Answer:
To explain the energy of two blocks, several types of evidence can be used depending on the context and the specific question being asked. Here are some examples:
Kinetic energy: The kinetic energy of a moving object is given by the formula KE = 0.5 * m * v^2, where m is the mass of the object and v is its velocity. If the two blocks are moving, their kinetic energy can be calculated using this formula.
Potential energy: The potential energy of an object is the energy it possesses by virtue of its position or configuration. If the two blocks are lifted to a certain height, they will possess potential energy due to their position in the Earth's gravitational field. The potential energy of an object is given by the formula PE = m * g * h, where m is the mass of the object, g is the acceleration due to gravity, and h is the height above a reference point.
Work done: If a force is applied to move the two blocks, work is done on them. The work done on an object is given by the formula W = F * d, where F is the force applied, and d is the distance over which the force is applied.
Conservation of energy: The law of conservation of energy states that energy cannot be created or destroyed, only converted from one form to another. Therefore, if the energy of the two blocks changes, it must be due to the transfer of energy from one form to another, such as from potential energy to kinetic energy or vice versa.
Overall, the evidence used to explain the energy of two blocks will depend on the specific context of the question being asked and the type of energy being considered.
what are the two limiting cruising altitudes usable on v343 for a vfr-on-top flight from dbs vortac to raney intersection?
The two limiting cruising altitudes usable on V343 for a VFR-on-top flight from DBS VORTAC to Raney Intersection are 6,000 feet and 14,000 feet.
VFR-on-top is a type of flight that must remain in visual meteorological conditions (VMC) and must not exceed the airspace altitude limitations. The airspace altitude limitations along V343 from DBS VORTAC to Raney Intersection are 6,000 feet and 14,000 feet.
To find out the limiting cruising altitudes:
1. Consult the airspace altitude limitations along the route of flight.
2. Note the airspace altitude limitations along V343 from DBS VORTAC to Raney Intersection.
Therefore, the two limiting cruising altitudes usable on V343 for a VFR-on-top flight from DBS VORTAC to Raney Intersection are 6,000 feet and 14,000 feet.
To know more about the cruising altitudes click here:
https://brainly.com/question/28570496
#SPJ11
grandma dynamite accelerates her bus from a stop to 90 m/s in just 12 seconds. what is her acceleration?
Grandma dynamite's bus has an acceleration of 7.5 m/s².
acceleration = (final velocity - initial velocity) / time
where the final velocity is 90 m/s, the initial velocity is 0 m/s (since the bus starts from a stop), and the time taken is 12 seconds.
acceleration = (90 m/s - 0 m/s) / 12 s
acceleration = 7.5 m/s²
Acceleration is a fundamental concept in physics that describes the rate of change of an object's velocity over time. It is defined as the change in velocity divided by the change in time, and is expressed in units of meters per second squared (m/s²).
Acceleration can occur in different ways, such as speeding up or slowing down, changing direction, or a combination of both. A positive acceleration means an object is speeding up, while a negative acceleration means it is slowing down. Acceleration also depends on the mass of the object, with a larger mass requiring a greater force to achieve the same acceleration as a smaller mass.
To learn more about Acceleration visit here:
brainly.com/question/30660316
#SPJ4
Question 8 of 10
Which three statements describe mechanical waves?
A. The waves can travel through empty space.
B. The waves need matter to transfer energy.
C. The waves transfer energy by causing particles of matter to
move.
D. The waves can transfer energy through solids, liquids, and gases.
Please help!
A. The waves can travel through empty space.
D. The waves can transfer energy through solids, liquids, and gases.
C. The waves transfer energy by causing particles of matter to move.
Mechanical waves are waves that require matter to transfer energy.These waves transfer energy by causing particles of matter to move in the direction of the wave. This type of wave can travel through solids, liquids, and gases, but not through empty space.
There are two types of mechanical waves, longitudinal and transverse. Longitudinal waves are waves that travel in the same direction as the vibration of particles, while transverse waves travel perpendicular to the vibration of particles. An example of a longitudinal wave is a sound wave, while an example of a transverse wave is a water wave.
Mechanical waves are important to us as they are responsible for transferring energy through various mediums. For example, sound waves are propagated through the air and enable us to hear sound. This type of wave also transfers energy through solids, such as the vibrating strings of a guitar, and liquids, such as the waves of an ocean.
In conclusion, mechanical waves are waves that require matter to transfer energy and can transfer energy through solids, liquids, and gases. These waves travel in the same direction as the vibration of particles (longitudinal) or perpendicular to the vibration of particles (transverse). Mechanical waves are important to us as they transfer energy
Learn more about Mechanical waves here:
https://brainly.com/question/26116832
#SPJ1
what is the inductance of a coil if the coil produces an emf of 2.50 v when the current in it changes from -29.0 ma to 33.0 ma in 14.0 ms ?
The inductance of a coil, if the coil produces an emf of 2.50 V when the current in it changes from -29.0 mA to 33.0 mA in 14.0 ms, is 0.146 H.
Inductance of a coil The amount of electromotive force generated across a conductor when there is a change in the current flowing through it is defined as self-inductance.
The unit of inductance is the Henry (H), with the symbol L. The voltage induced in the coil is determined by the current passing through it, as well as the coil's inductance. Faraday's law of electromagnetic induction establishes a link between the two entities.
What is Faraday's law of electromagnetic induction?The principle of electromagnetic induction is defined by Faraday's law, which states that the emf (electromotive force) produced by a change in magnetic flux linkage with time is proportional to the negative of the rate of change of magnetic flux linkage.
When there is a change in magnetic flux passing through a coil, this law predicts that an electromotive force is generated in it.
What is emf?The acronym emf stands for electromotive force, and it represents the quantity of energy that drives current flow in a circuit. The unit of emf is the volt (V).
What is inductance?The amount of electromotive force generated across a conductor when there is a change in the current flowing through it is defined as self-inductance.
The unit of inductance is the henry (H), with the symbol L.
What is the formula for the inductance of a coil?The inductance of a coil is given by the formula: L = E/(di/dt)
Where L is the inductance of a coil E is the voltage induced in the coil di/dt is the rate of change of current passing through the coil.
Thus, the inductance of a coil, if the coil produces an emf of 2.50 V when the current in it changes from -29.0 mA to 33.0 mA in 14.0 ms, is 0.146 H.
To know more about inductance of a coil refer here:
https://brainly.com/question/31388862#
#SPJ11
a guitar string oscillates with a frequency of 440 hz. if the air temperature is 20c how far apart are neighboring regions of compression in the sound wave that is created?
A guitar string oscillates with a frequency of 440 Hz and the air temperature is 20°C.
When a guitar string vibrates, it creates a sound wave. The sound wave that is produced by the guitar string is the sum of many individual waves that form the fundamental frequency and its harmonic overtones. The sound wave produced by the guitar string comprises areas of compression and rarefaction. Compression occurs when the air molecules are pressed together, whereas rarefaction occurs when the air molecules are pulled apart.
The wavelength of a sound wave can be calculated using the formula:
λ = v/f
where, λ = wavelength
v = velocity of sound in the medium
f = frequency of the sound wave
In this problem, the frequency of the sound wave is 440 Hz. At a temperature of 20°C, the velocity of sound in air is 343 m/s.
λ = 343 /440
λ = 0.78 m or 78 cm
Hence, the neighboring regions of compression in the sound wave that is created are 0.78 meters or 78 centimeters apart.
Learn more about frequency
brainly.com/question/15853432
#SPJ11
what electric field strength is needed to create a 6.0 a a current in a 1.7- mm m m -diameter iron wire?
The electric field strength needed to create a 6.0 A current in a 1.7-mm-diameter iron wire is 5.5 x 105 V/m.
The electric field strength needed to create a 6.0 A current in a 1.7-mm-diameter iron wire, we can use Ohm's law, which states that the voltage (V) equals the current (I) multiplied by the resistance (R).
Since the resistance of an iron wire is given by R=ρL/A, where ρ is the resistivity, L is the length of the wire, and A is its cross-sectional area, we can rearrange Ohm's law to get the voltage V=IR.
For the given wire, the cross-sectional area is A=πd2/4, where d is the diameter of the wire, the resistance to be R=ρL/(πd2/4).
V=IR, and rearranging to solve for I, we get I=V/R. The electric field strength needed to create a 6.0 A current in a 1.7-mm-diameter iron wire to be E=V/L=V/(ρL/A)=Vπd2/(4ρL).
The electric field strength needed for a given wire of any diameter and any length. However, for the given parameters, electric field strength to be E=6.0/(1.7 x 10-3 x 10-2/(4 x 10-7 x 8.0))=5.5 x 105 V/m.
The electric field strength needed to create a 6.0 A current in a 1.7-mm-diameter iron wire is 5.5 x 105 V/m.
to know more about electric field refer here:
https://brainly.com/question/15800304#
#SPJ11
which quantities should be gaphed on the vertical and horizontal axes to yield a striaght line whose slope could be used to calculate a numerical value for the acceleration due to gravvity g?
To determine g, you must graph distance vs. time squared. When you draw a straight line that passes through the origin of this graph, you can use the slope of the line to determine the acceleration due to gravity g.
To yield a straight line whose slope could be used to calculate a numerical value for the acceleration due to gravity g, the quantity that should be graphed on the vertical axis is the distance (d) and the quantity that should be graphed on the horizontal axis is the time (t). Gravity acceleration, denoted by the letter "g," is the rate at which a falling object increases its speed. A constant acceleration is generated by gravity acceleration, and it is used to describe falling bodies. In any experiment to determine the acceleration due to gravity g, the distance an object travels over a period of time must be measured, recorded, and plotted.
The equation to use for measuring the distance d is: d = 1/2gt^2. The above equation shows that distance d depends on the time t and gravity acceleration g. We can rewrite the equation to give the acceleration due to gravity g by dividing both sides by t^2:g = 2d/t^2. Therefore, to determine g, you must graph distance vs. time squared.
Learn more about acceleration : https://brainly.com/question/26408808
#SPJ11
if 6 j of work are needed to stretch a spring from 7 cm to 9 cm and 10 j are needed to stretch it from 9 cm to 11 cm, what is the natural length of the spring?
The natural length of the spring is 5 cm.
Given dataThe amount of work done to stretch a spring from 7 cm to 9 cm is 6 J.The amount of work done to stretch a spring from 9 cm to 11 cm is 10 J.
The formula for potential energy stored in a spring is
U=12kx2
Here,
U is potential energy stored in a spring
k is a spring constantx is the displacement of the spring from its natural length
U = 12kx2
Thus, U is proportional to x2
For the first stretching, we have
U1 = 12k(0.02)2
For the second stretching, we have
U2 = 12k(0.02)2
The difference in the amount of work done to stretch a spring is proportional to the difference in the potential energy stored in the spring.
So,U2 - U1 = 10 J - 6 J= 4 J= 12k(0.02)2 - 12k(0.02)2= 12k(0.04)k = 4/3
The natural length of the spring is given by x0 = U/k
Here, U is the potential energy stored in a spring when stretched by x So, the natural length of the spring is
x0 = 12kx02x0 = 12(4/3)(0.05)2x0 = 5 cm
Therefore, the natural length of the spring is 5 cm.
You can learn more about lenght at
https://brainly.com/question/28108430
#SPJ11
write a symbolic expression that gives the centripetal acceleration on the edge of the platform as a function of time, ac(t) .
The symbolic expression that gives the centripetal acceleration on the edge of the platform as a function of time, ac(t) is: `ac(t) = -rω²sin(ωt)`
The centripetal acceleration of an object moving in a circular path is always directed toward the center of the circle. The value of centripetal acceleration can be calculated by the formula:`ac = (v²) / r`
Here, v represents the linear velocity of the object and r is the radius of the circular path. In terms of angular velocity, the centripetal acceleration can be written as:'ac = rω²`. Therefore, the centripetal acceleration on the edge of the platform can be written as:`ac(t) = rω²sin(ωt)`
Here, ω represents the angular velocity of the platform. The negative sign indicates that the acceleration is directed toward the center of the circle.
You can learn more about centripetal acceleration at: brainly.com/question/14465119
#SPJ11
we already know that the electric field varies as the square of the distance between two point charges. why do the equations for the electric field above vary as distance cubed in the denominator?
The electric field of two point charges is inversely proportional to the cube of the distance between the two charges. This is because the electric field decreases exponentially with the increase in distance. Therefore, the equation for electric field varies as distance cubed in the denominator.
The electric field is an electric force that affects the space around electric charges. The cause of the electric field is the presence of positive and negative electric charges. The electric field can be described as lines of force or field lines.
The inverse square law states that the electric field at any point decreases as the square of the distance from the source. This means that the electric field decreases faster as the distance between two charges increases. Therefore, the equation for the electric field varies as distance cubed in the denominator to reflect this exponential decrease.
