Given statement: The rule of thumb for estimating the time of completion is 1.5 times what you originally think it will be.
Given statement is True.
The reason for this rule of thumb is that tasks often take longer than initially estimated due to unforeseen challenges, dependencies, and other factors that can cause delays.
By estimating the time of completion as 1.5 times the original estimate, you are accounting for these potential delays and allowing for a more realistic timeline.
This rule of thumb is not a hard and fast rule, and there will be cases where tasks take less or more time than 1.5 times the original estimate. However, it can be a helpful guideline for project planning and resource allocation, as it helps to ensure that sufficient time and resources are allocated to complete tasks within a realistic timeframe.
For similar question on estimating.
https://brainly.com/question/597381
#SPJ11
A triangle has two legs measuring 21 cm and 20 cm. Which of the following leg measurement will make a right triangle?
The leg measurement will make a right triangle is 21 cm.
What is hypotenous?The longest side of a right-angled triangle, i.e. the side opposite the right angle, is called the hypotenuse in geometry.
Pythagorean theorem :
If p be the length of the hypotenuse of a right-angled triangle, q and r be the lengths of the other two sides, then
p² = q² + r²
The lengths of the other two sides of the given right-angled triangle are 20 cm and 21 cm. Put these values in the above theorem to get the desired result.
Now, p² = (20)² + (21)²
= 400 + 441 = 841
i.e. p = √(841) = 29
Therefore the length of the hypotenuse is 29 cm. The right angle traingle is 21 cm.
Learn more about hypotenuse, here:
https://brainly.com/question/28946097
#SPJ1
how many intervals (or 'bins' or 'classes') should be chosen when creating a histogram? question 1 options: most often, about 8-10. eleven. it can vary - it really depends on the distribution of the variable. a minimum of 5.
"It can vary - it really depends on the distribution of the variable."
The number of intervals, or bins, to choose when creating a histogram can vary depending on the distribution of the variable.
Most often, about 8-10 intervals are used, but there is no set rule. It is generally recommended to have at least 5 intervals, but if the data is highly skewed or has outliers, more intervals may be needed to accurately represent the distribution.
Ultimately, the goal is to choose a number of intervals that provides a clear visual representation of the data without oversimplifying or overcomplicating the histogram.
The number of intervals or bins to be chosen when creating a histogram can vary and it really depends on the distribution of the variable.
While most often, about 8-10 bins are used, there is no hard and fast rule for the number of bins to be used in a histogram.
In general, the number of bins should be large enough to display the shape of the distribution clearly, but not so large that it obscures important features of the distribution or leads to overfitting.
A minimum of 5 bins is recommended to display the basic shape of the distribution, but more bins may be necessary for complex or multi-modal distributions.
Depending on the distribution of the variable, a histogram's number of intervals or bins can be altered.
There is no established guideline, however 8–10 intervals are typically utilized.
A minimum of five intervals are often advised, however if the data is extremely skewed or contains outliers, more intervals could be required to correctly depict the distribution.
For similar questions on variable.
https://brainly.com/question/27894163
#SPJ11
WILL MARK AS BRAINLEIST!!
Question in picture!!
Note: The graph above represents both functions “f” and “g” but is intentionally left unlabeled
Answer:
f(x) is the blue graph, g(x) is the red graph.
x^2 - 3x + 17 - (2x^2 - 3x + 1) = 16 - x^2
16 - x^2 = 0 when x = -4, 4
So the area between these two graphs is (using the TI-83 graphing calculator):
fnInt (16 - x^2, x, -4, 4) = 85 1/3
which of the following null hypothesis statistical tests require calculating degrees of freedom? group of answer choices all of the above two-sample t-test chi-squared one-sample t-test
The two null hypothesis that are correct answer are two-sample t-test and one-sample t-test.
Among the group of answer choices provided, the tests that require calculating degrees of freedom are the two-sample t-test and the one-sample t-test. Both of these tests belong to the t-test family and involve using degrees of freedom to determine the critical t-value.
In summary:
- Null hypothesis: The assumption that there is no significant difference between the sample and population or between two samples.
- T-test: A statistical test used to determine if there is a significant difference between the means of two groups or between a sample and population mean.
- Degrees of freedom: A value used in statistical tests that represents the number of independent values in a data set, which can affect the outcome of the test.
So answer is: two-sample t-test and one-sample t-test.
Learn more about null hypothesis here:
https://brainly.com/question/28920252
#SPJ11
The null hypothesis statistical tests that require calculating degrees of freedom are the two-sample t-test and the one-
sample t-test. The degrees of freedom are necessary to calculate the t-value for these tests. The chi-squared test also
requires degrees of freedom, but it is not a test for a null hypothesis.
The correct answer is: all of the above.
All these tests require calculating degrees of freedom:
1. Two-sample t-test:
Degrees of freedom are calculated using the formula (n1 + n2) - 2, where n1 and n2 are the sample sizes of the two
groups being compared.
2. Chi-squared test:
Degrees of freedom are calculated using the formula (rows - 1) * (columns - 1), where rows and columns represent the
number of categories in the data.
