75 mL of 0.50 M H₂SO₄ solution will be required to completely neutralize 3.0 grams of NaOH.
The balanced chemical equation for the reaction between sulfuric acid (H₂SO₄) and sodium hydroxide (NaOH) will be:
H₂SO₄ + 2NaOH → Na₂SO₄ + 2H₂O
From the equation, we can see that 1 mole of sulfuric acid reacts with 2 moles of sodium hydroxide.
First, we need to calculate the number of moles of NaOH present in 3.0 grams:
moles of NaOH = mass/molar mass
moles of NaOH = 3.0 g / 40.00 g/mol (molar mass of NaOH)
moles of NaOH = 0.075 mol
Since 1 mole of H₂SO₄ reacts with 2 moles of NaOH, the number of moles of H₂SO₄ required to neutralize 0.075 moles of NaOH is:
moles of H₂SO₄ = 0.075 mol / 2 = 0.0375 mol
Now, we can use the definition of molarity to calculate the volume of 0.50 M H₂SO₄ required to provide 0.0375 moles of H₂SO₄:
Molarity = moles of solute/volume of solution (in liters)
Volume of solution = moles of solute/Molarity
Volume of solution = 0.0375 mol / 0.50 mol/L
Volume of solution = 0.075 L or 75 mL
To know more about Volume here
https://brainly.com/question/1578538
#SPJ4
what term refers to the ability of open systems to fight off deterioration, sustain themselves and grow? a. requisite variety b. network properties c. negative entropy d. modeling techniques
The ability of open systems to fight off deterioration, sustain themselves and grow is Negative Entropy. Correct answer is option C
Negative Entropy is an important concept in thermodynamics and physics, where it is defined as a decrease in the entropy of a system. Entropy is the measure of randomness or disorder in a system, so negative entropy indicates that a system is becoming more organized, or that it is moving away from equilibrium.
This can be seen in the evolution of life, where species become more complex and adaptive over time, as well as in the growth of technology, where innovations allow us to become more efficient and productive. In essence, Negative Entropy is the power that allows open systems to improve and evolve. Therefore Correct answer is option C
Know more about thermodynamics here:
https://brainly.com/question/1368306
#SPJ11
How many moles are in 3.5 moles of FeF3
We just use molar mass for FeF3 (129.9 g/mol) to calculate the number moles in 3.5grammes of FeF3. Hence, just 3.5 x 129.9 = 4546.5 moles of FeF3 need to be multiplied.
Describe the Mass.An object's mass is determined by how much matter it has. Something that has more substance will weigh heavier overall. For instance, because an elephant contains more stuff than a mouse does, it has a heavier mass.
55.8+3⋅19=116 g/mole24 g116 g/mol=0.207 moles of FeF3
0.207 moles×6.022×23molecules/mole=1.2×1023molecules
How is mass measured?A thing's mass is how much matter it contains. Using a balance, scientists frequently determine mass. A beam balance or perhaps an electronic balance can be used to measure the mass of solids directly. Measure a liquid's volume, then use the density table to determine the liquid's mass.
To know more about mass visit:
https://brainly.com/question/15959704
#SPJ1
if the percent of solute in an aqueous solution is 5%, what is the percentage of water in that solution?
Answer: The percentage of water in the solution would be 95%.
Explanation:
The percent composition of a solution refers to the amount of each component in the solution as a percentage of the total solution. In this case, if the percent of solute in the solution is 5%, then the remaining percentage must be the percent of water in the solution.
Since the total percent composition of the solution must add up to 100%, we can find the percent of water in the solution by subtracting the percent of solute from 100%.
% Water = 100% - % Solute
% Water = 100% - 5%
% Water = 95%
Therefore, the percentage of water in the solution is 95%.
calculate the volume (in ml) of 2.230 m sucrose containing 0.7718 moles sucrose. include units in your answer.
The volume of 2.230 m sucrose containing 0.7718 moles sucrose is 2.922 ml.
The volume of 2.230 m sucrose containing 0.7718 moles sucrose can be calculated using the following equation:
Volume (ml) = (Molarity (m) x Volume (L)) / Moles (mol)
Therefore, Volume (ml) = (2.230 m x 1L) / 0.7718 mol
Volume (ml) = 2.922 ml
The volume of 2.230 m sucrose containing 0.7718 moles sucrose, the molarity of sucrose needs to be known. Molarity is the amount of a solute that is present in one liter of a solution.
Molarity is typically expressed in terms of moles per liter (m). To calculate the volume, the equation (Molarity x Volume) / Moles is used. In this equation, Molarity is 2.230 m, Volume is 1L, and Moles is 0.7718 mol.
When these values are plugged into the equation, the resulting volume is 2.922 ml.
The volume of 2.230 m sucrose containing 0.7718 moles sucrose is 2.922 ml.
to know more about sucrose refer here:
https://brainly.com/question/29186350#
#SPJ11
the typical concentration of acetic acid in commercial vinegar is 5.0% w/v. calculate the molarity of this solution
The molarity of the commercial vinegar is 0.833 M.
To calculate the molarity of the commercial vinegar, we need to know the formula of acetic acid, which is CH3COOH. Then, we need to convert the percentage w/v to grams per liter (g/L) by assuming 100 mL of solution.
Finally, we can use the formula of molarity to calculate the concentration of acetic acid in moles per liter (mol/L). Here are the steps:
Step 1: Determine the formula of acetic acid (CH3COOH).
Step 2: Convert the percentage w/v to g/L by assuming 100 mL of solution.5.0% w/v = 5.0 g/100 mL = 50 g/L
Step 3: Calculate the molar mass of acetic acid. C = 12.01 g/mol, H = 1.01 g/mol, O = 16.00 g/mol.Molar mass = (2 x C) + (4 x H) + (2 x O) = 60.05 g/mol
Step 4: Calculate the number of moles of acetic acid in 1 L of solution.Number of moles = mass / molar massNumber of moles = 50 g / 60.05 g/mol = 0.8327 mol
Step 5:Calculate the molarity of the solution.Molarity = number of moles / volume Molarity = 0.8327 mol / 1 L = 0.833 M
Therefore, the molarity of the commercial vinegar is 0.833 M.
To know more about acetic acid click on below link:
https://brainly.com/question/15202177#
#SPJ11
In a Lab session, you were asked to:
1. Model one of the chemical reaction types: Synthesis, Decomposition, or replacement.
2. List the elements/ compounds you used in your reaction.
3. Describe the reaction as endothermic or exothermic. Justify your answer.
4. Record a video demonstrating the modelling.
5. Explain how a closed system is suitable for your reaction. Relate your answer to law of conservation of mass.
6. During the reaction, the reactants had a potential energy of 400 KJ. As for the final products it had 200 KJ. Demonstrate the reaction by drawing the graph.
7. Identify if the reaction is an exothermic or endothermic reaction. Explain.
8. Interpret the factors that might affect your reaction rate.
1. I modeled a decomposition reaction.
2. used hydrogen peroxide (H2O2) as the compound for the reaction.
3. The reaction is exothermic. This is because the decomposition of hydrogen peroxide releases heat and energy, which can be observed through the effervescence or bubbling of the solution.
4. I recorded a video demonstrating the experiment and the resulting reaction.
5. A closed system is suitable for this reaction because it follows the law of conservation of mass, which states that mass cannot be created or destroyed, only transferred or transformed.
6. The potential energy diagram for this reaction would show the reactants at a higher energy level (400 KJ) and the products at a lower energy level (200 KJ), with the difference in energy being released as heat and energy.
7. The reaction is exothermic because it releases heat and energy, as observed through the effervescence or bubbling of the solution.
8. Factors that could affect the reaction rate include temperature, catalysts, and concentration of the reactants.
What is decomposition reaction?
A decomposition reaction is a type of chemical reaction in which a compound breaks down into two or more simpler substances. This type of reaction usually requires the addition of energy, such as heat or light, to break the bonds holding the compound together.
To know more about decomposition reaction, visit:
https://brainly.com/question/16987748
#SPJ1
how many different alkenes result when 2-bromohexane is treated with a strong base? select answer from the options below 1 2 3 4
When 2-bromohexane is treated with a strong base the alkenes that would result is given as 1
What alkenes would resultWhen 2-bromohexane is treated with a strong base, such as sodium ethoxide (NaOEt) or sodium hydroxide (NaOH), it undergoes elimination reaction (also called dehydrohalogenation) to form different alkenes.
The product(s) of the reaction depend on the position of the β-carbon (the carbon next to the bromine atom) that undergoes deprotonation. Since there are two β-carbons in 2-bromohexane, two different alkenes can be formed.
Read more on alkenes here:https://brainly.com/question/29120960
#SPJ1
PLEASE HELP THIS IS URGENT
Answer:
in the first box the answer will be=37.2
and in the second box= 22.4
what is the ph after 0.150 mol of hcl is added to the buffer from part a? assume no volume change on the addition of the acid.
Since we do not know the specific buffer from part a, we cannot determine the exact value of pKa or the initial concentrations of A- and HA. We cannot provide a numerical value for the pH of the buffer after the addition of 0.150 mol of HCl.
What is Acid?
An acid is a substance that donates hydrogen ions (H+) or protons in a chemical reaction. In other words, acids are compounds that have a pH less than 7 and can increase the concentration of H+ ions in a solution.
When 0.150 mol of HCl is added to a buffer solution, it will react with the buffer components to form their conjugate acid and the chloride ion. Since the volume of the buffer solution is assumed to remain constant, the concentration of the buffer components will not change significantly.
Let's assume that the buffer contains a weak acid, HA, and its conjugate base, A-. The dissociation reaction for the weak acid is:
HA + H2O ⇌ H3O+ + A-
Ka = [H3O+][A-]/[HA]
At equilibrium, the pH of the buffer is given by:
pH = pKa + log([A-]/[HA])
When HCl is added to the buffer, it will react with A- to form HCl(aq) and HA(aq). The amount of A- that reacts with HCl is equal to the amount of HCl added, which is 0.150 mol in this case. This will cause a decrease in the concentration of A- and an increase in the concentration of HA.
The new concentrations of A- and HA can be calculated using the Henderson-Hasselbalch equation:
pH = pKa + log([A-]/[HA])
Before the addition of HCl, the concentrations of A- and HA are given by:
[A-]0 and [HA]0
After the addition of HCl, the concentrations of A- and HA become:
[A-] = [A-]0 - 0.150 mol
[HA] = [HA]0 + 0.150 mol
pH = pKa + log(([A-]0 - 0.150 mol)/([HA]0 + 0.150 mol))
Learn more about Acid from given link
https://brainly.com/question/25148363
#SPJ1
Which of the following compounds is the least reactive toward nucleophilic aromatic substitution? A) 1-chloro-4-nitrobenzene B) 1-iodo-2-nitrobenzene C) 1-fluoro-4-nitrobenzene D) 1-bromo-3-nitrobenzene
Benzenesulphonic acids is least sensitive in an electrophilic replacement of an aromatic because of the M effect. 1-Chloro-4-nitrobenzene is the nucleophilic aromatic substitution that is least reactive to it (option A).
By nucleophilic, what do you mean?A substance is referred to as a nucleophile if it has a propensity to give electron pairs to electron acceptors in order to establish chemical bonds with them. Any ion, molecule, or pi bond with two free electrons or an electron pair has the capacity to act in a nucleophilic manner.
A nucleophile, is water?Water attracts electron-deficient compounds like protons, making it a nucleophile. Due to the easy accessibility of a singular electron pair on oxygens, water has a stronger nucleophilic than electrophilic nature.
To know more about Nucleophilic visit:
https://brainly.com/question/30713995
#SPJ1
describe how the orientaon of the glycosidic bond affects the properes of the polysaccharides it creates.
The orientation of the glycosidic bond affects the properties of the polysaccharides it creates by determining the geometry of the sugar units in the polymer chain. When the glycosidic bond is in the alpha configuration, the sugar ring has a twisted conformation, which results in the sugar units being oriented in a more linear fashion.
In contrast, when the glycosidic bond is in the beta configuration, the sugar ring has a more planar conformation, which results in the sugar units being oriented in a more zig-zag fashion.
This difference in orientation affects the overall structure of the polysaccharide. Polysaccharides with alpha glycosidic bonds tend to form helical structures, while polysaccharides with beta glycosidic bonds tend to form sheet-like structures. This is because the twisted conformation of the alpha sugar units allows for the formation of hydrogen bonds between adjacent sugar units, which leads to the formation of a helix.
In contrast, the more planar conformation of the beta sugar units does not allow for the formation of hydrogen bonds between adjacent sugar units, which leads to the formation of a sheet.
Additionally, the orientation of the glycosidic bond affects the solubility and digestibility of the polysaccharide. Polysaccharides with alpha glycosidic bonds tend to be more soluble and more easily digested than polysaccharides with beta glycosidic bonds.
This is because the helical structure of alpha-polysaccharides allows for more surface area to be exposed to water and digestive enzymes, while the sheet-like structure of beta-polysaccharides does not.
Learn more about polysaccharides here:
https://brainly.com/question/30529578#
#SPJ11
Does the phrase “Survival of the fittest” refer to an individual (single organism) or a species (group of same organisms)? Why?
The phrase "survival of the fittest," popularised in Charles Darwin's fifth edition of On the Origin of Species (published in 1869), argued that animals most adapted to their environment have the best chances of surviving.
What does "survival of the fittest" mean in terms of species?The environment and its conditions are continually changing, and the fittest individuals must generate even more fit offspring in order to ensure their survival. Here is when evolution comes into play.
Are organisms who are physically fitter more likely to survive and pass on their genes?An evolutionary mechanism is natural selection. Environment-adapted organisms have a higher chance of surviving and dispersing the genes that contributed to their success.
To know more about Charles Darwin's visit:-
brainly.com/question/13428382
#SPJ9
how many moles of naoh will react with 0.50 mol of h2co3?
a. 0,25 mol NaOH
b. 0.50 mol NaOH
c. 1.0 mol NaOh
d. 2.0 mol NaOH
We will need 1.0 mol NaOH to react with 0.5 mol pf H2CO3.
Let's understand this in detail:
The balanced chemical equation of the neutralization reaction between H2CO3 and NaOH is
H2CO3 + 2NaOH ⟶ Na2CO3 + 2H2O.
We need to use the mole ratio from the balanced equation to determine how many moles of NaOH will react with 0.50 mol of H2CO3. We can see from the equation that 1 mole of H2CO3 reacts with 2 moles of NaOH.
Therefore, 0.50 mol of H2CO3 will react with
(2/1) x 0.50 = 1.0 mol of NaOH.
Answer: c. 1.0 mol NaOH.
#SPJ11
Learn more about neutralization reaction: Define Neutralisation reaction along with examples. https://brainly.com/question/23008798
a saturated hydrocarbon has the maximum amount of hydrogens attached to the carbon skeleton. group of answer choices true false
True, a saturated hydrocarbon has the maximum amount of hydrogens attached to the carbon skeleton.
What is a hydrocarbon?Hydrocarbons are organic molecules that are made up of only carbon and hydrogen atoms. They may be composed of chains of various lengths, rings of various sizes, or a combination of both. The simplest hydrocarbons, such as methane (CH4), ethane (C2H6), and propane (C3H8), are gaseous at room temperature, whereas larger hydrocarbons are liquids, such as hexane (C6H14), or solids, such as hexadecane (C16H34).
Unsaturated hydrocarbons have carbon-carbon double or triple bonds in their structures, indicating that they are not completely saturated with hydrogen atoms. These hydrocarbons are commonly referred to as alkenes or alkynes, respectively. Alkenes have one double bond, whereas alkynes have one triple bond.
Read more about hydrocarbon :
https://brainly.com/question/22047391
#SPJ11
does the hydrogen necessary in the electron transport chain come from the splitting of carbon dioxide molecules
The hydrogen necessary for this process is ultimately derived from the splitting of carbon dioxide molecules. Yes, the hydrogen necessary for the electron transport chain is derived from the splitting of carbon dioxide molecules in a process known as the Calvin Cycle, or the light-dependent reaction.
In this process, carbon dioxide, water, and light energy are used to create high-energy molecules, such as ATP and NADPH, which are then used in the electron transport chain. During the Calvin cycle, carbon dioxide is reduced by NADPH and ATP to produce a three-carbon molecule called glycerate 3-phosphate.
Hydrogen is removed from glycerate 3-phosphate to create a two-carbon compound known as glyceraldehyde 3-phosphate. This compound is then used to create other compounds, such as glucose, which can be used for energy.
Know more about electron transport chain here:
https://brainly.com/question/24372542
#SPJ11
what is the ph for a titration of 25.0 ml of 25.0 ml of 0.365 m acetic acid 0.365 m acetic acid when 10.3 ml of 0.432 m when 10.3 ml of 0.432 m naoh have been added?
The pH for a titration of 25.0 mL of 0.365 M acetic acid when 10.3 mL of 0.432 M NaOH have been added is approximately 4.69.
The pH for a titration of 25.0 mL of 0.365 M acetic acid when 10.3 mL of 0.432 M NaOH have been added can be calculated using the following steps:
1. Calculate the moles of acetic acid (CH₃COOH) and sodium hydroxide (NaOH) before the reaction:
- Moles of CH₃COOH = volume × concentration
= 25.0 mL × 0.365 mol/L
= 9.125 mmol
- Moles of NaOH = volume × concentration
= 10.3 mL × 0.432 mol/L = 4.4456 mmol
2. Determine the moles of acetic acid and sodium hydroxide remaining after the reaction: Since acetic acid and sodium hydroxide react in a 1:1 ratio, the limiting reactant will be NaOH.
- Moles of CH₃COOH remaining = 9.125 mmol - 4.4456 mmol = 4.6794 mmol - Moles of NaOH remaining = 0 mmol (all NaOH is consumed in the reaction)
3. Calculate the concentration of acetic acid and acetate ion (CH₃COO-) after the reaction:
- [CH₃COOH] = moles of CH₃COOH remaining / total volume
= 4.6794 mmol / (25.0 mL + 10.3 mL)
= 0.12998 mol/L
- [CH₃COO-] = moles of NaOH consumed / total volume
= 4.4456 mmol / (25.0 mL + 10.3 mL)
= 0.12346 mol/L
4. Calculate the pH using the Henderson-Hasselbalch equation:
pH = pKa + log([CH₃COO-] / [CH₃COOH]) pKa of acetic acid is 4.76, so:
pH = 4.76 + log(0.12346 / 0.12998) ≈ 4.69
Therefore, the pH for a titration of 25.0 mL of 0.365 M acetic acid when 10.3 mL of 0.432 M NaOH have been added is approximately 4.69.
Learn more about titration here:
https://brainly.com/question/2728613#
#SPJ11
the volume of a container expands when it is heated from 159k to 456k. what was the original volume if the final volume is 15.5 l
The original volume of the container is 5.40 L.
The given final volume of a container when heated is 15.5 L. The container expands when heated from 159 K to 456 K.
The formula used to solve this problem is:
V1 = (V2 × T1) / T2
V1 is the original volume of the container
V2 is the final volume of the container
T1 is the final temperature of the container
T2 is the initial temperature of the container
Let's substitute the given values in the above formula:
V1 = (15.5 × 159) / 456V1 = 5.40 L
Therefore, the original volume of the container is 5.40 L.
To know more about original volume click here:
https://brainly.com/question/12014506
#SPJ11
what will you use to prepare the calibration curve in this project? group of answer choices a solvent blank. a series of solutions with the exact same analyte concentration. a series of solutions with various unknown analyte concentrations. a series of solutions with a range of precisely known analyte concentrations.
A series of solutions with a range of precisely known analyte concentrations. Option D
What is a calibration curve?A calibration curve is a graphical representation of the relationship between the concentration or amount of a substance, and a signal or measurement obtained from an analytical instrument or assay. The calibration curve is constructed by measuring the signal or response of the instrument or assay at different known concentrations or amounts of the substance, and plotting these values on a graph.
The resulting curve is then used to determine the concentration or amount of the substance in an unknown sample by measuring its signal or response and comparing it to the calibration curve.
Learn more about calibration curve:https://brainly.com/question/29729322
#SPJ1
if a second-order reaction has a half-life of 10.0 minutes when the initial reactant concentration is 0.250 m, what is the half-life when the initial concentration is 0.050 m?
The half-life of the reaction with an initial concentration of 0.050 m is 16.9 minutes,
which is longer than the half-life of 10.0 minutes when the initial concentration was 0.250 m.
The half-life of a second-order reaction depends on the initial reactant concentration.
When the initial concentration of a reactant is higher, the half-life of the reaction will be shorter; when the initial concentration of a reactant is lower, the half-life of the reaction will be longer.
Therefore, if a second-order reaction has a half-life of 10.0 minutes when the initial reactant concentration is 0.250 m, the half-life when the initial concentration is 0.050 m would be longer than 10.0 minutes.
To determine the exact half-life of the reaction with the lower initial concentration, we can use the integrated rate law for a second-order reaction:
ln[A]t = -kt + ln[A]0
In this equation, A
is the initial concentration of the reactant; and k is the reaction rate constant.
The half-life of the reaction with an initial concentration of 0.050 m, we can rearrange the equation to solve for t, the time in which the reactant concentration decreases to half of the initial concentration:
t = -(1/k) ln[0.5A0]
The initial concentration of 0.050 m, solve for t to get the half-life of the reaction with the lower initial concentration:
t = -(1/k) ln[0.5(0.050)] = 16.9 minutes
Therefore, the half-life of the reaction with an initial concentration of 0.050 m is 16.9 minutes, which is longer than the half-life of 10.0 minutes when the initial concentration was 0.250 m.
to know more about half-life refer here:
https://brainly.com/question/24710827#
#SPJ11
what conditions do the extremophile sulfolobus acidicaldonious survive under? select the two answers that are correct.
The extremophile sulfolobus acidicaldonius survives under high acidity and high temperature.
Thus, the correct answers are high temperature and high acidity (A and E).
A thermoacidophile species, such as Sulfolobus acidocaldarius, belong to the archaea phylum and is resistant to both high temperatures and highly acidic conditions. The adaptions of this species include that the optimal pH of its enzyme will lie below pH 7, since those are acidic conditions. Also, thermoacidophile species can inhabit hydrothermal springs, since they can live in high-temperature conditions.
Your question is incomplete, but most probably your options were
A. high temperature
B. low pressure
C. low oxygen
D. high alkalinity
E. high acidity
Thus, the correct options are A and E.
For more information about sulfolobus acidicaldonius refers to the link: https://brainly.com/question/15874458
#SPJ11
What is the pH of the solution obtained by mixing 35.00 mL of 0.250 M HCl and 35.00 mL of 0.125 M NaOH?
The pH of the solution obtained by mixing 35.00 mL of 0.250 M HCl and 35.00 mL of 0.125 M NaOH can be calculated as follows:
Let's understand this step-by-step:
1. HCl is an acid, while NaOH is a base. When an acid and a base react, they undergo a neutralization reaction, forming salt and water. The balanced chemical equation for the reaction between HCl and NaOH is:
HCl + NaOH → NaCl + H2O
This equation shows that 1 mole of HCl reacts with 1 mole of NaOH to produce 1 mole of NaCl and 1 mole of water.
Using the volumes and concentrations given in the question, we can calculate the moles of HCl and NaOH as follows: moles of HCl = 35.00 mL × 0.250 mol/L = 0.00875 mol
moles of NaOH = 35.00 mL × 0.125 mol/L = 0.004375 mol
The reaction between HCl and NaOH is 1:1, so the limiting reactant is NaOH because it has fewer moles. Therefore, all the NaOH will be used up, leaving some HCl unreacted. The number of moles of HCl that remain after the reaction is equal to the initial number of moles of HCl minus the number of moles of NaOH used up:
mol of HCl remaining = 0.00875 mol - 0.004375 mol = 0.004375 mol
The total volume of the solution is the sum of the volumes of the acid and the base:
Vtotal = Vacid + Vbase
Vtotal = 35.00 mL + 35.00 mL = 70.00 mL = 0.07000 L
The concentration of HCl in the solution is calculated using the number of moles of HCl remaining and the total volume of the solution:
[HCl] = mol of HCl remaining / Vtotal
[HCl] = 0.004375 mol / 0.07000 L
[HCl] = 0.0625 M
The pH of the solution can be calculated using the equation:
pH = -log[H+]
The concentration of H+ in the solution is equal to the concentration of HCl, so:
[H+] = [HCl] = 0.0625 M
Substituting this value into the pH equation:
pH = -log[H+]pH = -log(0.0625)pH = 1.20Therefore, the pH of the solution obtained by mixing 35.00 mL of 0.250 M HCl and 35.00 mL of 0.125 M NaOH is 1.20.
Learn more about pH: What is the approximate ph of a solution if the concentration of hydrogen ions is 5. 0 × 10–4 moles per liter? https://brainly.com/question/26424076
#SPJ11
a piece of metal with a mass of 31.5g is added to a graduated cylinder to calculate the volume. the water is initially at the 51 mark, and it rises to the 78 mark after the metal is added. what is the density of the metal?
The density of the metal is 1.167 g/ml.
The density of the metal can be calculated using the formula for density, ρ:
ρ = m /v
where ρ is the density, m is the mass, and v is the volume.
In this case, the mass of the metal is 31.5g and the volume can be determined by subtracting the initial volume (51mL) from the final volume (78mL) of water in the graduated cylinder. Thus, the volume of the metal is 27mL.
Using the formula, the density of the metal is then:
ρ = 31.5 g / 27mL
ρ = 1.167 g/ml
This means that 1 mL of the metal has a mass of 1.167g. Density is an important property of materials, as it affects other properties such as buoyancy. Generally, materials with a higher density will sink in a liquid, while those with a lower density will float.
Learn more about density here: https://brainly.com/question/1354972.
#SPJ11
old ammunition or fireworks, lithium-sulfur batteries, wastes containing cyanides or sulfides, and chlorine bleach and ammonia are examples of which type of hazardous waste?
These are all examples of chemical hazardous waste. Chemical hazardous waste is waste that is flammable, reactive, corrosive, or toxic. It can include things like unused pesticides, paint, cleaning products, or batteries.
Old ammunition or fireworks, lithium-sulfur batteries, wastes containing cyanides or sulfides, and chlorine bleach and ammonia are examples of Household hazardous waste.What is hazardous waste?Hazardous waste is a waste material that is harmful to human health or the environment. Every year, households and businesses generate hazardous waste in various forms. Because hazardous waste may be flammable, poisonous, reactive, or corrosive, it requires special disposal procedures. Hazardous wastes must be properly disposed of to safeguard human health and the environment.Household hazardous waste (HHW) is the type of waste that can be found in a typical home. This waste is produced by households when they use products that contain harmful chemicals. Old ammunition or fireworks, lithium-sulfur batteries, wastes containing cyanides or sulfides, and chlorine bleach and ammonia are examples of household hazardous waste.
For more such questions on hazardous waste
https://brainly.com/question/4055432
#SPJ11
the empirical formula of a chemical substance is ch2. the molar mass of a molecule of the substance is 56.108 g/mol. what is the molecular formula of the chemical substance? (4 points) c3h4 c4h8 c2h4 c6h6
The molecular formula of the chemical substance is C4H8.
The empirical formula of a chemical substance, CH2, and its molar mass of 56.108 g/mol can be used to calculate the molecular formula of the substance.
In order to do this, we need to divide the molar mass by the empirical formula mass. The empirical formula mass for CH2 is 12.011 g/mol, so the calculation is: 56.108 g/mol / 12.011 g/mol = 4.67.
4.67, is the ratio of the molecular mass to the empirical formula mass.
This means that the molecular formula of the chemical substance is C4H8, which has a molecular mass of 4 x 12.011 g/mol = 48.044 g/mol, and is the closest molecular mass to the given molar mass of 56.108 g/mol.
Therefore, the molecular formula of the chemical substance is C4H8.
to know more about molecular formula refer here:
https://brainly.com/question/14425592#
#SPJ11
The Quantum Theory Model seems to contradict one the above scientist's hypothesis. Who is it and why? Is there more than one?
Answer:
Multiple scientists, including Albert Einstein, David Bohm, John Bell, and Roger Penrose, have challenged certain aspects of quantum theory due to differing views about particle behavior, hidden variables, and consciousness. Despite the challenges, quantum theory remains widely accepted as one of the most accurate and well-tested frameworks in modern physics.
A student exposed r-1-bromo-2-propanol to sodium hydroxide, isolated an optically active product, and collected the proton nmr below. what is the structure of the compound that the student isolated?
The student obtained an optically active product after exposing r-1-bromo-2-propanol to sodium hydroxide. The proton NMR of the product is also provided.
The structure of the compound that the student isolated is:CH3 – CH (OH) – CH2 – Br
In the given compound r-1-bromo-2-propanol, the bromine atom is attached to the first carbon atom. When this compound is treated with sodium hydroxide, the hydroxide ion attacks the carbon atom attached to the bromine atom and forms a negatively charged oxygen atom.This negatively charged oxygen atom further attracts the proton of the adjacent carbon atom (second carbon atom). After the transfer of a proton, the negatively charged oxygen atom gets neutralized and an alkoxide ion is formed. This alkoxide ion further attacks the third carbon atom and the compound is formed.In the compound obtained, there is no plane of symmetry or center of symmetry. This makes the compound optically active.
Further, the proton NMR shows the presence of a singlet at chemical shift 1.1 ppm due to the presence of three equivalent methyl groups. The presence of a broad singlet at chemical shift 3.7 ppm is due to the presence of –OH group. The singlet at chemical shift 4.2 ppm is due to the presence of –CH2 group.The structure of the compound that the student isolated is CH3 – CH (OH) – CH2 – Br.
Learn more about optically active products and proton NMR here, https://brainly.com/question/24215073
#SPJ11
what is the concentration of a 53.65 ml solution of hbr that is completely titrated by 33.50 ml of a 0.200 m naoh solution?
The concentration of the HBr solution is 0.125 M.
The given solution is a 53.65 ml solution of HBr that is completely titrated by 33.50 ml of a 0.200 M NaOH solution.
This implies that all of the HBr present in the solution is neutralized by NaOH, and therefore, the number of moles of HBr is equal to the number of moles of NaOH.
The balanced chemical equation for the reaction:HBr(aq) + NaOH(aq) → NaBr(aq) + H2O(l)The stoichiometric ratio of HBr to NaOH in this reaction is 1:1.
This means that one mole of HBr reacts with one mole of NaOH to form one mole of NaBr and one mole of water.
We can use the given information to determine the number of moles of NaOH that were required to neutralize the HBr. The molarity of the NaOH solution is given as 0.200 M.
This means that there are 0.200 moles of NaOH in every liter of solution.
Therefore, the number of moles of NaOH used in the titration is:moles of NaOH = molarity × volume in liters= 0.200 M × (33.50/1000) L= 0.0067 mol
Since the stoichiometric ratio of HBr to NaOH is 1:1, the number of moles of HBr that were neutralized by the NaOH is also 0.0067 mol.
This means that the concentration of the HBr solution can be calculated as follows:concentration of HBr = moles of HBr / volume of HBr solution in liters= 0.0067 mol / (53.65/1000) L= 0.125 M
to know more about solution refer here:
https://brainly.com/question/30665317#
#SPJ11
Use the given standard enthalpies of formation to determine the heat of reaction of the following reaction:
Note Heat of formation of elements is 0.
AH° N₂H₂ (1) = +50.6 kJ/mole
AH, H₂0 (1) = -285.9 kJ/mole
AH° CO₂ (g) = -393.5 kJ/mole
C3H6O (1) = -249.5 kJ/mole
CS₂ (g) = +177.4 kJ/mole
AH SO₂ (g) = -296.8 kJ/mole
AH° C6H12 (1) = -156.4 kJ/mole
AH
AH
1. N₂H4(1) + O₂(g) →N₂(g) + 2 H₂O(1)
1. The heat of reaction for the given chemical equation is -522.1 kJ/mole.
2. The heat of reaction for the given chemical equation is -3327.1 kJ/mole.
3. The heat of reaction for the given chemical equation is -1161.5 kJ/mole.
How did we get these values?1. N₂H₄(1) + O₂(g) →N₂(g) + 2 H₂O(1)
The balanced chemical equation for the reaction is:
N₂H₄(1) + O₂(g) → N₂(g) + 2 H₂O(1)
To find the heat of reaction (ΔH°rxn) for this reaction, we need to calculate the difference between the standard enthalpies of formation of the products and reactants, multiplied by their respective stoichiometric coefficients:
ΔH°rxn = ΣnΔH°f(products) - ΣmΔH°f(reactants)
where n and m are the stoichiometric coefficients of the products and reactants, respectively, and ΔH°f is the standard enthalpy of formation.
Using the given standard enthalpies of formation, we get:
ΔH°rxn = [0 - 2(-285.9 kJ/mole) + 50.6 kJ/mole] - [1(0) + 1(-50.6 kJ/mole)]
ΔH°rxn = -572.7 kJ/mole + 50.6 kJ/mole
ΔH°rxn = -522.1 kJ/mole
Therefore, the heat of reaction for the given chemical equation is -522.1 kJ/mole.
2. C3H6O(1) + 4 O₂(g) → 3 CO₂(g) + 3 H₂O(1)
The balanced chemical equation for the reaction is:
C3H6O(1) + 4 O₂(g) → 3 CO₂(g) + 3 H₂O(1)
To find the heat of reaction (ΔH°rxn) for this reaction, we need to calculate the difference between the standard enthalpies of formation of the products and reactants, multiplied by their respective stoichiometric coefficients:
ΔH°rxn = ΣnΔH°f(products) - ΣmΔH°f(reactants)
where n and m are the stoichiometric coefficients of the products and reactants, respectively, and ΔH°f is the standard enthalpy of formation.
Using the given standard enthalpies of formation, we get:
ΔH°rxn = [3(-393.5 kJ/mole) + 3(-285.9 kJ/mole)] - [1(-249.5 kJ/mole) + 4(0)]
ΔH°rxn = -3576.6 kJ/mole + 249.5 kJ/mole
ΔH°rxn = -3327.1 kJ/mole
Therefore, the heat of reaction for the given chemical equation is -3327.1 kJ/mole.
3. CS₂(1) + 3 O₂(g) → CO₂(g) + 2 SO₂(g)
The balanced chemical equation for the reaction is:
CS₂(1) + 3 O₂(g) → CO₂(g) + 2 SO₂(g)
To find the heat of reaction (ΔH°rxn) for this reaction, we need to calculate the difference between the standard enthalpies of formation of the products and reactants, multiplied by their respective stoichiometric coefficients:
ΔH°rxn = ΣnΔH°f(products) - ΣmΔH°f(reactants)
where n and m are the stoichiometric coefficients of the products and reactants, respectively.
Using the given standard enthalpies of formation, we get:
ΔH°rxn = [1(-393.5 kJ/mole) + 2(-296.8 kJ/mole)] - [1(177.4 kJ/mole) + 1(0)]
ΔH°rxn = -984.1 kJ/mole - 177.4 kJ/mole
ΔH°rxn = -1161.5 kJ/mole
Therefore, the heat of reaction for the given chemical equation is -1161.5 kJ/mole.
learn more about heat of reaction: https://brainly.com/question/11631046
#SPJ1
Consider the following stoichiometric combustion of ethane. For a case with 200% theoretical air, how many kmol of air would be required per kmol of fuel?
C2H6 + 3.5(O2 + 3.76N2) --> 2CO2 + 3H2O + 13.16N2
select one blew
a. 3.5 kmol air
b. 7 kmol air
c. 16.7 kmol air
d. 33.3 kmol air
For a case with 200% theoretical air, 33.3 kmol of air would be required per kmol of fuel. It is given that the stoichiometric combustion of ethane isC2H6 + 3.5(O2 + 3.76N2) → 2CO2 + 3H2O + 13.16N2As per the equation, it takes 3.5 kmol of (O2 + 3.76N2) to burn 1 kmol of ethane, and for 200% theoretical air, 7 kmol of (O2 + 3.76N2) would be used. Hence, option (d) is correct.
Therefore, 2 kmol of ethane would require 7 kmol of (O2 + 3.76N2). We can calculate the number of kmol of air needed per kmol of fuel as follows:Number of kmol of air per kmol of fuel = (Number of kmol of (O2 + 3.76N2) per kmol
of fuel) / 0.21Number of kmol of air per kmol of fuel = (7/2) / 0.21Number of kmol of air per kmol of fuel = 16.67 / 0.21 = 79.29 ≈ 33.3 kmol of airHence, option (d) is correct.
For more similar questions on topic stoichiometric combustion
brainly.com/question/14077954
#SPJ11
which of the following is not a strong acid? select the correct answer below: hydrobromic acid hydroiodic acid hydrochloric acid hydrofluoric acid
Hydrofluoric acid is not a strong acid.
Hydrofluoric acid (HF) is a weak acid because it does not completely dissociate in water to form [tex]H^+[/tex] ions. In water, HF undergoes a partial dissociation to form [tex]H^+[/tex] and [tex]F^-[/tex] ions according to the following equilibrium:
[tex]HF + H_2O[/tex] ⇌ [tex]H_3O^+ + F^-[/tex]
This equilibrium favors the reactant side, meaning that most of the HF molecules remain as HF in solution, with only a small percentage dissociating to form [tex]H^+[/tex] ions.
In contrast, hydrochloric acid (HCl), hydrobromic acid (HBr), and hydroiodic acid (HI) are strong acids because they completely dissociate in water to form [tex]H^+[/tex] ions. These strong acids have weak conjugate bases, which makes the acid dissociation reaction highly favorable.
The strength of an acid is related to its tendency to donate a proton ( [tex]H^+[/tex] ) in water. The stronger the acid, the more readily it donates [tex]H^+[/tex] ions.
Therefore, hydrochloric acid, hydrobromic acid, and hydroiodic acid are stronger acids than hydrofluoric acid.
To learn more about acids refer: https://brainly.com/question/14174495
#SPJ11