The small repeating units used to synthesize polymers are called _______.

To solve for the specific heat of the metal, we can use the formula:

q = mcΔT

where q is the heat gained or lost, m is the mass of the substance, c is the specific heat capacity of the substance, and ΔT is the change in temperature.

First, let's calculate the heat gained by the water:

q_water = mcΔT
= (38.6 g)(4.18 J/g°C)(32.5 - 25.2)°C
= 1,230.8 J

Next, let's calculate the heat lost by the metal:

q_metal = -q_water
= -1,230.8 J

Note that we use a negative sign for q_metal because the metal is losing heat to the water.

Now we can solve for the specific heat of the metal:

q_metal = mcΔT
-1,230.8 J = (45.2 g)c(32.5 - 100.0)°C
c = 0.473 J/g°C

Therefore, the specific heat of the metal is 0.473 J/g°C.

Learn more about metal here:

https://brainly.com/question/29404080

#SPJ11

The solubility at 25 °C of Zn(OH)₂ in pure water is 6.0 x 10⁻¹³ M, and in a 0.0050 M ZnSO₄ solution, it is 6.0 x 10⁻¹² M.

The solubility of Zn(OH)₂ can be determined using the solubility product constant (Ksp) value, which is provided as 3.0 x 10⁻¹⁷ in the question.

The chemical equation for the dissolution of Zn(OH)₂ in water is:

Zn(OH)₂(s) ⇌ Zn²⁺(aq) + 2OH⁻(aq)

The Ksp expression for the dissolution of Zn(OH)₂ is:

Ksp = [Zn²⁺][OH⁻]²

Since the solubility of Zn(OH)₂ is x mol/L, the concentrations of Zn²⁺ and OH⁻ ions in the saturated solution are also x mol/L and 2x mol/L, respectively.

Substituting these concentrations into the Ksp expression, we get:

Ksp = (x)(2x)² = 4x³

Rearranging this expression, we can solve for the solubility of Zn(OH)₂ in terms of Ksp:

[tex]x = (Ksp/4)^{(1/3)[/tex]

Substituting the given value of Ksp into this equation, we get:

x =[tex](3.0 \times 10^{-17}/4)^{(1/3)[/tex] = 6.0 x 10⁻¹³ M

This is the solubility of Zn(OH)₂ in pure water.

To calculate the solubility of Zn(OH)₂ in a 0.0050 M ZnSO₄ solution, we need to take into account the common ion effect, which will decrease the solubility of Zn(OH)₂ in the presence of Zn²⁺ ions from the added ZnSO₄.

The chemical equation for the dissociation of ZnSO₄ in water is:

ZnSO₄(s) ⇌ Zn²⁺(aq) + SO₄²⁻(aq)

The addition of ZnSO₄ to water will increase the concentration of Zn²⁺ ions in the solution, which will decrease the solubility of Zn(OH)₂ according to Le Chatelier's principle.

The common ion effect can be taken into account using the ion product (Q) of the dissolution reaction, which is given by:

Q = [Zn²⁺][OH⁻]²

In the presence of the added Zn²⁺ ions, the concentration of OH⁻ ions required to reach equilibrium is lower than it is in pure water. Therefore, the solubility of Zn(OH)₂ will be lower in the presence of the added Zn²⁺ ions.

To calculate the solubility of Zn(OH)₂ in the presence of the added ZnSO₄, we can use the following equation:

Ksp = Q + [Zn²⁺]x[OH⁻]²

At equilibrium, Q = Ksp, so we can rearrange this equation to solve for the solubility, x:

[tex]x = [(Ksp - [Zn^{2+}]\times)/(2)]^{(1/2)[/tex]

To know more about solubility, refer here:
https://brainly.com/question/14366471#
#SPJ11

Based on the masses that react, we have 0.5 mol of NaOH and 0.185 mol of FeCl₃, which react to form 0.185 mol of Fe(OH)₃.

To calculate the amount (mol) of each compound based on the masses that react, you first need to use the given molar masses to convert the mass of each compound to moles. This can be done using the formula:

moles = mass (in grams) / molar mass (in grams/mol)

For example, if we have 20 grams of NaOH, we can calculate the number of moles as:

moles NaOH = 20 g / 40.00 g/mol = 0.5 mol

Similarly, if we have 30 grams of FeCl₃, we can calculate the number of moles as:

moles FeCl₃ = 30 g / 162.21 g/mol = 0.185 mol

Therefore, we have 0.5 mol of NaOH and 0.185 mol of FeCl₃ reacting with each other. The balanced chemical equation for the reaction is:

3 NaOH + FeCl₃ → Fe(OH)₃ + 3 NaCl

From the equation, we can see that 3 moles of NaOH react with 1 mole of FeCl₃ to produce 1 mole of Fe(OH)₃ and 3 moles of NaCl. Since we have excess NaOH in this case, we can use the amount of FeCl₃ to determine the limiting reactant and the amount of product formed.

Since we have 0.185 mol of FeCl₃ and it reacts with 3 moles of NaOH, the amount of NaOH required for complete reaction would be:

moles NaOH required = 0.185 mol FeCl₃ × (3 mol NaOH / 1 mol FeCl₃) = 0.555 mol

Since we have 0.5 mol of NaOH, it is the limiting reactant and only 0.185 mol of FeCl₃ will react to form the product. The amount of Fe(OH)₃ formed can be calculated as:

moles Fe(OH)₃ formed = 0.185 mol FeCl₃ × (1 mol Fe(OH)₃ / 1 mol FeCl₃) = 0.185 mol

Therefore, we have 0.5 mol of NaOH and 0.185 mol of FeCl₃, which react to form 0.185 mol of Fe(OH)₃.

To know more about mass, refer to the link below:

https://brainly.com/question/1416379#

#SPJ11

To arrange species into isoelectronic groups, compare the number of electrons in each species. Species with the same number of electrons belong to the same isoelectronic group. Separate species with different electron counts into different groups.

We can arrange the species into isoelectronic groups, follow these steps:

1. Identify the species you need to group. Unfortunately, you didn't provide a list of species, so I'll use some examples: Na⁺, Cl⁻, and Ne.

2. Determine the number of electrons in each species. Na⁺ has 10 electrons, Cl⁻ has 18 electrons, and Ne has 10 electrons.

3. Group the species with the same number of electrons together. In this case, Na⁺ and Ne have the same number of electrons, so they belong to the same isoelectronic group (Group A), while Cl⁻ belongs to another group (Group B) due to its different electron count.

4. Continue this process for all other species you have, placing them into the appropriate isoelectronic group (e.g., Group C) based on their electron counts.

Remember, isoelectronic species have the same number of electrons, so you'll want to group them accordingly.

To know more about the isoelectronic groups refer here :

https://brainly.com/question/16899641#

#SPJ11

The volume, in milliliters, of the krypton gas is 523ml.

The Ideal gas law is the equation of state of a hypothetical ideal gas. It is a good approximation to the behaviour of many gases under many conditions, although it has several limitations. The ideal gas equation can be written as

                                    PV = nRT

where,

P = Pressure

V = Volume

T = Temperature

n = number of moles

Given,

Mass = 10g

Pressure = 563 mm Hg

Temperature = 298 K

moles of Kr =mass / atomic mass

= 10 / 84

= 0.119 moles

PV = nRT

563 × V = 0.119 × 8.314 × 298

V = 0.523L = 523ml

Learn more about Ideal Gas law, here:

https://brainly.com/question/28257995

#SPJ1

The volume of the balloon after heating is 5.47 liters.

To determine the volume of the balloon after heating, we can use Charles's Law, which states that the volume of the gas is directly proportional to its temperature when the pressure and the amount of gas are held constant.

Mathematically, Charles's Law can be expressed as;

V₁ / T₁ = V₂ / T₂

where; V₁ = Initial volume of the gas (before heating)

T₁ = Initial temperature of the gas (before heating)

V₂ = Final volume of the gas (after heating)

T₂ = Final temperature of the gas (after heating)

Given; V₁ = 4.3 liters

T₁ = 26.4°C (which needs to be converted to Kelvin by adding 273.15)

T₂ = 109.4°C (which needs to be converted to Kelvin by adding 273.15)

Converting temperatures to Kelvin;

T₁ = 26.4 + 273.15 = 299.55 K

T₂ = 109.4 + 273.15 = 382.55 K

Plugging the values into Charles's Law equation;

V₁ / T₁ = V₂ / T₂

4.3 / 299.55 = V₂ / 382.55

Solving for V₂ (final volume of the balloon after heating):

V₂ = (4.3 / 299.55) × 382.55

V₂ ≈ 5.47 liters

To know more about Charles's Law here

https://brainly.com/question/16927784

#SPJ1

Answer:

I believe its KNO3 hope this helps (:

Explanation:

A special concern in deep anode beds is the potential for blockage of gas due to tight soils, such as clay and silt, at the anodes.

As the electrical current flows through the anodes, it produces gas that must be able to escape to prevent blockages that can affect the performance of the anode bed. Tight soils can impede gas flow, leading to accumulation and eventual blockage. This is a significant concern as it can lead to reduced anode efficiency and corrosion control, and potentially costly maintenance or replacement of the anode bed. Therefore, careful attention must be paid to soil conditions and proper installation techniques to ensure that gas flow is not hindered in deep anode beds. Additionally, monitoring of gas accumulation and pressure levels is necessary to identify and address any potential issues in a timely manner.

learn more about anode Refer: https://brainly.com/question/13958755

#SPJ11

Adding NaF and Na2SO4 will decrease the solubility of BaF2 while adding HCl will increase its solubility

For more such question on solubility

https://brainly.com/question/28202068

#SPJ11

In the given chemical reaction, the reactants are SnO_{2} (tin(IV) oxide) and H_{2} (hydrogen gas). A reactant is a substance that participates in a chemical reaction and is transformed into one or more products as a result of the reaction.

In this specific reaction, SnO_{2} and H_{2} are the starting materials that react with each other to form the products, Sn (tin) and H_{2}O (water). The reaction can be summarized as follows:
SnO_{2} + 2H_{2} → Sn + 2H_{2}O
Here, tin(IV) oxide (SnO_{2}) and hydrogen gas (H_{2}) are the reactants, and tin (Sn) and water (H_{2}O) are the products formed. The number "2" in front of H_{2}and H_{2}O indicates that two molecules of hydrogen gas and two molecules of water are involved in the reaction. This balanced equation ensures that the law of conservation of mass is obeyed, meaning the total mass of the reactants is equal to the total mass of the products.

learn more about  reactants Refer: https://brainly.com/question/30417339

#SPJ11

HF is corrosive at concentration that are ≥ 1 M (1 mol/L). Therefore the correct option is option C.

HF (hydrofluoric acid) is a very poisonous and corrosive acid that, when contacted, can result in serious burns and tissue damage. The concentration of HF affects its ability to corrode.

At concentrations of less than 1 M (1 mol/L), HF is corrosive. At this concentration, HF can quickly permeate the skin, resulting in painful tissue injury.

Because of its fast skin penetration and capacity to interact with calcium ions in the body to generate insoluble calcium fluoride (CaF2), HF has a corrosive effect on tissues and cells.

Although the effects may be delayed or less severe than at higher concentrations, severe burns and tissue damage can still occur at HF concentrations of less than 0.1 M (0.1 mol/L). Therefore the correct option is option C.

For such more question on concentration:

https://brainly.com/question/24795637

#SPJ11

The balanced equation for the reaction between aqueous zinc bromide (ZnBr₂) and solid aluminum (Al) to produce aqueous aluminum bromide (AlBr₃) and solid zinc (Zn) is:

3ZnBr₂ + 2Al -> 2AlBr₃ + 3Zn

In this reaction, three moles of zinc bromide (ZnBr₂ ) react with two moles of aluminum (Al) to yield two moles of aluminum bromide (AlBr₃) and three moles of zinc (Zn). The equation is balanced in terms of both mass and charge, ensuring that the number of atoms of each element is the same on both sides of the equation.

This reaction represents a single replacement or displacement reaction, where aluminum replaces zinc in the compound to form a new compound and release zinc as a solid product.

Learn more about balanced equation,

https://brainly.com/question/7144750

#SPJ4

To determine the absorbance of a copper(II) sulfate solution at 700 nm, you would need to conduct a spectrophotometric experiment.

Here's a step-by-step explanation:
1. Prepare a copper(II) sulfate solution with a known concentration. Copper(II) sulfate is a blue compound that forms a colored solution when dissolved in water.
2. Turn on the spectrophotometer and set the wavelength to 700 nm. A spectrophotometer is an instrument that measures the amount of light absorbed by a solution at a specific wavelength.
3. Calibrate the spectrophotometer using a blank (typically distilled water) to set the absorbance to zero.
4. Fill a cuvette with the copper(II) sulfate solution, and place it in the spectrophotometer.
5. Record the absorbance reading displayed by the spectrophotometer.
Unfortunately, without the actual data from the experiment, it's not possible for me to select the closest answer among the options you provided (0.517, 0.034, 1.320, 0.351). The absorbance value would depend on the specific concentration of the copper(II) sulfate solution used and the spectrophotometer's calibration.
However, you can follow the steps above to conduct the experiment and obtain the absorbance value yourself. Good luck!

For more information on copper(II) sulfate see:

https://brainly.com/question/31654282

#SPJ11

The percent by mass of acetic acid in vinegar is 5%.

The percent by mass of acetic acid in vinegar can be calculated using the formula:

% by mass = (mass of solute ÷ mass of solution) × 100%

The mass of solute is mass of acetic acid, and mass of solution is the mass of vinegar.

For example, if we have 100 mL of vinegar, its mass would be 100 g.

Let's assume concentration of 5% acetic acid by mass.

This means that in 100 g of vinegar, 5 g is acetic acid. Therefore,  percent by mass of acetic acid in vinegar can be calculated as:

% by mass = (5 g ÷ 100 g) × 100% = 5%

To know more about acetic acid, here

brainly.com/question/15202177

#SPJ1

BaSO₄ and CoCO₃ are insoluble, while Na₃PO₄ is soluble, and AgI is insoluble.

To determine whether each of the following compounds is soluble or insoluble, consider the general solubility rules. Here are the results for each compound:

1. BaSO₄ (Barium sulfate) - This compound is insoluble because most sulfate salts are soluble, but barium sulfate is an exception.

2. CoCO₃ (Cobalt(II) carbonate) - This compound is insoluble because most carbonate salts are insoluble, and cobalt(II) carbonate follows this rule.

3. Na₃PO₄ (Sodium phosphate) - This compound is soluble because most sodium salts are soluble, and sodium phosphate is no exception.

4. AgI (Silver iodide) - This compound is insoluble because most iodide salts are soluble, but silver iodide is an exception.

In summary, by determining we can conclude that the BaSO₄ and CoCO₃ are insoluble, while Na₃PO₄ is soluble, and AgI is insoluble.

To know more about the solubility refer here :

https://brainly.com/question/28170449#

#SPJ11

The one or two-letter symbol for the element is Ti (Titanium).

There is one unpaired electron in the ground state of this atom, which is located in the 3d subshell.

Explanation:

The electron configuration [Ar]3d1 4s2 indicates that the atom has a total of 22 electrons. The [Ar] part of the configuration represents the complete electron configuration of Argon (a noble gas) which has 18 electrons. The remaining 4 electrons are distributed among the 3d and 4s orbitals.

In the ground state, the 4s orbital is filled before the 3d orbital. This means that the 4s orbital contains two electrons, and the 3d orbital contains one electron. Since there is only one electron in the 3d orbital, it is unpaired.

