What is speed of sound in air?​

Answers

Answer 1

Answer:

speed of sound, speed at which sound waves propagate through different materials. In particular, for dry air at a temperature of 0 °C (32 °F), the modern value for the speed of sound is 331.29 metres (1,086.9 feet) per second


Related Questions

what is photosynthesis​

Answers

Required Answer :-

: [tex] \implies[/tex] The Photosynthesis is the process of capturing light energy and transforming it into chemical energy. Green plants and several other organisms use light energy and convert carbon dioxide and water into glucose. In this process, oxygen is produced as a by-product

We also who how it's process occur

In plants and blue-green algae, the photosynthesis process takes place in chloroplasts. The chloroplast is present in all green parts of a plant – the leaves, green stems, sepals, and even in the flowers, in the form of green colour plastids. The chloroplast is found only in plant cells and is essential for photosynthesis reaction.

Photosynthesis Equation

Carbon dioxide and water are the two major factors involved in the photosynthesis reaction. It’s an endothermic reaction, and the products resulting from it are oxygen and glucose. The formula is:

6CO2 + 6H2O = C6H12O6 + 6O2

However, some bacteria don’t produce oxygen as a by-product of photosynthesis. They are called anoxygenic photosynthetic bacteria, and those who do it are called oxygenic photosynthetic bacteria.

Importance of Photosynthesis

The photosynthesis process is very important for the survival of living beings, and to continue the food chain. It also produces oxygen, which is required for breathing.

Photosynthetic Pigments

Four types of photosynthetic pigments are present in the leaves of the plants. They are:

Chlorophyll a

chlorophyll b

xanthophylls

Carotenoids

The Factors Affecting Photosynthesis

Various factors influence/affect the photosynthesis process. These are:

Light Intensity: More the light, the more will be the rate of photosynthesis. Similarly, low light will lead to a low rate of photosynthesis.

The Concentration of CO2: A higher CO2 concentration rate in a plant also accelerates the photosynthesis process. The required amount of CO2 is 300-400 PPM.

Temperature: If the temperature is between the range of 25 to 35 degrees Celsius, the photosynthesis takes place effectively.

Water: An essential amount of water is required for stomatal opening, and it’s a key factor in the process of photosynthesis.

Pollution: The increasing rate of polluting particles in the atmosphere block the pores of somatic cells, and the intake of carbon dioxide becomes difficult.

▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬

Hope it's helps !!

All circuits include


a battery, wires, and a switch.


an energy source, a resistor, and a battery.


a battery, a light bulb, and a switch.


an energy source, a load, and wires.

Answers

Answer:

a battery, wires, and a switch.

Explanation:

All circuits include?

Which is the most famous book of the philosopher Alexis karpouzos? I think it is the ''Cosmology, philosophy and physics''.

Answers

Answer: Yes, the " Cosmology, philosophy and physics" is the most famous book of the philosopher, Alexis karpouzos. But and the other books are important. For example, the " The self-criticism of science", the "Universal conscilusness" and the "Non-duality".

Explanation:

The_____ scale is called an absolute temperature scale, and its zero point is called absolute zero.

Kelvin

Fahrenheit

Celsius

Answers

The Celcius Scale is called an absolute Temperature scale,and it's zero point called absolute zero

_______________

If the penny is thrown horizontally at 25 m/s from the 170 meter building, how long will it take for the penny to hit the ground?

Answers

9514 1404 393

Answer:

  about 5.89 seconds

Explanation:

The penny will hit the ground at the same time it would if it were simply dropped. The equation for the vertical motion is ...

  h(t) = -4.9t^2 +170 . . . . . where 170 is the initial height in meters

h(t) = 0 when ...

  4.9t^2 = 170

  t = √(170/4.9) ≈ 5.89

The penny will hit the ground in about 5.89 seconds.

A 1.1 kg ball drops vertically onto a floor, hitting with a speed of 23 m/s. It rebounds with an initial speed of 5.0 m/s. (a) What impulse acts on the ball during the contact

Answers

Hi there!

We know that:

I = Δp = m(vf - vi)

Plug in the given values. Remember to take into account direction ⇒ let the rebound velocity be positive and initial be negative.

I = 1.1(5 - (-23)) = 30.8 Ns

PLEASE HELP!
A 9kg particle is initially at rest at x=0. It is subject to a single force Fx (N) which varies with x (m) as shown in the
diagram
F
2
1
0
ББ by
x
- 1
1
-2
The kinetic energy of the particle when it is at x = 3 m is:

Answers

Hi there!

With a Force/Displacement curve, we must take the integral (area underneath the curve) to calculate the work done.

