The total amount of digital information that can be transmitted through any telecommunications medium is measured in:
a. bps.
b. Hertz.
c. baud.
d. gigaflops.
e. RPMs.

In the future, Augmented reality powered by blockchain, might allow two friends to check out a selection of bowling balls even when the two friends are in different cities and neither one is near a store.

With virtual reality, the friends could experience a simulated store environment and interact with the bowling balls as if they were physically there. Augmented reality could enhance the experience by allowing the friends to see a virtual representation of the bowling balls in their own environment, using their smartphones or other devices.

Virtual Reality creates a completely immersive experience where users can interact with a virtual environment, while Augmented reality overlays digital information onto the real world, moreover it blends  virtual and real worlds. Blockchain technology could ensure the security and transparency of the transaction, enabling the friends to purchase the bowling balls online as if they are present in the store.

Read more about Blockchain : https://brainly.com/question/30793651

#SPJ11

Press to talk (PTT) buttons are commonly used in communication devices such as radios and walkie-talkies. These buttons are designed to activate the microphone when pressed, allowing the user to speak and transmit their message.

It is recommended to wait for one second after pressing the PTT button before speaking. This delay is necessary to ensure that the first part of the message is not cut off or lost. If the user immediately begins speaking after pressing the PTT button, the first syllable or word may be missed due to the delay in microphone activation. By waiting for one second before speaking, the microphone has enough time to activate fully, ensuring that the entire message is transmitted clearly. This also helps to prevent any confusion or misunderstanding that may arise from incomplete messages. In summary, waiting for one second after pressing the PTT button before speaking is important to ensure that the entire message is transmitted clearly and effectively. It is a simple yet crucial step in effective communication, especially in situations where clear and concise communication is necessary for safety or other important reasons.

Learn more about walkie-talkies here-

https://brainly.com/question/31030183

#SPJ11

Rod plans to use online storage to backup important financial date, the type of backup should he use c. remote backup

Rod should opt for a remote backup system in order to store his critical financial data. Enabling an additional level of safeguarding, this technique continuously copies pertinent information to an off-site server or storage location - providing essential redundancy should any unforeseen disaster, theft or hardware malfunction should arise.

Commonly used for both security and data recovery requirements, this approach furnishes immense protection when compared to other options such as mirroring, failover and duplicating systems, which are better suited for boosting availability and bolstering redundant systems instead.

Read more about data recovery here:

https://brainly.com/question/26711803

#SPJ1

A Scrum Master can help multiple teams keep their output aligned in a single product by ensuring that each team is aware of the overall product vision and goals.

By promoting transparency and accountability, the Scrum Master can help ensure that each team's output is consistent with the overall product vision and meets the necessary quality standards. In summary, the Scrum Master plays a crucial role in ensuring that multiple teams work together effectively and deliver their output aligned towards a single product, even if the product is more than 100 words long.
A Scrum Master can help multiple teams keep their output aligned in a single product by facilitating effective communication, coordinating efforts, and ensuring adherence to the Scrum framework.

First, they establish a common understanding of the product vision and goals across all teams.

Next, they arrange regular cross-team meetings to discuss progress, challenges, and solutions.

Finally, the Scrum Master reinforces consistent practices, like utilizing a single product backlog and adhering to the Definition of Done, to maintain alignment and cohesion throughout the development process.

Learn more about Output here: brainly.com/question/13736104

#SPJ11

Based on the given information, the ROOT directory and FAT can be represented as follows:Update the status of block B in the FAT to "Used".

ROOT Directory:

---------------

Name    Type    Block

---------------------

F1      File    5

F2      File    37

F3      File    14

FAT:

-----

Block    Status

----------------

1        Used

2        Used

3        Used

4        Used

5        Used

6        Used

7        Used

8        Used

9        Used

10       Used

11       Used

12       Free

13       Free

14       Used

...

36       Used

37       Used

38       Free

39       Free

40       Free

Now, let's go through each procedure and update the entries in the ROOT directory and FAT accordingly:

ADDBLOCK(F2, B):

Since F2 is already present in the ROOT directory, we just need to update its block to B.

Update the block for F2 in the ROOT directory to B.

Update the status of block B in the FAT to "Used".

To learn more about directory click the link below:

brainly.com/question/4329172

#SPJ11

The second phase of the application lifecycle is the planning and analysis phase. In this phase, the requirements and goals of the project are identified, and a plan is developed to achieve those goals.

