Given :
The pink car has a velocity of 4.4 m/s to the right while the blue car has a velocity of 6.8 m/s to the left.
To Find :
If the two cars crashed and stuck together, what would their combined momentum be afterwards and what direction would they be moving.
Solution :
Let, combined velocity of the car is v.
Also, let us assume that mass of both the cars are equal and it is m.
By conservation of momentum :
Initial momentum = Final momentum
m( 6.8 ) - m( 4.4 ) = 2mv
2mv =2.4m
v = 1.2 m/s
Therefore, the velocity of combined car after crash is 1.2 m/s .
Colette launches an air rocket in the upward, positive direction. It launches
with an initial velocity of 25.5 m/s. It accelerates in the downward, negative
direction at a rate of 9.81 m/s2. After 3.5 seconds, what is the magnitude of
the rocket's displacement?
A) 29 meters
B) 31 meters
C) –150 meters
D) 150 meters
Answer:
b
Explanation:
Answer:
The answer is A) 29 meters
Explanation:
I got this question right on the test! :)
A sky diver with a mass of 80 kg jumps from a plan. They are accelerating at a constant rate due to gravity which is 9.8 m/s2. What is the net Force of the sky diver? Show your work.
Answer:
At terminal velocity, the drag force = mass x g
Explanation:
Force = 80 kg x 9.8 m/s2 = 784 kgm/s2 = 784 N
Calculate the gravitational potential energy of a 2 kg banana hanging 5
meters above the ground.
(Use 10 m/s2 for gravity)
Answer:
100 J
Explanation:
The potential energy is given by the formula ...
PE = mgh
= (2 kg)(10 m/s^2)(5 m) = 100 J
What is a unit vector?
A) a vector with all three directions or
dimensions (x,y and z or i, j, k) that are given
B) a vector with only one dimension
C) a vector that has an x and y components that
D) are equal in magnitude
a vector with a magnitude of one
Answer:
A unit vector is (D) a vector with a magnitude of one
Explanation:
Unit Vector Information:
A unit vector is a vector with a magnitude of one. Vectors of different magnitudes can be scaled off the unit vector. Also, they can be used in two, three, or more dimensions.
Other Answers:
A. a vector with all three directions or dimensions that are given
This is the definition of a 3D vector. This is a line segment in three-dimensional space running from point A (tail) to point B (head). Each vector has a magnitude (or length) and direction.
B. a vector with only one dimension
This is the definition of an one-dimensional vector. This type of vector has no dimension, but a number of components, therefore it behaves like a real number.
C. a vector that has an x and y components that are equal in magnitude
(Unsure, I believe this would be defined as an equal vector. Correct me if I'm wrong and I will edit it.)
I hope this helps!
2. What was the average velocity of the ball as it fell?
Answer:
5 m/s
Explination:In fact, the ball's average velocity during its second of fall is 5 m/s (= (0 m/s + 10 m/s)/2). For half of the second the ball has been going less than 5 m/s, and for half of the second the ball's speed has been more than 5 m/s.
Answer:
5m/s i searched up on google :)
Explanation:
dont get mad :)
1. George Eliot pulls on a curtain string. If the curtain has a mass of 1.2 kg and she can pull
it so that it accelerates at a rate of 4 m/s2, what is the force she exerts on the curtain
string?
Answer:
F = 4.8 N
Explanation:
Given that,
Mass of the curtain, m = 1.2 kg
Acceleration of the pull, a = 4 m/s²
We need to find the force she exerts on the curtain.
We know that,
F = ma
Put al the values,
F = 1.2 kg × 4 m/s²
= 4.8 N
So, the force is 4.8 N.
deducing the acceleration = deduce the gradient of velocity-time graphs
true or false?
Answer:
True
Explanation:
Understanding the relationship between change in velocity with time will explain to you how the object is accelerating or decelerating. This means acceleration is a ratio calculated from the change in velocity of an object and change in time. In a velocity time graph, the y-axis represents the velocity and the x-axis represents the time.
The slope of the graph m = Δ y-axis values/Δ x-axis values
m= Δvelocity / Δ time
m= Δ v / Δ t ------this the definition of acceleration so;
a= Δ v / Δ t
Conclusion : The slope/gradient of a velocity -time graph is acceleration.
Describe the evidence of chemical changes that occurred during the etching process in:
a. your circuit board.
b. the copper chloride etching solution.
Not a straight up answer, but moreover to help you get it: (Circuit Boards)
Aside from the tasks it performs, perhaps the most important function of a circuit board is providing a way to integrate the electronics for a device in a compact space. A PCB allows components to be correctly connected to a power source while being safely insulated. Also, circuit boards are less expensive than other options because they can be designed with digital design tools and manufactured in high volume using factory automation.
Partially straight up, helping you get the answer: (Copper Chloride)
Copper(II) chloride is the chemical compound with the chemical formula CuCl 2. This is a light brown solid, which slowly absorbs moisture to form a blue-green dihydrate.
a cannon launches a 3.0 kg pumpkin with 110J of kinetic energy. what is the pumpkin’s speed?
Answer:
v = 8.56 [m/s]
Explanation:
The kinetic energy can be calculated by means of the following equation.
[tex]E_{k}=\frac{1}{2}*m*v^{2}[/tex]
where:
m = mass = 3 [kg]
v = velocity [m/s]
Ek = kinetic energy [J]
[tex]110 = \frac{1}{2} *3*(v^{2} )\\v^{2} = 220/3\\v=\sqrt{73.333}\\v=8.56[m/s][/tex]
I need a little help with this
Answer:
truck 1 has the most velocity
Explanation:
Because it weights less which means it faster and yea
In addition to a reference point you also need distance and __________ to describe location
displacement
btw in not sure
6th grade science I mark as brainliest.
Answer:
divide 10 by 50.
Explanation:
Because its time over speed 10/50
5 meter/ second
I think it's helpful
follow me and don't forget to Mark me as brainlist please
Nore ordered an ice cream cone.
Answer:
okay
Explanation:
okay
Answer:
Cool
Explanation:
A driver of a car traveling at 15.0 m/s applies the brakes, causing a uniform acceleration of -2.0 m/s squared. How long does it take the car to accelerate to a final speed of 10.0 m/s? How far has the car moved during the braking period?
Answer:
a) 2.5secs
b) 31.25m
Explanation:
a) From the question, we are given;
Initial speed u = 15m/s
Final speed v = 10.0m/s
Acceleration =-2.0m/s²
Required
How long it takes take the car to accelerate (Time t)
Using the equation of motion
v = u+ at
10 = 15+(-2)t
10 = 15-2t
10-15 = -2t
-5 = -2t
t = 5/2
t = 2.5secs
Hence it takes the car 2.5secs to accelerates.
b) We are to find distance S
Using the equation
S = ut + 1/2at²
S = 15(2.5)+1/2(-2)(2.5)²
S = 37.5-6.25
S = 31.25m
Hence the car as moved by 31.25m during the breaking period.
Hiii I think the answer might be 3.3 seconds,not exaclty sure tho
Engine 1 produces twice the power of engine 2.
If it takes engine 1 the time T to do the work W, how long does it take engine 2 to do the same work?
Express your answer in terms of some of all of the variables T and W.
T2=________________
Answer:
[tex]T_2=\frac{T}{2}[/tex]
Explanation:
Given that engine 1 produces twice the power of engine 2.
Let [tex]P_1[/tex] and [tex]P_2[/tex] be the power of engine 1 and engine2.
So, the power of the engine 2,
[tex]P_2 = 2P_1\cdots(i)[/tex]
As, Work = Power x time,
So, the work, W, done by an engine 1:
[tex]W=P_1\timesT\cdots(ii)[/tex]
The work, W, done by an engine 2:
[tex]W_2=P_2\times T_2\cdots(iii)[/tex]
If the work done by both the engines are the same, then
[tex]W_2=W[/tex]
[tex]\Rightarrow P_2\times T_2=P_1\timesT[/tex] [from (ii) nd (iii)]
[tex]\Rightarrow 2P_1\times T_2=P_1\timesT[/tex] [by using (i)]
[tex]\Rightarrow 2 T_2=T \\\\\Rightarrow T_2=\frac{T}{2}[/tex]
Hence, [tex]T_2=\frac{T}{2}.[/tex]
The time taken for engine 2 to do the same amount of work is given by:
T₂ = 2TLet the power of the 1st engine be P₁
Let the power of the 2nd engine be P₂
Power = Work / timeFrom the question given above,
Engine 1 produces twice the power of engine 2.
Thus,
P₁ = 2P₂
P₂ = ½P₁
Next, we shall determine the power used by engine 1 to do the work in time T.Work = W
Time (T₁) = T
Power (P₁) =?Power = Work / time
[tex]P_{1} = \frac{W}{T}\\\\[/tex]Finally, we shall determine the time taken for engine 2 to do the same work.Work = W
Power of engine 1 (P₁) = [tex]\frac{W}{T}\\\\[/tex]
Power of engine 2 (P₂) = ½P₁
Power of engine 2 (P₂) = [tex]\frac{1}{2} (\frac{W}{T}) = \frac{W}{2T}[/tex]
Time (T₂) =?[tex]Power = \frac{Work}{time} \\\\ P_{2} = \frac{W}{T_{2}} \\\\\frac{W}{2T} = \frac{W}{T_{2}} \\\\\frac{1}{2T} = \frac{1}{T_{2}}\\\\[/tex]
Invert
T₂ = 2TTherefore, the time taken for engine 2 to do the same amount of work is: T₂ = 2T
Learn more: https://brainly.com/question/21822614
4. What does doubling the voltage do to the strength of the electromagnet?
Answer:
it can make it stronger!
Answer:
The strength of the magnet in this case is directly proportional to the total voltage sum of all of the batteries
A car’s momentum is p when it is traveling with a velocity of v. If the velocity of that car doubles, what is the new momentum of the car?
Answer:
∆p=(m2v)kg.m/s
Explanation:
∆p=mv where v=2v. hence ∆p=m2v
Answer:
c. 2p
Explanation:
edge 2021
Which of the following for an object should be known to calculate its density? (5 points)
A.the heat present in it
B.The amount of matter in it
C.The force of gravity acting on it
D.The space between the object and another object
fill in the blanks
a. Work is assosiated with ___________ and _________ .
Answer: Job and career
Explanation:
Work is associated with job and career. If somebody is having a great career and if somebody wants a great career he will look for a job that is fitting his career and in that way, he will work for it to have an even better career which will bring him a better job.
A 52 kg person is running 2.5 m/s. What is their momentum?
Answer:
130kg/ms
Explanation:
given data mass,52kgvelocity,2.5m/smomentum?from momentumM=mvMass=52kg
Velocity=2.5m/s
Momentum=?
We know that,
Momentum=Mass × velocity
Or,momentum=52kg× 2.5m/s
Or,momentum=130 kgm/s
So,the momentum is 130 kgm/s.
How much Tension force is required to pull a 1500 kg car (it is being towed) forward with an acceleration of 3 m/s^2 if the friction force on the towed car's tires is pulling backward with a force of 2500 N?
If the pull is done horizontally, then the net force on the car is
∑ F = T - f = (1500 kg) (3 m/s²)
where T is the magnitude of the tension in the towing cable, and f is the friction which points in the opposite direction. Then
T = f + (1500 kg) (3 m/s²)
T = 2500 N + 4500 N
T = 7000 N
30 POINTS!!!! If you increase the frequency, what happens to the velocity of the wave?
In answering this question, describe how you determined the velocity as well as the result you arrived at. Then, provide a scientific explanation for this result, based on your knowledge of waves.
Answer:
As frequency increases, wavelength decreases. Frequency and wavelength are inversely proportional. This basically means that when the wavelength is increased, the frequency decreases and vice versa.
Explanation:
A wave's velocity is independent of its intensity and equal to the product of its wavelength and frequency (number of vibrations per second) so, velocity remains constant if you increase the frequency.
What is Frequency?Frequency is defined as the no of waves that are passing from the point in respect to a given time. Frequency can be measured in Hertz. Humans, whose capacity to hear is normal, can hear between the frequency of 20 Hertz to 20000 Hertz.
In mathematical form, the frequency is the factor of one divided by the time period. The number of cycles or vibrations a body in periodic motion makes in one unit of time.
Wavelength reduces as frequency rises. The relationship between frequency and wavelength is inverse. In essence, this means that the frequency reduces as the wavelength increases and vice versa.
Frequency ∝ 1 / Wavelength
Velocity = Frequency × Wavelength
Thus, it remains constant.
To know more about frequency:
https://brainly.com/question/14316711
#SPJ2
Margie used arrows to represent the gases that enter and leave a plant during the process of photosynthesis, as shown below. PLEASE HELPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPpppppp
Answer:
D. Arrow 1 is carbon dioxide and arrow 2 is oxygen.
Explanation:
What amount of force is required for a 200 kg grizzly bear to accelerate at 2.5 m/s/
s?
The asthenosphere is a part of the upper mantle just below the lithosphere that is involved in plate tectonic movement and isostatic adjustments. Which is NOT true about the role of the asthenosphere in plate tectonics?
Complete option to the question:
A. The asthenosphere is broken up into large continental- and ocean-sized plates.
B. Convection currents within the asthenosphere push magma upward to create new crust.
C. Heat from deep within Earth is thought to keep the asthenosphere malleable.
D. The asthenosphere is the repository for parts of the lithosphere that are dragged downward in subduction zones.
Answer: The correct option is A (The asthenosphere is broken up into large continental- and ocean-sized plates.)
Explanation:
Among the components that makes up the earth crust are the lithosphere and the asthenosphere.
The LITHOSPHERE is the outer layer of the earth structure which consists of the upper part of the mantle and the crust.
The ASTHENOSPHERE is a part of the upper mantle just below the lithosphere that is involved in plate tectonic movement and isostatic adjustments. It is denser and weaker layer of the upper mantle which permits the movement of tectonic plates in the lithosphere.
The asthenosphere is the repository for parts of the lithosphere that are dragged downward in subduction zones.Heat from deep within Earth is thought to keep the asthenosphere malleable. And the convection currents within the asthenosphere push magma upward to create new crust. But it is not broken up into large continental- and ocean-sized plates.
Ill give u 50 points and Brainiest if u answer this right
A pinball bangs against a bumper of a pinball machine with a speed of 0.44 m/s. If the ball has a mass of 0.022 kg, what is the ball's kinetic energy?
Answer:
0.0021 J
Explanation:
[tex]KE=\frac{1}{2} mv^{2}\\KE=\frac{1}{2}*0.022*0.44^{2} \\KE=0.0021\ J[/tex]
Answer: KE= 0.0021296 ( Hopefully this will help you, sorry if I'm wrong)
Explanation:
A person with a mass of 75 kg is accelerated to 3m/s2 how much force applied to him
Answer:
225 NExplanation:
The force acting on an object given it's mass and acceleration can be found by using the formula
force = mass × acceleration
From the question we have
force = 75 × 3
We have the final answer as
225 NHope this helps you
Help me in this please help me!
Answer:
1. A
2. C
3. A
4. B
Explanation:
A conductor allows electric current to pass through it. Hence, when conductors are connected in a closed circuit, current flows.
All the resistors in Q2 are connected in series. In a series connection, the current across all the resistors is the same.
In a battery, chemical energy is converted to electrical energy by chemical reactions.
When a new resistor is connected in parallel to a circuit the current increases accordingly.
b. If we drop a ball from the roof, its falls
downward
Answer:
yes ,what's the question
and if the question is why
then it's for gravity
Answer:
the ball falls downward due to gravity
All of these are likely to speed up the rate of a reaction except decreasing the surface area. increasing the temperature. increasing the pressure. adding a catalyst.
Answer:
decreasing the surface area.
Explanation:
The rate of reaction or the reaction rate may be defined as the speed or the rate at which the reaction occurs. It is the speed of formation of the products from the reactants. The following factors increases the rate of reaction :
1. by adding a catalyst
2. by increasing the temperature
3. by increasing the pressure
4. by increasing the surface area
5. by increasing concentration
Hence, decreasing the surface area of the reaction reduces the rate of reaction.