trials with which two sets of experimental conditions would allow an experimenter to determine the effect of increasing drop height upon the force experienced by the egg?

The wave itself, that is, the crests and troughs, will move along the direction of propagation, but the particles themselves will only move perpendicularly to it.

How does a transverse wave rope move?

A wave in which the displacement of the medium's particles is perpendicular to the direction of energy transfer is called a transverse wave. If a rope is stretched out horizontally and the end is vibrated back and forth vertically, a transverse wave can be produced in the rope.

Transverse wave propagation is only feasible via solids; it is not possible in liquids or gases. Only transverse waves can display the polarization phenomena. The plane of vibration or polarization is the location where all of the particle vibration in a medium occurs. Shaking the rope causes the rope's constituent parts to oscillate, which causes the wave to advance or retreat from the energy source. The rope moves at a straight angle—or perpendicular—to the direction that the wave moves.

To learn more about transverse waves use link below:

https://brainly.com/question/15531840

#SPJ1

The windings' current is 8.00 A. A location close to the solenoid's center has a magnetic field of 0.0111 T.

The magnetic field at a point near the center of a solenoid can be calculated using the following formula:

B = (μ₀xnxI) / L

Where:

B is the magnetic field

μ₀ is the permeability of free space, which is 4π x 10^(-7) Tm/A

n is the number of turns per unit length of the solenoid, in turns/m

I is the current flowing through the solenoid, in A

L, length of solenoid

Given the radius of the solenoid as 0.75 cm = 0.0075 m, and the length of the solenoid as 15.0 cm = 0.15 m, the cross-sectional area of the solenoid is:

π*(0.0075 m)² = 1.767 x 10^-5 m²

The number of turns per unit length of the solenoid can be calculated by dividing the total number of turns by the length of the solenoid:

600 turns / 0.15 m = 4000 turns/m

We can now substitute these values into the formula:

B = (4π x 10^(-7) Tm/A) * (4000 turns/m) * (8.00 A) / (0.15 m)

B = 0.0111 T

Therefore, the magnetic field at a point near the center of the solenoid is 0.0111 T.

It is worth noting that this result is valid only when the solenoid is long enough so that its ends do not affect the magnetic field inside. Also, the solenoid is considered as tightly wound and the radius of the solenoid much smaller than the length, so that the magnetic field inside the solenoid is uniform.

To know more about magnetic field please refer: https://brainly.com/question/23096032

#SPJ4

The particles leave a trail behind them as they move. The longer the trail, the faster that the particle is moving. During any up-and-down cycle of the particle, describe the speed. It moves with the greatest speed AND smallest speed when there is a change in the direction.

The speed of an object is described as the magnitude of the change of its position over time or the magnitude of the change of its position per unit of time;

Speed is  a scalar quantity.

The particle will move faster when there is a change in the direction on the movement of the particle.

Learn more about speed at: https://brainly.com/question/26046491

#SPJ1

The energy E must be supplied to the device is 1.8x10^3kJ when an ice-making machine inside a refrigerator operates in a Carnot cycle.

Given the temperature initially (Tl) = 0degrees Celsius = 273K

The final temperature (Tc) = 19.2degrees Celsius = 273 + 19.2 = 292.2K

Mass of liquid water (m) = 76.3kg

The water is converted to ice at 0 degrees Celsius

The heat of fusion for water to be Lf = 3.34*10^5 J/kg.

Let heat released from ice = Qc

Heat absorbed by water = Ql

We know that Ql = mLf = 76.3 x 3.34*10^5 = 2.54*10^4kJ

Then Qc/Ql = -Tc/Tl

Qc = - 254.842*10^5 (292.2/273)

Qc = -2.72x10^4kJ

The heat being lost to the hot reservoir is the cause of the negative sign.

We know that Ql = Qc + W where W is the work done

W = Qc - Ql = 2.54*10^4kJ - 2.72x10^4kJ

W = 1.8x10^3kJ

Hence the energy E that must be supplied to the device is 1.8x10^3kJ

To learn more about work click here https://brainly.com/question/18094932

#SPJ4

When the force applied on the ball causes it o accelerate into the field

goal, Positive work is done on the ball.

option B.

