A) Find the mass of the metal washer, mw needed to obtain static equilibrium.
To obtain static equilibrium, the sum of the torques on the meter stick must be zero. This can be expressed mathematically as:
Στ = 0
Where Στ is the sum of the torques and is calculated by:
Στ = r1F1 + r2F2 + r3F3 + rwmw
Where r is the distance of the mass from the fulcrum and F is the force due to gravity acting.
Raphael wants to test the effect of different food types on the growth rate of mice. He measures the mass of thirty mice and separates them into three groups. Each group is given a different type of feed. All of the mice are kept in identical environments and given access to clean water.
After three months, Raphael measures the mass of the mice again. The results of Raphael's experiment are shown below.
Food Type Average Growth (g)
oat grains 1.5 g
cereal flakes 0.3 g
sunflower seeds 2.1 g
Which of the following is a fact that Raphael can determine from his experiment?
A.
Mice do not like the taste of cereal flakes.
B.
Sunflower seeds are the best type of food to feed pet mice.
C.
Mice that ate sunflower seeds gained an average of 2.1 grams.
D.
Bigger mice are more desirable as pets than smaller mice.
Mice that ate sunflower seeds gained an average of 2.1 grams that Raphael can determine from his experiment. Each group is given a different type of feed.
What is grams ?Grams (g) is a unit of measurement for mass in the International System of Units (SI). It is the base unit of mass in the SI, and is defined as being equal to the mass of a physical prototype, which is kept at the International Bureau of Weights and Measures. In practical terms, 1 gram is equal to 0.0352739619 ounces, or 0.00220462262 pounds. Grams are often used to measure the weight of food, medicines, and other small objects.
To learn more about grams
https://brainly.com/question/30337264
#SPJ1
A locust jumps at an angle of 55.0° and lands 0.750 m from where it jumped.
Aproximately 1.09 m/s was the locust's first speed.
What role do vectors have in mechanics?In engineering mechanics, vectors are used to express values with both a magnitude and a direction. For analysis, vector representations of a variety of engineering quantities—including forces, displacements, velocities, and accelerations—are required.
Δy = vsin(θ)t - 0.5gt²
0 = v*sin(55°)t - 0.5(-9.81 m/s²)*t²
t = 2vsin(55°)/g
Now, we can use the horizontal motion of the locust to find the initial velocity v. The horizontal distance traveled by the locust is given by:
Δx = v*cos(55°)*t
Substituting the expression for t that we just found:
0.750 m = vcos(55°)2vsin(55°)/g
Solving for v:
v = √(0.750 mg/(2sin(55°)*cos(55°)))
v ≈ 1.09 m/s
To know more about speed visit:-
https://brainly.com/question/28224010
#SPJ1
The length of the river span of a bridge is 2799.0 ft. The total length of the bridge is 6998ft. Convert the length of the river span of the bridge to meters.
According to the question the length of the river span of the bridge in meters is 853.3232 m.
What is Length?Length is a physical quantity that measures the distance between two points. It is one of the fundamental units in the International System of Units (SI). It is usually measured in meters, although it can also be measured in other units such as centimeters, kilometers, feet, yards, miles, and so on.
The length of the river span of the bridge is 2799.0 ft. To convert this length to meters, we need to use a conversion factor. There are 0.3048 meters in one foot, so the conversion factor we will use is 1 ft
= 0.3048 m.
To convert 2799.0 ft to meters, we multiply by the conversion factor:
2799.0 ft * 0.3048 m/ft
= 853.3232 m
Therefore, the length of the river span of the bridge in meters is 853.3232 m.
To learn more about Length
https://brainly.com/question/20599103
#SPJ1
A 6.5kg ball with radius 8 cm rolls without Stopping down a Lone at 5m/s. calculate its kenetic energy (I= ² / 3 MR²)
7. How do paragraphs 12-13 contribute to the development of ideas in the text? The Monroe Doctrine and American Imperialism
INTERTEXTUALITY is described as the modeling of a text's meaning by another text.
it can also be defined as the connections between language, images, characters, themes, or subjects depending on their similarities in language, genre or discourse. This view recognizes that the text is always influenced by previous texts.''