We know that:

W = ΔKE

Calculate the work by finding the area underneath the force curve from

x = 0 to 3 m:

We can use a trapezoid:

A = 1/2(3 + 2)(3) = 7.5 J

This is the amount of work done, and since the object starts from rest:

7.5J = KEf - KEi (0 J)

7.5J = KEf = 7.5 J

A car with an initial position of 10.0 m
and an initial velocity of 16.0 m/s accelerates at an average rate of 0.50 m/s2 for 4.0 s. What is the car’s position after 4.0 s?

Answers

Answer:

78

Explanation:

x=xi+vi(t)+1/2a(t)^2

x=10+16(4)+1/2(0.50)(4)^2

x=74+4

x=78 m

The car on this ramp starts from rest. When released, it
accelerates at a constant rate. It has an initial position of 12 cm
from the top of the ramp, and has an average velocity of 1.20 m/s
for a total of 1.80 s. Which is the correct final position of the car?

Answers

Answer:

Explanation:

s 0.12 + 1.20(1.80) = 2.28 m from the top.

A stomp rocket takes 3.1 seconds to reach its maximum height.

- What is its initial velocity? (Do not use units. If the answer is negative, please put a
negative sign in front of the answer.)

- What is its maximum height? (Do not use units. If the answer is negative, please put a
negative sign in front of the answer.)

Answers

Answer:

Explanation:

Ignoring air resistance the time to rise will equal the time to fall and initial velocity will be the same magnitude as final velocity just before impact.

v = at

v = 9.8(3.1)

v = 30.38

v = 30 m/s

max height can be found knowing the velocity is zero at the top of its flight.

v² = u² + 2as

s = (v² - u²) / 2a

s = (0.00² - 30.38²) / (2(-9.8))

s =  47.089

s = 47 m

A stomp rocket takes 3.1 seconds to reach its maximum height then the initial velocity is given as v = 30 m/s and maximum height is 47.089 m.

What is Velocity?

Velocity is defined as rate of change of position with respect to time.

SI unit of velocity is m/sec. Velocity is a vector quantity.

Given that in the question time taken by rocket to reach maximum height is 3.1 sec. Ignoring air resistance the time to rise will equal the time to fall and initial velocity will be the same magnitude as final velocity just before impact.

v = at

v = 9.8(3.1)

v = 30.38

v = 30 m/s

Max height can be found knowing the velocity is zero at the top of its flight.

v² = u² + 2as

s = (v² - u²) / 2a

s = (0.00² - 30.38²) / (2(-9.8))

s =  47.089

s = 47 m

So, the initial velocity is given as v = 30 m/s and maximum height is 47.089 m.

To learn more about Velocity refer to the link:

brainly.com/question/18084516

 #SPJ5

Swim swim swim swim swim swim swim swim swim swim swim swim.

Answers

Swim swim swim faster ‍♂️

What is a list of all the states of matter?

Answers

Answer:

3

Explanation:

state of matter are solid

liquid and

gases

Answer:

3

Explanation:

state of a matter are solid liquid and gas

An object moving at a constant velocity of 5.4 m/s travels for 12 s. How far will it move during that time?

Free-fall Acceleration is -10 m/s^2

Answers

Answer:

we know that

s=vt

given

v=5.4 m/s

t=12 s

s=5.4 m/s*12 s=64.8m

Explanation:

Hope this helps:)

A 0,9 -kg object attached to the end of a string swings in a vertical circle (radius = 75 cm). At the top of the circle the speed of the object is 6,5 m/s. What is the magnitude of the tension in the string at this position?

Answers

0.6 cm is the answer add it up and find the m/s hope this helps

A 2.0 kg particle moving along the z-axis experiences the
force shown in (Figure 1). The particle's velocity is
3.0 m/s at x = 0 m.
A) At what point on the x axis does the particle have a turning point?

Answers

At point x = 0, the particle accelerates. Since there will be change of velocity at that point. The the force of the particle will change from negative sign to positive sign according to the given figure, we can therefore conclude that the particle will have a turning point at point x = 0.

Given that a 2.0 kg particle moving along the z-axis experiences the  force shown in a given figure.

Force is the product of mass and acceleration. While acceleration is the rate of change of velocity. Both the force and acceleration are vector quantities. They have both magnitude and direction.

If the particle's velocity is  3.0 m/s at x = 0 m, that mean that the particle experience change of velocity at point x = 0. Since the the force of the particle will change from negative sign to positive sign according to the given figure, we can therefore conclude that the particle will have a turning point at point x = 0.

