What does pressure measure

Answer:

258.71 dm³

Explanation:

We'll begin by calculating the number of mole of O₂ produced by the decomposition of 12 moles of KClO₃. This can be obtained as follow:

The balanced equation for the reaction is given below:

2KClO₃ —> 2KCl + 3O₂

From the balanced equation above,

2 moles of KClO₃ decomposed to produce 3 moles of O₂.

Therefore, 12 moles of KClO₃ will decompose to produce = (12 × 3)/2 = 18 moles of O₂.

Finally, we shall determine the volume of the O₂. This can be obtained as follow:

Temperature (T) = 325 K

Pressure (P) = 188 KPa

Number of mole (n) = 18 moles

Gas constant (R) = 8.314 KPa.dm³/Kmol

Volume (V) =?

PV = nRT

188 × V = 18 × 8.314 × 325

188 × V = 48636.9

Divide both side by 188

V = 48636.9 / 188

V = 258.71 dm³

Thus, 258.71 dm³ of oxygen were obtained from the reaction.

"0.0340" mol of CH₄ are in sealed flask.

Methane would also be a greenhouse gas, therefore its existence tends to affect humanity's surface temp as well as weather patterns framework; it is released into the atmosphere from such a wide assortment of life forms as well as biogenic.

According to the question,

Volume, V = 800 mL or, 0.800 L

Temperature, T = 22°C or, 295

Pressure, P = [tex]\frac{780}{760}[/tex] = 1.03 atm

As we know the relation,

The gram of moles will be will be:

→ n = [tex]\frac{PV}{RT}[/tex]

By substituting the values, we get

     = [tex]\frac{1.03\times 0.800}{0.08206\times 295}[/tex]

     = [tex]\frac{0.824}{242.077}[/tex]

     = 0.0340

Thus the response above is correct.

Find out more information about methane here:

https://brainly.com/question/24690118

Answer:

what is the volume of the water at 307 k?

the doge has the answer

Pb(NO3)4

Answer:

2.39 atm

Explanation:

We'll begin by calculating the number of mole in 0.41 g of neon (Ne). This can be obtained as follow:

Mass of Ne = 0.41 g

Molar mass of Ne = 20 g/mol

Mole of Ne =.?

Mole = mass / molar mass

Mole of Ne = 0.41 / 20

Mole of Ne = 0.0205 mole

Next we shall convert 200 mL to L.

1000 mL = 1 L

Therefore,

200 mL = 200 mL × 1 L / 1000 mL

200 mL = 0.2 L

Next, we shall convert 11 °C to Kelvin temperature.

T(K) = T(°C) + 273

T(°C) = 11 °C

T(K) = 11 + 273

T (K) = 284 K

Finally, we shall determine the pressure. This can be obtained as follow:

Mole of Ne (n) = 0.0205 mole

Volume (V) = 0.2 L

Temperature (T) = 284 K

Gas constant (R) = 0.0821 atm.L/Kmol

Pressure (P) =?

PV = nRT

P × 0.2 = 0.0205 × 0.0821 × 284

P × 0.2 = 0.4779862

Divide both side by 0.2

P = 0.4779862 / 0.2

P = 2.49 atm

Therefore, the pressure of the gas is 2.39 atm

Answer:

[tex]\frac{250}{3}[/tex]

Explanation:

you can expect to get a 3 (theoretically) 1 time every 6 times you roll. A 1/6 chance.

Here's the equation:

[tex]\frac{1}{6} =\frac{x}{500}[/tex]

cross multiply (i think that's what it is called)

500=6x

divide by 6 on both sides:

x=[tex]\frac{250}{3}[/tex] or approx 83 times.

Hope this helps! Lmk if u have more questions <3

50500Nm^2 or 5.05Nm^2

Explanation:

so bring out the parameters

p1= 0.12dm3, T1= 60c , because temperature is in kelvin add 273= 333k, v1= 0.12dm3 , T2= to the same value because the temperature didn't change = 333k, v2= 0.24dm3,P2= ?

general gas equation p1v1 over T1 = P2V2 over T2, when you input everything or make p2 the subject of the formula first you'll get the answer, pressure can have an s.i unit of mmhg but I'm using the same si unit as the question given and always check your units in the question to convert. please if this question has options please check, I don't want you to fail so verify from others if I made a mistake

Answer:

E: the point where the acid and base have been added in proper stoichiometric amounts

Explanation:

Equivalence point in titration is simply the point where the amounts of acid and base used just sufficiently reacts chemically to cause neutralization whereas the endpoint is the point where the indicator of the titration changes colour.

The Equivalence point occurs before the endpoint.

Thus, option E is correct.

Answer:

D Both are made of rock ,ice and solar dust from the beginning of the solar system

Answer:

The answer is D

Explanation:

Answer:

316.227766

Explanation:

The cork oak tree from which cork is extracted is native to southwest europe and northwest africa. Cork is extracted from cork oak trees without harming the tree. So cork is a type of mineral. The correct option is C.

The dead cells without having intercellular spaces are defined as the cork cells. They appear at the periphery of roots and stems when they grow older and increase in girth. They also have a chemical called suberin in their walls.

It is the suberin which makes them impervious to gases and water. The outer protective coat of a tree is called the cork. It is one of the components of bark of the tree. The tissues of bark become old and the secondary mersitem replaces them.

Cork is made up of multiple thick layers and it protects the tree from bacterial or fungal infection.

Thus the correct option is C.

To know more about Cork, visit;

https://brainly.com/question/29692488

#SPJ2

Answer:

[tex]V_2=8.4L[/tex]

Explanation:

Hello there!

In this case, according to the definition of the Boyle's law, which describes de pressure-volume behavior as an inversely proportional relationship, it is possible for us to write:

[tex]P_1V_1=P_2V_2[/tex]

Thus, since we are given the initial pressure and temperature, and the final pressure, we are able to calculate the final volume as shown below:

[tex]baV_2=\frac{P_1V_1}{P_2}\\\\V_2=\frac{8.0L*1.013bar}{ 0.968bar}\\\\V_2=8.4L[/tex]

Regards!

Answer:

Cu + HNO3 → Cu(NO3)2 + H2O + NO2

Cu + 4HNO3 → Cu(NO3)2 + 2H2O + 2NO2 (balanced equation)

Answer:

(J) All organisms are composed of cells

Answer:

Burning wood

Explanation:

the fire releases heat into the air from the burning wood

Answer:

686.43363984 is the answer when 7.8 moles is converted.

Answer:

20.9%

Explanation:

I took the test i hope this helps:)

The percentage by mass of solution formed by dissolving 27.0 grams of HCl in 102.0 grams of water is 20.93%. This is calculated using the definition (formula) of percentage by mass of a solution.

The mass percent of a solution is defined as the ratio of the mass of solute that is present in a solution, relative to the mass of the solution, as a whole.

The formula for percentage by mass is given as

percentage by mass = (mass of the solute/ total mass of the compound solution) × 100

The mass of the solute ( the chemical which is going to be dissolved) HCl

= 27.0 grams

The mass of the solvent (the substance in which a solute dissolve) water

= 102.0 grams

So, the total mass of the solution = 27.0 + 102.0 = 129.0 grams

Then, the percentage by mass = [tex]\frac{27.0}{129.0}[/tex] × 100 = 20.93%

Which is approximate equal to 20.946 at option B.

Therefore, the percentage by mass of solution formed by dissolving 27.0 grams of HCl in 102.0 grams of water is 20.93%.

Learn more about percentage by mass here:

https://brainly.com/question/17812901

#SPJ2

Answer:

I dont know

Explanation:

good luck

Answer:

1.14 mol

Explanation:

The concept ideal gas law can be used here to determine the volume of the balloon. The volume of the balloon is 76.97 L.

The combination of Boyle's law, Charles's law and Avogadro's law leads to an equation which gives the combined effect of change of temperature and pressure on the volume of a gas.

According to Boyle's law, V ∝ 1/P

According to Charles's law, V ∝ T

According to Avogadro's law, V ∝ n

On combining all these equations, the ideal gas equation is given as:

PV = nRT

P - Pressure

V - Volume

n - Number of moles

R - Universal Gas constant

T - Temperature

Here the standard pressure is 1 atm

20°C = 20 + 273 = 293 K

V = nRT / P

3.2 × 0.0821 × 293 / 1

= 76.97 L

Thus the volume of balloon is 76.97 L.

To know more about ideal gas law, visit;

https://brainly.com/question/30458409

#SPJ2

Answer:

It will go faster each time because she is stirring therefore the water can get to the salt faster than it just sitting at the top

Explanation:

Answer: C3H8 + 5O2 = 3Co2 +4H2O

Explanation: Equations must be balanced

You must have the same amount of C

H and O on both sides of the equation

Answer:

Refraction

Explanation:

Answer:

H2O2 reduces itself to H2O and also oxidizes to O2 simultaneously thereby acting both as an oxidizing and reducing agent .

Explanation:

When

H2O2 acts as an oxidizing agent

H2O2 + 2e- 2H+--->   2H2O

Reducing agent

H2O2 --> O2 + 2e + 2H+

H2O2 reduces itself to H2O and also oxidizes to O2 simultaneously thereby acting both as an oxidizing and reducing agent .

Answer:

Following are the solution to the given question:

Explanation:

Each method through KHP is somewhat more precise since we have weighed that requisite quantity, we exactly know the KHP intensity appropriately. Its initial 6 M HCl concentration was never considered mandatory. They have probably prepared 6 M HCl solution although long ago and could have changed its concentration over even a period.

The final temperature of the gas is 269.9 K, or -3.25 °C, which was calculated with the help of ideal gas equation.

The ideal gas equation gives the relation between pressure, volume and temperature.

PV = nRT

where P is the pressure, V is the volume, n is the number of moles, R is the gas constant, and T is the temperature in Kelvin.

To find the initial volume of the gas. We can use the fact that the number of moles of gas does not change during the cooling process:

n = 0.850 moles

We can also use the ideal gas law to find the initial volume of the gas:

PV = nRT

V = nRT/P

where R = 0.08206 L atm/K mol is the gas constant.