3. One-sample t-test:
Degrees of freedom are calculated using the formula n - 1, where n is the sample size.
The null hypothesis statistical tests that require calculating degrees of freedom are the two-sample t-test and the one-
sample t-test. The degrees of freedom are necessary to calculate the t-value for these tests. The chi-squared test also
requires degrees of freedom, but it is not a test for a null hypothesis.
for such more question on null hypothesis
https://brainly.com/question/4436370
#SPJ11
2. Which sequence of transformations takes the graph of y = k(x) to the graph of
y=-k(x + 1)?
A. Translate 1 to the right, reflect over the x-axis, then scale vertically by a factor of 1/2
B. Translate 1 to the left, scale vertically by 1/2 , then reflect over the y-axis.
C. Translate left by 1/2, then translate up 1.
D. Scale vertically by 1/2, reflect over the x-axis, then translate up 1.
The correct answer is option B. Translate 1 to the left, scale vertically by 1/2, then reflect over the y-axis.
What does term "transformation of a graph" means?The process of modifying the shape, location, or features of a graph is often referred to as graph transformation. Graphs are visual representations of mathematical functions or data point connections, often represented on a coordinate plane.
Translations, reflections, rotations, dilations, and other changes to the look of a graph are examples of graph transformations.
For the given problem, Transformation to get the desired result can be carried out as:
Translate '1' to the left: The transformation "x + 1" in "-k(x + 1)" shifts the graph horizontally to the left by 1 unit.Scale vertically by '1/2' : The 1/2 factor in "-k(x + 1)" vertically scales the graph, compressing it vertically.Reflect over the y-axis: The minus sign before "k" in "-k(x + 1)" reflects the graph over the y-axis, flipping it horizontally.Hence, to convert the graph of "y = k(x)" to the graph of "y = -k(x + 1)," the correct sequence of transformations is to translate 1 unit to the left, scale vertically by 1/2, and then reflect across the y-axis, which is option B.
Learn more about Graph Transformation here:
https://brainly.com/question/10059147
#SPJ1
compute the residuals. (round your answers to two decimal places.) xi yi residuals 6 6 11 7 15 12 18 20 20 30 (c) develop a plot of the residuals against the independent variable x. do the assumptions about the error terms seem to be satisfied?
The estimated regression equation for the given data is y = -30.7 + 3.409x
To develop an estimated regression equation for the given data, we need to use the method of least squares.
The formula for the slope of the regression line is given by:
b = ∑(xi - x)(yi - y) / ∑(xi - x)²
where xi and yi are the individual values of the two variables, x and y are their respective means.
The formula for the intercept of the regression line is given by:
a = y - b × x
where a is the intercept and b is the slope.
Using the given data, we can calculate the values of x, y, b, and a as follows
x = (6 + 11 + 15 + 18 + 20) / 5 = 14
y = (7 + 9 + 12 + 21 + 30) / 5 = 15.8
∑(xi - x)(yi - y) = (6 - 14)(7 - 15.8) + (11 - 14)(9 - 15.8) + (15 - 14)(12 - 15.8) + (18 - 14)(21 - 15.8) + (20 - 14)(30 - 15.8) = 306.8
∑(xi - x)² = (6 - 14)² + (11 - 14)² + (15 - 14)² + (18 - 14)² + (20 - 14)² = 90
b = ∑(xi - x)(yi - y) / ∑(xi - x)² = 306.8 / 90 = 3.409
a = y - b × x = 15.8 - 3.409 × 14 = -30.7
Learn more about regression equation here
brainly.com/question/14184702
#SPJ4
The given question is incomplete, the complete question is:
Given are data for two variables, x and y. Develop an estimated regression equation for these data.
brainlist
show all steps nd i will make u brainlist
Step-by-step explanation:
Again, using similar triangle ratios
7.2 m is to 2.4 m
as AB is to 12.0 m
7.2 / 2.4 = AB/12.0 Multiply both sides of the equation by 12
12 * 7.2 / 2.4 = AB = 36.0 meters
hat is the maximum speed of a point on the outside of the wheel, 15 cm from the axle?
It depends on the rotational speed of the wheel. To calculate this speed, we need to know the angular velocity of the wheel.
The maximum speed of a point on the outside of the wheel, 15 cm from the axle, if we assume that the wheel is rotating at a constant rate, we can use the formula v = rω, where v is the speed of the point on the outside of the wheel, r is the radius of the wheel (15 cm in this case), and ω is the angular velocity of the wheel. Therefore, the maximum speed of a point on the outside of the wheel would be directly proportional to the angular velocity of the wheel.
The formula to calculate the maximum linear speed (v) is:
v = ω × r
where v is the linear speed, ω is the angular velocity in radians per second, and r is the distance from the axle (15 cm, or 0.15 meters in this case).
Once you have the angular velocity (ω) of the wheel, you can plug it into the formula and find the maximum speed of a point on the outside of the wheel.
Learn more about rotational speed here: brainly.com/question/17025846
#SPJ11
which statement is correct? group of answer choices assessment is only one part of the overall testing process. testing is only one part of the overall assessment process. testing integrates test information with information from other sources.
Testing is only one part of the overall assessment process.
What is evaluation in education?
Assessment is an ongoing process of gathering evidence of what each student actually knows, understands, and can do. A comprehensive evaluation approach includes a combination of formal and informal evaluation (formative, preliminary, and summative).
What is an assessment? Also what does it mean?
At the course level, assessments provide important data on the breadth and depth of student learning. Evaluation is more than scoring. It's about measuring student learning progress. Assessment is therefore defined as “the process of data gathering to better understand the strengths and weaknesses of a student's learning”.
Learn more about assessment
brainly.com/question/28046286
#SPJ1
in a(n) , the scale questions are divided into two parts equally and the resulting scores of both parts are correlated against one another.
The main topic is the split-half reliability test used in psychological research to assess the internal consistency of a scale.
How to test the psychological research?In psychological research, reliability is a crucial aspect of measuring constructs or attributes. One commonly used method for assessing the reliability of a scale is the split-half reliability test.
In this test, the scale questions are divided into two parts equally, and the resulting scores of both parts are correlated against one another.
For example, if a scale had 20 items, the items could be randomly split into two groups of 10 items each.
Scores are then calculated for each group, and the scores are correlated with each other to determine the degree of consistency between the two halves.
The correlation coefficient obtained from this analysis provides an estimate of the internal consistency of the scale.
A high correlation coefficient indicates a high level of internal consistency, indicating that the two halves of the scale are measuring the same construct or attribute.
Conversely, a low correlation coefficient suggests that the two halves of the scale are not measuring the same construct or attribute, and the scale may need to be revised or abandoned.
Overall, the split-half reliability test provides a quick and efficient method for evaluating the reliability of a scale.
However, it is important to note that this method does have some limitations, such as the possibility of unequal difficulty or discrimination of the items in each half of the scale.
Therefore, researchers often use other methods, such as Cronbach's alpha, in conjunction with the split-half reliability test to provide a more comprehensive assessment of the reliability of a scale
Learn more about reliability test
brainly.com/question/27873337
#SPJ11
Hello solve this, what is 9 x 5/7
Answer: 6 3/7
Step-by-step explanation:
9/1 x 5/7
If we multiply the numerators and denominators, we get 45/7 or 6 3/7 as a mixed number.
Answer:
[tex]\frac{45}{7}[/tex] or 6.4285
Step-by-step explanation:
First, multiply 9 and 5, which gives you 45.
9(5)=45
Then, divide 45 by 7.
45/7=6.4285
That gives you [tex]\frac{45}{7}[/tex] or 6.4285
Hope this helps!
which of the following is a correct statement regarding the null hypothesis? the null hypothesis is sometimes called the alternative hypothesis. the null hypothesis is the one the researcher cares the most about. the null hypothesis claims the opposite of what the researcher believes. the null hypothesis is usually more accurate than the research hypothesis.
The correct statement regarding the null hypothesis is: the null hypothesis claims the opposite of what the researcher believes.
The null hypothesis is the claim that no relationship exists between two sets of data or variables being analyzed. The
null hypothesis is that any experimentally observed difference is due to chance alone, and an underlying causative
relationship does not exist, hence the term "null".
In research, the null hypothesis is a statement of no effect or no relationship between variables, while the alternative
hypothesis represents the effect or relationship the researcher is interested in demonstrating.
The purpose of statistical testing is to determine whether there is enough evidence to reject the null hypothesis in
favor of the alternative hypothesis.
for such more question on null hypothesis
https://brainly.com/question/25263462
#SPJ11
rylie is a newly hired cybersecurity expert for a government agency. rylie used to work in the private sector. she has discovered that, whereas private sector companies often had confusing hierarchies for data classification, the government's classifications are well known and standardized. as part of her training, she is researching data that requires special authorization beyond normal classification. what is this type of data called? group of answer choices
Compartmentalized is the type of data that is discussed in the problem researched by an employee rylie who is a newly hired cybersecurity expert for a government agency and has working experience in the private sector.
Data classification is the way of organizing data into different categories that make it easy to retrieve, sort and store for future use. In simple words, compartmentalization means to separate into isolated compartments or categories. In data language, A nonhierarchical grouping of information used to control access to data more finely than with hierarchical security classification alone is called Compartmentalization. Now, we have a rylie who is a newly hired cybersecurity expert for a government agency. She has working experience in the private sector. On basis of her experience she has discovered that, the private sector companies often had confusing hierarchies for data classification as compared to the government's classifications which are well known and standardized. During her training, she is researching data that requires special authorization beyond normal classification. The data type that she researched and that is authorization beyond normal classification is called compartmentalized data.
For more information about data classification, visit :
https://brainly.com/question/30580761
#SPJ4
A helicopter hovering above a command post shines a spotlight on an object on the ground 250 feet away from the command post as shown in the diagram how far is the object from the helicopter to the nearest foot
The distance of the object from the helicopter is 698 ft.
What is distance?Distance is the length between two points.
To calculate how far the object is above the helicopter, we use the formula below.
