Use F = 1/T as your basis:
9. Find the frequency of a tuning fork that takes 2.50×10−3s to complete one oscillation.

The answer is 400 Hz but please show your work.

Answers

Answer 1
Time Period=T=2.5×10^{-3}s

Now

Frequency:-

[tex]\\ \rm\rightarrowtail \nu=\dfrac{1}{T}[/tex]

[tex]\\ \rm\rightarrowtail \nu=\dfrac{1}{2.5\times 10^{-3}}[/tex]

[tex]\\ \rm\rightarrowtail \nu=0.4\times 10^{3}[/tex]

[tex]\\ \rm\rightarrowtail \nu=400Hz[/tex]

Answer 2

The frequency for this time will be 400 Hz.

What is the frequency?

Frequency is defined as the ratio of the number of waves to time. It is denoted by f.

f=[tex]\frac{1}{T}[/tex] where,

f is the frequency and,

T is the time period.

SI unit of frequency is Hz.

There are different types of frequency in sound :

Infrasonic-The frequency is less than 20 Hz.Audible-The frequency is between 20Hz to 20,000 Hz.Ultrasonic-The frequency is greater than 20,000 Hz.

According to the question :

Given :

T= 2.50×[tex]10^{-3}[/tex]

f=[tex]\frac{1}{T}[/tex]

⇒f=1/(2.50×[tex]10^{-3}[/tex])

⇒400 Hz

Hence, the frequency for this time will be 400 Hz.

For more information about frequency :

https://brainly.com/question/5102661

#SPJ2


Related Questions

Where in their life cycle are stars on the main sequence?.

Answers

Answer ,,a main sequence stars burns through the hydrogen in it's core

Explanation:

When the stars go out

Eventually,reaching the end of its life cycle. At this point, it leaves the main sequence. Stars smaller than a quarter the mass of the sun collapse directly into white dwarfs

The magnetic flux through a coil of wire containing two loops changes at a constant rate from -58 wb to 38 wb in 0. 34 s. What is the emf induced in the coil?

Answers

Since the magnetic flux through a coil of wire containing two loops changes at a constant rate from -58 wb to 38 wb in 0. 34 s, the emf induced in the coil is -5.65 V

Induced emf in coil

The induced emf in the coil is given by ε = -NΔΦ/Δt where

ΔΦ = change in magnetic flux Φ₂ - Φ₁ where Φ₁ = initial magnetic flux = -58 Wb and Φ₂ = final magnetic flux = 38 Wb and and Δt = change in time = t₂ - t₁ where t₁ = initial time = 0 s and t₂ = final time = 34 sand N = number of loops of coil = 2

Since ε = -NΔΦ/Δt

ε = -N(Φ₂ - Φ₁)/(t₂ - t₁)

Substituting the values of the variables into the equation, we have

ε = -N(Φ₂ - Φ₁)/(t₂ - t₁)

ε = -2(38 Wb - (-58 Wb))/(34 s - 0 s)

ε = -2(38 Wb + 58 Wb)/(34 s - 0 s)

ε = -2(96 Wb)/34 s

ε = -192 Wb/34 s

ε = -5.65 Wb/s

ε = -5.65 V

So, the emf induced in the coil is -5.65 V

Learn more about induced emf in coil here:

https://brainly.com/question/13051297

The electrical action generated by a non-electrical source, measured in volts. The emf induced in the coil is -564.7 V.

What is EMF?

The electrical action generated by a non-electrical source, measured in volts, is referred to as emf or electromotive force. Devices, such as batteries or generators, generate an emf by converting various sources of energy into electrical energy.

The emf induced in a coil is given by

[tex]\varepsilon = \dfrac{-N \times \triangle \phi}{ \triangle t}[/tex]

where

ΔΦ is the change in magnetic flux, Δt is the change in time, and N is the number of loops.

Given that the initial magnetic flux is -58 Wb while the final magnetic flux is 38 Wb. Also, the change in time is 0.34 seconds and the number of loops is 2. Therefore, the emf induced can be written as,

[tex]\varepsilon = \dfrac{-N \times \triangle \phi}{ \triangle t}[/tex]

[tex]\varepsilon = \dfrac{-(2) \times [38-(-58)]}{0.34}\\\\\varepsilon = -564.7\rm\ V[/tex]

Hence, the emf induced in the coil is -564.7 V.

Learn more about EMF:

https://brainly.com/question/15121836

#SPJ4

.
Which object has a constant speed?

a bicycle coming to a stop
a racecar starting a race
a ball falling off a table
a car traveling the speed limit

Answers

A car traveling the speed limit. Constant speed doesn’t have acceleration.

It wouldn’t be the first option because the bicycle is stopping.

Not the second because when a race car starts a race, they accelerate incredibly to begin driving the second they’re allowed to

Explain the terms boiling and boiling point.
How is the volume of water affected when it boils at 100°C.?


Don't spam.. ​

Answers

The particular temperature at which vaporisation occurs is known as the boiling point of liquid. Volume of water increases when it boils at 100° C. 1 cm3 of water at 100 ° C becomes 1760 cm3 of steam at 100 ° C.

Hope it helps!!!!!!!!!!!!!!!!!!!!! ~~~~~~~~~~~~~~~~~~~

ಥ‿ಥ

I will be giving the brainliest to whoever.What is the PERCENT efficiency if a computer is supplied with 500 J of energy and is able to convert 400 J to useful energy?
A. 0.8 %
B. 8 %
C. 80 %
D. 800 %

Answers

The computer will be 0.8 % efficient when 500 J is supplied (input) with 400 J converted (output)

what is the result of ocean acidification

Answers

Answer:

Ocean acidification reduces the amount of carbonate, a key building block in seawater. This makes it more difficult for marine organisms, such as coral and some plankton, to form their shells and skeletons, and existing shells may begin to dissolve.

Answer:

The intake of carbon dioxide (CO2) from the atmosphere causes ocean acidification, which is the continual decline in the pH value of the Earth's oceans. The burning of fossil fuels by humans is the primary cause of ocean acidification. The amount of carbon dioxide absorbed by the ocean grows in lockstep with the amount of carbon dioxide in the atmosphere. This causes a sequence of chemical reactions in the seawater, which has a negative impact on the, however, their rine life that lives beneath the surface. Carbonic acid is formed when carbon dioxide dissolves in seawater (H2CO3). The pH value of the ocean surface is estimated to have decreased from approximately 8.25 to 8.14 between 1751 and 1996, representing a nearly 30% increase in H+ ion concentration in the world's oceans (note that the pH scale is logarithmic, so a change of one pH unit equals a tenfold change in H+ ion concentration). The pH of the ocean in 2020 will be 8.1, according to the National Oceanic and Atmospheric Administration.

Explanation:

A regulation 145 g baseball can be hit at speeds of 100 mph. If a line drive is hit essentially horizontally at this speed and is caught by a 65 kg player who has leapt directly upward into the air, what
horizontal speed does he acquire by catching the ball?

Answers

This question involves the concept of the law of conservation of momentum.

The horizontal speed acquired by catching the ball will be "0.223 mph".

Law of Conservation of Momentum

According to the law of conservation of momentum applied in horizontal direction:

Total Initial Momentum = Total Final Momentum

[tex]m_1u_1+m_2u_2=m_1v_1+m_2v_2[/tex]

where,

m₁ = mass of baseball = 145 g = 0.145 kgm₂ = mass of player = 65 kgu₁ = initial horizontal speed of baseball = 100 mphu₂ = initial horizontal speed of player = 0 mphv₁ = final horizontal speed of baseball = 0 mphv₂ = final horizontal speed of player = ?

Therefore,

[tex](0.145\ kg)(100\ mph)+(65\ kg)(0\ mph)=(0.145\ kg)(0\ mph)+(65\ kg)(v_2)\\\\v_2=\frac{14.5\ kg.mph}{65\ kg}\\\\[/tex]

v₂ = 0.223 mph

Learn more about the law of conservation of momentum here:

https://brainly.com/question/1113396

This is less an answer more like the answers that should be it.

A) 9.9 cm/s

B) 5.6 cm/s

C) 11.8 cm/s

D) 4.2 cm/s

Daryl uses a microphone connected to an oscilloscope to study sound waves. He finds that higher pitched sounds have higher frequencies and shorter wavelengths while lower pitched sounds have lower frequencies and longer wavelengths. Daryl concludes that the relationship between the frequency and the wavelength of sound waves in air is the result of causation and not correlation. In two to three sentences, describe whether Daryl’s conclusion is correct and explain why or why not.

Answers

Daryl’s conclusion that the relationship between the frequency and the wavelength of sound waves in air is the result of causation is correct.

What is Causation?

This is defined as the relationship between successive events when the first event brings about the other.

The higher frequencies brings about shorter wavelengths which is why it is termed as being  a result of causation.

Read more about Causation here https://brainly.com/question/9583324

One source error is __________, and one of its solutions is having a lie scale inserted into the assessment. a. social desirability bias b. deliberate deception c. response bias d. response set please select the best answer from the choices provided a b c d

Answers

One source error is deliberate deception and one of its solutions is having a lie scale inserted into the assessment.]

What is the error?

An error is a mistaken or erroneous action. In some contexts, an error is interchangeable with a mistake.

The discrepancy between the calculated value and the correct value is referred to as an "error" in statistics.

When a person is completely aware of what they are doing, they are engaging in deception. They are concealing the truth and making a deliberate decision to tell someone something that is false.

When describing a magic trick, such as a sleight of hand, the term deception can also be used.

When there are repetitive questions that ask the same questions over and over with different formats to check if the responses are constant over time, lie scales are utilized.

Hence one source error is deliberate deception and one of its solutions is having a lie scale inserted into the assessment.

To learn more about the error refer to the link;

https://brainly.com/question/13286220

Which is NOT a part of transverse waves?
A. wavelength
B. trough
C. compression
D. crest

Answers

Answer:

C. Compression

Explanation:

✧✧✧EMOTIONAL DAMAGE✧✧✧

kleann

PLEASE HELP!!!



With upward speeds of 12.5 m/s, the elevators in the Yokohama Landmark Tower in Yokohama, Japan, are among the fastest elevators in the world. Suppose a passenger with a mass of 70.0 kg enters one of these elevators. The elevator then goes up, reaching full speed in 4.00 s. Calculate the net force that is applied to the passenger during the elevator's acceleration.

Answers

The net force that is applied to the passenger during the elevator acceleration is 218.75 N.

What is net force?

This is the single force obtained from the combinatiion of two or more forces

To calculate the net force that is applied to the passenger during the elevator's acceleration, we use the formula below.

Formula:

F = m(v-u)/t............ Equation 1

Where:

F = forcem = massv = Final velocityu = initial velocityt = time.

From the question,

Given:

m = 70 kgu = 0 m/sv = 12.5 m/st = 4 s

Substitute these values into equation 1

F = 70(12.5-0)/4F = 218.75 N

Hence, The net force that is applied to the passenger during the elevator acceleration is 218.75 N.

Learn more about net force here: https://brainly.com/question/13370981

The _____ acceleration is deceleration​

Answers

Answer:

hello.

Negative acceleration is also called deceleration.

Explanation:

If the velocity of the object does not change with time, it has zero acceleration.

Hello people ~
The frequency of subsonic sound is
(a) more than 20 Hz
(b) 100 Hz
(c) less than 20 Hz
(d) more than 20,000 Hz

Answers

less than 20 Hz

The frequency of subsonic sound is less than 20 Hz

subsonic sound refers to a sound which has a wave that travels slower than the speed of sound.

frequency of audible sound: 20 Hz to 20,000 Hz

Thus subsonic sound < 20 Hz

Answer:

less than 20Hz

Explanation:

Human ears can hear sounds coming in range of 20Hz to 20000Hz or 20kHz.Low or beneath is not audible.

Bats can hear below 20Hz ,so they use this to travel in air

A student watches the tide change, and sees water waves pass the end of the dock
that follow the pattern shown below:
13)
The student counts the waves with a stopwatch, and determines that it takes 8.75
seconds for a single wave to go by. The wave frequency is ----

Answers

The frequency of the wave at the given period is 0.114 Hz. This frequency shows the number of revolution of the wave in a second.

What is frequency of a wave?

The frequency of a wave is the number of revolutions of the wave per second.

Frequency of a wave is determined by taking the inverse of period of the wave.

The frequency of the wave at the given period is calculated as follows;

f = 1/T

Where;

f is the frequencyT is period of the wave

f = 1/8.75

f = 0.114 Hz

Thus, the frequency of the wave at the given period is 0.114 Hz.

Learn more about frequency of wave here: https://brainly.com/question/10728818

a measuring cylinder has a mass of 180g when empty. When a liquid is poured into the cylinder, the level rises to the 95m³ mark. Total mass is now 292g. What is the density of the of the liquid in g/cm³​

Answers

Answer:

d (density) = m / V = (292 - 180) g / 95 cm^3 = 1.18 g / cm^3

(water is 1 gm / cm^3)

When a thermometer is emersed in ice cold water, the Mercury thread is observed to rise before dropping steadily in the capillary tube. Explain

Answers

The molecules of the red liquid within the thermometer move faster when heated. When the thermometer is submerged in cold water, the molecules slow slowly, and their attractor forces them closer together, causing them to fall down the tube.

more than one option this is hard

Answers

You have to select all of them bcz all of them are right

A distant astronomical object (a quasar) is moving away from us at half the speed of light. what is the speed of the light we receive from this quasar?

Answers

For a distant astronomical object (a quasar) is moving away from us at half the speed of light, the speed of the light we receive from this quasar  is mathematically given as c = 3x108 m/s

What is the speed of light?

Generally, the equation for the   is mathematically given as

The speed of light can be said to be measured to be approximately the value c = 3x108 m/s

.

In conclusion, An will not influence  3x108 m/s unless both are inertia and frames refrences where newtons laws are valid, so the speed of light measured from the earth frame is equal to  3x108 m/s

Read more about Speed

https://brainly.com/question/4931057

What is the average velocity of the fly between 0 and 15 seconds

Answers

Answer:

where is the displacement

[tex]v = \frac{s}{t} [/tex]

The average velocity of the fly between 0 and 15 seconds will be 10 m/sec.Velocity is the time-based component.

What is average velocity?

The average velocity is the ratio of the total distance traveled to the total time taken by the body. Its unit is m/sec.

From the given graph it is obsderved that the displacement from 0 to 15 seconds will be 150 m.

[tex]\rm V = \frac{D_2-d_1 }{t_2-t_1} \\\\ V = \frac{150}{15-0} \\\\ V= 10 \ m/sec[/tex]

Hence the average velocity of the fly between 0 and 15 seconds will be 10 m/sec.

To learn more about the average velocity refer to the link;

https://brainly.com/question/862972

#SPJ4

A 50 kg object moving at 15 m/s collides with another 50 kg object moving in the same direction at 10 m/s. If the collision is inelastic, what is the final velocity of the two objects after they combine?

Answers

Answer:

12.5 m/s

Explanation:

By conservation of momentum, we have that:
[tex]\displaystyle m_1v_1 + m_2v_2 = m_1v_1' + m_2v_2'[/tex]

Because the two objects combine after collision, they will have the same velocity:

[tex]\displaystyle m_1v_1 + m_2v_2 = (m_1+m_2)v_f[/tex]

Substitute and solve for final velocity:

[tex]\displaystyle \begin{aligned} (50 \text{ kg})(15\text{ m/s}) + (50\text{ kg})(10\text{ m/s}) & = ((50+50)\text{ kg})v_f \\ \\ v_f & = 12.5\text{ m/s}\end{aligned}[/tex]

In conclusion, the final velocity of the system will be 12.5 m/s.

How can gravitational tugs from orbiting planets affect the motion of a star?.

Answers

Answer:

Gravitational tugs from orbiting planets don't affect the motion of a star. The star, being much larger than the planet, has a much smaller orbit. But it does move slightly. Explain how alien astronomers could deduce the existence of planets in our solar system by observing the Sun's motion.

If a 5-kg object experiences a 10-N force for a duration of 0. 10-second then what is the impulse exerted by the force on the object? What is the momentum change of the object? What is the change in velocity for the object?

Answers

Answer:

orce = rate of change of momentum which is m a if the mass is constant

10 Newtons = change of momentum/0.10 second

so change of momentum = 1 kg m/s

by the way the change in speed would be 1/5 = .2 m/s

Explanation:

If a 5-kg object experiences a 10-N force for a duration of 0. 10-second then the impulse exerted by the force on the object would be 1 Ns, and the change in the momentum would be  1 Ns.

What is momentum?

It can be defined as the product of the mass and the speed of the particle, it represents the combined effect of mass and the speed of any particle, and the momentum of any particle is expressed in Kg m/s unit.

As given in the problem If a 5-kg object experiences a 10-N force for a duration of 0. 10-second then we have to find out what the impulse exerted by the force on the object.

P = force × time

  = 10 × 0.1

  = 1  Ns

Thus, If a 5-kg object experiences a 10-N force for a duration of 0. 10-second then the impulse exerted by the force on the object would be 1 Ns, and the change in the momentum would be  1 Ns.

To learn more about momentum from here  , refer to the link given below ;

brainly.com/question/17662202

#SPJ5

Scientists observed a rocky, rotating object orbiting in space. It was 250 km wide. The rocky object was located several times farther away from the sun than the earth

Answers

The rocky object orbiting in space is most likely referred to as an asteroid.

What is an Asteroid?

This is referred to a rocky object which revolve around the sun and are considered too small to be called a planet.

Asteroids was observed with the use of a telescope and is around 250 km wide thereby making it the most appropriate choice.

Read more about Asteroids here https://brainly.com/question/11996385

Red light has a wavelength of (7. 21x10^7)m. What is the frequency of this light?

Answers

Answer:

TO answer this question i need wave speed

Explanation:

What are the conditions necessary for a terrestrial planet to have a strong magnetic field?.

Answers

Both a molten metallic core and reasonably fast rotation.

Arm ab has a constant angular velocity of 16 rad/s counterclockwise. At the instant when theta = 60

Answers

The linear acceleration of collar D when θ = 60° is - 693.867 inches per square second.

How to determine the angular velocity of a collar

In this question we have a system formed by three elements, the element AB experiments a pure rotation at constant velocity, the element BD has a general plane motion, which is a combination of rotation and traslation, and the ruff experiments a pure translation.

To determine the linear acceleration of the collar ([tex]a_{D}[/tex]), in inches per square second, we need to determine first all linear and angular velocities ([tex]v_{D}[/tex], [tex]\omega_{BD}[/tex]), in inches per second and radians per second, respectively, and later all linear and angular accelerations ([tex]a_{D}[/tex], [tex]\alpha_{BD}[/tex]), the latter in radians per square second.

By definitions of relative velocity and relative acceleration we build the following two systems of linear equations:

Velocities

[tex]v_{D} + \omega_{BD}\cdot r_{BD}\cdot \sin \gamma = -\omega_{AB}\cdot r_{AB}\cdot \sin \theta[/tex]   (1)

[tex]\omega_{BD}\cdot r_{BD}\cdot \cos \gamma = -\omega_{AB}\cdot r_{AB}\cdot \cos \theta[/tex]   (2)

Accelerations

[tex]a_{D}+\alpha_{BD}\cdot \sin \gamma = -\omega_{AB}^{2}\cdot r_{AB}\cdot \cos \theta -\alpha_{AB}\cdot r_{AB}\cdot \sin \theta - \omega_{BD}^{2}\cdot r_{BD}\cdot \cos \gamma[/tex]   (3)

[tex]-\alpha_{BD}\cdot r_{BD}\cdot \cos \gamma = - \omega_{AB}^{2}\cdot r_{AB}\cdot \sin \theta + \alpha_{AB}\cdot r_{AB}\cdot \cos \theta - \omega_{BD}^{2}\cdot r_{BD}\cdot \sin \gamma[/tex]   (4)

If we know that [tex]\theta = 60^{\circ}[/tex], [tex]\gamma = 19.889^{\circ}[/tex], [tex]r_{BD} = 10\,in[/tex], [tex]\omega_{AB} = 16\,\frac{rad}{s}[/tex], [tex]r_{AB} = 3\,in[/tex] and [tex]\alpha_{AB} = 0\,\frac{rad}{s^{2}}[/tex], then the solution of the systems of linear equations are, respectively:

Velocities

[tex]v_{D}+3.402\cdot \omega_{BD} = -41.569[/tex]   (1)

[tex]9.404\cdot \omega_{BD} = -24[/tex]   (2)

[tex]v_{D} = -32.887\,\frac{in}{s}[/tex], [tex]\omega_{BD} = -2.552\,\frac{rad}{s}[/tex]

Accelerations

[tex]a_{D}+3.402\cdot \alpha_{BD} = -445.242[/tex]   (3)

[tex]-9.404\cdot \alpha_{BD} = -687.264[/tex]   (4)

[tex]a_{D} = -693.867\,\frac{in}{s^{2}}[/tex], [tex]\alpha_{BD} = 73.082\,\frac{rad}{s^{2}}[/tex]

The linear acceleration of collar D when θ = 60° is - 693.867 inches per square second. [tex]\blacksquare[/tex]

Remark

The statement is incomplete and figure is missing, complete form is introduced below:

Arm AB has a constant angular velocity of 16 radians per second counterclockwise. At the instant when θ = 60°, determine the acceleration of collar D.

To learn more on kinematics, we kindly invite to check this verified question: https://brainly.com/question/27126557

Amber is a
(a) metal
(b) rubber
(c) resin
(d) sugar

Answers

Answer:

c. Resin.

Explanation:

Amber is a resin.

The waves produced on the earth’s surface is called
(a) seismic wave
(b) longitudinal wave
(c) Micro wave
(d) Radio wave

Answers

Answer:

seismic wave

Explanation:

These waves are produced because of plate tectonicsThese helps are useful in measurements of earthquake.Used in seismograph.

Two objects of the same mass travel in the same direction along a horizontal surface. Object X
has a speed of 5 ms
and object Y
has a speed of 2 ms
, as shown in the figure. After a period of time, object X
collides with object Y
.

Consider the situation in which the objects collide but do not stick together. Which of the following predictions is true about the center of mass of the two-object system immediately after the collision?

Answers

After the collision, object X will move at a speed of 2 m/s in its original direction while object Y will move at a speed of 5 m/s in its original direction.

Elastic collision of the two objects

When the two objects collide but do not stick together, the type of collision is elastic collision.

In elastic collision, both momentum and kinetic energy are conserved.

Final velocity of the two objects after collsion

mu₁ + mu₂ = mv₁ + mv₂

5m + 2m = mv₁ + mv₂

m(5 + 2) = m(v₁ + v₂)

7 = v₁ + v₂ -------- (1)

Apply the concept of one direction velocity;

u₁ + v₁ = u₂ + v₂

5 + v₁ = 2 + v₂

v₂ = v₁ + 3 ------ (2)

Solve (1) and (2) together;

7 = v₁ + v₁ + 3

4 = 2v₁

v₁  = 2 m/s

v₂  = 2 + 3 = 5 m/s

Thus, after the collision, object X will move at a speed of 2 m/s in its original direction while object Y will move at a speed of 5 m/s in its original direction.

Learn more about elastic collision here: https://brainly.com/question/7694106

what does the word Cala stands for​

Answers

Answer:

Caribbean and Latin America Region

Explanation:

Other Questions
6. Higher Order Thinking The manager of a restaurant wants to add two new side dishes to the menu. She surveys customers about side dish preferences and records the results in the table shown at the right. a. Find the experimental probability that a customer prefers either baked potato or asparagus. b. Find the experimental probability that a customer prefers either steamed broccoli or sweet potato. Find the area of the figure below. Use 3.14 to approximate .Round your answer to the nearest tenth. Political conservatives in the 1960s and 1970s generally reacted to developments in united states foreign policy by:. A carpenter is making a circular tabletop with a circumference of 4.5 yards. What is the radius of the tabletop in to the nearest centimetre? helppppp I'm so lost I need to pass this class What is tris lysis buffer Your roommate has been prescribed an antibiotic for bacterial pneumonia. She is feeling better and stops taking her antibiotic before finishing the prescribed dose, telling you that she will save the remainder to take the next time she becomes sick. What can you tell your roommate to convince her that this is not a good plan? A candy maker produces 465 pounds of chocolate bites. It is placed in equal amounts into 145 empty bags. Each bag can hold up to 3 pounds. How many pounds of chocolate bites are left over after the bags are filled? The Consumer Price Index (CPI)is the tool used to measureinflation. It is calculatedthrough which of the followingmethods?A. Door-to-door surveysB. Online QuestionnareC. Census descirbe the weather conditions associated with warm and cold fronts. why do these conditions differ What was the biggest surprise with Alaska?The locationThe resourceThe costThe purchase How do you say hello in Spanish The part of the cell that can be stimulated by outside chemicals, triggering the cell tocarry out specific functions, is called theA) cell membrane receptor.B) lysosome.C) Golgi apparatus.D) endoplasmic reticulum. "Have a great family and a great home on the beach somewhere and just haveenough means to support myself with my family" Explanation Should the intent of the framers be considered when deciding the meaning of the constitution and why? Solve for area and perimeter in each of the following problems. What are the x-intercepts of this conic section?no x-intercepts(1, 0) and (1, 0)(0, 2) and (0, 2)(0, 1) and (0, 1) Do number 17 please. What kind of activity aboard the international space station was recently carried out for the 248th time?. If A Surveyor asks you a question that you dont know the answer to ,you should