the value of the total radiant energy flux density at the earth from the sun normal to the incident rays is called the solar constant of the earth. the observed value integrated over all emission wavelengths and referred to the mean earth-sun distance is:

After switch S is closed, the capacitors in the circuit start to discharge.

The initial stored energy in the capacitors is given by [tex]1/2*C*V^2[/tex],

where C is the capacitance of the capacitors and V is the initial voltage across them.

As the capacitors discharge, the voltage across them decreases and so does the stored energy.

When the capacitors have lost 80.0% of their initial stored energy, the voltage across them will be 0.447 times the initial voltage.

At this point, the current in the circuit can be calculated using Ohm's law, which states that the current is equal to the voltage divided by the total resistance of the circuit.

Therefore, the current in the circuit at this point can be calculated as I = V/R, where V is the voltage across the capacitors and R is the total resistance of the circuit.

For more such answers on Capacitance
https://brainly.com/question/16998502

#SPJ11

The speed of the raft immediately after the diver jumps is 0.6 m/s.

After the swimmer jumps, the momentum of the system is still conserved, but it is no longer zero, since the swimmer is now moving. We can use the equation:

(m1v1 + m2v2)before = (m1v1 + m2v2)after

We want to solve for v2, velocity of the raft immediately after the jump.

Before jump, velocity of  raft is zero, so we can simplify  equation to:

m1v1 = m2v2

Substituting in  values we know, we get:

60 kg * 1.5 m/s = 150 kg * v2

Simplifying, we get:

v2 = (60 kg * 1.5 m/s) / 150 kg = 0.6 m/s

So the speed of the raft immediately after the diver jumps is 0.6 m/s.

To know more about momentum, here

brainly.com/question/30677308

#SPJ4

The magnetic field on the axis of the solenoid is 5.03 × 10⁻⁴ T.

The magnetic field on the axis of a solenoid can be calculated using the formula:

B = μ₀ * n * I

Where B denotes the intensity of the magnetic field, 0 denotes the permeability of empty space, n denotes the number of turns per unit length, and I is the current flowing through the solenoid.

In this case, the solenoid is 1 meter long and has 200 turns, so n = 200 turns / 1 meter = 200 turns/meter. The solenoid is delivering 2A of current.

The value of μ₀ is a constant, equal to 4π × 10⁻⁷ T·m/A

When we enter these values into the formula, we get:

B = μ₀ * n * I

= 4π × 10⁻⁷ T·m/A * 200 turns/m * 2A

= 5.03 × 10⁻⁴ T

Therefore, the magnetic field on the axis of the solenoid is 5.03 × 10⁻⁴ T.

Learn more about  magnetic field

https://brainly.com/question/14848188

#SPJ4

magnetic field on the axis of the solenoid is approximately 0.005 T

Solution -  Hi! To calculate the magnetic field on the axis of a solenoid, you can use the formula:

Magnetic field (B) = μ₀ * n * I . (applicable for ideal long solenoid)

where μ₀ is the permeability of free space (approximately 4π x 10^-7 Tm/A), n is the number of turns per unit length, and I is the current.

In your case, the solenoid is 1 meter long with 200 turns and carries a 2 A current. To find n, divide the number of turns by the length:

n = 200 turns / 1 m = 200 turns/m

Now, plug the values into the formula:

B = (4π x 10^-7 Tm/A) * (200 turns/m) * (2 A)

B ≈ 0.005 T

The magnetic field on the axis of the solenoid is approximately 0.005 T (Tesla).

To learn more about solenoid, click on this

brainly.com/question/22043434

#SPJ11

Voyager 1 will continue moving with the speed it will have when the fuel runs out. The probe is traveling through the vacuum of space, where there is negligible gravity and no significant air resistance to slow it down.

Without the ability to adjust its trajectory, Voyager 1 will continue on its current path indefinitely unless it encounters a gravitational field that alters its trajectory. The probe may eventually drift off course and potentially collide with other celestial objects in its path. While Voyager 1 will continue to communicate data to Earth until its systems eventually fail, it will eventually become just another piece of space debris, floating silently through the cosmos.

Learn more about Voyager 1

https://brainly.com/question/3412409

#SPJ4

The equivalent capacitance of the new circuit with an identical capacitor added in series is half of the original circuit's capacitance.