Convert the initial temperature from Celsius to Kelvin:

T1 = 85 °C + 273.15 = 358.15 K

Substitute the given values into the equation:

V₁ = (0.850 mol)(0.08206 L atm/K mol)(358.15 K)/(1 atm) = 24.03 L

Now we can use the combined gas law to find the final temperature:

(P₁V₁/T₁) = (P₂V₂/T₂)

Substitute the given values into the equation:

(1.25 atm)(24.03 L)/(358.15 K) = (P₂) (17.55 L)/(T2)

Solve for T₂:

T₂ = (P₂)(17.55 L)(358.15 K)/(1.25 atm)(24.03 L)

T₂ = 269.9 K

Therefore, the final temperature of the gas is 269.9 K, or -3.25 °C.

Learn more about ideal gas equation, here:

https://brainly.com/question/14826347

#SPJ3

The 3.13 g of K would be needed to completely react with the remaining [tex]Cl_2[/tex].

To determine which reactant is limiting, we need to calculate the amount of product that can be formed from each reactant and compare them. The reactant that produces less product is the limiting reactant, since the reaction cannot proceed further once it is consumed.

The balanced chemical equation for the reaction between solid potassium and chlorine gas is:

2 K(s) + [tex]Cl_2[/tex](g) -> 2 KCl(s)

From the equation, we can see that 2 moles of K react with 1 mole of [tex]Cl_2[/tex] to form 2 moles of KCl.

First, we need to convert the masses of K and [tex]Cl_2[/tex] into moles:

moles of K = 15.20 g / 39.10 g/mol = 0.388 mol

moles of [tex]Cl_2[/tex] = 2.830 g / 70.90 g/mol = 0.040 mol

Now, we can use the mole ratio from the balanced equation to calculate the theoretical yield of KCl from each reactant:

Theoretical yield of KCl from K: 0.388 mol K x (2 mol KCl / 2 mol K) = 0.388 mol KCl

Theoretical yield of KCl from [tex]Cl_2[/tex]: 0.040 mol [tex]Cl_2[/tex] x (2 mol KCl / 1 mol [tex]Cl_2[/tex]) = 0.080 mol KCl

We can see that the theoretical yield of KCl from K is 0.388 mol, while the theoretical yield of KCl from [tex]Cl_2[/tex] is 0.080 mol. Therefore, the limiting reactant is [tex]Cl_2[/tex], since it produces less product.

To determine how much more of the limiting reactant would be needed to completely consume the excess reactant, we can use the stoichiometry of the balanced equation.

We know that 1 mole of [tex]Cl_2[/tex] reacts with 2 moles of K to produce 2 moles of KCl. Therefore, the amount of additional K needed to react with the remaining [tex]Cl_2[/tex] can be calculated as follows:

moles of K needed = 0.040 mol [tex]Cl_2[/tex] x (2 mol K / 1 mol [tex]Cl_2[/tex])

                                = 0.080 mol K

This means that 0.080 moles of K would be needed to completely consume the remaining [tex]Cl_2[/tex]. We can convert this to a mass by multiplying by the molar mass of K:

mass of K needed = 0.080 mol K x 39.10 g/mol

                              = 3.13 g K

Therefore, The 3.13 g of K would be needed to completely react with the remaining.

Example verification:

Suppose we had an additional 0.50 g of [tex]Cl_2[/tex] in the reaction. Would all of the K be consumed, or would there still be excess K?

Moles of additional [tex]Cl_2[/tex] = mass of [tex]Cl_2[/tex] / molar mass of [tex]Cl_2[/tex]

Moles of additional [tex]Cl_2[/tex] = 0.50 g / 70.90 g/mol

Moles of additional [tex]Cl_2[/tex] = 0.0070 mol

The theoretical yield of KCl that can be formed from the additional [tex]Cl_2[/tex] is:

0.0070 mol [tex]Cl_2[/tex] x (2 mol KCl / 1 mol [tex]Cl_2[/tex]) x (74.55 g KCl / 1 mol KCl) = 1.04 g KCl

Therefore, the total amount of KCl that can be formed from all of the [tex]Cl_2[/tex] is:

5.95 g + 1.04 g = 6.99 g

The amount of K that would be needed to completely consume all of the [tex]Cl_2[/tex].

Learn more about Solid Potassium at

brainly.com/question/27549056

#SPJ1

Answer:56%

Explanation:

In the dewpoint chart when you line it up it ends up at 56%

The relative humidity of the air when the dry temperature is about 4 degrees and the dew point is about -4 degrees C is 56%. Hence option  4 is correct.

The dew point is the temperature at which the air needs to be colled at a ta constant pressure in order to have an RH of 100%. The dew point is minus four degrees and the RH of the air is 4 degrees.

For the forces to initiate the air must get cooler and a constant addition of water pressure should be there. Thus substrating the temperature of the wet bulb, putting the thermometer on the dry bulb, and making use of the RH chart tells us that RH is 56%

Find out more information about the relative humidity.

brainly.com/question/5369085

Answer: a mathematical expression describing the probability of finding an electron at various locations; usually represented by the region of space around the nucleus where there is a high probability of finding an electron

Explanation: