Two asteroids crashed. The crash caused both asteroids to change speed. Scientists want to use the change in speed and motion to figure out which asteroid has more mass. Based on the information in the diagram, which statement is correct? In your answer, explain what the forces were like and why the asteroids changed their motion.

Asteroid 1 has more mass than Asteroid 2.
Asteroid 1 and Asteroid 2 are the same mass.
Asteroid 1 has less mass than Asteroid 2.

Answer:Most of this ancient space rubble can be found orbiting the Sun between Mars and Jupiter within the main asteroid belt. Asteroids range in size from Vesta – the largest at about 329 miles (530 kilometers) in diameter – to bodies that are less than 33 feet (10 meters) across. The total mass of all the asteroids combined is less than that of Earth's Moon.❤

Mars, the Moon, and Jupiter, Where we have found evidence of the early history of Earth.

The giant-impact theory is currently the one that is most frequently accepted. According to this theory, the Moon was created after the Earth collided with a smaller planet that was around Mars' size.

The Moon was created when the impact's leftover debris gathered in an orbit around Earth. The main asteroid belt, which extends between Mars and Jupiter, is home to the majority of this old space debris.

Asteroids range in size from the largest, Vesta, which has a diameter of roughly 329 miles (530 kilometers), to bodies that are about 33 feet (10 meters) wide. The cumulative mass of all asteroids is less than that of the moon on Earth.

Therefore, option B is correct.

Learn more about Earth, here:

https://brainly.com/question/17801422

#SPJ2

Answer:

What can electrical energy be transformed into?

Electrical energy is transformed into many forms - mechanical/kinetic, sound, heat, light, and other forms of electromagnetic radiation - by everyday appliances.

Explanation:

Answer:

none of the other answers could be correct.

Explanation:

The sun nuclear energy transfers to radiant energy A fire Chemical energy transfers to thermal and radiant energy. wind turbine Kinetic motion energy transfers to electrical energy. Lightbulb Electrical energy transfers to radiant and thermal energy. Radio Electrical energy transfers to sound energy.

Basically your liquid will go over the line because you are adding more mass. the balloon will inflate because  of mass filling it.  Part 1  I noticed that there was a change from the original line.   part 2  Some mass is lost. The bubbles are the gas leaving. The balloon increases in size because of the mass. The cup got heavier when I added the vinegar.

Gas leaving caused the bubbles.

Answer:

Explanation:

from F=ma, 30=5a, a=6

[tex]P=U.I => I=\frac{P}{U}=\frac{1500}{110}=\frac{150}{11}<A>\\I=\frac{U}{R}=> R=\frac{U}{I} = \frac{110}{\frac{150}{11} }=8.06< ohm>[/tex]

The answer is: A. 8.06 ohm

ok done. Thank to me :>

Answer:

The most important solution to this problem was proposed by Claudius Ptolemy in the 3rd century AD. He argued that planets move on two sets of circles, a deferent and an epicycle. This explained retrograde motion while keeping the planets in their circular orbits around the Earth.

Explanation:

Answer:

Galaxies are too far away for astronomers to take real 3D measurements, but we can infer their shape based on the movement of stars. ... This is also true of less common spiral galaxies like the Milky Way. The bulge near the center contains older stars, while the flattened arms are home to younger ones.

Explanation:

The orbits of stars can also affect the shape of a galaxy through a variety of density waves that are produced when material is compressed into something comparable to a traffic jam in galaxies.

A star is defined as a celestial object consisting of a luminous sphere of plasma held together by self-gravity where the closest star to Earth is the Sun. While many other stars are visible to the uncovered eye at night, their extreme distance from Earth causes them to appear as fixed points of light.

Galaxies are too far away for astronomers to take true 3D measurements, through which we can estimate their size based on the motion of stars, which is also true for less common spiral galaxies like the Milky Way.

Thus, the orbits of stars can also affect the shape of a galaxy through a variety of density waves that are produced when material is compressed into something comparable to a traffic jam in galaxies.

Learn more about stars, here:

https://brainly.com/question/29359578

#SPJ6

If the person inserted a nail with a hammer instead of the screw with the screwdriver, the force applied would be greater, but the distance would be shorter. The correct option is A.

The action of push or pull in order to make a body change its state of motion or rest is called Force.

As the force is pressure per unit area. Force is inversely proportional to the area over which force is to applied.

The hammer would take more force to insert the nail. The screw has its helix which is to be inserted and application of force is small.

Thus, the force applied would be greater, but the distance would be shorter.  The correct option is A.

Learn more about force.

https://brainly.com/question/11065475

#SPJ2

t if the person inserted a nail with a hammer instead of the screw with the screwdriver?

975 J of heat energy is needed to increase the temperature from 150°C to  250°C of given mass of gold.

From specific heat formula,

[tex]Q = mc \Delta T[/tex]

Where,

[tex]Q[/tex] - Heat absorbed

[tex]m[/tex] - mass of  gold = 75. 0 g

[tex]c[/tex] - specific heat of gold = 0. 13 J/g°C

[tex]\Delta T[/tex]- temperature difference =  150°C -  250°C = 100°C

Put the values in the formula,

[tex]Q = 75\times 0.13 \times 100 }\\\\Q = 975 {\rm \ J}[/tex]

Therefore, 975 J of heat energy is needed to increase the temperature of given mass of gold.

To know more about specific heat formula,

https://brainly.com/question/1209542

The heat required to increase the temperature of the gold is 980 J

The correct answer to the question is Option B. 980 J

We'll begin by calculating the change in the temperature of the gold

ΔT = T₂ – T₁

ΔT = 250 – 150

ΔT = 100 °C

Finally, we shall determine the heat required.

Q = MCΔT

Q = 75 × 0.13 × 100

Q = 975 J

Q ≈ 980 J

The correct answer to the question is Option B. 980 J

Learn more about heat transfer:

https://brainly.com/question/10854640

Answer:

0.667; 4.965

Explanation:

Look at the picture I attached for the force analysis.

a) The coefficient=Friction/Normal Force. Because it's at constant speed, the force of friction + mgsin58.1° (because it's on an inclined plane and has split forces) is equal to the applied force (70.4N). Normal force is not equal to weight force though, because the box is on an inclined plane; it's equal to mgcos58.1°.

b) If it were to break, then the box no longer has an applied force, and the direction of friction has changed to up the inclined plane. F=m/a, so acceleration = mgsin58.1°- Friction/mass

The simple experiment you could run to find out which material accepts electrons more easily is to rub them together and move the two charge misery materials one after the other to the positive - charge helium - filled balloon.

According to the fundamental law of static electricity which state that unlike charges attract each other while like charges repel.

The simple experiment you could run if you are handed two mystery materials, and told to find out which materials accepts negative charges more easily charging by friction.

This can be employed by rubbing the two misery materials together and move them one by one to a  positively-charged, helium-filled balloon which is tied to a tabletop with a string of a meter long.

The misery material that accepts electron more easily will be attracted to the positive - charge helium - filled balloon. While the gravitational pull will pull down the other misery material. The attraction  will not be effective.

Learn more about static charges here: https://brainly.com/question/14210347

Resistance = volts / amps

Resistance = 12 volts / 3 amps

Resistance = 4 Ohms

Answer: 4 Ohms

Answer:

Suppose the micrometeoroid weighed 1 g = .001 kg

Suppose also the spacecraft were moving at 18,000 mph (1.5 hrs per rev)

Usually, the smaller particle would be moving but for simplicity suppose that it were stationary wrt the ground

v = 18000 miles / hr * 1500 m/mile / 3600 sec/hr = 7500 m/s

KE = 1/2 * .001 kg * (7500 m)^2 = 28,125 Joules

One can see that 28000 Joules could be damaging amount of energy

Answer:

a

Explanation:

bc i said so its right lol

cause there's no gravity therefore they appear weightless

Answer:3.4m

Explanation:

Something that is falsely advertised to help different health issues. An example could be Eyeball massagers

The characteristics of parallel circuits allow to find the correct answer for the question about what happens when a light bulb is:  

   D) Bulb 2 will stay lit and the light source will be stronger.

Electrical circuits have two forms and connection:  

   • Serie. In this case there is only one path through which current can circulate the current.  

   • Parallel. There are several roads where the current can circulate.  

In a parallel circuit, the total current in the circuit is the sum of the current in each branch, the voltage in all branches remains constant.

Let's analyze the claims:  

A) False. The bulbs are independent, what happens to one does not affect the other.

B) False. Both bulbs were on, so the second bulb should not be affected.  

C) False. When burn a light bulb, there is more current in the other branch, The opposite happens.  

D) True. When burn a light bulb there is more current in the other branch and therefore the light bulb 2 can dissipate more power by shining a little brighter.

In conclusion, using the characteristics of parallel circuits we can find that the correct answer for the question about what happens when a light bulb burns out is:  

        D) Bulb 2 will stay lit and the light source will be stronger.

Learn more about parallel circuits here:  brainly.com/question/23088951

Answer:

Explanation:

Use mathematical representations to describe a simple model for waves that includes how the amplitude of a wave is related to the energy in a wave. Patterns can be used to identify cause and effect relationships.

Answer:

the answer is 2.

Explanation:

Answer:

They go same in the vaccum

Answer:

2 * 10^4

Explanation:

(3 * 10^4)(4 * 10^4) / (6 * 10^4)

= (12 * 10^8)/(6 * 10^4)

= 2 * 10^4

Microwave Radiation????????????

Answer:

Rube Goldberg Machine is "a comically involved, complicated invention, laboriously contrived to preform a simple operation." 2. What are the 6 Simple Machines? A. The 6 Simple Machines are: wedge, screw, lever, wheel and axel, inclined plane and pulley.

Answer:

Hey mate....

Explanation:

This is ur answer.....

There are 2 definitions :-

Hope it helps!

Brainliest pls!

Follow me! :)

Answer:

1) 2    2)5      3)2 or 5

Explanation:

i dont have one

Answer:

8.40 is your answer.

Explanation:

The average power  she produces in a day be   97.22 Watts.

The quantity of energy moved or converted per unit of time is known as power in physics. The watt, or one joule per second, is the unit of power in the International System of Units. Power is also referred to as activity in ancient writings. A scalar quantity is power.

Marcia consumes total amount of energy per day = 2000 calories = 8.4 × 10⁶ joule.

1 day = 24 × 60 × 60 second = 86400 second

So, average power  she produces in a day = energy/time

=  8.4 × 10⁶ joule/86400 second

= 97.22 Watts

Learn more about power here:

https://brainly.com/question/29575208

#SPJ2