Answer: Chemical reactions involve breaking chemical bonds between reactant molecules (particles) and forming new bonds between atoms in product particles (molecules). The number of atoms before and after the chemical change is the same but the number of molecules will change.
The Carbon Cycle Activity Worksheet
Instructions: Answer the questions below using the reference images. You will submit your completed worksheet.
Part One
Using the diagram above, match the description to the corresponding location in the carbon cycle model. Provide the letter only.
1. Carbon dioxide is converted to sugar used for food.
2. Carbon trapped in fossil fuels is converted to carbon dioxide.
3. Organic carbon is converted to fossil fuels.
4. Carbon dioxide is converted to carbonates.
5. Sugar is broken down and converted to carbon dioxide.
Carbon dioxide is converted to sugar in the Photosynthesis process. Carbon trappeds is converted to carbon dioxide in the Combustion proces.Organic carbon is converted to fossil fuels.
What is Organic ?Organic refers to products and processes that are grown and made without the use of synthetic chemicals, fertilizers, or genetically modified organisms. These products are grown in a way that preserves the environment, using natural fertilizers and methods that promote soil health and biodiversity. Organic food is healthier for us and for the planet, as it is free of chemicals, pesticides, and other pollutants. Organic farming often uses sustainable practices, such as crop rotation, cover crops, and integrated pest management, that reduce environmental impact.
To learn more about Organic
https://brainly.com/question/26854014
#SPJ1
What properties do you think a material should have to collect water from fog?
What criteria and constraints might be important when designing a material like this?
Answer:
Fog collection is the harvesting of water from fog using large pieces of vertical mesh netting to induce the fog-droplets to flow down towards a trough below. A material that can collect water from fog should be able to induce condensation of atmospheric water vapor from the air into droplets of liquid water. Some designs use parallel wires while others use tiny structures inspired by cactus spines.
When designing a material for collecting water from fog, some important criteria and constraints might include its ability to collect moisture efficiently under different conditions (such as cool fog or sunny conditions), its durability and cost-effectiveness. Additionally, bioinspired designs have been shown to be effective for collecting water from fog.
2CuCl + H2S → Cu2S + 2HCl
How many moles of copper I chloride, CuCl, are necessary to react completely with 4.4 moles of hydrogen sulfide, H2S?
The correct answer is that for 4.4 moles of H2S to completely react, 8.8 moles of CuCl are needed.
What is a mole?The mole is the unit for amount of substance. It is referred to as mol. The amount of material, or 1 mol, has the same number of atoms as 12.0 g of carbon-12. Since atoms are so tiny and have such a tiny mass, there are a tremendous amount of atoms in 12.0 g of carbon-12.
What, in plain terms, is a mole?Chemists employ the mole, a very significant unit of measurement. Like a dozen eggs means twelve eggs, having a mole of anything indicates you have 602,214,076,000,000,000,000,000 of that thing. For extremely small objects like atoms, molecules, or other particles, chemists must quantify using moles.
To know more about moles visit-
https://brainly.com/question/30564951
#SPJ1
help i dont understand
Geothermal power plants send water through pipes deep underground where it is hot. This causes the temperature of the water to increase.
What happens to the molecules of the water when the temperature of the water increases?
a. The energy of the water molecules decreases.
b. The energy of the water molecules increases.
c. The cold energy of the water molecules decreases.
d. More heat molecules combine with the water molecules.
Answer:
When the temperature of water in a geothermal power plant increases, the energy of the water molecules increases. Therefore, the correct answer is b. The energy of the water molecules increases.
Explanation:
What element forms an ion with a +2 charge that has an electronic configuration of
12 222632364231046 (or [Kr])?
Answer: The electronic configuration of [Kr] corresponds to the 36 electrons in the closed inner shell of a noble gas. Therefore, the ion with a +2 charge must have lost two electrons from its outermost shell.
To determine the element, we need to find which element has 2 valence electrons and can form a cation with a +2 charge. The element in question is located in Group 2 of the periodic table, which includes beryllium (Be), magnesium (Mg), calcium (Ca), strontium (Sr), barium (Ba), and radium (Ra).
Out of these elements, only magnesium (Mg) has 2 valence electrons and can form a cation with a +2 charge. Therefore, the element in question is magnesium, and the ion with a +2 charge is Mg2+.
Your welcome (:
HELP ME PLEASE. I REALLY WANT TO KNOW CHEMISTRY BUT I NEED HELP. SOME KIND SOUL PLEASE.
The reactant that is consumed first in a chemical reaction, also known as the limiting reactant (or limiting reagent), limits the amount of product that can be produced. As a result ,O2 is the limiting reactant.
What is limiting reactant ?
When a reactant is totally consumed during a chemical reaction, the amount of product that can be created is constrained.
n(Mg) = 2.8 g / 24.31 g/mol, n(Mg) = 0.1153 mol, and n(Mg) = m/M
Then, let's determine how many moles of oxygen there are:
n(O2) = 4.5 L * 1 atm / (0.08206/mol * 273.15 K) n(O2) = V(STP) * P(STP) / R * T(STP)
n(O2) = 0.1788 mol
The balanced equation states that the stoichiometric ratio of magnesium to oxygen is 2:1. As a result, 1 mole of O2 and 2 moles of Mg react.
To react with all of the O2, Mg must be present in the following amounts: n(Mg) = n(O2) / 2 n(Mg) = 0.1788 mol / 2 n(Mg) = 0.0894 mol
Since we have only 0.1153 mol of Mg, which is greater than the required 0.0894 mol, Mg is not the limiting reactant. O2 is the limiting reactant since we have only 0.1788 mol of it, which is less than the required 0.1788 mol.
To know more about reactant visit:-
https://brainly.com/question/13005466
#SPJ1
Consider the following reaction:
Al+3CuCl →→ AlCl3 + 3Cu
Identify what main category of reaction it is. If possible, further categorize it into all other relevant types
of reaction.
Synthesis
Decomposition
Combustion
Single Replacement
Double Replacement
Precipitation
Acid-Base
Oxidation-Reduction
Gas Evolving
The given reaction: Al + 3CuCl → AlCl₃ + 3Cu is a single replacement reaction.
In this reaction, aluminum (Al) replaces copper (Cu) in copper chloride (CuCl) to form aluminum chloride (AlCl₃) and copper (Cu).
Further categorizing it based on other types of reactions:
Oxidation-Reduction: The reaction is an example of oxidation-reduction or redox reaction as aluminum undergoes oxidation, losing electrons, while copper in CuCl is reduced, gaining electrons, during the reaction.
Metal displacement: It is also an example of a metal displacement reaction, as aluminum displaces copper from the copper chloride compound.
Single Displacement: It is a type of single displacement reaction because a single element (Al) replaces another element (Cu) in a compound (CuCl).
Exothermic: The reaction is exothermic because it releases heat energy during the reaction.
Non-Spontaneous: The reaction is non-spontaneous because it requires an external energy source (such as heating) to start the reaction.
Learn more about Oxidation-Reduction here:
https://brainly.com/question/28216195
#SPJ1
Balance the equations by inserting coefficients as needed.
equation 1:
Li+CO2+H2O⟶LiHCO3+H2
equation 2:
C6H12O2+O2⟶CO2+H2O
The balanced equation for Equation 1 is 2Li + CO2 + H2O ⟶ Li2HCO3 + H2 and for Equation 2 is C6H12O2 + 9O2 ⟶ 6CO2 + 6H2O.
What is C6H12O2?C6H12O2 is the chemical formula for a molecule called hexanoic acid. Hexanoic acid is a carboxylic acid with six carbon atoms in its chain and has a strong odour resembling sweaty feet or cheese. It is a fatty acid that is commonly found in dairy products.
Why is it necessary to balance the equation?It is necessary to balance a chemical equation to ensure that the law of conservation of mass is obeyed. This law states that matter cannot be created or destroyed in a chemical reaction but can only be rearranged into different combinations. Therefore, the number of atoms of each element present in the reactants must equal the number of bits of the same component of the products.
To learn more about chemicals, visit here:
https://brainly.com/question/13145357
#SPJ1
Part A
Which claim is supported by evidence in the passage?
Lewis's father was strict.
Lewis's family's troupe was successful.
Lewis was too young to remember his lines.
Lewis did not want to perform because patrons threw eggs.
Hamilton explained the choice on the On Purpose show, admitting that the pair's work connection from karting to F1 had placed a burden on an otherwise strong friendship.
Why did Lewis have a falling out with his father?Lewis Hamilton now has a close connection with his father Anthony, but this was not always the case during his Formula One tenure. Anthony had a significant influence on his son's career, notably working multiple jobs to finance Hamilton's early foray into racing until he was signed by McLaren at the age of 11.
However, his earnings outside of Formula One rose from $8 million in 2021 to $12 million in 2022. Hamilton was the highest-paid Formula One racer. He has profitable agreements with companies such as Monster energy drinks.
Learn more about Hamilton
https://brainly.com/question/31006348
#SPJ1
Write the molecular formula for a compound with the possible elements C, H, N and O that exhibits a molecular ion at M+ = 122.0374.
The molecular formula of the compound with a molecular ion at M+ = 122.0374 could be C7H10O3N.
How is a molecular formula composed?A molecular formula is the chemical representation of a molecular compound that lists the types and quantities of atoms that make up each molecule.
What is an example of a molecular formula?The chemical formula for a molecular compound molecular formula lists the variety of atoms that make up the molecule. A subscript under oxygen in CO2, for instance, indicates that there are two oxygen atoms present, but a subscript under carbon indicates that there is just one carbon atom present.
How are moles of mass converted?By dividing the mass by the formula mass expressed in g/mol, one can determine the number of moles in a given quantity of substance.
To know more about the molecular formula visit:
https://brainly.com/question/8201330
#SPJ1
How many grams of hydrogen gas would be needed to form 8.0 grams of water?
Here is your balanced equation: 2H2 + O2 → 2H2O
Answer: 72g
Explanation:
How many moles of carbon dioxide will be produced if 4 moles of ethane are burned in the presence of oxygen? PLEASE SHOW WORK!!
2 C₂H6+5 02 --> 4 CO2 + 6 H₂O
a. 4 moles
b. 6 moles
c. 8 moles
d. 12 moles
Answer:
Explanation:
This requires using the mol/mol ratio of the balanced equation to solve.
Start with the given number of moles, cancel those and then multiply by the moles of CO2.
4 mol C2H6 x 4 mol CO2 = 8 moles of CO2 produced
2 mol C2H6
Question 2 (10 points)
A hypothetical bird species is purple due to a purple pigment in their feathers. A random mutation in the gene that codes for the purple pigment protein results in one individual white bird.
A
Explain the connection between genes, proteins and traits using this example. Make sure you explain each step. What is the name of the dogma that explains this connection?
Answer:
Genes are segments of DNA that contain instructions for the production of specific proteins. Proteins are the molecules that perform various functions in cells and organisms, such as providing structural support, transporting molecules, and catalyzing chemical reactions.
In the case of the hypothetical bird species, the gene that codes for the purple pigment protein is responsible for producing the purple pigment in the bird's feathers. When a random mutation occurs in this gene, it can affect the production of the pigment protein. In the case of the white bird, the mutation likely results in a non-functional protein that cannot produce the purple pigment, resulting in white feathers.
This process of genes producing proteins, which in turn determine the traits of an organism, is known as the central dogma of molecular biology. The central dogma states that genetic information flows from DNA to RNA to protein, and that the sequence of nucleotides in DNA determines the sequence of amino acids in proteins, which in turn determine the structure and function of the protein and ultimately the traits of the organism.
Explanation:
What is the mass in grams of 15 moles of Fe2O3.
Explanation pls and thank you
The mass of 15 moles of Fe2O3 can be calculated by multiplying the molar mass of Fe2O3 (159.69 g/mol) by 15 moles. The total mass in grams is 2395.35 g.
Calculation of molar mass of a substanceThe molar mass of a substance is the mass of one mole of that substance, which is equal to the sum of the atomic masses of all the atoms in the molecule. In the case of Fe2O3, the molar mass is equal to the sum of the atomic masses of iron (55.845 g/mol) and oxygen (15.999 g/mol) multiplied by two oxygen atoms and three iron atoms, which is 159.69 g/mol.
To calculate the mass in grams of 15 moles of Fe2O3, we simply multiply 159.69 g/mol by 15 moles, which yields a total mass of 2395.35 g.
Learn more about molar mass here:
https://brainly.com/question/837939
#SPJ1
If a new element was discovered with an atomic number of 119, how many energy levels (shells) would you expect it to have according to the trends on the periodic table? How many valence electrons?
