What happens in radioactive decay?

Answer:

eight because I think it's eight

Answer:

water

Explanation:

The only by-products from combining hydrogen and oxygen in a fuel cell are water and heat, so hydrogen fuel cells do not emit greenhouse gases or other air pollutants as engines that use fossil fuels do.

Answer:

Refer to explanation

Explanation:

Weather is the main cause behind most short term environmental changes

For example, a period of heavy rain may lead to a pond overflowing, and flooding the nearby shrubbery

Animals in the area would adapt to this by trying to keep away from the flooded area until it dries out, once the rain ends

Answer: C

Explanation:

C just because the other choices dont really make sense. They use these fibers as a way to see what clothes, shoe strings, carpets, etc was there it help identify a person at the scene. Hope this helps!!

A solution with a pH of 13.8 means that the solution is a strong base.

pH refers to power of hydrogen. The pH is a scale used to measure the degree of acidity or alkalinity of a solution.

pH scale ranges from 0 - 14

Where;

However, the closer the pH value is to 1, the more the acidity and vice versa while the closer it is to 14, the more the alkalinity and vice versa.

Therefore, a solution with a pH of 13.8 means that the solution is a strong base.

Learn more about pH at: https://brainly.com/question/15289741

Answer:

1.4 moles/ 2.0 L= 0.7 M

Explanation: Molarity= moles of solute/ Liters of solution

therefore just plug the numbers in and you'll find the molarity to equal. 0.7

When the initial concentration of crystal Violet is double, the rate of the reaction will rise up about four times the initial rate.

The rate of a chemical reaction refer to the rate of change in concentration of the reaction over the change in time. Introduction.

When you double the concentration the rate doubles. The rate is proportional to the square of the concentration of a reactant. When the rate is doubled the concentration rate goes up four times. The rate is not affected by the concentration of a reactant.

Learn more about rate of chemical reaction here.

https://brainly.com/question/24795637

When doubling the initial concentration of crystal violet, the rate will increase four times.

The rate doubles when the concentration is doubled.

The rate is proportional to the square of a reactant's concentration. When the concentration is doubled, the rate increases fourfold.

The concentration of a reactant has no effect on the rate.

Thus, when doubling the initial concentration of crystal violet, the rate will increase four times.

Learn more about the rate of reaction

https://brainly.com/question/8592296

#SPJ4

Based in the equation of the reaction, oxygen gas, O2 is the limiting reactant and 2 moles of CO remain unreacted

The reaction of carbon(ii) oxide, CO and oxygen, O2 is a redox reaction which produces carbon (iv) oxide, CO2.

The equation of the reaction. is given below:

From the equation of the reaction, 2 moles of CO are required to react with 1 mole of O2 to produce 2 moles of CO2

The moles of the reacting substances is calculated using the formula:

Molar mass of CO = 28 g

Moles of CO = 112/28 = 4 moles

Molar mass of 02 = 32 g

Moles of O2 = 32/32 = 1 mole

Therefore, oxygen gas, O2 is the limiting reactant and 2 moles of CO remain unreacted.

Learn more about limiting reactant at: https://brainly.com/question/14225536

Answer:

In summary, a real gas deviates most from an ideal gas at low temperatures and high pressures. Gases are most ideal at high temperature and low pressure. What factors attributes to the deviation of gas law from the ideal gas theory?

Explanation:

Real gases deviate the most from the ideal gas law under low temperature and high pressure.

Ideal gas laws say about hypothetical gases, the collision between the molecules of an ideal gas would be perfectly elastic.

There are three variables of an ideal gas, absolute temperature, pressure, and volume.

PV = nRT

Thus, real gases deviate the most from the ideal gas law under low temperature and high pressure.

Learn more about  ideal gas laws

https://brainly.com/question/13821925

#SPJ4

Answer:

Negative impacts include: noise, air and odour pollution from collection and reprocessing facilities; costs to set up recycling infrastructure and education materials for new areas; and costs associated with innovations and technologies, which are likely to be passed on to end consumers in product prices.

