Thermal expansion is a phenomenon in which materials expand when they are heated and contract when they are cooled. This can be a problem in industrial equipment or piping systems that contain liquids, especially when the liquid is blocked-in and cannot move freely.
When the temperature of the liquid increases due to an external heat source, such as a nearby furnace or the sun, the liquid will expand and cause an increase in pressure within the equipment or piping system. This increase in pressure can lead to overpressure, which can be dangerous and can potentially cause equipment failure or system rupture.
It is important to account for thermal expansion when designing industrial equipment and piping systems to ensure that they can safely withstand the changes in pressure caused by temperature fluctuations.
Learn more about equipment ,
https://brainly.com/question/30230359
#SPJ4
a circuit breaker is rated for a current of 15 a rms at a voltage of 240 v rms. (a) what is the largest value of imax that the breaker can carry?
The largest value of I_max that the breaker can carry is approximately 21.21 A.
Given a circuit breaker rated for 15 A RMS at 240 V RMS, we want to find the largest value of Imax (maximum current) that the breaker can carry. To do this, we'll use the following formula:
I_max = √2 * I_RMS
Where I_RMS is the rated current in RMS, which is 15 A in this case.
Substitute the value of I_RMS into the formula:
Imax = √2 * 15 A
Calculate the value of Imax:
Imax ≈ 21.21 A
Therefore approximately 21.21 A is the largest value of Imax that the breaker can carry.
More on circuit breaker: https://brainly.com/question/29480920
#SPJ11
A loose spiral spring carrying no current is hung from a ceiling. When a switch is thrown so that a current exists in the spring, do the coils move closer together move farther apart not move at all
The coils in the spring will move farther apart when a current is passed through it because of the solenoid effect.
The solenoid effect describes the way a loose spiral spring expands when a current is fed through it. An electric current flows through a coil of wire to create a solenoid, a type of electromagnet. A magnetic field is produced when current passes through the coil, and the magnetic field lines are parallel to the axis of the coil. The amount of current flowing through the coil and the number of wire turns within the coil determines how strong the magnetic field is.
Because a loose spiral spring behaves like a coil of wire, the solenoid effect is seen in this situation. The magnetic field that is created around a spring when a current is sent through it has lines that are parallel to the spring's axis. The interaction between the magnetic field and the spring's current produces a force that pushes the coils apart.
To learn more about solenoids, refer to:
https://brainly.com/question/4340558
#SPJ4
if hydrogen is the most common element in the universe, why do we not see the lines of hydrogen in the spectra of the hottest stars?
The reason we do not see the lines of hydrogen in the spectra of the hottest stars is due to the ionization of hydrogen atoms at high temperatures.
In these stars, the temperatures are so high that the electrons in the hydrogen atoms are stripped away, leaving behind only the protons. This ionized hydrogen does not produce the same spectral lines as neutral hydrogen, which is what we typically observe in cooler stars. Instead, the spectra of hot stars are dominated by lines from ionized metals, such as helium, carbon, and oxygen. So while hydrogen is indeed the most common element in the universe, its presence in the spectra of hot stars is not as prominent due to ionization.
More on hydrogen: https://brainly.com/question/30077093
#SPJ11
ten 7.0-w christmas tree lights are connected in series to each other and to a 120-v source. what is the resistance of each bulb?
The resistance of each bulb which are connected in series is 20.571 Ω.
Let's find the resistance of each bulb using the given terms:
1. Voltage of source (V_source) = 120 V
2. Number of bulbs (n) = 10
3. Power of each bulb (P) = 7.0 W
We'll use the formula P = V²/R to find the resistance of each bulb.
1: Find the total power of the series.
Total power (P_total) = n * P = 10 * 7.0 W = 70 W
2: Find the total resistance of the series.
Using the formula P_total = V_source^2 / R_total, we can find R_total:
R_total = V_source² / P_total = (120 V)² / 70 W = 14400 / 70 = 205.71 Ω
3: Find the resistance of each bulb.
Since the bulbs are connected in series, the total resistance is the sum of the individual resistances. Therefore, we can find the resistance of each bulb (R_bulb) as follows:
R_bulb = R_total / n = 205.71 Ω / 10 = 20.571 Ω
So, the resistance of each bulb is approximately 20.571 Ω.
