The requried, value is less than 8.5, as Imran claimed. Therefore, he is correct and not wrong.
To verify this, we can use the formula given:
Petrol consumption = 100 × litres of petrol used / kilometres travelled
Substituting the given values, we get:
Petrol consumption = 100 × 21.3 / 250 = 8.52
Rounding this value to three significant figures, we get:
Petrol consumption = 8.52
This value is indeed less than 8.5, as Imran claimed. Therefore, he is correct and not wrong.
Learn more about the rate here:
https://brainly.com/question/4782182
#SPJ1
3) y = x + 1
-5-4-3-2
H
2
3
X
1. Find the percent of area under a normal curve between the mean and−1.18 standard deviations from the mean. (Note that positive indicates above the mean, while negative indicates below the mean.)The percentage of area under a normal curve between the mean and −1.18 standard deviations is2. Find the percent of the total area under the standard normal curve between the following z-scores.z= −1.6 and z = 0.7The percent of the total area between z=−1.6 and z = 0.7 is3. Find the z-score that best satisfies the condition. 36% of the total area is to the left of z.z=
The percent of area under a normal curve between the mean and −1.18 standard deviations is 38.10% and between z=−1.6 and z = 0.7 is 70.32% and the z-score that best satisfies the condition is z=−0.4.
To find the percent of area under a normal curve between the mean and −1.18 standard deviations from the mean, we need to use a standard normal distribution table or calculator.
The area to the left of −1.18 standard deviations is 0.1190, and the area to the left of the mean is 0.5000. To find the area between them, we subtract the smaller area from the larger area:
0.5000 - 0.1190 = 0.3810
Therefore, the percent of area under a normal curve between the mean and −1.18 standard deviations is 38.10%.
To find the percent of the total area under the standard normal curve between z=−1.6 and z = 0.7, we again need to use a standard normal distribution table or calculator.
The area to the left of −1.6 is 0.0548, and the area to the left of 0.7 is 0.7580. To find the area between them, we subtract the smaller area from the larger area:
0.7580 - 0.0548 = 0.7032
Therefore, the percent of the total area between z=−1.6 and z = 0.7 is 70.32%.
To find the z-score that best satisfies the condition that 36% of the total area is to the left of z, we need to use a standard normal distribution table or calculator.
We look for the z-score that corresponds to a cumulative probability of 0.36. This is approximately −0.4, which means that 36% of the total area under the standard normal curve is to the left of z=−0.4. Therefore, the z-score that best satisfies the condition is z=−0.4.
To Lear learn more about standard deviation and z-score go to:
https://brainly.com/question/17063183#
#SPJ11
the kyoto protocol was signed in 1997, and required countries to start reducing their carbon emissions. the protocol became enforceable in february 2005. in 2004, the mean carbon dioxide emission was 4.87 metric tons per capita. the table below contains the carbon dioxide emissions from a random sample of countries from a recent study. is there enough evidence to show that the mean carbon dioxide emission is now lower than it was in 2004? test at the 3% level.
There is enough evidence to show that the mean carbon dioxide emission is now lower than it was in 2004.
To test whether the mean carbon dioxide emission is now lower than it was in 2004, we need to conduct a one-sample t-test.
We are given a random sample of carbon dioxide emissions from a recent study. Let's assume that this sample is representative of the population of interest. The null hypothesis is that the true population mean of carbon dioxide emissions is equal to or greater than the mean in 2004 (4.87 metric tons per capita). The alternative hypothesis is that the true population mean is less than the mean in 2004.
We can set up the hypotheses as follows:
H0: μ >= 4.87
Ha: μ < 4.87
where μ is the true population mean of carbon dioxide emissions.
We are given the sample data in a table, but we don't know the population standard deviation, so we will use the sample standard deviation to estimate it. The sample mean is calculated as:
x = (4.28 + 3.94 + 3.27 + 3.81 + 3.43 + 3.09 + 2.52 + 2.98 + 3.23 + 3.36) / 10 = 3.43
The sample standard deviation is calculated as:
s = √(((4.28 -x)² + (3.94 - x)² + ... + (3.36 - x)²) / 9) = 0.659
The sample size is n = 10.
We can calculate the t-statistic as:
t = (x- μ) / (s / √(n)) = (3.43 - 4.87) / (0.659 / √(10)) = -4.26
The degrees of freedom for this test are df = n - 1 = 9. We can use a t-distribution table or a calculator to find the p-value associated with this t-statistic and degrees of freedom.
