What is current of 12 ohm? help me pleasee​

According to Hooke 's law

[tex]\\ \rm\rightarrowtail \nu=k\sqrt{\dfrac{\ell}{m}}[/tex]

[tex]\\ \rm\rightarrowtail \nu\propto \dfrac{1}{\sqrt{m}}[/tex]

Hence lower the mass higher the frequency

The right answer is Frequency. Option A

Frequency is defined as the number of wave oscillations per unit of time and is measured in hertz. Frequency is directly proportional to pitch. Distance from the rest position to maximum shaft deflection. Frequency The number of waves he passes through a particular point per second. Measures the time it takes for a wave cycle to complete.

Maximum displacement or distance traveled by a point on the vibrating body or shaft, measured from the equilibrium position. This corresponds to half the length of the vibration path. The frequencies are opposite. The number of wave cycles to complete per second. Both amplitude and wavelength are measures of distance. Amplitude measures the height of the wave crest from the centerline. Wavelength measures the horizontal distance between cycles.

Learn more about A wave vibrates here:-https://brainly.com/question/673791

#SPJ1

You have to find voltage first.

1000×8= 8000V

Then you use the formula P=IV

P=(8)(8000)

P=64,000 Watts

I think this is right

Explanation:

Multiply the time by the acceleration due to gravity to find the velocity when the object hits the ground. If it takes 9.9 seconds for the object to hit the ground, its velocity is (1.01 s)*(9.8 m/s^2), or 9.9 m/s

Answer:

800 feet per sec.

Explanation:

Converting it over from 105.1mph to ft per sec is only about 154.15fps.

The moment of inertia of a uniform solid sphere is equal to 0.448 [tex]kgm^2[/tex].

Given the following data:

Mass of sphere = 7 kg.

Radius of sphere = 0.4 meter.

Mathematically, the moment of inertia of a solid sphere is given by this formula:

[tex]I=\frac{2}{5} mr^2[/tex]

Where:

Substituting the given parameters into the formula, we have;

[tex]I=\frac{2}{5} \times 7 \times 0.4^2\\\\I=2.8 \times 0.16[/tex]

I = 0.448 [tex]kgm^2[/tex].

Read more on inertia here: https://brainly.com/question/3406242

The answer will be A The forces are balanced. Force is an external agent applied on any object to displace it from its position. Force is a vector quantity, so with magnitude it also requires direction.

Force is an external agent applied on any object to displace it from its position. Force is a vector quantity, so with magnitude it also requires direction. Direction is necessary to examine the effect of the force and to find the equilibrium of the force.

The length of each arrow represents the magnitude of each force, while the direction of each arrow represents the direction of each force.

From the diagram, we see that the four arrows have all same length: this means that the four forces have same magnitude, therefore they are balanced in pair. In fact:

On the vertical direction, the normal reaction ([tex]F_N[/tex]) balances the weight of the box ([tex]F_g[/tex])

On the horizontal direction, the push ([tex]F_P[/tex]) balances the force of friction ([tex]F_f[/tex])

Hence the answer will be A. the forces are balanced.

To know more about Force follow

https://brainly.com/question/25239010

Answer:

A is your answer.

Explanation:

Good luck on your exam!

Answer:

126 / 2 = 63 = angle between one rope and the direction of the resultant force

t = F cos 73 = .45 F      force on stump due to one horse

T = 2 t = .90 F       force on stump due to both horses - T would be the resultant of the two horses each pulling with force F

Answer:

C

Explanation:

65-35 = 30

30 divided by 5 = 6

The answer will be 6 m/s

Explanation:

c............ ......

...

Answer:c

Explanation: I took the identifying claims quick check and the answers are 1.yes it can be 2. No because it is an opinion 3.claims 4.it is prediction 5.both particles and waves 6.a wave model is most useful

Scientists use to describe electromagnetic radiation as It exhibits properties of both particles and waves. The correct option is B.

An electromagnetic wave is a type of wave that consists of oscillating electric and magnetic fields that travel through space at the speed of light.

Electromagnetic waves are produced by the movement of charged particles and are characterized by their frequency, wavelength, and amplitude.

Electromagnetic waves include a wide range of frequencies, which together form the electromagnetic spectrum. The spectrum includes radio waves, microwaves, infrared radiation, visible light, ultraviolet radiation, X-rays, and gamma rays. Each of these types of electromagnetic waves has a different frequency and wavelength, which determines its properties and how it interacts with matter.

Here in the question,

Scientists describe electromagnetic radiation as exhibiting properties of both particles and waves.

This is known as the wave-particle duality of electromagnetic radiation, which means that electromagnetic radiation can exhibit both wave-like and particle-like behavior depending on how it is observed or measured.

The wave-like behavior is described by its frequency, wavelength, and amplitude, while the particle-like behavior is described by its energy, momentum, and photons.

Therefore, The electromagnetic wave shows duality i.e both particle and wave properties.

To learn more about The electromagnetic wave click:

https://brainly.com/question/3101711

#SPJ3

The time period of the simple pendulum is 2.4 seconds.

Given the data in the question;

Period is the time needed for a complete cycle of vibration to pass a given point.

Period of a pendulum is the of time needed for it to complete one full back-and-forth motion. It is the time required to for the pendulum to swing from leftmost point to rightmost point and back to leftmost point.

Now, if it took the pendulum [tex]1.2s[/tex] to swing from leftmost point to rightmost point, it will also take the pendulum [tex]1.2s[/tex] to swing back to its original position( leftmost point )

Hence,

[tex]T[/tex] = time taken to swing from leftmost to rightmost + time taken to swing from rightmost point to leftmost point.

[tex]T = 1.2s + 1.2s\\\\T = 2.4s[/tex]

Therefore, the time period of the simple pendulum is 2.4 seconds.

Learn more about Time Period: https://brainly.com/question/27135322

The absence of external force in the outer space, allows the piece of rock to continue moving at the same velocity for thousands of years.

The outer space is almost an absolute vacuum, because it's nearly empty. There is no matter such as air in the outer space that will provide an external force needed to change the velocity of the piece of rock.

From Newton's first law of motion, an object in a state of rest or uniform motion in a straight line, will continue in that state unless it is acted upon by an external force.

Thus, the absence of external force in the outer space, allows the piece of rock to continue moving at the same velocity for thousands of years.

Learn more about outer space here: https://brainly.com/question/24701339

Answer:

inertia

Explanation:

Let's know the formula

[tex]\\ \rm\rightarrowtail T=2\pi \sqrt{\dfrac{l}{g}}[/tex]

So

[tex]\\ \rm\rightarrowtail T\propto \sqrt{l}[/tex]

Hence if length is doubled time period will be √2 times

#2

Decrease by 5% will decrease the time period 5/2=2.5%

So

It's

(a) The final velocity if the trucks lock together after the collision is 7.66 m/s.

(b) The decrease in the kinetic energy after the collision is 11,165.1 J.

The final velocity of the two truck system after the collision is determined by applying the principle of conservation of linear momentum as shown below;

m₁u₁ + m₂u₂ = v(m₁ + m₂)

4285(9.35) + 5495(6.35) = v(4285 + 5495)

74,958 = 9,780v

v = 74,958/9780

v = 7.66 m/s

K.E = ¹/₂mv²

K.Ei = ¹/₂(4285)(9.35)² + ¹/₂(5495)(6.35)²

K.Ei = 298,088.78 J

K.Ef = ¹/₂(m₁ + m₂)v²

K.Ef = ¹/₂(4285  + 5495)(7.66)²

K.Ef = 286,923.68 J

ΔK.E = K.Ef - K.Ei

ΔK.E = 286,923.68 J - 298,088.78 J

ΔK.E = - 11,165.1 J

Learn more about linear momentum here: https://brainly.com/question/7538238

For A 100-cm long dipole is excited by a sinusoidally varying current with an amplitude i0=2 , the time average power radiated  is mathematically given as

P=0.1577w

Generally, the equation for the   is mathematically given as

[tex]\lambda =\frac{c}{f}[/tex]

Therefore

[tex]\lambda=\frac{3\times 10^{8}}{10^{6}}[/tex]

lambda=300m

In conclusion, for the power

[tex]P=40\pi^{2}(I_{0})^{2}(\frac{l}{\lambda})^{2}\\\\P=40* (3.14)^{2}\times6^{2} (\frac{1}{300})^{2}[/tex]

P=0.1577w

Read more about Power

https://brainly.com/question/10203153

The time-averaged power radiated by the dipole if the oscillating frequency is 150 MHz is 0.1577 w.

The distance between identical points (adjacent crests) in adjacent cycles of a waveform signal carried in space or down a wire is defined as the wavelength.

Given that the current is 2 amp, while the frequency is 150 MHz. Therefore, the wavelength can be written as,

[tex]\lambda = \dfrac cf = \dfrac{3 \times 10^8}{10^6} = 300\rm\ m[/tex]

Now, the power can be written as,

[tex]P=40 \pi^2 \times (I_o)^2 \times (\dfrac{l}{\lambda})^2\\\\P = 40 \times \pi ^2 \times 6^2 \times (\dfrac{1}{300})^2\\\\P = 0.1577\rm\ w[/tex]

Hence,  the time-average power radiated by the dipole if the oscillating frequency is 150 MHz is 0.1577 w.

Learn more about Wavelength:

https://brainly.com/question/13533093

#SPJ4

The type of circuit does this traffic situation model will be a parallel circuit because there is more than one path.

A parallel circuit has branches that split the current such that just a portion of it passes through each branch.

The voltage or potential difference between each branch of a parallel circuit is the same, but the currents might differ.

A parallel circuit is having more than one path in order to reach it on time he has to take a different path.

Hence the type of circuit does this traffic situation model will be a parallel circuit because there is more than one path.

To learn more about the parallel circuit refer to the link;

https://brainly.com/question/26589211

Answer:

C) a parallel circuit because there is more than one path

Explanation: edge

Answer:

Answer:

Option B

Explanation:

Option B talks about how the frequency of the wave increases the shorter it's wavelengths

Answer:

b

Explanation

B: As the frequency of a wave increases, the shorter its wavelength is.

Answer:

Power of the motor.

Explanation:

If it didn't have grip, it would still move. If it was barely aerodynamic (pretty sure nothing can be not aerodynamic at all) it would still move. If it weighed more that the sun (and you had a strong enough motor) it would still move but without a motor, it won't move. Therefore, the motor is the most effective.

Hi there!

We can solve for the time constant using the following:
[tex]\tau = RC[/tex]

τ = Time Constant (s)
R = Resistance (Ω)
C = Capacitance (F)

Simply plug in the values. Remember that:
4.7 μF = 4.7 * 10⁻ ⁶ F = 0.0000047 F

22kΩ = 22 * 10³ Ω= 22000Ω

Solve:
[tex]\tau = 0.0000047 * 22000 = \boxed{0.1034 s}[/tex]

(1) The image of an object placed further from the lens than the focal point will be upside down and smaller than the object.

(2) When light rays reflect, they bounce back.

(3)  Images formed by a concave lens will look magnified.

(4) When light rays enter a different medium, they bend.

The image of an object placed further from the lens than the focal point will be diminished and inverted.

Thus, the correct answer will be "upside down and smaller than the object".

The ability of light to bounce back when it strike a hard surface is known as refection.

A concave lens is diverging lens is usually virtual, erect and magnified.

The change in speed of light when it travels from medium to another medium is known as refraction. Refraction is also, the ability of light to bend around obstacles.

Learn more about reflection and refraction of light here: https://brainly.com/question/1191238

Answer:

It is upside down and larger than the object

They bounce back

Magnified

They bend

Explanation:

Answer:

Voltage and current sources are two different sorts of sources that may be found in an electrical network. A voltage source has an emf forcing function, whereas a current source has a current forcing function.

☆ ------ ☆ ------ ☆ ------ ☆ ------ ☆

''When the quantity demanded intersect with quantity supplied, it leads o the formation of equilibrium point.''

The equilibrium price and equilibrium quantity occur where the supply and demand curves cross with each other. The equilibrium occurs when the quantity demanded is equal to the quantity supplied.

So we can conclude that  when the quantity demanded intersect with quantity supplied, it leads o the formation of equilibrium point.

Learn more about equilibrium here: https://brainly.com/question/517289

Equilibrium is the condition when the supply of any goods meets the demands completely. The point at which the graph intersects is the equilibrium price.

Equilibrium is the condition when the supply of any goods meets the demands completely. Therefore, no extra goods are left.

Equilibrium is the condition when the supply and the demand line cross each other on a price and quantity graph as shown below. The point at which the graph intersects is the equilibrium price.

Learn more about Equilibrium Price:

https://brainly.com/question/12894603

#SPJ4

Answer:

ooops ignore this it wont let me leave this screen it does this weirdly s

Explanation:

Answer:

5,886 Joules or 5.886 KJ.

Explanation:

FORMULA IN FINDING WORK is

W = F x D

Where W is working;

F is force; and

D is distance

However, let us first discuss what work is.

When there is an object being moved by a force through a certain distance, the measure of energy transfer is what we call WORK.

One of the most common units used in work is JOULES (commonly used as a unit of energy). It is the work by which 1 Newton (1N = 1 kg.m/sec²) of force is used/expended through a distance of 1 meter (1m).

Refer to the problem.

It is said that the 30 kg set of bricks is to be raised to a height of 20 meters. As we see, there is no force given. But recall that force (F) is the product of the mass (m) of an object and its acceleration (a)

F = ma

However, in the formula, (g = 9.81 m/s²) or acceleration due to gravity is used in replacement of (a) because the object is moving upward.

So now we have  

F = mg

Thus, we have the new work formula as

W = (mg)(D)

Substituting the given values, we have

W = (mg)(D)

W = (30kg)(9.81 m/s²)(20m)

W = 5,886 kg.m²/sec² or W = 5,886 Joules

The work done in lifting the bricks is 5,886 Joules or 5.886 KJ.

~hope this helps~

Answer:

A, flat water

Explanation:

The final velocity of the other student after the elastic collision with Logan is 6.94 m/s.

The final velocity of the other student will be determined by applying the principle of conservation of linear momentum for elastic collision.

m₁u₁ + m₂u₂ = m₁v₁ + m₂v₂

Substitute the given parameters and solve for final velocity of the other stsudent.

74(7.6) + 81(0) = 74(0) + 81(v₂)

562.4 = 81v₂

v₂ = 562.4/81

v₂ = 6.94 m/s

Thus, the final velocity of the other student after the elastic collision with Logan is 6.94 m/s.

Learn more about conservation of linear momentum here: https://brainly.com/question/7538238

Explanation:

wavelength = l

speed of wave = v

frequency = f

v = lf → f = v/l = 2.42 × 10⁴ ÷ 1.1 = 2.2 × 10⁴ 1/s

T = 1/f = 1/ 2.2 × 10⁴ = 0.45 × 10 -⁴ s

The frequency of the sound wave produced from the drum is the speed divided by the wavelength. The frequency of the wave 22 kHz.

Frequency of a wave is the number of wave cycles per unit time. Frequency of a wave is directly proportional to the energy and inversely proportional to the wavelength.

The relation between speed of the wave c, wavelength and frequency of the wave can be written as follows:

c = νλ.

Given speed of the sound wave produced from the drum = 2.42 × 10⁴ m/s

wavelength λ = 110 cm = 1.1 m

The frequency of the sound wave  = speed/wavelength

ν = 2.42 × 10⁴ m/s / 1.1 m = 22000 Hz or 22 kHz.

Time period = 1/frequency

T = 1/ 22000 = 4.45× 10⁻⁵ seconds.

Therefore, the frequency of the wave is 22 kHz and time period of  4.45× 10⁻⁵ seconds.

Find more on frequency:

https://brainly.com/question/14926605

#SPJ2