A work is said to be done when an applied force causes a displacement of an object.

Mathematically, the formula for work done is given as;

W = Fd

where;

Thus, when  a soccer player kicks a ball moving in a straight line

towards the field goal, causing it to accelerate into the field goal, the work done on the ball is a Positive work.

Learn more about positive work here: https://brainly.com/question/28104809

#SPJ1

The de Broglie wavelength of the electron is 2.212 x 10-11 m.

The de Broglie wavelength is a concept in quantum mechanics which states that all matter has a wave-like nature, and can thus be described as a wave.

(a) The de Broglie wavelength (λ) of a particle is given by the equation: λ = h/p, where h is Planck's constant (6.626 x 10-34 J.s) and p is the momentum of the particle.
The momentum of an electron with a 1000-V potential drop is given by the equation p = eV/c,
where e is the electron charge (1.602 x 10-19 C) and c is the speed of light (2.998 x 108 m/s).
Therefore, the de Broglie wavelength of the electron is:
λ = h/(eV/c) = (6.626 x 10-34 J.s) / (1.602 x 10-19 C x 1000 V/2.998 x 108 m/s) = 2.212 x 10-11 m.

(b) X-rays are produced when high-energy electrons strike a solid.
The wavelength of the x-ray is inversely proportional to the energy of the electron.
The energy of the electron is equal to the potential drop, i.e. 1000 eV. Therefore,
the wavelength of the x-ray produced is: λ = hc/eV = (6.626 x 10-34 J.s x 2.998 x 108 m/s)/(1.602 x 10-19 C x 1000 eV) = 1.246 x 10-10 m.

To learn more about Broglie wavelength
https://brainly.com/question/15330461
#SPJ4

The speed of a bicycle and its rider with a combined mass of 120 Kg is 50m/s.

                           momemtum of the car = mass × speed

                                                                 = 1200 × 5

                                                                 = 6000 kg m/s

       Mass of the bicycle = 120 kg.

                                 momentum of the bicycle = mass × speed

                                                  [tex]speed = \frac{6000}{120} \\\\ speed = 50 m/s[/tex]    

Therefore, the speed of the bicycle and its rider = 50 m/s      

To know more about momentum, visit: https://brainly.com/question/924303

#SPJ4

The savings in kWh from replacing the lights with a fluorescent bulb in one year is 496.4 kWh/yr.

Saving power = 60 w per night .

340 J/s ( 4h/d)(3600 sec/h) (365 d/yr)

( 1kWh/ 3.6 x 10 6 J)

= 496.4 kWh/yr

The capacity to perform work is a definition of energy. When energy is released, a body performs the same amount of work as it has energy stored. Scalar energy is a quantity. Joule is the SI unit for energy. 1 joule of energy is the amount of energy required to perform one joule of work.

According to the law of conservation of energy, energy can only be changed from one form to another rather than being created or destroyed. Unless energy is added from the outside, a system always has the same amount of energy.

Learn more about energy:

brainly.com/question/2003548

#SPJ4

The nearest point to a charged item or the position of a point charge has the greatest electric field. As the distance from the charge grows, the electric field's intensity diminishes.

A force field called an electric field is produced when one electric charge interacts with other charges in the field and either attracts or repels them. The volts per metre (V/m) unit of measurement for the electric field is the letter E. It may be seen as a charge producing lines of force. A positive test charge would be pushed towards the direction of the electric field at a specific spot if it were to be placed there. The strength of the electric field is highest when the lines are close together and weakest when they are far apart.

learn more about electric field  here:

https://brainly.com/question/8971780

#SPJ4

It is 1.93 metres away from the post.

for vertical motion

[tex]S= u t + \frac{1}{2} g t^{2}[/tex]

S = 0 +  [tex]\frac{1}{2} g t^{2}[/tex]

