what molecule is most consistent with the following? what molecule is most consistent with the following? i ii iii iv v

Answer: 179 grams

Explanation:

In a chemical reaction, the law of conservation of mass applies, meaning that the total mass of the reactants is equal to the total mass of the products. In this case, the reactants are 162 grams of copper and 17 grams of oxygen, and the product is copper (II) oxide. Using the balanced chemical equation 2Cu + O2 -> CuO, we know that 1 copper atom reacts with 1 oxygen molecule to form 1 copper oxide. Therefore, the mass of copper oxide produced is equal to mass of copper plus mass of oxygen, which is 162g + 17g = 179g.

According to the standard reduction potentials Zinc will be react with copper to form a brass alloy will occur.

What is standard reduction?

Standard reduction is a type of oxidation-reduction reaction in which the oxidation number of a molecule or atom decreases. It is achieved by the addition of electrons or the removal of oxygen atoms from the molecule. This process is also known as reduction-oxidation or redox reaction. Standard reduction is commonly used in chemical synthesis and in the production of electricity. It is important to note that the reactant that gains electrons is the reducing agent, while the substance that loses electrons is the oxidizing agent.

Therefore, According to the standard reduction potentials Zinc will be react with copper to form a brass alloy will occur.

To learn more about standard reduction

Here: https://brainly.com/question/13084594

#SPJ1

The delta H (in KJ/mole NaOH) for the solution (9.55g sample of solid NaOH (sodium hydroxide) dissolves in 100g of calorimeter in coffee-cup calorimeter, the temperature rises from 23.6 to 47.4 Celsius.)  process = 31,204 kJ/mol

The specific heat capacity of a material is defined as the amount of heat (J) absorbed per unit mass (kg) when its temperature rises 1 K (or 1 °C), and its units are J/(kg K) or J/(kg °C).

Specific heat of water = 4.18 J/g °C

The total mass = 100 + 9.55 = 109.55 g

To determine the heat, use equation:

Q = mCΔT

Where:

Q = heat energy (Joule)

m = mass (kg)

C = specific heat (J/g°C)

ΔT = change in temp (°C)

Q = (109.55) x (4.18) x (47.4 - 23.6)

= 10,898 Joule

Moles of NaOH: mass / molar mass

= 9.55 / (23 + 16 + 1)

= 0.23

Enthalpy of reaction:

7177 / 0.23 = 31,204 kJ/mol NaOH

So, delta H (in KJ/mole NaOH) for the solution process = 31,204 kJ/mol

The question is incomplete, it should be:

When 9.55g sample of solid NaOH (sodium hydroxide) dissolves in 100g of calorimeter in coffee-cup calorimeter, the temperature rises from 23.6 to 47.4 Celsius. Calculate Delta H (in KJ/mole NaOH) for the solution process.  Assume that the specific heat of the solution is the same as that of pure water.

Learn more about enthalpy here: https://brainly.com/question/29362028

#SPJ4

Epsomite or Epsom salt is one of the minerals in which magnesium sulfate is found in its hydrated form.

Magnesium sulfate heptahydrate, often known as epsomite, is a mineral having the chemical formula MgSO47H2O.

Epsomite often takes the form of vast encrustations, however, the orthorhombic system can occasionally produce acicular or fibrous crystals. It ranges from colourless to white with pink, green, and yellow undertones. The specific gravity is only 1.67 and the Mohs hardness ranges from 2 to 2.5.

It dissolves easily in water. After absorbing water from the air, it changes to hexahydrate, losing one water molecule along the way and adopting a monoclinic shape.

Learn more about Magnesium:

https://brainly.com/question/30333465

#SPJ4

II. Elements in group 7 show a gradual change in physical properties.

III. The position of an element in period 3 is related to the number of electrons in the highest Occupied energy level.

The periodic table is a table that displays each chemical element in each system. These chemical elements have a very large number, with different properties, from one element to another.

The purpose of making the periodic table of elements is to recognize the element names of chemical particles easily through grouping.

The periodic system is also defined as an arrangement that displays various chemical elements based on their atomic number and similar chemical properties.

In grouping the periodic table, the physical and chemical properties of each of these elements have been outlined by chemists in the form of a table of elements.

Learn more about periodic table at https://brainly.com/question/11155928.

#SPJ4

The pH of the monoprotic acid solution is 2.9.

We know that the pH has to do with the amount of the hydrogen ions that we have in the solution expressed as the negative logarithm. Now, we can see that we have the Ka of the acid from the question as 7.1×10^−6.

Now;

Ka = x^2/(0.23 - x)

Then we have;

7.1×10^−6 = x^2/0.23 - x

7.1×10^−6(0.23 - x) = x^2

1.6 * 10^-6 - 7.1×10^−6x = x^2

Hence, we can make the quadratic from;

x^2 + 7.1×10^−6x - 1.6 * 10^-6 = 0

x = 0.00126 M

pH = -log ( 0.00126 M)

= 2.9

Learn more about pH:https://brainly.com/question/15289714

#SPJ1

A chemist employed by an airplane manufacturer investigates new adhesives for the purpose of building airplanes without rivets. she is engaged in applied research.

Every research project begins with a precise explanation of the aim of the investigation, which aids in identifying the research method or strategy used. A researcher can therefore carry out either basic research or applied research.

A non-systematic approach to solving certain difficulties or problems is through applied research. These concerns or problems may affect a person, a group, or the entire society. Because it jumps right to seeking solutions, it is referred to as "non-systematic."

It is frequently referred to as a "scientific process" since it makes use of the existing scientific instruments to identify solutions.

There are three different categories in this research:

Action research, Research and Development, and evaluation research are three types of research.

To know more about applied research from the link

brainly.com/question/28812570

#SPJ4

The percentage abundance of 35Cl is 75.77% and the percentage abundance of 37Cl is 24.23%.

Let's say there are two or more different versions of the same element, each with a unique atomic mass but the same atomic number. Isotopes are various versions of the same element with the same atomic number but differing atomic masses.

The information below is provided to us.

Assuming the proportion abundance of Cl-35 to be x%, the atomic mass of chlorine is 35.4527 u, the atomic mass of Cl-35 is 34.9689 u, and the atomic mass of Cl-37 is 39.9659 u.

Cl-37 has an abundance of (100 - x)%.

Average atomic mass, 35.4527 = [tex]\frac{x×34.9689 u+(100−x)×36.9659 u}{100}[/tex]

or, x= 75.77%.

So, abundance of 37Cl = 100% - 75.77 = 24.23%

Hence, the abundances are 75.77% and 24.23%.

To know more about isotopes from the link

brainly.com/question/14220416

#SPJ4

The volume of a liquid can be directly measured with specialized glassware, typically in units of milliliters (mL) or liters (L).

Define volume of iron?

To learn more about iron refers to:

https://brainly.com/question/30379548

#SPJ4

Option A, Black body radiation is related to photons.

A black body, is described as an ideal object that emits all frequencies of radiation. The spectra generated by this depends only on the temperature and not on the black body's composition. This happens because the black body wants to stay in thermal equilibrium. Black body radiations are explained with the help of following laws : Wien’s displacement law, Planck’s law and Stefan-Boltzmann law. Amongst these, the Planck's law states that energy emission (radiation) is not a continuous process, it takes place in discrete units or quanta of energy, the size of which involves a fundamental physical constant (Planck’s constant). These packets, called photons carry energy = hc/λ , where h = planck's constant, c = speed of light and λ = wavelength of radiation.

To know more about black body radiation, click here: https://brainly.com/question/14202586

#SPJ4

The chemical equation for the given reaction is Cl₂+2KBr→2KCl+Br₂.

When chemical bonds between atoms are made or broken, chemical processes take place. Reactants are the substances that start a chemical reaction; products are the substances that come out of the process. To show the direction of a chemical equation, an arrow is drawn between the reactants and products. However, as we'll see in more detail in the section after this, a chemical equation is not always a "one-way street." Since no atoms are formed or destroyed during a typical chemical equation, equations must be balanced to reflect this principle. This principle is known as the law of conservation of matter.

To learn more about Chemical equation from the given link

https://brainly.com/question/29039149

#SPJ1

The value of n of the formula, Na₂SO₄•nH₂O is 10

To obtain the value of n in the formula, we shall determine the formula of the hydrate. Details below:

Divide by their molar mass

Na₂SO₄ = 1.42 / 142 = 0.01

H₂O = 1.8 / 18 = 0.1

Divide by the smallest

Na₂SO₄ = 0.01 / 0.01 = 1

H₂O = 0.1 / 0.01 = 10

Thus, the formula of the hydrate is Na₂SO₄•10H₂O

Comparing the formula of the hydrate, Na₂SO₄•10H₂O with this Na₂SO₄•nH₂O, we can see that the value of n is 10

Learn more about empirical formula:

https://brainly.com/question/9459553

#SPJ1

The concentration of tubular filtrate by counter current is the mechanism that is depend on all of the given option but except D. Active transport reabsorption of sodium and glucose in the proximal convoluted tubule.

The counter current mechanism depends on the following :

A. The High salt concentration in the medulla.

B. The Water-impermeable walls of the ascending loop of the Henle.

C. The Reabsorption of the sodium and the chloride from the ascending loop of the Henle.

Thus the correct option that counter current mechanism not dependent on is D. Active transport reabsorption of sodium and glucose in the proximal convoluted tubule.

To learn more about reabsorption here

https://brainly.com/question/30160012

#SPJ4

[Co(en)3] [Mn(CN)5I2] is the formula for tris(ethylenediamine)cobalt(III) pentacyanoiodomanganate(II). Tris(ethylenediamine)cobalt(III) pentacyanoiodomanganate(II) is a complex molecule.

containing two metal ions, cobalt and manganese, which are coupled to distinct ligands. The cobalt ion forms a [Co(en)3] unit with three ethylenediamine (en) ligands. The manganese ion forms a [Mn(CN)5I2] unit with five cyanide (CN) ligands and two iodine (I2) ligands. The compound's overall formula is [Co(en)3] [Mn(CN)5I2]. The complex contains a cobalt ion in the +3 oxidation state and a manganese ion in the +2 oxidation state. Because the ethylenediamine ligands are bidentate, they can bind with the metal ion via two distinct nitrogen atoms. Cyanide ligands are bidentate as well, coordinating via the nitrogen atoms. The iodine ligands are not coordinated to each other.

learn more about molecule  here:

https://brainly.com/question/19922822

#SPJ4

Answer: a. C2H2 C 2 H 2 and C6H6 C 6 H 6

Explanation:

The pair with the same ratio will have the same empirical formula. a. C2H2 C 2 H 2 has a 1:1 ratio, and C6H6 C 6 H 6 also has a 1:1 ratio. Therefore, this pair shares the same empirical formula.

The pace at which reactants change into products is known as the rate of a chemical reaction. Several experimental factors, such as the following, have an impact on the pace of a chemical reaction:

. Temperature: As a reaction's temperature rises, the kinetic energy of the reactant molecules rises as well, increasing the possibility of successful collisions between reactant molecules. The reaction's rate rises as a result of this.

. Concentration: Increasing the amount of reactants in a process causes more molecules to collide with one another, which accelerates the reaction.

. Surface area: Increasing a solid reactant's surface area causes more molecules to collide with one another, speeding up the reaction.

. Catalyst: A catalyst is something that speeds up a chemical reaction without becoming eaten by it. By offering an alternative reaction pathway, it lowers the activation energy necessary for the reaction to happen.

. Pressure: Increasing the pressure of the reactants in gas-phase reactions causes more molecules to collide, which accelerates the reaction's pace.

Overall, there are many variables that might affect and complicate the link between the experimental parameters and the rate of a chemical reaction. One or more of these parameters can be altered to raise or reduce the rate of a reaction.

To learn more about rate of a chemical reaction:

https://brainly.com/question/24795637

#SPJ4

A substance maintaining a uniform appearance and composition - homogeneous.

A mixture consisting of visibly different substances or phases - heterogeneous.

A homogenous mixture of two or more components with particles smaller than 1 nm is referred to as a solution. Solutions come in many forms, including soda water, salt and sugar solutions, and others. Every element in a solution appears as a single phase.

A continuous variation of a homogeneous mixture of two or more substances in relative proportions up to what is known as the limit of solubility. Although solutions of gases and solids are possible, the term "solution" is most frequently used to refer to the liquid condition of matter.

Two liquids that will not mix with one another - immiscible

At a given temperature the solvent contains all of the solute it can hold - saturated

At a given temperature the ability of a solvent to dissolve more solute - unsaturated

At a given temperature a solution that contains more solute than can be dissolved by the solvent - supersaturated

To learn more about solution use link below:

brainly.com/question/25326161

#SPJ1

The concentration of particles in a 0.651 M solution of AlCl₃ is 2.06 M.

This can be calculated by multiplying the molarity of the solution (0.651 M) by the van't Hoff factor (3.20). Therefore, 0.651 x 3.20 = 2.06.

What is molarity?

Molarity is a unit of concentration that is defined as the number of moles of a solute per liter of solution. It is usually represented by the symbol M. The calculation of molarity is done by dividing the number of moles of a solute by the total volume of the solution in liters. It is also often used in dilutions, where the concentration of a solution is reduced by adding more solvent. Molarity is a very important concept in chemistry and is used to predict and measure the amount of substances needed in a reaction.

Therefore, The concentration of particles in a 0.651 M solution of AlCl₃ is 2.06 M.

To learn more about molarity

Here: https://brainly.com/question/17138838

#SPJ1

The balanced net ionic equation for an oxidation-reduction reaction between Ag+ (aq) and Ni(s) based on the half-reactions represented above is: d. 2Ag+(aq) + Ni(s) â 2Ag(s) + Ni²+(aq)

The reason is that both half-reactions must be balanced for both electrons and atoms, so the number of electrons lost by the oxidation half-reaction must equal the number of electrons gained by the reduction half-reaction. In this case, the oxidation half-reaction is: Ag+(aq) + e- -> Ag(s) which loses 1 electron. The reduction half-reaction is: Ni(s) -> Ni²+(aq) + 2e- which gains 2 electrons. To balance the number of electrons between the two half-reactions, we need to multiply the oxidation half-reaction by 2, so that it loses 2 electrons. So the balanced net ionic equation is 2 Ag+(aq) + Ni(s) -> 2 Ag(s) + Ni²+(aq).

Learn more about oxidation - reduction here :

https://brainly.com/question/4222605

#SPJ4

According to the standard metric system, the correct figure indicating the right answer in a is 100 cm of baseball, and in b 230 ml of milk in glass and man of weight 75 kg.

There are certain standard units used for the measurement of each parameter. For example, the mass of a person is said in kg. The volume of a liquid is expressed in ml or L. Similarly, the the width of an area is expressed in mm or cm for a small object.

The length of a the ball is expressed in centimeters. Hence, 100 cm is the answer. The volume of milk in the glass is 230 ml of milk  and man of weight 75 kg is correct.

The volume in the table spoon is 15 ml and the weight of paper clip is 50 g. Similarly the width of hand is 100 mm.

Find more on metric system:

https://brainly.com/question/25966695

#SPJ1

The rules for deciding which digits in a measurement are significant are as follows: Rule 1: All nonzero digits in a measurement are significant.

What are measured quantities?

To learn more about quantities refers to:

https://brainly.com/question/15085064

#SPJ4

On adding 50 g sample of iron at 100°C is added to 500 mL of water at 35°C in a perfectly insulated container, then the heat energy which is lost by iron will be equal to the heat energy which is gained by water.

When a particular system is isolated inside an insulated container, then the heat energy is transferred from the sample to the water and also to the container. According to the law of conservation of energy, the heat energy which is lost by the added sample is equal to the heat energy which is gained by the water as well as the container.

When 50g of iron sample at 100°C is added to 500mL water at 35°C in an insulated container, then the heat energy which is lost by the iron sample will be equal to the heat energy gained by the water.

Hence, the correct option is D. The heat energy which is lost by iron will be equal to the heat energy that is gained by water.

To know more about the law of conservation of energy here

https://brainly.com/question/29775341

#SPJ4

The statement is true that acid is a substance that donates protons when dissolved in water and a base is a substance that accepts protons when dissolved in water.

Go through the given link below to know more about acid:-

https://brainly.com/question/25148363

#SPJ4

Answer:

63. What is the atomic number of tritium?

The atomic number of tritium is 1, as it is a isotope of hydrogen, which has an atomic number of 1.

64. How is tritium typically produced?

Tritium is typically produced through nuclear reactions, such as those in a nuclear reactor or during nuclear weapons testing. It can also be produced in small amounts through the interaction of cosmic rays with the Earth's atmosphere.

65. What are some of the applications of tritium?

Tritium has a number of applications, including as a radioactive tracer in medical imaging and research, and as a fuel for nuclear fusion reactions. It can also be used in self-powered lighting devices, such as exit signs and emergency lighting. Additionally, Tritium is used to produce the radioactive isotope Helium-3, which is used in nuclear magnetic resonance imaging (MRI) and in neutron detection.

Considering ATP hydrolysis in erythrocytes, the reactions is far removed from homeostasis; there are more metabolites and fewer heterogeneous catalysts in the cell than would be predicted at equilibrium.

The term "hydrolysis" refers to the breaking of covalent bonding but by addition of sodium and describes the response of an organic compound with water to produce two maybe more new chemicals. The process by which your body separates food into its nutrient components is known as hydrolysis.

A process called hydrolyzed involves the chemical inclusion of water while a molecule is separated into smaller ones. Enzymes that accelerate hydrolysis are present in almost all cells, but the liver has the largest levels of these enzymes.

To know more about hydrolysis visit:

https://brainly.com/question/24213349

#SPJ4

The density of the white crystal is 4.48 g/cm³.

Density is defined as the measure of mass per unit volume of a substance, where the measure of a pure substance is proportional to its mass concentration. Densities are the measure of relative compactness whose definition of this measure can be expressed as mass, m, in a particular volume, v.

ρ = m/V

where, ρ = density, kg/m3, or g/(cm)3

m = mass, in kg or g

V = volume, in m3 or (cm)3

For above given information,

Mass of white crystal = 51.00g

Volume of water = 50.0 mL

Volume of water + white crystal = 61.4 mL

First of all we will calculate the volume of white crystal.

Volume of white crystal= (volume of water + white crystal) - Volume of water

Volume of white crystal= 61.4 mL - 50.0 mL

Volume of white crystal= 11.4 mL

Density of white crystal:

d = m/v

d = 51.00 g / 11.4 mL

d = 4.48 g/cm³ (i.e. 1mL = 1 cm³ )

Thus, the density of the white crystal is 4.48 g/cm³.

Learn more about Density, here:

https://brainly.com/question/29775886

#SPJ1

Difference In electronegativity =3.0-2.1 = 0.9

Difference in electronegativity = 4.0 - 1.0 = 3.0

Difference in electronegativity = 2.5-2.1 = 0.4

Difference in electronegativity = 2.1-1.5 = 0.6

Not all atoms attract electrons with the same force. The amount of "pull" an atom exerts on electrons is called electronegativity. Atoms with high electronegativity – such as fluorine, oxygen and nitrogen − exert a greater attraction for electrons than atoms with low electronegativity.

In a bond, this causes an unequal sharing of electrons between atoms, as the electrons will be attracted towards the atom with the higher electronegativity.

Since electrons have a negative charge, the unequal sharing of electrons in bonds leads to the formation of an electric dipole: the separation of positive and negative electric charges. Because the number of charges separated in the dipole is usually less than the elementary charges, they are called partial charges, denoted as δ+ (delta plus) and δ− (delta minus).

Learn more about polarity at https://brainly.com/question/29217577.

#SPJ4

The heat will remain constant.

Go through the given link below to know more about heatheat:-

https://brainly.com/question/934320

#SPJ4

The following which would not be an application of Stuart Wilkinson's theory as regards marrying the idea of useful robotic capabilities in terms of eating food is a recycling truck that feeds on petroleum and is denoted as option D.

This is referred to as a machine which is able to replicate certain human movements and functions automatically through the use of an external control device.

Since Stuart Wilkinson's theory intends to marry the idea of useful robotic capabilities in terms of eating food then a recycling truck that feeds on petroleum isn't accurate because petroleum isn't a source of food.

Read more about Robot here https://brainly.com/question/27788887

#SPJ1

If BH3 formed the trigonal planar molecule, Boron does not contain a complete octet of electrons.

Boron compounds such as borax (sodium tetraborate, Na2B4O7·10H2O) have been known and used by ancient cultures for thousands of years. However, boron was first partially isolated in 1808 by French chemists Joseph L. Gay-Lussac and L. J. Thénard and separately by Sir Humphry Davy in London. In 1909, the American chemist Ezekiel Weintraub produced 99% pure boron by reducing boron halides with hydrogen.

Nearly a century later, in 2004, Jiuhua Chen and Vladimir L. Solozhenko produced a new form of boron, but were unsure of its structure. Boron is a semi-metallic (metalloid) element and does not occur freely in nature. The abundance of boron in nature is very low, which is around 0.0003% and its minerals are found in the form of ulexite, borax, collemanite, and kernite. The element boron has 2 isotopes, namely boron-10 with an abundance of about 20% and boron-11 with an abundance of about 80%.

Learn more about boron at https://brainly.com/question/9356683.

#SPJ4