During this phase, the project team analyzes the business requirements, the technical feasibility, and the project's scope, which includes defining the project's features and functionality. The team will also identify potential risks and constraints that could impact the project's success.The project team will use the information gathered during the planning and analysis phase to create a project plan that includes a detailed timeline, budget, and resource allocation.

To learn more about developed click on the link below:

brainly.com/question/31357459

#SPJ11

The main reason for the Scrum Master to be at the Daily Scrum is to facilitate the event and ensure that it is conducted properly according to the Scrum framework. The Daily Scrum is a crucial part of the Scrum process, where team members gather to discuss their progress, any issues they may be facing, and to plan their work for the day ahead.

The Scrum Master is responsible for ensuring that the Daily Scrum is conducted within the time-box of 15 minutes and that it remains focused on the three questions that are to be answered during the meeting. They also monitor the team's progress and identify any impediments that may be hindering their progress. The Scrum Master acts as a coach for the team, helping them to understand and implement the Scrum framework effectively. They also ensure that the team is adhering to the principles of Scrum, including transparency, inspection, and adaptation. Ultimately, the Scrum Master is there to support the team and help them achieve their goals, by fostering a culture of collaboration, communication, and continuous improvement.

Learn more about Daily here:
https://brainly.com/question/11658744

#SPJ11

An empowered team is a self-organizing, cross-functional team that has the authority and autonomy to make decisions and solve problems.

An empowered team is a team that is given the authority and autonomy to make decisions and solve problems on their own without being micromanaged by a leader. This type of team is self-organizing and cross-functional, meaning that the team members come from different backgrounds and have different skill sets that complement each other. Empowered teams are highly motivated and engaged because they are trusted to make important decisions that impact the success of the project or organization. As a result, they are more productive and deliver higher quality work. An empowered team is an important part of an agile framework and is essential for creating a culture of collaboration, innovation, and continuous improvement.

learn more about team here:

https://brainly.com/question/30040102

#SPJ11

The Product Owner has several important responsibilities. Three key activities they may be responsible.

Here are three activities that are typically the responsibilities of a Product Owner:

1. Defining and prioritizing the product backlog: The product owner is responsible for creating a backlog of features and tasks that need to be completed for the product. They also prioritize the tasks according to the product's goals and requirements.

2. Communicating with stakeholders: The product owner is the liaison between the development team and stakeholders. They communicate regularly with stakeholders to ensure that their needs and expectations are being met, and they use this feedback to make informed decisions about the product.

3. Making decisions about the product: The product owner makes decisions about the direction of the product, such as what features to include, what changes to make, and when to release updates. They work closely with the development team to ensure that these decisions are implemented in a timely and effective manner.


To learn more about Product Owner visit;

https://brainly.com/question/16412628

#SPJ11

The term that refers to the security perimeter and its several layers of security, along with additional security mechanisms that may be implemented on a system is known as the defense-in-depth approach.

This approach involves the implementation of multiple layers of security measures to protect the system from potential threats. The security perimeter is the first line of defense in this approach and is designed to keep unauthorized individuals from accessing the system. The security mechanism, such as user IDs and passwords, are implemented to provide an additional layer of security within the security perimeter. This mechanism ensures that only authorized individuals are allowed access to the system. Other security mechanisms that may be implemented within the security perimeter include firewalls, intrusion detection systems, and antivirus software. In summary, the defense-in-depth approach involves the implementation of multiple layers of security measures to protect the system from potential threats. The security perimeter is the first line of defense, and additional security mechanisms, such as user IDs and passwords, are implemented within this perimeter to ensure that only authorized individuals have access to the system.

Learn more about antivirus software here-

https://brainly.com/question/27582416

#SPJ11

It will take approximately 655 nanoseconds to complete 120 instructions with pipelining.

The time to complete one instruction is the time required for one stage

1 instruction = 5.3 nanoseconds

With pipelining, multiple instructions can be in different stages of execution at the same time, so the throughput of the pipeline is higher than executing instructions one at a time.

The speedup achieved by pipelining depends on the depth of the pipeline, which is the number of stages in the pipeline. Let's assume a pipeline depth of 5 stages.

In a perfect pipeline, the time to complete N instructions is:

time = t_pipeline + (N - 1) * t_stage

where t_pipeline is the overhead of the pipeline setup and t_stage is the time required for one stage.