1.7 = [tex]\frac{1}{2} 9.8 t^{2}[/tex]

t = 0.589 sec

using law of  conservation of momentum, on the horizontal motion

[tex]m_{bullet} \ v_{bullet i} = m_{bullet} \ v_{bullet f} + m_{tin} \ v_{tin}[/tex]

[tex]0.0020 = 0.0020 \ 3 \ 720 + 0.11 \ v_{tin}[/tex]

[tex]v_{tin}[/tex] = 3.273 m/s

S = [tex]v_{tin} \ t[/tex]

   = 3.273 m/s * 0.589 s

   = 1.93 m

To know more about momentum

brainly.com/question/29113044

#SPJ4

Organ function is related to cell size which determines the function of tissues explains the relationship between cells, tissues and organs in the human body

Define a cell.

The smallest structural and operational unit of an organism is a cell. Although it is often tiny, macroscopic cells can also exist. Your body's basic building blocks are these cells, which are present in many different forms.

A tissue is made up of a collection of comparable cells and the connective tissue that binds them together to serve a common purpose. An organ is a collection of tissues found in an organism that cooperate to carry out a specific task. The lungs, kidneys, and stomach are a few examples. The bronchi, bronchioles, and alveoli all work together to assist the lungs exchange oxygen and carbon dioxide from the blood.

To learn more about cells use link below:

https://brainly.com/question/13920046

#SPJ1

When fired at 33 m/s, a bullet pierce a wood block by 7 cm. Find the rate of deceleration and the stopping time.

EXPLANATION: Due to its great velocity, a bullet discharged from a gun has a very high kinetic energy. The bullet's kinetic energy affects the object it impacts or strikes. The enormous kinetic energy the bullet possesses as a result of its speed causes it to pierce its target.

In addition to piercing tissue, bullets that enter a human body also break a bone and dislocate limbs. In addition to piercing tissue, bullets that enter a human body also break a bone and dislocate limbs. A colostomy life-long bag is possible in the event of an intestinal damage.

To know more about  pierce visit:

https://brainly.com/question/11391629

#SPJ4

Yes, a=f/m where a is the acceleration, f is the force, and m is the mass of an object,  a=0.2m/s^2

According to Newton's 2nd law of motion, According to this law, the rate of change of linear momentum of a body is directly proportional to the external force applied on the body, and this change takes place always in the direction of the force applied. In simple terms, it means that a larger force will change the momentum of an object more quickly as compared to a smaller force.

Mathematically, we can write

F∝ dp/dT

where p is the momentum

F∝ (mv-mu)/t₂-t₁

where v is the final velocity and u is the initial velocity

Now, F∝{m(v-u)}/(t₂-t₁)

         F∝ma                       [∵ a=(v-u)/t]

         F=kma

∴  when k=1

  F=ma

Now according to this question,

f=10,000 N    and     m=50,000kg

By applying the formula,

F=ma

10,000=50,000*a

∴ a= 10,000÷50,000

a=0.2  or 2×10⁻¹ m/s²

Read more about Newton's 2nd law:

https://brainly.in/question/48843211

The cable will be under 12.0 KN of tension when that person drops a coin. Then the acceleration of the coin relative to the cab is 0.00828 m/s^2.

To find the acceleration of the coin relative to the cab, we can use the equation for tension force:

Tension force = mass x acceleration

We are given the tension force (12.0 kN) and the combined mass of the cab and its occupant (1450 kg). Therefore, we can solve for acceleration:

12.0 kN = (1450 kg) x acceleration

acceleration = 12.0 kN / (1450 kg)

acceleration = 0.00828 m/s^2

So the acceleration of the coin relative to the cab is 0.00828 m/s^2

It is worth noting that the coin will fall with respect to the elevator with an acceleration of 9.8 m/s^2 (upwards) but relative to the elevator, the coin is accelerating downwards with 9.8 m/s^2 + 0.00828 m/s^2 = 9.80828 m/s^2.

To know more about acceleration please refer: https://brainly.com/question/12550364

#SPJ4

Yes the given statement is true. Negative acceleration of an object shows that the object is slowing down.

The rate of change of velocity with respect to time is nothing but the acceleration. It is considered as a vector quantity that has both magnitude and direction. Its SI unit is m/s², and its dimension formula is [LT⁻²]. Mathematically

Acceleration, a = (v₂ - v₁)/Δt

Where v₂ is the final velocity after time Δt, and v₁ is the initial velocity. If the acceleration is negative it means final velocity is smaller than initial velocity. It means object is slowing down. Negative acceleration is also called deceleration. Hence the given statement is true.

--The given question is incomplete, the complete question is:

"Is it true that If the acceleration of an object is negative the object must be slowing down?"--

To know more about acceleration, here

https://brainly.com/question/12550364

#SPJ4

Answer:

Explanation: It's R/n

In the transverse wave, point D represents the trough of the wave.

option D.

A wave two important points point, one curves upwards while the other curves downwards.

The maximum value of upward displacement within a cycle of a wave is known as crest. So the crest is a point on a surface wave where the displacement of the medium is at a maximum.

The maximum value of downward displacement within a cycle of a wave is known as trough.

Thus, from the graph, point A represents crest of the wave while point D represents trough of the wave.

Learn more about trough here: https://brainly.com/question/2116559

#SPJ1

For the investigation and analysis of micro- and nanoparticle imaging characterisation of solid objects, scanning electron microscopes (SEM) are among the most frequently used instrumentation.

To learn more about electron microscope refer

https://brainly.com/question/14149959

#SPJ4

Answer:

30N

Explanation:

As we know that ,

Force = mass * acceleration

so substitute the respective values,

F = 15kg * 2m/s²

F = 30N

and we are done!

When an object reaches terminal velocity its acceleration becomes zero.

Terminal velocity is also called constant velocity. When there is no acceleration in the moving object. We can take the example of sedimentation.

Sedimentation is the process of settling down the soil particles at the bottom of the water. When soil particles comes down in water there are three forces which act on the particles. Downward force is weight of the particle. Upward force buoyant force of the water, and drag force. When upward forces become equal to the downward force then particles begins to settle down with a constant velocity. which is called terminal velocity.  

To know more about acceleration, here

https://brainly.com/question/12550364

#SPJ4

Allow two positive charges. Cuban and American two were distantly separated B. Cubans also use force against one another. This is also cute. Thus, the force will be equal to Q1 + Q2 + R^2.

A characteristic of matter that affects how much force an object experiences when exposed to an electromagnetic field. A substance's charge might be positive, negative, or neutral. Total electric charge is conserved and cannot be created or destroyed, much as energy and matter.

Coulomb's constant, often known as the electric force constant, has a value of

K=   [tex]\begin{equation*} 9\times10^9 \end{equation*}[/tex]  [tex]\begin{equation*} \frac{Nm^2}{C^2} \end{equation*}[/tex]

Electrostatic force formula

[tex]\begin{equation*} \left|F_{E} \right|=K\left|\frac{q_1q_2}{r^2}\right| \end{equation*}[/tex]      

[tex]F_{E}[/tex] is a electric force [tex]q_{1}[/tex]  and [tex]q_{2}[/tex] is electric charge in coulomb K is constant,  r  is the distance between the charges  

The magnitude of the electric force between [tex]q_{1}[/tex] and [tex]q_{2}[/tex]

Directly proportional to the size of the charges and inversely proportional to the square of the distance between them is the formula q, start subscript, 2, end subscript. The name of this equation is Coulomb's Law.

Comparing electric force and gravitational force with Newton's law of gravitation:

[tex]\begin{equation*} \left|F_E\right|=K\left|\frac{q_1q_2}{r^2}\right| \end{equation*}[/tex]

[tex]\begin{equation*} \left|F_G\right|=K\left|\frac{q_1q_2}{r^2}\right| \end{equation*}[/tex]

Similar to how gravitational force grows in strength with mass, electric force grows in strength with the size of the charges. Along the fictitious line connecting the items, both forces operate. The inverse-square law states that both forces are inversely proportional to the square of the distance between the objects. Additionally, both forces have constants of proportionality.