Formula:
Sin∅ = O/H..................... Equation 1Where:
∅ = AngleO = OppositeH = Hypotenus = Distance of the object from the HelicopterFrom the question,
Given:
O = 250 ft∅ = 21°Substitute these values into equation 1 and solve for H
H = 250/Sin21°H = 697.61 ftH ≈ 698 ftHence, the distance is 698 ft.
Learn more about distance here: https://brainly.com/question/26046491
#SPJ1
A bottle of water that is 80°F is placed in a cooler full of ice. The temperature of the water decreases by 0. 5°F every minute. What is the temperature of the water, in degrees Fahrenheit, after 5 1/2
minutes? Express your answer as a decimal
After 5 and a half minutes, the temperature of the water will be 77°F.
In this scenario, we are given that the initial temperature of the water is 80°F. We also know that the temperature of the water decreases by 0.5°F every minute. We want to find out what the temperature of the water will be after 5 and a half minutes.
To solve this problem, we need to use a bit of math. We know that the temperature of the water is decreasing by 0.5°F every minute. So after 1 minute, the temperature of the water will be 80°F - 0.5°F = 79.5°F. After 2 minutes, the temperature will be 79.5°F - 0.5°F = 79°F. We can continue this pattern to find the temperature after 5 and a half minutes.
After 5 minutes, the temperature of the water will be 80°F - (0.5°F x 5) = 77.5°F. And after another half minute (or 0.5 minutes), the temperature will decrease by another 0.5°F, so the temperature will be 77.5°F - 0.5°F = 77°F.
To know more about temperature here
https://brainly.com/question/11464844
#SPJ4
what is the 4th term/number of (a+b)^9, pascal’s triangle?
Step-by-step explanation:
hope this will help you Thanks
help me please like right now as soon as possible write the answer in terms of pi and round the answer to the nearest hundredths place I will give branliest
Thus, the total surface area of cylinder is found to be 480π sq. cm.
Explain about the surface area of cylinder:A cylinder's surface area is made up of its two congruent, parallel circular sides added together with its curved surface area. You must determine the Base Area (B) and Curved Surface Area in order to determine the surface area of a cylinder (CSA).
As a result, the base area multiplied by two and the area of a curved surface add up to the surface area or total surface of a cylinder.
Given data:
radius r = 8 cm
Height h = 22 cm
Total surface area of cylinder = 2*area of circle + area of curved cylinder
TSA = 2πr² + 2πrh
TSA = 2π(8)² + 2π(8)(22)
TSA = 2π(64) + 2π(176)
TSA = 128π + 352π
TSA = 480π sq. cm.
Thus, the total surface area of cylinder is found to be 480π sq. cm.
Know more about the surface area of cylinder:
https://brainly.com/question/27440983
#SPJ1
Complete question-
Find the surface area of the cylinder with radius of 8 cm and height of 22 cm. write the answer in terms of pi and round the answer to the nearest hundredths place.
Show that cosh2x−sinh2x=1 � � � ℎ 2 � − � � � ℎ 2 � = 1 Differentiate with respect to x � e3xx2+1 � 3 � � 2 + 1 y=secx � = sec � y=tanx2 � = tan � 2 Differentiate with respect to x � y=ln(x+sinx) � = ln ( � + sin � ) y=cosxx2 � = cos � � 2 Find dydx � � � � given siny+x2y3−cosx=2y sin � + � 2 � 3 − cos � = 2 � Differentiate from first principles y=cosx � = cos � x3+2x2+3x+4 � 3 + 2 � 2 + 3 � + 4 Find d2ydx2 � 2 � � � 2 Given 3x3−6x2+2x−1 3 � 3 − 6 � 2 + 2 � − 1
We can conclude that cosh2x−sinh2x=1.
What is equation?An equation is a mathematical statement that states that two expressions are equal. It is typically written as a comparison between two expressions and consists of an equal sign (=). Equations are used to solve mathematical problems, to understand the relationships between different quantities, and to describe the behavior of a physical system. In addition, equations are used to calculate various quantities, such as the area of a circle or the speed of an object.
To show that cosh2x−sinh2x=1, we can use the identities for cosh2x and sinh2x. The identity for cosh2x is cosh2x=2cosh2x−1 and the identity for sinh2x is sinh2x=2sinh2x−1.
Substituting these identities into the equation cosh2x−sinh2x=1 yields 2cosh2x−1−2sinh2x−1=1. Simplifying this equation yields cosh2x−sinh2x=1, as required. Thus, we can conclude that cosh2x−sinh2x=1.
To know more about equation click-
http://brainly.com/question/2972832
#SPJ1
Simplifying this equation yields [tex]\cosh^2x-sinh^2x=1[/tex], as required. Thus, we can conclude that [tex]\cosh^2x-sinh^2x=1[/tex].
What is equation?An equation is a mathematical statement that states that two expressions are equal. It is typically written as a comparison between two expressions and consists of an equal sign (=). Equations are used to solve mathematical problems, to understand the relationships between different quantities, and to describe the behavior of a physical system. In addition, equations are used to calculate various quantities, such as the area of a circle or the speed of an object.