Learn more about resistance:
https://brainly.com/question/24858512
#SPJ11
in this simplified version of the sgd update there is a clear relationship between momentum and the batch size . what is that relation? specifically, let's assume we train a model with momentum and a batch size . how should we change the momentum if we now have a gpu with more memory and can use a batch size of ? specify the momentum that would lead to equivalent gradient updated in the simplified sgd update equation above. round to two decimal digits (e.g. 0.12).
The equivalent gradient updates as momentum 0.9 with batch size B = 32 in the simplified SGD update equation.
What is the relation?The relationship between momentum and batch size in the simplified version of SGD update is that increasing the batch size leads to a decrease in the effective learning rate, which in turn requires an increase in momentum to maintain the same level of stability.
If we train a model with momentum and a batch size of B, and now have a GPU with more memory and can use a batch size of B', we should increase the momentum by a factor of sqrt(B/B') to maintain the same level of stability.
To find the equivalent momentum for the simplified SGD update equation, we can use the formula:
momentum' = momentum * sqrt(B/B')
For example, if we initially trained with momentum = 0.9 and batch size B = 32, and now have a GPU with enough memory to use batch size B' = 64, we would calculate:
momentum' = 0.9 * sqrt(32/64) = 0.9 * 0.7071 = 0.64 (rounded to two decimal digits)
Therefore, using a momentum of 0.64 with batch size B' = 64 would lead to equivalent gradient updates as momentum 0.9 with batch size B = 32 in the simplified SGD update equation.
Learn more about SGD
brainly.com/question/30244812
#SPJ11
at 2.1 km from the transmitter, the peak electric field of a radio wave is 350 mv/m . what is the peak electric field 10 km from the transmitter?
The peak electric field 10 km from the transmitter is approximately 15.435 mV/m.
To find the peak electric field 10 km from the transmitter, we can use the inverse square law.
This law states that the intensity of a wave (such as the electric field in this case) is inversely proportional to the square of the distance from the source.
Here's a step-by-step explanation:
1. Note the initial distance (d1) and electric field (E1):
d1 = 2.1 km, E1 = 350 mV/m.
2. Convert d1 to meters:
d1 = 2100 m.
3. Note the final distance (d2):
d2 = 10 km.
4. Convert d2 to meters:
d2 = 10,000 m.
5. Use the inverse square law formula:
E2 = E1 * (d1²) / (d2²).
6. Plug in the values:
E2 = 350 * (2100²) / (10,000²).
7. Calculate E2:
E2 ≈ 15.435 mV/m.
Learn more about electric field:
https://brainly.com/question/14372859
#SPJ11
A planet has mass M = 8.00 × 1023 kg. At what distance will the centripetal acceleration of an orbiting space station be equal to the gravitational acceleration on Earth’s surface? (G = 6.67 × 10–11 m3·kg–1·s–1)answer is 2.33 x10^6 m. Can someone show the work on how to get this answer?
To find the distance at which the centripetal acceleration of an orbiting space station around a planet is equal to Earth's gravitational acceleration, we need to set up an equation involving the planet's mass (M), gravitational constant (G), and Earth's gravitational acceleration (g).
Given:
M = 8.00 × 10²³ kg
G = 6.67 × 10^(-11) m³·kg^(-1)·s^(-1)
g = 9.81 m/s² (Earth's gravitational acceleration)
Centripetal acceleration (a_c) is given by the formula:
a_c = (G * M) / r²
where r is the distance from the planet's center.
We want the centripetal acceleration to be equal to Earth's gravitational acceleration, so we can set them equal:
g = (G * M) / r²
Now, we need to solve for r:
r² = (G * M) / g
r² = (6.67 × 10^(-11) m³·kg^(-1)·s^(-1) * 8.00 × 10²³ kg) / 9.81 m/s²
r² ≈ 5.42 × 10¹² m²
Now, take the square root of both sides to find r:
r ≈ 2.33 × 10^6 m
So, at a distance of 2.33 x 10^6 meters from the planet's center, the centripetal acceleration of an orbiting space station will be equal to the gravitational acceleration on Earth's surface.
To learn more about Centripetal Acceleration and Gravitational Acceleration. Please Visit:
https://brainly.com/question/26143683
#SPJ11
The following formula can be used to determine the distance from the planet's centre at which the centripetal acceleration of an orbiting space station equals the gravitational acceleration on Earth's surface:
[tex]r = (GM/g)^(1/3)[/tex]
where the gravitational constant, G, equals 6.67 1011 m3 kg-1 s-1.
M is equal to 8.00 1023 kg (the planet's mass).
Gravitational acceleration on Earth's surface is equal to 9.81 m/s2.
When we change the values, we obtain:
[tex]r = [(6.67 × 10^-11) × (8.00 × 10^23) / 9.81]^(1/3)[/tex]
[tex]r = 2.33 × 10^6 m[/tex]
Therefore, 2.33 x 106 m is the necessary distance.
F = G (m1m2 / r2), where G is the gravitational constant, m1 and m2 are the masses of the two objects, and r is the distance between them, can be used to express the gravitational force between two objects. When a planet and a satellite are involved, the centripetal force that holds the satellite in orbit around the planet is produced by the gravitational force. As a result, we may compare the centripetal force to gravity and find r. This results in the formula above, which we can use to calculate the necessary distance.
learn more about gravitational acceleration here:
https://brainly.com/question/30429836
#SPJ11
10. A roller coaster accelerates at 8.75 m/s² from rest to a final velocity of 70 m/s. How long does it
take to speed up?
A roller coaster accelerates at 8.75 m/s² from rest to a final velocity of 70 m/s it takes 8 sec to speed up.
How to calculate time?Using the equation v = u + at, we can find:70 m/s for final velocityThe roller coaster starts at rest, therefore u = starting velocity = 0 m/s.8.75 m/s2 for acceleration and time, respectivelyWhen we solve for t, we obtain:t = (v - u) / at = (70 m/s - 0 m/s) / 8.75 m/s2 t = 8 sec.In light of this, the roller coaster's acceleration takes 8 seconds.The rate of change in an object's velocity with respect to time is known as acceleration in mechanics. The vector quantity of accelerations. The direction of the net force that is acting on an object determines its acceleration.For more information on time of roller coaster kindly visit to
https://brainly.com/question/18002471
#SPJ1
5. Explain the law of conservation of energy using a relevant example from every day life.
The law of conservation of energy states that energy is neither created nor destroyed but is transformed from one form to another.
What is law of conservation of energy?The law of conservation of energy is the law that states that energy is neither created nor destroyed but is transformed from one form to another.
Examples of activities of everyday life that shows the conservation of energy include the following:
For loudspeaker, electrical energy is converted into sound energy.For a microphone, sound energy is converted into electrical energy.For a generator, mechanical energy is converted into electrical energy.When fuels are burnt, chemical energy is converted into heat and light energyLearn more about energy here:
https://brainly.com/question/25959744
#SPJ1
An example of the law of conservation of energy is a roller coaster.
What is the law of conservation of energy?The law of conservation of energy states that energy cannot be created or destroyed, only transferred or transformed from one form to another. This means that the total amount of energy in a closed system remains constant over time.
A roller coaster car gains kinetic energy as it moves down the track, but it also loses potential energy. At the bottom of the track, the car has the most kinetic energy and the least potential energy, while at the top of the track, it has the most potential energy and the least kinetic energy. However, the total amount of energy in the system remains constant.
Learn about law of conservation of energy here https://brainly.com/question/166559
#SPJ1
a pendulum is swinging upward and is halfway toward its highest position, as shown, when the string breaks. which of the paths shown best represents the one that the ball would take after the string breaks?
The option A is best representation of the path that the ball would take after the string breaks.
When the string of a pendulum breaks, the ball's path will follow the laws of motion, specifically the law of conservation of energy. As the ball was halfway to its highest position, it had a certain amount of potential energy.
When the string broke, this potential energy would convert to kinetic energy, causing the ball to move in a straight line tangent to the point where the string broke.
Therefore, the path that the ball would take after the string breaks would be a straight line away from the pivot point of the pendulum, as shown in option A. The other paths shown do not follow the laws of motion and do not account for the conservation of energy. Option (A) is the correct answer.
To learn more about : string
https://brainly.com/question/24994188
#SPJ11
Note the full question is
A pendulum is swinging upward and is halfway toward its highest position, as shown, when the string breaks. which of the paths shown best represents the one that the ball would take after the string breaks?
A) A
B) B
C) C
D) D
E) E
as per subpart b, a physician who is a member of the research team on a study involving nonviable neonates may assist the treating physicians in determining whether neonates are nonviable. True or false?
True a significant factor in algal blooms and the excessive growth of aquatic vegetation that results in competition for sunlight and congestion.
What exactly is a contest?Job competition is fierce. Computer firms compete fiercely with one another. The two businesses are in opposition to one another.It can also be described more broadly as the either direct or indirect relationship between species that affects fitness when they share a resource.When there is monopolistic competition, several vendors offer differentiated goods—goods with minor differences but similar functions.
An organism is what?Therefore, every animal, plant, mould, protist, organism, or archaeon found on Earth would be considered an organism. There are numerous methods to categorise these species.a single organism that uses its organs to carry out its life's functions
To know more about organism visit:
https://brainly.com/question/13278945
#SPJ1
A client reports general malaise and has a temperature is 103.8°F (39.9°C). What is the rationale for administering a prescribed aspirin, an antipyretic, to this client?
Antipyretics protect vulnerable organs, such as the brain, from extreme temperature elevation.
Temperatures in excess of 99.5°F (37.5°C) can result in seizure activity.
Lower temperatures inhibit the protein synthesis of bacteria.
Most antipyretics have been shown to have little effect on core temperature but alleviate discomforts.
A client reports general malaise and has a temperature is 103.8°F (39.9°C). What is the rationale for administering a prescribed aspirin, an antipyretic, to this client
step-by-step explanation:
Step 1: A client reports general malaise and has a temperature of 103.8°F (39.9°C).
Step 2: The high temperature is an indication that the body is fighting an infection or inflammation.
Step 3: Antipyretics, such as aspirin, work by blocking the production of certain chemicals in the body that cause fever.
Step 4: Lowering the body temperature can help alleviate the discomfort associated with fever and reduce the risk of complications, such as seizures or dehydration.
Step 5: Aspirin is a commonly prescribed antipyretic that can be effective in reducing fever.
Step 6: The rationale for administering a prescribed aspirin, an antipyretic, to this client is to lower the body temperature and alleviate the discomfort associated with fever.
Step 7: It is important to follow the prescribed dosage and instructions for aspirin to avoid potential side effects or interactions with other medications.
Step 8: If the fever persists or worsens, it is important to seek medical attention to determine the underlying cause and ensure appropriate treatment.
To know more about Antipyretics :
https://brainly.com/question/30758739
#SPJ11
A mechanic exerts a force of 55 N on a 0.015 m2 hydraulic piston to lift a small automobile. The piston the automobile sits on has an area of 2.4 m2. What is the weight of the automobile?
The force needed to lift the car is 8800 N, which is its weight.
What kind of forces do hydraulic systems produce?In hydraulic systems, forces are transferred from one area to another inside an incompressible fluid, such as water or oil. Most aircraft's landing gear and braking systems are hydraulic. In order to function, pneumatic systems need a compressible fluid like air.
The smaller piston received a 55 N force from the mechanic, and its surface area was 0.015 m². We may determine the pressure used by the mechanic using the pressure formula P = F/A:
P = F/A = 55 N / 0.015 m² = 3666.67 Pa
This pressure is transmitted to the larger piston with an area of 2.4 m². The force on the larger piston can be calculated using the formula F = PA:
F = PA = 3666.67 Pa x 2.4 m² = 8800 N
To know more about force visit:-
https://brainly.com/question/13191643
#SPJ1
help me please oml 2 one
Color: Both the bromine gas and steak have a brownish color.
What is bromine gas?Bromine gas is a reddish-brown, nonflammable, and highly toxic gas with a very strong, unpleasant odor. It is composed of two heavy, diatomic, halogen molecules, Br2, and is the only nonmetal element that exists as a liquid at room temperature. Bromine gas is denser than air and is soluble in water and organic solvents.
Texture: The bromine gas is a gas and therefore has no texture, while the steak is solid and has a firm texture.
Temperature: The bromine gas is a gas and therefore has a lower temperature than the steak, which is at room temperature.
Bromine Gas and Juice:
Color: The bromine gas is brownish and the juice is a yellowish or orange color.
Texture: The bromine gas is a gas and therefore has no texture, while the juice is a liquid and has a smooth texture.