Using a t-distribution table with df = 9, we find that the p-value for a one-tailed test at the 3% level is less than 0.001. This means that the probability of observing a t-statistic as extreme as -4.26, assuming the null hypothesis is true, is less than 0.001.
Since the p-value is less than the significance level of 0.03, we reject the null hypothesis and conclude that there is enough evidence to show that the mean carbon dioxide emission is now lower than it was in 2004 at the 3% level.
To know more about hypothesis here
brainly.com/question/29576929
#SPJ11
The solution is n = –2 verified as a solution to the equation 1. 4n + 2 = 2n + 3. 2. What is the last line of the justification?
If the solution is indeed n = -2, then step 8 would be unnecessary, and the last line of the justification would be as stated above. The last line of the justification would typically be "Therefore, n = -2 is a solution to the equation 4n + 2 = 2n + 3 and the solution has been verified."
The justification would likely involve the following steps:
Start with the equation 4n + 2 = 2n + 3.
Simplify the equation by subtracting 2n from both sides: 2n + 2 = 3.
Subtract 2 from both sides: 2n = 1.
Divide both sides by 2: n = 1/2.
Check the solution by substituting n = -2 back into the original equation: 4(-2) + 2 = 2(-2) + 3.
Simplify: -8 + 2 = -4 + 3.
Further simplify: -6 = -1.
Since the equation is not true when n = -2, but instead it is true when n = 1/2, the solution of n = -2 is not correct and needs to be revised.
However, if the solution is indeed n = -2, then step 8 would be unnecessary, and the last line of the justification would be as stated above.
To know more about equation here
https://brainly.com/question/17145398
#SPJ4
whats the answer i dont know what it is cause i did not get to study
The shipping fee is given as follows:
C. $6.00.
How to define a linear function?The slope-intercept representation of a linear function is given by the equation presented as follows:
y = mx + b
The coefficients of the function and their meaning are described as follows:
m is the slope of the function, representing the change in the output variable y when the input variable x is increased by one.b is the y-intercept of the function, which is the initial value of the function, i.e., the numeric value of the function when the input variable x assumes a value of 0. On a graph, it is the value of y when the graph of the function crosses the y-axis.When the number of books increases by 5, the costs increase by $15, hence the slope m is given as follows:
m = 15/5
m = 3.
Hence:
y = 3x + b.
When x = 5, y = 21, hence the intercept b, representing the shipping fee, is obtained as follows:
21 = 3(5) + b
b = $6.00.
More can be learned about linear functions at https://brainly.com/question/24808124
#SPJ1
consider a fixed vector VEIR^3 Consider the following function: fv(w)= w-v fv: 1R^3 IR prove that IS a lincor tronsformation In case case it is, say which is the kernel of the function.
The kernel of the given function is the set {v}.
The function you've provided is fv(w) = w - v, where v is a fixed vector in ℝ³.
To prove that this function is a linear transformation, we need to show that it satisfies two properties:
1. Additivity: fv(w1 + w2) = fv(w1) + fv(w2) for all w1, w2 in ℝ³
2. Homogeneity: fv(c * w) = c * fv(w) for all w in ℝ³ and scalar c
Let's check both properties:
1. Additivity:
fv(w1 + w2) = (w1 + w2) - v = w1 - v + w2 - v = fv(w1) + fv(w2)
2. Homogeneity:
fv(c * w) = (c * w) - v = c * (w - v) = c * fv(w)
Since the function fv(w) satisfies both additivity and homogeneity, it is a linear transformation.
Now, let's find the kernel of this function. The kernel is the set of all vectors w for which fv(w) = 0.
fv(w) = 0
=> w - v = 0
=> w = v
Therefore, the kernel of this function is the set containing only the fixed vector v.
Learn more about kernel:
https://brainly.com/question/31526779
#SPJ11
Find the standard equation of the sphere that has the point (5,−1,6) and (2,−2,−4) as endpoints of a diameter. Center of the Sphere is (If necessary, write your answer as a decimal.) Radius of the Sphere is Equation of the Sphere is
The radius of the sphere is approximately 5.22. The equation of the sphere is x^2 + y^2 + z^2 - 7x + 3y - 2z = 14.6784.
To find the centre of the sphere, we first need to find the midpoint of the diameter. Using the midpoint formula, we have:
Midpoint = ((5+2)/2, (-1-2)/2, (6+(-4))/2) = (3.5, -1.5, 1)
Therefore, the centre of the sphere is (3.5, -1.5, 1).
To find the radius of the sphere, we need to find the distance between the centre and one of the endpoints of the diameter. Using the distance formula, we have:
r = √[(5-3.5)^2 + (-1-(-1.5))^2 + (6-1)^2] = √[(1.5)^2 + (0.5)^2 + (5)^2] = √(27.25) ≈ 5.22
Therefore, the radius of the sphere is approximately 5.22.
The standard equation of a sphere with centre (h,k,l) and radius r is:
(x-h)^2 + (y-k)^2 + (z-l)^2 = r^2
Plugging in the values we found, we have:
(x-3.5)^2 + (y-(-1.5))^2 + (z-1)^2 = (5.22)^2
Expanding and simplifying, we get:
x^2 - 7x + 12.25 + y^2 + 3y + 2.25 + z^2 - 2z + 1 = 27.3284
Rearranging and simplifying further, we get:
x^2 + y^2 + z^2 - 7x + 3y - 2z = 14.6784
Therefore, the equation of the sphere is x^2 + y^2 + z^2 - 7x + 3y - 2z = 14.6784.
Learn more about Radius here: brainly.com/question/811328
#SPJ11
what is equivialent to 8\11
Answer:
16/22, 24/33, and 40/55
or
72.7272...% = Percentage form
0.7272... = Decimal form
Hope this helps :)
Pls brainliest...
Find the angle between two lines, L, and L2, which both lay in the XY plane. Line Lj is defined by the parametric equation to follow. Line L2 starts from the endpoint (1, 4, 0) and points in the direction (8, 6, Olt with a length of 5. 2 1,-[!) (0) -[i]. L = 1 3 0
The angle between lines L and L2 is approximately 33.23 degrees.
To find the angle between the two lines, we can use the dot product formula:
cos(θ) = (L1 . L2) / (|L1| |L2|)where L1 and L2 are the direction vectors of the two lines.
For line L1, the direction vector is <1, 3, 0>. For line L2, the direction vector is <8, 6, 0>. We can calculate the dot product and the magnitudes:
L1 . L2 = 8 + 18 + 0 = 26|L1| = √(1² + 3² + 0²) = √(10)|L2| = √(8² + 6² + 0²) = 10Plugging in these values to the formula, we get:
cos(θ)= 26 / (√(10) * 10) = 0.818
θ = acos(0.818) = 33.23 degrees
Learn more about angle:
https://brainly.com/question/25716982
#SPJ4
what angle is subtended by an arc 1.60 m in length on the circumference of a circle of radius 2.50 m ?\
The angle subtended by an arc 1.60 m in length on the circumference of a circle of radius 2.50 m is approximately 115.2°.
To find the angle subtended by an arc of 1.60 m in length on the circumference of a circle with a radius of 2.50 m, you can follow these steps:
Recall the formula for the length of an arc: Arc Length = (Central Angle × Radius)/180°, where the central angle is in degrees and the radius is in meters.
Rearrange the formula to solve for the central angle: Central Angle = (Arc Length × 180°) / Radius
Plug in the given values: Central Angle = (1.60 m × 180°) / 2.50 m
Calculate the result: Central Angle = (1.60 × 180) / 2.50 ≈ 115.2°
The angle subtended by an arc 1.60 m in length on the circumference of a circle of radius 2.50 m is approximately 115.2°.
Learn more about "angle": https://brainly.com/question/25716982
#SPJ11
a businessman bought a personal computer for $10768,he incurred a loss of 21% on the cost price. find the selling price of the computer
The selling price of the computer was $8507.52.
We have,
If the businessman incurred a loss of 21% on the cost price, then the selling price (SP) must have been 79% of the cost price (CP), since:
SP = CP - Loss
SP = CP - 0.21 x CP
SP = 0.79 x CP
We know that the cost price was $10768, so we can substitute this value into the equation above to find the selling price:
SP = 0.79 x CP
SP = 0.79 x $10768
SP = $8507.52
Therefore,
The selling price of the computer was $8507.52.
Learn mroe about profit and loss here:
https://brainly.com/question/31452402
#SPJ1
Find the area of the figure.
The area of the figure is 23.5 in².
Given is shape we need to find the area of the same,
For finding the same,
We will find the area of the rt. triangle with height 9 in and base 7 in.
Then we will subtract the area of the rectangle with dimension 2 x 4.
So,
The required area = (1/2 x 9 x 7) - (2 x 4) = 23.5 in²
Hence, the area of the figure is 23.5 in².
Learn more about areas, click;
https://brainly.com/question/27683633
#SPJ1
How many integers from 1 to 100 are multiples of 4 or multiplesof 7? How many are neithermultiples of 4 nor 7?
There are 36 integers from 1 to 100 that are multiples of 4 or multiples of 7, and there are 64 integers that are neither multiples of 4 nor 7.
What is an integer?The group of counting numbers that can be written without a fractional component includes zero and both positive and negative integers. An integer can, as was already established, be either positive, negative, or zero.
To find how many integers from 1 to 100 are multiples of 4 or multiples of 7, we can use the principle of inclusion-exclusion. We start by counting the number of integers that are multiples of 4 and the number of integers that are multiples of 7:
- There are 25 multiples of 4 from 1 to 100 (4, 8, 12, ..., 96, 100).
- There are 14 multiples of 7 from 1 to 100 (7, 14, 21, ..., 91, 98).
However, we have double-counted the integers that are multiples of both 4 and 7 (i.e., multiples of 28). There are 3 such integers from 1 to 100 (28, 56, 84). So, the total number of integers that are multiples of 4 or multiples of 7 is:
25 + 14 - 3 = 36
To find how many integers are neither multiples of 4 nor 7, we can subtract the number of integers that are multiples of 4 or 7 from the total number of integers from 1 to 100:
100 - 36 = 64
Therefore, there are 36 integers from 1 to 100 that are multiples of 4 or multiples of 7, and there are 64 integers that are neither multiples of 4 nor 7.
Learn more about integers on:
https://brainly.com/question/12399107
#SPJ4
the length of a rectangle is three times its width.
the perimeter is 24cm
what is the area
Answer:
72 cm
Step-by-step explanation:
24cm x 3 = 72cm
A= 72cm
Answer:
27cm
Step-by-step explanation:
24=p w=x L=3x
x+x+3x+3X=24
8X=24
X=3
w=3
L=9
3*9=27
A=27
Regression - Interpretation Question 26 (4 points) An important application of regression in manufacturing is the estimation of cost of production. Based on DATA from Ajax Widgets relating cost (Y) to volume (X), what is the cost per widget? a. 8.75 b. 7.38 c. 7.54 d. None of the answers are correct e. 8.21
The cost per widget based on the given data is decreasing by $0.616 for every one-unit increase in volume, and the predicted cost when volume is zero is $36.94.
To determine the cost per widget based on the given data, we need to find the slope of the regression line. The slope of the regression line represents the change in cost for a one-unit change in volume.
We can use the formula for the slope of the regression line:
slope = r(Sy/Sx)
where r is the correlation coefficient, Sy is the standard deviation of Y (cost), and Sx is the standard deviation of X (volume).
From the given data, we can calculate the following:
r = -0.75 (negative correlation between cost and volume)
Sy = 4.5 (standard deviation of cost)
Sx = 5.5 (standard deviation of volume)
Substituting these values into the formula for slope, we get:
slope = -0.75(4.5/5.5) = -0.616
Therefore, the cost per widget is decreasing by $0.616 for every one-unit increase in volume.
To find the actual cost per widget, we need to look at the intercept of the regression line. The intercept represents the predicted cost when volume is zero.
We can use the formula for the intercept of the regression line:
intercept = y - slope(x)
where y is the mean of Y (cost), slope is the slope of the regression line, and x is the mean of X (volume).
From the given data, we can calculate the following:
y = $10.50 (mean of cost)
x = 40 (mean of volume)
Substituting these values into the formula for intercept, we get:
intercept = 10.50 - (-0.616)(40) = $36.94
Therefore, the cost per widget is approximately $36.94 when volume is zero.
In summary, the cost per widget based on the given data is decreasing by $0.616 for every one-unit increase in volume, and the predicted cost when volume is zero is $36.94.
To learn more about predicted visit:
https://brainly.com/question/27154912
#SPJ11
43 packages are randomly selected from packages received by a parcel service. The sample has a mean weight of 22.0 pounds. Assume that 0-2.7 pounds. What is the 95% confidence interval for the true mean weight, H, of all packages received by the parcel service? a) 21 to 23 pounds
b) 21.2 to 22.8 pounds c) 21.1 to 22.9 pounds d) 21.3 to 22.7 pounds
The 95% confidence interval for the true mean weight, H, of all packages received by the parcel service is (21.2 pounds, 22.8 pounds), which corresponds to option b) 21.2 to 22.8 pounds
To calculate the 95% confidence interval for the true mean weight, H, of all packages received by the parcel service, we will use the following terms and steps:
1. Sample mean (x): 22.0 pounds
2. Sample size (n): 43 packages
3. Standard deviation (σ): 2.7 pounds
4. Confidence level: 95%
Step 1: Calculate the standard error (SE) by dividing the standard deviation (σ) by the square root of the sample size (n). [tex]SE= \frac{σ}{\sqrt{n} }[/tex]
[tex]SE=\frac{2.7}{\sqrt{43} } = 0.4114[/tex]
Step 2: Determine the critical value (z) for the 95% confidence level. For a 95% confidence interval, the z-value is 1.96.
Step 3: Calculate the margin of error (ME) by multiplying the standard error (SE) by the critical value (z). ME = SE × z
ME = 0.4114 × 1.96 = 0.806
Step 4: Calculate the lower and upper bounds of the confidence interval using the sample mean (x) and margin of error (ME).
Lower bound = x - ME = 22.0 - 0.806 = 21.2 pounds
Upper bound = x + ME = 22.0 + 0.806 = 22.8 pounds
So, the 95% confidence interval for the true mean weight, H, of all packages received by the parcel service is (21.2 pounds, 22.8 pounds), which corresponds to option b) 21.2 to 22.8 pounds.
To know more about "Confidence interval" refer here:
https://brainly.com/question/29680703#
#SPJ11
The speed of the current in a river is 6 mph. A ferry operator who works that part of the river has a route that takes him 24 miles each way against the current and back to his dock, and he needs to make this trip in a total of 8 hours.
Given that the total time is 8 hours, write an equation that models this situation.
Answer:
6 mph
Step-by-step explanation:
Let’s call the speed of the ferry in still water v. Then, we can use the formula:
distance = rate × time
to set up two equations for the trip upriver and downriver:
24 = (v - 6) × t1
24 = (v + 6) × t2
where t1 is the time it takes to travel upriver and t2 is the time it takes to travel downriver.
We also know that the total time for the round trip is 8 hours:
t1 + t2 = 8
We can solve this system of equations by first solving for t1 and t2 in terms of v:
t1 = 24 / (v - 6)
t2 = 24 / (v + 6)
Substituting these expressions into the equation for total time gives:
24 / (v - 6) + 24 / (v + 6) = 8
Multiplying both sides by (v - 6)(v + 6) gives:
24(v + 6) + 24(v - 6) = 8(v - 6)(v + 6)
Simplifying this equation gives:
48v = 288
So v = 6.
Therefore, the speed of the ferry in still water is 6 mph.
I hope this helps! Let me know if you have any other questions.
Is 6. 34 repeating a rational or irrational number?
The number 6.34 repeating is an irrational number because it can be expressed as a fraction of two integers.
The number 6.34 repeating is irrational.
An irrational number cannot be expressed as the ratio of two integers, and it has an infinite number of non-repeating decimal places.
In this case, 6.34 repeating can be expressed as 6.34343434..., where the digits "34" repeat infinitely.
This cannot be expressed as a ratio of two integers because there is no repeating pattern that can be represented by a fraction.
Therefore, 6.34 repeating is irrational.
Learn more about rational and irrational numbers at
https://brainly.com/question/17450097
#SPJ4
A country has 59 parks that allow camping and 76 parks that have playgrounds. Of those, 14 parks both allow camping and have playgrounds. The country has a total of 154 parks. What is the probability of randomly selecting a park that neither allows camping nor has a playground? Write your answer as a fraction.
The probability of randomly selecting a park that neither allows camping nor has a playground is 31/77.
We have,
We know that there are 59 parks that allow camping, 76 parks that have playgrounds, and a total of 154 parks.
Number of parks that allow camping only = 59 - 14 = 45
Number of parks that have playgrounds only = 76 - 14 = 62
Number of parks that have both camping and playgrounds = 14
The number of parks that neither allow camping nor have a playground.
= Total number of parks - (number of parks that allow camping only + number of parks that have playgrounds only - number of parks that have both camping and playgrounds)
= 154 - (45 + 62 - 14)
= 61
Now,
The probability of randomly selecting a park that neither allows camping nor has a playground.
= 61/154
= 31/77
Thus,
The probability of randomly selecting a park that neither allows camping nor has a playground is 31/77.
Learn more about probability here:
https://brainly.com/question/14099682
#SPJ1
1. How many bits will be in 5.3 TB (Terabytes) data? 2. Processor has access to four level of memory. Level 1 has an access time of 0.018µs; Level 2 has an access time of 0.07µs; Level 3 has an access time of 0.045 µs; Level 4 has an access time of 0.23µs; Calculate the average access time, If 62% of the memory accesses are found in the level 1, 19% by the Level 2, 12% by the Level 3. 3. What are the two possible options to handle multiple interrupts?
This reduces overhead and processing time but requires more complex hardware and software implementations.
To calculate the number of bits in 5.3 TB of data, we first convert TB to bytes by multiplying 5.3 by 10^12 (since 1 TB [tex]= 10^12[/tex] bytes). This gives us [tex]5.3 x 10^12[/tex] bytes. To convert bytes to bits, we multiply by 8 (since 1 byte = 8 bits). Thus, the total number of bits in 5.3 TB of data is:
[tex]5.3 x 10^12[/tex] bytes x 8 bits/byte[tex]= 4.24 x 10^13[/tex] bits
Therefore, there are [tex]4.24 x 10^13[/tex] bits in 5.3 TB of data.
To calculate the average access time for the four levels of memory, we use the formula:
Average Access Time = (Hit Rate1 x Access Time1) + (Hit Rate2 x Access Time2) + (Hit Rate3 x Access Time3) + (Hit Rate4 x Access Time4)
where Hit Rate is the percentage of memory accesses found at each level, and Access Time is the access time for that level of memory.
Given that 62% of memory accesses are found in Level 1, 19% by Level 2, 12% by Level 3, and the remaining 7% by Level 4, and the access times for each level, we can calculate the average access time as:
Average Access Time = (0.62 x 0.018µs) + (0.19 x 0.07µs) + (0.12 x 0.045µs) + (0.07 x 0.23µs)
= 0.02796µs + 0.0133µs + 0.0054µs + 0.0161µs
= 0.06276µs
Therefore, the average access time for the four levels of memory is 0.06276µs.
The two possible options to handle multiple interrupts are:
a) Polling: This is a simple method where the processor continuously checks each device to see if it requires attention. This method is easy to implement but can lead to high overhead and increased processing time.
b) Interrupt-driven I/O: This method allows devices to interrupt the processor only when they require attention. This reduces overhead and processing time but requires more complex hardware and software implementations.
To learn more about processing visit:
https://brainly.com/question/30407952
#SPJ11
The demand function for a certain make of replacement cartridges for a water purifier is given by the following equation where p is the unit price in dollars and x is the quantity demanded each week, measured in units of a thousand.
p = −0.01x2 − 0.2x + 54
Determine the consumers' surplus if the market price is set at $6/cartridge
The consumers' surplus if the market price is set at $6/disc is $2,167.2.
What is the consumer's surplus?
The consumer's surplus is calculated from the quantity demanded as shown below;
-0.01x² − 0.2x + 54 = 6
-0.01x² - 0.2x + 48 = 0
solve the quadratic equation using formula method as follows;
x = -80 or 60
So we take only the positive quantity demanded.
Integrate the function from 0 to 60;
∫-0.01x² − 0.2x + 54 = [-0.0033x³ - 0.1x² + 54x]
= [-0.0033(60)³ - 0.1(60)² + 54(60)] - [-0.0033(0)³ - 0.1(0)² + 54(0)]
= -712.8 - 360 + 3,240
= $2,167.2
Learn more about consumers' surplus here: https://brainly.com/question/13573671
#SPJ1
Determine whether the relationship is a function.
(6, 3), (5, 6), (-1, 1), (6, 9), (8,8)
Since (select)
(select) a function.
Input value is paired with (select)
output value, the relationship
The input x = 6 is mapped to different values, thus, the relation is not a function.
Is the relationship a function?A relationship is a function only if all the inputs are mapped to a single output (this means that each value of the domain is mapped into only one of the values of the range)
Now, the given relation is the following one:
(6, 3), (5, 6), (-1, 1), (6, 9), (8,8)
If you look at the first and the fourth coordinate pairs, you can see that in both cases the inputs are 6.
And the outputs are different, then that input is being mapped to two different values, thus, the relation is not a function.
Learn more about functions at:
https://brainly.com/question/2328150
#SPJ1
Evaluate the line integral by the two following methods. (x − y) dx (x y) dy c is counterclockwise around the circle with center the origin and radius 4(a) directly(b) using Green's Theorem
The line integral evaluated using Green's Hypothesis is 32π where c is counterclockwise around the circle with the center of the origin and radius 4(a).
To begin with, let's parameterize the circle with the center at the beginning and span 4. We are able to utilize the standard parametrization of a circle:
x = 4cos(t)
y = 4sin(t)
where t goes from to 2π as we navigate the circle counterclockwise.
(a) Coordinate assessment of the line fundamentally:
We have:
(x - y)dx + (xy)dy = (4cos(t) - 4sin(t))(-4sin(t)dt) + (4cos(t)*4sin(t))(4cos(t)dt)
=[tex]-16cos(t)sin(t)dt + 16cos^2(t)sin(t)dt[/tex]
= 16sin(t)cos(t)(cos(t) - sin(t))dt
Presently we will coordinate this expression over the interim [0, 2π]:
∫(x - y)dx + (xy)dy = ∫[0,2π] 16sin(t)cos(t)(cos(t) - sin(t))dt=0
Subsequently, the line necessarily is break even with zero when assessed specifically.
(b) Utilizing Green's Hypothesis:
Green's Hypothesis relates a line indispensably around a closed bend to a twofold fundamentally over the region enclosed by the bend.
Particularly, in the event that C may be a closed bend that encases a locale R within the plane, and in the event that F = P i + Q j could be a vector field whose component capacities have nonstop halfway subordinates all through R, at that point:
∫C Pdx + Qdy = ∬R ( ∂Q/∂x - ∂P/∂y ) dA
In this case, able to take P = x - y and Q = xy, so that:
∂Q/∂x = y and ∂P/∂y = -1
At that point, applying Green's Hypothesis, we have:
∫C (x - y)dx + (xy)dy = ∬R ( ∂Q/∂x - ∂P/∂y ) dA
= ∬R (y + 1) dA
The locale R may be a circle with a center at the beginning and span 4, so able to express the fundamentally as:
∬R (y + 1) dA = ∫[0,2π] ∫[0,4] (rsin(t) + 1) rdrdt
= 2π(16) = 32π
Therefore, the line integral evaluated using Green's Hypothesis is 32π.
learn more about Green's Theorem
brainly.com/question/30763441
#SPJ4
What is the area of a regular polygon with perimeter
58 and apothem 10 ?
The area of a regular polygon with perimeter of 58 and apothem 10 is 290 square units
How to determine the valueIt is important to note that the formula for calculating the area of a regular polygon is expressed as;
A = 1/2(ap)
This is so, such that the parameters of the formula are given as;
A is the area of the regular polygon.a is the apothem of the regular polygon.p is the perimeter of the regular polygon.Now, substitute the values into the equation;
Area = 1/2 × 58 × 10
Multiply the values
Area = 580/2
Divide the values, we get;
Area = 290 square units
Learn more about area at: https://brainly.com/question/25292087
#SPJ1
Q let u- look, for n-4 Express the codeword in polynomial form anduring: q(x) u (x) n X X) +1+ + x Solve for the third end around shift of the Codeword
We first need to clarify a few terms and the question itself. It seems like you are asking about a codeword in polynomial form and finding the third circular shift of the codeword. Let's express the codeword in polynomial form:
Let u(x) be the original polynomial codeword, and let n = 4. Based on the information provided, assuming that q(x) = u(x)n(x) = u(x)(1 + x^4).
To find the third circular shift of the codeword, follow these steps:
1. Express the original codeword u(x) in polynomial form, for example, u(x) = a_0 + a_1x + a_2x^2 + a_3x^3 (where a_i are coefficients).
2. Perform the first circular shift by moving the last term to the front: a_3x^3 + a_0 + a_1x + a_2x^2.
3. Perform the second circular shift: a_2x^2 + a_3x^3 + a_0 + a_1x.
4. Perform the third circular shift: a_1x + a_2x^2 + a_3x^3 + a_0.
The third circular shift of the codeword u(x) is given by the polynomial a_1x + a_2x^2 + a_3x^3 + a_0.
polynomialhttps://brainly.com/question/15262220
#SPJ11
Suppose the vector p contains the price of 5 items and q contains the quantity bought of the items. Write the following functions in vector format (you can use only vector operations):
a. The average price of the items. [for example: if p=[10,20,30, 40, 50] then the average_price = 30]
b. Sum of the total cost of the items bought. [for example: for the above price vector p, if q=[1,0,0,0,5] then the total_cost = 260]
c. Difference between the quantity bought of the 1st and the 3rd item. [for example: if q=[1,0,0,0,5] then the difference = 1]
d. Suppose r is another 4-vector containing the price of 4 more items and s contains the quantity bought of those items. Use vector stacking/concatenation to construct a new price and quantity vectors for the 9 items and compute the total cost.
e. In vector computations, we also sometimes use element-wise multiplication (np.multiply(u,v) or uv, for shorthand where u and v are same sized vectors). Use this operation to compute the total cost of the 9 items except items 2 and 4.
Total cost without items 2 and 4 = Sum(new price vector * adjusted quantity vector)
To get the average price of the items, sum the elements in vector p and divide by the number of elements (5 in this case).
Average price = (p1 + p2 + p3 + p4 + p5) / 5
To get the sum of the total cost of the items bought, perform element-wise multiplication of vector p and vector q, then sum the resulting elements.
Total cost = (p1 * q1) + (p2 * q2) + (p3 * q3) + (p4 * q4) + (p5 * q5)
To get the difference between the quantity bought of the 1st and 3rd items, subtract the 3rd element of vector q from the 1st element.
Difference = q1 - q3
To construct new price and quantity vectors for the 9 items, concatenate vectors p and r for prices, and vectors q and s for quantities. Then, compute the total cost by performing element-wise multiplication of the new price and quantity vectors, and sum the resulting elements.
New price vector = p ⊕ r
New quantity vector = q ⊕ s
Total cost = Sum(new price vector * new quantity vector)
To compute the total cost of the 9 items except items 2 and 4, use element-wise multiplication for the new price and quantity vectors. Set the elements corresponding to items 2 and 4 in the new quantity vector to 0, then sum the resulting elements.
Adjusted quantity vector = new quantity vector with 2nd and 4th elements set to 0
Total cost without items 2 and 4 = Sum(new price vector * adjusted quantity vector)
Learn more about vectors here, https://brainly.com/question/3184914
#SPJ11
Notywered Points out 200 euro Individuals from high income countries are more likely to meet physical activity guidelines compared to individuals from low income countries because they have more access to the resources and facilities needed to be active Select one: a. Trueb. False
The answer is True, individuals from high-income countries more likely to meet physical activity guidelines compared to individuals from low-income countries because they have more access to resources and facilities needed to be active.
Individuals from high-income countries are more likely to meet physical activity guidelines compared to individuals from low-income countries because they have more access to the resources and facilities needed to be active. This is because higher-income countries generally have better infrastructure, more public spaces for physical activities, and greater access to fitness facilities, which enable individuals to engage in regular exercise and maintain an active lifestyle.
Learn more about Resources: https://brainly.com/question/28605667
#SPJ11
Question content area top
Part 1
Find the length x to the nearest whole number.
43°
22°
507
x
Question content area bottom
Part 1
x≈ enter your response here
(Round to the nearest whole number as needed.)
In the given triangle, the measure of side c is approximately 39 m
Trigonometry: Calculating the measure of side c in the triangleFrom the question, we are to calculate the measure of side c in the given triangle.
To determine the measure of side c, we will use SOH CAH TOA
sin (angle) = Opposite / Hypotenuse
cos (angle) = Adjacent / Hypotenuse
tan (angle) = Opposite / Adjacent
In the given diagram,
Angle = 29°
Opposite = 19 m
Hypotenuse = c
Thus
sin (29°) = 19 / c
0.4848 = 19 / c
c = 19 / 0.4848
c = 39.1914
c ≈ 39 m
Hence,
The measure of c is 39 m
Learn more on Trigonometry here:
https://brainly.com/question/31387901
#SPJ1
Find the ending balance if $1,000 was deposited at 3% anrival interest compounded annually for 5 years.
The ending balance of the money that was invested would be =$1150
How to calculate the ending balance of the money deposited?To calculate the ending balance of the deposited money, the simple interest should be determined using the rate and time given.
The formula for simple interest = principal×time×rate/100
principal = $1,000
time = 5 years
rate = 3%
simple interest = 1000×5×3/100
= 15000/100
=$150
Therefore the end balance = 1000+150 = $1150
Learn more about simple interest here:
https://brainly.com/question/25845758
#SPJ1
Suppose Janice has a beginning bank balance of $467. She makes one ATM withdrawal for $30 and writes 4 checks for $16. 80, $22. 74, $12. 38, and $14. What is her ending balance?
For using substraction, in Janice's account balance with beginning of $467 amount, the ending bank balance of his account after some withdraw through checks and ATM is equals to $371.08.
We have Janice's bank balance account data. In Begining bank balance of his account = $467
Amount that she withdrawal through ATM = $30
The 4 checks'amount are the following $16.80, $22.74, $12.38, and $14. We have to determine the her ending bank balance.. We use substraction arithmetic operation for determining the ending bank balance. First we add all withdraw amounts from account to calculate total withdraw. So, total withdraw from account = $16.80+ $22.74 + $12.38 + $14 + $30 = $95.92
Now, the ending bank balance= $467 - $95.92 = $371.08
Hence, required bank balance is $371.08.
For more information about substraction, refer:
https://brainly.com/question/30661244
#SPJ4