Tyler wants to learn about the types of insects in the soil near his house. Which would be a benefit of carrying out a descriptive investigation?

He could collect a large amount of data for a low cost.
He could control most of the variables affecting the insects.
He would get results that might change after the investigation.
He would be able to study cause-and-effect relationships.

Answer: not alot

Explanation:

By switching to a higher power objective lens, the working distance is shrunk while the overall magnification increases.

What is working distance of a microscope?

Working distances for high-power oil immersion objectives can be as low as 0.1 mm and as high as 50 mm for dissecting or stereo microscope objectives. As magnification, resolution, and numerical aperture rise, it falls. Most microscope objectives are made with limited operating distances in mind.

By switching to a higher power objective lens, the working distance is shrunk while the overall magnification increases. On the other hand, lowering the total magnification while extending the working distance by adding a reduction objective.

To learn more about microscope click on the link below:

https://brainly.com/question/23432715

#SPJ4

Answer: i counted 10 waves on your graph

Explanation: hope this helps!!!

Answer:

The Number of waves is 9 based on the trough and crest.

The two marbles are separated by around 133 m or 30 vehicle lengths.

It is possible to determine the distance between our marble and the most distant galaxies in the universe by first comparing the size of the Milky Way Galaxy to that of a marble.The Milky Way Galaxy is just around 2,000 LY (Light Years) thick and roughly 100,000 LY (Light Years) wide.

Let's continue using the conversion of:

1 cm = 100,000 LY

The Andromeda and Triangulum galaxies are two of the noteworthy members of the Local Group, a collection of galaxies nearby to our own. On this scale, we can assume that distance from Earth and distance from the edge of the Andromeda Galaxy are approximately 2.5 MLY (2.5 Million Light Years) apart.The galaxy spans about 220,000 LY. So let's determine where to place this marble:

2,500,000/100,000 = 25 cm

We may lay a marble to symbolise the Andromeda Galaxy that is nearly twice the size of our Milky Way Galaxy marble at 25 cm.

We can see farther as our observational equipment advances. A galaxy 13.3 BLY distant is the furthest object Hubble can currently observe .

So let's try placing the marble here:

13,300,000,000/100,000 = 13,300cm = 133m

To put this into context, the two marbles are separated by around 30 vehicle lengths.

See the reference pic below:

The complete question is: In a scale model of the Local Group of Galaxies, in which the Milky Way Galaxy was the size of a marble (about 1 cm in diameter), how far would it be from the Milky Way Galaxy to the most distant galaxies in the observable universe on this scale?

Explanation:

average speed= distance/time

=180÷3

=60 km/h

The correct answer is 598.4m

Two key elements in describing a wave's nature are its wavelength and frequency. Wavelength is essentially a measurement of the separation between two adjacent wave crests or troughs. It is always calculated in the direction of the wave, and the sign for it is. Given that it is a measurement of distance, it is stated in terms of metres.

Frequency: The number of times a particle vibrates during a sound wave's passage through a medium is referred to as frequency. The total amount of vibrations that occur within a certain period of time is the frequency.

Wavelength: The distance between two successive curve crests or troughs is known as a wavelength. The distance between the crests and troughs of a high-frequency wave is smaller than that of a low-frequency wave, and vice versa.

s=93km=93000m

f=11.1hz

t=24.43 sec

λ=v/f

λ=s/ft

λ=93000/(11.1)(14)

λ=93000/155.4

λ=598.4m

To learn more about wavelength refer the link:

https://brainly.com/question/13997605

#SPJ4

The subway train is moving to the left and then comes to a stop, what direction is the acceleration will be towards right and will be positive.

The train comes to a stop, this means that the velocity gradually decreases. Hence, the acceleration must be positive and points towards the right.

velocity and acceleration:

velocity is the charge of alternate inside the position of an object, at the same time as acceleration is the rate of trade of the fee. consider the movement alongside a line. If the velocity and acceleration are in the same route, then the charge constantly will growth in time. inside the meantime, if the speed and acceleration are in contrary instructions, then the rate steadily decreases to 0 speed, reverses route, and now the velocity is in the identical path of the acceleration.

