Answer:
Play tennis, nothing can train you better for the sport than the sport itself. However, tennis is one of those unique sports that combine nearly all components of fitness including power, agility, speed, flexibility, reaction time, balance, coordination, cardiovascular endurance and muscular endurance.
Explanation:
The units of voltage are
Oohms, amps, volts
Oamps, volts, ohms
Ovolts, ohms, amps
Ovolts, amps, ohms
of current are
and of resistance are
Answer:24 volts ÷ 4 amps = 6 ohms
Explanation:
We know that the Ohm's law has given the relationship between the current, voltage and the resistance of the wire. Mathematically, it can be written as :
Where
I is the current
R is the resistance
If current flowing is 4 amps and voltage is 24 volts. The formula to find the resistance will be :
R = 6 Ohms
Hence, the correct option is (d) " 24 volts ÷ 4 amps = 6 ohms ".
Dish Network sent a satellite into orbit around 36000 km above the Earth's surface. What is the speed of the Satellite in miles per hour?
G=6.67 x 10^-11
M Earth = 5.98 x 10^24 kg
R Earth = 6.37 x 10^6 m
A. 306889 mi/hr
B. 6,864.38 mi/hr
C. 6.86491 mi/hr
D. 9.8mi/hr
Answer:
Explanation:
First, we need to use the formula for the speed of an object in circular orbit:
v = sqrt(GM/R)
where G is the gravitational constant, M is the mass of the Earth, R is the distance between the center of the Earth and the satellite.
Converting the units to meters and kilograms:
G = 6.67 × 10^-11 m^3/kg s^2
M = 5.98 × 10^24 kg
R = (36000 + 6.37 × 10^6) × 1000 = 4.23 × 10^7 m
Plugging in the values:
v = sqrt((6.67 × 10^-11) × (5.98 × 10^24) / (4.23 × 10^7))
v ≈ 3075.58 m/s
Finally, we can convert this to miles per hour:
v = 3075.58 m/s x (3600 s/hr) / (1609.34 m/mi) = 6873.18 mi/hr
Therefore, the answer is option A. 306889 mi/hr is incorrect.
You leave Fort worth ,Texas,at 2:41 p.m. and arrive in Dallas at 3:23 p.m. , covering a distance of 58km. what is your average speed in metres per second ?
Answer:
Explanation:
The time taken to travel from Fort Worth to Dallas is:
t = 3:23 pm - 2:41 pm = 42 minutes = 0.7 hours
The distance covered is:
d = 58 km
The average speed is:
v = d/t = 58 km / 0.7 hours = 82.86 km/h
To convert km/h to m/s, we can use the conversion factor:
1 km/h = 0.2778 m/s
Therefore, the average speed in m/s is:
v = 82.86 km/h × 0.2778 m/s/km = 23.06 m/s (rounded to two decimal places)
So the average speed is 23.06 m/s.
Which correctly describes a different evolutionary stage of a star like the sun
A) it’s forms from a cold, dusty molecular cloud
B) During a yellow giant stage, it burns carbon in its core and helium in the shell surrounding the core.
C) After leaving the main sequence, its core is stable due to electron degeneracy
D) It becomes a white dwarf after exploding as a supernova
E)During a red giant stage, its core contracts and cools
The statement that correctly defines an evolutionary stage of a star like the sun is that after leaving the main sequence, its core is stable due to electron degeneracy. That is option C.
What are the stage of life cycle of a star?The stages of the life cycle of a star include the following:
Giant Gas CloudProtostarT-Tauri PhaseMain SequenceRed GiantThe Fusion of Heavier ElementsSupernovae and Planetary NebulaeThe evolutionary stage is also called the main sequence stage of the life cycle of the star.
In this stage, the core temperature reaches the point for the fusion to occur whereby the protons of hydrogen are converted into atoms of helium. This leads to the stability of the core of the newly formed start due to electron degeneracy.
Learn more about star formation here:
https://brainly.com/question/29976256
#SPJ1
A 300 g football is kicked with an initial velocity of 140 m/s in a direction that
makes a 30° angle with the horizon. Find the peak height of the football.
Answer:
Explanation:
Assuming that air resistance is negligible, we can use the following kinematic equations to solve for the peak height:
v_f^2 = v_i^2 + 2ad
where v_f = 0 m/s (at the peak height) and a = -9.8 m/s^2 (acceleration due to gravity)
and
d = v_i t + (1/2)at^2
where d is the displacement or the peak height we want to find, v_i is the initial velocity, t is the time it takes to reach the peak height.
First, we need to resolve the initial velocity into its vertical and horizontal components:
v_i_x = v_i cos(30°) = 121.1 m/s
v_i_y = v_i sin(30°) = 70.0 m/s
Next, we can use the vertical component of the initial velocity to find the time it takes to reach the peak height:
v_f = v_i_y + at
0 m/s = 70.0 m/s + (-9.8 m/s^2)t
t = 7.14 s
Finally, we can use the time we found and the kinematic equation for displacement to find the peak height:
d = v_i_y t + (1/2)at^2
d = (70.0 m/s)(7.14 s) + (1/2)(-9.8 m/s^2)(7.14 s)^2
d = 247.5 m
Therefore, the peak height of the football is 247.5 meters.
A block of mass m1=3.0kg rests on a frictionless horizontal surface. A second block of m2=2.0kg hangs from an ideal cord of negligible mass that runs over an ideal pulley and then is connected to the first block . the blocks are released from rest . determine the displacement of the velocityA block of mass m1=3.0kg rests on a frictionless horizontal surface. A second block of m2=2.0kg hangs from an ideal cord of negligible mass that runs over an ideal pulley and then is connected to the first block . the blocks are released from rest . Determine how far has block 1 moved during the 1.2-s interval?
A) 13.4 m
B) 2.1 m
C) 28.2m
D) 7.6m
The answer is:
D. 7.6m
Explain how a balloon is able to keep its shape?
Answer:
It depends on how they are made.
Explanation:
Rubber balloons are not always spherical in shape. When filled with air, the inflation forms a balance between the balloon material, including its shape and thickness and its elasticity and the pressure of the air. That’s what determines its shape. Although a sphere is often the shape, it could be tubular, offset, and most other shapes.
Work Energy Theorem Question: You apply 50 N to a 10 kg object to cause it to move from rest to 2.5 m/s. What distance was the object moved?
Answer:
0.625 meters
Explanation:
We can use the work-energy that the work done on an object is equal to the change in its kinetic energy:
Work = ΔK = Kf - Ki
Where:
Work is the work done on the object
ΔK is the change in kinetic energy of the object
Kf is the final kinetic energy of the object
Ki is the initial kinetic energy of the object (which is zero since the object is at rest)
The work done on the object is equal to the force applied to the object multiplied by the distance over which the force is applied:
Work = F × d
Where:
F is the force applied to the object (50 N)
d is the distance over which the force is applied (unknown)
So we can write:
F × d = Kf - Ki
Substituting the given values:
50 N × d = 1/2 × 10 kg × (2.5 m/s)^2 - 0
Simplifying:
50 N × d = 31.25 J
Solving for d:
d = 31.25 J / 50 N = 0.625 m
Therefore, the object was moved a distance of 0.625 meters.
please rate
why the ocean near Christchurch is a different temperature than we’d expect for its latitude
Why the ocean near Christchurch is a different temperature than we'd expect for its latitude (distance from the equator)? Water moving from the equator is warmer than would be expected based on latitude, and so is warmer than the air it passes.
Changes to prevailing winds affect ocean currents. Changes to ocean currents affect how much energy is brought to (or taken away from) a location. In El Niño years, the prevailing winds that normally drive a warm current from the Equator past New Zealand are disrupted and may stop or even reverse.
