Three of the primary components of air are carbon dioxide, nitrogen and oxygen in a sample containing a mixture of these gases at two atmosphere of pressure, with a partial pressure of : PCO2 = 30.185 mmHg, PN2 = 1009.525 mmHg. What is the partial pressure of oxygen?

Answer: 1,840 million years old.

Explanation:

According to the question the molarity of the k2co3 solution will be 1.74 M.

In baked goods like cakes, wafers, and cookies, potash carbonate can take the place of bicarbonate. Foods become significantly healthier and retain a significant amount of their yeast power thanks to the reduction in salt content.

Breads, biscuits, or other baked products can be made using potassium carbonate instead of sodium hydroxide. As a result, meals become considerably healthier and retain a significant amount of their leavening power.

Molarity=No. of moles/Volume of Soln.

M= 6.97/4.00

M= 1.74M

To know more about potassium carbonate visit;

https://brainly.com/question/30231290

#SPJ4

Answer:

ZnS

Explanation:

Because there are two tetrahedral holes per anion (sulfide ion) and one-half of these holes are occupied by zinc ions, there must be 1 2 1 2 × 2, or 1, zinc ion per sulfide ion. Thus, the formula is ZnS. Check Your Learning

The identity of the metal that has a mass of 45.9g and volume or 17.0mL is aluminium (2.7g/mL) (option B).

Density is the measure of the mass of matter contained by a unit volume. The density of a substance can be calculated using the following formula;

Density = mass ÷ volume

According to this question, if a sample of metal has a mass of 45.9g and occupies a volume of 17.0 mL, the density can be calculated as follows:

Density = 45.9g ÷ 17.0mL

Density = 2.7g/mL

Therefore, the identity of the metal is aluminium with a density of 2.7g/mL.

Learn more about density at: https://brainly.com/question/6107689

#SPJ1

When the gas syringe gets inserted into and attached to the Erlenmeyer flask which contains the methane gas, the gas expands and enters the gas syringe.

Charles law states that the volume which is occupied by an ideal gas is directly proportional to the absolute temperature at constant pressure conditions. It also sometimes known as the law of volumes as it also describes how gases are able to expand with increase in temperature.

When a syringe is inserted into the Erlenmeyer flask which contains the methane gas, some of that gas in the flask expands and enters into the syringe.

--The given question is incomplete, the complete question is

"What happens after the gas syringe is inserted into the Erlenmeyer flask containing the methane gas?"--

To know more about Erlenmeyer flask here

https://brainly.com/question/25488854

#SPJ4

Answer:

Therefore, the mass of 3.24 x 10^-15 molecules of CO2 is approximately 7.304 x 10^-14 grams.

Explanation:

To calculate the mass of a certain number of molecules of a substance, you need to know the molar mass of the substance and convert the number of molecules to moles.

The molar mass of CO2 is 44.01 g/mol. To convert the number of CO2 molecules to moles, we can use Avogadro's number which is 6.022 x 10^23.

So, moles of CO2 = (3.24 x 10^-15 ) / (6.022 x 10^23)

mass of CO2 = moles * molar mass = (3.24 x 10^-15 ) / (6.022 x 10^23) * 44.01 g/mol = 7.304 x 10^-14 g

Therefore, the mass of 3.24 x 10^-15 molecules of CO2 is approximately 7.304 x 10^-14 grams.

nitrogen and chloro fluro carbon gas is not an example of a naturally occurring greenhouse gas

Water vapour, carbon dioxide, methane, nitrous oxide, and ozone are examples of naturally occurring greenhouse gases. Hydro-fluorocarbons (HFCs), perfluorocarbons (PFCs), and sulphur hexafluoride (SF6) are examples of artificial greenhouse gases that are produced via a number of industrial operations. Carbon dioxide, methane, ozone, nitrous oxide, chlorofluorocarbons, and water vapour are some examples of greenhouse gases. The gas that is not a greenhouse gas is therefore nitrogen. The different greenhouse gases include nitrous oxide, water vapour, ozone, chlorofluorocarbons, methane, and chlorofluorocarbons. Infrared light cannot pass through oxygen or nitrogen, hence they are not considered greenhouse gases. These molecules are invisible because stretching one of them has no effect on the electric field. These symmetric molecules are composed of two identical atoms whose electric fields simply cancel one another out.

which gas is not an example of a naturally occurring greenhouse gas?

1. nitrogen

2.cholrofluoro carbons

3. oxygen

4. carbondioxide

Learn more about nitrogen here:

https://brainly.com/question/16711904

#SPJ4

18.26 grams of aluminum can be recovered from a 34. 5 g sample of Al2O3.

Al is the chemical element's symbol, and its atomic number is 13. Aluminum has a density that is around one third that of steel, which is lower than that of most common metals. It has a strong affinity for oxygen, and when exposed to air, creates a protective oxide coating on the surface. Aluminum visually resembles silver due to similarities in colour and light-reflecting properties.

2Al2O3 → 2Al + 3O2

Al2O3 has a molecular weight of 102.

Al's atomic weight is 27.

We may write from the stoichiometric equation:

It is possible to recover 54 g of Al from 102 g of Al2O3.

So, 18.26 g of Al may be recovered from 34.5 g of Al2O3 (54/102).

There fore  18.26 g of aluminium is recovered.

learn more about Aluminum Refer:brainly.com/question/19761029

#SPJ4

The concentration of the unknown acid is calculated to be 9.6605/ volume of the unknown acid

The following formula can be used to calculate the concentration of the unknown acid;

as we know moles is concentration multiply by volume

so,

C₁V₁ = n₁

C₂V₂ = n₂

Where C is concentration v is volume and n is moles. C₁V₁ is unknown acid and  C₂V₂ is KOH

At the equivalence point;

n₁ =n₂

Therefore;

C₁V₁ =  C₂V₁

Assuming that the volume of KOH is 13.90 ml and that (concentration of the unknown acid) = 0.695 M

Therefore, C₁ or concentration of unknown acid can be calculated as follows;

C₁V₁ =  C₂V₂

C₁ =  C₂V₂ /  V₁

C₁ =  0.695 x 13.90  / V₁

Ca = 9.6605 / V₁

Learn more about concentration https://brainly.com/question/13024825

#SPJ4

Answer:

The strength of the forces holding the particles of a substance together determines its physical state at a given temperature. The stronger the forces the more energy required to overcome them and hence the particles remain in a fixed position and the substance is solid, while weaker forces may allow the particles to move freely making the substance a gas.

Explanation:

In the case of carbon dioxide (CO2), the particles are held together by weak van der Waals forces. These forces are not strong enough to keep the particles in a fixed position, so they are able to move freely and take on the properties of a gas at room temperature.

In the case of water (H2O), the particles are held together by hydrogen bonds. These bonds are stronger than the van der Waals forces in CO2, so the particles are not able to move as freely. As a result, water takes on the properties of a liquid at room temperature.

Salt (NaCl) is made up of positively charged sodium ions (Na+) and negatively charged chloride ions (Cl-). These ions are held together by strong ionic bonds, which keep the particles in a fixed position. As a result, salt takes on the properties of a solid at room temperature.

Cx(H2O)y is the general formula for carbohydrates. Carbohydrates are the carbon hydrate in its natural form.

To learn more about carbohydrates refer to:

https://brainly.com/question/15902635

#SPJ1

Considering the definition of volume percentage, 187.5 mL of butane you would add to hexane to make 750 mL of a 25.0% by volume butane solution

Volume Percentage is defined as the ratio of the volume of the component to the volume of the solution, expressed as a percentage. That is, it refers to the volume of solute per 100 volume units of the solution.

The volume percentage of a solution is determined by the following expression:

Volume Percentage= (volume of solute÷ volume of solution) ×100%

In this case, you know:

Replacing in the definition of volume percentage:

25%= (volume of solute÷ 750 mL) ×100%

Solving:

25%÷ 100%= volume of solute÷ 750 mL

0.25= volume of solute÷ 750 mL

0.25× 750 mL= volume of solute

187.5 mL= volume of solute

Finally, the volume of butane in the solution is 187.5 mL.

Learn more about volume percentage:

brainly.com/question/1713808

#SPJ1

Car C has the highest momentum, followed by Car B, and Car A has the lowest momentum.

To learn more about Momentum refer to:

https://brainly.com/question/1042017

#SPJ1

The mass of a melted candle will not change after it has been melted.

To learn more about The mass of a melted candle refer to:

https://brainly.com/question/8732641

#SPJ1

1. The number of molecules in 67g of CO2 can be calculated using the molar mass of CO2, which is 44.01 g/mol. To find the number of molecules, we divide the mass of CO2 (67g) by the molar mass of CO2 (44.01 g/mol). This gives us: 67g / 44.01 g/mol = 1.52 x 10^23 molecules of CO2.

2. The mass of 3.01 x 10^23 atoms of FeO can be calculated using the molar mass of FeO, which is 71.847 g/mol. To find the mass, we multiply the number of atoms (3.01 x 10^23) by the molar mass of FeO (71.847 g/mol). This gives us: 3.01 x 10^23 atoms * 71.847 g/mol = 217.31 g

3. To calculate the mass of 9.65 x 10^23 atoms of iodine, we can use the molar mass of iodine, which is 126.904 g/mol. To find the mass, we multiply the number of atoms (9.65 x 10^23) by the molar mass of iodine (126.904 g/mol). This gives us: 9.65 x 10^23 atoms * 126.904 g/mol = 1218.56 g rounded to one decimal point.

Interactions between ions and dipoles. Ion-Dipole Forces were engaged for solutions in which an ionic chemical is immersed in a polar solvent, for example a table salt (NaCl) water solution.

Ion-dipole intermolecular forces seem to be electrostatic reactions between such a polar molecule as well as an ion that are frequently caused by the dissolution of ionic compounds within polar substances. The attraction here between the negative ends of one polar molecule as well as the positive ends of another polar molecule is known as dipole-dipole forces.

In polar solvents, polar molecules were also soluble (Predominant intermolecular force will be a dipole-dipole attraction between polar solute molecule as well as polar solvent molecule).

To know more about polar solvent

https://brainly.com/question/20515334

#SPJ4

The mass of 1.45 L of ether is

4.9 x 10^-7 kg

It is given that

density of ether = 0.714 g/mL

volume of ether = 1.45 L = 1450 ml

We have to find mass of 1.45 L of ether

Density is the measurement of how tightly a material is packed together. It is defined as the mass per unit volume. Density Symbol, D or ρ Density Formula ρ = m/V, where ρ is the density, m is the mass of the object and V is the volume of the object.

Density = Mass/Volume

0.714 g/mL = Mass/1450 ml

Mass = 0.00049 gram

Mass = 4.9 x 10^-7 kg

Hence, mass of 1.45 L of ether is

4.9 x 10^-7 kg

Learn more about Density here:

https://brainly.com/question/1354972

#SPJ1

b- After the reaction is complete, rotovap the ethanol and redissolve in suitable organic solvent and water followed by separation . This is the correct option.

If the desired product is a non-polar organic substance and it is formed in a reaction run in ethanol, one way to extract the product would be to use liquid-liquid extraction method. The basic idea of this method is to use a solvent that is immiscible (i.e., does not mix well) with both the reaction mixture and the desired product.

Here are the general steps for a liquid-liquid extraction:

• Separate the reaction mixture into two layers, the aqueous layer and the organic layer, by using a separating funnel.

• Remove the aqueous layer and discard it.

• Take the organic layer, containing the desired product and ethanol and add a non-polar solvent, such as pentane, hexane, or diethyl ether to the organic layer.

• Shake the mixture vigorously to allow for the transfer of the desired product from the ethanol to the non-polar solvent.

• Separate the two layers by using a separating funnel.

• Remove the upper non-polar solvent layer, which should contain the desired product

• Dry the non-polar solvent layer if necessary, and evaporate the solvent if desired to isolate the pure product.

Note that the choice of the solvent and the specific steps may vary depending on the nature of the product and the reaction mixture.

learn more about ethanol here:

https://brainly.com/question/29294678

#SPJ4

At stp one mole of oxygen gas and one mole of neon atom both have

6* [tex]10^2^3[/tex] molcules which is avagardo number of molecules.

STP stands for "Standard Temperature and Pressure." In chemistry, it is commonly used as a reference point to describe the properties of gases. STP is defined as a temperature of 0 degrees Celsius (273.15 K) and a pressure of 1 atmosphere (101.325 kPa). At these conditions, the volume of one mole of any gas is 24.45 L.

So one mole of all gas have avagadro number of molecules in it.

To know more about avagardo number click on the link given below:

https://brainly.com/question/29964498#

#SPJ4

Since the equation for the given reaction is balanced, one mole of AgCl is created for every mole of CaCl2 that reacts. We may utilize the molar mass of CaCl2, which is (40.078 g/mol + 2*35.453 g/mol) = 111.012 g/mol.

to get the number of moles. Molar mass divided by mass equals a mole. moles equal 30 g / 111.012 g/mol, or 0.270 mol. CaCl2 and AgCl react 1:1, hence 0.270 mol of AgCl will be created from 0.270 mol of CaCl2 in this reaction. We may use the molar mass of AgCl, which is (107.868 g/mol + 35.453 g/mol) = 143.321 g/mol, to get the mass of AgCl created. mass is determined by multiplying the number of moles by the molar mass. mass = 143.321 g/mol x 0.270 mol, or 38.89 g Therefore, 38.89 g of AgCl will In chemistry, a mole is a unit of measurement that is used to represent how much a chemical compound is present. Avogadro's number, or 6.022 x 1023, of particles makes up one mole of a material. The mole is an useful way to express extremely large amounts of atoms, ions, or molecules since this quantity is so huge. The mole is based on the mass and number of atoms or molecules in a sample of a material.

learn more about  mole here:

https://brainly.com/question/26416088

#SPJ4

According to the equation, hydrogen peroxide in aqueous solution breaks down upon heat to produce oxygen: 2H2O2(aq)→2H2O(l)+O2(g).

To make 1.6g of oxygen gas, 34g of hydrogen peroxide must be in solution.

equation:

2H2O2 —————— O2 to 2H2O mole ratio is 2: 2: 1 RMM of O2 - (16*2) = 32 RFM of H2O2 - (1*2) + (16*2) = 34

1 Mole of O2 in 32 g? 1.6 g 1.6/32 = 0.5 moles

0.5*2 = 1 MOLE OF H2O2 and 34*34 = 34 g.

It is mainly present in Jupiter, and is present in the sun and the majority of stars. Water is where hydrogen is found most frequently on Earth. It only occurs as a gas in the atmosphere at trace concentrations, less than 1 part per minute by volume.

To know more about Hydrogen visit:

https://brainly.com/question/28937951

#SPJ1

A daisy is a flowering plant, and a pine tree is a non-flowering, cone-bearing plant. During the adult stage, the daisy produces seeds in the flower and the pine tree produces seeds in the cone. So, the correct option is (A).

Cones are also called strobilus. It is oval in shape, containing the reproductive organs of some non-flowering plants. Cones have unique feature of pines and other conifers, also found on all gymnosperms, some club mosses and horsetails.

Male cones produce pollen that is carried by the wind to female cones, after which the female gametes are fertilized by male gametes from the pollen, the female cones produce seeds, which are then scattered away from the plant by wind or animals.

Thus, a daisy is a flowering plant, and a pine tree is a non-flowering, cone-bearing plant. During the adult stage, the daisy produces seeds in the flower and the pine tree produces seeds in the cone. So, the correct option is (A).

Learn more about Cones, here:

https://brainly.com/question/28830457

#SPJ1

PARTICULATES in the air, including particulate matter, from DIESEL

ENGINES and DUST cause respiratory and cardiovascular health problems in humans

This refers to solid particles and liquid droplets found in the air. PM can be gotten from many places. In general, any type of burning or dust-generating activities are sources of PM. Some examples are Emissions (from vehicles and industrial plant smokestacks) etc.

We have two categories of particulate matter: primary and secondary particulate matter.

Primary particulate matter is emitted directly from:

Secondary particulate matter is formed in the atmosphere as a result of  complex chemical reactions.

Learn more about particulate matter on

https://brainly.com/question/15230454

#SPJ1

Covalent bonds are what occur when nearby atoms share electrons inside a molecule. Atoms share electrons in a covalent connection in order to reach their highest energy level.

Covalent bonds are also referred to as the valence shell because they have the right amount of electrons for a stable noble gas arrangement. Atoms can attain a more stable electron configuration and create a chemical bond because to this sharing of electrons.

The strength of the bond and the characteristics of the compound are determined by the amount of electrons shared, which is dependent on the number of electrons required to fill the valence shells of the atoms involved.

However, certain metal atoms may also create covalent bonds with non-metal atoms. Covalent bonds are commonly formed between non-metal elements. It is significant to remember that there are other types of bonds besides covalent ones, including ionic and metallic bonds.

learn more about Atoms  here:

https://brainly.com/question/1566330

#SPJ4

The Maillard reaction creates brown pigments in cooked meat in a very specific way: by rearranging amino acids and certain simple sugars, which then arrange themselves in rings and collections of rings that reflect light in such a way as to give the meat a brown color.

The advanced Maillard reaction involves breaking down the Amadori product into a variety of fission products that are composed of the sugar-amino complex. In the ultimate Maillard reaction, amino compounds and sugar fragments condense to form polymerized proteins and brown pigments called melanoidins. In the Maillard reaction, an organic chemical process, reducing sugars and amino acids combine to create a complex brew of chemicals. The distinct flavour and aroma of browned food are the result of this process. The French chemist Louis Camille Maillard's name is associated with the Maillard reaction.

Learn more about amino acids here:

https://brainly.com/question/13266141

#SPJ4

The steps done and develops human skills or builds structures to reduce risk you are doing​ is a. capacity building.

The capacity building is the process of the developing the skill or the strengthening the skills. There are the four steps in the capacity building.

1) Needs the assessment

2) Design

3) Implementation

4) Monitoring

These are process to reduce the risk of what you are doing. The capacity building includes the leadership developments. The capacity budling consist of the training and the mentorships.

Thus the capacity budling is The steps done and develops human skills or builds structures to reduce risk you are doing​

This question is incomplete, the complete question is :

The step done and develops human skills or builds structures to reduce risks you are doing.

a. capacity building

b. training

c. facility constructing

d. skills honing

To learn more about risk here

https://brainly.com/question/29321416

#SPJ4

To estimate the minimum detectable concentration of H2O2, we need to determine the amount of heat released during the reaction between catalase and hydrogen peroxide and compare it with the minimum detectable temperature rise. The reaction between catalase and hydrogen peroxide can be represented as follows:

2H2O2 (aq) + Catalase --> 2H2O (l) + O2 (g)

The amount of heat released during the reaction can be calculated using the equation:

ΔH = - n * ΔH°

Where n is the number of moles of H2O2 and ΔH° is the standard enthalpy of reaction for the reaction between catalase and hydrogen peroxide. The standard enthalpy of reaction can be estimated from the standard enthalpies of formation of the reactants and products.

Since the heat released by the reaction is proportional to the number of moles of H2O2, we can calculate the minimum detectable concentration of H2O2 by dividing the minimum detectable heat release by the heat capacity of the hydrogen peroxide solution and the ΔH°.

Assuming a heat capacity of 4.184 kJ/kg/K for the hydrogen peroxide solution and a temperature rise of 0.02oC, the minimum detectable heat release can be calculated as follows:

ΔQ = mcΔT

Where m is the mass of the hydrogen peroxide solution and c is the heat capacity.

Let's assume the mass of the hydrogen peroxide solution is 100 g. Then, the minimum detectable heat release can be calculated as follows:

ΔQ = (100 g) * (4.184 kJ/kg/K) * (0.02 K) = 0.83 kJ

The minimum detectable concentration of H2O2 can then be calculated as follows:

n = ΔQ / ΔH°

learn more about  hydrogen here:

brainly.com/question/28937951

#SPJ4