Learn more about velocity https://brainly.com/question/18084516

#SPJ4

it will take around 1,448 billion years for U-238 atoms to decay.

When a radioactive nucleus spontaneously releases excess energy, that energy is referred to as ionizing radiation. radiation from ions may manifest as alpha or beta particles. either gamma rays or particles. The action of Radioactive means to emit radiation.

U-238 has a radioactive half-life of 4.5 billion years, which is independent of the original concentration.

c₀ - initial concentration of U-238.

c - concentration of U-238 remaining at the time.

t = 4,5·10⁹ y.

First, calculate the radioactive decay rate constant λ:

λ = 0,693 ÷ t = 0,693 ÷ 4,5·10⁹ y = 1,54·10⁻¹⁰ 1/y.

ln(c/c₀) = -λ·t₁.

ln(0,8/1) = -1,54·10⁻¹⁰ 1/y · t₁.

t₁ = 1,448·10⁹ y.

Therefore, it will take around 1,448 billion years for U-238 atoms to decay.

To know more about radioactive materials follow

https://brainly.com/question/2320811

#SPJ4

The mass flow rate of water is 0.087 Kg/s.

Contact tube diameter means no pressure head drop.

P=C heating done at P=C.

MC(T₁ - T₂) = Q = W

M × 1.015 (360-315) = 4000

M = 4000 / 1.015 × [tex]10^{3}[/tex] × 45

M = 0.087 Kg/s

Pressure is defined due to the fact the pressure of all the gasoline particle/wall collisions divided thru the vicinity of the wall: All gases exert strain ; it's far one of the important measurable portions of this phase of depend.

From the weather to air tour, strain performs a dramatic position in our lives. It plays especially vital roles at some point of chemical reactions. through manipulating stress, chemists can pressure chemical reactions to occur and the transitions among solids, beverages, and gases to boost up.

The primary unit of pressure is the pascal, described because the stress exerted with the useful resource of a pressure of one newton perpendicularly upon a place of one square meter.

Learn more about pressure here:- https://brainly.com/question/25736513

#SPJ4

The quantum number of a particle of mass m confined to a one-dimensional box of length l when its energy is 2 h2/ml2 is 4.

What is quantum number?

The collection of numbers known as quantum numbers is used to describe an electron's position and energy in an atom. The four categories of quantum numbers are primary, azimuthal, magnetic, and spin quantum numbers.

Given that,

Eₙ = 2h²/mL²,

The equation for the energy of a particle of mass m confined to a one-dimensional box of length L is given by:

[tex]E_n = \frac{n^{2} h^{2}}{8mL^{2}}[/tex],

Equating this equation with the energy given in the question.

i.e. Eₙ = 2h²/mL².

We get,

[tex]\frac{n^{2} h^{2}}{8mL^{2}} = \frac{2h^{2}}{mL^{2}}[/tex]

[tex]\frac{n^{2}}{8} = 2[/tex]

[tex]n = \sqrt{16}[/tex]

n = 4

Therefore,

The quantum number of a particle of mass m confined to a one-dimensional box of length l when its energy is 2 h2/ml2 is 4.

To know more about quantum number, go to URL

https://brainly.com/question/25786066

#SPJ4

The angular speed of the car's wheel in units of radians/second is determined as 31.42 radian per second.

The angular speed of the car's wheel is calculated as follows;

ω = 5 rev/sec

Convert the angular speed in revolutions per second to radian per second.

ω = 5 rev/sec x 2π rad/rev

ω = 10π rad/sec

ω = 31.42 rad/sec

Thus, the angular speed of the car's wheel in units of radians/second is determined as 31.42 radian per second.

Learn more about angular speed here: https://brainly.com/question/24158647

#SPJ4

The angular frequency of the proton which is cyclotron with a magnetic field of 0.36t is 4.31 x 10⁷ rad/s .

The electromagnetic force, one of the four fundamental forces of nature, is the origin of the magnetic force, which is produced by the movement of charges. Any two charge-containing objects travelling in the same direction are attracted to one another magnetically.

The electromagnetic force, one of the four basic forces of nature, produces the magnetic force, which is caused by the movement of charges. A magnetic attraction draws two charge-containing objects together when they are moving in the same direction.

to learn more about magnetic field go to -

https://brainly.com/question/7802337

#SPJ4

Answer:

The standards establish guidelines for English language arts (ELA) as well as for literacy in history/social studies, science, and technical subjects.

Explanation:

Answer:

A

Explanation:

Answer:

4Kg

Explanation:

1/2mv²=K.E

1/2m×3²=18J

1/2m×9=18

9m=18×2

9m=36

m=36/9

m=4Kg

Answer:

F=MA FORSE= MASS X ACCELERATION

Explanation:

So the answer should be 54 as 18 X 3 = 54

( I read the question wrong)

The correct option is A.

The advantage of using the scientific method is that it is having a well-cautious building of evidence-based understanding that is dependable and logical.

The scientific method includes rigorous observation in addition to logic as a system of reasoning for organizing but for deducing beyond what is known from observation. Induction, prediction, and analogy are only a few examples of different reasoning techniques.

Evidence, as used in legal contexts, is generally defined as information, facts, or data that supports (or refutes) a claim, assumption, or hypothesis. In reality, anything could qualify as proof provided it is deemed to be true, trustworthy, and pertinent.

Although scientists frequently utilize evidence in other ways, such as when applying ideas to real-world issues, scientific evidence is evidence that helps to either support or refute a scientific theory or hypothesis.

Generally speaking, scientific evidence is founded on the knowledge that has been acquired via the application of the scientific method. This indicates that the evidence's underlying assumptions have undergone testing and general acceptance in the scientific community.

Learn to know more about the scientific method at

https://brainly.com/question/17216882

#SPJ4

Explanation:

GIVEN DATA

since P(momentum)=Mass×Velocity

F = P2 -P1

t

F= Mv2-Mv1

t

F=M( v2-v1) ,(a=v2-v1)

t t

ANSWER EXPLANATION IN WORDS

That question is related to Newton's second law of motion, the question ask you to find the force it gives you a mass and a acceleration As we know that the SI unit of acceleration is newton per kilogram or metre per second square It is correct to write metre per second square instead of Newton Per kilogram because because all of them are the SI unit of acceleration so that is the answer we get 686 Newton by Force .

consider F1 = 425 N      θ1 = 55

              F2 = 5 N          θ2 = 161

            F3 = 35 N          θ3 = 320

Now, take x and y component of force

Fx = F1cos55 + F2cos161 + F3 cos320

fx= 425 * 55  + 5 * (-0.94) + 35 * 0.76

fx =242.2- 4.7+ 26.6

fx =264.1

now fy

Fy = F1sine55 + F2sine161 + F3 sine320

fy= 425 * 0.81 + 5 * 0.32 + 35 * (-0.64)

fy = 344.2+1.6-22.4

fy = 323.4

now resultant force

Fr^2= fx^2+fy^2

     = (264.1)^2 + (323.4)^2

Fr= 417

now, consider F1 = 425 N      θ1 = 55

              F2 = 5 N          θ2 = 161

            F3 = 35 N          θ3 = 320

Now, take x and y component of force

Fx = F1cos55 + F2cos161 + F3 cos320

fx= 425 * 55  + 5 * (-0.94) + 35 * 0.76

fx =242.2- 4.7+ 26.6

fx =264.1

now fy

Fy = F1sine55 + F2sine161 + F3 sine320

fy= 425 * 0.81 + 5 * 0.32 + 35 * (-0.64)

fy = 344.2+1.6-22.4

fy = 323.4

now resultant force

Fr^2= fx^2+fy^2

     = (264.1)^2 + (323.4)^2

Fr= 417

now, resultant angle

tan θ =fy/fx

  = 323.4/264.1

tan θ = 1.2

θ =0.020

To know more about resultant force    visit : https://brainly.com/question/16380983

#SPJ4

The percent error in your measurement is 2.95 % error.

here it is for the reason that the actual value is 9.81 [tex]m/s^{2}[/tex].

And the calculated value is 10.1 [tex]m/s^{2}[/tex].

Error = 10.1-9.81

        = 0.29

Now percentage error = [tex]\frac{0.29}{9.81}*100[/tex]

                                   = 2.95 %

So, the required error is 2.95 percent.

To degree the percent errors within the given records we should have the idea of percent and error calculation.

To measure the error we should calculate the difference in the real price and the calculated fee.

And to calculate the proportion we ought to divide the received error cost by using the actual price and multiply by means of a hundred.

To learn more about percentage visit the link:

https://brainly.com/question/28269290

#SPJ4

Yes, because it incorporates a second clarifying quotation from the expert, adding more weight to the argument presented in phrase 9.

Within a group of diplomats, negotiations and bargaining essentially consist of trying to get more than you are likely to get by negotiating, and eventually reaching a compromise. On occasion, foreign officials will join ongoing negotiations for assistance. Because it advances the interests under its purview and strengthens nations, states, and organizations, diplomacy is significant. The primary tool of foreign policy, which stands for the more general objectives and plans that direct a state's relations with the rest of the world, is diplomacy. Diplomatic negotiations and processes typically lead to international treaties, accords, alliances, and other manifestations of foreign policy. Diplomats may also provide government with advice to assist form a state's foreign policy.

To know more about diplomacy refer to https://brainly.com/question/20493093

#SPJ4

The length of RG, given the data from the question is 14

From the question given above, the following data were obtained:

We can obtain the length of RG as illustrated below:

Length of PG = Length of PR + Length of RG

Thus,

Length of RG = Length of PG - Length of PR

Length of RG = 16 - 2

Length of RG = 14

Therefore, we can conclude that the length of RG is 14

Learn more about length of line:

https://brainly.com/question/11114565

#SPJ1

True, the length of the eye and the curvature of the cornea determine the refractive error of an eye. Hyperopia, or farsightedness, is produced by a shorter-than-normal eye.

With farsightedness (hyperopia), a common visual issue, you may be able to see far objects clearly but have hazy vision of nearby items.

Your ability to focus is influenced by how farsighted you are. People with severe farsightedness might only be able to see objects that are far away clearly, whereas people with mild farsightedness might be able to see objects that are nearby clearly.

Being farsighted can mean:

Nearby objects might seem hazy

Squinting is required to see clearly.

You experience eye pain or discomfort around the eyes as well as eyestrain.

After performing close work, such as reading, writing, using a computer, or sketching, for a while, you have general eye discomfort or a headache.

Your cornea or lens must be uniformly and smoothly bent to allow light to pass.

You have a refractive error if your cornea or lens are not uniformly and smoothly curved, which causes improper light refraction.

When your cornea is overly flat or your eyeball is shorter than normal, you develop farsightedness. Nearsightedness has the opposite impact.

To know more about hyperopia visit:

https://brainly.com/question/25676535

#SPJ4

In cold:

An object's temperature is a measure of how much its atoms move — the colder an object is, the slower the atoms are.

In heat:Heating a substance makes its atoms and molecules move faster. This happens whether the substance is a solid, a liquid, or a gas.

A. Equipment grounding conductor B. Hot (phase) conductor C. Grounded (white) conductor

Silver-colored screw is matched with C) Grounded (white) conductor

Brass-colored screw is matched with B) Hot (phase) conductor

Green hexagonal screw is matched with A) Equipment grounding conductor.

A substance or material that permits the flow of electricity is known as an electrical conductor.

When a voltage is applied, electrical charge carriers, typically electrons or ions, move easily from atom to atom.

There are four different types of conductors: good conductors, semiconductors, resistors, and non-conductors.

Metals are effective electrical conductors. One or more loosely bonded valence electrons, or even just one, can be found in metals. These electrons can freely flow around an electric circuit, creating a domino-like effect.

To know more about circuit conductors, visit:

https://brainly.com/question/14176453

#SPJ4

The tension on the wire is 52.02N.

Using the formula:

[tex]v = \sqrt{\frac{T}{u} }[/tex]

where, v = speed of sound wave

           T = tension in wire

           μ = mass per unit length

The area of aluminium wire is : [tex]\frac{\pi d^{2} }{4}[/tex]

Area = 1.66×[tex]10^{-5}[/tex][tex]m^{2}[/tex]

and μ = ρA = 2700×1.66×[tex]10^{-5}[/tex]

μ = 0.045kg/m

Therefore, tension is :

[tex]v = \sqrt{\frac{T}{u} }[/tex]

[tex]34^{2} = \sqrt{\frac{T}{0.045} }[/tex]

Solving for T we get, T = 52.02N.

Therefore, the tension on the wire is 52.02N.

Learn more about tension on the wire here:

https://brainly.com/question/15568310

#SPJ4

Answer:

proton = charge is + (positive charge)

neutron = charge is 0 ( no charge - neutral)

electron = charge is - (negative charge)

hope this is what you meant :)

The magnitude of the force along ac is 322.97 lb and the design angle of the system is ϕ = 38.26°

The Given problem can be solved on the Parallelogram law of vector addition and law of sines,

from the figure, we can write

F = √(400² + 600² - 2(400 × 600)cos 30)

F = 322.97 lb

In order to get the design angle, we will solve by:

(sinϕ)/(sin 30) = 400/322.97, where ϕ is the design angle.

therefore

sinϕ = (400/322.97) × sin 30

sinϕ = 1.2385 × 0.5

sinϕ = 0.61925

ϕ = sin^(-1) 0.61925

ϕ = 38.26°

To know more about the addition of vectors  refer to the link https://brainly.com/question/12937011?referrer=searchResults.

To know more  about the law of sines refer to the link https://brainly.com/question/17289163?referrer=searchResults.

#SPJ4

At one location in the orbit, the altitude is 10,000 km.

Its perigee is the monthly location where it comes closest to Earth (this varies throughout the year).

The Moon’s apogee is the location where it is each month when it is the furthest away from Earth (this varies throughout the year as well).

The location on an object’s orbit around the earth that is furthest from the planet’s core, such as a satellite.

The distance at which an object orbiting a planet or satellite (like the moon) reaches that point.

To know more about Apogee and perigee visit:

https://brainly.com/question/14704879

#SPJ4

According to the given question distance between these two points is 1.971m.

The distance can be a literal length as defined by physics or a general estimation based on other variables.  It is a generalization of the idea of physical distance. Distance is a non-numerical unit of measurement in psychology and the social sciences; psychological distance is the separation of an object from itself along dimensions including time, space, and isolation.

According to the question:

speed=frequency*wavelength

wavelength = 340/140 =2.428 m

phase difference=2pi× x/lamda

x=5.1*2.428/(2*pi)

x=1.97m

since v= f × wavelength

where v = speed of sound  and f = frequency

therefore wavelength  = v/f  = (340)/140 = (17/7)m

now, since Phase angle = (2×pi/wavelength)×shift

or, shift = phase angle × (wavelength/2×pi) = 5.1 × ((17/7)/2×pi) = 1.971m

Hence, the distance between these two points = 1.971m

To know more about distance, visit:

https://brainly.com/question/15172156

#SPJ4

In order to prevent overloading of any circuit, dual rail electrical supply includes independent tracks and P C B traces that are used to offset voltage sags between various circuits.

Using conductive paths, tracks, or signal traces etched from copper sheets laminated onto a non-conductive substrate, a printed circuit board, or PCB, is used to mechanically support and electrically link electronic components.

Semiconductors are used by practically all inverters to generate a controlled power output. An input voltage is rectified if the source has an ac input.

It is, therefore, the proper response.

To learn more about DC power, click the following link:

https://brainly.com/question/14506323

#SPJ4

When two objects of different temperatures come into contact with each other, equilibrium is reached and energy is transferred from the hotter object to the cooler object until the objects reach thermal equilibrium (that is, they are at the same temperature).  

When one object heats another, the increase in the temperature of one object is not always the same as the decrease in the temperature of the other, because the specific heat of one object is higher than the other.

Objects exchange thermal energy until they are at the same temperature. When two objects with different temperatures come into contact, they eventually achieve the same temperature. This is because of the thermal equilibrium.

Heat Transfer: Heat Transfer from Warmer Object to Cooler Object - When two substances at different temperatures are mixed, heat is transferred from a hotter object to a cooler object until the same temperature is reached (zero law of thermodynamics) - thermal equilibrium).

Learn more about Thermal Equilibrium here:

https://brainly.com/question/14556352

#SPJ9