"If a new element with an atomic number of 119 were to be discovered, it would be located in the seventh row of the periodic table, in the period or row that contains elements with atomic numbers 113 to 118.
According to the trends on the periodic table, the seventh row of the periodic table should have 7 energy levels or shells. This is because the number of shells in an atom is equal to the period or row number of the element in the periodic table.
For the valence electrons, we need to look at the group or column that the element would belong to. Since it is a new element, it is not yet known what its chemical properties are or what group it would belong to. However, based on the trends in the periodic table, elements in the same group have the same number of valence electrons.
If we assume that this new element belongs to group 1, which is the alkali metal group, then it would have 1 valence electron, like all the other elements in that group. If it belongs to group 18, which is the noble gas group, then it would have 8 valence electrons, with the exception of helium which has only 2 valence electrons.
It is important to note that the properties of this hypothetical new element are not yet known and the number of energy levels and valence electrons may differ from what is predicted based on periodic trends." (ChatGPT, 2023)
PLEASEEEEEEEEEEEEEEEEEEEE HELP WILL GIVE A BRAINLIST !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Wet Lab: Investigating Fields
Points Possible: 50
In this lab, you will explore magnetic and electric forces. You will gather data to show how these noncontact forces affect objects in fields. You will investigate the magnetic field between two bar magnets. You will also investigate the electric field between two electrically charged pieces of tape. The tape will become charged when you peel it off another object.
Part 1: Exploring Magnetic Fields (16 points)
1. Tape one magnet to a smooth, flat surface. Place the other magnet on that surface 10 cm away, oriented so that its north pole is facing the south pole of the other magnet. Slowly push the free magnet toward the magnet that is taped down. What do you observe? (1 point)
2. Gently push the free magnet toward the taped magnet again. How far apart are they when the free magnet first starts to be pulled? Use the ruler to measure the distance between the magnets. (1 point)
3. Repeat Steps 1 and 2, but this time, position the magnets so that their north poles are facing each other. At what distance do the magnets begin to repel each other? (2 points)
4. Place the free magnet in each of the positions shown in the table below. For each position, describe what happens after you let go of the magnet. Draw a diagram that shows the final positions of both magnets. Make sure to label the north pole (N) and south pole (S) of each magnet. (12 points)
Magnetic Fields Data Table
Original magnet positions Final magnet positions Observations
Magnet diagram
Magnet diagram
Magnet diagram
Magnetic diagram
Magnetic diagram
Magnet diagram
Part 2: Exploring Electric Fields (16 points)
5. Cut four pieces of tape that are 15 cm long. Fold over one end of each piece of tape to make a tab that is about 2 cm long.
6. Stick one piece of tape to the top of a smooth, flat table. Using a marker, label the tab "B1." Rub the tape with the side of the marker to smooth out any air bubbles. Stick a second piece of tape on top of the first and smooth out the air bubbles again. Label the tab of this piece "T1."
7. Repeat Steps 5 and 6 with the remaining two pieces of tape, but label the bottom tab "B2" and the top tab "T2."
8. Use the tab to peel T1 off of B1. Stick it vertically to the edge of the table so that the tab is at the top and the tape hangs down below the table. Then peel B1 off the table. Hang it from the table edge in the same way. The two pieces of tape must be at least 10 cm away from each other and from the legs of the table.
9. Peel off T2. Hold it by the tab with the sticky side facing you.
10. With your other hand, hold a ruler perpendicular to the table edge, with the zero mark against the table next to the tape labeled T1. Hold the tab of T2 at the other end of the ruler. The diagram shows how to arrange the tape and the ruler. Slowly move T2 along the ruler toward T1. Watch for a change at the bottom end of each piece of tape. Measure the distance between the top ends of the pieces of tape when you first notice the change. What happened? Continue moving T2 closer to T1. What happened? Record the distance and your observations in the Electric Fields Data Table provided below Step 12. (4 points)
Diagram of electrical fields experiment, with table, ruler, and tape. Text: Table, Ruler, T1, B1, T2.
11. Repeat Step 10, this time moving T2 toward the hanging piece of tape labeled B1. (4 points)
12. If any of the pieces of tape are stuck together, carefully pull them apart. Discard the piece of tape labeled T2. Then repeat Steps 9 – 11 using the piece labeled B2 that is still stuck to the tabletop. (8 points)
Electric Fields Data Table
Pieces of tape Distance of first change (cm) Observations
T1 and T2
B1 and T2
T1 and B2
B1 and B2
Analysis and Conclusions (18 points)
1. What can you conclude about magnetic force based on your results in Steps 1 – 3? Use your data to support your conclusions. (4 points)
2. A magnetic field is the area around a magnet where its force can be felt. Magnetic fields are invisible. How did Part 1 of the Procedure and Data section provide evidence that magnetic fields exist? (4 points)
3. How could you change the design of the experiment to determine the size of the magnetic field around the magnet that was taped down? (2 points)
4. In Part 2 of the Procedure and Data section, how did the pieces of tape affect each other? Why did they attract, repel, or have no effect on each other? (4 points)
5. Like magnetic fields, electric fields are invisible. How did the experiment allow you to gather evidence that electric fields exist? (4 points)
The free magnet will gradually feel a pull toward the magnet that is fixed when it is brought slowly toward the magnet that is affixed.
What is in a magnetic field?Inside an iron rod, there are hardly any magnetism regions. When a powerful magnet is present, these domains align with the preponderance of the north seeking ends going in the same direction. This occurrence causes the polarities to be different. A magnet has a pole that faces south on one end and a pole that faces north on the other. Because the Antarctic area has historically been referred to as the South Pole and because the Earth is thought to contain a strong magnet, this phrase is used as a point of reference.
Two magnet magnets that are opposed to one another are attracted to one another. When like sides are forced together, a force of repulsion is produced. In a magnetic field, opposite poles attract and similar poles resist one another.
The free magnet will gradually experience a draw to the magnet that is fixed when it is gently moved toward the magnet that is fixed and taped. The power of attraction grows as the opposite sides get closer to one another.
Learn more here magnetic field
https://brainly.com/question/14848188
#SPJ1
Please I need answers now
the answer is in the image above
HELPPP PLSS
the screenshot is attached. it has it all there
The equation shows that for every two atoms of sodium (Na) in the reactants. Therefore,Na atom is the same, while N atom is two and N atom in the products is three.
What is atom ?Atom is a free and open-source text and source code editor created by GitHub. It is available for macOS, Linux, and Microsoft Windows. It is a desktop app built using web technologies such as JavaScript, HTML, and CSS. Atom provides features such as syntax highlighting, autocompletion, project management, a built-in package manager, and embedded Git control. It also offers integration with a variety of other tools and services, such as GitHub.
To learn more about atom
https://brainly.com/question/26952570
#SPJ1
Humanity faces major global challenges today which can be addressed through the engineering of major technological systems. Engineers continuously modify these technological systems by applying scientific knowledge and engineering design practices to increase benefits while decreasing costs and risks. These modifications and innovations lead to new types of energy solutions.
Using the knowledge you have built over this unit so far, how do you think the United States should be creating energy?
Include the type or types of energy sources you choose (2pts)
Justify your reasoning for why your chosen type is beneficial (2 pts)
Use complete sentences and a persuasive voice. (1 pt)
This should be a paragraph long (3-6 sentences)
Answer:
Based on the current state of technology and the environmental concerns, the United States should be heavily investing in solar and wind energy sources to create energy. Solar and wind power are renewable and environmentally friendly sources of energy that can provide a sustainable solution to the energy crisis. Unlike fossil fuels, solar and wind energy do not produce harmful greenhouse gases or contribute to climate change. They also have a lower risk of environmental disasters than nuclear power or oil spills from offshore drilling. Solar and wind power are also becoming increasingly cost-effective, and their prices are continuously dropping, making them more accessible and affordable to consumers. Investing in solar and wind energy can lead to job creation, energy independence, and a more sustainable future for the United States. Therefore, the United States should prioritize the adoption of solar and wind energy to meet the increasing demand for energy while mitigating the negative impacts of traditional energy sources.
)The students continued their experiments on force fields, this time investigating magnetism. One group student set up the demonstration you see here. "Oh wow!" Sarah exclaimed. "It's magic!" Is it magic? Which statement best explains how the center magnet is able to hover between two other magnets?A)The magnets are stacked so that like poles are facing one another.B)The opposite poles of each magnet are facing each other so they repel.C)The middle magnet is repelling the top magnet while attracting the bottom.D)The middle magnet is attracted to the top magnet but pulled down by gravity.
The middle magnet is repelling the top magnet while attracting the bottom magnet, which is the proper explanation for how the centre magnet is able to hover between the two other magnets.
How can you demonstrate through experiments that the majority of a magnetic act's magnetic strength is located close to its poles?Get a bar magnet and set a steel pin far away. Next, we find that nothing happens, but when we move the steel pin close to a bar magnet's pole, we see that the pin adheres to the magnet's poles. This experiment demonstrates that the magnet's poles experience the most magnetic force.
How will you experimentally demonstrate that a magnet's power is greatest near its end?They are covered by a bar magnet that is lifted up. You'll see that the magnet's ends have a higher concentration of iron filling than its other portions, which leads us to the conclusion that its ends have the greatest magnetic strength.
To know more about magnet visit:-
https://brainly.com/question/28315393
#SPJ1
з сасоз+2fepo4 → саз(po4)2+Fe2(CO3)3
How many grams of calcium phosphate
are produced from 26 grams of (Iron Ill)
phosphate and 12.1 grams of calcium
carbonate. what is the excess reactant
Answer:
A. Excess reactant is FePO4
B. mass of Ca3(PO4)2 produced is 12.41g
Explanation:
A. FePO4 has molar mass of 150.82 g/mol => 26/150.82 = 0.17 mole
CaCO3 has molar mass of 100.09 g/mol => 12.1/100.09 = 0.12 mole
3CaCO3 + 2FePO4 => Ca3(PO4)2 + Fe2(CO3)3
2 moles of FePO4 will react with 3 moles of CaCO3
Therefore,
0.17 mole of FePO4 will react with 0.17 x (3/2) = 0.255 mole of CaCO3
and
0.12 mole of CaCO3 will react with 0.12 (2/3) = 0.08 mole of FePO4
Therefore the excess reactant will be FePO4
B. 3 moles of CaCO3 will produce 1 mole of Ca3(PO4)2
so 0.12 mole of CaCO3 will produce 0.12 x (1/3) = 0.04 mole
Ca3(PO4)2 has molar mass of 310.18 g/mol
=> mass of Ca3(PO4)2 produced is 0.04 x 310.18 = 12.41g
Provide the balanced chemical equation for the complete combustion of propan-2-ol
The balanced chemical equation for the complete combustion of propan-2-ol (also known as isopropanol) is: C₃H₈O + 5O₂ → 3CO₂ + 4H₂O.
What is complete combustion?Complete combustion is a chemical reaction between a fuel and an oxidant that produces only carbon dioxide and water vapor as the products. In other words, in complete combustion, all of the fuel is burned completely, producing the maximum amount of heat and light energy. The general equation for complete combustion of a hydrocarbon fuel is: hydrocarbon + oxygen → carbon dioxide + water. In this reaction, methane reacts with oxygen to produce carbon dioxide and water vapor. This reaction is exothermic, meaning it releases heat energy, and it is used in many applications such as heating and energy production. Complete combustion is different from incomplete combustion, where the fuel is not burned completely and other products such as carbon monoxide (CO) and unburned hydrocarbons are produced. Incomplete combustion is generally less efficient and can produce harmful pollutants.
Here,
This equation shows that one molecule of propan-2-ol reacts with five molecules of oxygen gas to produce three molecules of carbon dioxide and four molecules of water vapor. This reaction releases energy in the form of heat and light and is a common way of producing energy from organic fuels. The balanced equation shows that the number of atoms of each element is the same on both sides of the equation, which is a requirement for a balanced chemical equation.
To know more about complete combustion,
https://brainly.com/question/14177748
#SPJ9
How many grams of carbon are present if it requires 57.5 kJ of energy to heat a sample
from 20.0 to 25.0°C?
Answer:
Explanation:
The amount of heat (q) required to raise the temperature of a substance is given by:
q = mcΔT
where m is the mass of the substance, c is the specific heat capacity of the substance, and ΔT is the change in temperature.
To find the mass of carbon present, we need to rearrange the formula as follows:
m = q / (cΔT)
We are given the following information:
q = 57.5 kJ (the amount of heat required)
ΔT = 25.0°C - 20.0°C = 5.0°C (the change in temperature)
The specific heat capacity of carbon is approximately 0.71 J/g°C.
We need to convert the amount of heat from kJ to J:
q = 57.5 kJ * 1000 J/kJ = 57500 J
Now we can substitute the values into the formula and solve for m:
m = q / (cΔT) = 57500 J / (0.71 J/g°C * 5.0°C) ≈ 1620 g
Therefore, approximately 1620 grams of carbon are present.
Convert a flow rate of 3.15 x 10^-5 kL.hr-1 to µL.s-1.
According to the given statement, A flow rate of 3.15 x 10^-5 kL.hr⁻¹ is equivalent to 8.75 µL.s⁻¹. To convert kL.hr⁻¹ to µL.s⁻¹, we can use the steps: (Given below)
What is flow rate and how is it measured?liquids flow is the amount of liquids that moves in a given amount of time. When measuring the flow of water supplies, different units are frequently used, including cubic feet per second (cfs), cubic meters per second (cms), gallons per minute (gpm), and others.
⇒ Convert kiloliters (kL) to liters (L) by multiplying by 1000.
⇒ Convert hours (hr) to seconds (s) by multiplying by 3600.
⇒ Convert liters per hour (L.hr⁻¹) to microliters per second (µL.s⁻¹) by dividing by 3.6.
Using these steps, we get:
3.15 x 10^-5 kL.hr⁻¹ = 3.15 x 10^-5 x 1000 L.hr⁻¹ = 0.0315 L.hr⁻¹
0.0315 L.hr⁻¹ = 0.0315 / 3600 L.s⁻¹ = 8.75 x 10^-6 L.s⁻¹
8.75 x 10^-6 L.s⁻¹ = 8.75 x 10^-6 x 10^6 µL.s⁻¹ = 8.75 µL.s⁻¹
Therefore, a flow rate of 3.15 x 10^-5 kL.hr⁻¹ is equivalent to 8.75 µL.s⁻¹.
To know more about flow rate visit :
https://brainly.com/question/1154328
#SPJ1
if i have 0.56g of pure Fe, how many moles is this?
Answer:
.01
Explanation:
moles = mass / molar mass
mass of Fe = 0.56 g
molar mass of Fe = 55.85 g/mol
moles = 0.56 g / 55.85 g/mol
moles = 0.01 mol (rounded to two decimal places)
Therefore, 0.56 g of pure Fe is equal to 0.01 moles.
Moles of Pure Iron: 0.01
Synopsis: This question is asking how many moles of pure iron (Fe) are present in a sample that weighs 0.56 grams.
Numbered list format:
The question is asking about the number of moles of Fe in a sample.
The sample weighs 0.56 grams.
We need to calculate the number of moles using the formula: moles = mass/molar mass.
The molar mass of Fe is 55.85 g/mol.
Plug in the values to the formula: moles = 0.56 g / 55.85 g/mol.
Simplify the expression: moles = 0.01 mol.
Simple analogy: If you have a bag of 10 marbles and each marble weighs 1 gram, and you want to know how many marbles are in a bag that weighs 0.56 grams, you would divide the weight of the bag (0.56 grams) by the weight of one marble (1 gram) to find the number of marbles in the bag (0.56 marbles).
Summary: The question asks for the number of moles of pure Fe in a sample of 0.56g, which can be calculated by dividing the mass by the molar mass of Fe, giving a result of 0.01 mol.
The answer is 0.01 moles.
steps
moles = mass / molar mass
mass of Fe = 0.56 g
molar mass of Fe = 55.85 g/mol
moles = 0.56 g / 55.85 g/mol
moles = 0.01 mol (rounded to two decimal places)
Therefore, 0.56 g of pure Fe is equal to 0.01 moles.
Moles of Pure Iron: 0.01
Synopsis: This question is asking how many moles of pure iron (Fe) are present in a sample that weighs 0.56 grams.
Numbered list format:
The question is asking about the number of moles of Fe in a sample.
The sample weighs 0.56 grams.
We need to calculate the number of moles using the formula: moles = mass/molar mass.
The molar mass of Fe is 55.85 g/mol.
Plug in the values to the formula: moles = 0.56 g / 55.85 g/mol.
Simplify the expression: moles = 0.01 mol.
Simple analogy: If you have a bag of 10 marbles and each marble weighs 1 gram, and you want to know how many marbles are in a bag that weighs 0.56 grams, you would divide the weight of the bag (0.56 grams) by the weight of one marble (1 gram) to find the number of marbles in the bag (0.56 marbles).
Summary: The question asks for the number of moles of pure Fe in a sample of 0.56g, which can be calculated by dividing the mass by the molar mass of Fe, giving a result of 0.01 mol.
what is the answer
The answer is 0.01 moles.
show the math
Sure, here's the math:
moles = mass / molar mass
mass of Fe = 0.56 g
molar mass of Fe = 55.85 g/mol
moles = 0.56 g / 55.85 g/mol
moles = 0.01 mol (rounded to two decimal places)
Therefore, 0.56 g of pure Fe is equal to 0.01 moles.
ChatGPT
How many grams of nitrogen, N2, would be required to react with 6.25 moles hydrogen, H2?
Answer:
56.88g N2
Explanation:
1 mole of N2 will react to 3 moles of H2
so 6.25 moles of H2 will react to 6.25/3 = 2.03 moles of N2
molar mass of N2 = 2(14.01) = 28.02 g/mol
mass of N2 = 2.03 x 28.02 = 56.88 g
2NaClO3 → 2NaCl + 3O2
How many moles of oxygen gas are produced when 7.3 moles of sodium chlorate, NaClO3, decomposes?
Answer:
2NaClO3 → 2NaCl + 3O2
It can be seen that 2 moles of NaClO3 produce 3 moles of O2.
Therefore, to find out how many moles of O2 are produced when 7.3 moles of NaClO3 decompose, we can set up a proportion:
2 mol NaClO3 / 3 mol O2 = 7.3 mol NaClO3 / x mol O2
Cross-multiplying, we get:
2 mol NaClO3 * x mol O2 = 3 mol O2 * 7.3 mol NaClO3
Simplifying:
x mol O2 = (3 mol O2 * 7.3 mol NaClO3) / 2 mol NaClO3
x mol O2 = 10.95 mol O2
Therefore, 10.95 moles of oxygen gas are produced when 7.3 moles of sodium chlorate decomposes.
Explanation:
C3H8 + 3O2 → 3CO2 + 4H2
How many moles of oxygen are necessary to react completely with 6.3 moles of propane (C3H8)?
Answer:
From the balanced chemical equation, we see that 1 mole of propane reacts with 3 moles of oxygen. Therefore, to react completely with 6.3 moles of propane, we need:
3/1 x 6.3 = 18.9 moles of oxygen.
So, 18.9 moles of oxygen are necessary to react completely with 6.3 moles of propane.
Explanation:
Suppose you heat a metal object with a mass of 33.6 g to 95.8 °C and transfer it to a calorimeter containing 100.0 g of water at 17.4 °C. The water and metal reach a final temperature of 23.8 °C.
The metal has a specific heat of about 0.39 J/(g°C).
How is specific heat capacity determined when energy is transferred?The equation q = mcT, where m is the sample mass, c is the specific heat, and T is the temperature change and is the linear expansion coefficient, which changes somewhat with temperature, can be used to determine how much heat a sample gains or loses.
q = m * c * ΔT
Where q is the amount of heat that is transmitted, m is the metal's mass, c is its specific heat, and T is the temperature change. Knowing that the heat transferred to metal and water is equal and in the opposing directions, we can:
q metal = -q water
We are also aware of the masses and variations in temperature of the metal and water:
m water = 100.0 g
ΔT water = 23.8 °C - 17.4 °C = 6.4 °C
m metal = 33.6 g
ΔT metal = 23.8 °C - 95.8 °C = -72.0 °C (negative because the metal is losing heat)
Using these values as substitutes and solving for c metal, we arrive at:
q metal = -q water
c metal = -100.0 g * 4.18 J/(g·°C) * 6.4 °C / (33.6 g * (-72.0 °C))
c metal ≈ 0.39 J/(g·°C)
To know more about specific heat visit:-
https://brainly.com/question/11297584
#SPJ1
Question:
Suppose you heat a metal object with a mass of 33.6 g to 95.8 °C and transfer it to a calorimeter containing 100.0 g of water at
17.4 °C. The water and metal reach a final temperature of 23.8 °C.
What is the specific heat of the metal?