What does the text contain?A text contains many layers of accumulated, cultural, historical, and social knowledge, which continually adds to and affects one another. The function and effectiveness of intertextuality can often depend quite a bit on the reader’s prior knowledge and understanding before reading the secondary text; parodies and allusions depend on the reader knowing what is being parodied or alluded to.
11. Julia Kristeva, a French semiotician, coined the term "intertextuality" in the 1960s. The term was coined by her using the Latin verb intertexto, which means "to intermingle while weaving." According to Kristeva, every piece of contemporary literature is intertextual with literature from the past.
Learn more about "intertextuality" at: https://brainly.com/question/4667341
#SPJ1
A researcher investigated whether job applicants with popular (i.e. common) names are viewed more favorably than equally qualified applicants with less popular (i.e. uncommon) names. Participants in one group read resumes of job applicants with popular (i.e. common) names, while participants in the other group read the same resumes of the same job applicants but with unpopular (i.e. uncommon) names. The results showed that the differences in the evaluations of the applicants by the two groups were not significant at the .001 level
The researcher did not find strong evidence to support the idea that job applicants with popular names are viewed more favorably than equally qualified applicants with less popular names.
What factors plan an important role in the hiring process for a job?It sounds like the researcher conducted an experiment to investigate whether job applicants with popular names are viewed more favorably than equally qualified applicants with less popular names.
Based on the information provided, the researcher found that the differences in the evaluations of the applicants by the two groups were not significant at the .001 level.
The factors that play an important role in the hiring process for a job:
(1) Qualifications and experience: Employers typically look for candidates who possess the necessary qualifications and experience for the job. This includes education, training, certifications, and work experience.
(2) Skills and abilities: Employers also consider a candidate's skills and abilities related to the job. These may include technical, interpersonal, communication, and problem-solving skills.
(3) Personal characteristics: Personal characteristics, such as motivation, work ethic, and adaptability, can also play a role in the hiring process. Employers may look for candidates who demonstrate a positive attitude, a willingness to learn, and the ability to work well with others.
(4) Fit with company culture: Companies may also consider whether a candidate fits with their company culture, values, and mission. This can include factors such as teamwork, creativity, and innovation.
Learn more about evaluations here:
https://brainly.com/question/20067491
#SPJ1
5. A risk factor is an aspect of the child or environment that increases the probability of poor outcomes.
Name at least two (2) risk factors of childhood and how these factors might affect their ability to learn in
school. (2 Points)
Anyone pls
The two risk factors that can affect the ability of a child to learn in school is poor parenting and malnutrition.
What is a risk factor?A risk factor can be defined as any predisposing factor that can expose an individual to harm.
A risk factor that affects a child is an aspect of the child or environment that increases the probability of poor outcomes.
The two risk factors that can affect the ability of a child to learn in school include the following:
Poor parenting: When there is lack of understanding and love between the couple is affects the emotions of the children.Malnutrition: The brain of the child is yet to fully develop and this can be help through adequate nutrition.Learn more about nutrition here:
https://brainly.com/question/29512118
#SPJ1
The radius of the earth is 6.4 x 10^6 m . Calculate the angular and linear velocity of a participle at the earth's surface.
Answer: the angular velocity of a particle at the Earth's surface is approximately 7.27 x 10^-5 rad/s, and the linear velocity of the particle is approximately 464.1 m/s.
Explanation:
Two positively charged spheres are in deep space where gravity is negligible. The spheres are held in place near each other and then released from rest. What happens to the electric potential energy of the two-sphere system, and in what direction do the spheres move, after they are released?
The electric potential energy of the two-sphere system will be converted into kinetic energy as the spheres move away from each other. The direction of the spheres' movement will be away from each other, in opposite directions.
This is because the two positively charged spheres repel each other due to their like charges. As they move away from each other, the electric potential energy of the system decreases, while the kinetic energy of the spheres increases.
The law of conservation of energy dictates that the total energy of the system remains constant, but the energy is converted from potential to kinetic energy as the spheres move away from each other.
To know more about kinetic energy, visit:
https://brainly.com/question/26472013
#SPJ1
a wave has a frequency of 60 hertz and a wave speed of 20 m/s . what is the wavelength
Answer
the wavelength of the wave is approximately 0.333 meters.
Explanation:
1. A kid jumps straight up at 7.20 m/s. How long will he remain in the air?
The time takes the kid to remain in the air is 0.735 s.
What is time?Time is the duration of an events. The s.i unit of time is seconds.
To calculate how long the kid will be in the air, we use the formula below.
Formula:
t = (v-u)/g.................................... Equation 1Where:
t = Timev = Final Velocityu = Initial velocityg = Acceleration due to gravityFrom the question,
Given:
u = 7.20 m/sv = 0 m/sg = -9.8 m/s² (Going against the force of gravity)Substitute these values into equation 1
t = (0-7.20)/-9.8t = -7.20/-9.80t = 0.735 secondsHence, the time is 0.735 s.
Learn more about time here: https://brainly.com/question/10428039
#SPJ1
hot water is put into a refrigerator. if the refrigerator is power off, is that true that the more the water inside the refrigerator, the slower the temperature increase ?
No, that is not necessarily true. The temperature inside a refrigerator is regulated by a thermostat, which detects the temperature inside and turns the cooling system on or off as needed to maintain a consistent temperature. When hot water is put into a refrigerator, the temperature inside will initially increase as the refrigerator works to cool the water down to the desired temperature.
The amount of water inside the refrigerator can affect how long it takes to cool down to the desired temperature, but once the temperature has stabilized, the amount of water will not have a significant impact on the rate at which the temperature increases if the refrigerator is powered off. In fact, if the refrigerator is powered off, the temperature inside will gradually increase regardless of the amount of water inside.
Did the same thing happen to every type of light when it hit glass? Gamma Ray, x-ray, UV, visible, IR, microwave, radio?
Answer:
When light interacts with glass or any other transparent medium, its behavior depends on the wavelength or frequency of the light. Different types of light, such as gamma rays, X-rays, ultraviolet (UV) rays, visible light, infrared (IR) rays, microwaves, and radio waves, have different wavelengths and frequencies, and thus interact with glass in different ways.
In general, glass is transparent to visible light, allowing it to pass through without significant absorption or scattering. This is why we can see through glass windows or lenses. However, for other types of light, such as gamma rays, X-rays, and UV rays, glass can absorb or scatter them to varying degrees depending on the energy or frequency of the light and the composition of the glass. For example, lead glass or certain types of high-density glass can effectively block or absorb high-energy radiation such as gamma rays and X-rays.
Infrared (IR) rays, which have longer wavelengths than visible light, are also generally transmitted through glass, although some types of glass may absorb or scatter them at specific wavelengths. Microwave and radio waves, which have much longer wavelengths, are also generally transmitted through glass without significant absorption or scattering.
It's important to note that the interaction of light with glass can also depend on other factors, such as the thickness and quality of the glass, as well as the angle at which the light strikes the glass surface. In some cases, glass may exhibit special properties, such as polarization or refraction, which can affect the behavior of light passing through it. Overall, the interaction of different types of light with glass can vary, and it depends on the specific characteristics of the light and the glass material involved.
Explanation:
A helium-neon laser beam has a wavelength in air of 633 nm. It takes 1.43 ns for the light to travel through 29.0 cm of an unknown liquid.
What is the index of refraction of the liquid?
The unidentified liquid has an index of refraction of 1.48.
What type of 667 nm chromatic light is created by a helium-neon laser?A helium neon laser generates monochromatic light with a wavelength of 667 nm. 9 mW of electricity are released. Average photon arrival rates at a target exposed to this beam are 3 10 photons per second.
In a medium, light travels at a speed of v=c/n.
We can first calculate the speed of light in the unknown liquid using the distance traveled and the time taken:
distance = 29.0 cm = 0.29 m
time = 1.43 ns = 1.43 x 10⁻⁹ s
speed of light in liquid = distance/time
= 0.29 m / 1.43 x 10⁻⁹ s = 2.03 x 10⁸ m/s
Now, we can calculate the refractive index of the liquid using the speed of light in vacuum and the speed of light in the liquid:
n = c/v = 2.998 x 10⁸m/s / 2.03 x 10⁸ m/s = 1.48
To know more about refraction visit:-
https://brainly.com/question/14760207
#SPJ1
In the Roman soldier model for refraction, a muddy stream crosses the road they are on walking on at 45°. Will the soldiers in the front row all hit the water at the same time?
A. Sometimes
B. Yes
C. No
D. Not enough info
C. No.
The Roman soldier model for refraction assumes that light travels faster in air than in water. When light passes from a medium of lower refractive index (air) to a medium of higher refractive index (water), it bends towards the normal (a line perpendicular to the surface of the water at the point of incidence).
In the case of the muddy stream crossing the road at an angle of 45 degrees, the soldiers in the front row will hit the water first, and then the soldiers behind them will hit the water progressively later. This is because the light from the front of the stream reaches the soldiers' eyes first, while the light from the back of the stream takes a longer path and reaches their eyes later.
Therefore, the soldiers in the front row will not hit the water at the same time.
Look at each written description and equation. Determine if the solution to the equation answers the question by selecting Yes or No.
A
A long-distance athlete can run 12
kilometer in 3 minutes. How many kilometers can he run in an hour?
12 km360 hr=12×603
Yes No B
A search and rescue drone can scan 0.5 hectare in 2 minutes. How many hectares per minute can the drone scan?
510 ha2 min=510×21
Yes No C
In 15 minutes a crew of highway workers paved 110
mile. If they work at the same rate, what portion of a mile will they pave in 1 hour?
14 hr110 mi=14×101
Yes No D
A soup recipe uses 112
cups of water for every 14
teaspoon of seasoning. If a large batch of soup is made using 1 teaspoon of seasoning, how many cups of water is needed?
32 c14 tsp=32×41
Yes No
please help me in this exercise
a. We can actually see here that the girl have kinetic energy which is respect to the escalator.
b. The kinetic energy does not depend on the chosen reference.
What is kinetic energy?Kinetic energy is a form of energy that an object possesses due to its motion. It is defined as the work needed to accelerate a body of a given mass from rest to its current velocity. Kinetic energy is a scalar quantity, meaning it only has magnitude and no direction. The formula for calculating kinetic energy is:
KE = 1/2 × m × v²
Where KE is the kinetic energy, m is the mass of the object, and v is its velocity.
The concept of kinetic energy was first introduced by the French mathematician Gaspard-Gustave de Coriolis in 1829. It was later developed by other scientists such as James Prescott Joule and Hermann von Helmholtz.
Learn more about kinetic energy on https://brainly.com/question/8101588
#SPJ1
Our group recommends that the following method of electrical energy generation be used on venus:
The reasons for this include:
A negative of this method that must be overcome is:
A backup method of generating electricity that we recommend is:
Solar energy is abundant on Venus due to its proximity to the sun, and it can be harnessed using photovoltaic panels. This method is relatively low-maintenance and environmentally friendly, but its efficiency can be affected by the planet's thick cloud cover.
Electricity generation in VenusSolar, hydro, and nuclear are all viable methods of electrical energy generation, and each has its own unique advantages and disadvantages.
Solar energy is abundant on Venus due to its proximity to the sun, and it can be harnessed using photovoltaic panels. This method is relatively low-maintenance and environmentally friendly, but its efficiency can be affected by the planet's thick cloud cover.Hydroelectric power is generated using the kinetic energy of falling water, which could be possible if there were rivers or waterfalls on Venus. This method is reliable and has low operating costs, but it requires a significant amount of water and infrastructure.Nuclear power uses the energy released from nuclear reactions to generate electricity. It has a high energy output and can provide a constant power supply, but it also carries risks associated with radioactive waste disposal and reactor accidents.One negative aspect of these methods is that they all require significant investment in infrastructure and technology to implement on Venus, which could pose challenges given the planet's harsh conditions.
As a backup method of generating electricity, we recommend the use of wind turbines. If the conditions are right, Venus could have strong winds that could be harnessed to generate electricity. Wind turbines are relatively low-cost and easy to maintain, and they could provide a reliable backup power source in case of any issues with the primary power generation methods.
Learn more on electricity generation here https://brainly.com/question/14391018
#SPJ1
What inductance must be put in series with a 100-kiloohm resistor at 1.0-MHz for a total impedance
of 150 kiloohm
An inductance of 0.0191 H (19.1 mH) must be put in series with the 100-kiloohm resistor to achieve a total impedance of 150 kiloohm at 1.0 MHz.
What is Induction?
Induction refers to the production of an electric or magnetic effect through the relative motion or change in magnitude of a magnetic field or electric current. This phenomenon is based on the principles of electromagnetism and is commonly used in various electrical and electronic devices, including transformers, motors, generators, and wireless charging systems.
The total impedance can be calculated using the following formula:
Z_total = sqrt([tex]R^{2}[/tex] X_[tex]L^{2}[/tex])
where R is the resistance (100 kiloohm) and X_L is the inductive reactance. We can rearrange this formula to solve for X_L:
At 1.0 MHz, the angular frequency is:
w = 2πf = 2π × 1.0 × [tex]10^{6}[/tex] = 6.28 × [tex]10^{6}[/tex]ad/s
The inductive reactance can be calculated using the following formula:
X_L = wL
where L is the inductance in henries. We can rearrange this formula to solve for L:
L = X_L / w
Now we can substitute the given values and solve for L:
X_L = sqrt((150 ×[tex]10^{3}[/tex]) - (100 ×[tex]10^{3}[/tex])) = 120 × [tex]10^{3}[/tex] ohm
L = X_L / w = 120 × [tex]10^{3}[/tex] ohm / 6.28 × [tex]10^{6}[/tex] rad/s = 0.0191 H
Learn more about Induction from the given link
https://brainly.com/question/30049273
#SPJ1
As you sit in a fishing boat, you notice that 12 waves pass the boat every 45 s. If the distance from one crest to the next is 9.0 m what is the speed of these waves?
Express your answer to two significant figures and include the appropriate units.
The frequency of the waves can be calculated as the number of waves passing a given point per unit of time. In this case, the frequency is:
f = (number of waves) / (time)
f = 12 waves / 45 s
f = 0.267 Hz
The wavelength is the distance between two adjacent wave crests, which is given as 9.0 m in the problem.
What is the speed of these waves?The speed of the wave can be calculated using the formula:
v = f × λ
where v is the wave speed, f is the frequency, and λ is the wavelength.
Substituting the values given, we get:
v = 0.267 Hz × 9.0 m
v = 2.40 m/s
Therefore, the speed of the waves is 2.40 m/s (to two significant figures).
Learn more about wave from
https://brainly.com/question/23739080
#SPJ1
A large piston in a hydraulic lift has an area of 100 cm2. The force needed to a small piston with an area of 15 cm2 to lift a 1800 kg car is _ kg
The force needed to lift the 1800 kg car with the small piston is 2,649 N or approximately 270 kg (since 1 kg is equal to 9.81 N).
The hydraulic lift works based on Pascal's principle, which states that the pressure applied to a confined fluid is transmitted equally in all directions throughout the fluid.
Assuming there is no loss of energy due to friction or other factors, the force exerted on the small piston will be equal to the force exerted on the large piston. This can be expressed as:
F1/A1 = F2/A2
where F1 is the force exerted on the large piston, A1 is the area of the large piston, F2 is the force exerted on the small piston (which we want to find), and A2 is the area of the small piston.
We can rearrange this equation to solve for F2:
F2 = (F1/A1) x A2
Given that the area of the large piston is 100 cm², we can calculate the force exerted on the large piston by using the weight of the car and the gravitational acceleration:
F1 = m x g = 1800 kg x 9.81 m/s² = 17,658 N
Substituting the values into the equation, we get:
F2 = (17,658 N / 100 cm2) x 15 cm² = 2,649 N
Therefore, the force needed to lift the 1800 kg car with the small piston is 2,649 N or approximately 270 kg (since 1 kg is equal to 9.81 N).
To know more about Pascal's principles, visit:
https://brainly.com/question/30258629
#SPJ1
In the diagram, q₁, q2, and q3 are in a straight line.
Each of these particles has a charge of
-2.35 x 10-6 C. Particles q₁ and q2 are separated
by 0.100 m and particles q2 and q3 are separated
by 0.100 m. What is the net force on particle q₁?
Remember: Negative forces (-F) will point Left
Positive forces (+F) will point Right
The net force on particle q₁ is 9.22 × 10^-13 N, and it points to the left.
How do we calculate?The net force on particle q₁ due to particles q2 and q3 can be found using Coulomb's law.
Coulomb's law states that the force between two charged particles is given as
F= k * (q₁ * q₂) / r^2
Since q₁ and q₂ have the same charge, the force between them is repulsive, i.e., it points to the left. Using Coulomb's law, we can find the magnitude of this force:
F₁₂ = k * (q₁ * q₂) / r₁₂^2
F₁₂ = (9 × 10^9 Nm^2/C^2) * (-2.35 × 10^-6 C)^2 / (0.100 m)^2
F₁₂ = -4.61 × 10^-13 N
Here, the force between q₁ and q₂ points to the left, and its magnitude is 4.61 × 10^-13 N.
The force between q₂ and q₃ also points to the left, and its magnitude is given as
F₂₃ = k * (q₂ * q₃) / r₂₃^2
F₂₃ = (9 × 10^9 Nm^2/C^2) * (-2.35 × 10^-6 C)^2 / (0.100 m)^2
F₂₃ = -4.61 × 10^-13 N
Here, the force between q₂ and q₃ also points to the left, and its magnitude is 4.61 × 10^-13 N.
F_net = -F₁₂ - F₂₃
F_net = -(-4.61 × 10^-13 N) - (-4.61 × 10^-13 N)
F_net = 9.22 × 10^-13 N
Learn more about force at: https://brainly.com/question/12970081
#SPJ1
80 POINTS!!!!!!!!! NO BOTS UR OWN ANSWER!
The speed of water waves decreases as the water becomes shallower. Suppose waves travel across the surface of a lake with a speed of 2.0 m/s and a wavelength of 1.9 m When these waves move into a shallower part of the lake, their speed decreases to 1.7 m/s , though their frequency remains the same.
Find the wavelength of the waves in the shallower water.
Express your answer to two significant figures and include the appropriate uni
The wavelength of the waves in the shallower water, given that their frequency remains the same is 1.5 m
How do i determine the wavelength of the waves?First, we shall determine the frequency of the waves. details below:
Speed of waves in lake (v) = 2.0 m/sWavelength of waves in lake (λ) = 1.9 mFrequency of waves (f) =?Velocity (v) = wavelength (λ) × frequency (f)
2 = 1.9 × frequency
Divide both sides by 1.9
Frequency = 2 / 1.9
Frequency = 1.1 Hertz
Finally, we shall determine the wavelength of the waves in the shallower water. Details below:
Speed of wave in shallower water (v) of = 1.7 m/sFrequency of waves (f) = 1.1 HzWavelength in shallower water (λ) = ?Velocity (v) = wavelength (λ) × frequency (f)
1.7 = wavelength × 1.1
Divide both sides by 1.1
Wavelength = 1.7 / 1.1
Wavelength in shallower water = 1.5 m
Learn more about wavelength:
https://brainly.com/question/30859618
#SPJ1
A U-tube is open to the atmosphere at both ends. Water is poured into the tube until the water rises part-way along the straight sides, and then some oil with a density of is poured into one end. This causes the water surface on that side of the tube to go down by and the surface on the other side to go up by the same amount. How much higher is the top surface of the oil on that side of the tube compared with the surface of the water on the other side of the tube?
