To use tlc, it is necessary to be able to see where the spots are after eluting and drying the plate.
What is TLC?
Non-volatile mixtures can be separated using the chromatography technique known as thin-layer chromatography (TLC). On a piece of glass, plastic, or aluminium foil that has been covered with a thin layer of an adsorbent substance—typically silica gel, aluminium oxide (alumina), or cellulose—thin-layer chromatography is carried out.
As a quick and non-destructive technique, using UV light to identify spots (compounds) on a TLC plate is quite popular. UV light is significantly absorbed by aromatic systems and highly conjugated systems. The majority of TLC plates include zinc sulphide, which gives them a green appearance when exposed to short-wavelength UV.
Iodine sublimes and reacts with the compounds on the TLC plate when the plate is placed in the chamber and covered, producing yellow-brown blotches (Figure 2.33d). Iodine interacts with numerous chemical molecules to produce colourful complexes, which causes the colouring. About half of the possible chemicals will work with this stain.
To learn more about TLC from the given link below,
https://brainly.com/question/24082436
#SPJ4
arene and functionalized arene based two dimensional organic-inorganic hybrid perovskites for photovoltaic applications
Our study reveals that both the perovskites are direct band gap semiconductors and possess desirable band gap for solar energy absorption.
What is perovskites?Calcium titanium oxide mineral perovskite is made up of calcium titanate and has the pronunciation /prvskat/. (chemical formula CaTiO3). The perovskite crystal structure, which is the same as that of CaTiO3 (XIIA2+VIB4+X23), is the name given to the group of substances that share this structure. A wide range of tailored materials can be created by embedding numerous different cations in this framework.
It was named after Russian mineralogist Lev Perovski after being found in the Ural Mountains of Russia by Gustav Rose in 1839. (1792–1856).
Victor Goldschmidt's study on tolerance factors from 1926 is where the noteworthy crystal structure of perovskite was first discovered. X-ray diffraction data on barium titanate by Helen Megaw led to the publication of the crystal structure in 1945.
To learn more about perovskites from the given link:
https://brainly.com/question/21299853
#SPJ4
classify each element. note that another term for main group is representative, another term for semimetal is metalloid, and the inner transition metals are also called the lanthanide and actinide series. you are currently in a sorting module. turn off browse mode or quick nav, tab to items, space or enter to pick up, tab to move, space or enter to drop. main‑group metal (representative metal) main‑group nonmetal (representative nonmetal) main‑group semimetal (metalloid) transition metal inner transition metal (lanthanide/actinide)
The classification of the metals is;
Main group/ representative metals - Tl
Main group non metal - Se, Rn
Main group metalloid - As
Transition metal - Mo
Inner transition metal - Ru, Eu
What is the periodic table?The periodic table is a classification of elements according to their atomic numbers. We know that elements are arranged in the periodic table in order of increasing atomic numbers of the elements.
Let us now classify each element as required;
Main group/ representative metals - Tl
Main group non metal - Se, Rn
Main group metalloid - As
Transition metal - Mo
Inner transition metal - Ru, Eu
Learn more about periodic table:https://brainly.com/question/11155928?
#SPJ4
A student wants to prepare a sugar solution for immediate use. Explain the factors that he should consider to prepare the solution.
answer based on factors affecting solubility
The factors affecting solubility the student should consider are temperature, pressure and surface area.
What is solubility?Solubility is the amount of solute that dissolves in a solvent.
Solubility can also be defined as the maximum amount of a substance that will dissolve in a given amount of solvent at a specified temperature.
Factors affecting solubilityThe following factors affect solubility of a solute;
Temperature: increase in temperature increases the solubility of a solute.Pressure: Gaseous substances are much more influenced than solids and liquids by pressure.Surface area: increase in surface area of a solute increases its solubility.However, there are two direct factors that affect solubility. They include temperature and pressure. Temperature affects the solubility of both solids and gases, but pressure only affects the solubility of gases.
Thus, the factors affecting solubility the student should consider in preparing the sugar solution for immediate use are temperature, pressure and surface area.
Learn more about solubility here: https://brainly.com/question/23946616
#SPJ1
Which molecule is formed when the protein ferrodoxin transfers electrons to an electron carrier? atp adp nadp nadph
why do bananas go bad after leaving them out for two weeks
what happens to a cysteine residue whose side chain was previously a free thiol when you treat it with dtt
Cysteine is an amino acids.
Used to making proteins and functions is to create metabolism.
thiol (-SH) is the side chain of cysteine residue.
thiol (-SH) often works in the agile site of enzymes. In protein molecules, two cysteine residues frequently make a disulphide bond, which is important in folding the proteins and balancing their structure.
When it free thiol (which is residue of cystine) is treat with dtt the important role of DTT in molecular biological test is to hold on to the proteins in a lower condition. Dtt is soluble in ethanol.
DTT can react with proteins without the help of cystine residue and that comes under biochemical reactivity.
To know more about Cysteine here :
https://brainly.com/question/14835777?referrer=searchResults
#SPJ4
Using the information in the table, calculate the number of formula units in a 33.8 g 33.8 g33, point, 8, space, g sample of strontium fluoride ( S r F 2 SrFX 2 ). Write your answer in scientific notation using three significant figures.
The number of formula units in a 33.8 g sample of strontium fluoride, SrF₂ is 1.62×10²³ formula
Avogadro's hypothesis1 mole of SrF₂ = 6.02×10²³ formula units
But
1 mole of SrF₂ = 125.62 g
Thus,
125.62 g of SrF₂ = 6.02×10²³ formula units
How to determine the formula units in 33.8 g of SrF₂125.62 g of SrF₂ = 6.02×10²³ formula units
Therefore,
33.8 g of SrF₂ = (33.8 g × 6.02×10²³ formula units) / 125.62 g
33.8 g of SrF₂ = 1.62×10²³ formula units
Thus, 1.62×10²³ formula units is present in 33.8 g of SrF₂
Learn more about formula units:
https://brainly.com/question/21494857
#SPJ1
What is a theory?
Group of answer choices
another word for hypothesis
an educated guess
a possible explanation of a general principle offered to explain observed facts
a possible explanation for a hypothesis
An explanation for a natural occurrence is provided by a hypothesis, which is supported by observation and testing.
A hypothesis is a well-informed prediction based on specific data that serves as the basis for more research.
Many of them dismiss evolution as "simply a hypothesis," in contrast to gravity, which must exist because it is a law. In the scientific community, the terms "theory," "facts," "laws," and "hypothesis" have extremely particular meanings that don't quite correspond to the ones we use in ordinary language. A testable hypothesis is a speculative explanation for an observable. It serves as a springboard for additional explanation. Contrarily, a theory is an explanation of a particular feature of the natural world that is supported by facts, validated hypotheses, and rules.
Learn more about hypothesis here:
https://brainly.com/question/17173491
#SPJ9
given that the density of mercury is 13.6 g/mL, and a sample is 4.2 cm^3, what is the mass of the sample?
I don't understand how to figure this out, so a step by step explanation would be great. Thanks!
Answer:
5.712g
Explanation:
density =mass÷volume
13.6g/mL=mass÷4.2cm^3
mass=13.6×4.2
mass=5.712g
claudia performed a flame test in her lab. the result of her flame test is shown here. what scientific questions could claudia ask about the flame? check all that apply. what element causes this flame color? is this the prettiest flame color? will the flame color change if another element is added? will changing the temperature affect the flame color? which flame test does the class like the best?
Claudia performed a flame test in her lab, different element causes different flame color, prettiest flame color means it is blue color flame, each element has different amount of extra energy, different part of flame have different temperature, blue color flame test class like the best.
Flame test means the method in which identify of unknown metal and metalloids ion on their characteristics and color which are come on heat on the Bunsen burner called flame test.
Here Claudia performed a flame test in her lab and in that flame test the scientific question could she ask that is and answer of this questions are as follow : different element causes different flame colour because each individual element had its own identity that's why different element causes different flame colour. prettiest flame color means it is blue colour flame this blue colour is so pretty to see in bunsen burner, each element has different amount of extra energy because when heated electron get excited and move to a diffrent orbit and as they cool down they move back to thier normal position and this extra energy produce light waves, different part of flame have different temperature, because different temperature take different colour on the flame like colder part show diffusion and flame will be red in this way, blue or orange colour test are like the class most because it seen so pretty on the bunsen burner.
Know more about flame test
https://brainly.com/question/28535459
#SPJ4
0.054619 + 0.363792 + 0.217056 = ? round the answer and sig fig
Answer:
0.64
Explanation:
which of the following sentences is the correct way to answer the following question te gusta ir a la escuela
The correct way to answer
Spanish Ques; te gusta ir a la escuela?
Ans; si, me gusta ir a la escuela.
English Ques; You like go to school?
Ans; I enjoy going to school.
Where spanish language is spoken?
Along with Spain in Europe and Equatorial Guinea in Africa, Spanish is the official language of 18 nations in the Americas (Venezuela, El Salvador, Ecuador, Bolivia, Chile, Colombia, Costa Rica, Cuba, Dominican Republic, Mexico, Nicaragua, Panama, Paraguay, and Uruguay.)
Twenty different countries have made Spanish their official language.
To learn more about Spanish click the given link
https://brainly.com/question/1402616
#SPJ4
A grignard synthesis begins with 6.00 g of bromobenzene and ends with 3.94 g benzoic acid. what is the percent yield of the benzoic acid? assume all other reagents are in excess.
6.00 g of bromobenzene and 3.94 g of benzoic acid are used in a grignard synthesis. 84.4% of the yield of benzoic acid is produced.
Given:
Grignard synthesis begins with
Bromobenzene = 6 g
to Benzoic acid = 3.94 g
122 g of benzoic acid would be generated from 157 g of bromobenzene.
As a result, 6 g of bromobenzene will result in
Then,
= 122 / 157 × 6
= 4.66g
3.94 is prepared then,
The percentage will be
(3.94/4.66) x 100 = 84.4 percent
An organomagnesium halide with the formula RMgX is a Grignard reagent, and in it, X is a halogen (-Cl, -Br, or -I), and R is an alkyl or aryl group (based on a benzene ring) group. A Grignard reagent is used to start a Grignard reaction, which produces a secondary or tertiary alcohol from a ketone or aldehyde.
To learn more about Grignard reagent click the givne link
https://brainly.com/question/26388782
#SPJ4
why is it important to know what substances you have available to work with, and how they might change when you developing special effects
Editing and VFX software has advanced to the point where the only limitations are your technical skills and your imagination
Although they are distinct, special effects and visual effects are frequently confused. There are further categories, however special effects are frequently manufactured artificially on set and are known as practical effects (for example, a controlled explosion in an action scene). On the other side, visual effects are produced in the editing room or post-production. While modern visual effects deal with animation, computer generated imagery (CGI), and other post-production effects, early visual effects saw filmmakers experimenting with film stock.
Each has advantages and disadvantages. According to filmmaker Steven Bernstein, special effects are frequently preferable because they allow actors to react to the effects in real time. They also provide lighting effects and other characteristics that would otherwise need expensive computer creation.
To learn more about special effects please visit-
https://brainly.com/question/11799347
#SPJ9
What are some examples of chemistry?
plisss
creo que es fermentacion
Answer:
Es Fermentación
Whta is a major difference between the rutherford and the wave mechnaical models of the atom?
A major difference between the Rutherford atomic model and the Wave mechanical model of atom is that Rutherford model was based on the gold foil experiment which considered only the particle properties of atoms whereas the wave mechanical model considers the particle properties and the wave properties of atoms.
Rutherford atomic model was given by Ernest Rutherford to explain what an atom is. His gold foil experiment showed that atom is mostly empty space with, small, dense, positively-charged nucleus.
Wave mechanical model was given by Thomas Young. He called the experiment as Double-slit experiment, to test the nature of the light. Young discovered that electrons of the atom exhibited the particle-wave dual properties which led to this theory named as wave mechanical theory of an atom.
These theories explain different properties of atoms with the help of different experiments.
To learn more about Rutherford model of atom,
brainly.com/question/2031894
#SPJ4
Although both sugar and salt are soluble in water, the way in which they dissolve is different. explain how their dissolving process is different, and elaborate why these differences exist.
Salt starts off as a compound, as it dissolves in ions, which always happens. Sugar, known as covalent, is bonded because they share electrons and stays together in compounds.
How do ionic compounds dissolve in water?
Ionic compounds dissolve in polar solvents, especially water. this happens when the positive cation from the ionic solid is attracted to the negative end of the water molecule (oxygen) and the negative anion of the ionic solid is attracted to the positive end of the water molecule (hydrogen)
Why do salt and sugar dissolve differently in water?
The polar water molecules attract the oppositely charged polar areas of the sucrose molecules and pull them away, leading to dissolving. Since the ions in salt and therefore the molecules bin sugar are very different, their solubilities tend to vary .
Learn more about covalent compounds :
brainly.com/question/11651796
#SPJ4
To get the most reliable temperature measurment, a thermometer should be placed ?
A thermometer should always be submerged in a substance just deep enough to completely cover the bulb in order to measure temperatures accurately.
What is thermometer?An instrument known as a thermometer is used to measure temperature or a temperature gradient. A thermometer consists of two key components: a temperature sensor that changes in response to changes in temperature and a way to translate these changes into a numerical value.
An instrument that measures temperature is a thermometer. It is able to gauge the temperature of solids like food, liquids like water, and gases like air.
to learn more about thermometer go to -
https://brainly.com/question/2339046
#SPJ4
HELP
What is true about a pseudoscientific idea?
It can be replicated and verified.
It is improved with new information.
It ignores parts of the method within an investigation.
It tries to explain natural phenomena by analyzing, observing, and testing.
Answer:
Explanation:
Pseudoscience consists of a body of knowledge presented as being derived from scientific experiments and methods while simultaneously failing to present evidence of its veracity. Belief in various pseudoscientific ideas has been widespread in different historical periods, and even in the present day
List 4 kinds of hazards that are caused by Volcanoes.
Four kinds of hazards that are caused by the volcanoes are lava flow, floods or tsunami, landslides, and volcanic earthquakes.
Volcanoes emits the hot, dangerous gases, ash, lava, and rocks which can be powerfully destructive. People have been dying from the volcanic blasts. Volcanic eruptions results in the additional menances to the health, such as floods, power outages, water contamination, and wildfires.
Ash exposure can be harmful to infants, elderly people, and people with respiratory conditions such as asthma, emphysema, and other chronic lung diseases.
Hazards such as -
Earthquakes such as preparing for, surviving, and recovering from an earthquake. Floods such as making sure food and water are safe, cleaning up, and emergency supplies. Landslides and Mudslides such as protective measures to take before, during, and after a landslide or debris flow. Power outages such as carbon monoxide poisoning, alternative heat and energy sources, downed power lines, and food and water safety. Wildfires such as smoke inhalation and other wildfire hazards.
Sources
To learn more about volcano hazards,
brainly.com/question/3809876
#SPJ1
Which isotope has a longer half-life? select the correct answer and explanation.
Xenon-124 isotope has a longer half life.
The duration needed for a quantity to decrease to half of its initial value is known as the half-life.One of those isotopes whose half life are longer is xenon 124, whose half-life has been calculated by experts to be 18 sextillion years due to its disintegration into tellurium 124.Half-life does not imply that atoms degrade at a constant rate. The figure simply represents the time it will take, on average, for the majority of a radioactive element to diminish itself by half.While the majority of xenon isotopes have half-lives of less than 12 days, Xenon-124 is believed to have extraordinarily long half-lives and to be fundamentally stable.These decays, which are the rarest processes ever directly recorded, have been detected in the XENON1T detector in 2019.Thus Xenon-124 has highest half life.
Learn more about half life here:
https://brainly.com/question/13979590
#SPJ4
A student is trying to classify an unidentified, solid gray material as a metal or a nonmetal. Which question will best help the student classify the material?
In order to help the learner categorize the material, the following inquiry is best:" Is the material malleable or ductile?".
What is a malleable material?
Any substance that can be easily hammered into a thin sheet is bendable. The metal that is most malleable is gold. In contrast, ductility refers to a solid material's capacity to deform when subjected to tensile stress.
A ductile substance is what?
The capacity of a material to be hammered thin or stretched into wire without breaking is known as its ductility. You can draw a ductile material into a wire. The majority of metals, including gold, silver, copper, erbium, terbium, and samarium, are excellent examples of ductile materials.
To learn more about physical properties of materials click on the link below:
https://brainly.com/question/1348773
#SPJ9
Questions:
A student is trying to classify an unidentified, solid gray material as a metal or a nonmetal. Which question will best help the student classify the material? A. Is the material malleable or ductile? B. Does the material feel hard to the touch? C. Will the material float in water? D. Does the material feel rough or smooth?
what mass of ammonium thiocyanate must be used if it is to react completely with 6.7 g barium hydroxide octahydrate?
Mass of ammonium thiocyanate must be used if it is to react completely with 6.7 g barium hydroxide octahydrate is 3.14g.
What is ammonium thiocyanate?Ammonium thiocyanate is an inorganic compound with formula NH4SCN. It is salt of the ammonium cation and the thiocyanate anion.
Ammonium thiocyanate is used in manufacture of herbicides, thiourea, and transparent artificial resins; in matches; as a stabilizing agent in photography; in various rustproofing compositions; as adjuvant in textile dyeing and printing; as a tracer in oil fields; in separation of hafnium from zirconium (important for the production of hafnium-free zircalloy for use in nuclear fuel cladding), and in titrimetric analyses.
