Answer:
Technician A
Explanation:
Technician A is correct because, the hand force required is not supposed and even should not exceed 80 lb.
On the other hand, the foot force limit is even higher at 100 lb. Thus, the required foot force break should not exceed 100 lb. We are given 80 lb in the question, which is quite less than 100 lb. It could exceed 80, but must not exceed 100. Thus only Technician A is correct among them both.
The support of the State governments in all their rights…I consider one of the essential principles of our Government… How is Jefferson's view reflected in the U.S. Constitution? The U.S. Constitution lists all powers given to the states. The U.S. Constitution gives unlimited power to the states. The U.S. Constitution says powers not given to the federal government belong to the states. The U.S. Constitution gives unlimited power to the federal government and little to the states.
Answer:
The Correct Answer is
The U.S. Constitution says powers not given to the federal government belong to the states.
Explanation:
In the paragraph, Jefferson states defending the rights of states is one of the fundamental, or most significant, policies of our administration. Did that get you to remember the Tenth Amendment? It restrains the authority of the central government, defending the rights of states. It states that the central government only has the authorities listed in the Constitution. Unlisted authorities belong to the states.
Answer:
D
Explanation:
I need this one fast!!!!
Nitrous oxide is the chemical name for "laughing gas." What are the names and the number of atoms in a molecule of
nitrous oxide, N2O?
1.one nitrogen atom and two oxygen atoms
2.two nitrogen atoms and one oxygen atom
3. one nitrogen atom and one oxygen atom
4. two nitrogen atoms and two oxygen atoms
Answer:
b
Explanation:
there are 2 nitrogen and 1 oxygen, you can tell by the little number after the letter. if there is no number, then it's just one atom
Answer:
B.
Explanation:
I got it right on my test.
a 0.006kg bullet is fired at 350 m/s into a container that stops it at .30 m. what is the average force stopping the bullet?
Answer:
is this a mudder question
A block measuring 20cm by 10cm by 5cm rests on a flat surface. Determine the maximum pressure it exerts on the surface.
Reviewing old tests and quizzes will not help you determine what will be on a test because teachers don’t like to give students hints about what could be on future tests. Please select the best answer from the choices provided T or F
Answer: false
Explanation: on edg
It is false that reviewing old tests and quizzes will not help you determine what will be on a test because teachers don’t like to give students hints about what could be on future tests.
What is reviewing old tests?A test review verifies whether or not the modifications made to the code, data, or documentation are accurate.
In other words, it is an evaluation of the degree to which the stated goals have been attained that has been done at a set period.
Exam analysis might provide insights that can help you become a more self-sufficient learner.
You can improve your performance the next time you are tested by revising your strategy after reviewing returned examinations to learn why you made mistakes.
Thus, the given statement is false.
For more details regarding test preparations, visit:
https://brainly.com/question/19671752
#SPJ6
action reaction forces are in which one of newtons laws
Answer:
the third law
Explanation:
could u vote me brainliest plz? thx :)
How many times larger is the mass of a proton compared to the mass of an electron?
Answer:
1.67262 × 10−27 kg, which is 1,836 times the mass of an electron.
Please type any energy transformation it will help a lot i would really appreciate it
prize: brainliest
Answer:
1. Electric generator
2. Using a battery powered torchlight
3. A fire(burning wood)
4. Electric lamp
5. Car using gas
Explanation:
What did the caterpillar have to do to create the curved graphed with a gradually steeper slope?
if 270 watts of power is used in 42 seconds, how much work was done
Answer: W = 11340J
Explanation:
Hey there! I will give the following steps, if you have any questions feel free to ask me in the comments below.
So this is the Formula: Power = Work / Time.
Step 1: Find the Formula
P = W / T
Step 2: Make W the subject of the equation.
W = PT
Step 3: Given.
P = 270 Watts, T = 42 seconds
Step 4: Substitute these values into equation 2 .
W = 270(42)
Step 5: Simplify.
W = 11340J
The amount of work done was 11340.
~I hope I helped you! :)~
Answer:
W = 11340J
Explanation:
A cannon is fired horizontally at 243 m/s off of a 62 meter tall, shear vertical cliff. How long will it take the
cannon ball to reach the ground?
+ 9. What force (in units of Newtons) is needed to give a 3.5 m/s" acceleration to a 1200 kg car?
Answer:
4200 Newtons
Explanation:
Force = mass x acceleration
1200 x 3.5 = 4200
please answer! thank you!
Answer:
Maybe A.... I'm not sure
Explanation:
Which of the following is NOT an acceleration?
O Riding your bike faster when you head down a hill
Slowing your bike so you can make it up a hill
O Coming to a stop at an intersection
Riding down the street at a constant velocity
Answer:
coming to stop at intersecton
Explanation do u not know what acceleration is?
Where on the periodic table are the anions of ionic bonds found?
a . Anions are the negatively charged nonmetals on the right side of the periodic table
b. Anions are the negatively charged metals on the right side of the periodic table
c. Anions are the positively charged nonmetals on the left side of the periodic table
d. Anions are the positively charged metals on the left side of the periodic table
answer:
b.
explanation:
ik its right trust me <3
cause metals on the left and in the center of the periodic table form ionic bonds with nonmetals on the right of the periodic table.
If a person is picking up a book with the force of 50 N and the gravity is pushing down with 15 N, what is the net force?
Answer:
[tex]the \: net \: force = \: 50 - 15 = 35.[/tex]
Answer:
Net force is going to be GREATER FORCE - LESS FORCE if they are working in opposite direction
so,
50N - 15N = 35N
When you cook a marshmallow on a metal poker tool over an open flame, energy is transferred. Identify the three different ways thermal energy is transferred in this situation. Be sure to name the specific places or phenomenon in this system where each of the types of thermal energy transfer is occurring and the direction the energy is being transferred (from what to what).
Answer:
The three ways thermal energy is transferred are;
1) Conduction
2) Convection
3) Radiation
Explanation:
1) The conduction of the heat from the open flame to the marshmallow is through the direct contact of the flame with the marshmallow, such that the flame the region of the combustion reaction, that produces light and heat touches the marshmallow
2) The convection process is the transfer of heat from the rising heated combustion products, as well as the heated air that rises from the flame
3) The radiation heat transfer is the transfer of the heat from the fire to the marshmallows directly by the heat the moves in the form of electromagnetic waves at temperatures above 1000 K, without the need for a medium, such that the marshmallow can be heated by the heat coming from side of the flame.
A student weighs 530 N. The walk to the top of a 3m staircase. It takes them 5 seconds. How
much work did they do?
*
Answer:
W = 1590 J
Explanation:
We could use the formula of potential energy to find work as both have the same units,
W = mgh
since weight = mg so,
Work = weight x height
= 530 x 3
= 1590 J
Answer:
The work will be 1590 J
since the formula is W = F x D so I cancel the time
Explanation:
Given:
(Force) F = 530N
(Distance)D = 3m
Unknown:
W or Work
Formula and Solution:
W = F x D
W = (530N) (3m)
Final Answer:
W = 1 590 N·m or simplify as 1590 J
1. Newton's 1st Law: A skydiver opened their parachute and now experiences a force of gravity of -450 N (down) and a force of air resistance of +450N (up).
a) What is the net force (sum) acting on the skydiver?
Answer:
How long does it take a dropped object to fall 45 meters?
Answer:
If we forget about drag for a second then any object will accelerate at 9.8 m/s/s. The distance traveled is (9.8 m/s)/2 * (x seconds)^2, so solving for 45 meters the no-air fall will take 3.06 seconds and reach 30 m/s or 108 kph or 67.1 mph
Explanation:
What happens to potential energy as the mass of an object decreases?
Answer:
As the mass of the object decreaes, the potential energy also decreases.
Explanation:
what are 3 sources of heat inside earth?
1. Heat from when Earth was formed.
2. Frictional Heat, which is caused by heavier core material sinking to the center of the Earth.
3. Heat from the decay of elements that are radioactive.
A car traveling initially at the speed of 30 m/s slows down at the rate of -2m/s^2 for a distance of 60 meters. What is the car’s velocity after covering this distance?
Answer:
Vf = 25.7 [m/s]
Explanation:
To solve this problem we must use the following kinematics equation:
[tex]v_{f} ^{2}= v_{i} ^{2}-(2*a*x)[/tex]
where:
Vf = final velocity [m/s]
Vi = initial velocity = 30 [m/s]
a = desacceleration = 2 [m/s^2]
x = distance = 60 [m]
Note: the negative sign in the equation means that the car slows down.
Now replacing:
[tex]v_{f}^{2}=(30)^{2}-(2*2*60)\\ v_{f}^{2} = 660\\v_{f} =\sqrt{660} \\v_{f}=25.7[m/s][/tex]
HEY CAN ANYONE PLS ANSWER DIS!!!!!!!!!!!!!!!
Answer:
Explanation:
you can seperate mixtures by filtration, evaporation, distillation and chromatography.
Answer:
I think, i can separate the mixtures through
FiltrationMagnitizationeverpouration to drynessPLEASE HELP
To celebrate a victory, a pitcher throws her glove straight up into the air with an initial velocity of 6.0 m/s. What is the maximum height of the glove? (Show work)
Answer:
h = 1.8 m
Explanation:
The initial velocity of the glove, u =- 6 m/s
We need to find the maximum height of the glove. Let it is equal to h. Using equation of kinematics. At the maximum height v = 0
[tex]v^2-u^2=2ah[/tex], h is the maximum height and a = -g
[tex]0^2-(6)^2=2\times (-10)\times h\\\\h=\dfrac{36}{20}\\\\h=1.8\ m[/tex]
Hence, it will go up to a height of 1.8 m.
Spring A has a spring constant of 5 N/m and spring B has a force constant of 9 N/m. A weight of 2 kg is applied to spring A and a weight of 10 kg is applied to spring B. Which of the following is true for the final displacements of springs A and B?
a) Spring B has a larger displacement than spring A. b) Spring A has a larger displacement than spring B. c) Spring A and spring B have the same displacement.
Answer: Option A.
Spring B has a larger displacement that spring A.
Explanation:
Spring B has a larger displacement that spring A .
By using Hooke's law.
F=-Kx
Where F is force, K is spring constant and x is displacement.
For spring a
Weight / force is 2 kg
Spring constant (K) is 5/nm
Therefore,
F=-Kx
2=-5x
X=2/-5
X= -0.4m
For spring B.
Weight is 10Kg
Spring constant is 9N/m
F=-Kx
10=-9x
X=-10/9
=-1.1m
Therefore Spring B have larger displacement than spring A.
In Hooke's law, negative sign that is present on the spring's force indicate that the force exerted by the spring opposes the spring's displacement.
True or False: Heavy elements such as Carbon and Nitrogen, that are necessary for life were created in the Big
Bang and have been around in the Universe since that time.
Answer:
i believe the answer is true
Explanation:
everything was created in the big bang
Which statement describes all solids?
Answer:
They contain loosely packed atoms.
Explanation:
what is acceleration
Answer:
Explanation:
Acceleration is the rate of change of velocity. Usually, acceleration means the speed is changing, but not always. When an object moves in a circular path at a constant speed, it is still accelerating, because the direction of its velocity is changing.
[tex]{\tt{\red{\underline{\underline{\huge{Answer:}}}}}}[/tex]
[tex]\longrightarrow[/tex] The rate of change of velocity per unit time is called acceleration.
[tex]\longrightarrow[/tex] Its SI unit is m/s².
[tex]\huge\boxed{\fcolorbox{blue}{red}{Thank you}} [/tex]
it takes 275n to set a stationary 77.3 crate in motion. what is the coefficient of static friction?
Note: I'm assuming the data 77.3 is the mass of the crate.
Answer:
[tex]\mu_s =0.36[/tex]
Explanation:
The coefficient of static friction, called \mu_s is the ratio between the force needed to start moving an object above a rough surface (Fr), and the normal force the surface exerts on the object (N).
[tex]\displaystyle \mu_s =\frac{Fr}{N}[/tex]
The normal force is numerical equivalent to the weight of the body if no other external forces are acting.
[tex]N=m\cdot g[/tex]
The mass of the crate is m=77.3 Kg, thus its weight and normal force is:
[tex]N=77.3\ kg\cdot 9.8\ m/s^2[/tex]
[tex]N= 757.54\ Nw[/tex]
Now we calculate the coefficient:
[tex]\displaystyle \mu_s =\frac{275\cancel{N}}{757.54\cancel{N}}[/tex]
[tex]\boxed{\mu_s =0.36}[/tex]
Answer:
0.36
Explanation: