What is the change in energy experienced by an electron in a hydrogen atom that undergoes an n = 2 to n = 1 transition?

The balls cross paths at above the halfway point of the building.

Let us consider the ball dropped down as ball A and the ball thrown up as ball B. The initial speed of ball B is same as that of final velocity of ball A meaning that both balls have same average velocity. So they both cover same distance ( meaning the ball B reaches the top of the roof ) at same time. But the instantaneous velocities differs which means that they cross at halfway point.  

The ball A starts slowly and the speed keeps increasing as it goes farther. The ball B starts faster and the speed keeps decreasing as it goes farther. So when the ball B reaches the halfway mark, the ball A still hasn't reached the halfway mark. This means that the ball B kept rising and at some point above the halfway point, the ball B crosses the ball A.

Therefore, the balls cross paths at above the halfway point of the building ( B ).

To know more about instantaneous velocity

https://brainly.com/question/13190516

#SPJ1

Answer: the pull of the magnetic field surrounding the earth

Explanation:

8.01m/s

acceleration = 3.53 m/s2

Final velocity = 15.1 m/s

time = 2.01 s

initial velocity = ?

by applying kinematics equation

v = u + at

u = v-at

u = 15.1- 3.53 × 2.01

 =  15.1 - 7.09

u = 8.01m/s

To know more about  standard light intensity   visit : https://brainly.com/question/7590442

#SPJ4

1) What are the remote and immediate effects of the technology on the health of people?

2) Is there any avenue to handle potential health risks that could be associated with the new technology?

New technology  is always laden with a lot of inherent risk factors. The fact that the development if new technology often has to do  with the exploitation of the resources that help to sustain the environment leaves much to be desired.

When developing new technologies the following should be taken into consideration;

1) What are the remote and immediate effects of the technology on the health of people?

2) Is there any avenue to handle potential health risks that could be associated with the new technology?

Learn more about new technology:https://brainly.com/question/24009073

#SPJ1

Energy must be transferred for motion, which is displacement, between the item and its system or environment. The energy's direction might either be toward or away from the object.

In your case, the energy must originate from the item itself in order for the force and subsequent movement to be in the opposite direction. For instance, rocket propulsion and jet engines. Propellers operate on a totally different mechanism that may be stated simply as "big pull, tiny push," therefore you cannot think of them in this way. Because they combine gasoline sparking to provide more thrust in turbojet engines (hence turbo).

Learn more about energy here-

https://brainly.com/question/1932868

#SPJ9

Linear mass density and tension are the two factors on which the speed of the transverse waves on a string depends.

The square root of the linear mass density determines the speed of a wave on a string, with larger speeds occurring when the linear mass density is lower.

The linear density divided by the square root of the tension determines the wave's speed on a taut string.

The qualities of the medium affect a wave's speed. For instance, the sound of a guitar is created by the vibration of the strings. The wavelength and wave speed on the strings influence the frequency of the sound that is produced. A guitar's strings can be composed of materials that are similar in composition but varied in thickness.

To learn more about the speed of a transverse wave please visit-
https://brainly.com/question/13863548
#SPJ9

The g’s experienced by the driver will be 30.45 g.

The above is a case of uniformly accelerated motion.

So we have to use one of the following equations to solve it,

v = u + at

v^2 - u^2 = 2as

s = ut + 1/2t^2

As we are given the final velocity, initial velocity and the time, therefore the first equation is appropriate.

v = u+ at

Putting v = 0 m/s

u = 20 m/s

t = 0.067 s

0 = 20 + at

The acceleration comes out to be 298.50 m/s^2.

As g = 9.8 m/s^2, dividing the value of acceleration by 9.8 will give the value of g experienced by the driver.

A = 298.50/9.8 = 30.45g m/s^2.

Hence, The g’s experienced by the driver will be 30.45 g.

To know more about "acceleration due to gravity", refer to the following link:

https://brainly.com/question/12792214?referrer=searchResults

#SPJ4

Answer:

C

Explanation:

This is right because answer c states that the boat is moving faster and faster. Therefore its accelerating.

The faces given here adhe, bcgf, cdhg and abfe will contribute for zero flux because the area vector is seen as normal to the electric field for these faces.

When a charge is present in any form on any particle, a point in space has an electric field that is connected to it.

The value of this E is often known as the electric field strength, electric field intensity, or just the electric field that expresses the strength and direction of the electric field.

Volts per meter (V/m) is the electrical field's SI unit. Newton's per coulomb unit is the same as V/m.

These units are derivations from Newton, which stands for force, and Coulomb, which stands for charge.

Thereon we have,

Flux through face efgh,ϕ = ∫ E. dA

= a(j). l^2 (-j) = -al^2

As the electric field provided at the face efgy is E =aj and the area vector is determined as l^2(-j),

Thus, flux through the face abcd,

ϕ2 = (a+bl)j . l^2(j) = al^2 + bl^2 for y = l

Thus, net flux that flows through the cube = ϕ1 + ϕ2 = bl^3

From Gauss law, we know that ϕ = Qenclosed/ ε0

Qenclosed = ε0 ϕE =  ε0bl^3

Thus, after we have substitued the values, we have l = 1m and b=3m

Qenclosed = 3 ε0

The required figure in order for reference to the provided names of faces is attached below.

To know more about electric fields, visit:

https://brainly.com/question/15800304

#SPJ4

Ann runs 800 meters without sandbags in 3 minutes. if she completes 800 meters with them in 2 more minutes. Ann's speed when jogging with sandbags is 160 m/min 

Speed is defined as the rate at which an object's motion changes in relation to its distance. Since speed is a scalar quantity, the direction of the motion has no bearing on the speed.

It differs from velocity due to this. The rate of change of motion is measured in velocity in a certain direction. Velocity is a vector question, therefore. It's important to move in this way.

Distance to time ratios are used to calculate speed.

Therefore, in this scenario, Speed would travel without a sandbag.

800/3 = 266.66 m/min

Speed while travelling without the sandbag,

800/5 = 160 m/min.

Therefore, the speed while travelling with the sandbag is 160 m/min.

To learn more about Speed:

https://brainly.com/question/28224010

#SPJ4

The ball  in order to rise to a height of 37.8 ft was launched with a speed of: 49.3158 ft

The formula for the vertical launch upward and the procedure we will use is:

y max = v₀²/(2*g)

Where:

Information about the problem:

Applying the maximum height formula and clearing the initial velocity we get:

y max = v₀²/(2*g)

v₀ = √(y max * (2*g))

v₀ = √( 37.8 ft * (2 * 32.17 ft/s²))

v₀ = √( 37.8 ft * 64.34 ft/s²)

v₀ = √2432.052 ft²/s²

v₀ = 49.3158 ft

In physics vertical launch upwards is the motion described by an object that has been launched vertically upwards in which the height and the effect of the earth's gravitational force on the launched object are taken into account.

Learn more about vertical launch at: brainly.com/question/13962796

#SPJ4

Answer:

Natural selection is a process by which organisms with characteristics suited to the environment will survive and reproduce

The speed of sound in miles per hour is 767.33 miles/h when the speed of sound in air at room temperature is approximately 343 m/s.

The distance a sound wave travels through an elastic material in one unit of time is measured as its speed of sound. At 20 °C, the speed of sound in air is approximately 343 m/s, or 2.91 or 4.69 seconds for a mile.

The properties of the medium itself determine the speed of a sound wave because sound needs a medium to travel through (such as density, stiffness, and temperature). For every degree, the velocity of sound drops by roughly 6 meters per second. Compression waves, which at a small scale rely on molecules transmitting energy one to another, are used to convey sound through the air.

We are given that 1 mi = 1609 m.

Also we know that 1 hour = 3600 s

Therefore,

343m/s*3000s/h*(1/1609mi/h)=767.433mi/h

Thus, the speed of sound in miles per hour is 767.33 miles/h.

To know more about speed of sound, visit here:

https://brainly.com/question/15137350

#SPJ4

The magnitude of the electric field at the location of the test charge is  15020 N C-1 or V m-1

We have to use F = E q

Given F = 0.751 N, q = 5*10-5 C

So required E = F /q = 0.751/5*10-5

The electric field at the location E = 15020 N C-1 or V m-1

Find out more information about the electric field.

https://brainly.com/question/8971780?referrer=searchResults

#SPJ4

The x and y components of the net force, F is 4.33N + 17.5N. The magnitude is 18.02 N and the direction is 76.10 N.

The initial velocity is Vi = 3 m/s

(a) F₁x = Fcosθ

Or,  F₁x = 5Ncos30

Or,  F₁x = 4.33 N

F₁y = Fsinθ

F₁y = 5Nsin30

Or, F₁y = 2.5 N

F₂x = 0

F₂y = 15Nsin30

F₂y = 2.5 N

Therefore, the net force is, F = 4.33N + 17.5N

(b) The magnitude of the net force is

F =√Fx² + Fy²

F = √(4.33)² + (1.75)²

F = 18.02 N

So, the magnitude is 18.02 N.