The top surface of the oil on that side of the tube is 0.6 times higher than the surface of the water on the other side of the tube.
Describe principle of hydrostatics?The principle of hydrostatics, also known as Pascal's principle, states that when an external pressure is applied to a fluid in a container, that pressure is transmitted uniformly in all directions within the fluid, regardless of the shape or volume of the container. In other words, the pressure applied to a confined fluid will be distributed evenly throughout the fluid and will not change in magnitude at any point within the fluid. This principle is important in a number of applications, such as hydraulic systems, which use fluids to transmit force and pressure from one point to another. It is also used to explain how liquids exert pressure on the walls of their container and how objects can float or sink in fluids.
We can use the principles of hydrostatics to solve this problem. Let's call the height difference between the two water surfaces h. We can assume that the oil completely covers the water on one side of the tube and does not mix with it, so the oil and water form two separate liquid columns with a common interface. Let's call the height difference between the oil and water surfaces on the same side of the tube H.
The pressure at any given point in a fluid depends only on the depth of that point below the surface of the fluid and the density of the fluid. Since the two water columns are at the same height, they experience the same pressure from the atmosphere. Similarly, the two oil columns experience the same pressure from the atmosphere.
Now consider a point on the interface between the oil and water on the same side of the tube. This point is at a depth of h+H below the water surface on the other side of the tube, so the pressure at this point is greater than atmospheric pressure by an amount equal to the product of the density of water, the acceleration due to gravity, and the total depth (h+H):
P = Patm + ρwatergh
where P is the pressure at the interface, Patm is atmospheric pressure, ρwater is the density of water, g is the acceleration due to gravity, and h+H is the total depth.
Similarly, the pressure at this point is less than atmospheric pressure by an amount equal to the product of the density of oil, the acceleration due to gravity, and the depth of the oil column (H):
P = Patm - ρoilgH
Since the interface between the oil and water is at the same pressure, we can equate these two expressions for P:
Patm + ρwatergh = Patm - ρoilgH
Solving for H, we get:
H = h(ρwater/ρoil)
Substituting the given values, we get:
H = 0.6h
Therefore, the top surface of the oil on that side of the tube is 0.6 times higher than the surface of the water on the other side of the tube.
To know more about pressure visit:
https://brainly.com/question/20816077
#SPJ1
Question 15 of 32
A bungee jumper jumps off a bridge and bounces up and down several times.
She finally comes to rest 30 m below the bridge from which she just jumped.
If her mass is 50 kg and the spring constant of the bungee cord is 10 N/m,
how much energy was lost due to air resistance while she was bouncing?
(Recall that g = 9.8 m/s²)
A. 7330 N
B. 9200 N
C. 10,200 N
D. 8605 N
C. 10,200 N is how much energy was lost due to air resistance while she was bouncing
How much energy was lostThe energy lost due to air resistance while the bungee jumper was bouncing can be calculated by finding the total mechanical energy of the system at the beginning of the jump and comparing it to the total mechanical energy at the end of the jump.
At the beginning of the jump, the total mechanical energy is given by:
Ei = mgh
where m is the mass of the bungee jumper, g is the acceleration due to gravity, and h is the height of the bridge. Therefore, at the beginning of the jump:
50 x 30 x 10 - 1/2 x 30^2 x 10
= 15000 - 4500
= 10,200 N
Read more on energy here:https://brainly.com/question/13881533
#SPJ1
5) A Brachiosaurus moves with a momentum of 134,052 kgm / s What is the Brachiosaurus' mass it is moving at 3.9m / s ?
The mass of Brachiosaurus moves with a momentum of 134,054 kgm/s and the velocity is 3.9 m/s, which is 34.37 kg.
The momentum is the product of mass and velocity. The momentum is the vector quantity and the unit of momentum is Kgm/s.
Momentum = mass × velocity
mass = momentum/velocity
momentum = 134,052 kgm / s
velocity = 3.9 m/s
mass = 134052 / 3.9
= 34.37 kg
Thus, the mass of Brachiosaurus is 34.37 kg.
