What value of x makes this equation true? 7x – 13 = ─2x + 5

The probability that we draw a total of 4 cards is approximately 0.074.

The probability that we draw a total of n cards is a function of n.

the expected number of times we draw a card until we get a heart or a face card is: E(X) = 1/p = 3.25.

To solve this problem, we can use the geometric distribution, which models the number of trials needed to get the first success in a sequence of independent trials.

Since we are drawing a heart or a face card, there are 16 cards (4 face cards and 12 hearts) out of 52 that are successful. Therefore, the probability of success is:

p = 16/52 = 4/13

What is the probability that we draw a total of 4 cards

We want to find the probability that we get the first success on the fourth trial, i.e., we draw three non-successes followed by a success. The probability of this event is:

P(X = 4) = [tex](1 - p)^3 * p = (9/13)^3 * (4/13) = 0.074[/tex]

We want to find the probability that we get the first success on the nth trial, i.e., we draw n-1 non-successes followed by a success. The probability of this event is:

[tex]P(X = n) = (1 - p)^(^n^-^1^) * p[/tex]

The expected value of a geometric distribution is 1/p. Therefore, the expected number of times we draw a card until we get a heart or a face card is:

E(X) = 1/p = 13/4

Learn more about Geometric distribution

brainly.com/question/30393685

#SPJ11

a) The perimeter of the shaded figure is P = 29.9 units

b) The area of the shaded figure is A = 27.14 units²

Given data ,

Let the circumference of the semicircle C = πr

On simplifying , we get

C = π ( 3 ) = 9.42 units

Now , the total number of straight lines is n = 6 with 2 units

So , perimeter of straight lines = 12 units

Each diagonal represents a hypotenuse of an equal-sided triangle with side = 3 units

So the length of each diagonal is 3√2 units

The perimeter of shaded figure P = 9.42 units + 12 units + 2 ( 3√2 units )

P = 29.9 units

b)

The area of the shaded figure is A

Now , the value of A is

A = area of semicircle + area of square + area of triangle

A = ( πr² )/2 + ( 2 )² + 2 ( 1/2 )bh

A = 14.14 + 4 + 9

A = 27.14 units²

Hence , the perimeter and area is solved

To learn more about triangles click :

https://brainly.com/question/16739377

#SPJ1

The complete question is attached below :

Estimate the perimeter and the area of the shaded figure to the nearest tenth.

A shaded composite figure is shown on a grid. The figure is made up of a triangle on the left, a square in the center, and a semicircle on the right.The triangle is a 45, 45, 90 triangle with a hypotenuse of 6 units. The semicircle has a diameter of 6 units. The square has a side length of 2 units. One side of the square is shared with part of the hypotenuse of the triangle, and one side is shared with part of the diameter of the semicircle.

perimeter: about

units

area: about

square units

1,814,400 different 10-letter words can be formed from the given letters.

To determine how many different 10-letter words (real or imaginary) can be formed from the letters T, S, O, Y, M, H, S, F, C, and B, we need to calculate the number of unique permutations.

Since there are 10 letters, with the letter "S" appearing twice, we can use the following formula:

Number of permutations = 10! / (2!)

1. Calculate the factorial of 10 (10!): 10 × 9 × 8 × 7 × 6 × 5 × 4 × 3 × 2 × 1 = 3,628,800
2. Calculate the factorial of 2 (2!): 2 × 1 = 2
3. Divide the factorial of 10 by the factorial of 2: 3,628,800 / 2 = 1,814,400

So, 1,814,400 different 10-letter words can be formed from the given letters.

Learn more about "permutation":

https://brainly.com/question/1216161

#SPJ11

The diagram represents a circle with center O and a radius of 7 yards.

The point A is located on the circumference of the circle. The measure of angle AOB is 30 degrees, and the measure of angle AOC is 60 degrees.

Using the properties of circles, we can conclude that angle BOC measures 90 degrees.

We can also determine that the length of segment AB is 7√3 yards, and the length of segment AC is 7 yards.

Finally, we can conclude that triangle AOB is an equilateral triangle since each angle measures 60 degrees and each side has a length of 7 yards.

The length of the major arc LNM is approximately 7.33π yards.

The general formula for finding the length of a major arc is given the measure of the central angle and the radius of the circle.

The formula for the length of a major arc is:

Length of major arc = (central angle measure / 360°) x (2πr)

where r is the radius of the circle.

Using this formula, and assuming that LNM is a major arc, we can find its length if we know the central angle measure and the radius of the circle.

If m LKM = 60° and the radius of the circle is 7 yards, then the length of the major arc LNM would be:

Length of major arc LNM = (60° / 360°) x (2π x 7 yd)

Length of major arc LNM = (1/6) x (14π yd)

Length of major arc LNM = (7/3)π yd ≈ 7.33π yd

Therefore, the length of the major arc LNM is approximately 7.33π yards.

To learn more about the Length of major arc visit:

brainly.com/question/16662796

The correct question is:

The circle below has center O and its radius is 7 yd. Given that m ∠LKM = 60°, find the length of the major arc LNM.

because y = 5 means there is no slope but you cant define a slope in x = 5 because it means lateral lenght is 0 but you cant divide anything by 0

y = 5 is a function but x = 5 is not a function.

A function has an input and an output.

A function can be one-to-one or onto one.

It simply indicated the relationships between the input and the output.

Example:

f(x) = 2x + 1

f(1) = 2 + 1 = 3

f(2) = 2 x 2 + 1 = 4 + 1 = 5

The outputs of the functions are 3 and 5

The inputs of the function are 1 and 2.

We have,

The equation y = 5 represents a horizontal line that passes through the

y-axis at the point (0,5).

Since every x-value has a unique corresponding y-value of 5, this equation defines a function.

On the other hand,

The equation x = 5 represents a vertical line that passes through the x-axis at the point (5,0).

Since there are infinitely many y-values for the x-coordinate of 5, this equation does not define a function.

For example,

Points (5,2) and (5,-3) both lie on the line x = 5, and they have different

y-values, so there is no unique y-value associated with the x-coordinate of 5.

Thus,

y = 5 is a function but x = 5 is not a function.

Learn more about functions here:

https://brainly.com/question/28533782

#SPJ2

The English statement "the quotient of x and 9 is greater than 27" can be represented mathematically as x/9 > 27.

This inequality indicates that the value of x divided by 9 is greater than 27. In other words, x is a number that is more than 27 times 9.

For example, let's say we want to find all the values of x that satisfy this inequality. We can begin by dividing both sides by 9, which gives us:x > 243 So any value of x that is greater than 243 will satisfy the inequality.

For instance, x could be 300 or 500 or any other number larger than 243. Alternatively, we can subtract 27 from both sides to get: x/9 - 27 > 0 This form shows that the difference between x divided by 9 and 27 is positive.

We can then find the range of x that satisfies this inequality by multiplying both sides by 9: x - 243 > 0 This tells us that any value of x that is greater than 243 will satisfy the inequality.

To learn more about quotient of x visit:

https://brainly.com/question/28669803

#SPJ4

Answer:

1

Step-by-step explanation:

This question is basically asking us to round 0.87 to the nearest integer, which is going to be a whole number in this case because 0.87 is positive. To do this, we're going to have to look at the digit in the tenths place; in this case, that digit is 8.

Is 8 closer to 10 or 0? Well, it's obviously closer to 10. So, we're going to round 0.87 up, bringing us to 1.

If that's confusing or you need more clarification, let me know. :)

The scale of the image , at its widest point, can be found to be 1 cm : 1. 77 feet .

When measured with a ruler, the widest point on the Coahuilaceratops skull in the center of the image would be 3. 5 cm .

Yet, the widest point of the Coahuilaceratops skull is measured to be 6. 2 feet.

The scale is thefore :
3. 5 cm : 6. 2 feet

Simplified, we have :

3. 5 cm / 3. 5  : 6. 2 feet / 3. 5

1 cm : 1. 77 ft

Find out more on scale at https://brainly.com/question/29795245

#SPJ1

According to the given situation, 6 gallons of water weighs 50.04 pounds.

The United States and certain other nations frequently use the gallon as a unit of volume measurement. Although there are other types of gallons, the U.S. gallon, which is equivalent to 128 fluid ounces or 3.785 liters, is the most often used. It is used to calculate the volume of fluids like milk, water, petrol, and other substances. The word gallon is shortened to "gal."

One gallon of water weighs 8.34 pounds. To find the weight of 6 gallons of water, we can multiply the weight of one gallon by 6:

Weight of 6 gallons of water = 6 x 8.34 pounds

On simplifying we get:

Weight of 6 gallons of water = 50.04 pounds

Therefore, 6 gallons of water weighs 50.04 pounds.

To learn more about gallon, refer to:
https://brainly.com/question/1106482

#SPJ4

(a)The logistic differential equation for these data.

dP/dt = 0.0017P(1 - P/5900)

(b) After 50 years, we would need to repeat this process 50 times to get an estimate of the population.

(c) P(t) = 6900/(1 + 5.882[tex]e^(-0.0017t))[/tex]

(d) The population after 50 years is 5869.4.

(a) The calculated differential condition for populace development is:

dP/dt = kP(1 - P/K)

where P is the populace, t is time, k is the development rate, and K is the carrying capacity.

Substituting the given values, we get:

dP/dt = 0.0017P(1 - P/5900)

(b) Utilizing Euler's strategy with step measure h = 1, we have:

P(0) = 1000

P(1) = P(0) + hdP/dt(P(0))

P(1) = 1000 + 10.00171000(1 - 1000/5900)

P(1) ≈ 1008

After 50 years, we would rehash this prepare 50 times to induce a gauge for the population.

(c) To discover an equation for the populace after a long time, able to utilize the calculated condition with starting condition P(0) = 1000. Joining both sides, we get:

∫(1/P) dP = ∫k(1 - P/K) dt

ln|P| = kt - ln|K - P|

Utilizing the starting condition, we get:

ln|1000| = k0 - ln|K - 1000|

ln|K - 1000| = ln|K| + ln|1000|

ln|K - 1000| = ln|K1000|

K - 1000 = K1000/e^(k0)

K - 1000 = K*1000/1

K = 6900

In this manner, the equation for the populace after a long time is:

P(t) = 6900/(1 + 5.882e^(-0.0017t))

(d) To discover the populace after 50 a long time, able to utilize the equation:

P(50) = 6900/(1 + 5.882e^(-0.001750))

P(50) ≈ 5869.4

The populace after 50 a long times is around 5869.4. 

To know more about differential equations refer to this :

https://brainly.com/question/1164377

#SPJ4

A can be diagonalized if it has 2 unit eigenvectors All two eigenvalues are distinct and the eigenvectors that correspond to distinct eigenvalues are orthogonal Eigenvalues of A are the roots of a quadratic polynomial. The third eigenvalue is 5.

Given that two eigenvalues of a 3 x 3 matrix A are λ1 = 3, λ2 = 4, and det(A) = 60.

We know that the product of all eigenvalues of a matrix is equal to its determinant. So, we have:

λ1 * λ2 * λ3 = det(A)

Substituting the given values, we get:

3 * 4 * λ3 = 60

Simplifying, we get:

λ3 = 5

Therefore, the third eigenvalue is 5.

Statement (a) is false because having 2 unit eigenvectors does not guarantee that a matrix can be diagonalized.

Statement (b) is false because even if the eigenvalues are distinct, the eigenvectors may not be orthogonal.

Statement (c) is true because eigenvectors that correspond to distinct eigenvalues are always orthogonal.

Statement (d) is true because the eigenvalues of a 2 x 2 real matrix are the roots of a quadratic polynomial.

To learn more about eigenvalue visit: https://brainly.com/question/31650198

#SPJ11

Sure, I can help with that! To determine which property or properties each relation fails to satisfy, we first need to understand what each of those properties means.

A relation R on a set A is reflexive if for every element a in A, (a,a) is in R.
A relation R on a set A is anti-symmetric if for every distinct elements a and b in A, if (a,b) is in R then (b,a) is not in R.
A relation R on a set A is transitive if for every elements a, b, and c in A, if (a,b) is in R and (b,c) is in R then (a,c) is in R.

Now, let's look at each of the proposed relations and determine which properties they fail to satisfy:

1. R = {(1,1), (2,2), (3,3), (1,2), (2,3), (1,3)}
This relation is not anti-symmetric because (1,2) is in R and (2,1) is also in R.

2. R = {(1,1), (2,2), (3,3), (1,2), (2,1)}
This relation is not transitive because (1,2) is in R and (2,1) is also in R, but (1,1) is not in R.

3. R = {(1,1), (2,2), (3,3), (1,2), (2,3), (1,3), (3,2)}
This relation is not anti-symmetric because (3,2) is in R and (2,3) is also in R.

Learn more about relation R: https://brainly.com/question/30088609

#SPJ11

The relation R defined on the positive integers is not a partial order, as it does not satisfy the antisymmetric property.

The relation R is an equivalence relation, as it satisfies the three defining properties: reflexivity, symmetry, and transitivity.

The relation R defined on the positive integers is not a partial order. This can be explained as follows :

The relation R does not satisfy the antisymmetric property. Specifically, there exist positive integers a and b such that a R b and b R a, but a ≠ b. For example, consider a = 4 and b = 6. Both 4 and 6 have a common divisor greater than 1 (namely, 2), so 4 R 6 and 6 R 4. However, 4 ≠ 6, so the relation R is not antisymmetric and therefore cannot be a partial order.

The relation R is an equivalence relation. This is because it satisfies the three defining properties: reflexivity, symmetry, and transitivity.

Reflexivity follows immediately from the definition of a common divisor, since any positive integer has itself as a common divisor.

Symmetry also follows from the definition, since if a and b have a common divisor greater than 1, then so do b and a.

Finally, transitivity follows from the fact that if a and b have a common divisor greater than 1, and b and c have a common divisor greater than 1, then a and c must also have a common divisor greater than 1 (namely, any common divisor of b and a, and any common divisor of b and c, must also be a common divisor of a and c). Therefore, the relation R is an equivalence relation on the positive integers.

To learn more about equivalence relation visit : https://brainly.com/question/15828363

#SPJ11

The margin of error for a 80% confidence interval for the population mean is  57.82 square feet.

The number of square feet per house are normally distributed with a population standard deviation of 137 square feet and an unknown population mean. To find the margin of error for a 80% confidence interval, we need to use the formula:

Margin of error = z*(σ/√n)

where z is the z-score corresponding to the level of confidence (80% corresponds to z=1.282), σ is the population standard deviation (given as 137), and n is the sample size (given as 19).

Plugging in the values, we get:

Margin of error = 1.282*(137/√19) = 57.82

Therefore, the margin of error for a 80% confidence interval is 57.82 square feet.

Learn more about margin of error at https://brainly.com/question/14989968

#SPJ11

We fail to reject the null hypothesis since the calculated t-statistic (0) is not greater than the critical values (-2.093 and 2.093). There is not enough evidence to suggest that the mean score in 2018 differs significantly from the mean score in 2017.

Based on the information given, the mean score on the math SAT in 2017 was not provided. However, assuming that the question is asking about the mean score in 2018, we can use the given values to answer the question.

(a) In order to determine if the assumptions for a hypothesis test are satisfied, we need to check if the sample is random and if the data is normally distributed. As long as the sample was selected randomly and independently of each other and the population is normally distributed, the assumptions for a hypothesis test are satisfied.

(b) We can perform a hypothesis test to investigate if the mean score in 2018 differs from the mean score in 2017 using the following steps:

Null Hypothesis (H0): The mean score in 2018 is equal to the mean score in 2017.
Alternative Hypothesis (Ha): The mean score in 2018 is not equal to the mean score in 2017.

We can use a two-tailed t-test to test the hypothesis since the population standard deviation is not known. Assuming a level of significance of 0.05, and using a t-distribution table with a degree of freedom of n-1=19, the critical values are -2.093 and 2.093.

The sample mean score in 2018 is given as 580. The mean score in 2017 is not provided in the question. Assuming that the mean score in 2017 is also 580, we can calculate the t-statistic as follows:

t = (sample mean - population mean) / (population standard deviation / sqrt(sample size))
t = (580 - 580) / (15 / sqrt(20))
t = 0

Since the calculated t-statistic (0) is not greater than the critical values (-2.093 and 2.093), we fail to reject the null hypothesis. Therefore, we can conclude that there is not enough evidence to suggest that the mean score in 2018 differs significantly from the mean score in 2017.

More on hypothesis: https://brainly.com/question/31475463

#SPJ11

The solution to the equation  5 + 3x -7x(x+8) = 9-x is -20

First, simplify

5 + 3x - 7x - 56 = 9-x

Simplifying further:

-4x - 51 = 9-x

-4x - 51 + x = 9

-3x - 51 = 9

-3x = 60

x  = 60/-3

x = -20

based on the above, we can state that the solution the equation is -20

Note that an equation is a mathematical statement that includes the sign 'equal to' between two expressions with equal values. For instance, 3x + 5 equals 15. There are several sorts of equations, such as linear, quadratic, cubic, and so on.

Learn more about equations:
https://brainly.com/question/29054118
#SPJ1

The formula that can be used to find the nth term of the following geometric sequence is aₙ = (-1)ⁿ2(3)ⁿ⁻³

Every term in a geometric series is obtained by multiplying the term before it by the same number. The formula for the nth term of a geometric sequence is

aₙ = a₁rⁿ⁻¹

Figuring out the value for r by dividing aₙ by aₙ₋₁.

a₄/a₃ = 6/ (-2)

a₄/a₃ = -3

r = -3

Thus,

a₁ = -2/9

aₙ = (-2/9)(-3)ⁿ⁻¹

Factoring out the 3s from the 9 -

aₙ = (-2/3²)(-3)ⁿ⁻¹              

Factor ing-1 from  and -3 -

aₙ = -2(3²)(-1)ⁿ⁻¹(3)ⁿ⁻¹        

Combining the like terms -

aₙ  = (-1)(2)(-1)ⁿ⁻¹(3)ⁿ⁻³      

Multiplying the -1 term by 1.

aₙ = 2(-1)ⁿ⁻²(3)ⁿ⁻³            

aₙ = (-1)ⁿ2(3)ⁿ⁻³

Read more about geometric sequence on:

https://brainly.com/question/1509142

#SPJ4

Answer:

A

Step-by-step explanation:

Precalc Edge 2023

The probability of getting exactly 1 blue marble is 9/22 or approximately 0.409.

The probability of getting exactly 1 blue marble can be calculated in two steps:

Step 1: The probability of drawing a blue marble on the first draw is:

P(Blue on first draw) = 3/12

After drawing a blue marble, there will be 2 blue, 4 red, and 5 green marbles left in the bag.

The probability of drawing a non-blue marble on the second draw is:

P(Non-blue on second draw) = 9/11

Alternatively, if a non-blue marble is drawn first, there will be 3 blue, 4 red, and 4 green marbles left in the bag. The probability of then drawing a blue marble on the second draw is:

P(Blue on a second draw after non-blue on the first draw) = 3/11

So the probability of getting one blue and one non-blue marble on the first and second draws in any order is:

P(One blue and one non-blue) = P(Blue on first draw) × P(Non-blue on second draw) + P(Non-blue on first draw) × P(Blue on second draw after non-blue on first draw)

P(One blue and one non-blue) = (3/12) × (9/11) + (9/12) × (3/11) = 27/132

Step 2: There are two possible orders in which we can get exactly 1 blue marble is:

blue on the first draw and non-blue on the second draw, or non-blue on the first draw and blue on the second draw.

The probability of getting exactly 1 blue marble is:

P(Exactly 1 blue) = P(One blue and one non-blue) + P(One non-blue and one blue)

P(Exactly 1 blue) = 27/132 + 27/132 = 54/132

Simplifying, we get:

P(Exactly 1 blue) = 9/22

Therefore, the probability of getting exactly 1 blue marble is 9/22 or approximately 0.409.

To learn more about probability visit:

brainly.com/question/30648498

We can conclude that if X is normally distributed with a mean of 11 and a standard deviation of 3, then the value of x that solves P(X > x) = 0.8 is x = 13.52.

We need to find the value of x such that P(X > x) = 0.8, where X is a normally distributed random variable with mean μ = 11 and standard deviation σ = 3.

From the properties of the standard normal distribution, we know that if Z is a standard normal random variable, then P(Z > z) = 0.8 corresponds to z = 0.84 (found using a standard normal table or calculator).

We can standardize X to a standard normal random variable Z using the formula:

Z = (X - μ) / σ

Substituting the values μ = 11 and σ = 3, we get:

Z = (X - 11) / 3

Now, we want to find the value of x such that P(X > x) = 0.8. We can rewrite this as:

P(Z > (x - 11) / 3) = 0.8

Using the standard normal table or calculator, we find that P(Z > 0.84) = 0.2005.

Therefore, we can write:

0.2005 = P(Z > 0.84) = P((X - 11) / 3 > 0.84) = P(X > 11 + 3(0.84)) = P(X > 13.52)

So the value of x that solves P(X > x) = 0.8 is x = 13.52.

Therefore, we can conclude that if X is normally distributed with a mean of 11 and a standard deviation of 3, then the value of x that solves P(X > x) = 0.8 is x = 13.52.

To learn more about distributed visit:

https://brainly.com/question/28060657

#SPJ11

The angle of elevation from Row A to the bottom of the screen 13.3.

The angle of depression from Row P to the bottom of the screen 4.4

let angle of elevation of Row A to the bottom of the Screen be Ae

So, tan Ae = 2.5 - 5.8tan 11  /5.8

tan Ae = 0.23665

Ae = 13.3

Now, let the angle of depression of Row P to the bottom of the screen be P

tan P  =  2.3 tan 11- 2.5/ 2.5

tan P = 0.077

P = 4.4

Learn more about Angle Elevation here:

https://brainly.com/question/21137209

#SPJ1

The value of the expression is 4y.

Given is an expression, [tex]12x^{2} y/ 3x^2[/tex], we need to simplify it,

[tex]12x^{2} y/ 3x^2[/tex]

= 12 × x² × y / 3 × x²

= 4 × x² × y / x²

= 4y

Hence, the value of the expression is 4y.

Learn more about expression click;

https://brainly.com/question/14083225

#SPJ1

The inverse function in slope-intercept form (mx+b) of function f(x) = -3/5x + 6 is -5/3x + 10.

To find the inverse of a function, we start by swapping the x and y variables. Then, we solve the equation for y.

In this case, the inverse function is g(x) = (5/3)x + 6, which is in slope-intercept form (mx+b) with m=5/3 and b=6.

Swapping x and y, we get x = -3/5y + 6.

Now, we solve for y:

x - 6 = -3/5y

-5/3(x - 6) = y

So the inverse of f(x) is:

[tex]f^{-1}[/tex](x) = -5/3(x - 6)

In slope-intercept form, this is:

[tex]f^{-1}[/tex](x) = -5/3x + 10

Learn more about the inverse function at

https://brainly.com/question/31180870

#SPJ4

The Approximate  height after 3 seconds using 6 rectangles is 255.45m

To inexact the stature of the shot after 3 seconds utilizing 6 rectangles, we are able to utilize the midpoint to run the show of guess. Here are the steps:

1. Partition the interim [0, 3] into 6 subintervals of rise to width, which is (3 - 0)/6 = 0.5. The 6 subintervals are:

[0, 0.5], [0.5, 1], [1, 1.5], [1.5, 2], [2, 2.5], [2.5, 3].

2. For each subinterval, discover the midpoint and assess the work v(t) at that midpoint. The stature of the shot at that time can be approximated as the item of the speed and the width of the subinterval.

3. Add up the zones of the 6 rectangles to urge the whole surmised stature(height).

Here are the calculations:

- For the subinterval [0, 0.5], the midpoint is (0 + 0.5)/2 = 0.25. The speed at t = 0.25 is v(0.25) = -15.4(0.25) + 147 = 143.65.

The inexact tallness amid this subinterval is 0.5(143.65) = 71.825.

- For the subinterval [0.5, 1], the midpoint is (0.5 + 1)/2 = 0.75. The speed at t = 0.75 is v(0.75) = -15.4(0.75) + 147 = 135.85.

The inexact stature amid this subinterval is 0.5(135.85) = 67.925.

- For the subinterval [1, 1.5], the midpoint is (1 + 1.5)/2 = 1.25. The speed at t = 1.25 is v(1.25) = -15.4(1.25) + 147 = 123.5.

The surmised stature amid this subinterval is 0.5(123.5) = 61.75.

- For the subinterval [1.5, 2], the midpoint is (1.5 + 2)/2 = 1.75. The speed at t = 1.75 is v(1.75) = -15.4(1.75) + 147 = 107.9.

The inexact tallness amid this subinterval is 0.5(107.9) = 53.95.

- For the subinterval [2, 2.5], the midpoint is (2 + 2.5)/2 = 2.25. The speed at t = 2.25 is v(2.25) = -15.4(2.25) + 147 = 88.15.

The surmised tallness amid this subinterval is 0.5(88.15) = 44.075.

- For the subinterval [2.5, 3], the midpoint is (2.5 + 3)/2 = 2.75. The speed at t = 2.75 is v(2.75) = -15.4(2.75) + 147 = 64.15.

The inexact tallness amid this subinterval is 0.5(64.15) = 32.075.

To induce the full inexact tallness, we include the zones of the 6 rectangles:

Add up to surmised height = 71.825 + 67.925 + 61.75 + 53.95 = 255.45

To know more about velocity refer to this :

https://brainly.com/question/24445340

#SPJ4

Answer:

Volume of sphere A

= (4/3)π(3^3) = 36π cubic units

Volume of sphere B

= (4/3)π((3/2)^3) = (4/3)π(27/8) = (9/2)π = 4.5π cubic units

The ratio of the volume of sphere A to sphere B is 4.5:36 = 1:8.

Theorem 5.6.1 states that any partially ordered set of size mn has either a chain of size m or an antichain of size n.

To prove this theorem, we can use induction on m.

Base Case: When m = 1, the partially ordered set has n elements, which can be viewed as an antichain of size n or a chain of size 1.

Inductive Hypothesis: Assume that any partially ordered set of size (m-1)n has either a chain of size m-1 or an antichain of size n.

Inductive Step: Consider a partially ordered set P of size mn. We choose an element p in P, and consider the two sets:

A = {x ∈ P : x < p}

B = {x ∈ P : x > p}

Note that p cannot be compared to any element in A or B, since otherwise, we would have either a chain of length m or an antichain of length n. Therefore, p is not contained in any chain or antichain of P.

Now, we can apply the inductive hypothesis to the sets A and B. If A has a chain of size m-1, then we can add p to the end of that chain to get a chain of size m. Otherwise, A has an antichain of size n-1, and similarly, B has either a chain of size m-1 or an antichain of size n-1. If both A and B have antichains of size n-1, then we can combine them with p to get an antichain of size n.

Therefore, in all cases, we have either a chain of size m or an antichain of size n, as required. This completes the proof of Theorem 5.6.1.

Learn more about

#SPJ11

If a man swimming in a stream which flows 4 Km/h finds that in a given time he can swim 5 times as far at 12 km/h rate he can swim.

Production of upstream oil and gas is carried out by businesses that locate, mine, or create raw resources. The end-user or customer is closer to the production of oil and gas in the downstream sector. Here is a look at the upstream and downstream production of oil and gas, their individual roles, and how they fit into the larger supply chain.

Let's take swimmer speed  = x km/h.

The time is taken by the swimmer = t

The speed of the stream = 4 km/h

The speed when swimming with the stream = x+ 4 km/h

The distance covered when swimming with the stream D₁= (x+4)t

The speed when swimming against the stream = x -4

The distance covered when swimming against the stream D₂= (x-4)t

The swimmer swims 5 times when swimming against the stream

Therefore,

D₁ = 5D₂

(x+4)t = 2((x-4)t)

x+4 = 2x- 8

x = 12 km/h

12 km/h is the speed of the swimmer.

Learn more about Rate of flow:

https://brainly.com/question/14002121

#SPJ4

To discover the likelihood that a haphazardly chosen bat will final more than 70 days, we have to be standardize the esteem utilizing the standard typical conveyance. Ready to do this by calculating the z-score:

z = (70 - 60) / 5 = 2

Employing a standard typical dissemination table or calculator, we discover that the likelihood of a z-score more noteworthy than 2 is roughly 0.0228. Hence, the likelihood that a haphazardly chosen bat will final more than 70 days is around 0.0228.

To discover the rate of bats that fall flat to final the outlined sum of days (48-72), we have to be discover the region beneath the typical distribution curve to the cleared out of 48 and to the proper of 72 and include them together. This speaks to the likelihood of a bat enduring less than 48 days or more than 72 days.

To standardize the values of 48 and 72, we utilize the same equation as in portion (a):

z1 = (48 - 60) / 5 = -2.4

z2 = (72 - 60) / 5 = 2.4

Employing a standard ordinary conveyance table or calculator, we discover that the range to the cleared out of z1 is around 0.0082 and the region to the correct of z2 is additionally around 0.0082. Hence, the full likelihood of a bat falling flat to final between 48 and 72 days is roughly:

0.0082 + 0.0082 = 0.0164

To change over this to a rate, we duplicate by 100:

0.0164 * 100 = 1.64%

Hence, roughly 1.64% of bats come up short to final the outlined sum of days.

Learn more about  probability from

https://brainly.com/question/251701

#SPJ1

The solution is w = (3,1,-4). The solution is q = (3, 9, -4). The coordinates of vector B in the basis B = (-8, 1, 0, 8).

To find w, we need to express [w]s in terms of the standard basis. We can do this by finding the change of basis matrix from S to the standard basis, and then multiplying it by [w]s. The change of basis matrix from S to the standard basis is given by

[3 2 1] [1 0 0]

[1 5 4] = [0 1 0]

[-4 6 8] [0 0 1]

Multiplying this matrix by [w]s = [8 5 -8]ᵀ, we get

[1 0 0] [8] [3]

[0 1 0] x [5] = [1]

[0 0 1] [-8] [-4]

Therefore, [w] = (3,1,-4).

To find q, we need to express [q]s in terms of the basis {x² + 1, x² - 1, 2x - 1}. We can do this by solving the system of equations

q = a(x² + 1) + b(x² - 1) + c(2x - 1)

Substituting x = 1, we get

5 = 2a - 2b + c

Substituting x = -1, we get

5 = 2a + 2b - c

Substituting x = 0, we get:

5 = b - c

Solving these equations, we get a = 3, b = 9, and c = -4. Therefore, [q] = (3, 9, -4).

To find B, we need to express [B]s in terms of the basis {[3 6], [0 -1], [0 -8], [1 0]}. We can do this by finding the change of basis matrix from S to this basis, and then multiplying it by [B]s. The change of basis matrix from S to this basis is given by

[3 0 0 1] [1 0 0 0]

[6 -1 -8 0] = [0 1 0 0]

[0 0 0 0] [0 0 0 1]

[0 0 0 0] [0 0 1 0]

Multiplying this matrix by [B]s = [-8 1]ᵀ, we get

[1 0 0 0] [-8] [-8]

[0 1 0 0] x [1] = [1]

[0 0 0 1] [0] [0]

[0 0 1 0] [-8] [8]

Therefore, [B] = (-8, 1, 0, 8).

To know more about matrix:

https://brainly.com/question/28180105

#SPJ4