Answer:
Falling objects form an interesting class of motion problems. For example, we can estimate the depth of a vertical mine shaft by dropping a rock into it and listening for the rock to hit the bottom. By applying the kinematics developed so far to falling objects, we can examine some interesting situations and learn much about gravity in the process.
The most remarkable and unexpected fact about falling objects is that, if air resistance and friction are negligible, then in a given location all objects fall toward the center of Earth with the same constant acceleration, independent of their mass. This experimentally determined fact is unexpected because we are so accustomed to the effects of air resistance and friction that we expect light objects to fall slower than heavy ones.
A hammer and a feather will fall with the same constant acceleration if air resistance is considered negligible. This is a general characteristic of gravity not unique to Earth, as astronaut David R. Scott demonstrated on the Moon in 1971, where the acceleration due to gravity is only 1.67 m/s^2.
In the real world, air resistance can cause a lighter object to fall slower than a heavier object of the same size. A tennis ball will reach the ground after a hard baseball is dropped at the same time. (It might be difficult to observe the difference if the height is not large.) Air resistance opposes the motion of an object through the air, while friction between objects, such as between clothes and a laundry chute or between a stone and a pool into which it is dropped, also opposes motion between them. For the ideal situations of these first few chapters, an object falling without air resistance or friction is defined to be in free-fall.
Hope this helps, have a nice day/night! :D
Arthur (mass 79 kg) and Violet (mass 50 kg) are trying to play on a seesaw. If Violet sits 4 m from the fulcrum, at what distance from the fulcrum should Arthur sit
Hi there!
There are two torques acting on the system:
τ (Arthur) = RW = R(790N)
τ (Violet) = RW = 4(500N) = 2000N
∑τ = 0 = τ(Violet) - τ(Arthur)
Thus:
τ(Violet) = τ(Arthur)
2000 = 790R
R ≈ 2.53m
16g 2g/cm3 what is the Volume
Answer:
V = 1.25E-7 cubic meter
Is s=[tex]\frac{Ft^{2} }{2m}[/tex] a correct conversion from a=[tex]\frac{at^{2} }{2}[/tex]?
I just substituted "a" as [tex]\frac{F}{m}[/tex]
Answer:
well your substitution method is correct but make sure to double check the original formula
An electric heater is rated 300W 110V. The safety fuse in the circuit can withstand 15 A of current. How many heaters can be safely operated in the circuit
The number of heaters that can safely be operated in the circuit is 5 heaters.
From the question given above, the following data were obtained:
Power of heater = 300 W
Voltage (V) = 110 V
Current (I) = 15 A
Number of heaters = ?Next, we shall determine the power that can be drawn from the circuit. This can be obtained as follow:Voltage (V) = 110 V
Current (I) = 15 A
Power (P)= ?P = IV
P = 15 × 110
P = 1650 WThus, the power that can be drawn from the circuit is 1650 W
Finally, we shall determine the number of heaters that can be operated in the circuit. This can be obtained as follow:Power of heater = 300 W
Power of Circuit = 1650 W
Number of heaters = ?[tex]Number \: of \: heaters \: = \frac{power \: of \: circuit}{power \: of \: heater} \\ \\ = \frac{1650}{300} \\ \\ = 5.5[/tex]
From the calculation made above, the number of heaters that can be operated safely in the circuit is 5 heaters.
Learn more: https://brainly.com/question/14478862
As the distance between two objects changes, how does the gravitational force between them change?
Answer:
Explanation:
The gravitational force = G * m1 * m2 / r^2
That means as the distance increases, r get's bigger and m1 and m2 don't change, the force decreases. Read that sentence carefully. In physics, it is very important to know what goes up and goes down means and especially why.
The mass of the hammer is 0.454 kg. Calculate the weight of the hammer.
Explanation:
weight =0.454 × 9.8=4.4492N
Answer:
4.45 n sorry if I am wrong
SOMEONEEEE HELP ME PLEASE ILL MARK YOUR BRAINLIST !!!
This was kinda hard thinking it might be that the new force is going to 4 times bigger than the original one.
for hundreds of years scientists deny the existence of rogue waves until the presence of when was finally caught on record. when and where was the first time a rogue wave was measured?
Answer:
A rogue wave estimated at 18.3 meters (60 feet) in the Gulf Stream off of Charleston, South Carolina. At the time, surface winds were light at 15 knots.
Explanation:
Rogue, freak, or killer waves have been part of marine folklore for centuries, but have only been accepted as real by scientists over the past few decades.
Rogues, called 'extreme storm waves' by scientists, are those waves which are greater than twice the size of surrounding waves, are very unpredictable, and often come unexpectedly from directions other than prevailing wind and waves.
Most reports of extreme storm waves say they look like "walls of water." They are often steep-sided with unusually deep troughs.
Since these waves are uncommon, measurements and analysis of this phenomenon is extremely rare. Exactly how and when rogue waves form is still under investigation, but there are several known causes:
Constructive interference. Extreme waves often form because swells, while traveling across the ocean, do so at different speeds and directions. As these swells pass through one another, their crests, troughs, and lengths sometimes coincide and reinforce each other. This process can form unusually large, towering waves that quickly disappear. If the swells are travelling in the same direction, these mountainous waves may last for several minutes before subsiding.
Focusing of wave energy. When waves formed by a storm develop in a water current against the normal wave direction, an interaction can take place which results in a shortening of the wave frequency. This can cause the waves to dynamically join together, forming very big 'rogue' waves. The currents where these are sometimes seen are the Gulf Stream and Agulhas current. Extreme waves developed in this fashion tend to be longer lived.
Hope this helps, have a nice day/night! :D
On January 1st, 1995, the first accurate measurement of a rogue wave took place. It was captured by a laser detector on Statoil's Draupner oil drilling rig, which is situated 100 miles off the Norwegian coast.
What is rogue wave?
Although rogue, freak, or killer waves have been mentioned in maritime legend for many years, scientists have only recently acknowledged their existence.
Scientists refer to these waves as "rogues," or "severe storm waves," since they are more than twice as large as the waves around them, very unpredictable, and frequently arrive from directions other than the prevailing wind and waves.
Extreme storm waves are typically described as looking like "walls of water" in reports. Frequently, they have steep sides and exceptionally deep valleys.
Measurements and analyses of this phenomenon are extremely rare because these waves are not common.
Learn more about rogue waves, refer the link:
https://brainly.com/question/14097449
#SPJ2
You use a rope 2.00 m long to swing a 10 kg weight around your head. The tension in the rope is 20 N. In half a revolution how much work in J is done by the rope on the weight
Answer:
No work is done on the weight. :3
To solve this we must be knowing each and every concept related to work and its calculation. Therefore, 250J is the work done in joule by the rope on the weight.
What is work?Work in physics is the energy delivered to or out of an item by applying force across a displacement. It is frequently expressed in its most basic form as the combination of displacement and force.
When a force is applied, it is said to produce positive work if it has a proportion in the orientation of the movement of a site of application. Work done is positive when the direction of force acting on the object and displacement of the object both are in the same direction.
Mathematically,
Work= force ×displacement
force =20 N
displacement=2.00 m
displacement=2×3.14×2=12.5m
substituting all the given values in the above equation, we get
Work= 20 ×12.5
Work =250J
Therefore, 250J is the work done in joule by the rope on the weight.
To learn more about work, here:
https://brainly.com/question/18094932
#SPJ5
What is a lever?....
Answer:
A lever is a simple machine in the subject "S.T.E.M"
Explanation:
Levers use the following forces in order to be used: push or pull.
examples are crow bars,shovels, brooms and ect.
You have a particle of length 68 nm. What is this in meters?
A. 6.8 x 10^10 m
B. 6.8 x 10^14 m
C. 6.8 x 10^-11 m
D. 6.8 x 10^-8 m
The number after "^" that symbol are exponents
I would like to know if it would be m/s² or just m/s and explain why. thanks
It will be
[tex] {m/s}^{2} [/tex]
I am just explaining with the units only, because you want to know the accurate unit.
[tex] \frac{m/s}{s} \\ = \frac{m}{s} \times \frac{1}{s} \\ = \frac{m}{s \times s} \\ = \frac{m}{ {s}^{2} } \\ = {m/s}^{2} [/tex]
Hope you understood.
Do comment if you have any query.
Which of the following are for vector directione?
A Outside 45 degrees
G 35 degrees north of east
D 35 degrees inside
What net force would be necessary to cause a block of wood with a mass of 2.5 kg to accelerate at a rate of 3.0 m/s2
Answer:
7.5 NExplanation:
The force acting on an object given it's mass and acceleration can be found by using the formula
force = mass × acceleration
From the question
mass = 2.5 kg
acceleration = 3.0 m/s²
We have
force = 2.5 × 3.0 = 7.5
We have the final answer as
7.5 NHope this helps you
2. What is the period of 350 waves passing a point in 5 seconds?
Answer:
IF SHE BREATHS SHES A T.H.OT
Explanation:
Pls dont hate me its meme k ,_.