Learn more about inverse square law at https://brainly.com/question/30404562
#SPJ11
1. did the kinetic or static frictional coefficient vary with normal force? give your conclusions and support them based on your simulation results from parts a and b.
The kinetic frictional coefficient remains relatively constant with changes in normal force, while the static frictional coefficient increased with increasing normal force.
It can be varied due to following reasons:
The static frictional coefficient does not vary with normal force.The kinetic frictional coefficient varies with normal force.In the simulation, the force required to move a block on a horizontal surface was constant until the threshold force was reached, indicating that the static frictional coefficient is independent of the normal force.In the simulation of a block on an inclined surface, the force required to keep the block moving at a constant velocity increased as the angle of incline increased, indicating that the kinetic frictional coefficient is dependent on the normal force.Other factors such as surface roughness, deformation of materials, and temperature can also influence the coefficient of friction.To learn more about the frictional coefficient:
https://brainly.com/question/14121363
#SPJ11
how far will a rock travel if it is thrown upward at an angle of 35.00 with respect to the horizontal and with a speed of 21.3 m/s? what is the maximum range that can be achieved with the same initial speed?
The maximum range that can be achieved with the same initial speed is 69.6 m.
The distance that a rock will travel when thrown upward at an angle of 35.00 with respect to the horizontal and with a speed of 21.3 m/s is determined by the equations of projectile motion.
The maximum range that can be achieved is calculated by using the equation for the range of a projectile, which is R = (V2sin2θ)/g,
where V is the initial speed (21.3 m/s in this case), θ is the angle with respect to the horizontal (35.00 in this case), and g is the acceleration due to gravity (9.8 m/s2). The range can be calculated to be 69.6 m.
The motion of the rock can be broken down into two components:
the vertical component, which is determined by the equation h = (Vsinθ)t - ½gt2, and the horizontal component, which is determined by the equation x = Vcost.
The maximum height that the rock reaches is calculated by substituting t = (Vsinθ)/g into the equation for the vertical component, resulting in hmax = (V2sinθ)/2g.
As the rock falls back to the ground, the time taken for it to reach the ground is calculated by substituting hmax into the equation for the vertical component, resulting in ttotal = 2(Vsinθ)/g.
The range of the projectile is then calculated by substituting ttotal into the equation for the horizontal component, resulting in the equation for the range of a projectile given above.
The distance that a rock will travel when thrown upward at an angle of 35.00 with respect to the horizontal and with a speed of 21.3 m/s is determined by the equations of projectile motion,
and the maximum range that can be achieved with the same initial speed is 69.6 m.
to know more about speed refer here:
https://brainly.com/question/28224010#
#SPJ11
a ball is thrown vertically upward from a height of 4 feet with an initial velocity of 50 feet per second. how high will the ball go?
The ball will reach a maximum height of 86 feet.
The ball is thrown vertically upward with an initial velocity of 50 feet per second.
Using the equation v2 = u2 + 2as, the maximum height that the ball will reach can be calculated as:
s = (v2 - u2) / 2a
where s is the maximum height, v is the final velocity, u is the initial velocity, and a is the acceleration due to gravity (9.81 m/s2).
Plugging in the values for u and v, we get s = (502 - 02) / 2(9.81) = 86 feet.
Therefore, the maximum height the ball will reach is 86 feet.
To know more about the maximum height click here:
https://brainly.com/question/11535666
#SPJ11
if the ball is in contact with the floor for 0.0300 seconds, what is the average force (in n) the floor exerts on the ball?
When the ball is in contact with the floor for 0.0300 seconds, the average force (in N) the floor exerts on the ball is 0 N. F = (Δp) / Δt
where Δp is the change in momentum of the ball and Δt is the time interval during which the change in momentum occurred.
Δp = mvf - mvi
where mvf is the final velocity of the ball and mvi is the initial velocity of the ball.
In this case, the ball is dropped from a certain height and comes to rest on the ground. This means that its initial velocity (mvi) is zero.
Hence:Δp = mvf - mvi
= mvf - 0
= mvf
The momentum is conserved in the vertical direction, which means that the final momentum (mvf) of the ball after bouncing is equal in magnitude but opposite in direction to its initial momentum.
Hence: mvf = - mvi
= - m * v0
where m is the mass of the ball and v0 is its initial velocity (which is zero).
Substituting the above expression for mvf into the equation for the average force:
F = (- m * v0) / Δt
where Δt = 0.0300 seconds is the time interval during which the change in momentum occurred.
F = (- m * v0) / Δt
= (- 0.250 kg * 0) / 0.0300 seconds
= 0 N
Therefore, the average force (in N) the floor exerts on the ball is 0 N.
To know more about momentum:
https://brainly.com/question/29598011
#SPJ11
x rays with initial wavelength 0.0679 nm undergo compton scattering. at which scattering angle is this wavelength observed?
The wavelength observed after Compton scattering for x-rays with an initial wavelength of 0.0679 nm is observed at a scattering angle of 140.0°.
Compton scattering is the interaction of a photon with an atomic electron that results in a decrease in the photon's energy and an increase in the scattered photon's wavelength.
The change in wavelength of the scattered photon can be calculated using the formula:
λ = λ0/(1 + (λ0/h)*(1-cosθ)), where λ0 is the initial wavelength, h is Planck's constant, and θ is the scattering angle.
Given initial wavelength λ0 = 0.0679 nm and Planck's constant h = 6.63*10^-34 J*s.
λ0 = 0.0679 nm = 6.79×10^-11 m
h = 6.63×10^-34 J·s
[tex]λ = λ0/(1 + (λ0/h)(1-cosθ))λ = 6.79×10^-11/(1 + (6.79×10^-11/6.63×10^-34)(1-cosθ))λ = λ06.79×10^-11/(1 + (6.79×10^-11/6.63×10^-34)*(1-cosθ)) = 6.79×10^-111 + (6.79×10^-11/6.63×10^-34)*(1-cosθ) = 1/(6.79×10^-11)cosθ = 1 - (1/(1 + (6.79×10^-11/6.63×10^-34)*(1/(6.79×10^-11))))cosθ = 0.252θ = cos^-1(0.252)θ = 140.0°[/tex]
Therefore, the wavelength observed after Compton scattering for x-rays with an initial wavelength of 0.0679 nm is observed at a scattering angle of 140.0°.
To know more about the scattering angle click here:
https://brainly.com/question/29806315
#SPJ11
what normal force does a horizontal table exert on a 3.5 kg book that sits at rest? be sure to draw a diagram.
The normal force (F⃗n) exerted by the horizontal table on the 3.5 kg book that sits at rest is equal to the weight (mg) of the book is 34.335 N.
The weight of the book is equal to 3.5 kg * 9.8 m/s2 = 34.3 N.
Therefore, the normal force (F⃗n) of the table on the book is equal to 34.3 N.
The normal force that a horizontal table exerts on a 3.5 kg book that sits at rest is equal to the gravitational force acting on the book. This force is given by the product of the mass of the book and the acceleration due to gravity. Therefore, the normal force is calculated as follows:
Fnormal = mg
Where:
Fnormal: Normal force
m: Mass of the book
g: Acceleration due to gravity
Substituting the given values, we have:
Fnormal = (3.5 kg)(9.81 m/s²)
Fnormal = 34.335 N
Therefore, the normal force exerted by the table on the book is 34.335 N.
For more such questions on force , Visit:
https://brainly.com/question/12785175
#SPJ11
which of the following is an advantage of digital imaging? increased patient radiation exposure, increased chemical usage, increased speed for viewing images
One of the advantages of digital imaging is increased speed for viewing images.
Digital imaging is a technology that enables doctors to take X-rays, MRIs, CT scans, and other medical images, and store them digitally.
Digital imaging provides many advantages over traditional film-based imaging, such as increased speed for viewing images.
Digital imaging is a medical technology that allows physicians to take, store, and view medical images in digital form. Digital imaging includes modalities such as X-rays, computed tomography (CT), magnetic resonance imaging (MRI), and ultrasound.
Digital imaging provides several benefits, such as increased speed, improved diagnostic accuracy, lower radiation exposure, and reduced chemical usage. It also enables doctors to view images in real-time, making it easier to detect and diagnose medical conditions.
Additionally, digital images can be easily shared between medical professionals, allowing for better communication and collaboration.
The advantages of digital imaging include increased speed for viewing images. Instead of waiting for film-based images to be developed, doctors can view digital images instantly. This can be particularly important in emergency situations, where time is critical.
Digital imaging also allows doctors to manipulate images, zooming in or out as needed, to get a clearer view of the affected area or to identify specific features or abnormalities.
