant. It is important to note that any variation in temperature due to the aluminum rod not being submerged will be minimal and will not affect the overall validity of the experiment. Therefore, it is recommended to ensure that the aluminum rod is fully submerged for consistency and accuracy in the experiment, but if it is not, it is unlikely to have a significant impact on the final temperature measurement. Hi! When an aluminum rod is not fully submerged in the calorimeter after being transferred from hot water, it will affect the final temperature of the water/solution in the calorimeter. Since the entire rod isn't in contact with the solution, less heat will be transferred from the aluminum to the solution. As a result, the final temperature of the solution will be lower than if the rod were fully submerged, leading to inaccuracies in the calculated heat exchange. To obtain accurate results, ensure the aluminum rod is fully submerged during the experiment.

Learn more about calorimeter here

https://brainly.com/question/30581696

#SPJ11

The strongest force that will determine physical properties is dipole-dipole forces.

The strongest force that will determine physical properties is hydrogen bonding.

The strongest force that will determine physical properties is London dispersion forces.

[tex]CH_3Cl[/tex]: The intermolecular forces that exist between[tex]CH_3Cl[/tex] molecules are dipole-dipole forces and London dispersion forces. The strongest force that will determine physical properties is dipole-dipole forces.

[tex]H_2[/tex]: The intermolecular force that exists between[tex]H_2[/tex] molecules is London dispersion forces. The strongest force that will determine physical properties is London dispersion forces.

HCl: The intermolecular forces that exist between HCl molecules are dipole-dipole forces and London dispersion forces. The strongest force that will determine physical properties is dipole-dipole forces.

Ne: The intermolecular force that exists between Ne atoms is London dispersion forces. The strongest force that will determine physical properties is London dispersion forces.

[tex]NH_3[/tex]: The intermolecular forces that exist between NH3 molecules are hydrogen bonding, dipole-dipole forces, and London dispersion forces. The strongest force that will determine physical properties is hydrogen bonding.

learn more about intermolecular forces

https://brainly.com/question/17111432

#SPJ11

Answer:

The puffer fish inflates itself by sucking water or air into its stomach, which causes its body to inflate and become larger.

Explanation:

(4 Fe(s) + 3 O2(g) ↔ 2 Fe2O3(s) ΔH = -1650 kJ/mol) is thermodynamically favorable is: "There are more particles (including particles in the gas state) in the reactants than in the product, thus ΔS < 0.

Because ΔH is large and negative, the reaction will be thermodynamically favorable at low temperatures."

This is because there are fewer particles in the product, which results in a decrease in entropy (ΔS < 0). Since the enthalpy change (ΔH) is large and negative, the reaction is exothermic and releases energy.

At low temperatures, the reaction is thermodynamically favorable due to the combined effects of negative ΔH and low temperatures overcoming the decrease in entropy.

To understand oxidation and thermodynamics : https://brainly.com/question/25886015

#SPJ11

Acetylsalicylic acid is a weak acid, so we need to use the Ka value to find the concentration of hydroxide ions. Ka of acetylsalicylic acid (HC₉H₇O₄) is 3.27 × 10⁻⁴ The hydroxide ion concentration of an aqueous solution of 0. 522 M hypochlorous acid is M [OH⁻-]= 2.28 ×  10⁻⁴ M

HC₉H₇O₄ + H₂O ⇌ H₃O+ + C₉H₇O₄⁻

Initial: 0.522 M 0 0

Change: -x +x +x

Equilibrium: 0.522 - x x x

Ka = [H₃O+][C₉H₇O₄⁻] / [HC₉H₇O₄]

3.27 × 10⁻⁴ = [tex]x^2[/tex] / (0.522 - x)

As x is very small compared to 0.522, we can approximate the denominator to be 0.522:

3.27 × 10⁻⁴ =[tex]x^2[/tex] / 0.522

x = 1.13 × 10⁻³ M

pOH = -log [OH⁻]

pOH = -log (1.13 × 10⁻³)

pOH = 2.95

The hydroxide ion concentration of an aqueous solution of hypochlorous acid (HOCl) can be found using the Kb value. We can use the fact that Kw = Ka × Kb to find Kb for HOCl.

Kw = Ka × Kb

1.0 × 10⁻¹⁴ = 3.0 × 10⁻⁸ × Kb

Kb = 3.33 × 10⁻⁷

HOCl + H₂O ⇌ H₃O+ + OCl⁻

Initial: 0.522 M 0 0

Change: -x +x +x

Equilibrium: 0.522 - x x x

Kb = [OH⁻][OCl⁻] / [HOCl]

3.33 × 10⁻⁷ = x² / (0.522 - x)

As x is very small compared to 0.522, we can approximate the denominator to be 0.522:

3.33 × 10⁻⁷ =[tex]x^2[/tex]/ 0.522

x = 2.28 ×  10⁻⁴ M

[OH⁻] = 2.28 ×  10⁻⁴ M

Learn more about Acetylsalicylic acid,

https://brainly.com/question/13188890

#SPJ4