Answers
We will have the following:
neutral object becomes charged by losing electrons.
Related Questions
A 244 kg motorcycle is travelling with aspeed of 14.7 m-s-1A) Calculate the kinetic energy (in J) of themotorcycle.B) If the speed of the motorcycle is increasedby a factor of 1.6, by what factor does itskinetic energy change?C) Calculate the speed (in m-s-1) of themotorcycle if its kinetic energy is 1/3 of thevaluefound in (a).
Answers
Given data:
* The mass of the motorcycle is m = 244 kg.
* The speed of the motorcycle is u = 14.7 m/s.
Solution:
(A). The kinetic energy of the motorcycle is,
[tex]K_1=\frac{1}{2}mu^2[/tex]Substituting the known values,
[tex]\begin{gathered} K_1=\frac{1}{2}\times244\times(14.7)^2_{} \\ K_1=26362.98\text{ J} \end{gathered}[/tex]Thus, the value of kinetic energy is 26362.98 J.
(B). If the speed of the motorcycle is increased by a factor of 1.6,
[tex]\begin{gathered} v=14.7\times1.6 \\ v=23.52\text{ m/s} \end{gathered}[/tex]Thus, the kinetic energy of the motorcycle becomes,
[tex]\begin{gathered} K_2=\frac{1}{2}mv^2 \\ K_2=\frac{1}{2}\times244\times(23.52)^2 \\ K_2=67489.23\text{ m/s} \end{gathered}[/tex]Dividing K_2 by K_1,
[tex]\begin{gathered} \frac{K_2}{K_1}=\frac{67489.23}{26362.98} \\ \frac{K_2}{K_1}=2.56 \end{gathered}[/tex]Thus, the kinetic energy is increased by the factor of 2.56.
(C). The 1/3 of the kinetic energy in the first part is,
[tex]\begin{gathered} K=\frac{1}{3}\times K_1 \\ K=\frac{1}{3}\times26362.98 \\ K=8787.66\text{ J} \end{gathered}[/tex]Thus, the speed of the motorcycle with the kinetic energy K is,
[tex]\begin{gathered} K=\frac{1}{2}mv^2_{}_{} \\ 8787.66=\frac{1}{2}\times244\times v^2 \\ 8787.66=122\times v^2 \end{gathered}[/tex]By simplifying,
[tex]\begin{gathered} v^2=\frac{8787.66}{122} \\ v^2=72.03 \\ v\approx8.5\text{ m/s} \end{gathered}[/tex]Thus, the speed of the motorcycle is 8.5 m/s.
An interesting question is “In what direction is the dot (representing a particle in the medium)moving at the instant shown above?” The correct answer is “_______”. The way to understandthat is to imagine the pulse an instant later. The wave will have moved a bit to the right.Therefore, since the particle is still on the wave, and can only move up or down, it must be______.
Answers
We will have the following:
The correct answer is vertically.
The way to understand that is to image the pulse an instant later. The wave will have moved a bit to the right. Therefore, since the particle is still on the wav, and can only move up or down, it must be lower.
what is the general importance of water?
Answers
Based on the circuit voltage and the wattage consumption,determine the approximate ampere rating of the followingappliances. Remember amps = watts divided by voltage.a = w÷ VRound to the nearest whole amp.1. AC Compressor on a 240 volt line and using 5,000 watts, amps =_____2. baseboard heater on a 120 volt line and using 1,200 watts, amps =_____3. vacuum cleaner on a 120 volt line and using 500 watts, amps =______4. blender on a 115 volt line and using 300 watts, amps5. toaster on a 120 volt line using 1,100 watts, amps =_____
Answers
Given:
1.
The voltage of AC compressor is V = 250 V
The power of the AC compressor is P = 5000 W
2.
The voltage of the baseboard heater is V = 120 V
The power of the baseboard heater is P = 1200 W
3.
The voltage of the vacuum cleaner is V = 120 V
The power of the vacuum cleaner is P = 500 W
4.
The voltage of the blender is V = 115 V
The power of the blender is P = 300 W
5.
The voltage of the toaster is 120 V
The power of the toaster is P = 1100 W
Required:
1. The approximate ampere rating of the AC compressor.
2. The approximate ampere rating of the baseboard heater.
3. The approximate ampere rating of the vacuum cleaner.
4. The approximate ampere rating of the blender.
5. The approximate ampere rating of the toaster.
Explanation:
1. The approximate ampere rating of the AC compressor can be calculated as
[tex]\begin{gathered} I\text{ = }\frac{P}{V} \\ =\frac{5000}{240} \\ =20.833\text{ A} \\ \approx21\text{ A} \end{gathered}[/tex]2. The approximate ampere rating of the baseboard heater can be calculated as
[tex]\begin{gathered} I=\frac{1200}{120} \\ =\text{ 10 A} \end{gathered}[/tex]3. The approximate ampere rating of the vacuum cleaner can be calculated as
[tex]\begin{gathered} I\text{ = }\frac{500}{120} \\ =4.2\text{ A} \\ \approx4\text{ A} \end{gathered}[/tex]4. The approximate ampere rating of the blender can be calculated as
[tex]\begin{gathered} I\text{ =}\frac{300}{115} \\ =2.6\text{ A} \\ \approx3\text{ A} \end{gathered}[/tex]5. The approximate ampere rating of the toaster can be calculated as
[tex]\begin{gathered} I\text{ =}\frac{1100}{120} \\ =9.2\text{ A} \\ \approx\text{ 9 A} \end{gathered}[/tex]Final Answer:
1. The approximate ampere rating of the AC compressor is 21 A.
2. The approximate ampere rating of the baseboard heater is 10 A.
3. The approximate ampere rating of the vacuum cleaner is 4 A.
4. The approximate ampere rating of the blender is 3 A.
5. The approximate ampere rating of the toaster is 9 A.
Two cars in opposite directions were going at 32 mph before a collision. They had a head on inelastic collision, i.e. the two cars stuck together afterward. The common speed of the combined piece right after the collision is 20 mph. The mass of Car 1 was 2,000 lb. Car 2 was heavier. The mass of Car 2 was ____ lb.
Answers
The mass of Car 2 was 3000 lb.
We need to apply the concept of conservation of momentum.
The velocity of both cars= 32mph
Combined velocity = 20mph
Mass of Car 1= 2000 lb
According to the conservation of momentum
M1V1+ M2V2= (M1+M2)
2000x32- (-M2x 32)=20(2000+M2)
64000+32M2=40000 +20M2
24000= 8M2
M2= 3000lb
Therefore the mass of Car 2 is 3000lb.
To know more about the conservation of momentum, click on https://brainly.com/question/22257327
a ball starts from rest. It rolls down a ramp and reaches the ground after 8 seconds. It's final velocity when it reaches the ground is 14.0 meters/second. What is the initial velocity and acceleration?
Answers
A ball starts from rest such that initial velocity, u=0, and final velocity, v = 14 m/s
and the time duration, t = 8 seconds.
To find initial velocity and acceleration, a.
As the ball is at rest, thus initial velocity is zero.
Acceleration is given by the formula,
[tex]a=\frac{v-u}{t}[/tex]Substituting the values in the above equation, we get
[tex]\begin{gathered} a=\frac{14-0}{8} \\ =1.75m/s^2 \end{gathered}[/tex]Hence the acceleration is 1.75 m/s^2
The figure shows a person whose weight is W = 607 N doing push-ups. Find the
normal force exerted by the floor on (a) each hand and (b) each foot, assuming that
the person holds this position.
Answers
The normal force exerted by the floor on each hand is 203.95N and the normal force exerted on each foot is 99.55 N.
Torque is defined as force times the distance from the line of force that is perpendicular to it.
(a) Each hand's typical response is, let's say, N1. For hands, the overall typical response is 2N1.
Balance the torque around the foot now.
torque is applied in a counterclockwise direction
Now ,
2N1 x 1.25 = W x 0.84.
2N1 × 1.25 = 607 × 0.84
N1 = (607 x 0.84)/(2x1.25)
N1 = 203.95N.
(a) The normal response for each foot is, let's say, N2, and the total normal response for feet is 2N2.
Now, distribute torque among the hands.
Anticlockwise torque is equal to clockwise torque.
Now,
2N2 x 1.25 = W x 0.41
2N2 × 1.25 = 607 × 0.41
N2 = (607× 0.41 )/2× 1.25
N2 = 99.55N
Hence,the normal force exerted by the floor on each hand is 203.95N and the normal force exerted on each foot is 99.55 N.
Learn more about torque here :
brainly.com/question/2199910
#SPJ13
A sound wave of wavelength 1.66m at a temperature of 23 C is produced for 2.5 seconds. How far does this wave travel? How many complete waves are emitted in this time interval?
Answers
To find how far it travels, we just have to multiply
[tex]1.66\times2.5=4.15[/tex]It travels 4.15 meters.
During this interval, there are emitted 2.5 waves.
Block A in (Figure 1) has mass 0.900 kg , and block B has mass 3.00 kg . The blocks are forced together, compressing a spring S between them; then the system is released from rest on a level, frictionless surface. The spring, which has negligible mass, is not fastened to either block and drops to the surface after it has expanded. Block B acquires a speed of 1.35 m/s .
Part A: What is the final speed of block A?
Part B: How much potential energy was stored in the compressed spring?
Answers
(a) The final speed of block A is determined as 4.5 m/s.
(b) The potential energy that was stored in the compressed spring is 11.85 J.
What is the final speed of block A?
The final speed of block A is determined by applying the principle of conservation of linear momentum as follows;
Pa = Pb
where;
Pa is the momentum of block APb is the momentum of block Bmv (block A) = mv (block B)
(0.9 kg)(v) = (3 kg)(1.35 m/s)
0.9v = 4.05
v = 4.05/0.9
v = 4.5 m/s
The potential energy stored in the compressed spring is calculated as follows;
Apply the principle of conservation of energy.
U = K.E
where;
K.E is the kinetic energy of the blocksU = ¹/₂mv² (A) + ¹/₂mv² (B)
U = ¹/₂(0.9)(4.5²) + ¹/₂(3)(1.35²)
U = 11.85 J
Thus, the potential energy that was stored in the compressed spring is determined by applying the principle of conservation of energy.
Learn more about linear momentum here: https://brainly.com/question/7538238
#SPJ1
Two ropes support a 15.0 kg load between them. One rope points NW at an angle of 15.0 degrees to the horizontal. Second rope points NE at an angle of 20.0 degrees to the vertical. Determine the magnitude of the tension force in each of the ropes.
Answers
The tension in the first rope is 38.05 N and the tension in the second rope is 138.1 N.
What is the weight of the load?
The weight of the load due to the force of gravity is calculated as follows;
W = mg
where;
m is mass of the loadg is acceleration due to gravityW = 15 kg x 9.8 m/s²
W = 147 N
Since the weight of the load is acting downwards, the tension in each rope is calculated as follows;
The tension in the first rope, T1 = W sinθ
where;
θ is the angle of inclination above the horizontalT1 = 147 sin(15)
T1 = 38.05 N
The tension in the first rope, T2 = W sinθ
where;
θ is the angle of inclination above the horizontal = 90 - 20 = 70⁰T2 = 147 x sin(70)
T2 = 138.1 N
Thus, the tension in each rope is determined by calculating the vertical component of force in each rope.
Learn more about tension in ropes here: https://brainly.com/question/187404
#SPJ1
What does a scientist mean when he or she says that an object is at rest
Answers
Answer:
I does not change position with respect to its surroundings with time
When the buoyant force on an object is equal to or greater than its weight, the object __
Answers
When the buoyant force on an object is equal to or greater than its weight, the object accelerates upwards and floats.
What is buoyant force?
Buoyant force is the upward force exerted on an object that is fully or partly immersed in a fluid.
This upward force is also called Upthrust.
According to Archimedes' principle which states that the buoyant force on an object is equal to the weight of the fluid displaced by the object.
An object will accelerate if its upthrust is greater than its weight, but will reach an upward terminal velocity when upthrust is equal to weight plus drag force.
Thus, when the buoyant force on an object is equal to or greater than its weight, the object accelerates upwards and floats.
Learn more about buoyant force here: https://brainly.com/question/3228409
#SPJ1
a car goes from 32 m/s to a complete stop in 4.8 seconds. calculate the average stopping force of the car if has a mass of 2500 kg
Answers
The average stopping force is 16,500 N
Initial velocity of car (v₁)= 32m/s
Final velocity (v₂) = 0m/s
Time to stop= 4.8 seconds
Mass of car= 2500 kg
we need to apply the concept of laws of motion
Acceleration of car (a)= Change in velocity/time
a= v₂-v₁/t
a= 0-32/4.8
a= -6.6 m/s² ( deceleration)
Force= mass x acceleration
Force= 2500x 6.6
Force= 16500 N
Therefore the average stopping force is 16,500 N.
To know more about force, click on https://brainly.com/question/25239010
Analyze the collision of a baseball with a bat. During which portion of the collision does the baseball’s velocity reach zero?1) before the collision2) during the collision3) one second after the collision4) one-hundredth of a second after the collision
Answers
ANSWER:
2) during the collision
STEP-BY-STEP EXPLANATION:
We have that when a baseball ball collides with a bat, its velocity changes from positive to negative, that is, the ball when hit with an opposing force changes its direction exactly opposite to the initial one.
Therefore, during the collision, at some point in time, the velocity of the ball reaches zero and then finally changes its direction associated with an increase in the velocity of the ball.
Which resistors in the circuit must always have the same current?A.B and CB.A and BC.C and DD.A and D
Answers
ANSWER
D. A and D
EXPLANATION
Two resistors have the same current if they are connected in series. As we can see in the schematic, resistors B and C are connected in parallel, so they don't have the same current - unless they have the same resistance.
Resistors A, D, and the equivalent of the parallel resistors (B and C) are connected in series, so they always have the same current.
Hence, of these options, resistors A and D always have the same current.
Which of the following terms represents the number of waves passing a given point each second?Frequency⊝Wavelength⊝Amplitude⊝Velocity⊝CLEAR ALL
Answers
Frequency is defined as number of waves or vibration per unit time.
Therefore, option (a), frequency is the number of waves passing a given point each second, is the correct choice.
Hey! I really need help with this question please :)
Answers
Answer: B
Explanation:
The formula for calculating the efficiency of a heat engine is expressed as
Efficiency = useful work done/Heat energy supplied x 100
From the information given,
Heat energy supplied = 500
useful work done = 50
Efficiency = 50/500 x 100
Efficiency = 10%
What is the frequency of a photon of EMR with a wavelength of 2.55x10*³m?1.18x1011 Hz8.50x10 12 Hz7.65x105 Hz1.18x105 Hz
Answers
In order to solve this equation, we will need to use the formula
[tex]f=\frac{c}{\lambda}[/tex]where f = frequency, c is the speed of light and lamda is wavelength
c = 3x10^8 m/s
lamda = 2.55x10^-3 m
f = (3x10^8)/(2.55x10^-3) = 1.18x10^11 1/s
What it mean for the brightness of bulbs in parallel if the potential difference across each one is the same as the potential difference across the battery?A. Not enough infoB. All the sameC. Decrease for each oneD. Increase for each one
Answers
B. All the same
Explanation
Total voltage of a parallel circuit has the same value as the voltage across each branch:
in the image, the voltage across R1 is the same as the voltage across R2,
Step 1
Increasing the voltage increases the brightness of the bulb. it means the brigthness depends on the voltage (also the brigthness depends on the current), so as the potential difference is the same, we can conclude the brigthness is the same, In a parallel circuit the voltage for each bulb is the same as the voltage in the circuit. Unscrewing one bulb has no effect on the other bulb.
so the answer is
B. All the same
I hope this helps you
Hafthor bjornson broke the deadlift record in April 2020, lifting 501kg. A) How much weight (in N) did he lift?B) How hard was the floor pushing up on the weights when they were on the floor?
Answers
Given, the mass that Hafthor Bjornson lifted, m=501 kg
A)
The weight is given by the product of the mass and the acceleration due to gravity.
Thus the weight lifted by him is,
[tex]\begin{gathered} W=mg \\ =501\times9.8 \\ =4909.8\text{ N} \end{gathered}[/tex]Thus the weight he lifted is 4909.8 N
B)
When the weight is on the floor the force applied by the floor on the weights is equal to the weight itself. This force is called the normal force.
Thus the force applied by the floor on the weights is 4909.8 N
Car A rear ends Car B, which has twice the mass of A, on an icy road at a speed low enough so that the collision is essentially elastic. Car B is stopped at a light when it is struck. Car A has mass m and speed v before the collision. After the collision.. A)each car has half the impulse of before B)each car has double the impulse of before C)each car have the same impulse D)each car has an impulse in ratio to its mass.
Answers
We are given the following information.
The collision is elastic.
Car B has twice the mass of car A.
Recall that in an elastic collision, the momentum and the kinetic energy are conserved.
Impulse is basically the change in momentum.
Since car B has 2 times the mass of car A, the momentum of car B will be 4 times the momentum of car A.
This means that the impulse of car B will be greater than the impulse of car A.
Option D says that each car has an impulse in ratio to its mass meaning that a car with a larger mass will have a larger impulse and vice versa.
Therefore, we can conclude that after the collision, each car has an impulse in ratio to its mass.
A sample of unknown material weight 900N In air and and 400N when submerged in an alcohol solution with a density of 0.7 g/cm³.What is the density of the material ?
Answers
1.26 g/cm³
ExplanationStep 1
given
[tex]\begin{gathered} F_{g(air)}=900\text{ N} \\ F_{g(alchodol)}=400\text{ N} \\ \rho_{alcohol}=0.7\text{ }\frac{g}{cm^3} \end{gathered}[/tex]unknown; the density of the material, so
[tex]\begin{gathered} F_B=F_{g(air)}-F_{g(alcohol)} \\ F_B=900\text{ N-400 N=500 N} \end{gathered}[/tex]so, the proportion is
the ratio of the force equals the ratio of the density ,so
[tex]\begin{gathered} \frac{F_{g(air)}}{F_B}=\frac{\rho_{material}}{\rho_{alcholol}} \\ replace \\ \frac{900\text{ N}}{500\text{ N}}=\frac{\rho_{material}}{0.7\text{ }\frac{g}{cm^3}} \\ mutliply\text{ both sides by 0.7}\frac{g}{cm^3} \\ \frac{900\text{N}}{500\text{N}}*0.7\text{ }\frac{g}{cm^3}=\frac{\rho_{mater\imaginaryI al}}{0.7\text{\frac{g}{cm^{3}}}}*0.7\frac{g}{cm^3} \\ 1.26\frac{g}{cm^3}=\text{ density of the material } \\ \end{gathered}[/tex]so, the density of the material is
1.26 g/cm³
I hope this helps you
You can hear sound from another room through a door that is slightly open because...the sound refracts as it goes from one room to another.the sound wave reflects off the air in the doorway.the sound diffracts as it goes through the opening.the sound is polarized as it goes through the narrow opening.
Answers
when sound wave go from small passages like the edge of a wall or from the slit of open door the sound wave diffracts.
So the 3rd option is correct option.
Which statement best describes Earth's oceans?A. The waters of Earth's five major oceans rarely mix with oneanother.B. More than 95% of the water in the hydrosphere is found in oceans.C. The oceans contain almost all of Earth's freshwaterD. Oceans cover about 25% of Earth's surface.
Answers
From the given list, let's select the best statement that describes Earth's oceans.
The oceans of the earth are the principal component of the Earth's hydrosphere. The major oceans are the pacific ocean, atlantic ocean, indian ocean, souther ocean and the Arctic ocean.
The ocean covers more than 70% of the surface of the Earth and 97% of the Earth's water.
More than 95% of the Earth's water are found in the oceans.
The oceans contain only about 3% of the Earth's freshwater.
The waters of the Earth's five major oceans are connected with one another.
Therefore, the best statement which best describes the Earth's oceans is:
More than 95% of the water in the hydrosphere is found in oceans.
ANSWER:
B. More than 95% of the water in the hydrosphere is found in oceans.
If an astronaut weighs 148 N on the Moon and 893 N on Earth, then what is his mass on Earth?
_____ kg
Answers
The mass on Earth is 91.1 kg
The weight on the Moon is 148 N
The weight on the Earth is 893 N
We need to apply the concept of force.
Weight=massxacceleartion
893=mass of man x acceleration of gravity on earth
893= mass x 9.8
mass = 91.1 kg
Therefore, the mass on earth is 91.1 kg.
To know more about the concept of force, click on https://brainly.com/question/12970081
Answer:
the mass on Earth is 91.1 kg
Explanation:
Question 17 of 25A conductor is a material that:O A. allows easy movement of charge.B. is never made of metal,C. hinders the passage of electricity.O D. is made of glass.
Answers
From the given list, let's select the statement that best defines a conductor.
A conductor can be defined as any material that allows the flow of electric charge.
Examples of conductors are:
• Copper
,• Aluminium
,• Silver...
Therefore, the best statement that defines a conductor is that a conductor is a material that allows easy movement of charge.
• Option B is wrong because most conductors are made of metal.
,• Option C is wrong because it is an ,insulator ,hinders the passage of electricity.
,• Option D is wrong because a glass is an insulator not a conductor.
ANSWER:
A. allows easy movement of charge
a cheetah can accelerate from rest to a speed of 30.0 m/s in 7.00s. wht is its acceleration?
Answers
The given value of the speed of cheetah is,
[tex]v=30ms^{-1}[/tex]The time during the speed v is,
[tex]t=7\text{ s}[/tex]The relation between the acceleration, speed and time is,
[tex]a=\frac{v}{t}[/tex]Substituting the known values,
[tex]\begin{gathered} a=\frac{30}{7} \\ a=4.3ms^{-2} \end{gathered}[/tex]Thus, the value of the acceleration is 4.3 meter per second squared.
Answer:
30×7=210m it is easyokok
A player hits a ball 45 degrees above the horizontal 1.3m above the ground. It clears a 3m wall 130m away. What is the minimum initial velocity the ball can clear the wall?
Answers
Explanation:
I had this question last year, let me check my book if i could find it.
A person is at the top of a tower. He takes a segment of a string which measures 30 cm long when at rest and hooks his 3 kg sword at the end of it. The spring extends to 35 cm long. He will use this spring to get to the ground. What is the spring constant of the spring, and how much of the spring (measured at equibilirum) does he need in order to have a net force of 0 upon himself when he touches the ground? Assume he hangs the spring from a hook located exactly 30 m above the ground. Be certain to draw a free body diagram of the forces on him the moment he hits the ground.
Answers
The given problem can be exemplified in the following diagram:
To determine the constant of the spring we can use Hook's law, which is the following:
[tex]F=k\Delta x[/tex]Where:
[tex]\begin{gathered} F=\text{ force on the string} \\ k=\text{ string constant} \\ \Delta x=\text{ difference in length} \end{gathered}[/tex]Now, we solve for "k" by dividing both sides by the difference in length:
[tex]\frac{F}{\Delta x}=k[/tex]The force on the string is equivalent to the weight attached to it. The weight is given by:
[tex]W=mg[/tex]Where:
[tex]\begin{gathered} W=\text{ weight} \\ m=\text{ mass} \\ g=\text{ acceleration of gravity} \end{gathered}[/tex]Substituting in the formula for the constant of the spring we get:
[tex]\frac{mg}{\Delta x}=k[/tex]Now, we substitute the values:
[tex]\frac{(3kg)(9.8\frac{m}{s^2})}{35\operatorname{cm}-30\operatorname{cm}}=k[/tex]Before solving we need to convert the centimeters into meters. To do that we use the following conversion factor:
[tex]100\operatorname{cm}=1m[/tex]Therefore, we get:
[tex]\begin{gathered} 35\operatorname{cm}\times\frac{1m}{100\operatorname{cm}}=0.35m \\ \\ 30\operatorname{cm}\times\frac{1m}{100\operatorname{cm}}=0.30m \end{gathered}[/tex]Substituting in the formula we get:
[tex]\frac{(3kg)(9.8\frac{m}{s^2})}{0.35m-0.30m}=k[/tex]Solving the operations:
[tex]588\frac{N}{m}=k[/tex]Therefore, the constant of the spring is 588 N/m.
The Diagram shows the forces involved as a student slides a water bottle across the desk in front of them to their friend. Based on the image, in which direction is there friction? (ignore the selected answer it’s random)
Answers
Answer:
Left.
Step-by-step explanation:
The force of friction opposes the motion of an object, causing moving objects to lose energy and slow down. Therefore, the friction goes to the left.