Ammonium thiocyanate can also be used to determine iron content in soft drinks by colorimetry.
Ammonium thiocyanate may also be used to separate the quinidine, from liquors, after the isolation of quinine from the neutral, aqueous, sulphate solution. The salt is added to hot solution and the gummy solid that forms is strained off from the liquid. The solid is then refluxed with methanol, which dissolves most of mpurities, leaving the quinidine thiocyanate as a crystalline solid of 90 - 95% purity. Following the separation, (usually by centrifuge) the solid may then be further purified to pharmaceutical quality. (Quinidine is used for treatment of heart arrhythmia and therefore has considerable value.)
Ammonium thiocyanate = NH4SCN
Barium hydroxide octahydrate = Ba(OH)2 · 8H2O
Solution:
The Balanced chemical equation:
2NH4SCN + Ba(OH)2 · 8H2O → Ba(SCN)2 + 2NH3 + 10H2O
According to equation above: n[NH4SCN]/2 = n[Ba(OH)2 · 8H2O]
Molar mass of Ba(OH)2 · 8H2O is 315.46 g/mol.
Hence,
n[Ba(OH)2 · 8H2O] = (6.5 g) × (1 mol / 315.46 g) = 0.020605 mol
n[NH4SCN] = 2 × n[Ba(OH)2 · 8H2O] = 2 × 0.020605 mol = 0.04121 mol
Molar mass of NH4SCN is 76.122 g/mol.
Hence, mass of NH4SCN will be:
m(NH4SCN) = (0.04121 mol NH4SCN) × (76.122 g NH4SCN / 1 mol NH4SCN) = 3.137 g NH4SCN
Mass of the NH4SCN = 3.137 g = 3.14 g
To know more about barium hydroxide octahydrate visit: https://brainly.com/question/14400390
#SPJ4
How much 5.70 m naoh must be added to 670.0 ml of a buffer that is 0.0200 m acetic acid and 0.0260 m sodium acetate to raise the ph to 5.75?
Volume is:
0.009524 moles of NaOH x (1L / 5.80mol) = 1.64 x 10⁻³L = 1.64 mL of 5.80 M are added
Moles acetic acid and sodium acetate:Acetic acid: 0.550L x (0.0215mol/L) = 0.011825 moles
Acetate: 0.550L x (0.0255mol/L) = 0.014025 moles
Total no. of moles = 0.025 moles = [ Acetate ] + [ Acetic acid ] (1)
H-H equation:
pH = p Ka + log [ Acetate ] / [ Acetic acid ]
Where pH is 5.75;
pKa of acetic acid is 4.74 ;
5.75=4.74 + log[Acetate] /[Acetic acid]
10.2329 = [Acetate] / [Acetic acid] (2)
Replacing (1) in (2):
10.2329 = 0.02585 - [Acetic acid]/[Acetic acid]
10.23 [Acetic acid] = 0.025 - [Acetic acid]
11.2329 [Acetic acid] = 0.02585
[Acetic acid]= 0.002301 moles.
Moles acetate:
[Acetate]=0.025 moles -0.0023 moles =0.0235 moles
Initial moles 0.0140 moles, and moles of acetate added are:
0.0235 moles - 0.0140 moles = 0.0095 moles of NaOH
1.64mL of 5.80M are added
To learn more about Acetic acid visit the link
https://brainly.com/question/12924347
#SPJ4
a cell containing only pure water is placed into a solution containing 1m sucrose. the cell's membrane is impermeable to water, sucrose, sodium ions and chloride ions. how could you make the cell isosmotic to the outside solution?
Cell containing pure water with membrane impermeable to water, sucrose, sodium ions and chloride ions can't be made isosmotic to a solution of 1m sucrose.
Osmolarity represents the total amount or concentration of solute in a solution. Solution with low osmolarity means the solution has less solute particles, while solution with high osmolarity has more solute particles. Solution with low osmolarity is referred as hypoosmotic and solution with high osmolarity is referred as hyperosmotic.
When a cell is kept in a solution, the ability of the extra cellular solution to move the water across the cell membrane is called tonicity. Water move from low concentration of solute to high concentration of solute. Water move out of cell if it is kept in hypertonic solution, while water move inside the cell if it is kept in hypotonic solution. The water keeps moving across the membrane until the concentration outside and inside the cell become equal. If cell is placed in an an isotonic solution, the net flow of water is zero.
Impermeable membranes hinders the movement of substance through them. Membrane impermeable to water will not allow the movement of water through it.
to know more about osmolarity
https://brainly.com/question/13597129
#SJ4
while pipetting diiodoacetic acid, a few droplets landed onto my arm. i washed it off for 15 minutes and did not see any sign of a chemical burn on my skin. i should proceed to do the following: 1 point
If you washed it off for 15 minutes and did not see any sign of a chemical burn on your skin , you can: visit a doctor if you see any sign on your skin.
Steps to follow in case of acid dropped on skin:
Immediately run lukewarm water over the area for 30 minutes.Remove any jewelry and clothing from the afflicted region.Watch for symptoms to develop. After 20 to 30 minutes, if the burning feeling on your skin is still there, keep rinsing under a stream of clean water and call your doctor or the Poison Control Hotline.What is Diiodoacetic acid?
A disinfection by-product (DBP) created during the disinfection of water is Diiodoacetic acid. Asparagopsis taxiformis contains the natural substance diiodoacetic acid, according to accessible information.
Iodoacetic acid: What is it?
A byproduct of acetic acid is iodoacetic acid. Because it is an alkylating agent, like many alkyl halides, this substance is poisonous.
To learn more Iodoacetic acid click below-
https://brainly.com/question/22575818
#SPJ4
An aqueous solution contains two species, a and b. the absorbance at 300 nm is 0.372, and at 250 nm is 0.478. the molar absorptivities of a and b are:________
The absorbance at 300 nm is 0.372 and at 250 nm is 0.478. The molar absorptivities of A and B are as follows: A: ε300= 3.22x104 L mol-1cm-1 ε250= 4.05x104 L mol.
What is molarity?Molar concentration, also known as molarity, quantity concentration, or substance concentration, is a unit used to describe the amount of a substance in a solution expressed as a percentage of its volume. The number of moles per liter, denoted by the unit symbol mol/L or mol/dm3 in SI units, is the most often used unit denoting molarity in chemistry. One mol/L of a solution's concentration is referred to as one molar, or 1 M.
Because the volume of most solutions very minimally changes with temperature owing to thermal expansion, using molar concentration in thermodynamics is frequently not practical. Usually, incorporating temperature adjustment factors or utilizing a temperature-independent metric will fix this issue.
To learn more about molarity from the given link:
https://brainly.com/question/26873446
#SPJ4
classify each reactant and product in this reaction as an acid or base according to the brønsted theory. hf h2o↽−−⇀f− h3o
Bronsted-lowry theory does not define acid and bases particularly but they particularly tell how they react or act in the given chemical reaction.
Bronsted-Lowry theory are also known as proton theory of acids and bases.
From the given reaction, HF contribute a proton, in the form of an H+ atom, to water H2O, producing the fluoride F− and hydronium H3O+ ions. The reactant side of Bronsted-Lowry acid is :
Bronsted−Lowry acid: HF
On the other hand the Bronsted-Lowry base is
Bronsted−Lowry base : H2O
Meanwhile, the particle on the product side that same after the Bronsted-Lowry acid contribute a proton to the Bronsted-Lowry base is called a conjugate base (are able to take a proton) while the persist particles taking a proton is the conjugate acid (are able to contribute a proton). Hence,
Bronsted−Lowry acid : H3O + Bronsted−Lowry base : F−
To know more about Bronsted - Lowry Theory here :
https://brainly.com/question/27724955?referrer=searchResults
#SPJ4
Look at the image. The velocity between point A and point B is
m/s. Only use one decimal point. (3.0, 1.2, 0.9, etc.)
The velocity between point A and point B is 1.0 m/s
How to determine the velocity between point A and point B
What is velocity?
Velocity is simply defined as the rate of change of displacement with time. Mathematically, it can be expressed as:
Velocity = Change of displacement / time
From the question given above, the following data were obtained:
Displacement at A = 0 mDisplacement at B = 8 mChange of displacement = 8 - 0 = 8 mTime at A = 0 sTime at B = 8 sChange in time = 8 - 0 = 8 s Velocity =?The velocity between point A and point B can be obtained as follow:
Velocity = Change of displacement / time
Velocity = 8 / 8
Velocity = 1.0 m/s
Thus, the velocity between point A and point B is 1.0 m/s
Learn more about velocity:
https://brainly.com/question/3411682
#SPJ1
What state
of matter has a defined volume but undefined shape?