Answer:
Fission is the release of atomic energy related to the splitting of nuclei.
M = M1 + M2 + E where E = m c^2 energy from conversion of mass
if the daughter nuclei are less in total mass than the parent nucleus then the difference is released as atomic energy where E = m c^2 and m is the mass that has been lost in the conversion.
What is current of 12 ohm? help me pleasee
Answer:
Current for 12 ohms = 2.5
Explanation:
Ohm's Law:
Voltage = IR
Current = V/R
Resistance = V/I
Therefore, current = 30V/12 Ohms
30/12 = 2.5
So current for 12 ohms = 2.5
I hope this helps :>
A coin has a mass of 7.0g. It is made of a metal alloy of density 5.6g/cm3. Calculate the volume of the coin.
[tex]\text{Density,}\\\\~~~~~~~~\rho = \dfrac mV\\\\\\\implies V = \dfrac m{\rho}\\\\\\\implies V = \dfrac{7 \times 10^{-3}~ \text{kg}}{\tfrac{5.6 \times 10^{-3}~ \text{kg}}{ 10^{-6} ~\text{m}^3} }\\\\ \\\implies V = \dfrac{7 \times 10^{-3}~ \text{kg}}{5.6 \times 10^{-3} \times 10^6~~ \text{kg}~ \text{m}^{-3}}\\\\\\ \implies V = 1.25 \times 10^{-6}~ \text m^3\\\\\\\implies V =0.00000125~ \text m^3\\\\\text{Hence the volume of the coin is 0.00000125}~ \text m^3[/tex]
A car with a mass of 1,500 kg accelerates at a rate of 3.0
/s2 forward. What is the force acting on the car? Show work.
Answer:
4500 N
Explanation:
F = ma
= 1500 kg * 3 m/s^2 = 4500 N
edited to correct units !
Why a surface that always have a perpendicular is an equipotential
Which property of the sound wave changes when the volume is increased on a radio?.
Answer:
amplitude
Explanation:
When we increase the volume of a sound, the amplitude of the wave is increased. The frequency of a wave is related to its pitch. If the pitch is high, then the frequency of the wave is high. This means that the wave will looked squashed on an oscilloscope trace.
Which characteristic is the same for every color of light in a vacuum?.
In a vacuum all colors of light travel with same speed and this is the reason a white ray travels through the vacuum without going through any dispersion..
What is speed?Speed of light is the distance per time light waves propagate through different materials. The value for the speed of light in a vacuum is now defined as exactly 299,792,458 metres per second.
Therefore, In a vacuum all colors of light travel with same speed and this is the reason a white ray travels through the vacuum without going through any dispersion
Learn more about speed of light here.
https://brainly.com/question/104425
Is the moons diameter about the same as the United States
Answer:
the Moon is smaller in diameter than the United States
however. The United States is 2,545 km / 1,582 mi from north to south, and thus, the Moon is smaller across than the United States is wide.
Answer:
The moon is smaller than the earth.
Explanation:
Moon's Diameter is 2,159.1 mi
Earth's Diameter is 7,917.5 mi
According to Newton's second law for rotational motion, an object's angular
acceleration equals the
(A) net torque multiplied by the moment of inertia.
(B) net moment of inertia divided by the net torque.
(C) net torque divided by the moment of inertia.
(D) net torque added to the moment of inertia.
Answer:
C: Net Torque divided by Moment of Inertia
Explanation:
Torque = Moment of Inertia x Angular Acceleration.
According to Newton's second law for rotational motion, an object's angular acceleration equals the net torque multiplied by the moment of inertia, not divided by it. The correct answer is (A)
Mathematically, it can be expressed as:
Angular acceleration (α) = (Net torque (τ) / Moment of inertia (I))
Where:
α = angular acceleration (measured in rad/s²)
τ = net torque (measured in Nm or kgm²/s²)
I = moment of inertia (measured in kgm²)
This equation shows that the angular acceleration of an object is equal to the net torque applied to it divided by its moment of inertia. So, the correct answer is (A) net torque multiplied by the moment of inertia.
To summarize, Newton's second law for rotational motion states that the angular acceleration of an object is directly proportional to the net torque applied to it and inversely proportional to its moment of inertia. The moment of inertia represents an object's resistance to changes in its rotational motion, while the net torque represents the total rotational force acting on the object.
To know more about Newton's second law:
https://brainly.com/question/34706880
#SPJ3
In order to compare the two thermal conductivities ,a scientist pours hot water into two beakers .
The two different insulators are wrapped around the beakers . The scientist records the intial temperatures of the hot water
State two further measurements he scientist should make
( if you don’t know please don’t reply )
Answer:
Time domain and frequency domain
Determine the slope of end a of the cantilevered beam. E = 200 gpa and i = 65. 0(106) mm4
For E = 200 gpa and i = 65. 0(106) mm4, the slope of end a of the cantilevered beam is mathematically given as
A=0.0048rads
What is the slope of end a of the cantilevered beam?Generally, the equation for the is mathematically given as
[tex]A=\frac{PL^2}{2EI}+\frac{ML}{EI}[/tex]
Therefore
A=\frac{10+10^2+3^2}{2*240*10^9*65*10^6}+\frac{10+10^3*3}{240*10^9*65*10^{-6}}
A=0.00288+0.00192=0.0048rads
A=0.0048rads
In conclusion, the slope is
A=0.0048rads
Read more about Graph
https://brainly.com/question/14375099
The value of slope of end a of the cantilevered beam when E = 200 gpa and i = 65. 0(106) mm4 is 0.0048 rads.
How to find the slope at the end of the cantilevered beam?The formula used to find the slope at the end of the cantilevered beam is,
[tex]A=\dfrac{PL^2}{2EI}+\dfrac{ML}{EI}[/tex]
Here, (M) is the momentum, (EI) is flexural rigidity, (P) is concentrated load and (L) is the length of the beam.
Concentrated load is 10 KN and uniform load is 3 kN/m. E = 200 gpa and i = 65. 0(106) mm4.
[tex]A=\dfrac{10+10^2+3^2}{2\times240\times10^9\times65\times10^6}+\dfrac{10+10^3\times3}{240\times10^9\times65\times10^{-6}}\\A=0.00288+0.00192A=0.0048 \rm\; rads[/tex]
Thus, the value of slope of end a of the cantilevered beam when E = 200 gpa and i = 65. 0(106) mm4 is 0.0048 rads.
Learn more about the cantilevered beam here;
https://brainly.com/question/19090244
#SPJ4
What happens to force if you decrease the charge on one of two charges?
Answer:
This repulsion would be reduced to one-quarter of its former value.
Explanation:
hope this helps. (MARK ME BRAINLIEST, please.)
3 Select the correct answer.
Which of the following statements is TRUE? А. Children in the US are generally given the opportunity to play sports in school starting at a young age.
B. The US is one of the few countries to integrate sports into their school systems.
C. Most high schools and colleges in the US have various sport teams.
D. All of the above
Answer:
A,B,C
Explanation:
because that is true
Which characteristic is common to the four outer planets in our solar system?.
Answer: They Are all gas giants.
Explanation:
4. The splashing of a liquid resembles an oscillation. The restoring force in this scenario will be due to which of the following?
Potential energy
Kinetic energy
Gravity
Mechanical energy
Please show all of your work.
Gravity
when liquid splashed and is at the top, the force bringing the liquid back down to the midpoint is gravity. This brings the liquid back to its equilibrium level.
Answer:
Gravity
Explanation:
The splashing of liquid resembles like an oscillation .
The force acting on liquid to pull it down is gravity and the force bouncing it back is caused by normal reaction
Hence gravity is the answer25. How long does it take a child on a swing to complete one swing if her center of gravity is 4.00 m below the pivot?
Please include all of your steps with the solution.
[tex]\\ \rm\rightarrowtail T=2\pi\sqrt{\dfrac{l}{g}}[/tex]
[tex]\\ \rm\rightarrowtail T=2\pi\sqrt{\dfrac{4}{9.8}}[/tex]
[tex]\\ \rm\rightarrowtail T=2\pi(0.63887)[/tex]
[tex]\\ \rm\rightarrowtail T=1.27774\pi [/tex]
[tex]\\ \rm\rightarrowtail T=4.012s[/tex]
Un motor eléctrico consume 10A de corriente de un circuito de 120v. Calcular la potencia y el trabajo que suministra al motor durante 5hrs de funcionamiento:
A) P=0.9 kw, T=6 kwh
B) P=0.85 kw, T=4 kwh
C) P=1.2 kw, T=3 kwh
D) P=1.2 kw, T=6 kwh
Answer:
D. P=1.2 kw, T=6kwh
Explanation:
P = A × V
P = 120×10
= 1200 watts or 1.2 kw
T = Watts × hr
1000
= 1200 × 5
1000
= 6 kwh
A bottle of soda always has a space between the cape and the top of the liquid. Explain
Answer:
All soft drinks contain water. When soft drink bottles are chilled in sub-zero temperatures, the water on account of its anomalous expansion expands. Thus, to provide space for expanding water, soft drink bottles are not completely filled as otherwise they will burst.
Explanation:
Answer:
Soft drink bottles are filled leaving some space between the lid/cap and the liquid level.
Explanation:
The reason is that the soft drinks are cooled below room temperature. Sometimes they are kept in the hot Sun and weather. They are subject to a big temperature variation. Also, there are gases like CO2 mixed in the drink. So the gases come out of the liquid and expand due to heat. That creates high pressure.
Water expands when it is cooled to 4 deg. C. But the bottle (glass) contracts when it is cooled. So if there is no air gap, then volume of water (cool drink) will become more than the inside volume of the bottle. Then the bottle will break due to pressure from water expansion around 8 deg. to 4 deg.C.
When a bottle is opened, due to pressure difference, and temperature difference, the gases come out of drink in the form of bubbles. So cold drink overflows out.
Also, the soft drink bottles are capped tightly. When an opener is used to open it using some force upwards, the pulling force also moves the soft drink bottle upwards. So just after the lid comes off, the top part of the drink comes out due to the pull. So some drink spills on people who open or, it falls outside.
In order to prevent these problems, some gap is left open between the surface of the soft drink and the top of the bottle.
While on an ice-fishing trip, you find yourself holding a 10 kg fish but stuck in the middle of
the lake. The ice is perfectly smooth and you cannot walk or shuffle your feet towards the
shore. But because you understand Newton's Laws, you are still able to make it back to shore. A
Briefly explain what did you did. Why did it worked? (Please include directional words such as
up/down, towards/away from shore, left/right, etc.)
The forward force you exert on the fish and your backward action will allow you to reach the shore.
Newton's third law of motionNewton's third law of motion states that for every action, there is an equal and opposite reaction.
Fa = -Fb
Let's assume the fish is held in the hook, this will give you the opportunity to throw the fish forward while still holding it.
When the the fish is thrown forward, you will move backwards with an equal force based on Newton's third law. Your backward momentum towards the shore will help to maintain equal linear momentum between you and the fish.
Thus, this forward force of the fish and your backward action will allow you to reach the shore.
Learn more Newton's third law of motion here: https://brainly.com/question/25998091
A 1000 kg rocket carrying 25 kg of fuel and oxygen rises at a velocity of 305 m/s. If all the mass of fuel and oxygen is burned to form gases of combustion, what is the downward velocity of these gases?
If all the mass of fuel and oxygen is burned to form gases of combustion, the downward velocity of these gases would be 12,505 m/s.
Conservation of linear momentumThe principle of conservation of linear momentum states that, the total momentum of an isolated system is constant.
The downward velocity of thes gases is calculated as follows;
v1(m1 + m2) = v2(m2)
305(1000 + 25) = v2(25)
312,625 = 25v2
v2 = 312,625/25
v2 = 12,505 m/s
Thus, If all the mass of fuel and oxygen is burned to form gases of combustion, the downward velocity of these gases would be 12,505 m/s.
Learn more about linear momentum here: https://brainly.com/question/7538238
9. Graph the following data on the graph, then use the graph to determine the half life of this
isotope.
The half life is the time taken for half the number of radioactive atoms originally present to remain. This is the time that corresponds to exactly half of the original number of radioactive isotopes remaining in the system.
What is half life?The half life is the time taken for half the number of radioactive atoms originally present to remain. We can plot the number of atoms against the time taken in a graph.
We can obtain the half life of the radioactive isotope from the graph by noting the time that corresponds to exactly half of the original number of radioactive isotopes remaining in the system.
Learn more about radioactive isotopes: https://brainly.com/question/772406
A compound wall consists of parallel layers of two different materials, 10 cm of brick and 2 cm of wood. If the difference of temperature across the brick wall is 20° C calculate the temperature difference between the wooden wall and heat current per square metre of the wall. [Thermal conductivity of brick and wood are respectively 0.5Wm-K- and 0.125Wm-'K']
The temperature difference between the wooden wall is 16⁰C, and the heat current per square metre of the wall is 7,325 W/m².
Temperature difference between the wooden wallThe temperature difference between the wooden wall is calculated as follows;
Let the brick wall = wall ALet the wooden wall = wall BLet the area of the walls = A[tex]\frac{dQ_A}{dt } = \frac{dQ_B}{dt} \\\\\frac{K_A \Delta T_A \times A}{L_A} = \frac{K_B \Delta T _B \times A}{L_B}\\\\\frac{K_A \Delta T_A }{L_A} = \frac{K_B \Delta T _B}{L_B}\\\\\frac{0.5 \times 20}{0.1} = \frac{0.125 \times \Delta T _B }{0.02} \\\\100 = 6.25\Delta T _B\\\\\Delta T _B = \frac{100}{6.25} \\\\\Delta T _B = 16 \ ^oC[/tex]
Heat flowing in the wallsQ = KL(ΔT)
Q = 0.5 x 0.1 x (20 + 273)
Q = 14.65 W
Heat current per square meter of the WallsQA = W/A
QA = (14.65)/A
Let the area of the wall = 10 cm x 2 cm = 0.1 m x 0.02 m = 0.002 m².QA = 14.65/0.002
QA = 7,325 W/m²
Learn more about thermal conductivity here: https://brainly.com/question/11213835
Hello~
Which of the following produces least friction?
(a) Sliding friction
(b) Rolling friction
(c) Composite friction
(d) Static friction
Answer:
Rolling friction
Explanation:
When a object rolls down the all sides of object comes contact to under surface for very low timeFor which the friction decreases .Option B is correct
How does the maximum value of the current depend on the frequency of the ac voltage source?.
The maximum value of the current depend on the frequency of the ac voltage source because it increases as the frequency increases.
What is peak current of AC source?
The peak current of an ac source is the amplitude current flowing in the ac circuit.
The magnitude of the peak current is calculated as follows;
I₀ = i/(sin ωt)
I₀ = i/(sin 2πft)
where;
I₀ is the peak currenti is the ac currentω is angular speedf is the frequencyt is timemaximum value ac currenti = I₀ x sin 2πft
From the equation above, as the frequency of the of the ac voltage source increases, the value of the ac current (i) increases.
Thus, the maximum value of the current depend on the frequency of the ac voltage source because it increases as the frequency increases.
Learn more about ac current here: https://brainly.com/question/10715323
#SPJ1
Use F = 1/T as your basis:
8. If your heart rate is 150 beats per minute during strenuous exercise, what is the time per beat in units of seconds?
The answer is 0.400 s/beats but please show your work.
Heart rate is given by
150beats/minConvert to per second
150/60=5/2=2.5beats/sNow
Frequency:-
[tex]\\ \rm\rightarrowtail \nu=\dfrac{1}{T}[/tex]
[tex]\\ \rm\rightarrowtail \nu=\dfrac{1}{2.5}[/tex]
[tex]\\ \rm\rightarrowtail \nu=0.4Hz[/tex]
A car of mass 1200kg moving 90km/hr is brought to rest over a distance of 20m. calculate breaking force.
Answer:
-18,750N
Explanation:
90x1000
-------------
3600
u=25m/s
v=0m/s
v^2=u^2+2as
v=0
=625+(2×a×20)
625+40a
-625=40a
a= -15.625 m/s^2
F=ma
=(1200)(-15.625)
= -18,750N
When a 10-V battery is connected to a resistor, 2 A of current flow in the resistor. What is the resistor's value
Hi there!
We can use Ohm's law to solve:
[tex]V = IR[/tex]
V = Potential Difference (V)
I = Current (A)
R = Resistance (Ω)
We can rearrange the equation to solve for resistance:
[tex]R = \frac{V}{I}[/tex]
Plug in the given values to solve.
[tex]R = \frac{10}{2} = \boxed{5 \Omega}[/tex]
A 50,0 g silver spoon at 20.0°C is placed in a cup of coffee at
90.0°C. How much heat does the spoon absorb from the coffee to
reach a temperature of 89.0°C?
The heat capacity of the silver spoon at the given temperature difference is 817.65 J.
Heat capacity of the silver spoon
The heat capacity of theb silver spoon is the quantity of heat absorbed by the silver spoon. The heat capacity of the silver spoon at the given temperature difference is calculated as follows;
Q = mcΔθ
where;
m is mass of the spoonc is specific heat capacity of silver = 0.237 J/g⁰CΔθ is change in temperatureQ = 50 x 0.237 x (89 - 20)
Q = 817.65 J
Thus, the heat capacity of the silver spoon at the given temperature difference is 817.65 J.
Learn more about heat capacity here: https://brainly.com/question/16559442
The energy for _____ transport comes from the gradient itself
Answer:
the anwser is atp
Explanation:
To move substances against a concentration or an electrochemical gradient the cell must use energy. This energy is harvested from ATP that is generated through cellular metabolism. Active transport mechanisms, collectively called pumps or carrier proteins work against electrochemical gradients.
The energy for passive transport comes from the gradient itself, in which transfer of a solute from high electrochemical potential to low take place.
What is passive transport?The passive transport is the shifting or transfer of a solute from a place where the electrochemical potential is high to a place where the electrochemical potential is low.
Energy require for passive transport-
Compound moves free from high electrochemical potential to low in memberne.Due to free movement, there in no energy required in passive transport.Thus, the energy for passive transport comes from the gradient itself, in which transfer of a solute from high electrochemical potential to low take place.
Learn more about the passive transport here
https://brainly.com/question/25802833
#SPJ4
Electromagnets project student guide
y’all i need helppppo
Answer:
I don't know
Explanation:
you need then search here
Which is the destructive interference formula for diffraction grating problems? dsin = dcos = dcos = n dsin = n.
The destructive interference formula for diffraction grating problems is [tex]d sin \theta = (n+\frac{1}{2})\lambda[/tex].
What is the definition of destructive interference?Destructive interference happens when the maxima of two waves are 180° out of phase a positive displacement of one wave is canceled exactly by a negative displacement of the other wave.
The formula for brighter patches resulting from constructive interference and darker patches resulting from destructive interference in a diffraction grating is:
[tex]\rm d sin \theta = n \lambda[/tex]
The grating spacing is denoted by d, the angle of light is denoted by a the fringe order is denoted by n, and the wavelength is denoted by [tex]\rm \lambda[/tex].
The destructive interference formula is now based on the fact that destructive interference occurs between the fringes.
Hence the destructive interference formula for diffraction grating problems is [tex]d sin \theta = (n+\frac{1}{2})\lambda[/tex].
To learn more about destructive interference refer to the link;
https://brainly.com/question/16098226
Answer:
A. dsin =
Explanation: