The voltage is V = I × R = 5 ohms.
The voltage across a 5 ohm resistor when the switch has been in position a for a long time is determined by Ohm’s Law.
This law states that the voltage (V) across a resistor is equal to the current (I) through it multiplied by the resistance (R). Therefore, the voltage across the 5 ohm resistor is V = I × R = 5 ohms.
This voltage can also be found by considering the flow of electrons. In a circuit with a battery and a switch, electrons flow from the positive terminal of the battery to the negative terminal.
When the switch is in position a, the 5 ohm resistor is in the path of the electrons and acts as a barrier.
This resistance causes the electrons to slow down and the voltage across the resistor is determined by the amount of this resistance.
The voltage across the 5 ohm resistor when the switch has been in position a for a long time is determined by Ohm’s Law and the amount of resistance the resistor provides. The voltage is V = I × R = 5 ohms.
to know more about voltage refer here:
https://brainly.com/question/29445057#
#SPJ11
g what is the relationship between the wavelength of light, its color, and the energy of its photons?
Shorter wavelengths of light correspond to higher frequencies, and higher frequencies of light correspond to more energy in the photons. This means that the color of light is related to the energy of its photons: the higher the frequency of light, the higher the energy of its photons and the closer the color is to the blue end of the visible light spectrum.
The relationship between the wavelength of light, its color, and the energy of its photons is as follows:
The energy of a photon is directly proportional to its frequency and inversely proportional to its wavelength. In simpler terms, the shorter the wavelength of light, the greater the energy of its photons, while the longer the wavelength of light, the less energy its photons possess. The relationship between the wavelength of light and its color is also direct in that different colors are a result of light waves of different wavelengths.
The color spectrum ranges from red (longest wavelength) to violet (shortest wavelength), with colors in between, such as orange, yellow, green, blue, and indigo. This spectrum represents the visible part of the electromagnetic spectrum, with ultraviolet and infrared light having shorter and longer wavelengths, respectively. The energy of photons from these parts of the spectrum follows the same pattern as visible light, with ultraviolet photons possessing more energy than visible light photons and infrared photons possessing less energy than visible light photons.
For more such questions on wavelengths , Visit:
https://brainly.com/question/10728818
#SPJ11
a stone is thrown down off a bridge with a velocity of 5.6 m/s. what is its velocity after 3 seconds have passed?
The velocity of the stone after 3 seconds have passed can be calculated using the formula v=u + at, where v is the velocity, u is the initial velocity, a is the acceleration (in this case the acceleration due to gravity, which is 9.8 m/s2), and t is the time. Therefore, the velocity of the stone after 3 seconds have passed will be 5.6 + (9.8*3) = 23.4 m/s.
The acceleration due to gravity causes any object to accelerate as it moves. This acceleration is always constant and acts downwards. Therefore, an object thrown with an initial velocity of 5.6 m/s will continue to accelerate and its velocity will increase. After 3 seconds have passed, the object will have an increased velocity of 23.4 m/s. In addition, when the stone is thrown off the bridge, it is subject to air resistance, which works against the stone and causes it to slow down. The magnitude of air resistance is dependent on a number of factors, such as the shape and size of the object. As such, the stone's velocity after 3 seconds might be slightly lower than the calculated value of 23.4 m/s.
Know more about velocity here:
https://brainly.com/question/29523095
#SPJ11
Hodan carried a box of (5,4)m. The box had a mass of 5kg. Hodan said that over 300J of work was done on the box. Is she correct, explain your answer
Answer:
hdjsigosorodcdjjgjejfiroodofohov jdjvjwigioeofe
a load of 12 kg stretches a spring to a total length of 15 cm, and a load of 30 kg stretches it to a length of 18 cm. find the natural (unstretched) length of the spring.
The natural length of the spring is therefore 12.97 cm.
The natural length of the spring is found by calculating the spring constant using the Hooke's law formula. Spring constant (k) = Force (F) / extension (x). The natural length of the spring refers to the length of the spring when it is not carrying any load. Hooke's law states that the force required to extend or compress a spring by a distance x is proportional to that distance. Mathematically, F=kx, where F is the force applied, x is the displacement from the equilibrium position, and k is the spring constant. To find the natural length of the spring, we need to calculate the spring constant.
To do this, we use the data given in the problem. A load of 12 kg stretches the spring to a total length of 15 cm. We can find the force applied by multiplying the load by the acceleration due to gravity (g), which is 9.8 m/s^2. Thus, F = mg = 12 * 9.8 = 117.6 N. The extension of the spring is given as x = 15 cm - x0, where x0 is the natural length of the spring. Thus, x = 0.15 m - x0. Substituting these values into Hooke's law, we get: k = F/x = 117.6/(0.15 - x0)
Similarly, when a load of 30 kg stretches the spring to a length of 18 cm, we can find the force applied as F = mg = 30 * 9.8 = 294 N. The extension is given as x = 0.18 m - x0. Substituting these values into Hooke's law, we get: k = F/x = 294/(0.18 - x0)
Now we have two equations for k, so we can set them equal to each other: 117.6/(0.15 - x0) = 294/(0.18 - x0) Cross-multiplying and simplifying, we get: 117.6(0.18 - x0) = 294(0.15 - x0) 21.168 - 117.6x0 = 44.1 - 294x0 176.4x0 = 22.932 x0 = 0.1297 m
The natural length of the spring is therefore 12.97 cm.
For more such questions on Hooke's law.
https://brainly.com/question/30611861#
#SPJ11
g a cat with mass 4.50 kg is running at a speed of 6.70 m/s. what is the kinetic energy of the cat?
The kinetic energy of the cat is 177.15 Joules.
The kinetic energy of the cat can be calculated using the formula K = 0.5mv2, where m is the mass and v is the velocity.
The cat has a mass of 4.50 kg and is running at a velocity of 6.70 m/s, so we can substitute these values into the formula to find the kinetic energy:
K = 0.5 * 4.50 kg * (6.70 m/s)2
K = 177.15 Joules
Kinetic energy is the energy possessed by an object due to its motion. It is calculated by multiplying half of the object's mass by its velocity squared.
The cat has a mass of 4.50 kg and is running at a velocity of 6.70 m/s, so its kinetic energy is 177.15 Joules.
to know more about kinetic energy refer here:
https://brainly.com/question/26472013#
#SPJ11
A long solenoid has 100 turns/cm and carries current i. an electron moves within the solenoid in a circle of radius 2.30 cm perpendicular to the solenoid axis. the speed of the electron is 0.0460c (c speed of light). find the current i in the solenoid.
The current in the solenoid becomes 3.56 A.
How to find current in the solenoid?
Number of turns in the solenoid, n = 100 turns/cm
Radius of the circular path of electron, r = 2.30 cm
Speed of electron, v = 0.0460c, where c is the speed of light
To find: Current in the solenoid, i
Formula used: Magnetic field inside the solenoid,
B = μ0ni Where, μ0 = 4π × 10⁻⁷ T m/A is the permeability of free spaceSolution:
The force on a moving electron in a magnetic field is given by
F = Bev
Where B is the magnetic field, e is the charge of an electron and v is its velocity.
The force acting on the electron provides the necessary centripetal force for the electron to move in a circle of radius r.
So,
Bev = (mev²)/r
where me is the mass of an electron
On simplifying the above equation, we get
Be = (mev)/r
Put the value of B from the formula of magnetic field inside the solenoid, B = μ0ni
we get
μ0ni = (mev)/r
Solve for i,
i = (mev)/(μ0nr)
Substitute the given values and solve
i = (9.109 × 10⁻³¹ kg × 0.0460c × 3 × 10⁸ m/s)/(4π × 10⁻⁷ T m/A × 100 turns/cm × 2.30 cm)i
= 3.56 A
Therefore, the current in the solenoid is 3.56 A.
Learn more about Magnetic field.
brainly.com/question/14848188
#SPJ11
calculate the force required to stop a car of mass 1400 kg in 2 seconds if it is moving with a velocity of 10 m/s.
The force required to stop a car of mass 1400 kg in 2 seconds if it is moving with a velocity of 10 m/s is 7000 N in the opposite direction to the car's motion.
Calculate the force required to stop a car of mass 1400 kg in 2 seconds if it is moving with a velocity of 10 m/s.
To solve the given problem, we can use the equation:
F = (m * Δv) / Δt
where F = force
required to stop the carm = mass of the car Δv = change in velocity = final velocity - initial velocityΔt = time taken to stop the car.
Given, mass of the car, m = 1400 kg Initial velocity, u = 10 m/s Final velocity, v = 0 m/s Time taken to stop, t = 2 seconds Therefore, Δv = v - u = 0 - 10 = -10 m/s
Substituting the given values in the above equation, we get:
F = (m * Δv) / Δt = (1400 kg * (-10 m/s)) / (2 s) = -7000 N
Here, the negative sign indicates that the force required to stop the car is acting in the opposite direction to the car's motion.
for such more question on force
https://brainly.com/question/12785175
#SPJ11
you compress a piston full of gas and do 8.4 joules of work on it. if the internal energy (u) of the system increases by 3.3 joules, how much heat (in joules) left the system (give your answer as a positive number)?
The amount of heat that left the system is 11.7 joules (given as a positive number).
When a piston is compressed fully with gas and 8.4 joules of work is done on it, and the internal energy (u) of the system is increased by 3.3 joules, we need to determine the amount of heat that left the system.
To determine the amount of heat that left the system, we need to use the First Law of Thermodynamics, which states that the change in internal energy (u) of a system is the sum of the heat (q) added to it and the work (w) done on it, which can be represented as:
u = q + w
Where, u = Change in internal energy of the system
q = Heat added to the system
w = Work done on the system
From the given information, w = -8.4 J (since work was done on the system), and u = 3.3 J.
Therefore, substituting these values in the above equation, we get:
3.3 J = q + (-8.4 J)3.3 J + 8.4 J
q = 11.7 J
For more question on heat click on
https://brainly.com/question/934320
#SPJ11
Suppose you are standing on a skateboard or on in-line skates and you toss a backpack full of heavy books toward your friend. What do you think will happen to
you and why? Explain your answer in terms of Newton's third law of motion.
Answer: According to Newton's third law of motion, when you toss a backpack full of heavy books towards your friend while standing on a skateboard or in-line skates, there will be an equal and opposite reaction force acting on you, causing you to move in the opposite direction, which may be backward due to the conservation of momentum.
a ball is thrown upward from the ground with an initial speed of 35 m/s; at the same instant, another ball is dropped from a building 5.0 m high. after how long will the balls be at the same height?
The time taken by both balls to be at the same height is 1.02 seconds.
The time taken by two balls to be at the same heightGiven,Initial speed of the ball that is thrown upward from the ground, u = 35 m/s,Initial height of the ball that is dropped from a building, h = 5.0 m,Finding out the time taken by both balls to be at the same height,Time taken by ball that is thrown upward from the ground, t = ?
For the first ball (that is thrown upward from the ground), the acceleration, a = -9.8 m/s² (negative because it's going against the gravity).Using the formula of motion,S = ut + 1/2 at²where,S = height of the ball above the ground, t = time taken by the ball to reach that height, and u = initial speed of the ball that is thrown upward from the ground.
Here, h = S and u = 35 m/s, and a = -9.8 m/s². Then putting the values we get,h = ut + 1/2 at²5 = (35)t + 1/2 (-9.8)t²5 = 35t - 4.9t²----------------(1)Also, for the second ball (that is dropped from a building), the time taken to reach the ground can be found using the formula, h = 1/2gt². Here, h = 5.0 m.
Therefore,5 = 1/2 × (-9.8) × t²5 = -4.9t²t² = -5/-4.9t² = 1.02t = √1.02
Therefore, the time taken by both balls to be at the same height is 1.02 seconds.
Learn more about Speed
brainly.com/question/17661499
#SPJ11
a 60 kg dancer applies a horizontal force of -800 n on the dance floor. the dancer's acceleration will be
The acceleration of the dancer who applies a horizontal force of -800 N on the dance floor will be 13.33 m/s².
The formula used to calculate acceleration is as follows:F = m × a
where,F is the force,m is the mass, and,a is the acceleration
Substituting the given values in the above formula, we get:
-800 N = 60 kg × a
We can solve this equation for a, which will give us the acceleration of the dancer.
a = (-800 N) / (60 kg) = -13.33 m/s²
Therefore, the acceleration of the dancer will be 13.33 m/s².
To learn more about acceleration:
https://brainly.com/question/12550364#
#SPJ11
Two large parallel metal plates carry opposite charges. They are separated by 10 cm and p. D of 500 volts is applied on them. What is the magnitude of electric field strength between them? compute the work done by the field on a change of 2x10^-9 as it moves from higher to lower part?
(a) The magnitude of electric field in the region between the plates is [tex]\mathbf{9 , 2 5 0}$ $\mathrm{V} / \mathrm{m}$.[/tex]
(b) The magnitude of the force the field exerts on a particle with the given charge i[tex]s $2.22 \times 10^{-5} \mathrm{~N}$.[/tex]
(c) The work done by the field on the particle as it moves from the higher potential plate to the lower is[tex]$8.88 \times 10^{-7} \mathrm{~J}$.[/tex]
(d) the change of the potential energy is[tex]$8.88 \times 10^{-7} \mathrm{~J}$.[/tex]
(a) The magnitude of electric field in the region between the plates is calculated as;
[tex]$$\begin{aligned}& E=\frac{V}{d} \\& E=\frac{370}{40 \times 10^{-3}} \\& E=9,250 \mathrm{~V} / \mathrm{m}\end{aligned}$$[/tex]
(b) The magnitude of the force the field exerts on a particle with the given charge is calculated as follows;
[tex]$$\begin{aligned}& F=E q \\& F=9,250 \times 2.4 \times 10^{-9} \\& F=2.22 \times 10^{-5} \mathrm{~N}\end{aligned}$$[/tex]
(c) The work done by the field on the particle as it moves from the higher potential plate to the lower is calculated as follows;
[tex]$$\begin{aligned}& W=F d \\& W=2.22 \times 10^{-5} \times 40 \times 10^{-3} \\& W=8.88 \times 10^{-7} \mathrm{~J}\end{aligned}$$[/tex]
(d) the change of the potential energy is calculated as;
[tex]$$\begin{aligned}& \Delta U=q \Delta V \\& \Delta U=q\left(V_1-V_2\right)\end{aligned}$$$$\text { DeltaU }=2.4 \times 10^{-9}(370)$$$$\Delta U=8.88 \times 10^{-7} \mathrm{~J}$$[/tex]
Learn more about electric field
https://brainly.com/question/15170044
#SPJ4
Full Question: Two large, parallel, metal plates carry opposite charges of equal magnitude. They are separated by a distance of 40.0 mm, and the potential difference between them is 370 V
A. What is the magnitude of the electric field (assumed to be uniform) in the region between the plates?
B. What is the magnitude of the force this field exerts on a particle with a charge of 2.40 nC ?
C. Use the results of part (b) to compute the work done by the field on the particle as it moves from the higher-potential plate to the lower.
D. Compare the result of part (c) to the change of potential energy of the same charge, computed from the electric potential.
What type of element gains electrons in ionic bonding, and what type of charge will it create?
Explanation:
Nonmetals tend to gain electrons and become anions. For example, in Fig. 2.22 A, a neutral oxygen atom (O), with eight protons and eight electrons, gains two electrons. This gives it two more negative charges than positive charges and an overall charge of 2–.
the rotational speed of a flywheel increases by 40%. by what percent does its rotational kinetic energy increase? explain your answer.
The rotational kinetic energy of a flywheel increases by 80% when its rotational speed increases by 40%. This is because the rotational kinetic energy of a flywheel is directly proportional to the square of its angular velocity.
The rotational speed of a flywheel increases by 40%. The percentage increase in its rotational kinetic energy is approximately 96.8%. Suppose the initial rotational speed of the flywheel is n1 and the initial rotational kinetic energy is K.E.1. After the speed of the flywheel is increased by 40 percent, the new speed is n2 = n1 + 0.4n1 = 1.4n1.
Then the new kinetic energy K.E.2 of the flywheel is given by K.E.2 = (1/2)I(n2^2)where I is the moment of inertia of the flywheel.Since n2 = 1.4n1, we have [tex]K.E.2 = (1/2)I(1.96n1^2) = 0.98I(n1^2).[/tex].
Therefore, the percentage increase in the rotational kinetic energy of the flywheel is approximately 96.8%.
Read more about energy:
https://brainly.com/question/13881533
#SPJ11
a 170-hz sound travels through pure helium. the wavelength of the sound is measured to be 5.92 m. what is the speed of sound in helium?
The speed of sound in pure helium is approximately 1006.4 m/s.
When a sound wave travels through a medium, it produces a series of compressions and rarefactions in the medium, which causes the particles of the medium to vibrate. The speed of sound in a particular medium depends on the physical properties of the medium, such as its density, elasticity, and temperature.
The speed of sound in helium can be calculated using the formula,
speed of sound = frequency x wavelength
Given that the frequency of the sound is 170 Hz and the wavelength is 5.92 m, we can plug in these values and get,
speed of sound = 170 Hz x 5.92 m
speed of sound = 1006.4 m/s
To know more about sound, here
brainly.com/question/17095610
#SPJ4
in which region are the temperatures and pressures at which it's possible to change the phase of x by raising or lowering the temperature?
The region in which it is possible to change the phase of x by raising or lowering the temperature is: phase transition region.
This region is typically marked by an increase in pressure and a decrease in temperature. Temperature and pressure are inversely proportional to one another within this region, meaning that as pressure increases, temperature decreases and vice versa.
The exact temperature and pressure at which the phase transition occurs depends on the type of material being transitioned and its individual characteristics. For example, water boils at 100°C and 1 atm of pressure while other substances may have different boiling points.
To know more about pressure refer here:
https://brainly.com/question/30673967#
#SPJ11
Valdez notices that a wooden door in his house is difficult to open in the summer, but not in the winter. Valdez explains to Tony that the temperature of the door changes throughout the year. Tony says there is no way to measure the temperature of a solid because solids do not have a lot of thermal expansion. Valdez disagrees. Develop an argument supporting or opposing Tony's claim.
Explanation:
Tony's claim that solids do not have a lot of thermal expansion is partially true, but it is not entirely accurate. All materials, including solids, do undergo some degree of thermal expansion or contraction when their temperature changes. However, the amount of expansion or contraction varies depending on the material's coefficient of thermal expansion (CTE), which measures the material's response to temperature changes.
Some materials, like metals, have a high CTE and undergo significant expansion or contraction when their temperature changes. On the other hand, materials like ceramics and glasses have a low CTE and undergo relatively little expansion or contraction. Wood, which is the material used to make the door in Valdez's house, has a moderate CTE, meaning it undergoes some degree of expansion or contraction with changes in temperature.
Therefore, Valdez's argument is valid. The wooden door in his house experiences thermal expansion in the summer due to the higher temperatures. As the temperature increases, the particles in the wood gain kinetic energy, move faster, and create more space between each other, which results in the door expanding. Conversely, in the winter, the lower temperatures cause the particles in the wood to lose energy, move slower, and become closer to each other, which results in the door contracting.
In conclusion, while Tony's statement is correct in that solids do not have a lot of thermal expansion compared to liquids or gases, all solids, including wood, do experience some degree of thermal expansion or contraction due to changes in temperature.
What is the transfer of thermal energy called?
Answer:
Conduction
Explanation:
The process by which heat energy is transmitted through collisions between neighboring atoms
how much thermal energy in calories is absorbed by 750.0g of water when its temperature increases from 15.4c t 86.3c
750.0 g of water at a temperature of 15.4°C will absorb 9,117.2 calories of thermal energy to increase its temperature to 86.3°C. This can be calculated by using the specific heat formula:
Q = m * c * ΔT
where:
Q = thermal energy (calories)
m = mass of water (g)
c = specific heat (calories/g°C)
ΔT = change in temperature (°C)
Therefore:
Q = 750.0 g * 4.184 calories/g°C * (86.3°C - 15.4°C)
Q = 9,117.2 calories
Thermal energy is the energy generated in the form of heat. It is a type of kinetic energy that is produced by moving particles that makeup matter. The movement of molecules generates heat energy in the form of kinetic energy. The faster the molecules move, the more thermal energy is generated.
Read more about the topic of thermal energy:
https://brainly.com/question/19666326
#SPJ11
approximately how many neutrons are in a neutron star? neutron stars are composed almost entirely of neutrons and have approximately twice the mass of the sun.
Neutron stars with a mass of 1.4 solar masses will have around 1.8 x [tex]10^5^7[/tex] neutrons, are composed almost entirely of neutrons and have approximately twice the mass of the sun.
Neutron stars are composed almost entirely of neutrons and have approximately twice the mass of the sun. On average, neutron stars have about 1.4 solar masses, or 2.8 x [tex]10^3^0[/tex] kg. This means that one cubic centimeter of neutron star material has a mass of around 2.2 x [tex]10^1^4[/tex] kg. Each cubic centimeter of neutron star material contains about 1.6 x [tex]10^4^5[/tex] neutrons, or around one hundred trillion trillion neutrons. Thus, a neutron star with a mass of 1.4 solar masses will have around 1.8 x [tex]10^5^7[/tex] neutrons.
For more such questions on Neutron stars.
https://brainly.com/question/28271936#
#SPJ11
two balls are connected to 60-cm-long light strings and the other ends of the strings are fixed together as shown in the figure. one of the balls has a mass of 2.0 kg and is raised up and to the right until it is 12.0 cm higher than the other ball, which has a mass of 3.0 kg. the upper ball is released from rest and sticks to the lower ball when they collide. for the subsequent motion find the:
According to the question the speed of the balls just before they collide is 1.81 m/s.
What is collide?Collide is a term used to describe the process of two objects or particles coming into contact with each other, often resulting in a collision. In physics, the term is used to refer to the force of two objects impacting one another. In everyday language, the term is used to describe two things, such as people or ideas, coming together in a way that produces a powerful impact.
The initial energy of the system can be calculated as:
[tex]E_{initial[/tex] = m₁*g*h + 0
where m_1 is the mass of the upper ball (2.0 kg), g is the acceleration due to gravity (9.8 m/s²), and h is the vertical distance between the two balls (12.0 cm).
The final energy of the system can be calculated as:
[tex]E_{final} = (m_1 + m_2)\times v^2[/tex]
where m_1 and m_2 are the masses of the two balls (2.0 kg and 3.0 kg, respectively), and v is the velocity of the lower ball when the two balls stick together.
From these equations, we can solve for v:
[tex]v = sqrt[(m_1\timesg\timesh)/(m_1 + m_2)] = sqrt[(2.0 kg\times9.8 m/s^2\times12.0 cm)/(2.0 kg + 3.0 kg)] = 1.81 m/s[/tex]
Therefore, the velocity of the lower ball when the two balls stick together is 1.81 m/s.
To learn more about collide
https://brainly.com/question/29312023
#SPJ1
The sound level produced by one singer is 71.8 dB. What would be the sound level produced by a chorus of 45 such singers (all singing at the same intensity at approximately the same distance as the original singer)? Answer in units of dB.
The sound level produced by a chorus of 45 singers would be approximately 88.3 dB.
How to find the sound level produced by a chorus of 45 singers?Assuming that the sound level of each singer is independent and the same, the sound level produced by a chorus of 45 singers can be calculated using the following formula:
L2 = L1 + 10 log (N2/N1)
where:
L1 = the sound level of one singer = 71.8 dB
N1 = the number of singers in the original group = 1
N2 = the number of singers in the new group = 45
L2 = the sound level of the new group
Substituting the values in the formula, we get:
L2 = 71.8 + 10 log (45/1)
L2 = 71.8 + 10 log (45)
L2 = 71.8 + 16.5
L2 = 88.3 dB
Therefore, the sound level produced by a chorus of 45 singers would be approximately 88.3 dB, assuming all the singers are singing at the same intensity at approximately the same distance as the original singer.
Learn about sound level here https://brainly.com/question/15118883
#SPJ1
one of the forks is known to vibrate at 588.0 hz. what are the possible vibration frequencies of the second tuning fork?
The other tuning fork will vibrate at either 293.0 Hz or 884.0 Hz, as these are the two frequencies that are an octave away from 588.0 Hz.
Assuming that the second tuning fork is identical to the first one, the possible vibration frequencies of the second tuning fork can be determined based on the principle of resonance.
When two tuning forks of the same frequency are placed near each other, the sound waves produced by one fork will cause the other fork to vibrate at the same frequency, resulting in a resonance effect.
The frequency of the first tuning fork is given as f1 = 588.0 Hz.
The frequency of the second tuning fork (f2) that will produce resonance with the first tuning fork can be calculated using the formula:
f2 = nf1
where n is a positive integer (1, 2, 3, ...) representing the harmonic number.
Therefore, the possible vibration frequencies of the second tuning fork are:
For n = 1, f2 = 1 × 588.0 Hz = 588.0 Hz
For n = 2, f2 = 2 × 588.0 Hz = 1176.0 Hz
For n = 3, f2 = 3 × 588.0 Hz = 1764.0 Hz
and so on.
Note that in practice, the second tuning fork may not be identical to the first one, and there may be slight variations in the vibration frequencies due to factors such as manufacturing tolerances, temperature, and humidity.
Learn more about vibration frequencies at: https://brainly.com/question/26082584
#SPJ11
The possible vibration frequencies of the second tuning fork are 1176 H.
What is a tuning fork?A tuning fork is a tool that produces a pure musical tone when struck. The tone is usually the musical note that corresponds to the tool's vibration frequency. The tines on a tuning fork are constructed of a long steel rod that has been forged into the shape of a U. The tines are then cut to the proper length and shape to allow them to vibrate at a certain frequency.
One of the forks is known to vibrate at 588.0 Hz. The possible vibration frequencies of the second tuning fork are multiples of 588.0 Hz. When two tuning forks are struck, they will vibrate in sympathy with one another if their vibration frequencies are the same or a multiple of the same frequency. Therefore, the possible vibration frequencies of the second tuning fork are 588.0 Hz × 2 = 1176 Hz.
For more information about tuning fork refers to the link: https://brainly.com/question/13032605
#SPJ11
a 4.0 kg body has two times the kinetic energy of an 8.5 kg body. calculate the ratio of the speeds of these bodies.
The ratio of the speeds of these bodies is 2.06
The kinetic energy of an object is equal to 1/2mv^2.
For the 4.0 kg body, the kinetic energy is 1/2 (4.0 kg)v^2
For the 8.5 kg body, the kinetic energy is 1/2 (8.5 kg)u^2
Given that the kinetic energy of the 4.0 kg body is twice the kinetic energy of the 8.5 kg body, we can set up the following equation:
1/2 (4.0 kg)v^2 = 2 * (1/2 (8.5 kg)u^2)
Simplifying the equation, we have:
2 (4.0 kg)v^2 = (8.5 kg)u^2
Solving for the ratio of the speeds, we get:
v^2/u^2 = (8.5 kg)/(2 (4.0 kg)) = 4.25
Therefore, the ratio of the speeds of the two bodies is equal to the square root of 4.25, which is approximately equal to 2.06.
So, the 4.0 kg body is moving at approximately 2.06 times the speed of the 8.5 kg body.
To know more about kinetic energy click here:
https://brainly.com/question/999862
#SPJ11
what would its landing speed have been in the absence of air resistance? express your answer using two significant figures.
The landing speed of the ball in the absence of air resistance would be 14 m/s.
The landing speed of an object in the absence of air resistance can be calculated by considering the conservation of energy.
The initial energy of the object will be equal to the final energy of the object when it reaches the ground.
A ball falling from a height h with an initial velocity u.
The gravitational potential energy of the ball is given by mgh, where m is the mass of the ball, g is the acceleration due to gravity, and h is the height of the ball.
The kinetic energy of the ball is given by 1/2 mu², where u is the initial velocity of the ball.
At the ground level, the gravitational potential energy of the ball will be zero, and the kinetic energy of the ball will be given by 1/2 mv², where v is the velocity of the ball when it reaches the ground.
mgh + 1/2 mu² = 1/2 mv²
Solving for v, we get:
v = sqrt(2gh + u²)
In the absence of air resistance, the ball will continue to fall with an acceleration of g. Therefore, we can assume that the initial velocity u is equal to zero. Thus, the equation reduces to:
v = sqrt(2gh)
g = 9.8 m/s², we can calculate the landing speed of the ball for a given height h. For example, if the ball is dropped from a height of 10 meters, then the landing speed of the ball will be:
v = sqrt(2gh) = sqrt(2*9.8*10) = 14 m/s
Therefore, the landing speed of the ball in the absence of air resistance would be 14 m/s.
to know more about resistance refer here:
https://brainly.com/question/30799966#
#SPJ11
if a 2000-kg car traveling at 30 m/s hits a wall and comes to a complete stop in 0.03 seconds, how much force was applied to the car?
If a 2000-kg car traveling at 30 m/s hits a wall and comes to a complete stop in 0.03 seconds the force that was applied to the car is 6,000,000 N
The force applied to the car can be calculated using the formula:
Force = (mass x change in velocity) / time
Here, the mass of the car is 2000 kg, the initial velocity is 30 m/s, the final velocity is 0 m/s (since the car comes to a complete stop), and the time taken is 0.03 seconds.
Substituting these values, we get:
Force = (2000 kg x (0 m/s - 30 m/s)) / 0.03 s
Force = -6,000,000 N
The negative sign indicates that the force is acting in the opposite direction to the motion of the car. So, the force applied to the car by the wall is 6,000,000 N.
Learn more about force at
https://brainly.com/question/13191643
#SPJ4
CQ6.07 Given: L = 26 mH (milli H) The inductor current i changes 9.1 A/ms (Amps per milli sec) for a short while. What is the voltage across the inductor during this period? VL = ?? V
The voltage across the inductor during the period when the current changes at 9.1 A/ms with an inductance of 26 mH is 236.6 V.
An inductor is an electrical component that stores energy in a magnetic field when a current passes through it. An inductor is a device that opposes any change in the current flowing through it. The inductor is represented by the symbol L and is measured in henries (H).
The difference in electrical potential between two points in a circuit is known as voltage. The unit of voltage is volts (V).
The voltage across an inductor can be calculated using the formula:
[tex]v = L(di/dt)[/tex]
where v is the voltage, L is the inductance, and [tex]di/dt[/tex] is the rate of change of current.
Substituting the given values, we get:
[tex]v = 26\ mH \times (9.1 \ A/ms)[/tex]
Note that the units for inductance and rate of change of current must be consistent, so we convert the inductance to henries (H) and the rate of change of current to amps per second (A/s):
[tex]v = 0.026\ H \times (9100 \ A/s)[/tex]
[tex]v = 236.6 \ V[/tex]
Therefore, the voltage across the inductor during this period is 236.6 V.
Learn more about inductance:
https://brainly.com/question/30216563
#SPJ11
what must the charge (sign and magnitude) of a particle of mass 1.45 g be for it to remain stationary when placed in a downward-directed electric field of magnitude 700 n/c ?
The charge (sign and magnitude) of a particle of mass 1.45 g must be for it to remain stationary when placed in a downward-directed electric field of magnitude 700 n/c is -1.029x10⁻⁴ C.
The magnitude of the charge must be equal to the magnitude of the electric field (700 n/c).
Therefore, we can write:-mg = qE
where, m = 1.45g = 1.45 x 10⁻³ kg
E = 700 N/cm = 1.45 x 10⁻³ kg x 9.81 m/s²
= 0.01419 N (Weight of the particle)
q = -1.029 x 10⁻⁴ C
To remain stationary when placed in a downward-directed electric field of magnitude 700 n/c, the charge (sign and magnitude) of a particle of mass 1.45 g must be negative.
Learn more about the Charge of a particle here:
https://brainly.com/question/28233928
#SPJ11
what quantity describes the ability of a force to rotate an object? how does it differ from a force? on what quantities does it depend?
The quantity that describes the ability of a force to rotate an object is torque. It differs from a force in that it is a rotational force, not a linear force. Torque depends on the force applied and the distance from the point of application to the pivot point.
Torque is the measure of the ability of a force to cause rotational motion. It is defined as the product of the force and the distance between the point of application of the force and the pivot point or axis of rotation. Unlike a linear force, which produces linear motion, a torque produces rotational motion. The unit of torque is the newton-meter (N·m) in the SI system.
Learn more about pivot point at: https://brainly.com/question/29515099
#SPJ11
suppose you have an atwood machine with two different masses m and m. what are the external forces acting on this system?
The external forces acting on this system are: gravity and the tension in the string.
An Atwood machine is a system consisting of two masses, m, and m, connected by a string that passes over a pulley. In this system, the external forces are gravity and the tension in the string. Gravity pulls both masses downward, while the tension in the string acts in opposite directions on the two masses, pulling the heavier one down and the lighter one up.
The tension in the string is determined by the masses m and m and the acceleration of the system. If m is the heavier mass and m is the lighter mass, the tension in the string will be greater than if both masses had the same weight. This is because the tension must balance the gravitational forces on the two masses. The greater the mass, the greater the gravitational force, and the greater the tension in the string must be to balance it.
The acceleration of the system is determined by the masses, the tension in the string, and the amount of friction in the system. The greater the tension, the greater the acceleration, and the smaller the mass, the greater the acceleration. Friction acts against the acceleration, reducing the net acceleration of the system.
In summary, the external forces acting on an Atwood machine with two different masses m and m are gravity and the tension in the string. The tension in the string is determined by the masses and the acceleration of the system, while the acceleration is determined by the masses, the tension in the string, and the amount of friction in the system.
To know more about gravity refer here:
https://brainly.com/question/14874038#
#SPJ11