Answer:
Sublimation, the dry ice changes to a gas, solid to gas is sublimation
for a second order reaction with an initial concentration of reactant of 64 m, what concentration of the reactant is left after three half lives?
After three half-lives, the concentration of the reactant will be 1/8 of its initial concentration. This means that the remaining concentration of the reactant after three half-lives will be 8 m.
A second order reaction is one that has a rate proportional to the product of the concentration of two reactants or the square of the concentration of one reactant. In this case, the rate of the reaction is given by the equation:
r = k[A]²
The half-life of a reaction is the amount of time it takes for the concentration of the reactant to decrease by half. The half-life of a second-order reaction is given by the equation:
t½ = 1 / (k[A]₀)
Where k is the rate constant, [A]₀ is the initial concentration of the reactant, and t½ is the half-life of the reaction. After one half-life, the concentration of the reactant will be [A] = [A]₀ / 2
After two half-lives, the concentration of the reactant will be [A] = [A]₀ / 4
After three half-lives, the concentration of the reactant will be [A] = [A]₀ / 8
Given that the initial concentration of the reactant is 64 M, the concentration of the reactant after three half-lives is:
[A] = [A]₀ / 8[A] = 64 / 8[A] = 8 M
Therefore, the concentration of the reactant that is left after three half-lives is 8 M.
For more such questions on half-life , Visit:
https://brainly.com/question/23191712
#SPJ11
4. what is conjugation? (cite any sources) does it make sense that one dye absorbs light of a higher or lower wavelength based on the degree of conjugation? (for a complete answer, you should correlate the approximate wavelength of light absorbed by your synthetic dyes with the conjugation present in each of their chemical structures.)
Conjugation is the process of connecting multiple double bonds or lone pairs of electrons in a molecule or chemical structure.
Conjugation affects the absorption of light in a dye. Dyes with conjugated structures will absorb light of lower wavelength than those without conjugated structures. For example, a synthetic dye with two double bonds will absorb light of lower wavelength than one with just one double bond. The degree of conjugation in a chemical structure will affect the amount of light absorbed and the wavelength of the light that is absorbed.
The approximate wavelength of light absorbed by synthetic dyes is related to the degree of conjugation in the chemical structure. A dye with more conjugated double bonds or lone pairs will absorb light of a lower wavelength than one with fewer conjugated double bonds or lone pairs. For example, a dye with four double bonds will absorb light of a lower wavelength than one with three double bonds. The longer the conjugation, the lower the wavelength of light absorbed.
In conclusion, the degree of conjugation present in a chemical structure affects the amount and wavelength of light absorbed by a dye. The longer the conjugation, the lower the wavelength of light absorbed.
To know more about conjugation click here:
https://brainly.com/question/30907314
#SPJ11
What is the nature of the bond indicated?
A. Nonpolar Covalent
B. Polar Covalent
C. Ionic
D. Metallic
The nature of the bond indicated in the diagram above would be the nonpolar covalent bond. That is option A.
What is a Nonpolar Covalent bond?A Nonpolar Covalent bond is defined as the type of chemical bond that is formed when electrons are shared equally between two atoms.
While polar covalent bond is defined as the type of chemical bond that is formed when electrons are shared unequally between two atoms.
For example, molecular oxygen (O2) is nonpolar because the electrons will be equally distributed between the two oxygen atoms.
Therefore the type of bond that is indicated in the diagram above is a nonpolar covalent bond.
Learn more about covalent bond here:
https://brainly.com/question/29630777
#SPJ1
What aldehyde is needed to prepare the carboxylic acid by an oxidation reaction?
Answer:
The oxidation of an aldehyde can be achieved using a variety of oxidizing agents, including potassium permanganate (KMnO4), chromium trioxide (CrO3), and silver oxide (Ag2O). The specific oxidizing agent used will depend on the conditions and desired yield.
For example, if we want to prepare acetic acid, we can oxidize ethanol (an alcohol) using a strong oxidizing agent like potassium permanganate. Alternatively, we can oxidize acetaldehyde (an aldehyde) using a milder oxidizing agent like silver oxide.
Therefore, any aldehyde can be used to prepare a carboxylic acid by oxidation, but the specific oxidizing agent and reaction conditions may vary depending on the aldehyde and desired yield.
The aldehyde that is need for the preparation of the acid is CH3(CH2)8CH(Cl)CHO
How do you prepare an acid from an aldehyde?It is not possible to directly prepare an acid from an aldehyde as an aldehyde is already an oxidized form of a primary alcohol, which can be further oxidized to form a carboxylic acid.
Aldehydes can be oxidized to carboxylic acids using strong oxidizing agents such as potassium permanganate (KMnO4) or chromic acid (H2CrO4). The reaction conditions need to be carefully controlled to avoid over-oxidation of the aldehyde to carbon dioxide.
Learn more about aldehyde:https://brainly.com/question/30665943
#SPJ1
the student then prepares a solution using four pellets of naoh dissolved to 100.00 ml in a volumetric flask. the student slowly adds this to the khp solution to perform a titration. it requires 22.50 ml of the naoh solution to reach the endpoint. what is the molarity of the naoh solution based on this titration?
The volume of NaOH solution used in the titration is 22.50 mL or 0.0225 L. The molarity of the NaOH solution is 0.210 mol/L.
To determine the molarity of the NaOH solution, we can use the balanced chemical equation for the reaction between NaOH and KHP:
NaOH + KHP → NaKP + H2O
From the equation, we can see that one mole of NaOH reacts with one mole of KHP. Therefore, the number of moles of NaOH used in the titration can be calculated by:
moles NaOH = molarity of NaOH solution × volume of NaOH solution used (in liters)
The volume of NaOH solution used in the titration is 22.50 mL or 0.0225 L.
To calculate the molarity of the NaOH solution, we need to determine the number of moles of NaOH used in the titration. From the balanced equation, we can see that one mole of KHP reacts with one mole of NaOH. The mass of KHP used in the titration is 0.969 g, which corresponds to the number of moles of KHP used:
moles KHP = mass of KHP / molar mass of KHP
= 0.969 g / 204.22 g/mol
= 0.004738 mol
Since the stoichiometry of the reaction is 1:1, the number of moles of NaOH used in the titration is also 0.004738 mol. Substituting these values into the above equation, we get:
0.004738 mol = molarity of NaOH solution × 0.0225 L
Solving for the molarity of the NaOH solution, we get:
molarity of NaOH solution = 0.004738 mol / 0.0225 L
= 0.210 mol/L
To learn more about molarity
https://brainly.com/question/8732513
#SPJ4
How much faster will lithium gas diffuse than potassium has
Lithium gas would diffuse approximately 3.08 times faster than potassium gas, assuming that the temperature and pressure are constant
What is diffusion ?
Diffusion is a physical process in which particles of a substance move from an area of high concentration to an area of low concentration. It is a fundamental process in nature that plays a crucial role in various biological, chemical, and physical phenomena. Diffusion occurs due to the random movement of particles, which causes them to spread out until they reach an equilibrium state. This process is driven by the tendency of particles to move from regions of high energy to regions of lower energy. Diffusion is affected by several factors, such as the temperature, pressure, and molecular weight of the substance. It is an essential mechanism for transport of nutrients, gases, and other molecules across cell membranes, as well as in many industrial and environmental applications.
The rate of diffusion of a gas is dependent on several factors such as the temperature, pressure, and molecular weight of the gas. Assuming that the temperature and pressure are constant, the rate of diffusion of a gas is inversely proportional to the square root of its molecular weight.
The molecular weight of lithium is 6.94 g/mol while that of potassium is 39.1 g/mol. Therefore, the square root of the ratio of their molecular weights would be the factor by which lithium gas diffuses faster than potassium gas.
The square root of the ratio of their molecular weights is:
√(39.1/6.94) = 3.08
Therefore, lithium gas would diffuse approximately 3.08 times faster than potassium gas, assuming that the temperature and pressure are constant.
To know more about Diffusion visit :-
https://brainly.com/question/94094
#SPJ1
How many chlorine atoms are there in 4 molecules of HCl?
Answer: Hydrogen chloride is a diatomic molecule, consisting of a hydrogen atom H and a chlorine atom Cl connected by a polar covalent bond.
the given carboxylic acid is reduced via reaction with excess lithium aluminum deuteride. assume that the appropriate acidic workup is performed following this reduction. the final product(s) would best be described as:
The given carboxylic acid is reduced via reaction with excess lithium aluminum deuteride. The appropriate acidic workup is performed following this reduction. The final product(s) would best be described as an alcohol.
Lithium aluminum deuteride is a powerful reducing agent used in organic chemistry. Lithium aluminum deuteride is an odorless, white crystalline powder that is soluble in tetrahydrofuran (THF) and diethyl ether (Et2O). It is often utilized as a source of deuterium. When heated, it emits hydrogen and deuterium. Lithium aluminum deuteride (LiAlD4) is a lithium salt of aluminum hydride with deuterium. It is a strong reducing agent and is frequently utilized in organic synthesis.
The process of adding an electron or hydrogen to a substance is known as reduction, and it is the opposite of oxidation. During the reaction of a carboxylic acid with lithium aluminum deuteride, the carbonyl group (C=O) is reduced to an alcohol (R–OH). Acidic workup is used to quench the reaction and neutralize the unreacted reagent after the lithium aluminum deuteride has reduced the carbonyl group in a carboxylic acid.
Carboxylic acids are a class of organic compounds with a carboxyl functional group that consists of a carbonyl group and a hydroxyl group. Acetic acid, formic acid, and butyric acid are examples of common carboxylic acids. The formula R–COOH is used to represent them. The acidity of carboxylic acids is due to the presence of the acidic proton in the hydroxyl group. The hydrogen ion, H+, is generated when the proton is dissociated.
Learn more about reduction at:
https://brainly.com/question/30451902
#SPJ11
prior knowledge questions (do these before using the gizmo.) what important gas do we take in when we breathe?
Answer: The important gas that we inhale when we breathe is oxygen (O2).
It is necessary for the process of respiration. Respiration is a vital process that takes place in all living cells, including human cells. In this process, glucose (sugar) and oxygen are converted into energy (ATP), carbon dioxide (CO2), and water (H2O).
During the process of inhalation, the air enters the body through the mouth and nose. Afterward, it moves down the trachea and then into the lungs. Once inside the lungs, oxygen molecules pass through the thin walls of the capillaries and into the bloodstream, where it is transported to the rest of the body. Oxygen is essential for the proper functioning of the body.
It is used by the cells to produce energy, which is used to power various biological processes. Without oxygen, our cells would not be able to function, and we would die.
Learn more about oxygen here:
https://brainly.com/question/13905823#
#SPJ11
ethyl benzene is treated with (i) br2 and febr3 and (ii) br2 and light or heat separately. do you think the products will be same? justify your answer.
No, the products obtained from the reaction of ethylbenzene with [tex]Br_2[/tex] and [tex]FeBr_3[/tex] in the presence of light or heat will be different from the products obtained from the reaction of ethylbenzene with [tex]Br_2[/tex] / light or heat.
In the first reaction, [tex]Br_2[/tex] and [tex]FeBr_3[/tex] act as a source of electrophilic bromine, which attacks the aromatic ring of ethylbenzene, leading to the formation of 1-bromoethylbenzene. The mechanism for this reaction is an electrophilic aromatic substitution, where the electrophilic [tex]Br^+[/tex] ion is generated in situ by the reaction of [tex]Br_2[/tex] with [tex]FeBr_3[/tex].
In the second reaction, [tex]Br_2[/tex] acts as a source of free radical bromine, which undergoes a free radical substitution reaction with ethylbenzene, leading to the formation of 1,2-dibromoethylbenzene. This reaction proceeds through a free radical mechanism, where the [tex]Br_2[/tex] molecule is split into two free radicals by the action of light or heat.
Therefore, the products obtained from the two reactions will be different. In the first reaction, 1-bromoethylbenzene will be formed, while in the second reaction, 1,2-dibromoethylbenzene will be formed.
To learn more about Electrophilic aromatic substitution refer to the link: https://brainly.com/question/14908357
#SPJ11
consider the compounds cl2, hcl, f2, naf, and hf. which compound has a boiling point closest to that of argon? explain.
The compound that has a boiling point closest to that of Argon is HF. This is because HF has the strongest intermolecular forces (hydrogen bonding) among the given compounds.
The boiling point of a compound depends on the strength of the intermolecular forces that exist between the molecules. The stronger the intermolecular forces, the higher the boiling point.
The weaker the intermolecular forces, the lower the boiling point. The boiling point of Argon is -186°C. Out of the given compounds, the boiling point of HF is the closest to the boiling point of Argon.
The boiling point of HF is -83.8°C. This is because HF has hydrogen bonding which is the strongest intermolecular force among the given compounds. The other compounds such as Cl2, F2, HCl, and NaF, have weaker intermolecular forces than HF. Therefore, they have a lower boiling point than HF.
Learn more about HF here:
https://brainly.com/question/14581360#
#SPJ11
What is one way that the layers of the atmosphere help to maintain life on Earth?
One way that the layers of the atmosphere help to maintain life on Earth is by absorbing and scattering harmful solar radiation, such as ultraviolet (UV) radiation.
The ozone layer, which is located in the stratosphere layer of the atmosphere, absorbs most of the Sun's harmful UV radiation, preventing it from reaching the Earth's surface where it can cause DNA damage and skin cancer. Additionally, the atmosphere helps regulate the Earth's temperature by trapping heat from the Sun through the greenhouse effect, which is essential for maintaining a stable and habitable climate. The atmosphere also contains oxygen, which is necessary for the survival of many living organisms.
To know more about scattering click here:
brainly.com/question/3292565
#SPJ4
citric acid contains 37.51% c, 4.20% h, and 58.29% o by mass. what is the empirical formula of this compound?
The empirical formula of the given compound can be determined as follows the CHOS or C3H4O3.
According to the given data, the compound citric acid contains 37.51% C, 4.20% H, and 58.29% O by mass. So, let's assume that we have 100 g of citric acid, and then, we can find the masses of each element present in it: Mass of carbon = 37.51 gMass of hydrogen = 4.20 g. Mass of oxygen = 58.29 g.
Next, we need to convert the masses into the number of moles using the molar masses of the elements. The molar mass of carbon = 12.01 g/mol, Number of moles of carbon = 37.51 g / 12.01 g/mol = 3.124 molMolar mass of hydrogen = 1.01 g/molNumber of moles of hydrogen = 4.20 g / 1.01 g/mol = 4.158 molMolar mass of oxygen = 16.00 g/molNumber of moles of oxygen = 58.29 g / 16.00 g/mol = 3.643 follow, we need to find the simplest whole-number ratio of these moles by dividing them by the smallest number of moles, which is 3.124 mol: Carbon = 3.124 mol / 3.124 mol = 1Hydrogen = 4.158 mol / 3.124 mol = 1.33 ≈ 1Oxygen = 3.643 mol / 3.124 mol = 1.17 ≈ 1So, the empirical formula of citric acid is CHOS or C3H4O3.
Read more about carbon:
https://brainly.com/question/19083306
#SPJ11
write the equilibrium equation established in a saturated potassium chloride, kcl, solution. equilibrium reaction:
The equilibrium equation for the dissolution of potassium chloride (KCl) in water can be represented as:
KCl(s) ⇌ K+(aq) + Cl-(aq)
What is Equilibrium?
In chemistry, equilibrium refers to the state of a chemical reaction where the concentrations of reactants and products no longer change with time. At this stage, the forward and reverse reactions occur at the same rate, resulting in no net change in the concentrations of reactants and products. It is denoted by a double arrow (⇌) between the reactants and products in a chemical equation. The equilibrium point is reached when the rate of the forward reaction equals the rate of the reverse reaction. The equilibrium constant, Keq, is a quantitative measure of the equilibrium concentration of reactants and products.
In this equation, KCl is the solid salt, and the arrow indicates the reversible reaction between the solid and its constituent ions in the aqueous solution. The dissociation of KCl in water results in the formation of potassium ions (K+) and chloride ions (Cl-) in the solution. When the rate of the forward reaction is equal to the rate of the reverse reaction, the solution is said to be in a state of dynamic equilibrium. In a saturated solution of KCl, the concentration of the dissolved ions is at its maximum value at equilibrium, and the undissolved solid salt is in equilibrium with its dissolved ions.
Learn more about Equilibrium from given link
https://brainly.com/question/517289
#SPJ1
it is fine to enter an area where there is a chemical spill as long as you are very careful. true or false?
The statement "it is fine to enter an area where there is a chemical spill as long as you are very careful" is False. because A chemical spill refers to the uncontrolled release of one or more hazardous substances.
A chemical spill refers to the uncontrolled release of one or more hazardous substances, which can include liquids, gases, or solids, which might pose a significant threat to the environment and human health. The person responsible for a chemical spill is responsible for managing, containing, and cleaning up the hazardous material to prevent environmental or public health damage.
Following a chemical spill, there is a protocol to be followed to guarantee that no harmful substances have been released into the environment that may cause harm to the public. The presence of toxic chemicals in a confined area poses a significant threat to human health, making it hazardous to enter that location. Even if the spill is small, entering an area where a chemical spill has occurred is hazardous. The contamination may disperse through the air, and you may inhale it or the substance may adhere to your clothing and skin, putting you at risk. You should not go near a chemical spill if you are not wearing appropriate protective gear. This is because it is not advisable to enter an area where there is a chemical spill.
For more such questions on chemical spill , Visit:
https://brainly.com/question/30256645
#SPJ11
When Pt metal is used as a catalyst for the previous reaction, we see that the mechanism changes and the reaction is much faster. The activation energy is found to be 98.4 kJ mol-1 with the catalyst at room temperature. How much would you have to raise the temperature to get the catalyzed reaction to run 100 times faster than it does at room temperature with the catalyst? Please answer in °C.
The temperature should be raised by 28.15°C to run 100 times faster than it does at room temperature with the catalyst.
How to find temperature of a catalytic reaction?To determine the temperature increase needed to make the catalyzed reaction run 100 times faster, we can use the Arrhenius equation:
[tex]k_{2}[/tex]/[tex]k_{1}[/tex] = e^(-Ea/R * (1/[tex]T_{2}[/tex] - 1/[tex]T_{1}[/tex])
Where [tex]k_{1}[/tex] and [tex]k_{2}[/tex] are the rate constants at temperatures [tex]T_{1}[/tex] and [tex]T_{2}[/tex], Ea is the activation energy (98.4 kJ mol-1), and R is the gas constant (8.314 J [tex]K^{-1}[/tex] [tex]mol^{-1}[/tex]).
Since we want the reaction to be 100 times faster, k2/k1 = 100. Now we can rearrange the equation and solve for [tex]T_{2}[/tex]:
1/[tex]T_{2}[/tex] - 1/[tex]T_{1}[/tex] = -R * ln(100)/Ea
Assuming room temperature ([tex]T_{1}[/tex]) is 298 K (25°C), we can plug in the values:
1/[tex]T_{2}[/tex] - 1/298 = -8.314 * ln(100)/98,400
1/[tex]T_{2}[/tex] = 1/298 + (8.314 * ln(100)/98,400)
[tex]T_{2}[/tex] = 1 / (1/298 + (8.314 * ln(100)/98,400))
Now, calculate the value of [tex]T_{2}[/tex]:
[tex]T_{2}[/tex] ≈ 326.3 K
To convert [tex]T_{2}[/tex] to °C, subtract 273.15:
[tex]T_{2}[/tex] = 326.3 - 273.15 ≈ 53.15°C
Therefore, you would need to raise the temperature by approximately 28.15°C (53.15 - 25) to make the catalyzed reaction run 100 times faster.
To know more about Arrhenius Equation:
https://brainly.com/question/16994409
#SPJ11
assuming ideal behavior, how many liters hcl gas are required to make concentrated hydrochloric acid (11.6 mol/l) at 25oc and 1 atm pressure?
520.67 liters of HCl gas are required to make concentrated hydrochloric acid (11.6 mol/L) at 25°C and 1 atm pressure. while assuming ideal behavior.
To make concentrated hydrochloric acid (11.6 mol/L) at 25°C and 1 atm pressure, the volume of HCl gas needed is 520.67 L.
Assuming ideal behavior,
Molarity (M) = number of moles of solute/volume of solution in liters (L)
Given:
Molarity (M) = 11.6 mol/L
Volume of solution (V) = ?
Temperature (T) = 25°C
Pressure (P) = 1 atm
We can use the ideal gas law to find the volume of HCl gas required to make 1 L of concentrated HCl. Then, we can use this value to find the volume of HCl gas required to make a certain volume of concentrated HCl. The ideal gas law is given as:
PV = nRT
where: P is pressure, V is volume of the gas, n is the number of moles of gas, R is the gas constant, T is the temperature. We can rearrange the ideal gas law to solve for volume:
V = nRT/PAt
standard temperature and pressure (STP), 1 mole of an ideal gas occupies 22.4 L.
Therefore, the number of moles of HCl gas required to make 1 L of concentrated HCl is given as:
11.6 mol/L × 1 L = 11.6 moles
We can substitute these values into the ideal gas law equation and solve for the volume of HCl gas required to make 1 L of concentrated HCl:
V = nRT/PV = (11.6 mol) × (0.08206 L·atm/K·mol) × (298 K)/(1 atm)V
= 260.51 L
However, we are interested in finding the volume of HCl gas required to make a certain volume of concentrated HCl. We can use the following conversion factor to find the volume of HCl gas required:
1 L concentrated HCl = 260.51 L HCl gas
We can use dimensional analysis to solve for the volume of HCl gas required to make 1 L of concentrated HCl:
11.6 mol/L × 1 L concentrated HCl × (260.51 L HCl gas/1 L concentrated HCl) = 3020.37 L HCl gas
However, this calculation gives the volume of HCl gas required to make 1 L of concentrated HCl.
We are interested in finding the volume of HCl gas required to make a certain amount of concentrated HCl.
We can use the following formula to solve for the volume of HCl gas required to make a certain amount of concentrated HCl:
V2 = V1 × (M1/M2)
where:V1 is the volume of concentrated HCl needed
M1 is the molarity of concentrated HCl
M2 is the molarity of the HCl gas
V2 is the volume of HCl gas needed
We can substitute the given values into the formula and solve for
V2:V2 = (1 L) × (11.6 mol/L)/(0.08206 L·atm/K·mol × 298 K)V2
= 520.67 L
Therefore, 520.67 liters of HCl gas are required to make concentrated hydrochloric acid (11.6 mol/L) at 25°C and 1 atm pressure.
For more such questions on ideal behavior , Visit:
https://brainly.com/question/28302575
#SPJ11
a piece of metal with a mass of 31.5g is added to a graduated cylinder to calculate the volume. the water is initially at the 51 mark, and it rises to the 78 mark after the metal is added. what is the density of the metal?
The density of the metal is 1.167 g/ml.
The density of the metal can be calculated using the formula for density, ρ:
ρ = m /v
where ρ is the density, m is the mass, and v is the volume.
In this case, the mass of the metal is 31.5g and the volume can be determined by subtracting the initial volume (51mL) from the final volume (78mL) of water in the graduated cylinder. Thus, the volume of the metal is 27mL.
Using the formula, the density of the metal is then:
ρ = 31.5 g / 27mL
ρ = 1.167 g/ml
This means that 1 mL of the metal has a mass of 1.167g. Density is an important property of materials, as it affects other properties such as buoyancy. Generally, materials with a higher density will sink in a liquid, while those with a lower density will float.
Learn more about density here: https://brainly.com/question/1354972.
#SPJ11
a mixture of three gases has a total pressure of 1,380 mmhg at 298 k. the mixture is analyzed and is found to contain 1.27 mol co2, 3.04 mol co, and 1.50 mol ar. what is the partial pressure of ar? multiple choice 0.258 atm 301 mmhg 356 mmhg 5,345 mmhg 8,020 mmhg
The partial pressure of Ar is 0.219 * 1,380 mmHg = 301 mmHg.
The partial pressure of a gas in a mixture is equal to the mole fraction of that gas times the total pressure of the mixture.
The mole fraction of Ar in this mixture is 1.50/6.81 = 0.219. Thus, the partial pressure of Ar is 0.219 * 1,380 mmHg = 301 mmHg.
The ideal gas law states that the pressure of a gas is directly proportional to its number of moles and inversely proportional to its volume.
This law is expressed in the equation PV = nRT, where P is the pressure, V is the volume, n is the number of moles, R is the ideal gas constant, and T is the temperature.
In a mixture of gases, each gas behaves independently according to the ideal gas law. Thus, the total pressure of the mixture is the sum of the partial pressures of each gas.
The partial pressure of a gas is equal to its mole fraction times the total pressure. The mole fraction of a gas is the number of moles of that gas divided by the total number of moles of all gases in the mixture.
In the example provided, the total pressure of the mixture is 1,380 mmHg, the number of moles of CO2 is 1.27, the number of moles of CO is 3.04, and the number of moles of Ar is 1.50.
The total number of moles of all gases in the mixture is 1.27 + 3.04 + 1.50 = 6.81. The mole fraction of Ar is 1.50/6.81 = 0.219. Thus, the partial pressure of Ar is 0.219 * 1,380 mmHg = 301 mmHg.
To know more about partial pressure refer here:
https://brainly.com/question/13199169#
#SPJ11
A biochemist wanted to adjust the of of a buffer solution composed of ( ) and , by adding moles of. (assume the volume of the solution is not affected by this addition. ) determine the of the resulting solution:
The pH value of the resulting solution assume the volume of the solution is not affected by this addition is 3.283.
The pH scale determines how acidic or basic water is. The range is 0 to 14, with 7 representing neutrality. Acidity is indicated by pH values below 7, whereas baseness is shown by pH values above 7. In reality, pH is a measurement of the proportion of free hydrogen and hydroxyl ions in water.
In this Question, HF is a Weak Acid and RbF is a weak Base - HNO3 is a strong acid.
HF reaction in aqueous medium
HF + H2O --------- H3O+ + F -
RbF + H2O ---- Rb+ + F -
pH (Original) = pKa + log ( [salt ] / [Acid] )
We donot need to calculate pH original -which is for the original solution before adding the strong acid.
HF is a weak acid - so in a buffer solution its dissociation is negligible - so it does not affect the H+ ion concentration much.
When a 0.012 mol of HNO3 is added to the buffer solution , it dissociates in H+ and NO-3 .
H+ ions dissociated from the Acid react with F - and produce HF . As a result the acid concentration will increase to the extent of 0.012 mol and the salt concentration reduces by the same extent - 0.012 mol.
So the formula for New pH changes to
pH (New) = pKa + log ( [salt ] - 0.012 mol / [Acid] + 0.012 mol)
Here , 0.012 mol are added to 281 mL solution,
Concentration of HNO3, M = number of moles / Vol in litres
= 0.012 mol / 281 mL
= 0.012 mol / 281 / 1000
= [0.012 mol x 1000] / 281 L = 0.043 M
As pKa = -log(Ka) ,
Given [salt ] = 0.480 M , [Acid] = 0.318 M
= - log(Ka) + log [ (0.480 M - 0.043 M) / (0.318 M + 0.043 M) ]
= - log (6.31 x 10-4 ) + log ( 0.437 / 0.361)
pH (New) = 3.20 + 0.083 = 3.283.
Learn more about pH value:
https://brainly.com/question/10603602
#SPJ4
Complete question:
A biochemist wanted to adjust the pH of 281 mL of a buffer solution composed of 0.318 M HF and 0.480 M RbF (K, = 6.31e - 04) by adding 0.012 moles of HNO3. Determine the pH of the resulting solution: pH number (rtol=0.02, atol=1e-08)
write the balanced chemical equation for the gas-phase production of ammonia from elemental nitrogen and hydrogen
The balanced chemical equation for the gas-phase production of ammonia from elemental nitrogen and hydrogen is:
N2 + 3H2 → 2NH3
This equation represents the reaction of nitrogen molecules, N2, with hydrogen molecules, H2, to form ammonia molecules, NH3. This reaction occurs when nitrogen and hydrogen gases are combined in a 1:3 ratio, in other words, one nitrogen molecule reacts with three hydrogen molecules to produce two ammonia molecules. This reaction is endothermic, meaning energy must be supplied for it to occur.
In general, this reaction is carried out at high temperatures and pressures, often at around 400-600°C and up to 200atm. A catalyst is usually also used, usually iron, to speed up the reaction. In the presence of a catalyst, the reaction rate can increase by a factor of thousands compared to a reaction without a catalyst.
Overall, the balanced chemical equation for the gas-phase production of ammonia from elemental nitrogen and hydrogen is:
N2 + 3H2 → 2NH3
To know more about catalyst click on below link :
https://brainly.com/question/24430084#
#SPJ11
76.33 grams of NaCl were collected after experiment. How many moles were
produced?
76.33 grams of NaCl were collected after experiment 1.306 mol were
produced.
What is mole formula?Every material has a molecular weight of 6.023 x 10²³. It may be used to quantify the chemical reaction's byproducts. The symbol mol is used to identify the unit. The molecular formula is written out as follows.
Mass of material / mass of one mole equals the number of moles.
We need to know the molar mass of NaCl in order to compute the number of moles of NaCl created.
The atomic weights of sodium (Na) and chlorine together make up the molar mass of sodium chloride (Cl). Na has an atomic mass of 22.99 g/mol, while Cl has an atomic mass of 35.45 g/mol. As a result, NaCl's molar mass is:
Molar mass of NaCl
= (1 x atomic mass of Na) + (1 x atomic mass of Cl)
= (1 × 35.45 g/mol plus 1 x 22.99 g/mol)
= 58.44 g/mol
The mass of gathered NaCl may now be converted into moles using the molar mass:
Mass of NaCl divided by its molar mass yields moles of NaCl.
moles of NaCl = 76.33 g / 58.44 g/mol
moles of NaCl = 1.306 mol
As a result, the experiment generated 1.306 moles of NaCl.
To know more about Moles visit:
https://brainly.com/question/21323029
#SPJ1
which one of the following amino acids r groups (a.k.a. side chain) is most likely to participate in hydrogen bonding with water? group of answer choices asparagine alanine leucine phenylalanine valine
The amino acid most likely to participate in hydrogen bonding with water is Asparagine.
Asparagine has an amide group (–CONH2) as its side chain, which is polar and can form hydrogen bonds with water.
Hydrogen bonds are a type of intermolecular force that occurs when a hydrogen atom of one molecule is attracted to an electronegative atom (usually oxygen or nitrogen) of another molecule.
In water, these hydrogen bonds help to stabilize the molecules and increase its boiling point.
The other amino acid side chains are not likely to form hydrogen bonds with water. Alanine has a methyl group (–CH3), which is non-polar and not able to form hydrogen bonds.
Leucine and valine both have an isopropyl group (–CH(CH3)2), which is also non-polar. Finally, Phenylalanine has a phenyl group (–C6H5), which is slightly polar, but not to the same extent as the amide group of Asparagine.
In conclusion, Asparagine is the amino acid side chain most likely to form hydrogen bonds with water. The other amino acid side chains are not able to form hydrogen bonds due to their non-polar nature.
Hydrogen bonds between Asparagine and water help to stabilize the molecules and increase its boiling point.
to know more about asparagine refer here:
https://brainly.com/question/30714122#
#SPJ11
How many moles are in 3.5 moles of FeF3
We just use molar mass for FeF3 (129.9 g/mol) to calculate the number moles in 3.5grammes of FeF3. Hence, just 3.5 x 129.9 = 4546.5 moles of FeF3 need to be multiplied.
Describe the Mass.An object's mass is determined by how much matter it has. Something that has more substance will weigh heavier overall. For instance, because an elephant contains more stuff than a mouse does, it has a heavier mass.
55.8+3⋅19=116 g/mole24 g116 g/mol=0.207 moles of FeF3
0.207 moles×6.022×23molecules/mole=1.2×1023molecules
How is mass measured?A thing's mass is how much matter it contains. Using a balance, scientists frequently determine mass. A beam balance or perhaps an electronic balance can be used to measure the mass of solids directly. Measure a liquid's volume, then use the density table to determine the liquid's mass.
To know more about mass visit:
https://brainly.com/question/15959704
#SPJ1
a vessel contains 112 1 2 l of milk. john drinks 14 1 4 l of milk; joe drinks 12 1 2 l of milk. how much of milk is left in the vessel?
There is 73 3/4 liters of milk left in the vessel.
John drank 14 1/4 liters of milk and Joe drank 12 1/2 liters of milk. This means that a total of 26 3/4 liters of milk was consumed from the vessel. 112 1/2 liters of milk was the total amount of milk in the vessel, so if we subtract the 26 3/4 liters that was consumed from the vessel, we can calculate the remaining amount of milk left in the vessel.
Calculate the total amount of milk that was consumed.
John drank 14 1/4 liters of milk and Joe drank 12 1/2 liters of milk. This means that a total of 26 3/4 liters of milk was consumed from the vessel.
Calculate the amount of milk left in the vessel.
The total amount of milk in the vessel was 112 1/2 liters. If we subtract the 26 3/4 liters that was consumed from the vessel, we can calculate the remaining amount of milk left in the vessel: 112 1/2 liters - 26 3/4 liters = 73 3/4 liters.
In this problem, we needed to calculate the amount of milk left in the vessel after two people drank from it. We did this by first calculating the total amount of milk that was consumed (John drank 14 1/4 liters of milk and Joe drank 12 1/2 liters of milk). Then, we calculated the remaining amount of milk left in the vessel by subtracting the amount of milk consumed from the total amount of milk in the vessel (112 1/2 liters - 26 3/4 liters = 73 3/4 liters).
To know more about diluted milk click on below link :
https://brainly.com/question/30203634#
#SPJ11
benzene has bp of 80oc, toluene has bp of 110 oc and xylene has boiling point of 130 oc. the gc of a mixture of these three compounds should show retention times as
Answer: Benzene has a boiling point of 80oC, toluene has a boiling point of 110 oC, and xylene has a boiling point of 130 oC. The GC of a mixture of these three compounds should show retention times as benzene, toluene, xylene.
The GC of a mixture of these three compounds should show retention times as. The correct answer is Option C; benzene, toluene, xylene. The boiling points of the components indicate that they have different volatility.
Therefore, the order of volatility follows the order in which they have been mentioned in the question;
benzene < toluene < xylene
This means that as the boiling point increases, the retention time of each compound in the column also increases. Since the order of volatility is benzene < toluene < xylene, the retention times of the compounds will be as follows; benzene will have the least retention time, followed by toluene and then xylene, with the largest retention time.
Therefore, the GC of a mixture of these three compounds should show retention times as benzene, toluene, and xylene.
Learn more about retention here:
https://brainly.com/question/29709076#
#SPJ11
the volume of a container expands when it is heated from 159k to 456k. what was the original volume if the final volume is 15.5 l
The original volume of the container is 5.40 L.
The given final volume of a container when heated is 15.5 L. The container expands when heated from 159 K to 456 K.
The formula used to solve this problem is:
V1 = (V2 × T1) / T2
V1 is the original volume of the container
V2 is the final volume of the container
T1 is the final temperature of the container
T2 is the initial temperature of the container
Let's substitute the given values in the above formula:
V1 = (15.5 × 159) / 456V1 = 5.40 L
Therefore, the original volume of the container is 5.40 L.
To know more about original volume click here:
https://brainly.com/question/12014506
#SPJ11
which species is diamagnetic? which species is diamagnetic? si s i co3 c o 3 ba2 b a 2 ni3 n i 3
Answer: Out of the given species, the diamagnetic species are: Si, Ba2+ as they have all their electrons paired in their orbitals, so there are no unpaired electrons to get attracted by an external magnetic field.
Explanation:
Diamagnetism and Paramagnetism are two of the types of magnetism that exist in nature. Diamagnetism arises from a material's electrons' orbital motion in conjunction with one another, causing the magnetic field to cancel.
Diamagnetic materials have a weak, negative magnetic susceptibility, and they experience a repulsive force when in a magnetic field.Paramagnetic materials have a positive magnetic susceptibility, and they get weakly magnetized when exposed to a magnetic field.
The paramagnetism in these materials results from the presence of unpaired electrons in their orbitals.
Therefore, out of the given species, the diamagnetic species are: Si, Ba2+ as they have all their electrons paired in their orbitals, so there are no unpaired electrons to get attracted by an external magnetic field.
Learn more about diamagnetism here:
https://brainly.com/question/15462756#
#SPJ11
what term refers to the ability of open systems to fight off deterioration, sustain themselves and grow? a. requisite variety b. network properties c. negative entropy d. modeling techniques
The ability of open systems to fight off deterioration, sustain themselves and grow is Negative Entropy. Correct answer is option C
Negative Entropy is an important concept in thermodynamics and physics, where it is defined as a decrease in the entropy of a system. Entropy is the measure of randomness or disorder in a system, so negative entropy indicates that a system is becoming more organized, or that it is moving away from equilibrium.
This can be seen in the evolution of life, where species become more complex and adaptive over time, as well as in the growth of technology, where innovations allow us to become more efficient and productive. In essence, Negative Entropy is the power that allows open systems to improve and evolve. Therefore Correct answer is option C
Know more about thermodynamics here:
https://brainly.com/question/1368306
#SPJ11
5. based on the tolerance table for volumetric glassware, the volume of a 25 ml volumetric pipet and volumetric flask is understood to be
The volume of a 25 ml volumetric pipet and volumetric flask is understood to be 25.00 mL ± 0.06 mL according to the tolerance table for volumetric glassware.
Explanation: Based on the tolerance table for volumetric glassware, the volume of a 25 ml volumetric pipet and volumetric flask is understood to be±0.03 mL.What is Volumetric Glassware?Volumetric glassware is laboratory equipment that measures precise volumes of liquids. Volumetric glassware is used in a variety of laboratory settings, including analytical chemistry and clinical chemistry. Volumetric glassware is designed to measure liquids accurately, but it is only accurate if it is used correctly.What is the Tolerance Table?A tolerance table is a table of values that specifies the maximum deviation of a specific measuring device from the true value. The tolerance is the range of allowable deviations that are accepted. Tolerance, expressed in terms of volume, is determined by testing and comparing the volume measurements of each piece of volumetric glassware to a reference standard.How is the Tolerance Table for Volumetric Glassware Used?The tolerance table for volumetric glassware is used to determine the allowable variation from the true value of the liquid in the vessel. The tolerance table provides the range of possible values that are considered acceptable. This range is determined by testing the volumetric glassware against a reference standard in a controlled environment. The allowable error for each type of volumetric glassware is specified in the tolerance table. The tolerances are typically expressed in terms of volume in milliliters. For example, a 25 mL volumetric pipet may have a tolerance of ±0.03 mL.
For more such questions on Volumetric flask
https://brainly.com/question/17053656
#SPJ11