The relative intensities of gravitational and electric forces, which are determined by the ratio of K to G, are a disparity between them. The gravitational force between an electron and a proton is much smaller than the electrostatic force between them by several orders of magnitude.

To know more about gravitational force :

https://brainly.com/question/24783651

#SPJ4

The reading on the thermometer after more minutes will depend on the rate at which the temperature of the room and the outdoors change.

A thermometer is a device used for measuring temperature. It consists of a hollow tube made of glass that is filled with a liquid, such as mercury or alcohol, and a scale. When the temperature changes, the liquid expands or contracts, causing the scale to indicate the temperature.

If the temperature of the room and the outdoors remain relatively constant, then the reading on the thermometer after more minutes would likely be the same as the reading after one minute. However, if the temperature of the room or the outdoors changes faster than the other, then the reading on the thermometer after more minutes will be different from the reading after one minute.

To learn more about thermometer
https://brainly.com/question/29503787
#SPJ4

The spacecraft's acceleration can be found using the equation: a = (v-u)/t = 4.50 x 10^2 m / 4.0 s = 11.25 m/s^2.

Uniformly accelerating motion refers to an object that is moving at a constant rate of acceleration. This means that the velocity of the object is changing at a constant rate, but the acceleration remains the same throughout the motion. An example of this type of motion is an object that is accelerating from rest at a constant rate. The motion of the object can be described mathematically by the equations of motion, such as distance = initial velocity * time + 1/2 * acceleration * time^2. The graph of uniformly accelerating motion is a parabola, with velocity on the y-axis and time on the x-axis. This type of motion is different from non-uniform acceleration, where the acceleration changes during the motion.

To know more about Acceleration visit: https://brainly.com/question/3046924

#SPJ4

A spacecraft that is uniformly accelerating straight upward from rest reaches an altitude of 4. 50 X 102 m [up) with acceleration of 11.25 m/s².

The spacecraft's acceleration can be found using the equation:

                      a = (v-u)/t

             = 4.50 x 10² m / 4.0 s

                  = 11.25 m/s².

Uniformly accelerating motion refers to an object that is moving at a constant rate of acceleration. This means that the velocity of the object is changing at a constant rate, but the acceleration remains the same throughout the motion. An example of this type of motion is an object that is accelerating from rest at a constant rate.

The motion of the object can be described mathematically by the equations of motion, such as distance = initial velocity × time + 1/2 * acceleration × time². The graph of uniformly accelerating motion is a parabola, with velocity on the y-axis and time on the x-axis. This type of motion is different from non-uniform acceleration, where the acceleration changes during the motion.

Learn more about Acceleration :

brainly.com/question/3046924

#SPJ4

The average force acting on a given area is 21.98 Pa.

A force is an influence in physics that can change the motion of an object. A force can cause a mass object to change its velocity, or accelerate. Intuitively, force can be described as a push or a pull. A force is a vector quantity because it has both magnitude and direction.

Here,

Force = Mass X acceleration = 0.004kg x 9.8. This is when the hailstone is not inclined at an angle.

When the hailstone is inclined at an angle of 45, then the component of force along the glass window will be F =0.004kg x 9.8 x sin20= 0.005kg x 9.8 x 0.707= 0.0357N.

Therefore, total force for the 500 hailstones would be 500x0.0357N=17.85N

This force is acting on an area equal to 0.788m2

Pressure = Force per unit area = 17.32N/0.788m2 = 21.98Pa

The force is acting on an area known as average force is 21.98 Pa.

To know more about force,

https://brainly.com/question/29044739

#SPJ4

Period of the pendulum on Mars is 1.84 seconds (rounded to 2 decimal places).

Period of any pendulum is the distance from the pivot to center of oscillation.

The period of a pendulum, T:

T = 2 * pi * sqrt(L/g);  L is length of pendulum and g is acceleration due to gravity.