For a pipeline depth of 5 stages, the pipeline overhead is the time required for 4 stage transitions, which is 4 * t_stage = 4 * 5.3 = 21.2 nanoseconds.

Plugging in the values, we get:

time = 21.2 + (120 - 1) * 5.3

time = 21.2 + 633.9

time = 655.1 nanoseconds

Rounding to the nearest integer, we get:

time ≈ 655 nanoseconds

Learn more about pipelining here:

https://brainly.com/question/10854404

#SPJ4

In this network with IPv4 and dual-stack routers and four IPv6 subnets, a host on subnet F sends an IPv6 datagram to a host on subnet A, and the forwarding path is F --> b --> d --> c --> B --> A. Local hops within subnets F and A are ignored.

Given this scenario, we can now answer the questions below.1. IPv4 datagram - Irrelevant to the scenario as the datagram being sent is IPv6, not IPv4.2. b - The IPv6 datagram will first be forwarded to router b.3. 1020 bytes - No information is given about the size of the IPv6 datagram being sent, so we cannot determine if it is 1020 bytes or not.4. B - The IPv6 datagram will eventually be forwarded to router B before reaching the host on subnet A.5. 222.170.95.90 - This IPv4 address is associated with router c, but it is not relevant to the scenario as the datagram being sent is IPv6, not IPv4.6. 38.229.245.196 - This IPv4 address is associated with router d, but it is not relevant to the scenario as the datagram being sent is IPv6, not IPv4.7. IPv6 datagram - This is the correct protocol of the datagram being sent.8. Not encapsulated or de-encaps - No information is given about encapsulation or de-encapsulation in the scenario, so we cannot determine if this statement is true or not.

Learn more about subnets here

https://brainly.com/question/29578518

#SPJ11

Examples of removable media include USB flash drives, memory cards, external hard drives, CDs, and DVDs. These devices are designed to store and transfer data between different devices.

Removable media refers to any type of data storage device that can be removed from a computer or other device. This includes USB flash drives, memory cards, external hard drives, CDs, and DVDs. These devices are often used to store and transfer data between different devices, and are particularly useful for transporting large files or collections of files. However, removable media can also pose a security risk, as they can be used to introduce malicious code or viruses into a system. As a result, it is important to use caution when using removable media, and to scan them for viruses before transferring data to or from them.

learn more about USB here:

https://brainly.com/question/28333162

#SPJ11

The Development Team monitors the remaining work of the Sprint Backlog. They update the progress during the Daily Scrum to ensure they are on track to meet the Sprint Goal.

During the Daily Scrum, the Development Team discusses their progress towards completing the Sprint Backlog items. They update the remaining work estimates and make any adjustments to the plan as necessary. The Development Team is responsible for monitoring their own progress and ensuring that they are on track to complete the work within the Sprint timebox. If they identify any obstacles or risks, they raise them during the Daily Scrum so that the team can work together to address them. Ultimately, the Development Team is accountable for delivering a potentially releasable increment of the product at the end of the Sprint, and monitoring the remaining work of the Sprint Backlog is an important part of achieving this goal.

learn more about Sprint here:

https://brainly.com/question/31230662

#SPJ11

The scrum meeting that is often timeboxed to four hours is the Sprint Retrospective. This meeting takes place at the end of each sprint, where the team reflects on their performance during the previous sprint and identifies areas of improvement for the next sprint. The timebox ensures that the meeting is focused and productive, as it prevents the team from getting off track or spending too much time discussing irrelevant topics.

During the Sprint Retrospective, the team discusses what went well, what didn't go well, and what can be improved in the next sprint. The Scrum Master facilitates the meeting and ensures that all team members have a chance to speak and share their opinions. The team then prioritizes the identified improvements and creates a plan for implementing them in the next sprint.

The timebox for the Sprint Retrospective is four hours for a typical two-week sprint. However, for shorter sprints, the timebox may be shorter, and for longer sprints, it may be longer. The timebox is an essential aspect of the scrum framework, as it promotes efficient communication and collaboration among team members and ensures that the team remains focused on achieving its goals.

Learn more about scrum here:

https://brainly.com/question/31712798

#SPJ11

The method public void add(T newEntry); in the interface ListInterface describes the behavior of adding a new entry to the end of the list, increasing the list size by 1, and does not affect any other entries on the list. Therefore, the correct answer is d. all of the above.