We will show that [tex]\cosh^2x-sinh^2x=1[/tex].
Let us consider the expression [tex]\cosh^2x-sinh^2x.[/tex]
Then, [tex]\cosh^2x=(e^2x+e^{-2}x)/2[/tex] and [tex]sinh^2x=(e^2x+e^{-2}x)/2[/tex]
Substituting, we get [tex]\cosh^2x -\sinh^2x=(e^2x+e^{-2}x)/2\ -(e^2x+e^{-2}x)/2[/tex]
Simplifying, we have [tex]\cosh^2x -\sinh^2x=e^2x+e^{-2}x-e^2x+e^{-2}x[/tex]
[tex]=2e^{-2}x\\\\=2(e^{-2}x)\\\\=2[/tex]
Hence, [tex]cosh^2x-sinh^2x=1[/tex]
Therefore, we have shown that [tex]cosh^2x-sinh^2x=1[/tex]
To know more about equation click-
brainly.com/question/2972832
#SPJ1
The correct form of question is Show that cosh2x−sinh2x=1 .
Quilt squares are cut on the diagonal to form triangular quilt pieces. The hypotenuse of the resulting triangles is 20 inches long. What is the side length of each piece?
1. 10√2
2. 20√2
3. 10√3
4. 20√3
Answer:
The correct answer is:
10√2
Explanation:
In a right triangle, the hypotenuse is the side opposite the right angle and is also the longest side. The other two sides are called the legs.
In this problem, the hypotenuse of the resulting triangles is given as 20 inches. Since the quilt squares are cut on the diagonal to form triangular quilt pieces, the hypotenuse of each triangle is formed by the diagonal cut of a square.
Let's denote the side length of each square as "s" inches.
According to the Pythagorean Theorem, which relates the sides of a right triangle, the square of the length of the hypotenuse is equal to the sum of the squares of the lengths of the two legs.
In this case, the hypotenuse is 20 inches, so we have:
20^2 = s^2 + s^2 (since the two legs of the right triangle are the sides of the square)
400 = 2s^2
Dividing both sides by 2, we get:
200 = s^2
Taking the square root of both sides, we get:
s = √200
Since we are looking for the side length of each piece in simplified radical form, we can further simplify √200 as follows:
√200 = √(100 x 2) = 10√2
So, the side length of each quilt piece is 10√
The side length of each piece of the triangular pieces of quilt cut from squares will be 10√2 inches.
This is a simple mathematics problem that can be solved using the Pythagoras theorem. This theorem states that in a right-angled triangle, the square root of the sum of the two perpendicular sides (p,b) is equal to the longest side, called the hypotenuse (h).
[tex]h = \sqrt{p^2 + b^2}[/tex]
Since the triangle pieces have been cut from a square, they will be right-angled triangles, and the two perpendicular sides will be equal, i.e., p = b.
20 = √2p² (since p and b are equal, b can be taken as p)
On squaring both sides,
400 = 2p²
p² = 400/2
p² = 200
p = √200
p = 10√2 = b
To know more about Pythagoras theorem,
https://brainly.com/question/28981380
A $2 coin with a diameter of 25. 75 mm. How many turns does such a piece make if you roll it on the edge for 1. 34 m?
The coin makes approximately 16.53 turns when rolled on its edge for 1.34 m.
How to find the number of turns the coin makes?The circumference of the coin can be calculated as follows to determine the number of turns it makes:
C = πd
where C is the circumference, d is the diameter, and π is the mathematical constant pi (approximately equal to 3.14159).
So, for the given $2 coin with a diameter of 25.75 mm, the circumference is:
C = πd = 3.14159 x 25.75 mm ≈ 80.926 mm
Divide the distance traveled by the coin's circumference to determine the number of turns it makes when rolled on its edge for 1.34 meter:
Number of turns = distance traveled / circumference of the coin
Number of turns = 1.34 m / 0.080926 m
Number of turns ≈ 16.53
Therefore, the coin makes approximately 16.53 turns when rolled on its edge for 1.34 m.
know more about circumference visit :
https://brainly.com/question/28757341
#SPJ1
a kite flying in the air has a 94- string attached to it, and the string is pulled taut. the angle of elevation of the kite is . find the height of the kite. round your answer to the nearest tenth.
The height of the kite is approximately 68.4 ft.
To solve the problem, we can use trigonometry. We know that the string is the hypotenuse of a right triangle, with the height of the kite as one of the legs. The angle of elevation, which is the angle between the string and the ground, is also given. We can use the tangent function to find the height of the kite:
tan(46°) = height / 94
Solving for height, we get:
height = 94 * tan(46°)
Using a calculator, we get:
height ≈ 68.4 ft
Therefore, the height of the kite is approximately 68.4 ft.
We use the given angle of elevation and the length of the string to set up a right triangle with the height of the kite as one of the legs. Then, we use the tangent function to relate the angle to the height of the kite. Finally, we solve for the height using a calculator and round to the nearest tenth as requested.
