Calcium reacts with sulfur forming calcium sulfide. What is the theoretical yield (g) of CaS(s) that could be prepared from 7.19 g of Ca(s) and 2.67 g of sulfur(s)? Enter your answer with two decimal places. Do not type units with your answer.
Answer:
The theoretical yield of CaS is 6.01 g.
Explanation:
The balanced reaction is given as:
[tex]Ca+S\rightarrow CaS[/tex]
The molar mass of Ca and S is 40.08 and 32.065 g/mol respectively.
Number of moles = [tex]\frac{Mass}{Molar Mass}[/tex]
So, 7.19 g of Ca contains [tex](\frac{7.19}{40.08})[/tex] mol of Ca or 0.179 mol of Ca
Also, 2.67 g of S contains [tex](\frac{2.67}{32.065})[/tex] mol of S or 0.0833 mol of S
According to the balanced equation:
1 mol of Ca produces 1 mol of CaS
So, 0.179 mol of Ca produces 0.179 mol of CaS
According to the balanced equation:
1 mol of S produces 1 mol of CaS
So, 0.0833 mol of S produces 0.0833 mol of CaS
As the least number of mol of CaS (product) is produced from S , therefore, S is the limiting reactant.
So, thoretically, 0.0833 mol of CaS is produced.
The molar mass of CaS is 72.143 g/mol.
So, the mass of 0.0833 mol of CaS is [tex](0.0833\times 72.143)[/tex] g or 6.01 g
Hence, the theoretical yield of CaS is 6.01 g.
Match the following terms and definitions.
1. major ecological grouping of plants and animals
food chain
biome
environmental factor
decomposers
2. bacteria and fungi that break down dead matter
a state of change in which the end result is equal or
3.
balanced
the basic relationships that show how a community of plants,
animals, and bacteria live and grow and how these living
4. things are dependent on each other as well as the Sun, soil,
and other nonliving parts of their environment; a cycle of
relationships
line of plants and animals that shows the order in which
5.
organisms are eaten
a condition or conditions of the nonliving surroundings, such
6.
as light, temperature, water, and so on
ecosystem
dynamic equilibrium
Answer:
major ecological grouping of plants and animals
food chain
*biome*
bacteria and fungi that break down dead matter
*decomposers*
a state of change in which the end result is equal or
balanced
*dynamic equilibrium*
the basic relationships that show how a community of plants,
animals, and bacteria live and grow and how these living
*ecosystem*
things are dependent on each other as well as the Sun, soil,
and other nonliving parts of their environment; a cycle of
relationships
line of plants and animals that shows the order in which
*Food chain*
organisms are eaten
a condition or conditions of the nonliving surroundings, such
*environmental factor*
Explanation:
What can the chemical formula tell us about a compound?
Answer:
A chemical formula tells us the number of atoms of each element that is in a compound. It contains the symbols of the atoms for the elements present in the compound as well as how many there are for each element in the form of subscripts.
Hope this helps! please mark me brainliest!
God bless :)
1. Determine the electron-domain geometry and molecular geometry for each of the following.
a. SBr2
b. PI4+
c. IBr2−
2. The following three compounds all have the same general formula, XF4. Compare the electron-domain geometries of these three compounds and explain what characteristic(s) of the central atom causes differences in geometry.
a. SiF4:
b. SeF4:
c. XeF4:
Answer:
SBr2: Electron geometry-tetrahedral; molecular geometry-trigonal pyramidal
PI4+: Electron geometry-tetrahedral; molecular geometry-tetrahedral
IBr2−: Electron geometry- Trigonal bipyramidal ; molecular geometry- linear
Explanation:
In SBr2, the molecule is of the structure type AX2E2 hence it is based on a tetrahedron but have two lone pairs of electrons hence the molecular geometry is trigonal pyramidal.
PI4+ has four electron domains and all of them are bond pairs hence both electron geometry and molecular geometry are both tetrahedral.
IBr2- is of the structure type AX2E3 hence it is based on a trigonal bipyramd and has a linear molecular geometry.
2)
SiF4 has a tetrahedral molecular and electron domain geometry because the central atom(Si) has no lone pairs.
SeF4 has a trigonal bipyramidal electron geometry with the structure AX4E. Its molecular geometry is See-saw since it has one lone pair of electrons that causes a deviation from its ideal trigonal bypyramidal geometry.
XeF4 has an octahedral electron domain geometry and the molecule is AX4E2. The two lone pairs are positioned above and below the plane of a square hence the molecule is square planar.
A sample of an ideal gas has a volume of 2.23 L at 289 K and 1.05 atm. Calculate the pressure when the volume is 1.08 L and the temperature is 304 K. P= atm
Answer:
2.28 atm
Explanation:
V₁ = 2.33L, V₂ = 1.08L
T₁ = 289K, T₂ = 304K
P₁ = 1.05 atm, P₂ = ?
Where V₁ and V₂ are initial and final volume respectively
T₁ and T₂ are initial and final temperature respectively
P₁ and P₂ are initial and final pressure respectively
The formula to be used here is the general gas equation:
P₁V₁/T₁=P₂V₂/T₂
1.05 × 2.23/289 = P₂ × 1.08/304
P₂ × 1.08 × 289 = 1.05 × 2.23 × 304
P₂ = (1.05 × 2.23 ×304) ÷ (1.08 × 289)
P₂ = 711.82 ÷ 312.12
P₂ = 2.28 atm
The solubility of silver(I)phosphate at a given temperature is 2.43 g/L. Calculate the Ksp at this temperature. After you calculate the Kspvalue, take the negative log and enter the (pKsp) value with 2 decimal places.
Answer:
Kps = 3.07 x 10⁻⁸
pKsp= 7.51
Explanation:
First, we calculate the molar solubility of silver(I)phosphate (Ag₃PO₄) from the solubility in g/L by using its molar mass (418.6 g/mol):
2.43 g/L x 1 mol/418.6 g = 5.8 x 10⁻³ mol/L= s
Now, we have to write the ICE chart for the aqueous equilibrium of Ag₃PO₄ as follows:
Ag₃PO₄(g) ⇄ 3 Ag⁺(aq) + PO₄³⁻
I 0 0
C +3s +s
E 3s s
Ksp = [Ag⁺]³[PO₄³⁻]= (3s)³s= 27s⁴
Since s=5.8 x 10⁻³ mol/L, we calculate Ksp:
Ksp= 27(5.8 x 10⁻³ mol/L)⁴= 3.07 x 10⁻⁸
The pKsp value is:
pKsp= - log Ksp = -log (3.07 x 10⁻⁸) = 7.51
convert 575.1 mmHg to atm
Answer:
= .7567105263
Explanation:
1 atm = 760 mmHg
575.1 mmHg (1 atm/760mmHg) = .7567105263 atm
Label the parts of the electric circuit that best correspond to the heart, arteries, veins, and cells.
Answer:
1 ➡️ Cells
2 ➡️ Arteries
3 ➡️ Veins
4 ➡️ Heart
Explanation:
The parts of the electric circuit that best correspond to the heart, arteries, veins, and cells have been properly labeled.
The circulatory system involves the transportation of nutrients, oxygen and water by blood to other the parts of the body.
From the electric circuit, we see that arteries transport blood away from the heart to the other cells in the body. The veins actually return the blood back to the heart from the cells. The heart pumps the blood
The electric circuity diagram has the label 1 bulb analogous to cell, label 2 analogous to arteries, label 3 analogous to veins, and label 4 cell analogous to heart.
What is an electric circuit?The electric circuit has been given as the power source and the conducting wires that allows the flow of the current in the circuit.
In the human body, the heart has been transported the oxygenated blood through the arteries to the cell and carried the deoxygenated blood from the cells back to the heart via veins.
In the circuit, the battery has been the source of the power/blood. The current has been carried from the heart to the cell/bulb through the arteries labeled, 2, and transported back to the battery via veins labeled 3.
Learn more about the electric circuits, here:
https://brainly.com/question/21075693
SOMEONE PLEASE HELPPP
a change of matter is a physical change
True or False
Answer:
true
Explanation:
hope it helps
Answer:
I'm pretty sure it's true
Explanation:
20 characters
How many atoms of Chlorine are in 1.00 mol of Chlorine gas?
6.022 x 10∧23
3.01 x 10∧23
6.022 x 10∧24
Answer:
6.02 × 10²³ atoms Cl₂
Explanation:
Avagadro's Number - 6.022 × 10²³ atoms, molecules, formula units, etc.
Step 1: Define
1.00 mol Cl₂ (g)
Step 2: Use Dimensional Analysis
[tex]1.00 \hspace{3} mol \hspace{3} Cl_2(\frac{6.02(10)^23 \hspace{3} atoms \hspace{3} Cl_2}{1 \hspace{3} mol \hspace{3} Cl_2} )[/tex] = 6.02 × 10²³ atoms Cl₂
A chemical engineer must calculate the maximum safe operating temperature of a high-pressure gas reaction vessel. The vessel is a stainless-steel cylinder that measures 41.0cm wide and 49.2cm high. The maximum safe pressure inside the vessel has been measured to be 3.70MPa. For a certain reaction the vessel may contain up to 2.50kg of dinitrogen difluoride gas.
Required:
Calculate the maximum safe operating temperature the engineer should recommend for this reaction. Write your answer in degrees Celsius. Be sure your answer has the correct number of significant digits.
Answer:
[tex]T=2.78x10^3 \°C[/tex]
Explanation:
Hello,
In this case, considering that the safe temperature may be computed via the ideal gas law as we now the pressure, mass and volume via the dimensions:
[tex]V=\pi r^2 h=\pi *(41.0cm)^2*49.2cm=2.60x10^5cm^3*\frac{1L}{1000cm^3} =260L[/tex]
The pressure in atm is:
[tex]P=3.70MPa*\frac{1x10^6Pa}{1MPa} \frac{1atm}{101325Pa} =36.5atm[/tex]
And the moles considering the mass and molar mass (66 g/mol) of dinitrogen difluoride (N₂F₂):
[tex]n_{N_2F_2}=2.50kg*\frac{1000g}{1kg}*\frac{1mol}{66g} =37.9mol[/tex]
In sich a way, by applying the ideal gas equation, which is not the best assumption but could work as an approximation due to the high temperature, the temperature, with three significant figures, will be:
[tex]T=\frac{PV}{nR}=\frac{36.5Pa*260L}{37.9mol*0.082\frac{atm*L}{mol*K} }\\ \\T=3053.6K-273.15\\\\T=2.78x10^3 \°C[/tex]
Best regards.
why are copper pipes used in place of old lead pipes for plumbing systems?
Based on the visible cell structure, which of the following statements is true?
Answer:I think it would be the third one.
Explanation:
What occurs after cytokinesis is completed at the end of meiosis I?
O Four haploid cells are formed.
O Two diploid cells are formed.
OTwo haploid cells are formed.
O Four diploid cells are formed.
Answer. After cytokinesis is completed at end of meiosis - I two haploid cells are formed.on:
Answer:
C. TWO HAPLOID CELLS ARE FORMED
Explanation:
I TOOK THE EDGUNITY TEST AND I GOT IT CORRECT
What is the volume of a substance that has a mass of 59 g and a density of 1.98 g/mL?
(show all work)
Answer:
29.8
Explanation:
The formula for volume is mass/ density, so 59/1.98. 29.8 is the answer.
A student was performing a separation of a mixture of organic compounds. The final step of the process involved a filtration of the analyte from an aqueous solution. After drying the filtered solid for a very short period time, they took the melting point of the compound. The measured melting point range of the compound was 106 – 113.8 0C, while the literature melting point of the compound was 122.3 0C. The above scenario is a very common one in organic labs.
1. Do you think their sample was pure?
2. If not, then what do you think could be the source of error.
3. How do you think this error can be minimized?
Answer:
1) No
2) The solvent contaminated the analyte
3) The solvent should be evaporated properly before washing and drying the analyte
Explanation:
During separation of organic compounds, solvents are used. These solvents are able to contaminate the analyte and lead to a large difference in melting point of solids obtained.
However, the error can be minimized by evaporating the solvent before washing, drying and melting point determination of the solid.
The smallest form of matter that still retains the properties of an element
Answer:
atom
Explanation:
the atom is the smallest form.
Determine the value of the equilibrium constant (report your answer to three significant figures) for the following reaction if an equilibrium mixture contains 0.010 mol of solid PbBr2, and is 0.0100 M in Pb2+ ions and 0.0250 M in Br1- ions. Use the notation 4.31e-5 to indicate a number such as 4.31 x 10-5.
Answer:
6.25e-6 is the value of the equilibrium constant
Explanation:
we have this equation
[tex]PbBr(s) ----- Pb^{2+}(aq) + 2Br(aq)[/tex]
When at a state of equilibrium,
we have the concentration of Pb^2+ to be 0.01
we have the concentration of Br^- to be 0.025
the equilibrium constant concentration of both pure solids and liquid s are said to be equal to 1
[PbBR2] = 1
such tht
Keq = [Pb^2+] x [Br-]^2
we already know the values of these from the above.
0.01x0.025^2
= 0.01 x 0.000625
= 0.00000625
= 6.25 x 10^-6
= 6.25e^-6
Which of the following is a good definition of matter?
O A. Anything that is made up of light and gravity
O B. Anything that has mass and takes up space
O C. Anything that produces heat and mass
O D. Anything that has energy and creates heat
Answer:
B
Explanation:
I did the question before and got it right.
Which statement describes how this rock was likely formed?
slow cooling of magma beneath the surface of Earth
rapid cooling of magma beneath the surface of Earth
slow cooling of lava on the surface of Earth
rapid cooling of lava on the surface of Earth
I will mark Brainlyest
Answer:
A
Explanation:
Slow cooling of magma beneath the surface of earth
To solve this we must be knowing each and every concept related to rock and its formation. Therefore, the correct option is option A among all the given options.
What is rock?Rock is a naturally occurring mineral aggregate that is cohesive and composed of one or even more minerals. These aggregates often take the shape of recognisable and mappable volumes and are the fundamental building block of the solid Earth.
Mineral crystals as well as the sorts of rocks that serve as their hosts cycle through many forms as geologic materials. Temperature, weight, time, and variations in the climate in the Earth's crust and on its surface all play a role in the process. Slow cooling of magma beneath the surface of Earth is the statement that best describes the formation of rock.
Therefore, the correct option is option A.
To learn more about rock, here:
https://brainly.com/question/29767269
#SPJ2
What happens when the elements in group 2 react with water?
Answer:
The Group 2 metals become more reactive towards the water as you go down the Group.
Explanation:
These all react with cold water with increasing vigour to give the metal hydroxide and hydrogen. ... You get less precipitate as you go down the Group because more of the hydroxide dissolves in the water. Summary of the trend in reactivity.
Please mark me brainliest! hope this helped!
God bless!
Which of the following is NOT a strong electrolyte?
:
Answers:
Na2SO4
KI
CaCl2
LiOH
C6H1206
Answer:
C6H1206
Explanation:
C6H12O6 is a monomer of carbohydrates also known as glucose, so it is not an electrolyte at all.
An ideal gaseous reaction (which is a hypothetical gaseous reaction that conforms to the laws governing gas behavior) occurs at a constant pressure of 35.0 atm and releases 74.6 kJ of heat. Before the reaction, the volume of the system was 8.20 L . After the reaction, the volume of the system was 2.80 L . Calculate the total internal energy change, ΔE, in kilojoules.
Answer:
ΔU = −55.45 kJ
Explanation:
From first law of thermodynamics in chemistry, we have;
ΔU = Q + W
where;
ΔU is change in internal energy
Q is the net heat transfer
W is the net work done
We are given;
Q = 74.6 kJ
But Q will be negative since heat is released
Thus;
ΔU = -74.6 kJ + W
We are given;
Constant pressure; P = 35 atm = 35 × 101325 = 3546375 N/m²
Volume before reaction; Vi = 8.2 L = 0.0082 m³
Volume after reaction; V_f = 2.8 L = 0.0028 m³
Now,
W = -P(V_f - V_i)
W = - 3546375(0.0028 - 0.0082)
W = 19.15 KJ
Thus;
ΔU = Q + W
ΔU = -74.6 kJ + 19.15 KJ =
ΔU = −55.45 kJ
What do you need to measure the amount of energy in food
Answer:
u measure how much power it has
Explanation:
for example u can power a light bulb woth it if u can it was 100eg energy
Scientists are experimenting with pure samples of isotope X which is radioactive. The sample has a mass of 20. Grams. The half-life was measured to be 232 seconds. There is a second sample that weighs 80 grams. What is the half-life of the second sample
Answer:
Explanation:
Half life of radioactive materials do not depend upon the mass of the material . It only depends upon the nature of radioactive materials . The half life of 20 g is 232 seconds . That means 20 gram will be reduced to 10 gram in 232 seconds .
Half life of 80 gram is also 232 seconds . So , 80 gram will be reduced to 40 gram in 232 second .
how many grams of oxygen are there in 66.2 g of nitrous acid
Answer:
15.9994 grams
You can view more details on each measurement unit: molecular weight of Oxygen or grams The molecular formula for Oxygen is O. The SI base unit for amount of substance is the mole. 1 mole is equal to 1 moles Oxygen, or 15.9994 grams.
Explanation:
Answer:
First you need to know the Chemical formula for Nitrous acid which is HNO₂
Explanation:
How many moles of precipitate will be formed when 100.0 mL of 0.200 M NaBr is reacted with excess Pb(NO₃)₂ in the following chemical reaction?
2 NaBr (aq) + Pb(NO₃)₂ (aq) → PbBr₂ (s) + 2 NaNO₃ (aq)
Answer : The number of moles of precipitate, [tex]PbBr_2[/tex] formed will be 0.01 moles.
Explanation : Given,
Concentration of NaBr = 0.200 M
Volume of solution = 100.0 mL = 0.1 L (1 L = 1000 mL)
First we have to calculate the moles of NaBr.
[tex]\text{Moles of NaBr}=\text{Concentration of NaBr}\times \text{Volume of solution in L}[/tex]
[tex]\text{Moles of NaBr}=0.200M\times 0.1L=0.02mol[/tex]
Now we have to calculate the moles of precipitate, [tex]PbBr_2[/tex] formed.
The balanced chemical reaction is:
[tex]2NaBr(aq)+Pb(NO_3)_2(aq)\rightarrow PbBr_2(s)+2NaNO_3(aq)[/tex]
From the balanced chemical reaction we conclude that:
As, 2 moles of NaBr react to give 1 mole of [tex]PbBr_2[/tex]
So, 0.02 moles of NaBr react to give [tex]\frac{0.02}{2}=0.01[/tex] mole of [tex]PbBr_2[/tex]
Therefore, the number of moles of precipitate, [tex]PbBr_2[/tex] formed will be 0.01 moles.
The number of mole of the precipitate (i.e PbBr₂) formed when 100 mL of 0.2 M NaBr react with excess Pb(NO₃)₂ is 0.01 mole
We'll begin by calculating the number of mole of NaBr in 100 mL of 0.2 M NaBr solution. This can be obtained as follow:Volume = 100 mL = 100 / 1000 = 0.1 L
Molarity of NaBr = 0.2 M
Mole of NaBr =?Mole = Molarity x Volume
Mole of NaBr = 0.2 × 0.1
Mole of NaBr = 0.02 mole Finally, we shall determine the number of mole of the precipitate (i.e PbBr₂) produced from the reaction. This can be obtained as follow:2NaBr(aq) + Pb(NO₃)₂(aq) → PbBr₂(s) + 2NaNO₃ (aq)
From the balanced equation above,
2 moles of NaBr reacted to produce 1 mole of PbBr₂.
Therefore,
0.02 mole of NaBr will react to produce = [tex]\frac{0.02}{2} \\\\[/tex] = 0.01 mole of PbBr₂.
Thus, the number of mole of the precipitate (i.e PbBr₂) produced from the reaction is 0.01 mole
Learn more: https://brainly.com/question/19572703
True or False: Particles that are moving faster have a higher temperature
Answer:
true
Explanation:
I'm not sure why cause I dont know how to explain but it's TRUE
Answer:
True
Explanation:
The particles moving faster in a substance the hotter it gets.
A sample of an unknown gas weighs 0.419 grams and produced 5.00L of gas at 1.00atm (unknown gas only) and 298.15K, what is the molar mass (g/mole) of this unknown gas
Answer:
molar mass of unknown gas = 1.987 g/mol
Explanation:
First, the number of moles of the unknown gas is found
Using the ideal gas equation: PV = nRT
P = 1.00 atm, V = 5.00 L, T = 298.15 K, R = 0.082 L.atm.mol⁻¹K⁻¹
n = PV/RT
n = (1.00 atm * 5.00 L)/(298.15 K *0.082 L.atm.mol⁻¹K⁻¹)
n = 0.2109 moles
Molar mass = mass/ number of moles
molar mass = 0.419 g/ 0.2109 mols
molar mass of unknown gas = 1.987 g/mol
The molar mass of unknown gas by using ideal gas equation = 1.987 g/mol.
Ideal gas equationThis equation gives the relation between pressure, volume, temperature as given below:
[tex]PV = nRT[/tex]
P = 1.00 atm, V = 5.00 L, T = 298.15 K, R = 0.082 L.atm.mol⁻¹K⁻¹
Substitute the above values in the above equation as follows:
n = (1.00 atm * 5.00 L)/(298.15 K *0.082 L.atm.mol⁻¹K⁻¹)
n = 0.2109 moles
Formula for molar mass[tex]Molar mass = mass/ number of moles[/tex]
Calculate molar mass by using the above equation,
molar mass = 0.419 g/ 0.2109 moles
The molar mass of unknown gas = 1.987 g/mol
Find more information about ideal gas equation here,
brainly.com/question/4147359