To learn more about Momentum :
https://brainly.com/question/30677308
#SPJ1
Would you expect the smallest guitar string to produce waves in the glass of water at a higher or lower frequency?
Answer:
Explanation:
The frequency of the waves produced in the glass of water will depend on the frequency of the sound wave produced by the guitar string.
The frequency of a guitar string is inversely proportional to its length, thickness, and tension. Therefore, the thinnest string on a guitar will have the highest frequency, assuming that all other variables are kept constant.
Since the frequency of the sound wave produced by the thinnest guitar string is higher, we would expect the waves produced in the glass of water to also have a higher frequency than those produced by a thicker guitar string.
The following graph shows the kinetic energy of a roller coaster car as it passes through a loop.
Roller Coaster Car's Kinetic Energy
O B.
Kinetic Energy (kilojoules)
OC.
300
250
200
150
100
50
0
1
What was the most likely cause for the rise in kinetic energy after 2.5 seconds?
A. The roller coaster was pulled with decreasing gravitational force.
The roller coaster began slowing down.
The roller coaster started gaining elevation.
O D. The roller coaster began speeding up.
2
3
Time (s)
Reset
Next Question
5
6
Both the object's speed and mass affect how much kinetic energy it contains. Motional energy is produced while the roller coaster descends. The roller coaster's bottom of the track position is where the most kinetic energy is produced. Kinetic energy changes to potential energy when it starts to rise.
Energy changeThrough the transformation of potential energy into kinetic energy, roller coasters are propelled forward. As they are propelled to the peak of the first hill, the roller coaster vehicles accumulate potential energy. The cars drop as the potential energy is transformed into kinetic energy.Kinetic energy is produced by converting potential energy. As the car navigates hills, loops, twists, and turns, this process keeps happening. With height, it increases potential energy, but as it slows down, it loses kinetic energy. Energy only changes from one form to another; it never creates or destroys itself.For more information on kinetic energy of roller coaster kindly visit to
https://brainly.com/question/3437220
#SPJ1
A fluid can be either a liquid or a gas.
A.True
B.False
A.True
They are both a fluid because they can flow/move as the particles in them are not fixed in position like a solids particles.
ABSOLUTELY NO USE OF CHATGPT AND AI BOTS TO ANSWER THIS QUESTION IT MUST BE ANSWERED BY YOU AND ONLY YOU, ANSWER WILL BE REPORTED IF CAUGHT USING CHATGPT!
—
50 POINTS!!
—
A wave oscillates 5.0 times a second and has a speed of 4.0 m/s
-
What is the frequency of this wave?
Express your answer to two significant figures and include the appropriate units.
-
What is the period of this wave?
Express your answer to two significant figures and include the appropriate units.
-
What is the wavelength of this wave?
Express your answer to two significant figures and include the appropriate units.
The answers are:
Frequency = 5.0 HzPeriod = 0.20 sWavelength = 0.80 mHow to solve for the frequencyThe frequency (f) of a wave is the number of oscillations (or cycles) per second and is measured in Hertz (Hz). The period (T) of a wave is the time it takes for one complete oscillation and is measured in seconds (s). The wavelength (λ) of a wave is the distance between two consecutive peaks (or troughs) and is measured in meters (m).
Given:
Frequency (f) = 5.0 Hz
Speed (v) = 4.0 m/s
We can use the formula:
f = v/λ
to find the wavelength of the wave.
Solving for λ, we get:
λ = v/f = 4.0 m/s / 5.0 Hz = 0.80 m
Therefore, the wavelength of the wave is 0.80 m.
To find the period of the wave, we can use the formula:
T = 1/f
Substituting the given frequency value, we get:
T = 1/5.0 Hz = 0.20 s
Therefore, the period of the wave is 0.20 s.
So the answers are:
Frequency = 5.0 Hz
Period = 0.20 s
Wavelength = 0.80 m
Read more on wavelength here:https://brainly.com/question/28995449
#SPJ1