Engineering High School

What is the hazard present in this image?.
Select the best option.
Poor housekeeping
No guardrails/covers
Lifting strap is damaged
Unstable stacked materials
<< Previous
Submit Question
Jump to Question: 3
CornerSafe “ i don’t know what this means”

Answers

Answer 1
Answer

Based on the given options, the hazard present in the image could be "Unstable stacked materials."

Related Questions

Your load voltage and arc voltage measurement should be

Answers

Answer:

taken at the same time to ensure accurate results.

Explanation:

taken at the same time for get results

Do you think the plan for the skyscraper in California is appropriate based on its location? Why or why not? Your answer should include at least three complete sentences.

Answers

It is critical to note that building a high rise in California, especially within the San Francisco Inlet Zone, comes with its possess interesting set of challenges.

What is the skyscraper  about?

The range is inclined to seismic tremors and other common fiascos, making it vital to take after strict security rules amid development. In expansion, there are concerns almost the affect such a huge building would have on the nearby environment, as well as issues related to activity blockage and lodging accessibility.

Eventually, whether or not the arrange for the high rise is fitting will depend on a number of components, counting its plan, area, and affect on the encompassing community.

Learn more about skyscraper  from

https://brainly.com/question/717259

#SPJ1

A 35-ft long solid steel rod is subjected to a load of 8,000 lb. This load causes the rod to stretch 0.266 in. The modulus of elasticity of the steel is 30,000,000 psi. Determine the diameter of the rod (precision of 0.00)

Answers

Answer:

The diameter of the rod can be determined using the following formula:

Explanation:

d = sqrt(4L / (pi * E * delta))

where:

d = diameter of the rod

L = length of the rod = 35 ft

E = modulus of elasticity of the steel = 30,000,000 psi

delta = elongation of the rod = 0.266 in

First, we need to convert the length of the rod and elongation to inches to maintain consistency with the units of E:

L = 35 ft * 12 in/ft = 420 in

delta = 0.266 in

Substituting the given values into the formula:

d = sqrt(4 * 420 / (pi * 30,000,000 * 0.266))

d = 0.615 in (rounded to 0.01)

Therefore, the diameter of the steel rod is 0.62 inches (rounded to 0.01).

Two 40-ft long wires made of different materials are supported from the ceiling of a testing laboratory. Wire 1 is made of material H and has a diameter of 3/8 in. Wire 2 is made of material K and has a diameter of 3/16 in. When a load of 225 lb is applied to its lower end, wire 1 stretches 0.10 in. When the same 225 lb load is applied to the lower end of wire 2, wire 2 stretches 0.25 in. Compare materials H and K. Which material has the greater modulus of elasticity? Which is the stiffer material?

Answers

Answer:

Yes! I can help with.

Explanation:

To compare materials H and K, we need to determine the modulus of elasticity for each material. The modulus of elasticity is a measure of a material's stiffness, specifically the amount of stress required to produce a given amount of strain.

We can use the formula:

stress = force / area

strain = change in length / original length

modulus of elasticity = stress / strain

Let's start by calculating the stress on each wire:

For wire 1:

stress = force / area = (225 lb) / ((pi/4) * (3/8 in)^2) = 7,655 psi

For wire 2:

stress = force / area = (225 lb) / ((pi/4) * (3/16 in)^2) = 30,620 psi

Next, we can calculate the strain on each wire:

For wire 1:

strain = change in length / original length = 0.10 in / 480 in = 0.000208

For wire 2:

strain = change in length / original length = 0.25 in / 480 in = 0.000521

Finally, we can use the formula to calculate the modulus of elasticity for each material:

For material H:

modulus of elasticity = stress / strain = 7,655 psi / 0.000208 = 36,824,038 psi

For material K:

modulus of elasticity = stress / strain = 30,620 psi / 0.000521 = 58,745,334 psi

Therefore, material K has the greater modulus of elasticity and is the stiffer material.

PLEASE HELP QUICK!!
What balance do you believe should be maintained in deciding how land and its resources should be used? In what circumstances, and in what ways, do you believe environmental resources should always be preserved? In what circumstances, and how, do you believe they should be used? What guidelines would you suggest for striking the right balance?

Answers

The balance that I believe should be maintained in deciding how land and its resources should be used is adopting sustainable practices.

How to explain the information

The concept of sustainability calls for the practice of utilizing resources in a fashion that not just fulfills the requirements of presently, yet also preserves enough to support generations hereafter. This method of operation helps to guarantee that resources are being tapped rationally and applied responsibily all while preserving nature's equilibrium and environmental variety.

Particular ecosystems such as those found in wetlands, coral reefs, and woodlands hold significance in keeping up the overall health of the planet, and should take precedence in conservation efforts.

Learn more about land on

https://brainly.com/question/21537812

#SPJ1

The vanelli family is building a house and wants to save anywhere the can which of the following choices would be the most electric system for them to operate

Answers

Note that if the  vanelli family is building a house and wants to save anywhere they can the choice that would be most expensive electric system for them to operate is a Heat Pump. (Option a)

What is a heat pump?

A heat pump is a device tha tuses electricity to generate heat so that during winter and very cold period, the house is kept warm.

This is notably one of th most expensive devices to maintain in a home.

Hence it will be very expensive for the Vanelli familyto build a house that has many heat pumps. They can opt for solar powered heat pumpts instead.

Learn more about heat pumps:
https://brainly.com/question/13198025
#SPJ1

The Vanelli family is building a house and wants to save money anywhere they can. Which of the

following choices would be the most expensive electric system for them to operate?

A. Heat pump

B. Baseboard

C. Radiant ceiling

D. Program clock

The acronym ELF stands for which three important actions you must take to prepare for any standardized test?

a.Explore the test, learn the content, follow test day rules.

b.Explore the content, learn the test, follow test day rules.

c.Examine your courses, learn the facts, follow test day rules.

d.Examine the library, live the content, follow test day rules.

Answers

I believe the answer is A, explore the test, learn the content, follow test day rules. Hope this helps! Please give me brainliest :)

A blocked drain on a pressure-reducing valve will
A) Result in no reduction of pressure
B) Prevent flow from the outlet of the valve
C) Block the inlet of the valve
D) Drop system pressure to zero

Answers

Answer:

Yes! I can Answer that!

Explanation:

C) Block the inlet of the valve.

A blocked drain on a pressure-reducing valve can prevent the valve from functioning correctly by blocking the drain line that is used to relieve excess pressure from the valve. As a result, the inlet of the valve can become blocked, causing the valve to malfunction and preventing it from reducing pressure. It is important to keep the drain line clear to ensure that the pressure-reducing valve works properly.

Using a doorbell circuit as an example, explain why wiring a doorbell button switch in the normally-open state is preferred.

Answers

Answer:

Here is your Answer Bellow!

Explanation:

Wiring a doorbell button switch in the normally-open (NO) state is preferred because it is safer and more reliable than wiring it in the normally-closed (NC) state.

In a doorbell circuit, when the doorbell button is pressed, it completes the circuit and allows current to flow to the doorbell, causing it to ring. In the NC configuration, the button switch is always closed, and current flows through the circuit even when the button is not pressed. This can cause several problems, such as short circuits, overheating, and premature wear on the doorbell and other components in the circuit.

On the other hand, in the NO configuration, the button switch is open when it is not pressed, and no current flows through the circuit. When the button is pressed, it closes the circuit and allows current to flow, causing the doorbell to ring. This configuration is safer because it minimizes the risk of short circuits, overheating, and premature wear on the components in the circuit.

In addition to being safer, the NO configuration is also more reliable because it is less prone to false triggers. In the NC configuration, the button switch can be triggered by vibration, accidental contact, or other factors, causing the doorbell to ring unnecessarily. In the NO configuration, however, the button switch must be deliberately pressed to trigger the doorbell, making it less likely to ring accidentally.

Overall, wiring a doorbell button switch in the normally-open state is the preferred configuration for safety, reliability, and durability.

Wiring a doorbell button switch in the normally-open (NO) state is preferred because it is safer and more reliable than wiring it in the normally-closed (NC) state.

In a doorbell circuit, when the doorbell button is pressed, it completes the circuit and allows current to flow to the doorbell, causing it to ring. In the NC configuration, the button switch is always closed, and current flows through the circuit even when the button is not pressed. This can cause several problems, such as short circuits, overheating, and premature wear on the doorbell and other components in the circuit.

On the other hand, in the NO configuration, the button switch is open when it is not pressed, and no current flows through the circuit.

Learn more about configuration on:

https://brainly.com/question/13410673

#SPJ1

3. How does gear work?


4. Are 3.73 or 4.10 gears better?

Answers

3. Gears are wheels with teeth that slot together. When one gear is turned the other one turns as well. If the gears are of different sizes, they can be used to increase the power of a turning force. The smaller wheel turns more quickly but with less force, while the bigger one turns more slowly with more force.

4. 4.10 gears are going to accelerate faster and decelerate faster on the lift. However, the trade-off is greater fuel consumption per mile driven and higher engine speed per given road speed. In basic terms, the 4.10 gears will feel quicker and 3.73 will feel faster.

Other Questions
a group of nine women and six men must select a four-person committee. how many committees are possible if it must consist of the following? any mixture of men and women When Antony is finished with his speech, the citizens of RomeA celebrate Caesar's deathB do not believe him and still support the conpsiratorsC name Antony the kingD turn on the conspirators and chase them from Rome Won $180 in a competition recently and I decided to share the whole of it between my three grandchildren in the ratio of their ages. When gave them their money today, 8-year-old James, 6-year-old Sarah and 4-year-old Lucy all thanked me. However, Sarah did point out that her birthday is only three weeks away and Lucy's birthday is next week. How much more would Sarah have received if had shared out the money immediately after her birthday instead of today? A nurse is administering lidocaine to a client with a myocardial infarction. Which assessment finding requires the nurse's immediate action?Respiratory rate of 22Pulse rate of 48 beats per minuteCentral venous pressure reading of 11Blood pressure of 144/92 What is nonnbullous impetigo assocaited with? hyperbolic discounting has led to the theory that people that abuse drugs: group of answer choices are more impulsive and discount the future more heavily focus on the past causing them to discount the future more heavily value larger-delayed rewards are reinforced through operant processes associated with drug use A fence post that is 5 feet tall casts a 2-foot shadow at the same time that a tree that is 27 feet tall casts a shadow in the same direction. Determine the length of the tree's shadow. 8.5 feet 10.8 feet 12 feet 21.4 feet the concentration of co2 of 420 ppbv yields an equilibrium ph of 5.63 in rainwater (see slide 13 from chapter 11). what is the expected ph of rainwater that is in equilibrium with so2 from a polluted environment with a concentration of 100 ppbv so2? at 25oc, kh so2 Find the multiplying integers -2x24= Drag the answer in order from most potential energy (at the top) to least potential energy (at the bottom).Source:Position D on the roller coasterA person standing on the groundPosition A on the roller coasterBA person in an airplane in the skyATarget Consider the following two investment decisions: buy a certified deposit (CD) which will pay you a 10% annual interest rate, and buy some stocks which will either give you a 30% annual return (with 0.7 probability) or incur a 10% loss for you (with 0.3 probability). In terms of expected utility, you should of course buy stocks. However, suppose you are conservative and cannot tolerate any loss of your principal. In this case, you have no choice but to deposit your money into a CD. Now consider this problem for a 3 years time span. You start with 1 unit of money. Each year you can choose only one way to invest your entire fund (meaning you are not allowed to diversify, like 50% CD, 50% stocks). You definitely don't want to lose any money at the end of the 3 years, but you are okay with a \temporary" loss during the time (for example, it is okay for you to lose some money in the first year as long as you can make it up later). Formalize this problem as a Markov decision process and compute its optimal policy. Hints A state needs to contain information about how many money you have in this state. In other words, a state needs to encode the history: which actions you have done so far and what their outcomes are if the actions are non-deterministic. Find the interior, the boundary, the set of all accumulation points, and the closure of each set. Classify it as open, closed, or neither open nor closed. Is it a compact subset of R? a. A = U[-2+1,2 - 1] nEN intA= bdA= A' = clA= A is closed / open / neither closed nor open A is compact / not compact b. B = {(-1)" +h:n eN} intB= bdB = B = cl B= B is closed / open / neither closed nor open B is compact / not compact c. C = {r Q+ :r2 George Corporation paid $240,000 for 45% of Washington Corporation's outstanding voting common stock on July 1, 2021. Washington's stockholders' equity on January 1, 2021 was $260,000 consisting of $160,000 capital stock and $100,000 retained earnings. During 2021, Washington reported net income of $70,000 and on October 1, 2021, Washington declared dividends of $32,000 Washington's assets and liabilities were stated at fair values on July 1, 2021 except for land that was undervalued by $40,000 and equipment with a five-year remaining useful life that was undervalued by $30,000. 3. Prepare an Amortization schedule for the cost/book value differences similar to the one in the power point presentation. See the slide "Amortization and Investment Income" 4. Prepare all of the journal entries that will be recorded on the books of George Company to account for this investment. (Initial purchase and activity for 2018) 5. Provide the calculation of the investment in Washington Account at December 31, 2021. In the case of minors, who can give consent for emergency medical care? 3. in cell g8, enter a formula with the nper function that uses the rate per quarter (cell g10), the quarterly payment amount (cell g11), the amount of the business loan (cell g4), and the future value of the loan (cell g5) to calculate the total number of payments required to repay the $490,000 loan with quarterly payments of $15,000. 42) Substrate-level phosphorylation occurs during the __________ stage(s) of glycolysis.A) energy-investmentB) lysisC) energy-conservationD) both energy-investment and energy-conservationE) energy-investment, lysis, and energy-conservation list of cloud deployment modes a. public cloud b. infrastructure cloud c. private cloud d. hybrid deployment Suppose that a spherical star spinning at an initial angular velocity w suddenly collapses to half of its original radius without any loss of mass. Assume the star has uniform density before and after the collapse. What will the angular velocity of the star be after the collapse?(A) w/4(B) w/2(C) w(D) 2w(E) 4w Independent agencies typically possess both quasi-legislative and quasi-judicial functions.A. TrueB. False Collyer Products Inc. has a Valve Division that manufactures and sells a standard valve as follows: Capacity in units Selling price to outside customers on the intermediate market Variable costs per unit Fixed costs per unit (based on capacity) 10,000 $ 15 $ $ 5 un oui The company has a Pump Division that could use this valve in the manufacture of one of its pumps. The Pump Division is currently purchasing 10,000 valves per year from an overseas supplier at a cost of $14 per valve. 2. Assume that the Valve Division is selling all that it can produce to outside customers on the intermediate market. What is the acceptable range, if any, for the transfer price between the two divisions? Transfer price $ 0 VA VI AL