Learn more about the height
https://brainly.com/question/28122539
#SPJ4
Complete Question:
A kite flying in the air has a 94-ft string attached to it, and the string is pulled taut. The angle of elevation of the kite is 46 °. Find the height of the kite. Round your answer to the nearest tenth.
the profit p (in dollars) generated by selling x units of a certain commodity is given by the function p ( x ) = - 1500 + 12 x - 0.004 x ^ 2 What is the maximum profit, and how many units must be sold to generate it?
The profit (p) is $7500 generated by selling 1500 units of a certain commodity is given by the function p ( x ) = - 1500 + 12 x - 0.004 x²
To maximize our profit, we must locate the vertex of the parabola represented by this function. The x-value of the vertex indicates the number of units that must be sold to maximize profit.
We may use the formula for the x-coordinate of a parabola's vertex:
x = -b/2a
where a and b represent the coefficients of the quadratic function ax² + bx + c. In this situation, a = -0.004 and b = 12, resulting in:
x = -12 / 2(-0.004) = 1500
This indicates that when 1,500 units are sold, the profit is maximized.
To calculate the greatest profit, enter x = 1500 into the profit function:
P(1500) = -1500 + 12(1500) - 0.004(1500)^2
P(1500) = -1500 + 18000 - 9000
P(1500) = $7500
Therefore, the maximum possible profit is $7,500 and it is generated when 1,500 units are sold.
Learn more about Profit maximization:
https://brainly.com/question/30436087
#SPJ4
To achieve this maximum profit, exactly 1500 units must be sold.
To find the maximum profit and the number of units needed to generate it, we can use the given profit function p(x) = -1500 + 12x - 0.004x^2. We need to find the vertex of the parabola represented by this quadratic function, as the vertex will give us the maximum profit and the corresponding number of units.
Step 1: Identify the coefficients a, b, and c in the quadratic function.
In p(x) = -1500 + 12x - 0.004x^2, the coefficients are:
a = -0.004
b = 12
c = -1500
Step 2: Find the x-coordinate of the vertex using the formula x = -b / (2a).
x = -12 / (2 * -0.004) = -12 / -0.008 = 1500
Step 3: Find the maximum profit by substituting the x-coordinate into the profit function p(x).
p(1500) = -1500 + 12 * 1500 - 0.004 * 1500^2
p(1500) = -1500 + 18000 - 0.004 * 2250000
p(1500) = -1500 + 18000 - 9000
p(1500) = 7500
So, the maximum profit is $7,500, and 1,500 units must be sold to generate it.
To learn more about parabola: brainly.com/question/8227487
#SPJ11
Write the functions in standard form:
h(x)=2(x-3)²-9
h(x)=
p(x) = -5(x + 2)² + 15
p(x)=
Answer:
[tex]h(x)=2x^2-12x+9[/tex], [tex]p(x)=-5x^2-20x-5[/tex]
Step-by-step explanation:
To get to the standard form of a quadratic equation, we need to expand and simplify. Recall that standard form is written like so:
[tex]ax^2+bx+c[/tex]
Where a, b, and c are constants.
Let's expand and simplify h(x).
[tex]2(x-3)^2-9=\\2(x^2+9-6x)-9=\\2x^2+18-12x-9=\\2x^2+9-12x=\\2x^2-12x+9[/tex]
Thus, [tex]h(x)=2x^2-12x+9[/tex]
Let's do the same for p(x).
[tex]-5(x+2)^2+15=\\-5(x^2+4+4x)+15=\\-5x^2-20-20x+15=\\-5x^2-5-20x=\\-5x^2-20x-5[/tex]
Thus, [tex]p(x)=-5x^2-20x-5[/tex]
if x is a matrix of centered data with a column for each field in the data and a row for each sample, how can we use matrix operations to compute the covariance matrix of the variables in the data, up to a scalar multiple?
To compute the covariance matrix of the variables in the data, the "matrix-operation" which should be used is ([tex]X^{t}[/tex] × X)/n.
The "Covariance" matrix is defined as a symmetric and positive semi-definite, with the entries representing the covariance between pairs of variables in the data.
The "diagonal-entries" represent the variances of individual variables, and the off-diagonal entries represent the covariances between pairs of variables.
Step(1) : Compute the transpose of the centered data matrix X, denoted as [tex]X^{t}[/tex]. The "transpose" of a matrix is found by inter-changing its rows and columns.
Step(2) : Compute the "dot-product" of [tex]X^{t}[/tex] with itself, denoted as [tex]X^{t}[/tex] × X.
The dot product of two matrices is computed by multiplying corresponding entries of the matrices and summing them up.
Step(3) : Divide the result obtained in step(2) by the number of samples in the data, denoted as "n", to get the covariance matrix.
This step scales the sum of the products by 1/n, which is equivalent to taking the average.
So, the covariance matrix "C" of variables in "centered-data" matrix X can be expressed as: C = ([tex]X^{t}[/tex] × X)/n.
Learn more about Covariance Matrix here
https://brainly.com/question/30481066
#SPJ4
The given question is incomplete, the complete question is
Let X be a matrix of centered data with a column for each field in the data and a row for each sample. Then, not including a scalar multiple, how can we use matrix operations to compute the covariance matrix of the variables in the data?