Temperature: The bromine gas is a gas and therefore has a lower temperature than the juice, which is at room temperature.
To learn more about bromine gas
https://brainly.com/question/1126306
#SPJ1
at what velocity (in revolutions per minute) will the peak voltage of a generator be 475 v, if its 475 turn, 8.00 cm diameter coil rotates in a 0.250 t field?
The velocity at which the peak voltage of the generator is 475 V is 95.0 revolutions per minute.
The peak voltage (V) of a generator is given by the equation V = NBAω, where N is the number of turns in the coil, B is the magnetic field strength, A is the area of the coil, and ω is the angular velocity of the coil.
We are given that the coil has 475 turns, a diameter of 8.00 cm, and rotates in a 0.250 T field. We can use these values to find the area of the coil:
radius = diameter/2 = 4.00 cm
[tex]area = π(radius)^2 = 50.27 cm^2[/tex]
Now we can solve for ω:
V = NBAω
[tex]ω = V/(NBA) = (475 V)/(475 turns)(0.250 T)(50.27 cm^2)(1 m^2/10,000 cm^2)(1 rev/2π radians)[/tex]
ω = 95.0 rev/min
Therefore, the velocity at which the peak voltage of the generator is 475 V is 95.0 revolutions per minute.
Learn more about The velocity
https://brainly.com/question/17127206
#SPJ4
1260 RPM. RPM = (Peak Voltage / (2 * pi * coil diameter * magnetic field strength)) * 60 can be used to compute this.
The formula Vp = NABw/2, where N is the number of turns in the coil, A is the coil's area, B is the strength of the magnetic field, and w is the coil's angular velocity, determines the peak voltage produced by a revolving coil. We arrive at w = 2Vp/(NAB) after solving for w. Since the coil diameter rather than the area is provided, we can apply the calculation A = pi*d2/4 to determine the area. After simplifying and substituting the given variables, we get at w = 2 * 475 / (475 * pi * 0.082 * 0.25) = 420 rad/s. Finally, we increase this by 60 / (2 * pi), which gives us 1260 RPM.
learn more about coil here:
https://brainly.com/question/27961451
#SPJ11
A mass of 25. 0 kg is acted upon by two forces: is 15. 0 n due east and is 10. 0 n and due north. The acceleration of the mass is
the acceleration of the mass is 0.7212 m/s^2.
To find the acceleration of the mass, we need to first determine the net force acting on it. We can do this by using vector addition to add the two forces together.
Using the Pythagorean theorem, we can find the magnitude of the diagonal force:
sqrt[[tex](15N)^{2}[/tex] + [tex](10N)^{2}[/tex]] = sqrt[225 + 100] = sqrt(325) = 18.03 N
The direction of this force can be found using the inverse tangent function:
theta =[tex]tan^{-1}(10.0N/15.0N)[/tex] = 33.69 degrees north of east
We can now use vector addition to find the net force on the mass:
F_net = sqrt[[tex](15N)^{2}[/tex] + [tex](10N)^{2}[/tex]] = 18.03 N, at an angle of 33.69 degrees north of east
To find the acceleration of the mass, we can use Newton's second law, which states that the net force acting on an object is equal to its mass times its acceleration:
F_net = ma
Solving for the acceleration, we get:
a = F_net / m = 18.03 N / 25.0 kg = 0.7212 m/s^2
Therefore, the acceleration of the mass is 0.7212 m/s^2.
Learn more about Vector Addition:
https://brainly.com/question/19420810
in an rc circuit what teh range of c needed for the capacitor to be 99.3% charged within 10 ms of turning the voltage source on ?
The range of capacitance needed for the capacitor to be 99.3% charged within 10 ms of turning the voltage source on is greater than or equal to 56.3 times the resistance in ohms.
To calculate the range of capacitance needed for the capacitor to be 99.3% charged within 10 ms of turning the voltage source on in an RC circuit, we can use the following formula:
Vc(t) = Vmax * (1 - e^(-t/RC))
where Vc(t) is the voltage across the capacitor at time t, Vmax is the maximum voltage of the source, e is the mathematical constant approximately equal to 2.718, R is the resistance in ohms, C is the capacitance in farads, and t is the time in seconds.
When the capacitor is 99.3% charged, the voltage across it is 0.993 * Vmax. Substituting this value into the formula and solving for C, we get:
C >= t / (R * ln(1 / (1 - 0.993)))
C >= 10 ms / (R * ln(1 / 0.007))
C >= 56.3 * R
Therefore, the range of capacitance needed for the capacitor to be 99.3% charged within 10 ms of turning the voltage source on is greater than or equal to 56.3 times the resistance in ohms.
Know more about RC circuit here:
https://brainly.com/question/2741777
#SPJ11
what does the technique of interferometry allow?what does the technique of interferometry allow?it allows two or more telescopes to obtain a total light-collecting area much larger than the total light-collecting area of the individual telescopes.it allows us to determine the chemical composition of stars.it allows two or more telescopes to obtain the angular resolution of a single telescope much larger than any of the individual telescopes.it allows the same telescope to make images with both radio waves and visible light.it allows astronomers to make astronomical observations without interference from light pollution.
The technique of interferometry allows two or more telescopes to obtain the angular resolution of a single telescope much larger than any of the individual telescopes.
This is achieved by combining the signals received by the telescopes to create a single image with a higher resolution. Interferometry is especially useful for studying objects with small angular sizes, such as stars and planets.
Additionally, interferometry allows astronomers to make astronomical observations without interference from light pollution, as it can separate the signals from the object being observed from the background light.
However, interferometry does not directly determine the chemical composition of stars, although it can provide information about their temperature and other physical properties.
Learn more about interferometry:
https://brainly.com/question/30054443
#SPJ11
when does a star become a main-sequence star? when the rate of hydrogen fusion within the star's core is high enough to maintain gravitational equilibrium when hydrogen fusion is occurring throughout a star's interior when the protostar assembles from a molecular cloud when a star becomes luminous enough to emit thermal radiation the instant when hydrogen fusion first begins in the star's core
Answer: hope it helps
Explanation:
A protostar becomes a main sequence star when its core temperature exceeds 10 million K. This is the temperature needed for hydrogen fusion to operate efficiently.
a ? is a wheel with a concave edge for supporting a moving rope that is changing direction.
is a wheel with a concave edge for supporting a moving rope that is changing direction.
A sheave is a wheel with a concave edge for supporting a moving rope that is changing direction. A sheave helps to reduce friction and increase efficiency when managing ropes in various applications.
The term you are looking for is "pulley". A pulley is a simple machine that consists of a wheel with a grooved rim or concave edge, which is designed to support a moving rope or cable and change its direction of motion. Pulleys are commonly used in various applications, such as lifting heavy objects, moving loads, and transmitting power between machines.
They can also be combined with other pulleys and mechanical systems to create complex machines that perform a wide range of tasks.
To know more about direction of motion:
https://brainly.com/question/3421105
#SPJ11
a student is 2.50m away from a convex lens while her image is 1.80m from the lens, what is the focal length?
To find the focal length of a convex lens, we can use the formula:
1/f = 1/di + 1/do
Where f is the focal length, di is the distance of the image from the lens, and do is the distance of the object from the lens.
We are given that the student is 2.50m away from the lens, so do = 2.50m. We are also given that the image is 1.80m from the lens, so di = 1.80m.
Plugging these values into the formula, we get:
1/f = 1/1.80 + 1/2.50
Simplifying this equation, we get:
1/f = 0.5556
Multiplying both sides by f, we get:
f = 1.80 / 0.5556
Solving for f, we get:
f ≈ 3.24 meters
Therefore, the focal length of the convex lens is approximately 3.24 meters.
To know more about focal length of a convex lens:
https://brainly.com/question/1031772
#SPJ11
A convex lens is 1.80 meters from a student who is 2.50 meters distant, and its focal length is 1.04 meters.
To solve this problem, we can use the lens equation:
1/f = 1/do + 1/di
where f is the focal length of the lens, do is the object distance (distance of the object from the lens), and di is the image distance (distance of the image from the lens).
In this problem, the object distance is do = 2.50 m and the image distance is di = 1.80 m. We can plug these values into the lens equation and solve for the focal length:
1/f = 1/do + 1/di
1/f = 1/2.50 + 1/1.80
1/f = 0.4 + 0.56
1/f = 0.96
f = 1/0.96
f ≈ 1.04 meters
Therefore, the focal length of the convex lens is approximately 1.04 meters.
To learn more about focal length, refer:-
https://brainly.com/question/29870264
#SPJ11
newton's second law: a box of mass 50 kg is at rest on a horizontal frictionless surface. a constant horizontal force f then acts on the box and accelerates it to the right. it is observed that it takes the box 8.0 seconds to travel 32 meters. what is the magnitude of the force?
The magnitude of the force is 25 Newtons.
We can use Newton's second law, which states that the net force (F_net) acting on an object is equal to its mass (m) times its acceleration (a):
[tex]fnet = m*a[/tex]
The final velocity can be calculated using the formula:
[tex]v = d/t[/tex]
where d is the distance travelled and t is the time taken. Plugging in the values, we get:
v = 32 m / 8.0 s
v = 4.0 m/s
Therefore, the acceleration is:
a = Δv / Δt
a = 4.0 m/s / 8.0 s
a = 0.5 m/s^2
Now we can use Newton's second law to find the magnitude of the force:
F_net = 50 kg * 0.5 m/s^2
F_net = 25 N
To know more about newton's second law:
https://brainly.com/question/13447525
#SPJ4
The majority of Venus's surface is:
A. volcanic plains with flowing lava.
B large, flat mesas with tiny valleys.
C. thick, soupy clouds of hydrogen.
D. frozen dunes of dust and sand.
Answer:
C.
Explanation:
When Venus surface get bit cold when weather hits the planet gets soupy clouds and etc.
catching a wave, a 73.2-kg surfer starts with a speed of 1.44 m/s, drops through a height of 1.84 m, and ends with a speed of 8.89 m/s. how much nonconservative work was done on the surfer?
The nonconservative work done on the surfer is 2845.5 J.
We can use the work-energy theorem to solve this problem. The work-energy theorem states that the net work done on an object is equal to its change in kinetic energy. In this case, we can calculate the initial and final kinetic energies of the surfer and find the difference, which will give us the net work done.
The initial kinetic energy of the surfer is:
[tex]K_i = (1/2) * m * v_i^2[/tex]
[tex]K_i = (1/2) * 73.2 kg * (1.44 m/s)^2[/tex]
K_i = 75.7 J
The final kinetic energy of the surfer is:
[tex]K_f = (1/2) * m * v_f^2[/tex]
[tex]K_f = (1/2) * 73.2 kg * (8.89 m/s)^2[/tex]
K_f = 2921.2 J
The change in kinetic energy is:
ΔK = K_f - K_i
ΔK = 2921.2 J - 75.7 J
ΔK = 2845.5 J
According to the work-energy theorem, this change in kinetic energy must be equal to the net work done on the surfer. Therefore, the nonconservative work done on the surfer is:
W_nc = ΔK
W_nc = 2845.5 J
So, the nonconservative work done on the surfer is 2845.5 J.
Learn more about nonconservative work
https://brainly.com/question/28588859
#SPJ4
at what speed do a bicycle and its rider, with a combined mass of 90 kg , have the same momentum as a 1600 kg car traveling at 4.8 m/s ? express your answer to two significant figures and include the appropriate units.
the amplitude of the electric field of an electromagnetic wave is 196. v/m. what is the amplitude of the magnetic field of the electromagnetic wave?
The amplitude of the magnetic field of the electromagnetic wave is 6.53 x 10^-7 T.
To find the amplitude of the magnetic field of an electromagnetic wave, we need to use the relationship between the electric and magnetic fields in an electromagnetic wave.
According to this relationship, the amplitude of the magnetic field is equal to the amplitude of the electric field divided by the speed of light (c). Therefore, if the amplitude of the electric field of an electromagnetic wave is 196 V/m, the amplitude of the magnetic field can be calculated as follows:
Amplitude of magnetic field = Amplitude of electric field / Speed of light
Amplitude of magnetic field = 196 V/m / 3 x 10^8 m/s
Amplitude of magnetic field = 6.53 x 10^-7 T
It is important to note that the amplitude of the magnetic field and the electric field of an electromagnetic wave are perpendicular to each other and are responsible for the wave's propagation through space.
To learn more about : electromagnetic
https://brainly.com/question/13874687
#SPJ11
A train car with a mass of 2000 kg is traveling east at 10 m/s. It is approaching another train car with a mass of 1000 kg also traveling east at 3 m/s. After the trains collide, the more massive train car continues east at 6 m/s. What is the new velocity of the less massive train car?
The new velocity of the less massive train car has a velocity of 10 m/s after the collision.
What is velocity?Velocity is a measure of the rate and direction of an object's motion. It is a vector quantity, meaning it has both magnitude and direction. Velocity is typically represented by the equation v = s/t, where v is the velocity, s is the displacement (or distance travelled), and t is the time taken. Velocity is often confused with speed, which is the measure of the magnitude of an object's motion. Speed is a scalar quantity and is represented by the equation s = t/v.
The total momentum of the two train cars before the collision is calculated by multiplying the mass of each car by its velocity.
The total momentum of the system before the collision is 2000 kg x 10 m/s + 1000 kg x 3 m/s = 23000 kg m/s.
The total momentum of the system after the collision is 2000 kg x 6 m/s + 1000 kg x v, where v is the velocity of the less massive train car after the collision.
Therefore, we can set up the equation 23000 = 12000 + 1000v and solve for v.
v = 10 m/s.
To learn more about velocity
https://brainly.com/question/24445340
#SPJ1
which particles have positive charges, and which have negative charges? sort the particles into positive and negative charged.
Protons have a positive charge, neutrons have no charge, and electrons have a negative charge.
The three fundamental particles in an atom are protons, neutrons, and electrons. Protons have a positive charge and are located in the nucleus of the atom, along with neutrons, which have no charge. Electrons have a negative charge and orbit the nucleus. The number of protons in an atom determines its atomic number, which in turn determines the element to which it belongs.
The number of electrons in an atom determines its chemical properties, as they are involved in chemical bonding with other atoms. The charges of the particles are important in determining the behavior of atoms in chemical reactions and in the formation of molecules and compounds.
To know more about charge, here
brainly.com/question/3412043
#SPJ4
--The complete question is, Which fundamental particles have positive charges, and which have negative charges?--
a bridge of length 50.0 m and mass 8.20 104 kg is supported on a smooth pier at each end as shown in the figure below. a truck of mass 2.50 104 kg is located 15.0 m from one end. what are the forces on the bridge at the points of support?
The forces at the left support are 1.61 x 105 N upward and the forces at the right support are 8.88 × 105 N downward by taking into account the forces acting on the bridge and the vehicle.
Finding the forces on a bridge with a truck positioned 15.0 metres from one end and piers supporting it at each end is the task at hand in this challenge. The truck weighs 2.50 x 104 kg, whereas the bridge is 50.0 metres long and 8.20 x 104 kg in weight.
The forces acting on the bridge at its places of support must be determined using Newton's laws of motion. We may determine that the forces at the left support are 1.61 x 105 N upward and the forces at the right support are 8.88 × 105 N downward by taking into account the forces acting on the bridge and the vehicle.
Learn more about forces:
https://brainly.com/question/30526425
#SPJ4
The complete question:
A bridge of length 50.0 m and mass 8.20×10^4 kg is supported on a smooth pillar at each end as shown. A truck of mass 2.50×10^4 kg is located 15.0 m from one end. What are the forces of the bridge at the points of support?
The melting of methane hydrates on the seafloor can lead to a sharp rise in global temperatures because methane is a powerful greenhouse gas (true or false)
The melting of methane hydrates on the seafloor can lead to a sharp rise in global temperatures because methane is a powerful greenhouse gas. The statement is true.
Methane is a powerful greenhouse gas, with a global warming potential that is estimated to be about 25 times greater than that of carbon dioxide over a 100-year time horizon. Methane hydrates are solid, crystalline compounds that contain a large amount of methane gas trapped within water molecules. These hydrates are stable under certain temperature and pressure conditions, but if they become destabilized, they can release large amounts of methane into the atmosphere.
The melting of methane hydrates on the seafloor is a concern because it has the potential to release vast amounts of methane into the atmosphere, which could significantly contribute to global warming and climate change. This process could be triggered by rising ocean temperatures, changes in ocean currents, or other factors that alter the stability of the hydrates. While the exact extent and impact of this phenomenon are still uncertain, it is an area of active research and concern among climate scientists.
To learn more about temperature, refer:-
https://brainly.com/question/2662380
#SPJ11