Explanation:

Answer:

it's is math that you can answer with your sister and your mother

Answer:

346 degrees because 326+20= 346

The jumper's potential energy at a height of 1524 meters above the ground is equal to 836,371.2Joules.

Given the following data:

Mathematically, potential energy is given by this formula:

[tex]P.E = mgh[/tex]

Where:

Substituting the given parameters into the formula, we have;

[tex]P.E = 56 \times 9.8 \times 1524[/tex]

P.E = 836,371.2Joules.

Read more on potential energy here: https://brainly.com/question/1242059

Answer:

1. mechanical energy

2. Kinetic energy

3. Energy

4. Work

5. potential energy

Explanation:

1. The total amount of mechanical energy is merely the sum of the potential energy and the kinetic energy. This sum is simply referred to as the total mechanical energy 
2. All moving objects have kinetic energy. When an object is in motion, it changes its position by moving in a direction: up, down, forward, or backward.

3. Energy is defined as the ability to cause changes in matter. You can change energy from one form to another when you lift your arm or take a step. In each case, energy is used to move matter — you. The energy of moving matter is called kinetic energy.

4. transfer of energy that occurs when a force makes an object move. For work to occur, an object must move. The motion of the object must be in the same direction as the applied force on the object.

5. potential energy is the energy that is stored in an object due to its position relative to some zero position. An object possesses gravitational potential energy if it is positioned at a height above (or below) the zero height.

Methane in fuel cells are not burned and therefore, help to reduce pollutants commonly associated with fossil fuel combustion.

Fossils fuels are fuels wgich are produced from fossils which have decomposed under intense heat and pressure over a long period of time.

Fossils fuels include:

Fossils fuels combustion release pollutants into the atmosphere and have greatly contributed to global warming.

Since methane in fuel cells are not burned, it will help to reduce pollutants commonly associated with fossil fuel combustion.

Learn more about fossil fuels at: https://brainly.com/question/79954

The coefficients which correctly balance the formula for the equation of reaction of NH₄ and NO₂ is 1,1,1,2.

This is the type of reaction in which the atoms of the elements of the reactants equal that of the product.

The balanced reaction is seen below where 2 was added to H₂O so as to balance the atoms of oxygen on both sides.

NH₄ + NO₂ (s) ⇒ N₂ (g)+2H₂O(l)

Read more about Balanced Chemical reaction here https://brainly.com/question/15355912

Answer:

Cycle

Explanation:

Water on the earth is constantly on the move, it recycles over and over again. This movement is called the water cycle. Precipitation occurs when there is so much water in the air it cannot hold onto it anymore. It will rain, snow, sleet or hail. It fills up our lakes, streams and oceans on the surface of the earth.

The  standard change in free energy is -35.76 kJ/mol. Values of standard free energy are obtained from thermodynamic tables.

The standard change in free energy can  be obtained using the relation;

ΔG°= ΔH° - TΔS

When;

ΔH°f(HI) = 26.466 kJ/mol

ΔH°f(H2) = 0 kJ/mol

ΔH°f(I2) = 0 kJ/mol

ΔS°f(HI) = 221.63 J/K/mol

ΔS°f(H2) = 145.64 J/K/mol

ΔS°f(I2) = 0 J/K/mol

Hence;

ΔH°freaction = [ 2(26.466)] - 0

= 52.932 kJ/mol

ΔS°freaction = [2(221.63 ) ] - [145.64 + 0]

= 443.26 - 145.64 = 297.62 J/K/mol

ΔG°= 52.932 * 10^3 - [298 * 297.62 ]

ΔG°= -35.76 kJ/mol

The  standard change in free energy is -35.76 kJ/mol.

Learn more about change in free energy: https://brainly.com/question/14143095

The change in free energy for the given chemical reaction between hydrogen and iodine gas is -31.068 kJ/mol.

Free energy change of any reaction will be calculated by using the below equation:

ΔG° = ΔH° - TΔS, where

ΔH° = change in enthalpy

T = absolute temperature = 298K

ΔS = change in entropy

Change in any quantity during the reaction will be find out by substracting the reactant values from product values.

Given chemical reaction is:

H₂(g) + I₂(g) → 2HI(g)

ΔH° = 2(26.466)] - 0 = 52.932 kJ/mol

ΔS = [2(206.6) ] - [131 + 0] = 413.2 - 131 = 282.2 J/K.mol = 0.282 kJ/K.mol

On putting values on above equation, we get

ΔG° = 52.932 - (298)(0.282) = -31.068 kJ/mol

Hence required free enrgy is -31.068 kJ/mol.

To know more about free energy change, visit the below link:

https://brainly.com/question/7600523

#SPJ4

Based on the observations of the students, the soil they observed appears to be a sandy soil.

What is Foamy?

Foamy refers to the presence of bubbles or foam in a liquid or substance. It can be caused by a variety of factors, such as agitation, the presence of certain chemicals, or the release of gases. In the context of the soil observation mentioned earlier, the lack of foamy reaction with vinegar suggests that the soil does not contain a significant amount of carbonates, which are a common cause of foaming when they react with acids.

Evidence to support this includes the fact that the soil is gritty when dry and sticks to their fingers when wet, which are both common characteristics of sandy soil. Additionally, the observation that the soil does not get foamy with vinegar suggests that it does not contain a lot of organic matter, which is another characteristic of sandy soil. Finally, the fact that the damp soil made a ball but it fell apart quickly suggests that the soil does not have a lot of clay, which is another characteristic of sandy soil.

Learn more about Foamy from the given link

https://brainly.com/question/17627356

#SPJ1

From the options, the statement ththat describes an acid - base reaction in the Arrhenius sense is; "an acid base reaction where one compound is donating an H+ and one atom is accepting an H+."

The Arrhenius definition of a base is that a base is a substance that releases hydroxide ions as its only negative ions in solution. An acid is a substance that produces hydrogen ions as its only positive ions in solution.

If we look at the definitions shown here, the only one that accurately depicts acid - base reaction in the Arrhenius sense is "an acid base reaction where one compound is donating an H+ and one atom is accepting an H+."

Learn more about Arrhenius definition: https://brainly.com/question/7217496

The moles of water are used in the given reaction between CO₂ & H₂O is 12 moles.

Mass of any substance will be calculated by using their moles as:

n = W/M , where

W = given or required mass

M = molar mass

Given chemical reaction is:

6CO₂ + 6H₂O → C₆H₁₂O₆ + 6O₂

Moles of 528 g of CO₂ = 528g / 44.01g/mol = 11.99 moles

From the stoichiometry of the reaction, it is clear that:

6 moles of CO₂ = reacts with 6 moles of H₂O

So, 11.99 moles of CO₂ = reacts with 11.99 = 12 moles of H₂O

Hence option (a)is correct i.e. 12 moles.

To know more about moles, visit the below link:

https://brainly.com/question/15373263

Answer:

A

Explanation:

The number of atoms of nitrogen present in 137 grams of N₂O₃ in 2.1 × 10²⁴.

Avogadro's number is that number which tells about the number of atoms or entities of any substance present in one mole of any substance, i.e. 1 mole = 6.022 × 10²³

First we have to convert mass of N₂O₃ to moles by using the below formula:

n = W/M, where

W = given mass = 137g

M = molar mass = 76g/mol

Moles of N₂O₃ = 137 / 76 = 1.8mol

From the stoichiometry of the mass and formula it is clear that:

In 76g of N₂O₃ = 2 moles of Nitrogens are present

In 137g of N₂O₃ = 2/76×137=3.6 moles of Nitrogens are present

No. of N atoms in 3.6 moles = 3.6 × 6.022 × 10²³ = 2.1 × 10²⁴

Hence option (D) is correct.

To know more about Avogadro's number, visit the below link:

https://brainly.com/question/10614569

The mass of sulfurous acid produced when 245g of sulfur dioxide is reacted with water is 313.8 g

From the question, we are to determine the mass of sulfurous acid produced

First, we will write the balaced chemical equation for the reaction

H₂O + SO₂ → H₂SO₃

This means 1 mole of H₂O reacts with 1 mole of sulfur dioxide (SO₂) to produce 1 mole of sulfurous acid (H₂SO₃)

Now, we will determine the number of moles of sulfur dioxide present

Mass of sulfur dioxide present = 245 g

Molar mass of sulfur dioxide = 64.066 g/mol

Using the formula,

[tex]Number \ of \ moles = \frac{Mass}{Molar\ mass}[/tex]

Then,

Number of moles of SO₂ present = [tex]\frac{245}{64.066}[/tex]

Number of moles of SO₂ present = 3.824 moles

This is the number of moles of SO₂ present

From balanced chemical equation

1 mole of H₂O reacts with 1 mole of sulfur dioxide (SO₂) to produce 1 mole of sulfurous acid (H₂SO₃)

Then,

Water (H₂O) will react with the 3.824 moles of sulfur dioxide (SO₂) to produce 3.824 moles of sulfurous acid (H₂SO₃)

∴ The number of moles of sulfurous acid produced is 3.824 moles

Now, for the mass of sulfurous acid produced

Molar mass of sulfurous acid = 82.07 g/mole

Using the formula,

Mass = Number of moles × Molar mass

Mass of sulfurous acid produced = 3.824 × 82.07

Mass of sulfurous acid produced = 313.8 g

Hence, the mass of sulfurous acid produced is 313.8 g

Learn more on Stoichiometry here: https://brainly.com/question/6061451

Answer:

We balance chemical equations due to the law of conservation of mass, which states that mass can neither be created or destroyed. Therefore, in a chemical reaction, the total mass of the reactants must be equal to the total mass of the products. Balancing equations accounts for the total mass of the reactants and the total mass of the products.

Explanation:

We balance chemical equations due to the law of conservation of mass, which states that mass can neither be created or destroyed. Therefore, in a chemical reaction, the total mass of the reactants must be equal to the total mass of the products. Balancing equations accounts for the total mass of the reactants and the total mass of the products.

Answer:

to satisfy the law of conservation of matter.

the law of conservation states that matter can not be created nor destroyed.

It's sunny in new york, but it is cool, we will expect to find lizard under a rock or in a hole in the ground, where temperature is more than outside.

Lizards are not easily survive in the winter season as they are cold blooded animal, so their body will not active in the winter season.

During the winter season or in the cold weather, lizards will go to the places where they feel less cooling. And these places be like inside the rocks, under a hole, under the ground, in the trunks of trees, etc. due to high temperature.

Hence, options (1) and (4) are correct.

To know more about lizards, visit the below link:

brainly.com/question/407800

Answer:

The links are: the number of circles in the electronic configuration of an element is represented in the periodic table as the period number that element is situated in. the number of electrons in the outermost shell of an element is represented in the periodic table as the group number that element is situated in.

Explanation:

The percent yield obtained from the stoichiometry of the reaction when the moles of the reactants and products are known.

Stochiometry gives the relationship between the mass and mole or moles and volume in a reaction.

Q1)

K2PtCl4 + 2NH3 ----> Pt(NH3)2Cl2 +2KCl

Number of moles of NH3 = 34.5 g/17 g/mol = 2.03 moles

2 moles of NH3 yields 2 moles of KCl

2.03 moles  of NH3 yields 2.03 moles  of KCl

Theoretical yield of KCl =  2.03 moles * 75 g/mol = 154 g

Again,

2moles of NH3 yields 1 mole of Pt(NH3)2Cl2

2.03 moles  of NH3 yields 2.03 moles  * 1/2 = 1.015 moles

Mass of Pt(NH3)2Cl2 = 1.015 moles * 301 g/mol = 306 g

% yield =  76.4 g/306 g * 100/1 = 25%

Q2)

H3PO4 + 3 KOH ------> K3PO4 + 3 H2O

Number of moles of H3PO4  = 49.0 g/98 g/mol = 0.5 moles

If  mole of H3PO4  yield 1 mole of K3PO4

0.5 moles of H3PO4  yield 0.5 moles of K3PO4

Mass of K3PO4  = 212 g/mol * 0.5 moles = 106 g

Percent yield = 49.0 g/106 g * 100 = 46%

Q3)

Al2(SO3)3 + 6 NaOH ------> 3 Na2SO3 + 2 Al(OH)3

Number of moles of Al2(SO3)3 = 389.4 g/294 g/mol = 1.32 moles

If 1 mole of Al2(SO3)3 yields 3 moles of  Na2SO3

1.32 moles of Al2(SO3)3 yields 1.32 moles  * 3 moles/1 mole = 3.96 moles

Mass of Na2SO3 = 3.96 moles * 126 g/mol = 498.96 g

Percent yield = 212.4 g/498.96 g * 100/1 = 43%

Q4)

Al(OH)3(s) + 3 HCl(aq) -------> AlCl3(aq) + 3 H2O(l)

Number of moles of Al(OH)3 = 50.3 g/78 g/mol = 0.64 moles

If 1 mole of Al(OH)3 yields 1 mole of AlCl3

0.64 moles of Al(OH)3 yields 0.64 moles of AlCl3

Mass of AlCl3 = 133 g/mol * 0.64 moles = 85 g

Percent yield = 39.5 g/85 g * 100 = 46%

Q5) K2CO3 + 2HCl --------> H2O + CO2 + 2KCl

Number of moles of K2CO3 = 34.5 g/138 g/mol = 0.25 moles

1 mole of K2CO3  produces 2 moles of KCl

0.25 moles of K2CO3  produces 0.25 moles * 2 moles/1 mole = 0.5 moles

Mass of KCl = 0.5 moles * 75 g/mol = 37.5 g

If 1 mole of K2CO3  yields 1 mole of H2O

0.25 moles of K2CO3  yields 0.25 moles of H2O

Mass of H2O = 0.25 moles  * 18 g/mol = 4.5 g

Percent yield = 3.4 g/4.5 g *100 = 76%

Learn more about percent yield: https://brainly.com/question/12704041?

For a buffer is composed of 33. 80 ml of 0. 164 m acetic acid and 31. 63 ml of 0. 189 m sodium acetate,The volume of HCl is mathematically given as

v1=70.1148mL

Generally, the equation for the Chemical reaction is mathematically given as

HCl+CH3Coo-Na---->CH3CooH+NaCl

Therefore

Mole of HCl=34.37*0.204*10^-3

Mole of HCl=7.011*10^-{-3}

In conclusion

M1v1=m2v2

Therefore

[tex]v1=\frac{m2v2}{m1}\\\\v1=\frac{7.011*10^-{-3}}{0.1}[/tex]

v1=70.1148mL

Read more about Chemical reaction

https://brainly.com/question/16416932

70.114 ml of 0. 100 m HCl can be added before the buffer capacity is reached

Volume is the space occupied by a three-dimensional object.

The chemical reaction is

[tex]\rm HCl+CH_3Coo-Na---- > CH_3CooH+NaCl[/tex]

step1, calculate the moles of HCl

[tex]34.37 \times0.204\times 10^-3[/tex]

[tex]\rm Moles\; of\; HCL \;7.011\times 10^{-3}[/tex]

The given Volume 1 is 33.80 ml

The given volume 2 is 31.63 ml

By the formula, [tex]M_1V_1=M_2V_2[/tex]

Putting the values in the equation

[tex]0.164 \times 33.80 = 100 \times V_2\\\\V_2 = 70.114 ml.[/tex]

Thus, the final volume is 70.114 ml.

Learn more about volume

https://brainly.com/question/13338592

#SPJ4

v1=70.1148mL

the solution is an alkali

The hydroxide ion concentration of an aqueous solution with a ph of 3. 45 is  10⁻³·⁴⁵

PH is potential hydrogen. It helps in to determine the acidity and basicity of any solution.

To get the hydroxide ion concentration of an aqueous solution, the following formula will be used.

[tex]pH = -log^[^H^+^]\\pH=-log^[^H^3^O^+^]\\\\-log [^H^3^O^+^] - pH\\ 10 ^-pH = [H3O^+] \\\\H3O^+ = 10^-^3^.^4^5[/tex]

Thus, the hydroxide ion concentration is 10⁻³·⁴⁵

Learn more about pH

https://brainly.com/question/15289741

#SPJ4