The direction is

θ = Tan⁻¹[Fy/Fx]

Or, θ = Tan⁻¹ [17.5/4.33]

θ = 76.10 N

The direction of the net force is 76.10 N.

To learn more about force, magnitude, and direction, visit: https://brainly.com/question/13170747

#SPJ4

The power it absorbs = 774.4W and the resistance of the heater = 62.5Ω

If we consider the heater as a resistor, we have

P=[tex]v^{2}[/tex]/R

So when connected to the first heater,

P1 = [tex]\frac{v_{1} ^{2}}{R}[/tex]

when connected to the 2nd heater,

P2 = [tex]\frac{v_{2} ^{2}}{R}[/tex]

So solving for R

R= [tex]\frac{v_{1} ^{2}}{P_{1} }[/tex] = [tex](250V)^{2}[/tex]/1000W = 62.5[tex]\ohm\\[/tex]Ω

R=62.5[tex]\ohm\\[/tex]Ω

The power absorbed can be given as

P2 =[tex]\frac{v_{2} ^{2}}{R}[/tex] = [tex]\frac{v_{2} ^{2}}{\frac{v_{1} ^{2}}{P_{1} } }[/tex] = P1[tex]\frac{v_{2} ^{2}}{v_{1} ^{2}}[/tex] = P1 [tex](\frac{v_{2} }{v_{1} } )^2[/tex]

=1000 x [tex]0.88^2[/tex]

⇒ P2 = 774.34W

Power is the rate at which work is done in electronics. The barrier put up to the movement of electrons is called resistance. Power and resistance have a proportionate relationship.

Resistance is a component that aids in measuring resistance to current flow in an electrical circuit, whereas power is the pace at which work is done. In one of them, power is inversely correlated with resistance, and in the other, power is directly correlated with it.

To know more about resistance, visit:

https://brainly.com/question/11431009

#SPJ4

De Broglie wavelength of the subatomic particle is 0. 0020 * (10 )^ -3 nm.

Any of the multiple self-contained units of matter or energy that are the building blocks of all matter are considered subatomic particles, also known as elementary particles. They include the heavier constituents of the small but extremely dense atom's nucleus, the positively charged protons and the electrically neutral neutrons, as well as the electrons, the negatively charged, nearly massless particles that nonetheless make up the majority of the atom's size. The only known subatomic particles, however, are not these fundamental atomic building blocks. The electron is just one member of a class of fundamental particles that also includes the muon and the neutrino. Protons and neutrons, for example, are composed of quarks.

Let the De Broglie wavelength be Λ.

Λ = h/p

  = (6.626 * 10^-34) / (351 * 9.11 * 10^-31)

Λ =  0.0020 * 10^-3 nm

To know more about subatomic particle, visit:

https://brainly.com/question/13303285

#SPJ4

The graph should look like decreasing speed into zero into a permanent negative acceleration brought on by gravity.

What is negative acceleration ?

When an item experiences negative acceleration, its velocity changes in a negative direction, which can suggest that it is moving either slower or faster. In physics, a change in an object's velocity is referred to as "acceleration." Since this change in velocity is a vector quantity, it denotes both magnitude and direction. Positive velocity is likewise a vector, and experiencing negative acceleration means that something is slowing down. In contrast, an item moving at a negative velocity and acceleration is actually going faster.

To learn more about vector quantity click on the link below:

https://brainly.com/question/2912049

#SPJ4

Question:

A fox locates its prey, usually a mouse, under the snow by slight sounds the rodents make. The fox then leaps straight into the air and burrows its nose into the snow to catch its next meal. What should the graph look like?

Copernicus heliocentric theory proved that the Earth and the other planets revolve around the Sun.

Other statements from the Copernicus' heliocentric theory were that the Sun was the center of the solar system or of the universe. The Earth and the other planets revolve around the Sun. The Earth takes about an year to revolve around the sun while it spins on its own axis which causes the profession of the equinoxes.

Advantages of the Copernicus heliocentric theory include that it explained the variations in brightness of the planets like Mars and also the phases of the inner planets like Mercury and Venus. It allowed us to measure the distances of various planets from the Sun. It also specified the time period taken by a planet to revolve around the Sun.

To know more about Copernicus' heliocentric theory, refer to the following link:

https://brainly.com/question/5427235

#SPJ4

Both are perpendicular to each other so resultant ground reaction force exerted by the floor on the volleyball player's shoes

=2088N approx

In physics, movement is the phenomenon wherein an item adjustments its function with appreciate to time. Motion is mathematically defined in phrases of displacement, distance, velocity, acceleration, speed and body of reference to an observer and measuring the extrade in function of the frame relative to that body with extrade in time. The department of physics describing the movement of items with out connection with its reason is called kinematics, at the same time as the department reading forces and their impact on movement is called dynamics. If an item isn't converting relative to a given body of reference, the item is stated to be at rest, motionless, immobile, stationary, or to have a steady or time-invariant function close to its surroundings. Modern physics holds that, as there's no absolute body of reference, Newton's idea of absolute movement can't be determined. As such, the whole thing within side the universe may be taken into consideration to be in movement.

Friction force=600 N

The normal contact force exerted by the floor on her shoes = 2000 N

Botha are perpendicular to each other so resultant ground reaction force exerted by the floor on the volleyball player's shoes=((600)^2+(2000)^2)^0.5=2088.06130178N

=2088N approx

To know more about motion, visit;

https://brainly.com/question/22810476

#SPJ4

Answer:

Explanation:

A basketball player jumps vertically off the ground 5.6m/s how long were they in the air

Given that

To find

So, according the question

We have,

preliminary velocity u = five.6 m/s

and acceleration due to gravity g = - 9.81 m/s² ( - signal for upward movement )

( ∴ basketball participant jumps vertically and he travelled inside the air on the action of gravity so we recall his acceleration as g. )

Now, from first equation of motion.

     v = u + at

velocity at highest point will be zero so

     v = 0 ,   u = 5.6 m/s and a = g = - 9.81 m/s²

Now, putting the all values on first equation of motion.

       0 = 5.6 - 9.81 × t

   -5.6 = -9.81 × t

        [tex]t = \frac{5.6}{9.81}[/tex]

       t = 0.58 s.

To learn more about application of motion  please click on that link

https://brainly.com/question/11049671

#SPJ4

The frequency f1 of the string is 319.37 Hz and the number n of the highest harmonic is 50.

[tex]v = \sqrt{ \frac{F}{ \frac{m}{l} } } [/tex]

[tex]v = \sqrt{ \frac{Fl}{m} } [/tex]

[tex] = \sqrt{ \frac{765 \times 0.500}{3.75 \times 10 ^{ - 3} } } [/tex]

[tex] = \sqrt{ \frac{765 \times 0.500}{3.75 \times 10 ^{ - 3} } } [/tex]= 319.37 m/s

The frequency f1 of the string's fundamental mode of vibration is,

[tex]f = \frac{v}{2l} \\ [/tex]

[tex] = \sqrt{ \frac{319.37}{2 \times 0.500} } [/tex]

= 319.37 Hz

The frequency f1 of the string's fundamental mode of vibration is 319.37 Hz.

The number n of the highest harmonic that could be heard by a person who is capable of hearing frequencies up to 16 kHz is,

[tex]f _{n} = nf _{1}[/tex]

[tex]n = \frac{16}{319.37} [/tex]

[tex]n = 50[/tex]

The number n of the highest harmonic that could be heard by a person who is capable of hearing frequencies up to 16 kHz is 50.

Therefore, the frequency f1 of the string is 319.37 Hz and number n of the highest harmonic is 50.

To know more about frequency, refer to the below link:

https://brainly.com/question/14316711

#SPJ4

When an item procedures the rate of light. it's miles described as theory of relativity

In the theory of relativity, it  implies that as a moving object approaches the speed of light, which is about 186,000 miles per second, the length of the object appears to shrink to zero, relative to the position of the observer.

Lorentz pressure is understood to be independent of body due to the fact because of the combine impact of electric and magnetic fields which is understood to be now no longer body structured as visible in Lorentz Transformation. This is the reason why we do not define electromagnetic fields, electric and magnetic fields together.

Note that Lorentz pressure is stated to be body impartial because dome of its components are acknowledged to return back up as a end result of shifting of body of reference, and this makes them to cancel every other out and therefore they make the resultant lorentz pressure same.

To know more about Lorentz force , visit :

https://brainly.com/question/28211140

#SPJ4

Answer:

they are transparent to see the content of goods inside but at the same time what cause it to be transparent is because of the fact that they are created with low-density polyethylene and polypropylene, which are transparent polymers.

Answer: B

Explanation:

R=A+B
A goes south

B goes east

R=

A+B=

South+East=Southeast ==> B

Answer:

B

Explanation:

Vectors are drawn as lines with arrowheads on them.

Vectors can be added together by drawing the arrows nose to tail.

To add vectors A and B, place the tail of vector B at the nose of vector A (see attached diagram).

The single vector that goes from the start to the end of the combined vectors is called the resultant vector.

As  R = A + B,  then R is the resultant vector of A and B.

R starts at the tail of vector A and goes to the nose of vector B.

The final velocity of the cannon camera is 22m/s

This question informs us that David will depart on a voyage at his maximum speed. Consequently, the speed is 80 km/h. So we have to convert. At a 2 m/s rate, listen. We must multiply our number of 80 by the quantity of meters in a club in order to convert it to units. His final velocity therefore equals 22.2

a= v/ t = 56m/sec square dec acceleration = 80km/h converting into final velocity m /s sec its 22.2m/s

To learn more about velocity:

brainly.com/question/18084516

#SPJ4

Subsolar point is moving from the equator towards the tropic of cancer the season will be spring.

The sun seems to be directly above a planet at this moment, or when the sun's rays are exactly perpendicular to the planet's surface. It can also refer to the area on an astronomical object that is closest to the sun, even if the sun might not be visible.

The subsolar point is the latitude where the sun's rays exactly intersect the Earth's surface perpendicularly. It is the area where the sun is above at noon.

to learn more about subsolar point go to -

https://brainly.com/question/13020132

#SPJ4

This problem checks that we understand the relationship between the electric field and the force felt by a test charge. 3000 N/C is the magnitude of electric field at that point.

An electric field (sometimes E-field) is physical field that surrounds the electrically charged particles and exerts force on all the other charged particles in the field, either attracting or repelling them. It also refers to the physical field for a system of the charged particles. Electric fields originate from electric charges and the time-varying electric currents. Electric fields and magnetic fields are both manifestations of electromagnetic field, one of the four fundamental interactions (also called forces) of the nature.

Electric fields are important in the many areas of physics, and are exploited in electrical technology. In atomic physics and chemistry, for the instance, the electric field is the attractive force holding the atomic nucleus and electrons together in atoms. It is also force responsible for chemical bonding between atoms that result in molecules.

The electric field is defined as a vector field that associates to each point in the space the (electrostatic or Coulomb) force per unit of charge exerted on an infinitesimal positive test charge at rest at that point. The derived SI unit for electric field is the volt per meter (V/m), which is equal to the newton per coulomb (N/C).

Examples of the electric fields include the field produced in the dielectric of a parallel-plate capacitor (which creates an electrostatic field) and the electromagnetic wave produced by a radio broadcast monopole antenna (which creates a time-varying field).

The SI unit of electric field is volts per meter (V/m). This unit is equivalent to the Newton's per coulomb. These are derived units where Newton is a unit of force and Coulomb is the unit of the charge.

For the above question:

F= 6μN= 6*[tex]10^{-6}[/tex] and q= 2NC= 2*[tex]10^{-9}[/tex]c, E=?

we know that whenever a charge particle is in electric field experience a force of F= qE

Then |E|= |F|/q= 6*[tex]10^{-6}[/tex]/2*[tex]10^{-9}[/tex] N/C

             =3*[tex]10^{3}[/tex] N/C= 3000 N/C

To know more about electric field visit: https://brainly.com/question/8971780

#SPJ4

the circuit for a light fixture controlled by four switches, where flipping one of the switches turns the light on when it is off and turns it off when it is on is given as: ([tex]\overline {x}[/tex]yzw) + (x[tex]\overline {y}[/tex]zw) + (xy[tex]\overline {z}[/tex]w) + (xyz[tex]\overline {w}[/tex])

Here, overlined x , y , z and w represents the switch of the circuit(see the image)

So if one of the four switches is flipped  the light turn on when it is off and turns it off when it is on.

A circuit in electronics is a fully enclosed circle through which electricity travels. A load, conductors, and a current source make up a basic circuit. Any fixed path that electricity, data, or a signal can go through can be referred to as a circuit in a broad sense.

Electrons in an electronic circuit leave the power source, move along conductors, pass through a load to do work, and then return to the power source. The circular course that the electrons take through it gives it the name "circuit." Ohm's Law provides a description of the connection between electrical flow and load. In a circuit, electrons move from the negative to the positive side of the power supply.

Learn more about circuit

https://brainly.com/question/2969220

#SPJ4