5 cm
Find Surface Area. Rectangles use Aslw or Anbh. Triangles use A=1/ibb.
8 cm
cm
6 cm
2 cm
14
8 can
A=
12.m
12 cm
10 cm
C
First Part
The surface area of the two solids are listed below:
Case 1 - 232 square centimeters
Case 2 - 240 square centimeters
How to find the surface area of a solid
The surface area of a solid is the sum of the areas of all its faces. There are two cases of solids whose surface areas must be determined. The area formulas for triangle and rectangle are, respectively:
Triangle
A = 0.5 · b · h
Rectangle
A = b · h
Case 1
A = (6 cm) · (8 cm) + 2 · 0.5 · (6 cm) · (12 cm) + 2 · 0.5 · (8 cm) · (14 cm)
A = 232 cm²
Case 2
A = 2 · 0.5 · (8 cm) · (3 cm) + (8 cm) · (12 cm) + 2 · (5 cm) · (12 cm)
A = 24 cm² + 96 cm² + 120 cm²
A = 240 cm²
To learn more on surface areas of solids: https://brainly.com/question/31126484
#SPJ1
1. Find the square root of each of the following numbers: (i) 152.7696
need answer by 11:45am
The box plots display measures from data collected when 20 people were asked about their wait time at a drive-thru restaurant window.
A horizontal line starting at 0, with tick marks every one-half unit up to 32. The line is labeled Wait Time In Minutes. The box extends from 8.5 to 15.5 on the number line. A line in the box is at 12. The lines outside the box end at 3 and 27. The graph is titled Super Fast Food.
A horizontal line starting at 0, with tick marks every one-half unit up to 32. The line is labeled Wait Time In Minutes. The box extends from 9.5 to 24 on the number line. A line in the box is at 15.5. The lines outside the box end at 2 and 30. The graph is titled Burger Quick.
Which drive-thru typically has more wait time, and why?
Burger Quick, because it has a larger median
Burger Quick, because it has a larger mean
Super Fast Food, because it has a larger median
Super Fast Food, because it has a larger mean
Question 3
A charity needs to report its typical donations received. The following is a list of the donations from one week. A histogram is provided to display the data.
5, 5, 6, 8, 10, 15, 18, 20, 20, 20, 20, 20, 20
A graph titled Donations to Charity in Dollars. The x-axis is labeled 1 to 5, 6 to 10, 11 to 15, and 16 to 20. The y-axis is labeled Frequency. There is a shaded bar up to 2 above 1 to 5, up to 3 above 6 to 10, up to 1 above 11 to 15, and up to 7 above 16 to 20.
Which measure of variability should the charity use to accurately represent the data? Explain your answer.
The range of 13 is the most accurate to use, since the data is skewed.
The IQR of 13 is the most accurate to use, since the data is skewed.
The range of 20 is the most accurate to use to show that they have plenty of money.
The IQR of 20 is the most accurate to use to show that they need more money.
Question 4
The circle graph describes the distribution of preferred transportation methods from a sample of 400 randomly selected San Francisco residents.
circle graph titled San Francisco Residents' Transportation with five sections labeled walk 40 percent, bicycle 8 percent, streetcar 15 percent, bus 10 percent, and cable car 27 percent
Which of the following conclusions can we draw from the circle graph?
Together, Streetcar and Cable Car are the preferred transportation for 168 residents.
Together, Walk and Streetcar are the preferred transportation for 55 residents.
Bus is the preferred transportation for 45 residents.
Bicycle is the preferred transportation for 50 residents.
Question 5
The line plot displays the number of roses purchased per day at a grocery store.
A horizontal line starting at 1 with tick marks every one unit up to 10. The line is labeled Number of Rose Bouquets, and the graph is titled Roses Purchased Per Day. There is one dot above 1 and 2. There are two dots above 8. There are three dots above 6, 7, and 9.
Which of the following is the best measure of variability for the data, and what is its value?
The range is the best measure of variability, and it equals 8.
The range is the best measure of variability, and it equals 2.5.
The IQR is the best measure of variability, and it equals 8.
The IQR is the best measure of variability, and it equals 2.5.
Question 6
The histograms display the frequency of temperatures in two different locations in a 30-day period.
A graph with the x-axis labeled Temperature in Degrees, with intervals 60 to 69, 70 to 79, 80 to 89, 90 to 99, 100 to 109, 110 to 119. The y-axis is labeled Frequency and begins at 0 with tick marks every one unit up to 14. A shaded bar stops at 10 above 60 to 69, at 9 above 70 to 79, at 5 above 80 to 89, at 4 above 90 to 99, and at 2 above 100 to 109. There is no shaded bar above 110 to 119. The graph is titled Temps in Sunny Town.
A graph with the x-axis labeled Temperature in Degrees, with intervals 60 to 69, 70 to 79, 80 to 89, 90 to 99, 100 to 109, 110 to 119. The y-axis is labeled Frequency and begins at 0 with tick marks every one unit up to 16. A shaded bar stops at 2 above 60 to 69, at 4 above 70 to 79, at 12 above 80 to 89, at 6 above 90 to 99, at 4 above 100 to 109, and at 2 above 110 to 119. The graph is titled Temps in Desert Landing.
When comparing the data, which measure of center should be used to determine which location typically has the cooler temperature?
Median, because Desert Landing is symmetric
Mean, because Sunny Town is skewed
Mean, because Desert Landing is symmetric
Median, because Sunny Town is skewed
Question 7
At a recent baseball game of 5,000 in attendance, 150 people were asked what they prefer on a hot dog. The results are shown.
Ketchup Mustard Chili
63 27 60
Based on the data in this sample, how many of the people in attendance would prefer mustard on a hot dog?
900
2,000
2,100
4,000
The drive-thru with typically more wait time is Burger Quick, because it has a larger median. The Option A.
Why does Burger Quick have a larger median for wait time?The median is a measure of central tendency that represents the middle value of a set of data. In this case, the median wait time at Burger Quick is 15.5 minutes, while the median wait time at Super Fast Food is 12 minutes.
This indicates that, on average, customers at Burger Quick experience a longer wait time compared to customers at Super Fast Food. The larger median at Burger Quick suggests that there may be some longer wait times skewing the data towards the higher end which could be due to various factors such as slower service, or other operational issues at Burger Quick resulting in a longer wait time for customers at their drive-thru.
Read more about median
brainly.com/question/16408033
#SPJ1
can someone give me the answers to these 5?? pleaseee!!
The MAD of the hourly wages given would be $ 0.48. The range would be $ 2.00. Q1 would be $8.25. Q3 would then be $9.25. The IQR would be $1.00
How to find the number summaries ?Calculate the MAD:
First, find the mean of the data set:
mean = (sum of all values) / (number of values)
mean = (8.25 + 8.50 + 9.25 + 8.00 + 10.00 + 8.75 + 8.25 + 9.50 + 8.50 + 9.00) / 10
mean = 88.00 / 10 = 8.80
Then, find the mean of these absolute deviations:
MAD = (sum of absolute deviations) / (number of values)
MAD = (0.55 + 0.30 + 0.45 + 0.80 + 1.20 + 0.05 + 0.55 + 0.70 + 0.30 + 0.20) / 10
MAD = 4.10 / 10 = 0.41
Calculate the range:
range = maximum value - minimum value
range = 10.00 - 8.00 = 2.00
Find Q1 and Q3:
{8.00, 8.25, 8.25, 8.50, 8.50, 8.75, 9.00, 9.25, 9.50, 10.00}
Q1 is the median of the lower half, and Q3 is the median of the upper half.
Lower half: {8.00, 8.25, 8.25, 8.50, 8.50}
Upper half: {8.75, 9.00, 9.25, 9.50, 10.00}
Q1 = median of lower half = 8.25
Q3 = median of upper half = 9.25
Calculate the IQR:
IQR = Q3 - Q1
IQR = 9.25 - 8.25 = 1.00
Find out more on MAD at https://brainly.com/question/3250070
#SPJ1
Using trig to find angles.
Solve for x. Round to the nearest tenth of a degree, if necessary.
Answer:
x ≈ 39.5°
Step-by-step explanation:
using the cosine ratio in the right triangle
cos x = [tex]\frac{adjacent}{hypotenuse}[/tex] = [tex]\frac{OP}{NP}[/tex] = [tex]\frac{64}{83}[/tex] , then
x = [tex]cos^{-1}[/tex] ( [tex]\frac{64}{83}[/tex] ) ≈ 39.5° ( to the nearest tenth )
at a booth at the school carnival in past years, they've found that 22% of students win a stuffed toy ($3.60), 16% of students win a jump rope ($1.20), and 6% of students win a t-shirt ($7.90). the remaining students do not win a prize. if 150 students play the game at the booth, how much money should the carnival committee expect to pay for prizes for that booth?: *
For a percentage data of students who play the different game and win the prize, the expected amount to pay for prizes for that booth by the carnival committee is equals to the $218.70.
We have a booth of school carnival in past years, The percentage of students win a stuffed toy = 22%
The percentage of students win a jump rope = 16%
The percentage of students win a t-shirt
= 6%
The winning amount for stuffed toy game = $ 3.60
The winning amount for jump rope game = $1.20
The winning amount for t-shirt game
= $7.90
The remaining students do not win a prize. Now, total number of students play the game at the booth = 150
So, number of students who win stuffed toy = 22% of 150 = 33
Number of students who win jump rope = 16% of 150 = 24
Number of students who win stuffed toy
= 6% of 150 = 9
For determining the expected pay using the simple multiplication formula. Total expected pay for prizes for that booth is equals to the sum of resultant of multiplcation of number of students who play a particular game into pay amount for that game. That is total excepted pay in dollars = 3.60 × 33 + 1.20 × 24 +7.90 × 6
= 218.7
Hence required value is $218.70.
For more information about percentage, visit:
https://brainly.com/question/843074
#SPJ4