Which ONE of the following pairs of physical quantities consists of one scalar and one vector quantity?
A. Distance and speed
B.Speed and acceleration C.Displacement and velocity
D. Velocity and acceleration.
Answer:
speed and acceleration
Explanation:
speed is a scalar quantity
acceleration is a vector quantity
atom a has an atomic number of 40 atom b has an atomic number of 20 and a mass of 40 which of these is an accurate statement
Answer:14
Explanation:cuz
To measure the current through and the voltage across a resistor in a circuit, you should place the ammeter in _____ with the resistor and the voltmeter in _____ with the resistor.
Answer:
ammeter: seriesvoltmeter: parallelExplanation:
The current is the same through components connected in series. If you want to measure the current in a component, the ammeter must be placed in series.
__
The voltage is the same at the terminals of components connected in parallel. If you want to measure the voltage across a component, the voltmeter must be connected across the component, that is, in parallel with it.
[tex]\huge \mathbb \pink{ANSWER:}[/tex]
To measure the current through and the voltage across a resistor in a circuit, you should place the ammeter in series with the resistor and the voltmeter in parallel with the resistor.
#CarryOnLearning
I=24
Q=400C
t=102
Help please
[tex] \huge \bf༆ Answer ༄[/tex]
The given terms in the question are : -
I = Electric current = 2 AmperesQ = Charge = 400 CoulombsWe have been given the task to find out time (t)
The formula that can be used to find time is : -
[tex] \sf \: I = \dfrac{ Q}{t}{} [/tex]
Rearrange the formula,
[tex] \sf \: t = \dfrac { Q}{I }[/tex]
Solve for time (t)
[tex] \sf t = \dfrac{400}{2} [/tex][tex] \sf t = 200 \: \: sec[/tex][tex]꧁ \: \large \frak{Eternal \: Being } \: ꧂[/tex]
what are the three different ways to tell the difference between a solar and lunar eclipse?
Answer:
Solar eclipses occur when the Moon passes between Earth and the Sun, leaving a moving region of shadow on Earth's surface. Lunar eclipses occur when Earth passes between the Sun and the Moon, casting a shadow on the Moon. This is an annular eclipse.
(credits to "britannica")
Explanation:
Fill in the blank: In the Northern Hemisphere, June 21 has ______________ than December 21.
A. longer days and more direct sunlight
B. longer days and less direct sunlight
C. shorter days and more direct sunlight
D. shorter days and less direct sunlight
Answer:
A. longer days and more direst sunlight
Explanation:
In the Northern Hemisphere, June 21 has longer days and more direct sunlight than December 21, so option A is correct.
What is Hemisphere?Essentially, it alludes to a person's half-divisions. The Earth can be split up into many equal divisions. Latitudinal or longitudinal divisions may be used. Based on a hypothetical equator line, it can be either the northern or Southern Hemisphere, and based on the prime meridian, it can be either the eastern or western hemisphere. When viewed from a latitudinal perspective, the Northern and Southern Hemispheres are essentially hemispheres of the Earth.
The Northern Hemisphere is the region of the Earth that lies above the equator, which is an imaginary line. This hemisphere includes anything that is above this 0° line. It is the half of the planet that has the most people on the planet and more land than water.
The summer solstice falls on June 21 in the Northern Hemisphere and the winter solstice falls on June 21 in the Southern Hemisphere. The solstices are reversed around December 21 and winter officially starts in the Northern Hemisphere.
Therefore, in the Northern Hemisphere, June 21 has longer days and more direct sunlight than December 21.
To know more about hemispheres:
https://brainly.com/question/26841745
#SPJ2
A system releases 622 kJ of heat and does 105 kJ of work on the surroundings. What is the change in internal energy of the system
Answer:
Δ-727 or -7.27x10²kJ
Explanation:
ΔV=q-w
(q)= -622
(w)= -105
(both negative because it indicate loss of energy)
ΔV= -622+(-105)
ΔV= -727 kJ
The change in internal energy of the system when it released a heat of 622 kJ and does a work of 105 kJ on the surroundings is -727 kJ.
What is change in internal energy?Internal energy is all the energy contained in an object.
To calculate the change in internal energy of the system, we use the formula below.
Formula:
ΔU = Q-W............. Equation 1Where:
ΔU = Change in internal energy of the system,W = work done by the systemQ = Heat released by the system.From the question,
Given:
Q = - 622 kJ ( released of heat)W = 105 kJ.Substitute these values into equation 1
ΔU = -622-105ΔU = -727 kJHence, the change in internal energy of the system when it released a heat of 622 kJ and does a work of 105 kJ on the surroundings is -727 kJ.
Learn more about internal energy here: https://brainly.com/question/25737117
A car accelerates from rest to a speed of v. Later, on a highway it accelerates from v to 2v. Which takes more energy, going from 0 to v, or from v to 2v?
Answer:
I believe 0 to V sorry if im wrong
Explanation:
if the amplitude of a sound wave is tripled, the intensity will:
Answer:
Increase 9 times
Explanation:
A ball is dropped from a 20.0 m high tower.
a. How long will it take the ball to reach the ground?
b. What is the velocity of the ball just before it hits the ground?
Hi there!
We can begin by using the derived kinematic equation:
[tex]t = \sqrt{\frac{2h}{g}[/tex]
Plug in the given values and let g = 9.8 m/s²:
[tex]t = \sqrt{\frac{2(20)}{g}} = \boxed{2.02 s}[/tex]
Now, we can solve for its final velocity using the equation:
[tex]v_f = v_i + at[/tex]
It is dropped from rest, so vi = 0 m/s.
[tex]v_f = at[/tex]
[tex]v_f = 9.8(2.02) = \boxed{19.796 m/s}[/tex]
Answer:
a. The ball would reach the ground in approximately [tex]2.02\; \rm s[/tex].
b. The velocity of the ball right before landing would be approximately [tex]19.8\; \rm m\cdot s^{-1}[/tex].
(Assumptions: the ball was dropped with no initial velocity; air resistance on the ball is negligible; [tex]g = 9.81\; \rm m\cdot s^{-2}[/tex].)
Explanation:
Under these assumptions, the acceleration of this ball would be constantly [tex]a = g = 9.81\; \rm m\cdot s^{-2}[/tex] (same as the gravitational field strength) during the descent.
Displacement of the ball: [tex]x = 20.0\; \rm m[/tex].
Initial velocity of the ball: [tex]v_{0} = 0\; \rm m\cdot s^{-1}[/tex].
Let [tex]t[/tex] denote the duration of this descent.
The SUVAT equation [tex]x = (1/2)\, a\, t^{2} + v_{0}\, t[/tex] relates the known quantities [tex]a[/tex], [tex]x[/tex], and [tex]v_{0}[/tex] to the unknown [tex]t[/tex].
Substitute the known quantities into this equation and solve to find the value of [tex]t\![/tex]:
[tex]\displaystyle 20.0\; {\rm m} = \frac{1}{2}\times 9.81\; {\rm m\cdot s^{-2}} \times t^{2} + 0\; {\rm m \cdot s^{-1}} \times t[/tex].
[tex]\displaystyle 20.0\; {\rm m} = \frac{1}{2}\times 9.81\; {\rm m\cdot s^{-2}} \times t^{2}[/tex].
[tex]\displaystyle t^{2} = \frac{20.0\; \rm m}{(1/2) \times 9.81\; \rm m\cdot s^{-2}}[/tex].
Since [tex]t > 0[/tex]:
[tex]\begin{aligned}t &= \sqrt{\frac{20.0\; \rm m}{(1/2) \times 9.81\; \rm m\cdot s^{-2}}} \\ &\approx 2.01928\; \rm s\\ &\approx 2.02\; \rm s \\ & (\text{Rounded to 2 sig. fig.})\end{aligned}[/tex].
Since the acceleration of this ball is constant, the velocity of the ball right before landing would be:
[tex]\begin{aligned}v_{1} &= a\, t \\ &\approx 9.81\; \rm m\cdot s^{-2} \times 2.01928\; \rm s \\ &\approx 19.8\; \rm m \cdot s^{-1} \end{aligned}[/tex].
ignore this i put the wrong grade sorry
Answer:
Oh its fine i am not in college but its still fine
Explanation:
is the amplitude just 2? Or do I combine all of them and do 6?
Answer:
combine them all
6 m
Explanation:
What role does physical health play into nutrition?
The time (t) required to empty a tank varies inversely as the rate (r) of pumping. If a
pump can empty a tank in 3 hours at a rate of 400 gallons per minute, how long will it
take to empty a tank at 600 gallons per minute?
Answer:
T = C / R t = time, C =constant of proportionality, R = rate
180 min = C / 400 gal/min
C = 72000 gal to empty tank
T = 72000 gal / 600 gal/min = 120 min = 2 hrs
What energy is used or given off by a fire?
Answer:
Heat is given off by Fire.
Explanation: