the physician orders digoxin 0.25 mg po daily. the pharmacy supplies the following medication. the dosage strength of the digoxin can be expressed as: ? m g 1 t a b l e t

Answer:

M<1 would be 79 and M<2 would be 101

Step-by-step explanation:

Answer:

To find the absolute change in population from 2007 to 2009, we can subtract the initial population in 2007 from the final population in 2009:

Absolute change = Final population - Initial population

= 6,200 - 3,900

= 2,300 people

Therefore, the absolute change in population from 2007 to 2009 is 2,300 people.

To find the percent increase (relative change) in population, we can use the formula:

Percent increase = (Absolute change / Initial population) x 100%

Substituting the values given in the problem, we get:

Percent increase = (2,300 / 3,900) x 100%

= 58.97%

Therefore, the population increased by approximately 58.97% from 2007 to 2009. Rounded to the nearest tenth of a percent, the percent increase is 59.0%.

Answer:

d

Step-by-step explanation:

Answer:

Step-by-step explanation:

This is a geometric means problem. 6 is the altitude, which belongs to both of those smaller triangles; thus, it is the geometric means. We set up the proportion like this:

[tex]\frac{8}{6} =\frac{6}{b+3}[/tex] and we cross multiply to solve.

8(b + 3) = 36 and

8b + 24 = 36 and

8b = 12 so

b = 3/2 or 1.5

The equation of the quadratic function is f(x) = (x + 5)² - 2

A quadratic function is a second-degree polynomial function of one variable, which can be written in the form f(x) = ax^2 + bx + c, where a, b, and c are constants and x is the variable.

From the question, we have the table of values which represents a quadratic function f(x).

A quadratic equation is represented as

f(x) = a(x - h)² + k

Where, Vertex = (h, k)

If we plot the graph according to the given table, the vertex will be,

(h, k) = (-5, -2)

Substitute, (h, k) = (-5, -2) in f(x) = a(x - h)² + k

So, we have, f(x) = a(x + 5)² - 2

Also, from the graph, we have the point (0, 23)

This means that

a(0 + 5)² - 2 = 23

25a = 25

a = 1

Substitute a = 1 in f(x) = a(x + 5)² - 2

f(x) = (x + 5)² - 2

Hence, the equation is f(x) = (x + 5)² - 2

To know more about polynomial, visit:

https://brainly.com/question/1496352

#SPJ1

Answer:

After one year, the amount in the bank account will be:

$200 + ($200 x 0.05) = $200 + $10 = $210.

Therefore, the total in the bank account after 1 year is $210.

To prove these statements, we will use the formulas for the volume and surface area of a sphere and a cylinder.
The volume of a sphere is given by the formula V = 4/3 πr³, where r is the radius of the sphere.
The volume of a cylinder is given by the formula V = πr²h, where r is the radius of the base and h is the height of the cylinder.

(a) If a sphere is inscribed in a right circular cylinder whose height is equal to the diameter of the sphere, then the height of the cylinder is 2r and the radius of the base is r. Therefore, the volume of the cylinder is
V = πr²(2r) = 2πr³.
Now, we can compare the volume of the cylinder to the volume of the sphere:
V_cylinder/V_sphere = (2πr³)/(4/3 πr³) = (2/4)(3/1) = 3/2.
Therefore, the volume of the cylinder is 3/2 the volume of the sphere.
(b) The surface area of a sphere is given by the formula A = 4πr².
The surface area of a cylinder, including its bases, is given by the formula
A = 2πrh + 2πr², where r is the radius of the base and h is the height of the cylinder.
If a sphere is inscribed in a right circular cylinder whose height is equal to the diameter of the sphere, then the height of the cylinder is 2r and the radius of the base is r. Therefore, the surface area of the cylinder is
A = 2πr(2r) + 2πr² = 4πr² + 2πr² = 6πr².
Now, we can compare the surface area of the cylinder to the surface area of the sphere:
A_cylinder/A_sphere = (6πr²)/(4πr²) = (6/4) = 3/2.
Therefore, the surface area of the cylinder, including its bases, is 3/2 the surface area of the sphere.

To know more about volume and surface area refer here:

https://brainly.com/question/15585435

#SPJ11

Answer:

The volume of the cake is:

12 inches x 9 inches x 2 inches = 216 cubic inches

Dividing the volume of the cake by the number of pieces, we get:

216 cubic inches / 18 = 12 cubic inches per piece

Therefore, the volume of each piece is 12 cubic inches.

Answer:

12 inches cubed

Step-by-step explanation:

First we have to find the total volume so we can split it up. We can do this by using the formula LWD = V, where l = length, w = width, and d = depth.

Here, the length is 12, the height is 2, and the depth is 9. We apply the formula:

(12)(2)(9) = 216

Now, we have to split it into 18 separate pieces. We can do this by dividing the total volume (216 inches cubed) by 18.

216/18 = 12

Therefore, each equal piece will be 12 inches cubed

According to the information, the scale that you would use for the pictogram would be 10 for each symbol.

To choose the most appropriate pictogram for the information in the table, we must take the data into account. In this case, we must find a divisor number of all the numbers to take it as the value of the scale. In this case we can take 10, because it divides all the numbers as shown below:

According to the above, 8 sports symbols, 4 reading symbols, 7 game symbols and 6 music symbols should be used to represent the values, taking into account that each symbol is equal to 10 units.

Learn more about pictograph in: https://brainly.com/question/768035

#SPJ1

The best histogram to represent the data collected by the surfer is a frequency polygon.

A frequency polygon is a line graph that shows the frequency distribution of a set of data points. It is used to compare the data points and identify any trends or patterns in the data.

The x-axis of the histogram represents the tide height in feet and the y-axis represents the frequency, or the number of days the tide rose to that level. As can be seen from the data provided, the tide height varied from 5-24 feet over the 15-day period, so this is the range of values that should be used for the x-axis. The frequency of each tide height is then calculated and plotted on the y-axis.

To create the frequency polygon, the first step is to create a frequency table. The next step is to plot the data points on the graph, connecting them with straight lines. The final step is to draw a line to connect the first and last data points.

The resulting frequency polygon is a good representation of the data because it clearly shows the range of tide heights over the 15-day period and the frequency of each height.

A frequency polygon histogram best represents the data collected by the for how far the tide rose, in feet, up the beach over a 15-day period.

Know more about histogram here:

https://brainly.com/question/2962546

#SPJ11

Answer:

Step-by-step explanation:

Answer is D I hope i helped

Speed cubing is a competitive activity in which participants attempt to solve Rubik's Cubes and other twisty puzzles as quickly as possible.

In speed cubing competitions, competitors race against the clock to solve the puzzles in the shortest amount of time. Speed cubing became popular in the early 2000s, largely due to the internet and online communities dedicated to the hobby. These online forums provided a platform for cubers to share techniques, compete with one another, and organize local competitions. With the growth of the internet, speed cubing quickly spread around the world and became a global phenomenon. The first world championship for speed cubing was held in 1982, but the competition did not gain widespread attention until the early 2000s. Today, there are numerous international organizations dedicated to organizing speed cubing competitions, including the World Cube Association (WCA), which hosts events for several different types of twisty puzzles, such as the 2x2, 3x3, 4x4, and 5x5 Rubik's cubes, as well as other popular puzzles like the Pyraminx and Megaminx. Speed cubing has become a highly competitive and popular activity,

To learn more about Rubik's cubes click here

brainly.com/question/22645392

#SPJ4

The hotel had 289 guests on the day in question. The z-score is a measure of how many standard deviations a data point is away from the mean of the distribution.

In this case, we are given that the number of guests in a hotel per day follows a normal distribution with a mean of 220 and a standard deviation of 30, and that the z-score of the number of guests on a particular day was 2.3.

Using the formula for z-score, we have:

z = (x - mu) / sigma

where x is the number of guests on the given day, mu is the mean of the distribution, and sigma is the standard deviation of the distribution.

Substituting the given values, we have:

2.3 = (x - 220) / 30

Multiplying both sides by 30, we get:

69 = x - 220

Adding 220 to both sides, we get:

x = 289

Therefore, the hotel had 289 guests on the day in question.

Find out more about standard deviations

brainly.com/question/19091705

#SPJ1

The correct option is A. m∠X = 45° as the triangles ABC and XYZ are congruent.

Congruent triangles are two triangles that have the same shape and size. In other words, if two triangles are congruent, then all their corresponding sides and angles are equal. Some methods that allow us to compare the lengths of corresponding sides and the measures of corresponding angles in the two triangles and determine whether they are equal includes: SSS (side-side-side), SAS (side-angle-side), ASA (angle-side-angle), AAS (angle-angle-side), or HL (hypotenuse-leg).

The angle m∠A corresponds to the angle m∠X given that the triangles ABC and XYZ are congruent.

In conclusion, the correct option for the congruent triangles is A. m∠X = 45°.

Know more about congruent triangles here:https://brainly.com/question/14285697

#SPJ1

The only value of x for which f(x) = 0 is x = 36. So, f(x) = -x + 36 does not have a real root, since there is no value of x that makes the function equal to zero.

What is a function ?

A function is a mathematical concept that describes the relationship between a set of inputs (domain) and a set of outputs (range), such that each input has a unique output. In other words, it is a rule that assigns to each input exactly one output.

A real root of a function refers to a value of x for which the value of the function is equal to zero. So, to determine whether f(x) = -x + 36 has a real root, we need to find the value(s) of x for which f(x) = 0.

Setting f(x) = 0, we have:

-x + 36 = 0

Adding x to both sides, we get:

36 = x

Therefore, the only value of x for which f(x) = 0 is x = 36. So, f(x) = -x + 36 does not have a real root, since there is no value of x that makes the function equal to zero.

To learn more about Function from given link.

https://brainly.com/question/12431044

#SPJ1

Answer:

A = 45 units²

Step-by-step explanation:

the lined figure is composed of a rectangle and a triangle

area of rectangle WFSC is calculated as

area = length × width

       = FW × WC

      = 2 × 9

     = 18 units²

the area of Δ is calculated as

area = [tex]\frac{1}{2}[/tex] base × perpendicular height

       = [tex]\frac{1}{2}[/tex] × FS × perpendicular length from N to base FS

       = [tex]\frac{1}{2}[/tex] × 9 × 6

      = 4.5 × 6

      = 27 units²

total area (A) is then the sum of the 2 figures , that is

A = 18 + 27 = 45 units²

The third term of the arithmetic sequence presented is given as follows:

14.

An arithmetic sequence is a sequence of numbers in which each term is obtained by adding a constant value, called the common difference (d), to the previous term.

From the sequence in this problem, the terms are given as follows:

More can be learned about arithmetic sequences at https://brainly.com/question/6561461

#SPJ1

Answer: 9.42477796077 square yards

Step-by-step explanation:

Cone Surface Area Calculation

surface area of cone slant height is 2 radius is 1

To find the surface area of a cone, we need to know the radius and slant height of the cone.

In this case, we are given that the radius (r) is 1, and the slant height (l) is 2. We can use the Pythagorean theorem to find the height (h) of the cone:

l^2 = r^2 + h^2

2^2 = 1^2 + h^2

4 = 1 + h^2

h^2 = 3

h = sqrt(3)

Now we can use the formula for the surface area of a cone:

A = πr^2 + πrl

Substituting the values we know:

A = π(1)^2 + π(1)(2)

A = π + 2π

A = 3π

So the surface area of the cone is 3π

3 times Pi = 9.42477796077

ChatGPT

.

The angle between the beam and the road is equal to 5.71°.

A headlamp is a lamp that is mounted on the front of a car to light the way. Although headlights and headlamps are frequently used interchangeably, in the most formal sense, headlight refers to the device's beam of light and headlamp to the device itself.

We given that :- h= 2inch and r= 20.0feets.

where, h is beam drops and r is the headlights distance.

To find the angle between the beam and the road we have to use the equation:-

tan theta = [tex]\frac{h}{r} = \frac{2 inch}{20.0 ft} = \frac{1}{10} = 0.1[/tex]

Calculating tan theta to find theta which is an angle between the beam and the road.

Theta= [tex]tan^{-1} (0.1)= 5.71[/tex]

hence, the angle between the beam and the road is 5.71 degree.

To know more about angle go through:-

https://brainly.com/question/25716982

#SPJ1

+----------------+

|  0  |  1  | -1  |

+-----+-----+-----+

|  2  | -2  |  3  |

+-----+-----+-----+

| -3  |  4  | -4  |

+-----+-----+-----+

 o            o

The zero pairs are (-2, 2) and (-4, 4), and I've circled them in the model above.

To draw a model using integer chips and circle the zero pairs, start by laying out the positive and negative integer chips side by side in a line. The negative numbers should be on the left and the positive numbers should be on the right. Next, take a second line of chips, also with negative numbers on the left and positive numbers on the right, and arrange it so that the chips on the first line line up with the corresponding chips on the second line. For example, the negative 3 chip on the first line should be paired with the positive 3 chip on the second line. The same should be done for all other chips. Finally, circle any pairs of chips where the sum of the two numbers is equal to 0. This will indicate that they are zero pairs.

For such more questions on integer chips:

brainly.com/question/15327444

#SPJ11

In the illustration, there are 2 9-point stars and 8 5-point stars.

Let x be the number of 5-pointed stars and y be the number of 9-pointed stars. Each 5-pointed star has 5 points and each 9-pointed star has 9 points, so the total number of points in the drawing is:

5x + 9y = 66

There are two variables in the equation, so we need another equation to solve for x and y. The problem states that there are a total of 10 stars in the drawing, so:

x + y = 10

We can represent this system of linear equations using a matrix:

[5 9] [x] [66]

[1 1] [y] = [10]

This is a matrix equation of the form Ax = b, where A is the coefficient matrix, x is the variable matrix, and b is the constant matrix. We can solve for x and y by finding the inverse of the coefficient matrix A:

A^-1 = 1/(5-9) [-9 5]

[ 1 -1]

Multiplying both sides by A^-1, we get:

x = A^-1 b

x = 1/(5-9) [-9 5] [66]

[1 -1] [10]

x = [-3 8]

Therefore, there are 8 5-pointed stars and 2 9-pointed stars in the drawing.

To learn more about system of linear equations refer to:

brainly.com/question/19549073

#SPJ4

Answer:

subtotal: $23.45

tip: $4.22

total: $27.67

Step-by-step explanation:

7.99+1.00+8.99+2.49+1.99+0.99=$23.45

23.45x0.18=$4.22

23.45+4.22=$27.67

Over the course of the 6-year loan, Jack will have paid a total of $32,741.19.Jack took out a 6-year loan for $25,000 to purchase a vehicle.

The loan is compounded monthly, meaning the interest accrued on the loan is added to the total loan balance each month. At the end of the 6-year loan, Jack will have paid a total of $32,741.19.
To calculate the total amount of the loan, we can use the formula:
Total Amount Paid = Principal + Interest
The principal of the loan is $25,000 and the interest rate is 6.25%, compounded monthly. The interest rate can be broken down into a monthly rate of 0.5208% (6.25/12).
Total Amount Paid = $25,000 + (0.5208% x 25000 x 6) = $32,741.19

For more such interest related questions

https://brainly.com/question/25793394

#SPJ11

Answer:

As we do not have a visual representation of the spinner, we cannot give an accurate answer to this question. However, we can provide a general approach to solving such problems.

To find the probability of an event, we divide the number of favorable outcomes by the total number of possible outcomes.

In this case, we need to find the number of favorable outcomes for the spinner landing on a multiple of 3 or in the dark green region. We then divide this by the total number of possible outcomes.

Assuming the spinner is divided into equal regions, we can determine the number of favorable outcomes by counting the number of regions that satisfy the given conditions. Let's say there are m regions that are multiples of 3, and n regions that are in the dark green region. We also assume that these regions do not overlap.

The total number of possible outcomes is simply the total number of regions on the spinner, which we can denote as t. Therefore, the probability of the spinner landing on a multiple of 3 or in the dark green region is given by:

(m + n) / t

To simplify this fraction, we can try to reduce the numerator and denominator to their lowest terms by dividing both by their greatest common factor.

Without knowing the number of regions, however, we cannot give a specific answer to this problem.

Answer:

We can use the principle of conservation of momentum to solve this problem. According to this principle, the total momentum of a system of objects remains constant if there are no external forces acting on the system.

Initially, only the cue ball is moving, and the 8 ball is at rest. Therefore, the initial momentum of the system is:

p_initial = m1 * v1 + m2 * v2

= 0.2 kg * 10 m/s + 0.15 kg * 0 m/s

= 2 kg m/s

After the collision, the cue ball is rolling forward at 1 m/s, and the 8 ball is moving in some direction with some velocity v_final. Therefore, the final momentum of the system is:

p_final = m1 * v1 + m2 * v_final

According to the conservation of momentum principle, p_initial = p_final. Therefore,

2 kg m/s = 0.2 kg * 1 m/s + 0.15 kg * v_final

Solving for v_final, we get:

v_final = (2 kg m/s - 0.02 kg m/s) / 0.15 kg

= 13.33 m/s

Therefore, the velocity of the 8 ball after the collision is 13.33 m/s.

The probability that the first customer will sit in a seat in the back row is 4/9.

A customer is a person or business that buys goods or services from another business.

There are a total of 45 seats in the theater. Out of those, 20 seats are in the back row.

So the probability that the first customer who enters the theater will sit in a seat in the back row is:

P(back row) = 20/45

Simplifying the fraction gives:

P(back row) = 4/9

Therefore, the probability that the first customer will sit in a seat in the back row is 4/9.

Learn more about fraction here : brainly.com/question/28699958

#SPJ1

On answering the provided question, we have got that As a result, the scale factor of the dilatation between triangle  ABC and A′′B′′C′′ is 1/2.

An additional four or so parts make a triangle a polygon. Its shape is a simple rectangle. An edged rectangle with the letters ABC on it is known as a triangle. Euclidean geometry yields a single plane and cube when the sides are actually not collinear. Having three parts and three angles makes a triangle a polygon. The corners of a triangle are where the three edges meet. The sum of the angles of a triangle's sides is 180.

By multiplying the individual scale factors of the two dilations, we can determine the scale factor of the dilation between ABC and A′′B′′C.

Each side of ABC is scaled down by a factor of 1/3 in the first dilation with a scale factor of 3. Thus, the corresponding sides of A, B, and C are a third the length of corresponding s of ABC.

In the second dilation, each side of "A" through "C" is scaled up by a factor of 3/2. As a result, the corresponding sides of A′′B′′C′′ are 3/2 times longer than those of A′B′C′.

1/3 × 3/2 = 1/2

As a result, the scale factor of the dilatation between ABC and A′′B′′C′′ is 1/2.

To know more about triangle visit:

https://brainly.com/question/2773823

#SPJ1

The product of two binomials is the result of multiplying each term from the first binomial by each term from the second binomial. The product of the two binomials, (-5x-1) and (2x+8), is[tex]0x^2+(-10x-2x)+(-8x-8)[/tex] which simplifies to -18x-10.

To calculate the product of the two binomials, we multiply the coefficients of each term together and add the exponents of the same base together. The coefficients of the first binomial, -5x and -1, are multiplied together to give a coefficient of -5. The exponents of x, 1 and 0, are added together, giving an exponent of 1. Thus, the first term is[tex]-5x^1[/tex]. The coefficients of the second binomial, 2x and 8, are multiplied together to give a coefficient of 16. The exponents of x, 1 and 0, are added together, giving an exponent of 1. Thus, the second term is[tex]16x^1[/tex].The last terms, -1 and 8, are multiplied together to give a coefficient of -8. The exponents of x, 0 and 0, are added together, giving an exponent of 0. Thus, the third term is[tex]-8x^0[/tex], which simplifies to -8.When all the terms are combined, the product of the two binomials, (-5x-1) and (2x+8), is -18x-10.

Learn more about binomials here:

https://brainly.com/question/28983916

#SPJ1