When a second capacitor, identical to the original, is added in series to the circuit, the equivalent capacitance of the new circuit is reduced. This is because the total capacitance in a series circuit is always less than the individual capacitances. The formula for calculating the equivalent capacitance of a series circuit is:

[tex]1/Ceq = 1/C1 + 1/C2 + ... + 1/Cn[/tex]

Where C1, C2, ..., Cn are the capacitances of the individual capacitors.

Adding another capacitor in series to the circuit means that the equivalent capacitance will be smaller, and the total charge stored in the circuit will be less. This will affect the behavior of the circuit when connected to a voltage source, as it will take less time to charge and discharge.

Learn more about circuit's capacitance.

https://brainly.com/question/28884207

#SPJ4

Based on the provided initial velocity; The cliff was approximately 143.1 meters tall., The box fell approximately 54 meters away from the base of the cliff.

To find the height of the cliff, we can use the following kinematic equation for vertical motion:

y = y0 + v0_yt + 0.5a_y*t⁻².

where:

y = final vertical position

y0 = initial vertical position (0, since we start from the top of the cliff)

v0_y = initial vertical velocity (0, since the box is shoved horizontally)

a_y = vertical acceleration (9.81 m/s², due to gravity)

t = time (5.4 seconds)

Plugging in the values, we get:

y = 0 + 05.4 + 0.59.815.4²

y = 0.59.8129.16

y = 4.90529.16

y = 143.1 m

To find how far away the box fell from the base of the cliff, we can use the following equation for horizontal motion:

x = x0 + v0_x*t

where:

x = final horizontal position

x0 = initial horizontal position (0, since we start from the edge of the cliff)

v0_x = initial horizontal velocity (10 m/s)

t = time (5.4 seconds)

Plugging in the values, we get:

x = 0 + 10*5.4

x = 54 m

To know more about  initial velocity visit:-

brainly.com/question/14295901

#SPJ1

Based on the Doppler effect, the electromagnetic waves reaching Earth from a galaxy that is moving away from Earth would experience a decrease in frequency.

option C.

The Doppler effect is a phenomenon where the frequency of waves (such as electromagnetic waves or sound waves) is shifted as a result of the relative motion between the source of the waves and the observer. When a source of waves is moving away from an observer, the waves get stretched out, resulting in a decrease in frequency. This is known as redshift for light waves, which are a type of electromagnetic waves.

In the context of a galaxy moving away from Earth, the electromagnetic waves (such as light) emitted by the galaxy would experience a redshift, which means the frequency of the waves would decrease. This is a key observation in astronomy and cosmology that has been used to provide evidence for the expanding universe and the Big Bang theory, as galaxies in the universe are generally observed to be moving away from each other, causing their light to be redshifted.

Learn more about doppler effect here: https://brainly.com/question/3841958

#SPJ1

The circled vector on the diagram below represents the tension on the rope.

The option C is correct

Tension is described as  the force transmitted through a string, rope, cable or wire when it is pulled tight by forces acting from opposite ends.

T = mg + ma

We know that the force of tension is calculated using the formula T = mg + ma.

In other terms, the pulling force that runs the length of a flexible connector, such a rope or cable, is known as tension. It is always pointed away from the force-applying object and along the length of the connector.

Learn more about tension at: https://brainly.com/question/24994188

#SPJ1

Distance the masses on the right of the fulcrum need to be to balance with the two masses on the left is (3.5kgm - x kg * d m) / 1kg

In order for a lever to be balanced, the moments on either side of the fulcrum need to be equal. The moment is calculated by multiplying the distance from the fulcrum by the mass of the object. Therefore, to balance the two masses on the left of the fulcrum with the masses on the right, we need to calculate the moment on each side and make them equal.

Let's assume the masses on the left of the fulcrum are 2kg and 3kg, and the masses on the right are x kg and y kg, respectively. If the distance between the fulcrum and the 2kg mass is 1m, and the distance between the fulcrum and the 3kg mass is 0.5m.

we can calculate the moments on each side as follows:

Moment on the left side = 2kg x 1m + 3kg x 0.5m = 2kg + 1.5kg = 3.5kgm

Moment on the right side = x kg * d m + y kg * e m

where d and e are the distances between the fulcrum and the masses on the right.

To make the moments equal, we can set them equal to each other:

3.5kgm = x kg * d m + y kg * e m

If we know the mass of one of the objects on the right, we can solve for the distance needed for the other mass to balance the lever. For example, if we know the mass of the object closest to the fulcrum is 1kg.

we can rearrange the equation to solve for e:

e = (3.5kgm - x kg * d m) / 1kg

Once we know the distance needed for the other mass, we can set up the lever accordingly and it should be balanced.

The Question was Incomplete, Find the full content below :

A balanced lever has two weights on it, the masses on the left of the fulcrum are 2kg and 3kg, and the masses on the right are x kg and y kg. If the distance between the fulcrum and the 2kg mass is 1m, and the distance between the fulcrum and the 3kg mass is 0.5m.what is the distance the masses on the right of the fulcrum need to be to balance with the two masses on the left?

know more about mass of the object here:

https://brainly.com/question/1882842

#SPJ11

The frequency of the waves on the string is 20 Hz.

The velocity of waves on a string is given by the equation:

v = λf

where v is the velocity of the wave, λ is the wavelength, and f is the frequency of the wave.

We are given that the velocity of waves on the string is 10 m/s and that successive peaks (or troughs) are 0.50 m apart. This distance is equal to the wavelength (λ) of the wave. Therefore, we can write:

λ = 0.50 m

Substituting this value and the given velocity into the equation above, we get:

10 m/s = (0.50 m) f

Solving for f, we get:

f = 10 m/s / 0.50 m = 20 Hz

To know more about Velocity:

https://brainly.com/question/30559316

#SPJ4

The wavelength of a radio photon from an AM radio station broadcasting at 1270 kilohertz is 236 meters.

To find the wavelength of a radio photon from an AM radio station broadcasting at 1270 kilohertz, we can use the formula:
wavelength (λ) = speed of light (c) / frequency (f)

1. First, we need to convert the frequency from kilohertz to hertz:
1270 kilohertz = 1270 * 10³ hertz = 1,270,000 hertz

2. Next, we will use the speed of light, which is approximately 3.00 * 10⁸ meters per second (m/s).

3. Now, we can plug in the values into the formula:
wavelength (λ) = (3.00 * 10⁸ m/s) / (1,270,000 Hz)

4. Calculate the wavelength:
λ ≈ 236.22 meters

5. Finally, express the answer to three significant figures and include the appropriate units:
λ ≈ 236 meters

Learn more about wavelength:

https://brainly.com/question/10750459

#SPJ11

When the distance between two charges is halved, the electrical force between the charges quadruples. This is due to the inverse square relationship between distance and electrical force, which means that when distance is halved, the force increases by a factor of 4.

The electrical force between the charges quadruples when the distance between them is halved. This is due to Coulomb's Law, which states that the electrical force (F) between two charges (q1 and q2) is directly proportional to the product of the charges and inversely proportional to the square of the distance (r) between them. Mathematically, it can be expressed as:

F = k * (q1 * q2) / r^2

When the distance (r) is halved, the denominator (r^2) becomes 1/4 of its original value, which causes the electrical force (F) to be 4 times greater, or quadruple.

To learn more about quadruples please visit:

https://brainly.com/question/7966538

#SPJ11

As a planet orbits a star, it makes a big ellipse, but its gravity has a similar effect on the star, causing the star to make a small star. This is called the "gravitational wobble" or "stellar wobble".

As a planet orbits a star, it follows an elliptical path due to the gravitational pull of the star. The shape of the planet's orbit is determined by the balance between the gravitational force of the star and the planet's own motion. However, the planet's gravity also affects the star, causing it to move slightly in response to the planet's pull. This motion of the star is much smaller than that of the planet, but it is still measurable and can be observed. This phenomenon is known as the planet's gravitational influence on the star, which causes the star to wobble slightly. This effect is used by astronomers to detect and study exoplanets orbiting distant stars.

To learn more about gravitational wobble, refer:-

https://brainly.com/question/31168966

#SPJ11

The phenomenon that occurs when a planet orbits a star, causing both the planet and the star to make elliptical motions due to their mutual gravitational effects.

This phenomenon is known as the "wobble" or "stellar wobble" and is caused by the gravitational interaction between a planet and its star. As a planet orbits a star, it exerts a gravitational force on the star, causing it to move slightly in response. This movement results in a small, periodic shift in the star's spectral lines, which can be detected by astronomers.

By analyzing this shift, astronomers can determine the presence, size, and orbital characteristics of planets around other stars. At the same time, the planet's gravity also affects the star, causing the star to make a smaller elliptical motion in response. This mutual gravitational interaction results in the observed stellar wobble.

To know more about stellar wobble:

https://brainly.com/question/29542172

#SPJ11

Sure, here are the steps to rank the fictitious stars based on their brightness as seen from Jupiter:

Determine the distance of each star from Jupiter. The closer a star is to Jupiter, the brighter it will appear in the sky.

Use the inverse square law to calculate the relative brightness of each star as seen from Jupiter.

The inverse square law states that the brightness of an object decreases with the square of its distance from the observer.

So, if star A is twice as far away from Jupiter as star B, it will appear four times dimmer than star B.

Rank the stars based on their relative brightness.

The star that appears brightest from Jupiter will be ranked first, while the star that appears dimmest will be ranked last.

Keep in mind that the brightness of a star also depends on its intrinsic brightness, or luminosity.

A star with a higher luminosity will appear brighter than a star with a lower luminosity, even if they are at the same distance from Jupiter.

However, since the set of stars is fictitious and we do not have information about their intrinsic brightness, we cannot take this factor into account in our ranking.

Overall, to rank the fictitious stars based on their brightness as seen from Jupiter, we need to consider their distance from Jupiter and use the inverse square law to calculate their relative brightness.

To know more about  fictitious stars :

https://brainly.com/question/15156213

#SPJ11

The solid forms of ice last longer because there is more weight with less surface area. This statement is false.

Factors like temperature, shape, size, humidity and impurities are some of the factor decides the time for which the ice survives. Even though larger ice particles may have more surface area than solid forms of ice, this does not always imply that they will persist longer.

In reality, due to the insulating effect of the ice itself, larger ice formations, like glaciers, can melt more quickly. In the end, a complex combination of physical, chemical, and environmental elements determines how long ice will last.

To know more about Melting of ice, visit,

https://brainly.com/question/1079154

#SPJ4

One should drink a lot of water to maximise evaporative water loss in order to make a day walk in the Mojave Desert, where the temperature is 49 degrees Celsius, not fatal.

This will support hydration levels maintenance and temperature control. Wearing loose, light-colored clothing, taking breaks in the shade, and taking off your shirt to promote radiative heat loss can also help reduce surface area to maximise convection. However, it is not advised to take aldosterone-suppressing medication without a doctor's supervision.

Human physiology, which is covered in PSIO 305, teaches students how the body functions in various situations. The body may be subjected to intense heat in the Mojave Desert, which can cause dehydration and disorders associated with heat. Staying hydrated and controlling body temperature through sweating and evaporative water loss are crucial to avoiding this. Reduce heat absorption by dressing appropriately, taking rests in the shade, and using air conditioning. Aldosterone is a hormone that controls electrolyte balance; nevertheless, taking medicine to inhibit it might have consequences and is not advised without a doctor's supervision.

learn more about temperature here:

https://brainly.com/question/7323169

#SPJ11

One should drink a lot of water to maximise evaporative water loss in order to make a day walk in the Mojave Desert, where the temperature is 49 degrees Celsius, not fatal.  Option d.

This will support hydration levels maintenance and temperature control. Wearing loose, light-colored clothing, taking breaks in the shade, and taking off your shirt to promote radiative heat loss can also help reduce surface area to maximise convection. However, it is not advised to take aldosterone-suppressing medication without a doctor's supervision.

Human physiology, which is covered in PSIO 305, teaches students how the body functions in various situations. The body may be subjected to intense heat in the Mojave Desert, which can cause dehydration and disorders associated with heat. Staying hydrated and controlling body temperature through sweating and evaporative water loss are crucial to avoiding this.

Reduce heat absorption by dressing appropriately, taking rests in the shade, and using air conditioning. Aldosterone is a hormone that controls electrolyte balance; nevertheless, taking medicine to inhibit it might have consequences and is not advised without a doctor's supervision.

learn more about temperature here:

brainly.com/question/7323169

#SPJ4

Full Question: How might you utilize your recently acquired knowledge from PSIO 305 to make a daytime hike in the 49 degree Celsius Mojave Desert non-deadly?

a. decrease surface area to maximize convection

b. all of the above

c. take medication to suppress aldosterone

d. drink lots of water to increase evaporative water loss

e. take off your shift to increase radiative heat loss

Answer:

C

Explanation:

Glass is one of the objects included in an insular so glass rod will be the final ans.

Maxwell's equations are a complete description of electric and magnetic fields. There are four equations in Maxwell's equations. These four equations are:

1. Gauss's Law for Electric Fields: Describes the relationship between electric charges and the electric field produced by them.
2. Gauss's Law for Magnetic Fields: States that there are no magnetic monopoles, and the magnetic field lines are always closed loops.
3. Faraday's Law of Electromagnetic Induction: Describes the induced electromotive force (EMF) in a closed circuit produced by a changing magnetic field.
4. Ampere's Law with Maxwell's Addition: Relates the magnetic field around a closed loop to the electric current passing through the loop and the rate of change of the electric field.

These four equations collectively provide a comprehensive description of electric and magnetic fields and their interactions.

To know more about Ampere's Law with Maxwell's Addition:

https://brainly.com/question/29831953

#SPJ11

The angle between the wire and the magnetic field is approximately 33.6 degrees.

To find the angle between the wire and the magnetic field, we will use the following formula for the magnetic force per meter on a wire:

F = BIL sin(θ)

where F is the magnetic force per meter, B is the magnetic field strength, I is the current flowing through the wire, L is the length of the wire, and θ is the angle between the wire and the magnetic field.

Given that the magnetic force is only 55% of its maximum possible value, we can write the equation as:

0.55 * F_max = BIL sin(θ)

The maximum force occurs when sin(θ) = 1, which means:

F_max = BIL

Now, we can substitute F_max back into our first equation:

0.55 * BIL = BIL sin(θ)

Now, divide both sides by BIL:

0.55 = sin(θ)

Finally, to find the angle θ, take the inverse sine (sin^(-1)) of both sides:

θ = sin^(-1)(0.55)

θ ≈ 33.6 degrees

So approximately 33.6 degrees is the angle between the wire and the magnetic field.

More on magnetic field: https://brainly.com/question/15567206

#SPJ11

If its mass is 500 kg and the acceleration due to gravity is 10 m/s^2, the weight of the elevator would be 5000 N (Newtons) .

To calculate the weight of the elevator, we can use the formula:

weight = mass * acceleration due to gravity

Given that the mass of the elevator is 500 kg and the acceleration due to gravity is 10 m/s^2, we can substitute these values into the formula and calculate the weight:

weight = 500 kg * 10 m/s^2

= 5000 N

Therefore, the weight of the elevator would be 5000 N (Newtons) if its mass is 500 kg and the acceleration due to gravity is 10 m/s^2.

To know more about acceleration due to gravity, here

brainly.com/question/13860566

#SPJ4

--The complete Question is, What would be the weight of the elevator if its mass is 500 kg, assuming that the acceleration due to gravity is 10 m/s^2? --

Answer:

using

V2= V1T2/T1

V2= 9.8L

The objective lens is a long focal length, convex lens and the eyepiece functions as a simple magnifier is the correct statement about a compound microscope. Option b is correct.

In a compound microscope, the objective lens is a long focal length, convex lens that produces an inverted, magnified real image of the specimen. The eyepiece, on the other hand, functions as a simple magnifier, which further magnifies the real image produced by the objective lens and forms a virtual image that can be viewed by the observer's eye. Therefore, option b is the correct statement.

To know more about microscope, here

brainly.com/question/18661784

#SPJ4

--The complete question is, A compound microscope is a two-lens system used to look at very small objects. Which of the following statements is correct?

a. The objective lens is a short focal length, convex lens and the eyepiece functions as a simple magnifier.

b. The objective lens is a long focal length, convex lens and the eyepiece functions as a simple magnifier.

c.  The objective lens and the eyepiece both have the same focal length and both serve as simple magnifiers.--

Answer:

1990.47 m/s

Explanation:

Answer: the answer is in the screen shots

Explanation:

The magnitude of the average angular acceleration of the fan is 2.24 rad/s2 . So the correct answer is option: b.

The average angular acceleration can be calculated using the formula:

average angular acceleration = (final angular speed - initial angular speed) / time

Plugging in the given values, we get:

average angular acceleration = (4.4 rad/s - 10 rad/s) / 2.50 s

average angular acceleration = -2.56 rad/s2

Note that the negative sign indicates that the angular acceleration is in the opposite direction to the initial angular velocity.

|average angular acceleration| = 2.56 rad/s2 ≈ 2.24 rad/s2 .

Therefore, the correct answer is (b).

To know more about magnitude, here

brainly.com/question/14452091

#SPJ4

To determine the focal length of a corrective lens required to make the far point distance infinite, we need to follow these steps:

1) Measure the person's far point distance: This can be done by having the person read letters on an eye chart or by using a refractometer.

Let's assume the person's far point distance is 3 meters.

2) Determine the person's current corrective lens prescription: If the person already wears corrective lenses, their current prescription can be used to calculate the required focal length of the corrective lens.

If they do not wear corrective lenses, this step can be skipped.

3) calculate the person's current refractive error: This can be done by subtracting the measured far point distance from infinity (1/∞) and converting the result to diopters.

For example, if the person's far point distance is 3 meters, their refractive error would be -0.33 diopters (1/3m = 0.33 D).

4) Determine the focal length of the corrective lens required to make the far point distance infinite: This can be done by adding the person's refractive error to the desired focal length of infinity (1/0 = 0 D).

For example, if the person's refractive error is -0.33 diopters, the required focal length of the corrective lens would be 0.33 meters or 33 centimeters.

Therefore, the person would need a corrective lens with a focal length of 33 centimeters to make their far point distance infinite.

To know more about focal length of a corrective lens :

https://brainly.com/question/13885819

#SPJ11

False. Staleness and burnout are often associated with overtraining, which occurs when an individual exceeds their capacity to recover from intense physical training or activity.

Overtraining can lead to physical and psychological symptoms, including decreased performance, fatigue, irritability, and decreased motivation. It is important for individuals to listen to their bodies and take rest and recovery periods to prevent overtraining and associated symptoms.

To know more about Overtraining, please click:

brainly.com/question/5430690

#SPJ11

The Chen notation of entity-relationship modelling can be used for both conceptual and implementation modelling.

The Chen notation of entity-relationship modelling can be used for both conceptual and implementation modelling. Notation refers to the symbols and conventions used to represent concepts in a model. Entity-relationship modelling is a technique used in database design to represent the relationships between entities. Conceptual modelling is the process of creating a high-level representation of a system, while implementation modelling involves creating a detailed representation of the system's implementation.

To learn more about Chen notation Here:

https://brainly.com/question/28234454

#SPJ11

The molecules in the Earth's atmosphere scatter blue wavelengths of light, making the sky appear blue during the day. The correct answer is a.

This phenomenon is known as Rayleigh scattering, which occurs when sunlight enters the Earth's atmosphere and interacts with the gas molecules in the air. The shorter, blue wavelengths of light are more easily scattered by the molecules in the atmosphere, while the longer, red wavelengths are less affected and continue to travel in a more direct path.

As a result, when we look up at the sky during the day, we see a blue color because the blue light is being scattered in all directions by the atmosphere. At sunrise and sunset, the sky appears more orange or red because the sun's light has to travel through more of the atmosphere, causing more scattering of the shorter, blue wavelengths and leaving more of the longer, red wavelengths to reach our eyes.

Learn more about  Earth's atmosphere

https://brainly.com/question/13154099

#SPJ4

The intensity level of the resulting sound is approximately 73 dB, the correct option is (e)

To calculate the intensity level of the resulting sound, we use the formula:

L = 10 log(I ÷ I0)

where L is the intensity level in decibels, I is the intensity of the sound wave in watts per square meter, and I0 is the reference intensity, which is equal to 1 x 10⁻¹² watts per square meter.

Since the motorcycles emit identical sound waves, the intensity of each wave is the same. We can calculate the intensity of a single motorcycle's sound wave using the formula:

I = [tex](10^{L/10} )[/tex] x I0

where L is the intensity level of the sound wave in decibels. Substituting L = 70 dB and I0 = 1 x 10⁻¹² watts per square meter, we get:

I = (10⁷) x 1 x 10⁻¹²

= 1 x 10⁻⁵ watts per square meter

To calculate the intensity level of the resulting sound, we use the formula:

L = 10 log(2I ÷ I0)

where 2I is the intensity of the sound waves produced by two identical motorcycles. Substituting I = 1 x 10⁻⁵ watts per square meter and I0 = 1 x 10⁻¹² watts per square meter, we get:

2I = 2 x 1 x 10⁻⁵

= 2 x 10⁻⁵ watts per square meter

L = 10 log(2 x 10⁻⁵ ÷ 1 x 10⁻¹²)

= 10 log(2 x 10⁷)

= 10 (7.301)

= 73.01 dB

Therefore, the correct option is (e)

To learn more about intensity follow the link:

https://brainly.com/question/17583145

#SPJ4

The complete question is:

A motorcycle passing by your apartment emits a sound with an intensity level of 70 dB. If two identical motorcycles passed by together, what would be the intensity level of the resulting sound?

a. 80 dB

b. 140 dB

c. 103 dB

d. 70 dB

e. 73 dB

The proton experiences an acceleration of [tex]$6.60\times10^{10} \text{m/s}^2$[/tex] in a uniform electric field of 691 N/C, and it takes [tex]$3.48\times10^{-5}$[/tex] s to reach a velocity of [tex]$2.30\times10^{6}$[/tex] m/s. During this time, the proton travels a distance of [tex]$4.36\times10^{-10}$[/tex] m and has a kinetic energy of [tex]$3.07\times10^{-12}$[/tex] J.

(a) The magnitude of the acceleration experienced by the proton can be determined by using the equation for the force on a charged particle in an electric field, which is F = qE, where F is the force, q is the charge of the particle, and E is the electric field strength. For a proton, the charge is equal to the fundamental charge, which is [tex]$1.602\times10^{-19} \text{C}$[/tex]. Therefore, the force on the proton is [tex]$F = (1.602\times10^{-19} \text{C})(691 \text{N/C}) = 1.106\times10^{-16} \text{N}$[/tex]

The acceleration of the proton can be determined using the equation F = ma, where m is the mass of the proton. Thus, [tex]$a = F/m = \dfrac{1.106\times10^{-16} \text{N}}{1.6726\times10^{-27} \text{kg}} = 6.60\times10^{10} \text{m/s}^2$[/tex].

(b) To find the time it takes for the proton to reach the given speed, we can use the kinematic equation v = u + at, where u is the initial velocity (which is 0 m/s), v is the final velocity ([tex]$2.30\times10^{6} \text{m/s}$[/tex]), a is the acceleration ([tex]$6.60\times10^{10} \text{m/s}^2$[/tex]), and t is the time. Rearranging this equation gives [tex]$t = \dfrac{v-u}{a} = \dfrac{2.30\times10^{6} \text{m/s}}{6.60\times10^{10} \text{m/s}^2} = 3.48\times10^{-5} \text{s}$[/tex].

(c) The distance the proton has moved in this time interval can be calculated using the kinematic equation [tex]$s = ut + \dfrac{1}{2}at^2$[/tex], where s is the distance traveled. Substituting the known values, we get [tex]$s = \dfrac{1}{2}(6.60\times10^{10} \text{m/s}^2)(3.48\times10^{-5} \text{s})^2 = 4.36\times10^{-10} \text{m}$[/tex]

(d) The kinetic energy of the proton can be calculated using the equation [tex]$KE = \dfrac{1}{2}mv^2$[/tex], where KE is the kinetic energy, m is the mass of the proton, and v is the velocity of the proton. Substituting the known values, we get [tex]$KE = \dfrac{1}{2}(1.6726\times10^{-27} \text{kg})(2.30\times10^{6} \text{m/s})^2 = 3.07\times10^{-12} \text{J}$[/tex].

To learn more about acceleration

https://brainly.com/question/12550364

#SPJ4