On Earth, period of the pendulum is 1.04 seconds. To find the period on Mars, we can use fact that the acceleration due to gravity is 0.37 times that on Earth:

g_mars = 0.37 * g_earth

T_mars = 2 * pi * sqrt(L/g_mars)

Now we know ; T_mars = T_earth * sqrt(g_earth/g_mars)

T_mars = 1.04 * sqrt(1/0.37) = 1.04 * 1.76 = 1.8368 s

Therefore, the period of the pendulum on Mars is 1.84 seconds (rounded to 2 decimal places).

To know more about period of pendulum, refer

https://brainly.com/question/26524032

#SPJ4

As we do not have the mass we can not give you the gravitational field strength, but you can find it out by measuring the mass of the lunar module and use the formula above.

Generally, To calculate the gravitational field strength on the Moon, we need to divide the weight of the lunar module (in newtons) by its mass (in kilograms).

We do not have the mass of the lunar module, however we know that the weight is equal to the force of gravity acting on it. The weight is force, which is measured in newtons.

Weight = Mass * gravitational field strength (g)

g = Weight / Mass

Read more about the gravitational field

https://brainly.com/question/12324569

#SPJ1

CQ not found

Answer: approximately the same time of day

Explanation:

The mass and magnitude of the second particle are calculated below.

The initial velocity of an object is its velocity prior to the effect of acceleration, which causes the change. The velocity will be the final velocity after accelerating the object for some time. When a particle moves at a constant speed, it can be accelerated. When a point object moves in a horizontal circular path at a constant speed, the direction of its velocity vector changes over time. It means that in a uniform circular motion, the object's velocity vector changes over time.

Distance between the charges, r = 3.2 × [tex]10^{-3}[/tex]m

initial acceleration of first particle, [tex]a_{1}[/tex] = 7m / [tex]s^{2}[/tex]

Initial acceleration of second particle, [tex]a_{2}[/tex] = 9.0m / [tex]s^{2}[/tex]

Mass of first particle, [tex]m_{1}[/tex] = 6.3 × [tex]10^{-7}[/tex]kg

Mas of second particle, m₂ = ?

a) Since, [tex]F_{1}=F_{2}[/tex]

∴ [tex]m_{1}a_{1} = m_{2}a_{2}[/tex]

mass of second particle-[tex]m_{2}[/tex] =[tex]\frac{m_{1}\times a_{1}}{a_{2}}[/tex]

= [tex]\frac{6.3\times10^{-7}\times7.0}{9.0}[/tex]

=4.9 × [tex]10^{-7}[/tex]Kg

b)As, [tex]F_{1} = F_{2}[/tex]

       = [tex]\frac{q_{1}q_{2}}{4\pi E_{0}r^{2}}[/tex] = [tex]m_{1}a_{1}[/tex]

       = 6.3 × [tex]10^{-7} \times[/tex] 7.0

       = 44.1 × [tex]10^{-7}[/tex]

∴ q = 7.1 × [tex]10^{-11}[/tex]C.

Learn more about mass:

brainly.com/question/15959704

#SPJ4

The time it takes for the sandbag to reach the ground would depend on the height from which it was released. The value is calculated to be t = √(2 s/(3g/4)).

To find out how long it takes for the sandbag to reach the ground, we can use the equation of motion for a vertically falling object under the influence of gravity:

s = v₀ t + (1/2) g t²

where s is the distance fallen, v₀ is the initial velocity (which is 0 m/s for the sandbag), t is the time elapsed, and g is the acceleration due to gravity (approximately 9.8 m/s²).

We know that the sandbag is being released from the balloon and has an upward acceleration of g/4. So, the equation of motion becomes

s = v₀ t + (1/2)(g - g/4) t²

We also know that s is the distance fallen to the ground, which we can take as the final distance.

Now solving the equation for t, t = √(2 s/(g - g/4))

It is given that the magnitude of the upward acceleration is g/4, so (g - g/4) = 3g/4, so the final equation becomes t = √(2 s/(3g/4))

To know more about time:

https://brainly.com/question/30313443

#SPJ4