when 0.0507 moles of iron(iii) chloride are dissolved in enough water to make 480 milliliters of solution, what is the molar concentration of chloride ions? answer in units of mol/l.

Answers

Answer 1

The molar concentration of chloride ions in the solution is 0.3169 mol/L

To find the molar concentration of chloride ions in the solution, we need to consider the mole-to-ion ratio of iron(III) chloride (FeCl₃) and then use the volume of the solution.

1 mole of FeCl₃ dissociates into 3 moles of chloride ions (Cl⁻) in solution. So, for 0.0507 moles of FeCl₃, the number of moles of Cl⁻ ions will be:

0.0507 moles FeCl₃ × (3 moles Cl⁻ / 1 mole FeCl₃) = 0.1521 moles Cl⁻

Now, we have 480 milliliters of solution, which is equivalent to 0.480 liters. To find the molar concentration of chloride ions, divide the moles of Cl⁻ by the volume of the solution in liters:

0.1521 moles Cl⁻ / 0.480 L = 0.3169 mol/L

So, the molar concentration of chloride ions in the solution is 0.3169 mol/L.

Know more about   molar concentration   here:

https://brainly.com/question/26255204

#SPJ11


Related Questions

A solution has a concentration of 3.0 M and a volume of 0.20 L. If the solution is diluted to 4.0 L, what is the new concentration, in molarity?
Your answer should have two significant figures.

Answers

Answer:

concentration2 = 0.15 M

Explanation:

The number of moles of solute in the original solution can be calculated as:

moles = concentration × volume
moles = 3.0 M × 0.20 L
moles = 0.60 mol

When this solution is diluted to a final volume of 4.0 L, the number of moles of solute remains constant. This can be expressed using the equation:

moles1 = moles2

where moles1 is the initial number of moles and moles2 is the final number of moles.

Thus,

moles1 = moles2
0.60 mol = concentration2 × 4.0 L

Solving for concentration2 gives:

concentration2 = moles2 / volume2
concentration2 = 0.60 mol / 4.0 L
concentration2 = 0.15 M

Therefore, the new concentration of the diluted solution, to two significant figures, is 0.15 M.

A respiratory pigment that requires a relatively low O2 partial pressure for loading has ______ affinity for O2. a) a low b) a high c) no d) a variable.

Answers

A respiratory pigment that requires a relatively low [tex]O_2[/tex] partial pressure for loading has a high affinity for [tex]O_2[/tex]. Thus, the correct answer is an option (a).

Since the respiratory pigment requires low partial pressure of the gas, it has more affinity for the gas. As when compared to other pigments, it will more easily load the gas.

Affinity is defined as the degree to which a substance tends to combine with another and in this case, it is used to describe the degree to which the gas tends to combine with a respiratory pigment.

Respiratory pigment such as Myoglobin has a higher affinity than Haemoglobin to load oxygen.

Learn more about Respiratory Pigments:

https://brainly.com/question/31467554

#SPJ4

What is the difference between a bacteria cell and a
human nervous cell?

Answers

most bacteria have flagellum, also nerve cells are larger

an a Use the You need to make ar solid barium sulfide should you add?

Answers

To make solid barium sulfide, you would need to react barium metal with elemental sulfur. The balanced chemical equation for this reaction is:

Ba(s) + S(s) → BaS(s)

To carry out this reaction, you would need to add excess sulfur to the barium metal. This ensures that all the barium is consumed in the reaction, and no excess barium remains. The excess sulfur can be removed by washing the product with a suitable solvent.

It is important to note that the reaction between barium and sulfur can be exothermic, releasing heat and potentially causing a fire or explosion. Therefore, appropriate safety precautions, such as wearing gloves and eye protection and working in a well-ventilated area, should be taken when carrying out this reaction.

Learn more about barium sulfide,

https://brainly.com/question/18402799

#SPJ4

To make a solid barium sulfide (BaS) you would need to add sulfur (S) to barium (Ba) in a stoichiometric ratio of 1:1. This means that for every one mole of barium, you would need one mole of sulfur.

The reaction can be represented by the following chemical equation:

Ba + S → BaS

To carry out this reaction, you could start with a sample of metallic barium and add elemental sulfur powder to it, in a ratio of 1:1 by mole. The reaction between the two elements will produce solid barium sulfide.

It is important to note that this reaction can be highly exothermic, so appropriate safety precautions should be taken. Additionally, barium sulfide is a toxic and reactive compound, and should be handled with care.

For more question on barium sulfide click on

https://brainly.com/question/31013085

#SPJ11

the structures of d-gulose and d-psicose are shown above. what test could be used to distinguish between solutions of these two carbohydrates? explain your answer by predicting the results of the test for each sugar.

Answers

a small amount of Tollens' reagent (ammoniacal silver nitrate) is added to the sugar solution and the mixture is heated. If a reducing sugar is present, it will reduce the silver ions in the Tollens' reagent to metallic silver, which will form a silver mirror on the inside of the test tube.

Based on the structures of D-gulose and D-psicose, it can be predicted that both sugars will give a positive result in the Tollens' test because they both have an aldehyde group that can act as a reducing agent. However, the intensity of the reaction may differ for each sugar.

D-gulose has an aldehyde group at carbon 1, which is in the linear form of the sugar, while D-psicose has an aldehyde group at carbon 2. Since D-gulose can easily convert to its linear form, it is expected to give a stronger positive result in the Tollens' test compared to D-psicose, which may show a weaker positive result due to the steric hindrance of the bulky ketone group at carbon 3.

In summary, the Tollens' test can be used to distinguish between solutions of D-gulose and D-psicose by observing the intensity of the silver mirror formed. D-gulose is expected to give a stronger positive result due to its ability to convert to the linear form, while D-psicose may show a weaker positive result due to steric hindrance.

Learn more about aldehyde  here:

https://brainly.com/question/30478354

#SPJ11

at a certain temperature the solubility of lead(ii) iodide is 0.064 g/100 ml. what is the solubility product of lead(ii) iodide at this temperature? provide your answer rounded to 2 significant figures.

Answers

The solubility product (Ksp) of a substance is a measure of the maximum solubility of that substance in a given solution. It is calculated as the product of the molar concentrations of the ions present in the solution.

In the case of lead(II) iodide, the Ksp can be calculated as the product of the molar concentrations of Pb2+ and I− ions present in the solution.

At the given temperature, the solubility of lead(II) iodide is 0.064 /100 ml. Therefore, the molar concentrations of Pb2+ and I− ions in the solution would be 0.064/100 ml divided by the molar mass of lead(II) iodide (364/mol). This gives a Ksp of 4.07 x 10-9, which can be rounded to 4.1 x 10-9. This is the solubility product of lead(II) iodide at the given temperature.

In summary, the solubility product of lead(II) iodide at a certain temperature is 4.1 x 10-9 when rounded to two significant figures.

Know more about Molar concentrations here

https://brainly.com/question/15532279#

#SPJ11

explain why the amide nitrogen is much less reactive as a base towards aqueous acids than the alkylamine nitrogen. how does this experiment illustrate this?

Answers

The amide nitrogen is much less reactive as a base towards aqueous acids than the alkylamine nitrogen due to the presence of the carbonyl group adjacent to the nitrogen in the amide.

This carbonyl group withdraws electron density from the nitrogen, making it less basic and less likely to accept a proton from an aqueous acid. In contrast, the alkylamine nitrogen has no such electron-withdrawing group, and thus is more basic and more likely to accept a proton from an aqueous acid.
An experiment that illustrates this difference in reactivity is the acid-base titration of an amide and an alkylamine with hydrochloric acid. The amide would require a stronger acid and a longer titration time to reach its equivalence point, indicating its lower reactivity as a base towards aqueous acids. On the other hand, the alkylamine would require a weaker acid and a shorter titration time to reach its equivalence point, indicating its higher reactivity as a base towards aqueous acids.

Learn more about amide nitrogen here: brainly.com/question/30724866

#SPJ11

Help what's the answer?

Answers

The partial pressure of carbon dioxide in the flask is 7.10 atm and the total pressure in the flask is 11.25 atm.

What is ideal gas law?

The ideal gas law is a fundamental law of physics that describes the behavior of ideal gases under various conditions. It is expressed mathematically as PV = nRT, where P is the pressure of the gas, V is its volume, n is the number of moles of gas, R is the ideal gas constant, and T is the absolute temperature of the gas in Kelvin.

To find the partial pressure of carbon dioxide and total pressure in the flask, we need to use the ideal gas law:

PV = nRT

First, we need to calculate the number of moles of each gas:

nO₂ = mO₂ / MM(O₂) = 3.64 g / 32.00 g/mol = 0.1135 mol

nCO₂ = mCO₂/ MM(CO₂) = 8.53 g / 44.01 g/mol = 0.1937 mol

where m is the mass of the gas, and MM is the molar mass of the gas.

Next, we can calculate the total number of moles of gas in the flask:

ntotal = nO₂ + nCO₂ = 0.1135 mol + 0.1937 mol = 0.3072 mol

The total pressure in the flask can be calculated using the ideal gas law:

Ptotal = ntotalRT / V

where R = 0.08206 L·atm/K·mol is the gas constant.

The temperature needs to be converted to Kelvin:

T = 38°C + 273.15 = 311.15 K

Substituting the values, we get:

Ptotal = (0.3072 mol)(0.08206 L·atm/K·mol)(311.15 K) / 8.39 L

= 11.25 atm

Therefore, the total pressure in the flask is 11.25 atm.

To find the partial pressure of carbon dioxide, we need to use the mole fraction of carbon dioxide:

XCO₂ = nCO₂ / ntotal

Substituting the values, we get:

XCO₂ = 0.1937 mol / 0.3072 mol = 0.6309

The partial pressure of carbon dioxide can be calculated using Dalton's law of partial pressures:

PCO₂  = XCO₂ Ptotal

Substituting the values, we get:

PCO₂  = 0.6309 × 11.25 atm

= 7.10 atm

Therefore, the partial pressure of carbon dioxide in the flask is 7.10 atm.

Learn more about pressure here:

https://brainly.com/question/12971272

#SPJ1

Solid sodium chloride decomposes into chlorine gas and solid sodium .
what is the balanced chemical equation of this please help im stuck thanks

Answers

2NaCl --> 2Na + Cl2 but I have never seen something this reaction happening

the hydration of ion: what interactions are at work in an aqueous salt solution to promote hydration?

Answers

The most important interaction is between the ions and the water molecules. There are also electrostatic interactions between the ions and the water molecules in aqueous salt solution.

In an aqueous salt solution, there are several interactions at work to promote hydration of ions. The most important interaction is between the ions and the water molecules. When the salt is dissolved in water, the water molecules surround the ions, forming hydration shells. These shells help to stabilize the ions and prevent them from coming into contact with each other.

The strength of the hydration interaction between an ion and a water molecule depends on the charge and size of the ion. Small ions with high charges, such as Na+ and Mg2+, have a strong interaction with water molecules because they can form more intimate contacts with water molecules. On the other hand, large ions with low charges, such as Cl- and SO42-, have weaker hydration interactions because they cannot form as many intimate contacts with water molecules.

In addition to the hydration interaction, there are also electrostatic interactions between the ions and the water molecules. These interactions occur because the ions have charges, which can interact with the partial charges on the water molecules. The strength of the electrostatic interaction depends on the charge of the ion and the distance between the ion and the water molecule.

Overall, the hydration of ions in an aqueous salt solution is a complex process that involves both hydration and electrostatic interactions. These interactions are crucial for stabilizing the ions in solution and preventing them from coming into contact with each other.

Learn more about aqueous salt solution here:

https://brainly.com/question/9947161

#SPJ11

The hydration of ions in an aqueous salt solution is promoted through ion-dipole interactions, hydrogen bonding, and electrostatic forces. These interactions help to stabilize the hydrated ions in the solution.

What interactions promote hydration of a solution?

The hydration of ions in an aqueous salt solution involves several interactions to promote hydration. These interactions include:

1. Ion-dipole interactions: These are the attractive forces between the charged ions (cations and anions) of the dissolved salt and the polar water molecules. The positive end (hydrogen atoms) of water molecules surround the negative ions, while the negative end (oxygen atom) of water molecules surround the positive ions.

2. Hydrogen bonding: This is a specific type of dipole-dipole interaction that occurs between the hydrogen atom of a polar molecule (such as water) and an electronegative atom (like oxygen). In an aqueous salt solution, hydrogen bonding can occur between water molecules surrounding the ions.

3. Electrostatic forces: These forces occur between charged particles and help to stabilize the hydration shell around the dissolved ions.

To know more about Intermolecular Forces:

https://brainly.com/question/30897286

#SPJ11

if 10 grams of aluminum reacts with 4 grams of oxygen, what is the expected grams of product?

Answers

Expected grams of aluminum oxide product from the given masses of reactants are 18.93 g.

What is aluminum?

Aluminum is chemical element with symbol Al and atomic number is 13.

4Al + 3O₂ → 2Al₂O₃

10 g Al × 1 mol Al / 26.98 g Al = 0.371 mol Al

4 g O₂ × 1 mol O₂ / 32.00 g O₂ = 0.125 mol O₂

We determine the limiting reactant by comparing the mole ratios of aluminum and oxygen in the balanced equation and reactant that produces  smaller amount of product is limiting reactant. In this case, aluminum is the limiting reactant because it produces only 0.1855 moles of aluminum oxide, which is less than the 0.25 moles of aluminum oxide produced by the oxygen:

0.371 mol Al × 2 mol Al₂O₃ / 4 mol Al = 0.1855 mol Al₂O₃

0.125 mol O₂ × 2 mol Al₂O₃ / 3 mol O2 = 0.2083 mol Al₂O₃

0.1855 mol Al₂O₃ × 101.96 g/mol = 18.93 g Al₂O₃

Therefore, expected grams of aluminum oxide product from the given masses of reactants are 18.93 g.

To know more about aluminum, refer

https://brainly.com/question/27859211

#SPJ1

for the previous light of 671 nm, if a light emitted 0.50 moles of this photon, what is the energy of this light?

Answers

The energy of the light emitted by 0.50 moles of photons with a wavelength of 671 nm is approximately 8.92 * 10^4 Joules.

Let's understand this in detail:

To find the energy of light emitted by 0.50 moles of photons with a wavelength of 671 nm, we can follow these steps:

1. Convert the wavelength to meters: 671 nm * (1 meter / 1,000,000,000 nm) = 6.71 * 10^-7 meters.

2. Calculate the energy of one photon using the Planck's equation: E = hf, where E is energy, h is Planck's constant (6.626 * 10^-34 Js), and f is frequency.

3. To find the frequency, we use the speed of light (c) equation: c = λf, where λ is the wavelength. Rearrange the equation to find the frequency: f = c / λ.

4. Substitute the values and calculate the frequency: f = (3 * 10^8 m/s) / (6.71 * 10^-7 m) = 4.47 * 10^14 Hz.

5. Now, calculate the energy of one photon: E = (6.626 * 10^-34 Js) * (4.47 * 10^14 Hz) = 2.96 * 10^-19 J.

6. Finally, find the energy of 0.50 moles of photons: Energy = (0.50 moles) * (6.022 * 10^23 photons/mole) * (2.96 * 10^-19 J/photon) = 8.92 * 10^4 J.

So, the energy of the light emitted by 0.50 moles of photons with a wavelength of 671 nm is approximately 8.92 * 10^4 Joules.

Learn more about photons: Which of the following could be the energy of a photon in the visible range? https://brainly.com/question/15946945

#SPJ11

The energy of the light emitted by 0.50 moles of photons with a wavelength of 671 nm is approximately 8.93 x [tex]10^4[/tex] J.

To find the energy of the light emitted by 0.50 moles of photons with a wavelength of 671 nm, we can use the following steps:
1. Convert the wavelength to meters: 671 nm = 671 x [tex]10^{(-9)}[/tex] m
2. Calculate the energy of a single photon using Planck's equation: E = h * c / λ, where E is the energy, h is the Planck's constant (6.626 x [tex]10^{(-34)}[/tex] Js), c is the speed of light (3.0 x [tex]10^8[/tex] m/s), and λ is the wavelength in meters.
3. Calculate the total energy of 0.50 moles of photons by multiplying the energy of a single photon by Avogadro's number (6.022 x [tex]10^{(23)}[/tex] particles/mole) and the number of moles (0.50).
Step-by-step calculation:
1. λ = 671 nm = 671 x [tex]10^{(-9)}[/tex] m
2. E (single photon) = (6.626 x [tex]10^{(-34)}[/tex] Js) * (3.0 x [tex]10^8[/tex] m/s) / (671 x [tex]10^{(-9)}[/tex] m) = 2.967 x [tex]10^{(-19)}[/tex] J
3. Total energy = E (single photon) * 0.50 moles * (6.022 x [tex]10^{(23)}[/tex] particles/mole) = (2.967 x [tex]10^{(-19)}[/tex] J) * 0.50 * (6.022 x [tex]10^{(23)}[/tex]) = 8.93 x [tex]10^4[/tex] J
So, the energy of the light emitted by 0.50 moles of photons with a wavelength of 671 nm is approximately 8.93 x 10^4[tex]10^4[/tex] J.

To learn more about moles, refer:-

https://brainly.com/question/26416088

#SPJ11

During chemistry class, Carl performed several lab test on two white solids. The results of three tests are seen in the data table. Based on this data, Carl has concluded that substance B must have ______ bonds.

Answers

Carl has concluded that substance have ionic bonds.

How can you tell whether or not a covalent bond is polar?

The usual guideline is that a bond is considered nonpolar if the difference in electronegativities is less than or equal to 0.4, while there are no hard and fast rules, and polar if the difference is greater.

What sort of covalent bond has a non-polar example?

The bond between two hydrogen atoms is an illustration of a nonpolar covalent bond since they equally share electrons. The bond between two chlorine atoms is another illustration of a nonpolar covalent bond since they also equally share electrons.

To know more about ionic bonds visit:-

https://brainly.com/question/11527546

#SPJ1

Question:

During che distry class, Cort performed several lab tests on two white solids. The results of three tests are seen in the data table. Based on this data, Carl has concluded that substance have ________ bonds.

A) covalent

B) diatomic

C) ionic

D) metallic

Calculate the freezing point and the boiling point of each of the following aqueous solutions. (Assume complete dissociation. Assume that water freezes at 0.00°C and boils at 1.86°C 100.000°C. K = 0.51°C Kb = molal molal a. 0.060 m MgCl2 T = °C T = °C b. 0.060 m FeCl3 T = °C To = °C

Answers

The freezing and boiling points of 0.060 m [tex]MgCl_2[/tex] are -0.33°C and 100.09 °C. 0.060 m  [tex]FeCl_3[/tex] has the following freezing and boiling points of -0.44°C and 100.12 °C respectively.

Depression in the freezing point and elevation in the boiling point are colligative properties. Colligative properties refer to the properties that are dependent on the concentration of solute in the solution.

Depression in the freezing point is calculated as ΔT = [tex]ik_fm[/tex]

where ΔT is depression in the freezing point

i is the dissociation factor

[tex]k_f[/tex]  is the freezing depression factor = 1.86°C kg/mol

m is the molality of the solution

So, depression in 0.060 m [tex]MgCl_2[/tex] is 3*1.86*0.06

( it has 3 as a dissociation factor as it breaks into 1 [tex]Mg^{2+[/tex] and 2 [tex]Cl^-[/tex] ions)

0 - freezing point = 0.33

freezing point = -0.33°C

So, depression in 0.060 m [tex]FeCl_3[/tex] is 4*1.86*0.06

( it has 4 as a dissociation factor as it breaks into 1 [tex]Fe^{3+[/tex] and 3 [tex]Cl^-[/tex] ions)

0 - freezing point = 0.44

freezing point = -0.44°C

Elevation in boiling point is calculated as ΔT = [tex]ik_bm[/tex]

where ΔT is Elevation in boiling point

i is the dissociation factor

[tex]k_b[/tex]  is the boiling elevation factor = 0.51°C kg/mol

m is the molality of the solution

So, elevation in 0.060 m [tex]MgCl_2[/tex] is 3*0.51*0.06

( it has 3 as a dissociation factor as it breaks into 1 [tex]Mg^{2+[/tex] and 2 [tex]Cl^-[/tex] ions)

boiling point - 100 = 0.09

boiling point = 100.09 °C

So, elevation in 0.060 m [tex]FeCl_3[/tex] is 4*0.051*0.06

( it has 4 as a dissociation factor as it breaks into 1 [tex]Fe^{3+[/tex] and 3 [tex]Cl^-[/tex] ions)

boiling point - 100 = 0.12

boiling point = 100.12 °C

Learn more about Colligative Properties:

https://brainly.com/question/30575192

#SPJ4

In what way was the reaction of the splint and CO2 different from the reaction of the H2 to the flaming splint

Answers

Explain to the kids that since there is essentially no —which is required for fire—if the bag contains only pure carbon dioxide, the splint would burn out right away.

What occurs when a burning splint is placed in hydrogen?

H2 - Hydrogen Pure hydrogen gas will burst into flames when a burning splint is added to it, making a popping sound. Oxygen (O2) A smouldering splint will rekindle when exposed to a sample of pure oxygen gas.

The flame goes out as a result of carbon dioxide replacing the oxygen it requires to burn (the effect). A popping sound is produced when a flame is near hydrogen because of how the gas burns.

learn more about flaming splint

https://brainly.com/question/30124568

#SPJ1

The breakdown of a certain pollutant X in sunlight is known to follow first-order kinetics. An atmospheric scientist studying the process fills a 20. 0Lreaction flask with a sample of urban air and finds that the partial pressure of X in the flask decreases from 0. 473atm to 0. 376atm over 5. 6hours.


Calculate the initial rate of decomposition of X, that is, the rate at which Xwas disappearing at the start of the experiment.


Round your answer to 2 significant digits

Answers

The initial rate of decomposition of X is 0.0013 M/h.

The first-order rate law is given as:

Rate = k [X]

Where, k = rate constant

[X] = concentration of X

Since the partial pressure of X is given in the problem, we need to convert it to concentration using the ideal gas law:

PV = nRT

where:

P = partial pressure of X = 0.473 atm

V = volume of the flask = 20.0 L

n = number of moles of X

R = ideal gas constant = 0.08206 L atm K^-1 mol^-1

T = temperature of the flask (assumed constant) = 298 K

Solving for n,

n = PV/RT = (0.473 atm)(20.0 L)/(0.08206 L atm K^-1 mol^-1)(298 K) = 0.952 mol X

At t = 0, the concentration of X is [X]_0 = n/V = 0.952 mol/20.0 L = 0.0476 M.

Using the given data, we can calculate the rate constant (k) as follows:

ln([X]_0/[X]) = kt

where:

t = time = 5.6 hours

Substituting the given values,

ln(0.0476/0.0376) = k(5.6 hours)

Solving for k, we get:

k = (ln(0.0476/0.0376))/5.6 hours = 0.0263 h^-1

The initial rate of decomposition of X is given by:

Rate = k[X]_0 = (0.0263 h^-1)(0.0476 M) = 0.00125 M/h

Rounding off to 2 significant digits,

Initial rate of decomposition of X = 0.0013 M/h.

To know more about decomposition, here

brainly.com/question/14057429

#SPJ4

what is the most important use of an element's atomic number? what else can we know from a neutral atom's atomic number

Answers

The most important use of an element's atomic number is that it determines the identity of an element. From a neutral atom's atomic number, we can also determine the number of electrons in that atom.

The most important use of an element's atomic number is that it determines the element's unique identity and its position on the periodic table. The atomic number is equal to the number of protons in the nucleus of an atom, which also determines the number of electrons in a neutral atom.

From a neutral atom's atomic number, we can also determine the element's symbol, its electron configuration, and its properties such as its atomic mass and the number of isotopes it has. Additionally, the atomic number can provide information about the element's reactivity and its ability to bond with other elements to form compounds. Overall, the atomic number is a fundamental characteristic of an element that is used in many different areas of chemistry and physics.

Learn more about a neutral atom's atomic number at https://brainly.com/question/7027481

#SPJ11

The most important use of an element's atomic number is that it determines the element's unique identity and properties.

The atomic number also tells us the number of protons in the nucleus of an atom, which in turn determines the number of electrons in the neutral atom. Additionally, the atomic number can give us information about the element's electron configuration and its position on the periodic table. Overall, the atomic number is a crucial piece of information for understanding an element's properties and behavior.
Hi! The most important use of an element's atomic number is to identify the specific element and its position in the periodic table. The atomic number represents the number of protons in the nucleus of an atom of that element.

From a neutral atom's atomic number, we can also determine the number of electrons, as a neutral atom has an equal number of protons and electrons. This information helps us understand the element's chemical properties and reactivity, as the arrangement of electrons in the atom's electron shells influences its behavior in chemical reactions.

Learn more about atomic number here:

https://brainly.com/question/16858932

#SPJ11

A chemical reaction has a Q10 of 3. Which of the following rates characterizes this reaction?
a. a rate of 6 at 20°C and 2 at 30°C
b. a rate of 6 at 30°C and 2 at 20°C
c. a rate of 9 at 20°C and 3 at 30°C
d. a rate of 9 at 40°C and 3 at 20°C
e. a rate of 12 at 10°C and 4 at 20°C

Answers

A chemical reaction has a Q10 of 3 option  c. a rate of 9 at 20°C and 3 at 30°C is the rates that characterizes this reaction

The Q10 value is a measure of how much the rate of a chemical reaction changes with a 10°C change in temperature. A Q10 of 3 indicates that the rate of the reaction will increase by a factor of 3 when the temperature is raised by 10°C.

Looking at the answer choices, we can see that option a and b have a Q10 value of 2, which is not the same as the given Q10 value of 3. Option e has a Q10 value of 4, which is also not the same.

Option d has a Q10 value of 3, but the rates given are at 20°C and 40°C, which is not a 10°C change in temperature.

Therefore, the only option that fits the given Q10 value and has rates that are 10°C apart is option c, which has a rate of 9 at 20°C and 3 at 30°C. Therefore, the answer is c.

To learn more about chemical reaction click here

brainly.com/question/29762834

#SPJ11

Option c states that the rate of the reaction is 9 at 20°C and 3 at 30°C. The ratio of rates between 20°C and 30°C is 9/3 = 3, which matches the Q10 value of 3.  

c. a rate of 9 at 20°C and 3 at 30°C

The Q10 value is a measure of the temperature sensitivity of a reaction, and it is defined as the factor by which the rate of a reaction changes for every 10-degree Celsius change in temperature. A Q10 value of 3 indicates that the rate of the reaction increases by a factor of 3 for every 10-degree Celsius increase in temperature.

This means that the rate of the chemical  reaction is consistent with the temperature sensitivity indicated by the given Q10 value, making option c the correct answer.

Learn more about “ chemical reaction “ visit here;

https://brainly.com/question/29039149

#SPJ4

Escriba ecuaciones iónicas netas balanceadas para las reacciones qué ocurren en cada uno de los casos siguientes. Identifique el o los iones espectadores de cada reacción. (a) Cr2(SO4)3(ac) + (NH4)2CO3(ac)=
(b) AgNO3(ac) + K2SO4(ac) =
(c) Pb(NO3)2(ac)+KOH(ac)=

Answers

(a) Balanced net ionic equation: Cr³⁺(aq) + 3CO₃²⁻(aq) → Cr₂(CO₃)₃(s); spectator ions: 2NH₄⁺(aq) and 3SO₄²⁻(aq).

(b) Balanced net ionic equation: Ag+(aq) + SO₄²⁻(aq) → Ag₂SO₄(s); spectator ions: K⁺(aq) and NO₃⁻(aq).

(c) Balanced net ionic equation: Pb²⁺(aq) + 2OH⁻(aq) → Pb(OH)₂(s); spectator ions: 2K⁺(aq) and 2NO₃⁻(aq).

(a) To write the balanced net ionic equation for the reaction between Cr₂(SO₄)₃ and (NH₄)₂CO₃, we first need to write the complete ionic equation:

Cr₂(SO₄)₃(aq) + 3(NH₄)₂CO₃(aq) → 2Cr(NO₃)₃(aq) + 3(NH₄)2SO₄(aq) + 3CO₂(g)

Then, we eliminate the spectator ions (NH₄⁺ and SO₄²⁻) to get the net ionic equation:

Cr³⁺(aq) + 3CO₃²⁻(aq) → Cr₂(CO₃)₃(s)

(b) For the reaction between AgNO₃ and K₂SO₄, the complete ionic equation is:

AgNO₃(aq) + K₂SO₄(aq) → 2KNO₃(aq) + Ag₂SO₄(s)

Eliminating the spectator ions (K⁺ and NO₃⁻) gives the net ionic equation:

Ag⁺(aq) + SO₄²⁻(aq) → Ag₂SO₄(s)

(c) Finally, for the reaction between Pb(NO₃)₂ and KOH, the complete ionic equation is:

Pb(NO₃)₂(aq) + 2KOH(aq) → Pb(OH)₂(s) + 2KNO₃(aq)

Eliminating the spectator ions (K⁺ and NO₃⁻) gives the net ionic equation:

Pb²⁺(aq) + 2OH⁻(aq) → Pb(OH)₂(s)

To learn more about Balanced net ionic equations, here

https://brainly.com/question/15467502

#SPJ4

how many grams of n2 are required to completely react with 3.03 grams of h2 for the following balanced chemical equation? A. 1.00 B. 6.00 C. 14.0 D. 28.0

Answers

The grams of N2 are required to completely react with 3.03 grams of H2 for the following balanced chemical equation is 14 g.

We may calculate the number of moles of H2 that will be used by dividing the amount of H2 that will be utilised by its molar mass. We may multiply that number by the molar mass of N2 to get how many grammes we should use. We can divide that mole quantity by 3 to determine how many moles of N2 the reaction will consume.

In the reaction 1 mole of N2 react with  3 mole of H2 and give 2 mole of NH3

mass of H2 = 3.03g

No of moles of H2 = 3.03g/2 gmol-1

         = 1.51 mole

1.51 mole of H2 require N2 = (1/3)× 1.51 moles  

        = 0.50 mole N2

molar mass of N2  =28g/mol

Mass of N2 require   = 0.50mole ×28g/mol

    = 14g

Mass of N2 require = 14g.

Learn more about Number of grams:

https://brainly.com/question/28902645

#SPJ4

The answer is C. 14.0 grams of N2 are required to completely react with 3.03 grams of H2.

The balanced chemical equation is:

N2 + 3H2 -> 2NH3

From the equation, we can see that 1 mole of N2 reacts with 3 moles of H2 to produce 2 moles of NH3.

To find out how many grams of N2 are required to react with 3.03 grams of H2, we first need to convert 3.03 grams of H2 to moles:

moles of H2 = mass of H2 / molar mass of H2
moles of H2 = 3.03 / 2.016
moles of H2 = 1.505

Now, we can use the mole ratio from the balanced equation to find out how many moles of N2 are required to react with 1.505 moles of H2:

moles of N2 = (1.505 mol H2) / (3 mol H2/1 mol N2)
moles of N2 = 0.5017

Finally, we can convert moles of N2 to grams of N2:

mass of N2 = moles of N2 x molar mass of N2
mass of N2 = 0.5017 x 28.02
mass of N2 = 14.04

To learn more about balanced chemical equation click here

brainly.com/question/28294176

#SPJ11

An allosteric enzyme can exist in two states, _____ and _____.
tense; responsive
tense; relaxed
turgid; relaxed
tight; responsive
tight; relaxed

Answers

An allosteric enzyme can exist in two states, "tense" and "relaxed".

An allosteric enzyme is a type of enzyme that has multiple binding sites, including an active site where a substrate molecule binds and a regulatory site where a regulatory molecule (also called an effector) can bind. When a regulatory molecule binds to the regulatory site, it can cause a conformational change in the enzyme, which can affect the enzyme's activity.

Allosteric enzymes can exist in two main conformations or states: tense (T) and relaxed

Visit to know more about Enzyme:-

brainly.com/question/14577353

#SPJ11

if a solution originally 0.532 m in acid ha is found to have a hydronium concentration of 0.112 m at equilibrium, what is the percent ionization of the acid?

Answers

To find the percent ionization of the acid, we need to first calculate the initial concentration of the acid (HA) before it dissociates.

Since the solution is originally 0.532 M in acid (HA), we can assume that the initial concentration of HA is also 0.532 M.

Next, we need to calculate the concentration of the conjugate base (A-) at equilibrium. We can use the equation for the dissociation of an acid:
HA + H2O ⇌ H3O+ + A-

We know that the hydronium concentration at equilibrium is 0.112 M, so the concentration of the conjugate base is also 0.112 M.

To calculate the percent ionization of the acid, we use the equation:
% ionization = (concentration of dissociated acid / initial concentration of acid) x 100

We can find the concentration of dissociated acid (H3O+) by subtracting the concentration of the conjugate base (A-) from the hydronium concentration:


[H3O+] = 0.112 M - 0 M = 0.112 M

Plugging in the values, we get:
% ionization = (0.112 M / 0.532 M) x 100 = 21.05%

Therefore, the percent ionization of the acid is 21.05%.

To know more about percent ionization :

https://brainly.com/question/1619653

#SPJ11

The percent of ionization of an acid in solution of 0.532 M in acid HA i and have a hydronium concentration of 0.112 M is equals to the 21.1%.

The ionization of acids results hydrogen ions, thus, that's why compounds act as proton donors.

Molarity of solution = 0.532 M

At Equilibrium, hydronium concentration = 0.112 M

As we know, concentration is defined as the number of moles of substance in a litre of solution, that most of time concentration is replaced by molarity. So, concentration of acid solution, [ H A] = 0.532 M

Chemical reaction, [tex]HA (aq) + H_2O -> H_3O^{ +}+A^{-}[/tex]

percent of ionization of the acid =

[tex] \frac{ [ H_3O^{+}] }{ [ HA]} × 100 [/tex]

= (0.112/0.532) × 100

= 21.1%

Hence, required value is 21.1%.

For more information about percent of ionization, visit :

https://brainly.com/question/14225136

#SPJ4

a certain volume of air currently holds 25 grams of water vapor. at the same temperature, the maximum amount the air can contain is 100 grams. what is the relative humidity?

Answers

To calculate the relative humidity, you can use the following formula: Relative Humidity = (Current amount of water vapor / Maximum water vapor capacity) x 100 Relative Humidity = (25 grams / 100 grams) x 100 = 25% So, the relative humidity is 25%.

The relative humidity can be calculated by dividing the actual amount of water vapor in the air (25 grams) by the maximum amount the air can hold at that temperature (100 grams) and then multiplying by 100 to get a percentage.

So,

Relative Humidity = (actual amount of water vapor / maximum amount air can hold) x 100

Relative Humidity = (25 / 100) x 100

Relative Humidity = 25%

Therefore, the relative humidity in the air is 25%.

Learn more about humidity here: brainly.com/question/22069910

#SPJ11

which of the following aqueous solutions has the highest molar concentration of na (aq)?(assume each compound is fully dissolved in water.)group of answer choices3.0m nacl (sodium chloride)3.0m nac2h3o2 (sodium acetate)1.5m na2so4 (sodium sulfate)1.0m na3po4 (sodium phosphate)all of these solutions have the same concentration of na (aq).

Answers

All of these solutions have the same concentration of Na⁺ (aq) at 3.0 moles for molar concentration.

The highest molar concentration of Na⁺ (aq) can be determined by calculating the moles of Na⁺ ions in each solution.

1. Identify the number of sodium ions (Na⁺) in each compound:
  - NaCl: 1 Na⁺ ion
  - NaC₂H₃O₂: 1 Na⁺ ion
  - Na₂SO₄: 2 Na⁺ ions
  - Na₃PO₄: 3 Na⁺ ions

2. Calculate the moles of Na⁺ ions in each aqueous solution:
  - 3.0 M NaCl: 3.0 M * 1 Na⁺ ion = 3.0 moles of Na⁺ ions
  - 3.0 M NaC₂H₃O₂: 3.0 M * 1 Na⁺ ion = 3.0 moles of Na⁺ ions
  - 1.5 M Na₂SO₄: 1.5 M * 2 Na⁺ ions = 3.0 moles of Na⁺ ions
  - 1.0 M Na₃PO₄: 1.0 M * 3 Na⁺ ions = 3.0 moles of Na⁺ ions

3. Compare the moles of Na⁺ ions in each solution to determine the highest concentration.

All of these solutions have the same concentration of Na⁺ (aq) at 3.0 moles.

Learn more about molar concentration here:

https://brainly.com/question/21841645

#SPJ11

Though all the solutions have the same concentration of Na+ (aq), an aqueous solution of NaCl with 3.0 M has the highest molar concentration among the given solutions.

Explanation: To determine the molar concentration of Na+ (aq) in each solution, we need to consider the stoichiometry of the dissociation of each compound in water.


For sodium chloride (NaCl), it dissociates completely into Na+ and Cl- ions, so the molar concentration of Na+ (aq) is equal to the molar concentration of NaCl. Therefore, the molar concentration of Na+ (aq) in 3.0M NaCl is 3.0M.
For sodium acetate (NaC2H3O2), it dissociates into Na+ and C2H3O2- ions, but in a 1:1 ratio. So, the molar concentration of Na+ (aq) is half of the molar concentration of NaC2H3O2. Therefore, the molar concentration of Na+ (aq) in 3.0M NaC2H3O2 is 1.5M.
For sodium sulfate (Na2SO4), it dissociates into 2 Na+ ions and 1 SO4 2- ion. So, the molar concentration of Na+ (aq) is twice the molar concentration of Na2SO4. Therefore, the molar concentration of Na+ (aq) in 1.5M Na2SO4 is 3.0M.
For sodium phosphate (Na3PO4), it dissociates into 3 Na+ ions and 1 PO4 3- ion. So, the molar concentration of Na+ (aq) is three times the molar concentration of Na3PO4. Therefore, the molar concentration of Na+ (aq) in 1.0M Na3PO4 is 3.0M.

Therefore, the solution with the highest molar concentration of Na+ (aq) is 3.0M NaCl (sodium chloride).

To know more about the molar concentration of solutions:

brainly.com/question/8732513

#SPJ11

the tollen's test is the reaction of aldehydes with silver(i) ions in basic solution to form silver metal and a carboxylate. reaction of 2 silver 1 ions with a generic aldehyde and 3 hydroxide ions to form 2 silver atoms, a generic carboxylate, and 2 water molecules. which species is being oxidized in the reaction? aldehyde which species is being reduced in the reaction? silver(i) ion which species is the visual indicator of a positive test? silver metal

Answers

In Tollen's test, the reaction of aldehydes with silver(i) ions in basic solution results in the formation of silver metal and carboxylate.

Specifically, the reaction involves the oxidation of the aldehyde and the reduction of the silver(i) ion. This can be seen in the reaction of 2 silver 1 ions with a generic aldehyde and 3 hydroxide ions, which produces 2 silver atoms, a generic carboxylate, and 2 water molecules. The species being oxidized in the reaction is the aldehyde, while the species being reduced is the silver(i) ion. The visual indicator of a positive test is the formation of silver metal, which indicates the presence of an aldehyde in the sample.

To learn more about Tollen's test, refer:-

https://brainly.com/question/30892406

#SPJ11

In this Tollen's test, the species being oxidized is the aldehyde (RCHO), while the species being reduced is the silver(I) ion (Ag+). The visual indicator of a positive test is the formation of silver metal (Ag), which appears as a shiny silver mirror on the inner surface of the test tube.

What is Tollen's Test?

In the Tollen's test, the reaction involves aldehydes reacting with silver(I) ions in a basic solution to form silver metal and a carboxylate. The generic equation for this reaction is:

2 Ag+ + RCHO + 3 OH- → 2 Ag + RCOO- + 2 H2O

In the Tollen's test, aldehydes react with silver(i) ions in basic solution to form silver metal and a carboxylate. The reaction involves the oxidation of the aldehyde and reduction of the silver(i) ion. Specifically, in the presence of 2 silver(i) ions and 3 hydroxide ions, a generic aldehyde is oxidized to form a generic carboxylate and 2 water molecules, while the silver(i) ions are reduced to form 2 silver atoms. The visual indicator of a positive test is the formation of silver metal, which indicates the presence of an aldehyde. Therefore, in this reaction, the aldehyde species is being oxidized.

To know more about Tollen's Test:

https://brainly.com/question/13833774

#SPJ11

you are preparing a standard aqueous solution for analysis by measuring a property of the solution that is directly related to a solution's concentration. unknown to you, the volumetric flask that you are using to make the solution has some residual water in it from the last time it was used. what effect will this have on the measured property of this solution?

Answers

Fill the volumetric flask approximately two thirds full and mix. Carefully fill the flask to the mark etched on the neck of the flask. Use a wash bottle or medication dropper if necessary. Mix the solution wholly by using stoppering the flask securely and inverting it ten to twelve times.

Why volumetric flask is more appropriate to be used in the preparation of the standard solution?

A volumetric flask is used when it is imperative to be aware of each precisely and accurately the quantity of the solution that is being prepared. Like volumetric pipets, volumetric flasks come in distinctive sizes, depending on the extent of the answer being prepared.

Firmly stopper the flask and invert multiple times (> 10) to make certain the solution is nicely mixed and homogeneous. When working with a solute that releases warmth or gas all through dissolution, you ought to additionally pause and pull out the stopper once or twice. Use flasks for preparing options only.

Learn more about volumetric flask here:

https://brainly.com/question/2088214#SPJ1

Read the given chemical reaction.


C2H6 + O2 → CO2 + H2O


How many moles of O2 are required to react completely with 3. 2 moles of C2H6?


3. 5 moles of O2

6. 5 moles of O2

10. 4 moles of O2

11. 2 moles of O2

Answers

11.2 moles of [tex]\rm O_2[/tex] are required to react completely with 3.2 moles of [tex]\rm C_2H_6[/tex]. Therefore option D is correct.

The balanced chemical equation for the complete combustion of [tex]\rm C_2H_6[/tex] (ethane) with oxygen (O2) is: 2 [tex]\rm C_2H_6 + 7 O_2\ - > 4 CO_2 + 6 H_2O[/tex]

From the balanced equation, we can see that 2 moles of [tex]\rm C_2H_6[/tex] react with 7 moles of [tex]\rm O_2[/tex]. To find out how many moles of [tex]\rm O_2[/tex] are required to react completely with 3.2 moles of [tex]\rm C_2H_6[/tex], we can set up a proportion:

(7 moles [tex]\rm O_2[/tex] / 2 moles [tex]\rm C_2H_6[/tex]) = (x moles [tex]\rm O_2[/tex] / 3.2 moles [tex]\rm C_2H_6[/tex])

Solving for x:

x = (7 moles [tex]\rm O_2[/tex] / 2 moles [tex]\rm C_2H_6[/tex]) * 3.2 moles [tex]\rm C_2H_6[/tex]

x = 11.2 moles [tex]\rm O_2[/tex]

So, 11.2 moles of [tex]\rm O_2[/tex] are required to react completely with 3.2 moles of [tex]\rm C_2H_6[/tex]. Therefore, the correct answer is 11.2 moles of [tex]\rm O_2[/tex].

Therefore option D is correct.

Know more about stoichiometry:

https://brainly.com/question/28780091

#SPJ12

Help what's the answer?

Answers

Answer:

91

Explanation:

ok

At 215°C a gas has a volume of 18.00 L. What is the volume of this gas at 23.0°C?

Answers

Answer:

using

V1/T1=V2/T2

make V2 subject of formula

V2= V1T2/T1

V2= 1.9L

by titration, it is found that 20.44 ml of 0.1323 m naoh (aq) is needed to neutralize 25.00 ml of h2so4 (aq). calculate the concentration of the h2so4 solution in m.

Answers

The concentration of the H₂SO₄ solution is approximately 0.0541 M.

To calculate the concentration of the H₂SO₄ solution, you can use the concept of equivalence in the neutralization reaction:

H₂SO₄ (aq) + 2 NaOH (aq) → Na₂SO₄ (aq) + 2 H₂O (l)

Using the given information, we can start by finding the moles of NaOH:

moles of NaOH = volume (L) × concentration (M) = 0.02044 L × 0.1323 M = 0.00270492 moles

Since the stoichiometry of the reaction is 1:2 (H₂SO₄:NaOH), the moles of H₂SO₄ can be calculated as follows:

moles of H₂SO₄ = 0.00270492 moles NaOH × (1 mole H₂SO₄ / 2 moles NaOH) = 0.00135246 moles

Finally, we can find the concentration of the H₂SO₄ solution:

concentration of H₂SO₄ (M) = moles of H₂SO₄ / volume (L) = 0.00135246 moles / 0.02500 L = 0.0540984 M

Therefore, the concentration of the H₂SO₄ solution is approximately 0.0541 M.

Visit here to learn more about stoichiometry  : https://brainly.com/question/30215297
#SPJ11

Other Questions
mt. auburn cemetery was described as the american equivalent to richmond park. this means that: A ball is dropped from a height of 32 m.With each bounce, the ball reaches aheight that is half the height ofthe previous bounce. Afterwhich bounce will the ballrebound to a maximumheight of 25 cm? the goal of rater error training is to increase rating accuracy by making raters aware of the errors they are likely to make intentionally. T/F in a(n) ____ joint the edges of the metal meet so that the thickness of the joint is approximately equal to the thickness of the metal. This manipulator is used to establish a field width for the value that follows it: field_width set field setw iomanip None of these A compound microscope is a two-lens system used to look at very small objects. Which of the following statements is correct? The objective lens is a short focal length, convex lens and the eyepiece functions as a simple magnifier. The objective lens is a long focal length, convex lens and the eyepiece functions as a simple magnifier. The objective lens and the eyepiece both have the same focal length and both serve as simple magnifiers. The objective lens is a short focal length, concave lens and the eyepiece functions as a simple magnifier. The objective lens is a long focal length, concave lens and the eyepiece functions as a simple magnifier. Constant growth stocks 6 Super Carpeting Inc (CI) suot peid in dividend (D) of 1 pershare and its annun evidend is expected to grow as a constante (73.00 per year the required return (.) on sy stock 7.304, then the Interne value of cry Dershare Which of the following statement is true about the constant growth mode - when using a constant growth out to analyze stock, an increase in the required rate of retum occurs when the growth rate romans the same, this will lead to a decreased value of the stock - when using a constant growth out to analyze stock, if an increase in the required rate of return scars we the growth rate remaine the same, this will lead to an increased value of the stock. -4 x- 4 0 graph the conjuntion ?? can someone help What is the perimeter of the triangle? who was sanjeev worried about seeing the items on the mantel and around the house? question 1 options: his parents twinkle's parents the people attending their housewarming. twinkle's co-workers PLEASE HELP AND EXPLAIN AND SHOW WORK ON HOW YOU GOT THE ANSWER I WILL MARK YOU BRAINLIEST. An important social center for the Greek community was the ______. A) village. B) marketplace. C) saloon. D) coffeehouse. If a ray-finned fish is to both hover (remain stationary) in the water column and ventilate its gills effectively, then what other structure besides its swim bladder will it use?A) its pectoral finsB) its lateral line systemC) its caudal (tail) finD) its operculum speakers regulate the conversation through which two major types of speaker cues? bats are the only mammals to evolve powered flight. they group of answer choices appear in eocene time are small, shrew-like mammals are mostly insectivores all of the above 17. which health promotion behaviors are the most efficient in preventing pyelonephritis? a. treat any skin lesions with antibiotics and cover the open lesions b. washing the perineum with warm water and soap from front to back c. treating fungal infections of the throat with antifungal medication d. have a pneumonia immunization every year to prevent streptococcal infection A rectangular pyramid is shown in the figure.A rectangular pyramid with a base of dimensions 7 centimeters by 5 centimeters. The two large triangular faces have a height of 7.6 centimeters. The two small triangular faces have a height of 8 centimeters.What is the surface area of the pyramid? Heavy construction equipment and farm equipment are commonly referred to as__ Cynthia's letter to Miguel about Cynthia's new neighborhood event. the secret passphrase is encrypted inside. evolution processes illustrate the tension that exists between individuals efforts to promote change and ""customers"" preferences and habits related to existing (previously adopted) solutions. TRUE OR FALSE?