Unpaired electrons are important because they are involved in chemical reactions and bonding. In this case, the unpaired electron in the 3d orbital of Titanium can participate in chemical reactions, forming bonds with other atoms or molecules.

Learn more about molecules here:

https://brainly.com/question/19922822

#SPJ11

The pH of a 3.90% KOH by mass solution with a density of 1.01 g/ml is 1.15.

The pH of a solution can be determined by calculating the molarity of the solute, in this case potassium hydroxide (KOH), and then using the appropriate equation to calculate the pH.

For a solution of 3.90% KOH by mass, the molarity can be found by multiplying the mass percent by the density of the solution (1.01 g/ml) and then dividing by the molar mass of KOH (56.1 g/mol).

This yields a molarity of 0.07 moles/L. The pH of a solution with this molarity can be calculated using the equation pH = -log([KOH]), where [KOH] is the molarity of KOH. Plugging in 0.07 moles/L for [KOH] yields a pH of 1.15. Therefore, the pH of a 3.90% KOH by mass solution with a density of 1.01 g/ml is 1.15.

Know more about molarity here

https://brainly.com/question/8732513#

#SPJ11

The mass of sodium tetraoxosulphate (VI) formed when 0.5 mole of sodium hydroxide reacts with tetraoxosulphate ions is 71.0 g.

To calculate the mass of sodium tetraoxosulphate (VI) formed, we first need to write a balanced chemical equation for the reaction between sodium hydroxide (NaOH) and tetraoxosulphate (VI) ions ([tex]SO4^2[/tex]-):

[tex]NaOH + H_{2}SO_{4} \rightarrow Na_{2}SO_{4} + 2H_{2}O[/tex]

From the balanced equation, we can see that 1 mole of NaOH reacts with 1 mole of [tex]H_{2}SO_{4}[/tex] to produce 1 mole of [tex]Na_{2}SO_{4}[/tex]. Therefore, the number of moles of [tex]Na_{2}SO_{4}[/tex] produced can be calculated using the following formula:

moles of [tex]Na_{2}SO_{4}[/tex] = moles of NaOH

Since we are given 0.5 moles of NaOH, we know that 0.5 moles of [tex]Na_{2}SO_{4}[/tex] will be produced.

To calculate the mass of [tex]Na_{2}SO_{4}[/tex] produced, we need to know its molar mass.

[tex]Na_{2}SO_{4}[/tex] molar mass = 2(Na atomic mass) + 1(S atomic mass) + 4(O atomic mass)

[tex]Na_{2}SO_{4}[/tex] molar mass = 2(23.0 g/mol) + 32.1 g/mol + 4(16.0 g/mol)

[tex]Na_{2}SO_{4}[/tex] molar mass = 142.0 g/mol

Now, we can use the following formula to calculate the mass of [tex]Na_{2}SO_{4}[/tex] produced:

mass = moles * molar mass

mass = 0.5 mol * 142.0 g/mol

mass = 71.0 g

Learn more about molar mass

https://brainly.com/question/22997914

#SPJ4

There are few or no clouds near a high pressure system. The correct option is (C).

High Pressure System is a large-scale weather system with an area of high atmospheric pressure in its centre, surrounded by lower pressure air. Another name for High Pressure System is Anticyclone.

High-pressure systems are typically associated with clear and dry weather conditions, as the descending air suppresses the formation of clouds and precipitation.

In the Northern Hemisphere, winds around a high pressure system circulate in a clockwise direction, while in the Southern Hemisphere, the winds circulate counterclockwise. High-pressure systems are often associated with stable weather patterns and can persist for days or even weeks, depending on the strength and location of the system.

Learn more about atmospheric pressure here:

https://brainly.com/question/13450762

#SPJ1

The correct option is B, A steric strain occurs when parts of molecules are too close to each other, and their electron clouds overlap each other.

An electron is a negatively charged subatomic particle that orbits the positively charged nucleus of an atom. It has a mass of approximately 9.109 × [tex]10^{-31}[/tex] kilograms, making it nearly 1/1836 the mass of a proton. Electrons are essential to the structure and behavior of atoms and molecules, as they determine how they interact with each other and with external forces.

Electrons have discrete energy levels, and they can gain or lose energy by absorbing or emitting photons of specific wavelengths. This property is the basis of various chemical and physical phenomena, such as atomic spectroscopy and photochemistry. In addition to their role in atomic and molecular structure, electrons play a crucial role in electricity and electronics.

To learn more about Electron visit here:

brainly.com/question/24372542

#SPJ4

Because ethanol (structure b) can make more hydrogen bonds than diethyl ether (structure a), it will have a higher boiling point.

Polarity affects boiling point via its impact on intermolecular forces. The attracting or repelling interactions that take place between molecules are known as intermolecular forces, such as those that control a substance's boiling point.

Learn more about boiling point:brainly.com/question/31218627

#SPJ1

If you have a colorless solution in a test tube and you need to differentiate between the chemical species Cu and Pb, you can use a reagent to do so. Among the options provided, the reagent that will allow you to differentiate between the two species is K2CrO4.

If the solution is Cu, a yellow precipitate will form after adding K2CrO4. On the other hand, if the solution is Pb, the solution will turn yellow but no solid will form.If you choose to use HCl as the reagent, and the solution is Cu, a white precipitate will form after adding the HCl. However, if the solution is Pb, the solution will remain the same after adding the HCl.Alternatively, if you choose to use hot water as the reagent, and the solution is Cu, the solution will remain the same after adding the hot water. However, if the solution is Pb, a white precipitate will form after adding the hot water.
In summary, to differentiate between Cu and Pb in a colorless solution, you can use K2CrO4 as the reagent, which will result in a yellow precipitate for Cu and a yellow solution for Pb. Using HCl or hot water as the reagent will also allow you to differentiate between the two species, but the outcomes will be different depending on which species is present in the solution.

Learn more about chemical here

https://brainly.com/question/1222323

#SPJ11

A flat, triangular twinned diamond crystal is called a macled diamond. It is a type of diamond crystal that has two triangular faces that intersect in a V-shape.

The two faces are mirror images of each other, and they are joined at their vertices. This type of diamond is quite rare, as it occurs when two separate diamond crystals grow in the same crystal lattice and become interlocked. The resulting diamond has two distinct faces, as well as a unique set of physical properties. It often has an interesting pattern of inclusions, which can make it harder to cut and polish. Macled diamonds are prized for their beauty and rarity, and are highly sought after by collectors.

To learn more about diamond click here https://brainly.com/question/9286031

#SPJ11

Bonds that form due to the attraction between oppositely charged atoms that have gained or lost electrons are called ionic bonds.

Ions with opposite charges are formed when one or more electrons are moved from one atom to another. This process creates ionic connections. An anion is a negatively charged ion, and a cation is a positively charged ion.

The two ions are joined in an ionic bond by their electrostatic attraction to one another. The magnitude of the charges on the ions and the separation between them affect the bond's strength.

Ionic compounds frequently have high melting and boiling temperatures because ionic bonds are typically quite strong.

For such more question on ionic bond:

https://brainly.com/question/977324

#SPJ11

The pH of the mixture is 3.82. The pH of the solution is 9.71.

PART A:-

pH = pKa + log([A-]/[HA])

moles of HF = 0.26 mol/L × 0.150 L = 0.039 mol

moles of NaF = 0.32 mol/L × 0.230 L = 0.074 mol

The total volume of the mixture is:

Vtot = 150.0 mL + 230.0 mL = 380.0 mL = 0.380 L

The molarities of HF and NaF are therefore:

[HF] = 0.039 mol / 0.380 L = 0.103 M

[NaF] = 0.074 mol / 0.380 L = 0.195 M

Now we can calculate the ratio of [A-]/[HA]:

[A-]/[HA] = [F-]/[HF] = 0.195 M / 0.103 M = 1.893

Finally, we can use the pKa of HF to calculate the pH:

pKa = -log(Ka) = -log(6.8 × [tex]10^{-4}[/tex]) = 3.17

pH = 3.17 + log(1.893) = 3.82

PART B:-

pH = pKa + log([A-]/[HA])

The pKa of methylammonium ion is 10.75. The initial concentration of ethylamine is:

[ethylamine] = 0.11 M × 170.0 mL / 440.0 mL = 0.043 M

The initial concentration of ethyl ammonium ion is:

[ethylammonium ion] = 0.22 M × 270.0 mL / 440.0 mL = 0.136 M

The ratio of [A-]/[HA] is:

[A-]/[HA] = [ethylamine] / [ethylammonium ion] = 0.043 M / 0.136 M = 0.316

Therefore,

pH = 10.75 + log(0.316) = 9.71

pH is a measure of the acidity or basicity of a solution, defined as the negative logarithm of the concentration of hydrogen ions (H+) in the solution. The pH scale ranges from 0 to 14, with 0 being the most acidic, 7 being neutral, and 14 being the most basic or alkaline.

In water, which is neutral, the concentration of H+ ions and hydroxide ions (OH-) are equal, resulting in a pH of 7. When an acid is added to water, it donates H+ ions, increasing their concentration and lowering the pH below 7. Conversely, when a base is added, it accepts H+ ions, decreasing their concentration and raising the pH above 7. The pH of a solution is an important factor in many chemical reactions and biological processes.

To learn more about pH visit here:

brainly.com/question/491373

#SPJ4

Answer:

The products must be kept apart as the products could react spontaneously. Also, ions from the electrolyte pass through the mesh. This may include Na+ and Cl- ions if the electrolyte is maintained at a molten state.

The Chlorate (ClO3-), Sulfite (SO32-), Nitrite (NO2-), Ferric ion (Fe3+) To list these ions in order from the greatest number of electrons to the smallest, we need to first determine the number of electrons for each ion. Nitrite (NO2-) Nitrogen has 7 electrons, and each oxygen has 8 electrons. Since it carries a 1- charge, it gains 1 extra electron. So, NO2- has 7 + 8 + 8 + 1 = 24 electrons.

The Ferric iron Fe3+ Iron has 26 electrons, but with a 3+ charge, it loses 3 electrons. So, Fe3+ has 26 - 3 = 23 electrons. Sulfite SO32- Sulfur has 16 electrons, and each oxygen has 8 electrons. With a 2- charge, it gains 2 extra electrons. So, SO32- has 16 + 8 + 8 + 8 + 2 = 42 electrons. Chlorate ClO3- Chlorine has 17 electrons, and each oxygen has 8 electrons. With a 1- charge, it gains 1 extra electron. So, ClO3- has 17 + 8 + 8 + 8 + 1 = 42 electrons. Since chlorate and sulfite both have 42 electrons, we need a tiebreaker. The question states to list the molecule with the smaller overall charge first. Chlorate has a 1- charge, while sulfite has a 2- charge. Therefore, chlorate comes before sulfite. So, the final order is Chlorate ClO3-, Sulfite SO32-, Nitrite NO2-, Ferric ion Fe3+.

learn more about Ferric here.

https://brainly.com/question/9496279

#SPJ11

Based on the given emission spectrum, we can deduce that the hypothetical atom with a single electron has three energy levels. Diagrams that satisfy the condition that the atom has three energy levels corresponding to the wavelengths of the emitted photons are:

1) The first diagram has energy levels of -0.5 eV, -1.13 eV, and -1.77 eV, respectively.

2) The second diagram has energy levels of -0.5 eV, -0.87 eV, and -1.15 eV, respectively.

The energy difference between these levels corresponds to the wavelengths of the emitted photons, as per the relationship E = hc/λ, where E is energy, h is Planck's constant, c is the speed of light, and λ is wavelength.

Two possible energy-level diagrams that could represent the structure of this atom are as follows:

1) The first diagram has energy levels of -0.5 eV, -1.13 eV, and -1.77 eV, respectively. These energy levels correspond to the wavelengths of the emitted photons: 248 nm, 413 nm, and 620 nm. The transitions between these levels are indicated by arrows, and the energy of the emitted photons is shown in eV. This diagram implies that the atom has a ground state and two excited states.

2) The second diagram has energy levels of -0.5 eV, -0.87 eV, and -1.15 eV, respectively. These energy levels also correspond to the wavelengths of the emitted photons: 248 nm, 413 nm, and 620 nm. The transitions between these levels are indicated by arrows, and the energy of the emitted photons is shown in eV. This diagram implies that the atom has a ground state and two metastable states.

Both of these diagrams satisfy the condition that the atom has three energy levels corresponding to the wavelengths of the emitted photons, and are therefore consistent with the given emission spectrum.

for more such question on emission spectrum

https://brainly.com/question/24213957

#SPJ11

The pH at equivalence is 8.77.

The balanced chemical equation for the reaction between pyridine and HBr is:

C₅H₅N (aq) + HBr (aq) → C₅H₅NH + Br⁻ (aq)

The stoichiometry of the reaction is 1:1, which means that at equivalence, all of the pyridine will have reacted with the HBr. We can use the concentration of the HBr solution and the initial volume of the pyridine solution to calculate the number of moles of HBr added:

n(HBr) = C(HBr) × V(HBr) = 0.5979 mol/L × (V(eq) - 160.0 mL)

where V(eq) is the total volume of the solution at equivalence.

At equivalence, the number of moles of HBr added is equal to the number of moles of pyridine in the initial solution:

n(HBr) = n(C₅H₅N) = C(C₅H₅N) × V(C₅H₅N) = 0.6073 mol/L × 160.0 mL / 1000 mL = 0.097168 mol

Therefore, we can solve for V(eq):

V(eq) = n(HBr) / C(HBr) + 160.0 mL = 0.097168 mol / 0.5979 mol/L + 160.0 mL = 320.52 mL

The concentration of the pyridine cation C₅H₅NH⁺ at equivalence is equal to the concentration of the pyridine anion C₅H₅N in the initial solution, since they have the same stoichiometric coefficient in the balanced equation:

C(C₅H₅NH⁺) = C(C₅H₅N) = 0.6073 mol/L

The pKa of pyridine can be related to the pKb by the equation:

pKa + pKb = 14

Therefore, the pKb of pyridine is:

pKb = 14 - 8.77 = 5.23

At equivalence, the reaction produces an acidic solution, since the HBr is a strong acid and the pyridine cation is a weak base. The pH can be calculated using the Henderson-Hasselbalch equation:

pH = pKa + log([A⁻]/[HA])

where A⁻ is the pyridine anion C₅H₅N and HA is the pyridine cation C₅H₅NH⁺.

At equivalence, the concentrations of [tex]A^-[/tex] and HA are equal, and the pH simplifies to:

pH = pKa + log(1) = pKa = 8.77

For more such questions on pH.

https://brainly.com/question/15187703#

#SPJ11

The opposite force called as inertia is pushing against the bin and preventing it from moving. An object's propensity to resist modifications to its motion is known as inertia.

Because of the bin's inertia and Miranda's insufficient effort, the bin is not moving in this instance. In other words, the trashcan stays still because the force of inertia is larger than the force Miranda is exerting.

An object's propensity to resist changes in motion, either by remaining at rest or by continuing to travel in a straight path at a constant speed, is known as inertia.

Given the situation, the bin is not moving because Miranda is exerting more force than the force of inertia. The power Miranda exerts is insufficient to overcome the bin's inertia and start it moving.

The relationship between inertia and mass is that the inertia increases with mass. In the instance of the bin, it can have a big mass, necessitating a sizable force to move it. Stronger pressure from Miranda might be able to overcome the bin's inertia and cause it to move.

Learn more about inertia   at :

https://brainly.com/question/11049261

#SPJ1