What is the mass in grams of 15 moles of Fe2O3.
Explanation pls and thank you

The volume of a 1.50 moles of an ideal gas at 26.0°C and a pressure of 419 kPa is 8.91L.

The volume of an ideal gas can be calculated using the following ideal gas law equation;

PV = nRT

Where;

According to this question, 1.50 moles of an ideal gas at 26.0°C and a pressure of 419 kPa. The volume can be calculated as follows:

4.135 × V = 1.5 × 0.0821 × 299

4.135V = 36.82185

V = 8.91L

Learn more about volume at: https://brainly.com/question/15110960

#SPJ1

Answer:

d . made in a factory

Explanation:

Answer:

To show that the data are in accord with the law of multiple proportions, we need to determine the ratios of the masses of to in each compound and see if they are in small whole number ratios.

For the first compound:

Mass of : 23.3 g

Mass of : 3.00 g

Ratio of masses: 23.3 g / 3.00 g = 7.77

For the second compound:

Mass of : 7.00 g

Mass of : 4.50 g

Ratio of masses: 7.00 g / 4.50 g = 1.56

These ratios are not in small whole number ratios, which indicates that the formula for the first compound cannot be determined by simple inspection. However, the fact that the ratios are different is in accord with the law of multiple proportions, which states that when two elements form more than one compound, the masses of one element that combine with a fixed mass of the other element are in small whole number ratios.

Let's assume that the formula for the second compound is . This means that the ratio of to in the compound is 2:1. From the data provided, we know that there are 4.50 g of in the compound, which means there must be twice as much in the compound. Therefore, there are 9.00 g of in the compound.

To determine the formula of the first compound, we can subtract the mass of from the total mass of the compound:

Mass of : 23.3 g

Mass of : 3.00 g

Total mass: 26.3 g

Mass of : 26.3 g - 3.00 g = 23.3 g

So the ratio of to in the first compound is:

Mass of : 23.3 g

Mass of : 3.00 g

Ratio of masses: 23.3 g / 3.00 g = 7.77

We can divide this ratio by the ratio of to in the second compound to get the ratio of the two compounds:

Ratio of first compound: 7.77

Ratio of second compound: 2.00

The ratio of the two compounds is not a small whole number ratio, which suggests that the formula for the first compound is more complex than a simple binary compound. Therefore, we cannot determine the formula of the first compound from the data provided.

Answer:

the formula of the first compound is A2.08B0.78, which we can simplify to A2B.

Explanation:

To determine if these data are in accord with the law of multiple proportions, we need to compare the ratios of the masses of one element to the fixed mass of the other element in each compound:

For the first compound:

mass ratio of A:B = 23.3 g / 3.00 g = 7.77

For the second compound:

mass ratio of A:B = 7.00 g / 4.50 g = 1.56

If the ratios of the masses of one element to the fixed mass of the other element are simple whole number ratios, then the data are in accordance with the law of multiple proportions. We can see that the ratios calculated above are not simple whole numbers, so the law of multiple proportions does not appear to be satisfied.

To determine the formula of the first compound, we can assume that the formula is AxBy, where x and y are the subscripts that we need to determine. We can set up a system of equations based on the mass ratios:

23.3 g of A combines with 3.00 g of B:

(23.3 g A) / (x mol A) = (3.00 g B) / (y mol B)

7.77 mol A / mol B = (23.3 g A) / (3.00 g B)

7.77 (y/x) = 23.3 / 3.00

y/x = 3/7.77

7.77 g of A combines with 1.00 g of B:

(7.77 g A) / (x mol A) = (1.00 g B) / (y mol B)

1.56 mol A / mol B = (7.77 g A) / (1.00 g B)

1.56 (y/x) = 7.77 / 1.00

y/x = 5/2

Now we have two equations for y/x that we can solve simultaneously:

y/x = 3/7.77

y/x = 5/2

Setting these two expressions equal to each other, we get:

3/7.77 = 5/2x

x = 2.08

Now that we know x, we can use one of the equations for y/x to solve for y:

y/x = 3/7.77

y/2.08 = 3/7.77

y = 0.78

Therefore, the formula of the first compound is A2.08B0.78, which we can simplify to A2B.

Answer:

Notify me if there is a prob!

Explanation:

You might think of iron as a hard, strong metal tough enough to support bridges and buildings, but that's not pure iron. What we have there is alloys of iron (iron combined with carbon and other elements), which we'll explain in more detail in a moment. Pure iron is a different matter altogether. Consider its physical properties (how it behaves by itself) and its chemical properties (how it combines and reacts with other elements and compounds).

Physical properties

Pure iron is a silvery-white metal that's easy to work and shape and it's just soft enough to cut through (with quite a bit of difficulty) using a knife. You can hammer iron into sheets and draw it into wires. Like most metals, iron conducts electricity and heat very well and it's very easy to magnetize.

Chemical properties

The reason we so rarely see pure iron is that it combines readily with oxygen (from the air). Indeed, iron's major drawback as a construction material is that it reacts with moist air (in a process called corrosion) to form the flaky, reddish-brown oxide we call rust. Iron reacts in lots of other ways too—with elements ranging from carbon, sulfur, and silicon to halogens such as chlorine.

350 mg of sodium would be ingested if you consumed 85 g of the food. This is less than the 2,300 mg (or one teaspoon of table salt) daily limit that is advised.

The body needs sodium, a mineral, to maintain the proper balance of body fluids. It is an explosively reactive alkali group metallic element that is soft, light, and silvery-white. It reacts with water. Table salt and a number of processed foods both contain sodium. Table salt is created when sodium and chlorine are combined. Nonetheless, the body can get harmed by excess sodium.

The amount of sodium in various foods, and even within the same food category, varies greatly.

But, you can ascertain the salt content per serving, which is often represented in milligrams, by looking at the nutrition facts label or ingredient list of the meal (mg). So, using a proportion, you can determine how much salt is in 85 g of the food:

(x mg sodium) / (serving size in g) = (sodium per serving in mg) / (85 g)

The amount of sodium in 85 g of the food, expressed in milligrams, can be found by solving for x. You may divide this by 1000 to get grams.

To know more about sodium, visit:

https://brainly.com/question/29327783

#SPJ1

We have 0.34 L of the remedy. A type of concentration known as % mass/volume shows how much solute is present in 100 mL of solution.

Volume is the amount of space a thing occupies, whereas mass is the amount of stuff it contains. Example: Basketball and bowling balls have roughly the same volume, but the bowling ball has a lot more mass. Make sure you understand the distinction between mass and weight before utilising measurement words.

In this instance, there are 100 mL of solution and 25 g of CuSO4.

We can use the rule of three to determine the solution:

100 mL of solution holds 25 g of solute.

Our 85 g may fit in (85.100) /25, or 340 mL.

Volume is converted from mL to L.

1L / 1000mL = 0.34 L 340ml

To know more about concentration visit:-

brainly.com/question/23729664

#SPJ1

Answer: Yes

Explanation:

Because Sodium carbonate is a salt of a strong base and weak acid.

The kinetic energy is the energy of an object in motion.

Kinetic energy is a form of energy that an object possesses due to its motion. It is defined as the energy that an object has as a result of its mass and velocity.

We know that;

KE = 1/2mv^2

PE = mgh

1) KE = 0.5 * 2300 * (32)^2

= 1177600 J

2) PE = 31 * 2.2 * 9.8

= 52.6 J

3) PE = mgh

h = PE/mg

h = 65000/525 * 9.8

h = 12.6 m

4) KE = 1/2mv2

m = 2KE/v^2

m = 2 * 370/(6.5)^2

m = 17.5 Kg

5) KE = 0.5 * 75000 * (11500)^2

KE = 4.96 * 10^12 J

Learn more about KE:https://brainly.com/question/13662622

#SPJ1

"Fluorine (F) would have a greater mass than lithium (Li) because it has more protons, neutrons, and electrons than lithium. Specifically, the atomic mass of fluorine is approximately 19 atomic mass units (amu), while the atomic mass of lithium is approximately 7 amu.

On the other hand, lithium would have a larger atomic radius than fluorine. This is because atomic radius tends to increase down a group (column) of the periodic table and decrease across a period (row). Lithium is located in Group 1 (the alkali metals) of the periodic table, while fluorine is located in Group 17 (the halogens). Elements in Group 1 have relatively large atomic radii due to their low effective nuclear charges and the shielding effect of their inner electrons.

In contrast, elements in Group 17 have relatively small atomic radii due to their high effective nuclear charges and the lack of shielding from their inner electrons. Therefore, since lithium is located in a group that has larger atomic radii, it would have a larger atomic radius than fluorine, which is located in a group with smaller atomic radii." (ChatGPT, 2023)

In chemical, deposition is the process of building an object by putting fresh layers on top of one another.

Deposition includes the direct transformation of a vapor into a solid without first going through the liquid phase. A layer of substance is added to the surface of a substrate during deposition; the substrate might be solid or liquid.

This method is employed in many different contexts, including the creation of protective coatings, optical coatings, and thin films for electrical devices. A number of methods, such as atomic layer deposition, physical vapor deposition, and chemical vapor deposition (CVD), can be used to deposit material (ALD).

A phase change from the liquid phase to the vapor phase is called vaporization (or vaporization) of an element or molecule. Both evaporation and boiling result in sublimation. Boiling is a bulk phenomenon, whereas evaporation is a surface phenomenon.

To know more about Deposition

https://brainly.com/question/2800536

#SPJ1

Answer:

The name or formula of a compound provides important information about its structure and properties.

The name of a compound often reflects the type of elements it contains and how they are bonded together. For example, a compound containing only two elements may have a name that ends in "-ide", while a compound containing a metal and a non-metal may have a name that indicates the oxidation state of the metal. The formula of a compound also gives us information about the relative number of atoms of each element present in the compound.

The structure of a compound can be deduced from its formula, and can provide insight into its properties. For example, the shape of a molecule can influence its polarity, boiling point, and reactivity. The presence of certain functional groups in an organic compound can give it specific chemical properties and reactivity.

Overall, the name and formula of a compound provide important clues about its properties and behavior, and are an essential part of understanding and working with chemical compounds.

Explanation:

Air is a mixture of various gases, including nitrogen, oxygen, carbon dioxide, and water vapor, among others. The composition of air varies depending on the location and the time of the day, making it a heterogeneous mixture.

For instance, the air composition in urban areas may be different from that in rural areas due to the presence of pollutants.

Another example of the changing composition of air is the difference in air pressure and temperature between the earth's surface and the upper atmosphere. As altitude increases, air pressure decreases, and the concentration of gases such as oxygen and carbon dioxide decreases. Therefore, the composition of air changes with altitude.

In conclusion, air is a mixture, and its composition changes from one place to another and with altitude. Understanding the variations in air composition is essential for the management of air quality and environmental protection.

To learn more about Air Composition,

https://brainly.com/question/16037434?referrer=searchResults

The percent by mass of Xe in sample A is calculated as 77.6%.

To calculate the mass percent of an element in compound, we divide the mass of element in 1 mole of compound by the molar mass of compound and multiply the result by 100.

The percent by mass of Xe in sample A can be calculated using the following formula:

percent by mass of Xe = (mass of Xe / total mass of sample) x 100%

Given mass of Xe is 77.6 g and total mass of sample is 100.0 g.

Putting these values into the formula, we get:

percent by mass of Xe = (77.6 g / 100.0 g) x 100% = 77.6%

Hence, the percent by mass of Xe in sample A is 77.6%.

To know more about percent by mass, refer

https://brainly.com/question/26150306

#SPJ1

Answer:

Looking at the balanced equation for fermentation:

C6H12O6(aq) -> 2 C2H6O(aq) + 2 CO2(g)

We can see that 1 mol of glucose (C6H12O6) produces 2 mol of ethanol (C2H6O).

So, to form 2.0 mol of ethanol, we would need:

2.0 mol ethanol x (1 mol glucose / 2 mol ethanol) = 1.0 mol glucose

Therefore, we would need 1.0 mol of glucose to form 2.0 mol of ethanol.

To convert from moles of glucose to grams, we can use the molar mass of glucose, which is approximately 180.16 g/mol.

Mass of glucose needed = 1.0 mol x 180.16 g/mol = 180.16 g

Therefore, we would need 180.16 grams of glucose to form 2.0 mol of ethanol.

Answer:

Answer. Mass of object is 8.16 kg (or 8 kg if g = 10 m/s²)

Explanation:

One way to calculate mass: Mass = volume × density. Weight is the measure of the gravitational force acting on a mass. The SI unit of mass is "kilogram". The SI unit of weight is Newton (N).

Answer: We can use Raoult's Law to solve for the molar mass of the solute:

ΔP = P°_solvent x mole fraction of solute x vapor pressure of solute

Since the solute is nonvolatile, its vapor pressure is negligible and we can assume that it is equal to zero. Thus, we can simplify the equation to:

ΔP = P°_solvent x mole fraction of solute

Solving for the mole fraction of solute:

ΔP / P°_solvent = mole fraction of solute

Plugging in the values:

(23.7 torr - 22 torr) / 23.7 torr = mole fraction of solute

mole fraction of solute = 0.072

Now we can use the mole fraction of solute to calculate the moles of solute dissolved in the solution:

moles of solute = mole fraction of solute x moles of solvent

moles of solvent = (25 mL / 1000 mL) x (1 g/mL) / (18.015 g/mol) = 0.001385 mol

moles of solute = 0.072 x 0.001385 mol = 0.0001 mol

Finally, we can calculate the molar mass of the solute:

molar mass of solute = mass of solute / moles of solute

mass of solute = 1.02 g

molar mass of solute = 1.02 g / 0.0001 mol = 102 g/mol

Therefore, the molar mass of the solute is 102 g/mol.

Brainiest is Appreciated.  

A contraption that swiftly prepares food is run by infrared rays. Microwaves employ infrared rays to heat meals by warming any water that may be present.

Numerous food production processes, including drying, boiling, heating, peeling, polyphenol recovery, freeze-drying, antioxidant recovery, microbiological inhibition, sterilizing grains, baking bread, roasting food, making juices, and cooking food, all use infrared technology.

Infrared radiation has the ability to ease or release muscle tension and encourage local blood circulation in the body. Infrared radiation has been used in conventional and modern medicine to treat conditions including autoimmune diseases and issues with wound healing in addition to relieving muscle pain and tension.

To learn more about infrared waves visit:

brainly.com/question/30309627

#SPJ1

Answer:

39.119 g

Explanation:

1 mole of S has 32.065 g

=> 1.22 x 32.065 = 39.1193 or 39.119 g

The limiting reactant would be  H₂O.

The mass of the excess reactant would be 13.05 grams

Number of moles of P₂O5 = mass / molar mass

Number of moles of P₂O5 = 55 g / 141.88 g/mol

Number of moles of P₂O5 = 0.388 moles

Number of moles of H₂O = mass / molar mass

Number of moles of H₂O = 16 g / 18.02 g/mol

Number of moles of H₂O = 0.888 moles

Using the balanced chemical equation, we see that 1 mole of P₂O5 reacts with 3 moles of H₂O to produce 2 moles of H3PO4. Therefore, to react with all the P₂O5, we would need:

0.388 moles of P₂O5 × (3 moles of H₂O / 1 mole of P₂O5) = 1.164 moles of H₂O

Since we only have 0.888 moles of H₂O, it is the limiting reactant.

To determine the amount of excess P₂O5, we need to find how many moles of H₂O would be needed to react with all the P₂O5:

0.888 moles of H₂O × (1 mole of P₂O5 / 3 moles of H₂O) = 0.296 moles of P₂O5

The amount of excess P₂O5 is the initial moles of P₂O5 minus the moles of P₂O5 required to react with all the H₂O:

0.388 moles of P₂O5 - 0.296 moles of P₂O5 = 0.092 moles of excess P₂O5

Mass = 0.092 x 141.88 = 13.05 grams

More on stoichiometric problems can be found here: https://brainly.com/question/29775083

#SPJ1

Answer: History. Einsteinium was discovered in the debris of the first thermonuclear explosion which took place on a Pacific atoll, on 1 November 1952. Fall-out material, gathered from a neighboring atoll, was sent to Berkeley, California, for analysis.

; Discovered by, Albert Ghiorso and colleagues; Origin of the name, Einsteinium is named after the renowned physicist Albert Einstein.

Answer:

Albert Ghiorso

Explanation:

Albert Ghiorso discovered Einsteinium in 1952 in the debris of the first thermonuclear explosion.

Condensation happens more quickly when water vapour is made colder. The rate of condensation increases as the amount of water vapour in the air increases.

When condensation takes place, the latent heat of condensation that is provided to the air is released by the water vapour that is already there. The temperature of the air rises as a result of the heat being absorbed.

Condensation happens at higher temperatures in humid environments. Despite relatively low humidity, condensation happens when it's cold outside. Condensation forms on windows and doors due to the temperature differential between the environment, whether interior or exterior, and the glass.

To know more about Condensation visit:-

brainly.com/question/11516584

#SPJ1

Answer: The answer is 4

Explanation:

The pH of the medium used for titration has an impact on the titrant used in redox titration, potassium permanganate (KMnO4). The oxidizing action of KMnO4 is greater in acidic than in basic media.

Permanganate titrations must be performed in a strong acid solution. Because nitric acid and hydrochloric acid might participate in conflicting oxidation-reduction reactions, lowering the accuracy of the titration, sulfuric acid is typically employed for this purpose.

MnO4-4 is a greenish-brown substance that turns deep purple when combined with acid, which alters its color from the acid solution.

To learn more about redox titration visit:

brainly.com/question/28196355

#SPJ1

A portion of the SO2 undergoes acid precipitation and becomes sulfuric acid. In this instance, 903.34 grams of SO2 and 1804 grams of O2 must react.

O2's molecular mass is equal to twice its atomic weight in grams per mole, or 32 g/mol.

O2 mass divided by its molecular mass yields the number of moles of oxygen: 1804 g divided by 32 g/mol, or 56.375 mol.

Amount of SO2 molecules equals 1/2 x Number of O2 molecules, or 28.1875 mol

Amount of moles of SO2 x their molecular mass equals 28.1875 mol x 32.06 g/mol, or 903.34 g, for the mass of SO2.

To learn more about Sulphur Dioxide visit:

brainly.com/question/30247071

#SPJ1

Acid precipitation transforms some of the SO₂ into sulfuric acid. 903.34 grams of SO₂ and 1804 grams of O₂ must react in this case.

O₂'s molecular mass is equal to twice its atomic weight in grams per mole, or 32 g/mol.

O₂ mass divided by its molecular mass yields the number of moles of oxygen: 1804 g divided by 32 g/mol, or 56.375 mol.

Amount of SO₂ molecules equals 1/2 x Number of O₂ molecules, or 28.1875 mol

Amount of moles of SO₂ x their molecular mass equals 28.1875 mol x 32.06 g/mol, or 903.34 g, for the mass of SO₂.

To learn more about Sulphur Dioxide :

brainly.com/question/30247071

#SPJ1

Answer:

It's (d) 4.65 ≃ 4.7

Explanation:

By understanding that a mole  is the unit of amount of substance that equals Avogadro's number ([tex]N_a[/tex] = 6.022*10^23)

we make a ratio of moles as below:

2KClO3 --> 2KCl + 3O2
2        :        2     :    3
3.1      :        ?      :    ?

part value = 3.1 / 2 = 1.55

number of moles of O2 yielded from this reaction = 1.55 * 3 = 4.65 moles

Answer: Atoms of oxygen in 30.5 grams of Fe2O3 = 7.65 x 10^22 atoms

Explanation: To determine the number of atoms of oxygen in 30.5 grams of Fe2O3, we first need to calculate the number of moles of Fe2O3, and then use the mole ratio between Fe2O3 and O atoms to calculate the number of O atoms.

The molecular weight of Fe2O3 can be calculated by adding the atomic weights of two Fe atoms and three O atoms:

Molecular weight of Fe2O3 = (2 x atomic weight of Fe) + (3 x atomic weight of O)

= (2 x 55.85 g/mol) + (3 x 16.00 g/mol)

= 159.69 g/mol

So, 30.5 g of Fe2O3 is equal to:

Number of moles = Mass / Molecular weight

= 30.5 g / 159.69 g/mol

= 0.191 moles

The mole ratio between Fe2O3 and O atoms is 3:2. This means that for every 3 moles of Fe2O3, there are 2 moles of O atoms. Therefore, the number of moles of O atoms in 0.191 moles of Fe2O3 is:

Number of moles of O atoms = 2/3 x 0.191 moles

= 0.127 moles

Finally, we can use Avogadro's number to convert the number of moles of O atoms into the actual number of O atoms:

Number of O atoms = Number of moles x Avogadro's number

= 0.127 moles x 6.022 x 10^23 atoms/mol

= 7.65 x 10^22 atoms

Therefore, there are 7.65 x 10^22 atoms of oxygen in 30.5 grams of Fe2O3.

A complex molecule known as an organic is composed primarily of carbon atoms joined to other elements and/or other carbon atoms.

Although the distinction between "organic" and "inorganic" is disputed, many authors in the field of chemistry believe that any chemical compound that contains carbon-hydrogen or carbon-carbon bonds is considered to be an organic compound. Methane is an example of an organic compound, but opinions on whether carbon halides without hydrogen (such as carbon tetrachloride,  are organic or inorganic vary from author to author.

Millions of organic substances have been identified as a result of carbon's capacity to catenate (form strands with other carbon atoms).

Learn more about  organic molecules

https://brainly.com/question/10504103

#SPJ1