To know more about digital imaging, refer here:
https://brainly.com/question/321434#
#SPJ4
a 70.0-g arrow, fired at a speed of 115 m/s to the left, impacts a tree, which it penetrates to a depth of 12.2 cm before coming to a stop. assuming the force of friction exerted by the tree is constant, what are the magnitude and direction of the friction force acting on the arrow?
The magnitude of the friction force is 0.788 N and it is directed to the right.
The friction force acting on the arrow is equal to the force required to stop the arrow and is directed opposite the direction of motion.
The magnitude of the friction force is equal to the product of the mass of the arrow (70.0 g) and the deceleration of the arrow (11.2 cm/s^2).
When the arrow hits the tree, the friction force of the tree will slow down the arrow's motion. The magnitude of this friction force is equal to the product of the mass of the arrow (70.0 g) and the deceleration of the arrow (11.2 cm/s^2).
The direction of the friction force will be opposite to the direction of the arrow's motion.
Therefore, the magnitude of the friction force is 0.788 N and it is directed to the right. This is because the arrow was fired to the left and the friction force must be equal and opposite in order to bring the arrow to a stop.
To know more about friction force click on below link:
https://brainly.com/question/30280752#
#SPJ11
a rifle fires a bullet. which of the objects has the largest magnitude of momentum upon being shot? assume the external forces are negligible.
The rifle would have the largest magnitude of momentum upon firing a bullet.
What is momentum?
The momentum of an object can be defined as the product of its mass and velocity in the same direction.
What is the formula for momentum?
The formula for momentum is given as:
p = mv
Where, p = momentum = mass, v = velocity
What is the significance of momentum?
Momentum has both magnitude and direction. Momentum is significant because it is conserved. According to the Law of Conservation of Momentum, the total momentum of an isolated system remains constant if no external force is applied.
How would a rifle firing a bullet have the largest magnitude of momentum?
A rifle fires a bullet, and the bullet moves in the opposite direction. As a result, the rifle recoils. The magnitude of the bullet's momentum is equal to the magnitude of the rifle's recoil momentum, but they have opposite directions.
The rifle, on the other hand, would have the greatest magnitude of momentum upon firing a bullet. This is due to the fact that the rifle has a larger mass than the bullet. As a result, the rifle has more momentum.
Learn more about Momentum here:
https://brainly.com/question/30487676#
#SPJ11
some materials feel colder than others because...
Well, materials may feel colder than others because they could:
Be stored in cold temperaturesUndergroundNext to the oceanIn the oceanSo those are why they may feel colder
But . . .
Some items could be hotter becuase:
Near hot source ( volcano )Gas pockets ( that realese hot “ temperatures “Those are my reasons why they can either be colder or hotter
A spring-loaded toy gun is used to shoot a ball straight up in the air. (Figure 1) The ball reaches a maximum height H, measured from the equilibrium position of the spring.
-The same ball is shot straight up a second time from the same gun, but this time the spring is compressed only half as far before firing. How far up does the ball go this time? Neglect friction. Assume that the spring is ideal and that the distance by which the spring is compressed is negligible compared to H.
The maximum height H reached by the ball when the spring is compressed to its full extent is determined by the elastic potential energy stored in the spring, which is equal to the kinetic energy of the ball at the highest point of its trajectory. Therefore, we can write:
(1/2) k [tex]x^2[/tex] = m g H
where k is the spring constant, x is the compression distance of the spring, m is the mass of the ball, and g is the acceleration due to gravity.
When the spring is compressed to only half its full extent, the compression distance x is also halved, and the stored elastic potential energy becomes one-fourth of its original value. Since the mass and the acceleration due to gravity remain the same, we can write:
(1/2) k[tex](x/2)^2[/tex] = m g H'
where H' is the maximum height reached by the ball in the second shot.
Solving for H', we get:
H' = H/4
Therefore, the ball goes up to one-fourth of its maximum height in the second shot, which is equivalent to a height of H/4.
For more details about height click here:
https://brainly.com/question/10726356#
#SPJ11
assuming that the magnetic field is uniform between the pole faces and negligible elsewhere, write an expression for the induced emf in the coil.
The induced EMF (electromotive force) in a coil can be calculated using Faraday's Law of Electromagnetic Induction:
EMF = -N(dΦ/dt)
What is the induced emf?In a uniform magnetic field, the flux through the coil can be calculated as:
Φ = BAcos(θ)
where B is the magnitude of the magnetic field, A is the area of the coil, and θ is the angle between the magnetic field and the normal to the coil.
Assuming that the coil is moving perpendicular to the magnetic field (θ = 0), the rate of change of flux is:
dΦ/dt = BA(d/dt)(cos(0))
= 0
Therefore, the induced EMF in the coil is zero.
However, if the coil is moving at an angle to the magnetic field, or if the magnetic field is changing in time, then the induced EMF will not be zero and can be calculated using the above equations.
Learn more about induced emf:https://brainly.com/question/16764848
#SPJ1
A mass of 0.450 kg rotates at costant speed with a period of 1.45s at a radius R of 0.140 m in the apparatus used in this laboratory. What is the rotation period for a mass of 0.550 kg at the same radius? Show your work. (Extra information that might or might not be important: For the apparatus used in this laboratory, the centripetal force is the same for a fixed radius R of rotation. This wasn't stated in this question but it was in the question before it.)
Rotation period for a mass of 0.550 kg at the same radius is 1.45 s.
The rotation period of a mass in circular motion is given by:
T = 2πR/v
where T is the period, R is the radius of the circular path, and v is the velocity of the mass.
For the first mass with a mass of 0.45 kg, radius R of 0.140 m, and period T of 1.45 s, we can calculate the velocity as follows:
v = 2πR/T = 2π(0.140 m)/(1.45 s) = 0.6066 m/s
Now, we can use the velocity and radius values to find the period for the second mass with a mass of 0.550 kg:
T = 2πR/v = 2π(0.140 m)/(0.6066 m/s) = 1.45 s
Therefore, the rotation period for a mass of 0.550 kg at the same radius is 1.45 s.
learn more about 'rotation':https://brainly.com/question/16931421
#SPJ11
jake is traveling west on a highway. at 1:00 pm, jake passes the mile marker 485. at 4:30 pm, he passes mile marker 154. what is jake's average velocity?
Jake's average velocity is 94.57 miles/hour if he passes mile marker 485 at 1:00 pm and mile marker 154 at 4:30 pm.
The formula for calculating the average velocity is Δd/Δt, where Δd represents the change in position and Δt represents the change in time. The change in position is the distance between the two-mile markers can be calculated as:-
485 miles - 154 miles = 331 miles.
The change in time is the difference between the two times can be calculated as:-
4:30 pm - 1:00 pm = 3.5 hours.
Now substitute the values into the formula:-
Average velocity = Δd/Δt = 331 miles / 3.5 hours = 94.57 miles per hour.
Therefore, Jake's average velocity is 94.57 miles per hour.
Learn more about average velocity: https://brainly.com/question/28668011
#SPJ11
A student heats 5 kg of water from 15 0C to 100 0C. How much heat is added to the water?
The specific heat of water is about 4,000 J/kg 0C.
The student added 1,700,000 Joules of heat to the water.
What is Specific Heat?
Specific heat is the amount of heat energy required to raise the temperature of one unit mass of a substance by one degree Celsius (or Kelvin) without any change in phase. It is a physical property of a substance that is unique to each material and depends on its molecular structure and composition. The specific heat of water, for example, is 4.18 J/g°C, which means that it takes 4.18 joules of energy to raise the temperature of one gram of water by one degree Celsius.
The heat added to the water can be calculated using the formula:
Q = m * c * ΔT
where Q is the heat added, m is the mass of the water, c is the specific heat of water, and ΔT is the change in temperature.
Substituting the given values:
m = 5 kg
c = 4,000 J/kg°C
ΔT = (100°C - 15°C) = 85°C
Q = 5 kg * 4,000 J/kg°C * 85°C = 1,700,000 J
Therefore, the student added 1,700,000 Joules of heat to the water.
Learn more about Specific Heat from given link
https://brainly.com/question/27991746
#SPJ1
2. Use Evidence Based on your results in this activity, describe the characteristics of a circuit
that would carry the maximum amount of electric current. Include characteristics such as
voltage, wire diameter, wire length, wire temperature, and wire material.
A circuit that minimizes resistance will be able to carry the maximum amount of current.
What is Current?
It is defined as the amount of electric charge passing through a given point in a circuit in unit time. The SI unit of electric current is the ampere (A), which is defined as one coulomb of electric charge per second. Electric current can be either direct current (DC), which flows in one direction only, or alternating current (AC), which changes direction periodically.
Based on the results of this activity, a circuit that would carry the maximum amount of electric current should have:
High voltage: A higher voltage will cause a greater potential difference and push more electrons through the circuit.
Thicker wire diameter: A thicker wire diameter will have lower resistance, allowing more current to flow through the wire.
Shorter wire length: A shorter wire length will have lower resistance, allowing more current to flow through the wire.
Lower wire temperature: A lower wire temperature will have lower resistance, allowing more current to flow through the wire.
Learn more about Current from given link
https://brainly.com/question/1100341
#SPJ1
what is the acceleration on a body that approached the arth and comes within 6 earth radii of the earth's surface
The acceleration on a body that approaches the Earth and comes within 6 Earth radii of the Earth's surface is known as the "gravitational acceleration."
This is caused by the gravitational pull of the Earth, which increases as the body approaches the Earth's surface. The acceleration is given by the equation a = GM/r², where G is the gravitational constant, M is the mass of the Earth, and r is the distance from the center of the Earth. For a body that comes within 6 Earth radii of the Earth's surface, the acceleration would be equal to GM/36, where G is the gravitational constant and M is the mass of the Earth. This acceleration can be used to calculate the velocity of the body and its trajectory around the Earth.
For more questions on gravitational acceleration
https://brainly.com/question/14374981
#SPJ11
A bird in a tree vocalizes a sound that has a wavelength of 23 meters when the speed of sound is 338 m/s. What is the frequency of the sound the bird is making and can a normal human hear the bird?
Using the above values for the speed of sound and wavelength, the frequency of the sound produced by the bird in the tree is determined to be 14.7 Hz. A typical person is unlikely to be able to hear this sound.
How can you calculate a sound wave's frequency from its wavelength?As with all waves, the relationship between the frequency and wavelength of sound is and its wavelength.
Does sound have a formula?The following equation can be used to calculate sound intensity: P stands for pressure change or amplitude, D stands for material density, and VW stands for measured sound speed. The more your sound wave oscillates, the louder your sound will be.
To know more about wavelength visit:-
https://brainly.com/question/13533093
#SPJ9
what is the likely reason that ammeters are connected in series, before or after a circuit component, to measure current?
Connecting an ammeter in series before or after a circuit component is the preferred method for measuring current because it allows for accurate readings, does not interfere with the circuit, and does not add any additional resistance to the circuit.
This is beneficial because it allows you to measure the current without having to alter the circuit.By connecting an ammeter in series, the current flows through it and the amount of current can be measured. This is due to the fact that when current is present in a circuit, it has to flow through every component of the circuit. By connecting the ammeter in series, the current will flow through the ammeter and the amount of current can be measured. Moreover, by connecting the ammeter in series, the amount of current through the circuit can be determined without disrupting the circuit or changing the current. This is because when an ammeter is connected in series, it does not interfere with the flow of current and does not add any resistance to the circuit. Furthermore, an ammeter connected in series allows for more accurate readings because the entire current is measured, not just a fraction of it.
For more questions related to ammeter.
https://brainly.com/question/30849022
#SPJ11
Isabella makes an electromagnet by wrapping copper wire around an iron bolt and then connecting each end of the wire to a battery. She observes that the more times that she wraps the copper wire around the bolt, the more paper clips her magnet can pick up. What does she conclude in this experiment?
Wrapping more copper wire around the bolt increases the length of the bolt.
Wrapping more copper wire around the bolt increases the density of copper.
Wrapping more copper wire around the bolt increases the mass of the battery.
Wrapping more copper wire around the bolt increases the strength of her electromagnet.
Isabella concludes that wrapping more copper wire around the bolt increases the strength of her electromagnet. The copper wire, when connected to a battery, creates a magnetic field around the iron bolt
What is magnetic ?Magnetic is a material or object that produces a magnetic field. A magnetic field is a force that attracts or repels certain materials, such as iron, nickel, and cobalt. Magnets can be found in a variety of shapes and sizes, including bar magnets, horseshoe magnets, and disc magnets.
Magnets have two poles, a north pole and a south pole, which are opposite in polarity. Like poles repel each other, while opposite poles attract. When a magnet is broken into pieces, each piece will have its own north and south pole.
Magnets are used in a variety of applications, such as in generators, motors, speakers, and magnetic storage devices like hard drives. They are also used in medical imaging technologies, such as magnetic resonance imaging (MRI), which uses strong magnetic fields to produce detailed images of the inside of the body.
To know more about magnets visit :
https://brainly.com/question/13026686
#SPJ1