A metal filament Lamp rated at 750w, 100v into be connected in series with a capacitor across a 230v, 60hz supply. Calculate the capacitance required
Answer : 0.00885 farads or 8.85 microfarads
Explanation: To calculate the capacitance required, we can use the following formula:
C = 1 / [2 * pi * f * ((V^2 - Vlamp^2)/P)]
where:
C = capacitance in farads (F)
pi = 3.14159...
f = frequency in hertz (Hz)
V = voltage in volts (V)
P = power in watts (W)
Vlamp = voltage of the lamp in volts (V)
Using the given values, we have:
C = 1 / [2 * pi * 60 * ((230^2 - 100^2)/750)]
C = 1 / [2 * 3.14159 * 60 * ((230^2 - 100^2)/750)]
C = 1 / [113.09724]
C = 0.00885 farads (F)
Therefore, the capacitance required is approximately 0.00885 farads or 8.85 microfarads.
Gas pressure is defined as
Select one:
O a. mass per unit area
O b.
O c. force per unit area
O d. force per unit volume
acceleration per unit volume
Answer: b. force per unit area.
Explanation:
What is the momentum of a 2.3 kg ball rolling at 6 m/s?
Show your work
Answer:
13.8 (kgm)/s
Explanation:
p(momentum) = m (mass) * v (velocity)
p= 2.3 * 6
p = 13.8
HELPPPP LATE HOMEWORK DUE TODAY
If F₁ has a greater magnitude than F₂, the box will accelerate backward because the net force is in the backward direction (1st option)
How do i know which direction the box will move to?To obtain the direction in which the box will move, we shall determine the net force acting on the box. This is illustrated below:
Assumption:
Magnitude of force 1 (F₁) = 40 NMagnitude of force 2 (F₂) = 25 NNet force (F) =?Net force = Magnitude of force 1 (F₁) - Magnitude of force 2 (F₂)
Net force = F₁ - F₂
Net force = 40 - 25
Net force = 15 N backward
From the above illustration, we can see that the net force is 15 N backward.
Thus, we can conclude from the box will accelerate backward (1st option)
Learn more about net force:
https://brainly.com/question/12282988
#SPJ1
A stuntman of mass 55 kg is to be launched horizontally out of a spring- loaded cannon. The spring that will launch the stuntman has a spring coefficient of 266N / m and is compressed 5 m prior to launching the stuntman. If friction and air resistance can be ignored, what will be the approximate velocity of the stuntman once he has left the cannon?
The approximate velocity of the stuntman, once he has left the cannon, is 11 m/s.
StepsWe can use the conservation of energy, where the potential energy stored in the compressed spring is converted into the kinetic energy of the stuntman as he is launched out of the cannon.
The potential energy stored in the spring is given by:
PE = (1/2)kx²
where k is the spring constant and x is the distance the spring is compressed.
PE = (1/2)(266 N/m)(5 m)² = 3325 J
This potential energy is then converted into kinetic energy:
KE = (1/2)mv²
where m is the mass of the stuntman and v is his velocity.
3325 J = (1/2)(55 kg)v²
v² = (2*3325 J) / 55 kg
v² = 121 m²/s²
v = √(121 m²/s²) = 11 m/s
Therefore, the approximate velocity of the stuntman, once he has left the cannon, is 11 m/s.
learn more about velocity here
https://brainly.com/question/25749514
#SPJ1
From these measurements, compute the possible error in the volume.
Plugging in the values of the length and diameter, along with the error value, the error in the volume of the cylinder is approximately 1.27 cm³.
What is error in measurement?Error in measurement refers to the deviation or difference between the true or expected value and the measured value of a physical quantity. The presence of errors in measurement can affect the accuracy and precision of the results obtained.
To compute the possible error in the volume of the cylinder, we first need to calculate the volume of the cylinder using the measured values of its length and diameter:
V = πr²h
r = d/2 = 2.1/2 = 1.05 cm
V = π(1.05)²(8.9) = 31.79 cm³
Now, we need to determine the possible error in the volume, which can be calculated using the formula:
ΔV = V × √[(Δd/d)² + (Δh/h)²]
where Δd and Δh are the uncertainties in the diameter and length measurements, respectively. Substituting the given values, we get:
ΔV = 31.79 × √[(0.1/2.1)² + (0.1/8.9)²] = 1.27 cm³ (approx.)
Therefore, the possible error in the volume of the cylinder is approximately 1.27 cm³.
To find out more about errors, visit:
https://brainly.com/question/28109798
#SPJ1
As shown in the figure, a light inextensible string is passing around a smooth light pulley and it is attached to a spring having spring constant K. When a mass is suspended to the pulley, the pulley moved downwards through a distance of x and attained equilibrium. The mass attached to the pulley is given by :
1) Kx/g
2) 2Kx/g
3) 3Kx/g
4) 4Kx/g
5) 5Kx/g
Please show me how you worked it out, along with a brief explanation.
The mass attached to the pulley is Kx/g.
option 1.
What is the mass attached to the pulley?Assuming there is no friction, the tension in the string will be constant throughout, and the net force on the pulley-mass system will be the weight of the mass.
Let the mass of the hanging weight be m, then the weight of the mass is mg.
The spring will be extended by the same distance x, as the string is inextensible, and it will exert a force of Kx in the upward direction.
Since the pulley is in equilibrium, the net force on the pulley-mass system must be zero.
Therefore, the tension in the string must be equal to the force exerted by the spring:
T = Kx
Using the fact that the tension in the string is equal to the weight of the mass, we can write:
mg = Kx
Therefore, the mass attached to the pulley is:
m = Kx/g
Learn more about mass attached to pulley here: https://brainly.com/question/29444263
#SPJ1
A similar device includes a transformer so that an MP3 player can also be charged. The primary coil has 300 turns.
(a) How many turns are needed in the secondary winding if the voltage is stepped up from 6.2 V to 15.5 V?
(b) Given that the current in the primary winding is 10 mA, what power is transmitted to the secondary windings if the transformer is 77% efficient?
The secondary coil needs 120 turns.The power transmitted to the secondary winding is 0.155 W.
How does the voltage change between the primary and secondary coil in a transformer?A transformer works by using electromagnetic induction to transfer electrical energy between two circuits. The voltage changes between the primary and secondary coil based on the ratio of the number of turns in each coil. In a step-up transformer, the voltage is increased from the primary to the secondary coil, while in a step-down transformer, the voltage is decreased.
Transformers are commonly used in electronic devices to convert voltage levels, isolate circuits, and match impedances. They are often used in power supplies to step down the voltage from the wall outlet to a level that can be used by the device. They are also used in audio amplifiers to match the impedance of the output to the speaker, and in radio and television receivers to tune in to different frequencies.
To know more about voltage,visit:
https://brainly.com/question/29445057
#SPJ1
A rocket takes off from a space station, where there is no gravity other than the negligible gravity due to the space station, and reaches a speed of 110 m/s in 10.0 s. If the exhaust speed is 1,600 m/s and the mass of fuel burned is 118 kg, what was the initial mass (in kg) of the rocket?
The initial mass of the rocket was 106 kg.
What is the initial mass of the rocket?We can use the principle of conservation of momentum to solve this problem.
The momentum of the rocket before takeoff is zero, since it is at rest, and the momentum after takeoff is the product of the mass of the rocket and its velocity.
However, during the takeoff, the rocket ejects a mass of fuel at a certain velocity, which creates a backward force (thrust) that propels the rocket forward.
This thrust can be calculated using the equation:
Thrust = (mass flow rate) x (exhaust velocity)
mass flow rate = (mass of fuel burned) / (burn time)
The mass of the rocket at any given time can be calculated using the equation:
mass = (initial mass) - (mass of fuel burned)
Using these equations, we can solve for the initial mass of the rocket:
Calculate the thrust:
Thrust = (118 kg / 10.0 s) x 1600 m/s = 1,888 N
Calculate the mass of the rocket at the end of the burn:
mass(end) = (initial mass) - (mass of fuel burned) = (initial mass) - 118 kg
Use the principle of conservation of momentum to find the initial mass:
momentum before = momentum after
0 = (mass(end) + 118 kg) x 110 m/s
mass(end) = -118 kg / 110 m/s = -1.07 kg/s
mass(end) = (initial mass) - 118 kg
(initial mass) = mass(end) + 118 kg
(initial mass) = (-1.07 kg/s x 10.0 s) + 118 kg
(initial mass) = 106 kg
Learn more about linear momentum here: https://brainly.com/question/7538238
#SPJ1
How could you use the game of baseball to explain the difference between
inertia and momentum?
Explanation:
Inertia refers to the tendency of an object to resist changes in its motion. In baseball terms, a baseball that is at rest on the ground has a high level of inertia because it is resistant to moving until an external force, such as a player's bat, acts on it.
Momentum, on the other hand, is the product of an object's mass and velocity and refers to the quantity of motion that an object possesses. In baseball terms, a baseball that is moving at a high velocity, such as when it is hit by a bat, has a high level of momentum.
To illustrate the difference between inertia and momentum in baseball, consider the scenario of a baseball that is hit by a bat. Before the bat hits the ball, the ball is at rest and has a high level of inertia. However, once the bat hits the ball, the ball gains momentum and begins to move. As the ball moves, it continues to possess momentum, but its inertia gradually decreases as it encounters external forces, such as air resistance and friction from the ground, which act to slow it down.
Mary walked north from her home to Sheila's home, which is 4.0 kilometers away. Then she turned right and walked another 3.0 kilometers to the supermarket, which is 5.0 kilometers from her own home. She walked the total distance in 1.5 hours. What were her average speed and average velocity?
A.
Her average speed was about 4.6 km/hr, and her average velocity was about 3.3 km/hr.
B.
Her average speed was about 3.3 km/hr, and her average velocity was about 4.6 km/hr.
C.
Her average speed was about 3.3 km/hr, and her average velocity was 0 km/hr.
D.
Her average speed was 0 km/hr, and her average velocity was about 4.6 km/hr.
Her average speed was about 4.6 km/hr, and her average velocity was about 3.3 km/hr.
The entire distance travelled divided by the total time taken is the definition of average speed. In this case, the total distance travelled was 7.0 km, and the total time taken was 1.5 hours. Hence, the average speed can be determined as follows:
Average Speed = [tex]\frac{7.0 km }{ 1.5 \ hours }= 4.6 km/hr[/tex]
The displacement divided by the whole time travelled is the average velocity. In this case, the displacement was 3.0 km (from Mary's home to Sheila's home), and the total time taken was 1.5 hours.The average velocity can therefore be determined as follows:
Average Velocity = [tex]\frac{3.0 km }{1.5 \ hours} = 3.3 km/hr[/tex]
Therefore,Her average velocity was roughly 3.3 km/hr, and her average speed was roughly 4.6 km/hr.
learn more about Average speed Refer:brainly.com/question/12322912
#SPJ1
QUESTION 7
Which of the following statements best summarizes the energy conversion taking place in the every day item shown below? (a flashlight)
a. Chemical energy from the battery is converted to electrical energy in the flashlight.
b. Nuclear energy from the battery is converted to thermal energy that heats up the light.
c. Thermal energy from the battery is converted to electrical energy in the flashlight.
d. Electrical energy from the battery is converted to potential energy.
Answer:
a. Chemical energy from the battery is converted to electrical energy in the flashlight.
1. A 8.2 kg mass hanging from a spring scale is slowly lowered onto a vertical spring.
A) What does the spring scale read just before the mass touches the lower spring?
B) The scale reads 14 N when the lower spring has been compressed by 2.4 cm . What is the value of the spring constant for the lower spring?
C) At what compression length will the scale read zero?
The spring scale read just before the mass touches the lower spring is 80.36N, the spring constant for the lower spring is 2765N/m and at 2.9cm length the scale will read zero.
Given the mass of spring = 8.2kg
The force exerted for compressing of spring = 14N
The compression in spring = 2.4cm = 0.024m
(A.) Initially the spring scale reads only the weight of the mass = mg
W = 8.2 * 9.8 = 80.36N
(B) Let the value of spring constant = k
The net force exerted so that the scale reads(F') = 80.36N - 14 = 66.36N
We know that according to Hooke's law the force exerted on spring F = kx such that:
F' = kx then:
66.36 = k * 0.024
k = 66.36/0.024 = 2765N/m
(C) the compression where scale reads zero = x'
The scale reads zero when the restoring force equals to the weight of the mass then the scale reads zero such that:
x' = 80.36/2765 = 0.029m = 2.9cm
To learn more about spring constant click here https://brainly.com/question/14159361
#SPJ1
460miles per hour with the wind nd 420 per hour gainst the wind
The speed of the wind is 20 miles per hour.
To solve this problem, we can use the formula:
Speed = Distance/Time
Let's assume that the speed of the wind is x miles per hour.
With the wind, the plane travels at a speed of 460 miles per hour. This means that its speed relative to the ground is the sum of its airspeed and the speed of the wind:
460 = Airspeed + x
Against the wind, the plane travels at a speed of 420 miles per hour. This means that its speed relative to the ground is the difference between its airspeed and the speed of the wind:
420 = Airspeed - x
We can solve this system of equations to find the airspeed of the plane:
460 = Airspeed + x
420 = Airspeed - x
Adding the two equations gives:
880 = 2Airspeed
Dividing both sides by 2 gives:
Airspeed = 440 miles per hour
Now that we know the airspeed of the plane, we can find the speed of the wind by substituting this value into one of the equations we obtained earlier:
460 = Airspeed + x
460 = 440 + x
x = 20
To learn more about speed visit;
https://brainly.com/question/28224010
#SPJ9
help me
Write your answer on the lines below.
4. Are the light waves reflecting off a red stop sign longer or shorter than the waves reflecting off a violet-colored jacket? Explain how you know.
The light waves reflecting off a red stop sign would be longer than the light waves reflecting off a violet-colored jacket. This is because red light has a longer wavelength than violet light.
Light waves and reflectionLight waves, like all waves, are characterized by their wavelength. The wavelength of a wave determines its color, with shorter wavelengths appearing as blue and violet, and longer wavelengths appearing as red and orange.
Because the wavelength of red light is longer than the wavelength of violet light, the light waves reflecting off the red stop sign would be longer than the light waves reflecting off the violet-colored jacket.
Learn more about Light waves here:
https://brainly.com/question/15033563
#SPJ1
A soccer player kicks a ball of mass 0.500 kg toward the goal.The ball hits the crossbar at a height of 2.6 m with a speed of 15.0m/s. Suppose the ball was at rest on the ground before it was kicked. Use g = 9.80 m/s.
Answer:
The speed of the ball just before it hits the crossbar is 7.22 m/s.
Explanation:
We can use the conservation of energy to solve this problem.
At the moment the player kicks the ball, the ball has only kinetic energy, since it was at rest on the ground before being kicked. When the ball hits the crossbar, it has both kinetic energy and potential energy, since it is at a height above the ground. We can set the initial kinetic energy equal to the sum of the final kinetic and potential energy:
(1/2)mv^2 = mgh
where:
m = mass of the ball (0.500 kg)
v = initial speed of the ball (15.0 m/s)
g = acceleration due to gravity (9.80 m/s^2)
h = height of the crossbar above the ground (2.6 m)
We want to solve for the speed of the ball just before it hits the crossbar, which we can do by rearranging the equation:
v = sqrt(2gh)
v = sqrt(29.802.6) = 7.22 m/s (rounded to two decimal places
Projectile Motion Practice Problems (horizontal and at an angle)
1. Josh kicks a soccer ball with a velocity of 15 m/s at an angle of 38° above the
horizontal.
a. What are the X and Y components of his velocity?
b. How long is the ball in the air?
c. How far will the ball go?
Answer:
Explanation:
a. The X and Y components of the velocity can be found using trigonometry:
X = V * cos(θ) = 15 m/s * cos(38°) ≈ 11.63 m/s
Y = V * sin(θ) = 15 m/s * sin(38°) ≈ 9.14 m/s
b. The time the ball is in the air can be found using the Y component of the velocity and the acceleration due to gravity:
Y = V * sin(θ) * t - (1/2) * g * t^2
where g = 9.8 m/s^2 is the acceleration due to gravity
Solving for t, we get:
t = 2 * Y / g ≈ 1.87 s
c. The distance the ball travels can be found using the X component of the velocity and the time in the air:
distance = X * time = 11.63 m/s * 1.87 s ≈ 21.78 m
At 5220J, a temperature increase occurs from 10 degrees Celsius to 60 degrees Celsius. What is the mass of the water?
The mass of water that undergoes a change in temperature from 10 degrees celsius to 60 degrees celsius is 24.9 g.
What is mass?Mass is the quantity of matter a body contained.
To calculate the mass of the water, we use the formula below
Formula:
m = Q/cΔt................... Equation 1Where:
m = Mass of waterQ = Amount of heatc = Specific heat capacity of waterΔt = Change in temperatureFrom the question,
Given:
Q = 5220 Jc = 4200 J/kg.KΔt = 60-10 = 50 degree celsiusSubstitute these values into equation 1
Q = 5220/(4200×50)Q = 0.0249 kgQ = 24.9 gHence, the mass of water is 24.9 g.
Learn more about mass here: https://brainly.com/question/28409714
#SPJ1
A 1.20 kg copper rod resting on two horizontal rails 0.90 m apart carries a
current I = 55.0 A from one rail to the other. The coefficient of static friction
between the rod and rails is μs= 0.60.
(a) What is the smallest vertical magnetic field B that would cause the rod to
slide?
(b) Suppose a B field is directed at some angle to the vertical φ, with the current
along the rod directed into the page, as shown. Find an expression for B as a
function of φ for the case when the rod is just on the verge of beginning to slide.
(c) Find the value of φ which yields the smallest value of B that would cause
the rod to slide, together with the corresponding value of B.
(a) The smallest vertical magnetic field B that would cause the rod to
slide is 0.145 Tesla for given The coefficient of static friction
between the rod and rails is μs= 0.60
What is magnetic field ?A magnetic field is a vector field that describes the magnetic influence on moving charges, currents, and magnetic materials. A moving charge in a magnetic field is subjected to a force that is perpendicular to both its own velocity and the magnetic field.
(a) using formula
μs × m × g = I × L × B
μs= 0.60
M= 1.2 kg
I = current = 55.0 A
L = Length = 0.9 m
magnetic field (B) = 0.145 Tesla
(b) expression
force (f) = I × L × B × sinФ
(c) given B = 0.145 Tesla
μs × m × g= I × L × B × sinФ
Ф = 90°
to know more about magnetic field , visit ;
brainly.com/question/26898099
#SPJ1
waves are generated in a rope of length 6m. What is the speed of the wave if its period is 25.m
The speed of the wave would be0.48 m/s.
Speed of a waveThe speed of a wave is given by the formula:
v = λ/T
where v is the wave speed, λ (lambda) is the wavelength, and T is the period.
To solve this problem, we need to know the wavelength of the wave. We can find the wavelength using the formula:
λ = 2L
where L is the length of the rope. Substituting L = 6 m, we get:
λ = 2 × 6 m = 12 m
Now we can use the formula for wave speed:
v = λ/T
Substituting λ = 12 m and T = 25 s, we get:
v = 12 m/25 s = 0.48 m/s
Therefore, the speed of the wave is 0.48 m/s.
More on the speed of a wave can be found here: https://brainly.com/question/10715783
#SPJ1
A 208g sample of sodium-24 decays to 13.0g of sodium-24 within 60.0 hours. What is the half life of this radioactivity isotope?
Answer:
15 hours
Explanation:
formula: f(a) = a(0.5)^(T/t)
fill in known values: 13=208(0.5)^(60/t)
use natural log to isolate t: ln(13/208)=ln(0.5)(60/t)
solve for t: t=15