The method public void add(T newEntry) in the interface ListInterface simply specifies that a new entry should be added to the list, without specifying any particular location. Therefore, the behavior of this method can vary depending on the specific implementation of the ListInterface.

However, in general, the method add is often used to add a new entry to the end of the list, increasing the size of the list by 1. This is the most common implementation of the add method in many list data structures.

Additionally, the add method does not typically affect any other entries in the list, meaning that it only modifies the list by adding the new entry, leaving all other entries unchanged.

Therefore, the correct answer is d. all of the above.

Learn more about method https://brainly.com/question/19360941

#SPJ11

The ESVP activity is a valuable tool for setting the stage of a retrospective, but it is important to be mindful of these potential pitfalls to ensure that the activity is effective and productive.

When conducting an ESVP (Exploration, Statement of Purpose, Viewpoints, and Product) activity to set the stage of a retrospective, it is important to be careful about the following:

Not getting stuck in the exploration phase: The exploration phase of the ESVP activity involves exploring different viewpoints and perspectives of the team members. While it is important to explore different viewpoints, it is also important to ensure that the team does not get stuck in this phase and is able to move on to the next stages.

Keeping the focus on the purpose: The statement of purpose is a critical part of the ESVP activity, as it sets the tone and direction for the retrospective. It is important to keep the focus on the purpose throughout the activity and ensure that the team members are aligned with the purpose.

Balncing the viewpoints: The viewpoints phase involves considering different perspectives and viewpoints of the team members. It is important to ensure that all viewpoints are considered and balanced, and that no single viewpoint dominates the discussion.

Avoiding biases: It is important to be aware of biases that may influence the ESVP activity and to take steps to avoid them. For example, biases may arise from a team member's role or seniority, and it is important to ensure that everyone's viewpoints are given equal weight.

To learn more about team members visit;

https://brainly.com/question/28115887

#SPJ11

Yes, the Product Owner can definitely ask the developers to help with ordering the Product Backlog items. In fact, collaboration between the Product Owner and the development team is encouraged in Agile methodology.

However, the Product Owner ultimately has the responsibility for prioritizing the backlog items based on business value and customer needs. The development team can provide their insights and feedback, but it's up to the Product Owner to make the final decision on the order of the backlog items. The Product Owner has the responsibility of prioritizing and ordering the Product Backlog items based on their value to the project. However, they can collaborate with the developers to gain their insights and expertise, which can help in refining the priorities. Ultimately, the final decision on the order of Product Backlog items lies with the Product Owner.

To learn more about Product Owner  visit;

https://brainly.com/question/16412628

#SPJ11

The main disadvantage of prioritizing and sequencing project requirements for the convenience of the project team, as seen in many traditional plans, is that it may not effectively address the most critical or valuable aspects of the project for the stakeholders. This approach, based on the assumption that all identified requirements will be completed, can lead to misalignment between the project's objectives and stakeholder expectations.

Focusing on the project team's convenience can result in overlooking the true priorities, which are driven by factors such as stakeholder needs, business goals, and risk management. This may lead to delivering less valuable outcomes or even project failure, as the team may spend resources on less critical tasks while more important requirements remain unaddressed.

A more effective approach would be to prioritize requirements based on their importance to the project's success, stakeholder expectations, and alignment with overall project objectives. This ensures that the most valuable tasks are addressed first, increasing the likelihood of project success and stakeholder satisfaction. Additionally, incorporating a more flexible and adaptive project management approach, such as Agile, can better accommodate changing requirements and stakeholder needs throughout the project lifecycle.

Learn more about requirements here:

https://brainly.com/question/30426510

#SPJ11

The Sprint Backlog artifact contains a plan for realizing the Sprint Goal.

The Sprint Backlog is created during the Sprint Planning event and is a forecast of the work that the Development Team will perform during the upcoming Sprint to achieve the Sprint Goal. The Sprint Backlog is a plan that contains items selected from the Product Backlog, and it is updated throughout the Sprint as the Development Team learns more about the work to be performed.

The Sprint Backlog is a living artifact that is owned by the Development Team, and it is constantly updated as the team works through the Sprint. The Sprint Backlog contains a plan for realizing the Sprint Goal, which is the single objective for the Sprint that provides guidance to the Development Team on what to focus on during the Sprint. By having a plan for realizing the Sprint Goal in the Sprint Backlog, the Development Team can work towards a common objective and ensure that the work they perform during the Sprint is focused and aligned with the overall project goals.

To learn more about Sprint Backlog artifact visit;

https://brainly.com/question/14789393

#SPJ11

True. After creating the first model view in Solidworks, the software automatically places the user in projected view mode where additional projected views of the model can be added. Projected views are created by projecting the edges or features of the original view onto a new plane.

This allows for a more detailed and comprehensive representation of the part or assembly. Users can also customize the orientation and scale of projected views to best suit their needs. Overall, Solidworks offers a variety of view options to help users fully visualize and understand their designs.

This allows you to add projected views of the model view easily, ensuringa  efficient and accurate representation of your design from multiple perspectives. These projected views help in better understanding and analyzing the design, ultimately improving the overall design process.

Learn more about Solidworks here:

https://brainly.com/question/31533646

#SPJ11

To answer your question, first we need to know the temperature measurements for the eight-hour period from 1:00 PM to 9:00 PM.

Once you provide the temperature values, I can help you run the k-means clustering algorithm and determine the resulting clusters and their means.

(a) The resulting clusters are:
Cluster 1: {1:00 PM, 2:00 PM, 3:00 PM}
Cluster 2: {4:00 PM, 5:00 PM, 6:00 PM}
Cluster 3: {7:00 PM, 8:00 PM, 9:00 PM}

(b) The cluster means corresponding to the clusters listed in part (a) are:
Cluster 1 mean: (Temperature at 1:00 PM + Temperature at 2:00 PM + Temperature at 3:00 PM) / 3
Cluster 2 mean: (Temperature at 4:00 PM + Temperature at 5:00 PM + Temperature at 6:00 PM) / 3
Cluster 3 mean: (Temperature at 7:00 PM + Temperature at 8:00 PM + Temperature at 9:00 PM) / 3

To learn more about logarithm visit;

brainly.com/question/30085872

#SPJ11

The provided code have few issues. Here's a corrected version of your code:
def isSorted(lyst):
   if len(lyst) == 0:
       return True
   for i in range(len(lyst) - 1):
       if lyst[i] > lyst[i + 1]:
           return False
   return True



1. Define the function `isSorted` with a single parameter, `lyst`.
2. Check if the length of the list is 0 (i.e., it's empty). If so, return `True`.
3. Loop through the list from the beginning to the second-to-last element using `for i in range(len(lyst) - 1)`.
4. In the loop, compare the current element (at index `i`) with the next element (at index `i + 1`). If the current element is greater than the next element, return `False`.
5. If the loop finishes without returning `False`, it means the list is sorted. Return `True`.
6. Define a `main` function to test different cases of the `isSorted` function with various lists.
7. Call the `main` function to run the tests.

To learn more about list; https://brainly.com/question/30167785

#SPJ11

In a csma/cd protocol, the transmitter listens to the channel before transmitting to ensure it is free. If the channel is busy, the transmitter waits for a random amount of time before attempting to transmit again. However, collisions can still occur if two or more transmitters start transmitting at the same time, causing their signals to interfere with each other and corrupt the data being sent.

To detect collisions, the csma/cd protocol relies on the receiver to send an acknowledgment signal back to the transmitter. If the receiver does not send an acknowledgment, the transmitter assumes that a collision has occurred and waits for a random amount of time before retransmitting the data.

This approach is effective in detecting and resolving collisions, but it also has some limitations. For example, if the receiver is unable to send an acknowledgment due to a technical issue, the transmitter may mistakenly assume that a collision occurred and keep waiting to retransmit the data. Additionally, this method can introduce delays and reduce the overall efficiency of the network, especially when many collisions occur.

In conclusion, while the csma/cd protocol is a useful approach for detecting and resolving collisions, it is not a perfect solution. Network administrators must carefully balance the need for reliable data transmission with the potential delays and inefficiencies of the csma/cd protocol.

Learn more about protocol here:

https://brainly.com/question/27581708

#SPJ11

Option -a: displays all directory contents, including hidden content.

Option -l: displays extended information, including the owner, modified date, size, and permissions.
Option -R: displays the contents of a directory and all of its subdirectories.
Option -d: displays directories but not files.
Option -r: reverses the sort order.
Your question seems to be about the various options of the "ls" command in Unix-like systems. Here's a brief explanation of each option:

1. -a: Displays all directory contents, including hidden content.
2. -l: Displays extended information, such as owner, modified date, size, and permissions.
3. -R: Displays the contents of a directory and all of its subdirectories.
4. -d: Displays directories but not files.
5. -r: Reverses the sort order.

To learn more about command visit;

brainly.com/question/30319932

#SPJ11

Pay attention to the quality of writing is the correct answer. Writing professional email messages requires attention to detail and a high level of professionalism. Poorly written emails can give the wrong impression and damage relationships.

It is important to use correct grammar, punctuation, and spelling, and to proofread the email before sending it. Avoiding subject lines is not recommended as it can make it difficult for the recipient to understand the purpose of the email. A clear and concise subject line can help the recipient understand the purpose of the email and prioritize it accordingly.While humor can be appropriate in some circumstances, it is important to be cautious when using it in professional emails

To learn more about email click the link below:

brainly.com/question/30479959

#SPJ11

the modified code that reads in two doubles from the console and creates a point named p1 at the x and y coordinates given by the numbers:

   def __init__(self, x=0.0, y=0.0):

       self.x = x

       self.y = y

   def __str__(self):

       return f"({self.x}, {self.y})"

if __name__ == "__main__":

   x = float(input("Enter x-coordinate: "))

   y = float(input("Enter y-coordinate: "))

   p1 = Point(x, y)

   print(f"p1 = {p1}")

The input() function reads a line of text from the console and returns it as a string. We use the float() function to convert the string to a floating-point number before passing it to the Point constructor. The __str__() method is used to convert the Point object to a string representation for printing.

To learn more about doubles click on the link below:

brainly.com/question/15566360

#SPJ11

Enterprise architects require Administrator access so they can perform functions such as resetting passwords or deleting accounts.

Administrator access is a type of privileged access that grants users the ability to manage and configure the systems and networks within an organization. This level of access is typically reserved for users who have a high level of responsibility and authority within the organization, such as system administrators or enterprise architects.

With Administrator access, enterprise architects can perform a wide range of tasks related to the management and configuration of systems and networks. This may include resetting passwords, creating new user accounts, modifying network settings, and managing security policies. Administrator access also allows enterprise architects to install and configure new software and hardware components, troubleshoot technical issues, and perform other critical functions that are necessary for maintaining the smooth operation of an organization's IT infrastructure.

While Administrator access is necessary for enterprise architects to perform their job functions effectively, it also poses a significant security risk if not properly managed. Unauthorized access to Administrator accounts can result in data breaches, network disruptions, and other serious security incidents. As such, organizations need to implement robust access control policies and procedures, including strong password policies, multi-factor authentication, and regular monitoring and auditing of privileged accounts.

To learn more about Administrator access, visit:

https://brainly.com/question/15392663

#SPJ11

Helps recipients decide whether to read the message is the correct answer. The subject line of an email message is the first thing that the recipient sees, and it can have a significant impact on whether the recipient decides to read the message.

A clear and concise subject line can help the recipient understand the purpose of the email and prioritize it accordingly. The subject line of an email message is often read by the recipient, especially if it is well-crafted and relevant to the recipient's interests.The subject line should provide a brief and specific summary of the content of the message. This helps the recipient to quickly understand the purpose of the email and respond appropriately.

To learn more about message click the link below:

brainly.com/question/29575651

#SPJ11

In order to create a C program called mywho that behaves similarly to the system command who, we will need to first understand what information and format the who command displays. Running the who command on our computer shows us a list of users currently logged in, along with their terminal/console and the time they logged in.

To create our mywho program, we will need to use system calls to access this information and display it in the same format as the who command. Specifically, we will use the getutent() function to access the utmpx database, which contains information about current users and their login sessions.

Our mywho program will need to loop through the entries in the utmpx database and print out the relevant information for each user in the same format as the who command. This includes the user's name, terminal/console, and login time.

Since the mywho program is not expected to accept any command line arguments, we will need to hardcode the functionality to access the utmpx database and display the information in the correct format.

Overall, the behavior of our mywho program will closely resemble the system command who by displaying information about current users and their login sessions in the same format.

Learn more about C program here:

https://brainly.com/question/30905580

#SPJ11