Learn more here: https://brainly.com/question/20366032

An object is dropped from a vertical height of 1.89 m above the balcony level. What is the object’s speed when it is 2.20 m below the balcony level if 10.0% energy is lost due to the air resistance? Does it matter when to apply 10% loss before V calculations or after? [8.49m/s] [yes it does, 0.9Energy result in √0.9Velocity]

Answers

a.

The object's speed at 2.20 m below balcony level is 8.74 m/s

Let the balcony level be 0 m and the height above the balcony level be positive and height below the balcony level negative.

Using the principle of conservation of energy, the total energy at a vertical height of 1.89 m above the balcony level equals the total mechanical energy when the object is 2.20 m below the balcony level and

So, E = E'

U + K + f = U' + K' + f'

where U = initial potential energy at 1.89 m = mgh, K = initial kinetic energy at 1.89 m = 0 J(since it is released from rest), f = energy loss at 1.89 m = 0 J, U' = final potential energy at 2.20 m below balcony level = mgh', K = final kinetic energy at 2.20 m = 1/2mv², f' = energy loss at 1.89 m = 10%U = 0.10mgh(since 10% of the initial energy is lost).

So,

U + K + f = U' + K' + f'

mgh + 0 + 0 = mgh' + 1/2mv² + 0.10mgh

mgh = mgh' + 1/2mv² + 0.10mgh

Dividing through by m, we have

gh = gh' + 1/2v² + 0.10gh

So, gh -  0.10gh = gh' + 1/2v²

0.90gh = gh' + 1/2v²

1/2v² = 0.90gh - gh'

1/2v² = g(0.90h - h')

v² = 2g(0.90h - h')

Taking square-root of both sides, we have

v = √[2g(0.90h - h')]

where v = velocity of object at 2.20 m below balcony level, h = height above the balcony level = 1.89 m, h' = height below the balcony level = -2.20 m and  g = acceleration due to gravity = 9.8 m/s²

Substituting the values of the variables into the equation, we have

v = √[2g(0.90h - h')]

v = √[2 × 9.8 m/s²{0.90 × 1.89 m - (-2.20 m)}]

v = √[2 × 9.8 m/s²(1.701 m + 2.20 m)]

v = √[2 × 9.8 m/s²(3.901 m)]

v = √[76.4596 m²/s²]

v = 8.74 m/s

So, the object's speed at 2.20 m below balcony level is 8.74 m/s

b.

Yes it does matter when we apply 10% loss before V calculations

We need to apply the 10 % loss before V calculations because this would give us a proper value for V since the energy is lost before V is obtained.

So, yes it does matter when we apply 10% loss before V calculations

Learn more about speed of a falling object here:

https://brainly.com/question/18732868

please paraphrase this paragraph

As a conclusion we first learned what is Discrete Fourier Transform and
why is it very important in signal processing science as it helps us to convert the discrete signal from time domain into frequency domain and the inverse DFT does the opposite converting the signal from frequency domain back into time domain. We have also learned the difference between DFT and the FFT algorithm where the FFT is an efficient
algorithm created to simplify the DFT process as it is faster and more accurate. We also learned how to perform and implement this algorithm using Matlab,

Answers

Answer:

The importance of signal processing science as has been made clear. Since we now know that it help to convert discrete signal from time domain to frequency domain. Moreover, we are now aware of the difference in DF5 and FFT algorithms as well as the implementation in Matlab.

A tennis player strikes the tennis ball with an initial velocity of 44.7 m/s horizontally. The ball is initially 1.28 m above the ground and 12.9 m from the 0.914 m tall net. Does the tennis ball make it over the net?

Answers

Hi there!

We can begin by finding the total time taken for the ball to reach the net using the equation:

dₓ = vₓt

12.9 = 44.7t

12.9/44.7 = t = 0.289 s

Now, we can use the following equation to solve for displacement in the Y direction:

d = y₀ + vit + 1/2at²

There is no initial vertical velocity, so:

d = y₀ + 1/2at²

Plug in known values:

d = 1.28 + 1/2(-9.8)(0.289²)

d = 0.87m

Thus, since 0.87 m < 0.914 m, the tennis ball does NOT make it over the net.

What is the direction of the torque produced on the crankset by the 2-kg mass attached to the pedal bar

Answers

A Torque is a twisting force, or turning moment, it is a vector quantity with both magnitude and direction e.g Turning the handle of a cork-screw clockwise and then counterclockwise will advance the screw first inward and then outward By convention, counterclockwise torques are positive and clockwise torques are negative.

The direction is perpendicular to both the radius from the axis and to the force. It is conventional to choose it in the right hand rule direction along the axis of rotation.

Counterclockwise is the positive rotation direction and clockwise is the negative direction.

Learn more at:

https://brainly.com/question/18253139

Why metals have thermoconductivity higher than ceramic?

Answers

Answer:

Thermal Conductivity Easily Transmits Heat Among Fine Ceramics

Suppose you lift a 17 kg k g box by a height of 1.0 m m . How much work do you do in lifting the box

Answers

Answer:

17 J

Explanation:

work done= force X distance moved

Someone with a force of 900 N does not float in a freshwater pool. To prevent them from sinking, 20 N must be applied in an upward fashion. What is their volume and average density?

Answers

Explanation:

The buoyant force [tex]F_B[/tex] is defined as

[tex]F_B = \rho_wgV[/tex]

where [tex]\rho_w[/tex] is the density of the displaced fluid (freshwater), g is the acceleration due to gravity and V is the volume of the submerged object. In the case of freshwater, its density is [tex]997\:\text{kg/m}^3.[/tex] Since the buoyant force is 20 N, we can solve for the volume of the displaced fluid:

[tex]F_B = \rho_wgV \Rightarrow V = \dfrac{F_B}{\rho_wg}[/tex]

Plugging in the values, we get

[tex]V = \dfrac{20\:\text{N}}{(997\:\text{kg/m}^3)(9.8\:\text{m/s}^2)}[/tex]

[tex]\:\:\:\:\:= 2.05×10^{-3}\:\text{m}^3[/tex]

Recall that the weight of an object in terms of its density and volume is given by

[tex]W = \rho gV[/tex]

Using the value for the volume above, we can solve for the density of the object as follows:

[tex]\rho = \dfrac{W}{gV} = \dfrac{900\:\text{N}}{(9.8\:\text{m/s}^2)(2.05×10^{-3}\:\text{m}^3)}[/tex]

[tex]\:\:\:\:\:= 44,798\:\text{kg/m}^3[/tex]

a man can jump 9meteres on the moon.how high can he jump on the earth.​

Answers

Answer:

You can jump 1.5 feet on Earth.

Explanation:

Because the moons gravity is weaker that earth so it would be easier to jump further on the moon.

can someone please help no.1,2,3 ​

Answers

Answer:

12345678910i don't know

When does your body conduct current more readily?

when it is hot
when it is dry
when it is cold
when it is wet

Answers

Wetness increases conductivity

Answer:

When you are wet or you are sweating current passes easily.

Explanation:

wetness increases conductivity. therefore 'when it is wet'.

14 The radius of gyration of a body about an axis &ta
distance 6 cm from its centre of mass is 10 cm.
Then, its radius of gyration about a parallel axis
through its centre of mass will be
(a) 80 cm (b) 8 cm (c) 0.8 cm (d) 0.08 cm

Answers

Correct option is B 8 cm.

Let radius of gyration for the axis not passing through center of mass be r and that for the axis passing through the center of mass be k and the distance between the two parallel axes be a.

Parallel axes theorem gives:

[tex] {mr}^{2} = m( {k}^{2} + {a}^{2} ) \\ ⇒ {r}^{2} = {k}^{2} + a {}^{2} [/tex][tex]⇒k = \sqrt{ {10}^{2} - {6}^{2} } = 8cm.[/tex]

Thus, option B is the correct answer.

A solar collector for a hot water system absorbs solar radiation at the rate of 660 W/m^2
. Its collecting area is 3.8m^2 . Cold water at 15degrees enters the collector. What volume of
water per minute at an output temperature of 60 degrees can this collector deliver?

Answers

This question involves the concepts of the law of conservation of energy and specific heat capacity.

This collector can deliver "7.96 x 10⁻⁴ m³/min" of water at an output temperature of 60°C.

According to the law of conservation of energy:

Solar Energy = Energy Required to raise the temperature of the water

Solar Power = Energy Required to raise the temperature of the water

[tex]IA=\frac{mC\Delta T}{t}\\\\\frac{m}{t}=\frac{IA}{C\Delta}[/tex]

where,

[tex]\frac{m}{t}[/tex] = mass flow rate = ?

I = solar radiation = 660 W/m²

A = Area = 3.8 m²

ΔT = change in temperature = 60°C - 15°C = 45°C

C = specific heat capacity = 4200 J/kg.°C

Therefore,

[tex]\frac{m}{t}=\frac{(660\ W/m^2)(3.8\ m^2)}{(4200\ J/kg.^oC)(45^oC)}\\\\\frac{m}{t}=(0.0133\ kg/s)(\frac{60\ s}{1\ min})\\\\\frac{m}{t}=0.796\ kg/min[/tex]

Now, the volume flow rate will be:

[tex]\frac{V}{t}=\frac{(\frac{m}{t})}{(density\ of\ water)}=\frac{(0.796\ kg/min)}{(1000\ kg/m^3)}\\\\\frac{V}{t}=7.96\ x\ 10^{-4}\ m^3/min[/tex]

Learn more about the law of conservation of energy here:

brainly.com/question/20971995?referrer=searchResults

The attached picture explains the law of conservation of energy.

Look at the simple machine shown below to determine the mechanical advantage

Answers

Answer:

A

Explanation:

An empty cylindrical barrel is open at one end and rolls without slipping straight down a hill. The barrel has a mass of 15.0 kg, a radius of 0.400 m, and a length of 0.800 m. The mass of the end of the barrel equals a fourth of the mass of its side, and the thickness of the barrel is negligible. The acceleration due to gravity is =9.80 m/s2.
What is the translational speed f of the barrel at the bottom of the hill if released from rest at a height of 33.0 m above the bottom?

Answers

Hi there!

We can use work and energy to solve this problem.

We know that:

Ei = Ef

Ei = Potential energy = mgh

Ef = Rotational kinetic + Translational kinetic = 1/2Iω² + 1/2mv²

The barrel is comprised of a hollow cylinder and disk-shaped bottom, so:

I (hollow cylinder) = mr²

I (disk) = 1/2mr²

Calculate the moment of inertias of each.

Since the mass on the base is one-fourth of its side:

x = mass of side

x + x/4 = 15

4x + x = 60

5x = 60

x = 12 kg

end mass = 3 kg

Solve for each moment of inertia:

Side: (12)(0.4²) = 1.92 Kgm²

Bottom: 1/2(3)(0.4²) = 0.24 Kgm²

Side + bottom = 2.16 Kgm²

We can now solve:

mgh = 1/2mv² + 1/2(2.16)v²/r²

(15)(9.8)(33) = 1/2(15)v² + 1/2(13.5)v²

4851 = 14.25v²

v = 18.45 m/s

What happens when the object is placed at F? Explain
your answer.

Answers

Answer:

Sample Response: No image will be formed because the rays will not converge to or diverge from a common point.

Explanation:

Other Questions
Angles on a line add up to 180. So what is x? 2. A number 'a' is equal to the square of the number 'b' plus three times thenumber'co Write a formula for 'a' Graph: f(x) = 4 to the power of 4 who is your favorite teacher Do you believe that Crimes Against humanity could happen in modern day? A family needs to build fencing around their rectangular home and square swimming pool, depicted below Plz help me solve for x and y A complex system used in IT is a redundant array of independent disks (RAID), which is commonly used in _____ for file servers. how to experiment titration Parallel lines m and n are cut by the transversal line t prove What is the periodic table? What does control in Russia? A crankshaft of an engine increases its spin from 1,000 rpm to 1,500 rpm in 0.5 s. What is its angular acceleration? (1 rev=2 rad)600 rad/s2100 rad/s2500 rad/s260 rad/s2 Add the following fractions answer in lowest terms.1) 9/10+4/5+5/6=2) 14/15+2/9+1/5=please give me Right answers please. how do you word an informative essay in science class about newton's laws of motion seventh grade Jan skips 5 m north, 4 m east, 6 m north, 16 m east, and 4 m north. How far is Jan from whereshe started?help asap!! Identify the six parts of the DNA molecule. Food A 150 calories in 3/4 of a serving. Food B 250 calories in 2/3 of a serving. Find each unit rate. Which food has fewer calories per serving? Which conclusion is best supported by Jacksons article?A.State of the Union addresses will continue to change in the future.A.State of the Union addresses will continue to change in the future.B.Future presidents will look to previous State of the Union addresses for inspiration.B.Future presidents will look to previous State of the Union addresses for inspiration.C.State of the Union addresses will be received in the future with increasing criticism.C.State of the Union addresses will be received in the future with increasing criticism.D.Future presidents will emphasize style over substance in their State of the Union addresses.D.Future presidents will emphasize style over substance in their State of the Union addresses. A father (75 kg) was standing watching TV, minding his own business when one of his kids (20 kg) approached him at 2m/s heading at 0 degrees and jumped onto his back. Another kid (15 kg) approached him at 3m/s heading at 45 degrees to the first kid and also jumped on him at exactly the same time. Immediately after impact, in what direction did the group go (measured in degrees with respect to the first kid)