when an objects speed goes up,the kinetic energy goes…

Answers

Answer 1

[tex]k.e. = \frac{1}{2} m {v}^{2} [/tex]

when the speed (v) goes up, the kinetic energy goes up as well.

Answer 2
When an object's speed goes up, the kinetic energy goes up as well.

Kinetic energy is the energy that an object possesses due to its motion. The formula for kinetic energy is:

kinetic energy = (1/2) x mass x velocity^2

As you can see from the formula, kinetic energy is directly proportional to the square of the velocity. This means that as the velocity of an object increases, the kinetic energy also increases. Conversely, if the velocity of an object decreases, the kinetic energy decreases as well.

Related Questions

Magnesium nomianl corrosion potential
A) -1.10V
B) -1.05v
C) 1.75 to 1.55V
D) -1.75 to -1.55V
E) -0.2 to -0.5V

Answers

The correct answer to the magnesium nominal corrosion potential is option B, which is -1.05V. The corrosion potential is a measure of the relative tendency of a metal to corrode in a given environment. It is the voltage difference between a metal and a reference electrode, and it provides information on the metal's susceptibility to corrosion.



The Magnesium is a reactive metal that is commonly used in various industries due to its lightweight and high strength-to-weight ratio. However, it is also prone to corrosion in many environments, especially in the presence of water and salt. Understanding the magnesium nominal corrosion potential is crucial in designing and selecting materials for different applications. The magnesium nominal corrosion potential is affected by many factors, including the chemical composition of the environment, temperature, and ph. Therefore, it is essential to consider these factors when selecting a suitable material for a particular application. In conclusion, the magnesium nominal corrosion potential is an important parameter that provides information on the metal's susceptibility to corrosion. The correct answer to the question of the magnesium nominal corrosion potential is -1.05V, which is option B. Understanding this parameter is crucial in selecting and designing materials for different applications and in implementing proper maintenance and protection strategies.

learn more about magnesium nominal here.

https://brainly.com/question/1533548

#SPJ11

a 0.12 g honeybee acquires a charge of 22pc while flying. the earth's electric field near the surface is typically (100 n/c , downward).
A). What is the ratio of the electric force on the bee to the bee's weight? Fe/W = ?
B). What electric field strength would allow the bee to hang suspended in the air? (in N/C)
C). What would be the necessary electric field direction for the bee to hang suspended in the air? Upward, downward or horizontally directed?

Answers

A. the ratio of electric force on the bee to the bee's weight is[tex]1.87 * 10^{-9}[/tex], B. the electric field strength required to suspend the bee in air is [tex]4.72 * 10^6 N/C[/tex], and C. the electric field direction for a bee to hang suspended in air must be upward.

A) To calculate the ratio of the electric force on the bee to the bee's weight, we need to first find the electric force acting on the bee. Using the formula F = qE, where q is the charge on the bee and E is the electric field strength, we get:[tex]F = (22 pc)(100 n/C) = 2.2 * 10^{-12} N[/tex]To find the weight of the bee, we can use the formula W = mg, where m is the mass of the bee and g is the acceleration due to gravity ([tex]9.8 m/s^2)[/tex]:[tex]W = (0.12 g)(9.8 m/s^2) = 1.176 * 10^{-3} N[/tex]Now, we can calculate the ratio of electric force to weight:[tex]Fe/W = (2.2 * 10^{-12} N)/(1.176 * 10^{-3} N) = 1.87 * 10^{-9}[/tex]Therefore, the ratio of electric force on the bee to the bee's weight is [tex]1.87 * 10^{-9}[/tex].B) For the bee to hang suspended in the air, the electric force on the bee should be equal and opposite to the weight of the bee. Thus, we can set F = W and solve for E:qE = mg[tex]E = (mg)/q = (0.12 g)(9.8 m/s^2)/(22 pc) = 4.72 * 10^6 N/C[/tex]Therefore, the electric field strength required to suspend the bee in air is[tex]4.72 * 10^6 N/C.[/tex]C) Since the electric field near the surface of the earth is typically directed downward, the necessary electric field direction for the bee to hang suspended in air would be upward.

For more such question on electric force

https://brainly.com/question/30236242

#SPJ11

If the input distance of the nutcracker is 15.0 cm and the output distance is 3.0 cm. What is the ideal mechanical advantage of the nutcracker?

Answers

The ideal mechanical advantage of the nutcracker is 5.0.

What is the ideal mechanical advantage of the nutcracker?

The ideal mechanical advantage of a nutcracker can be calculated as follows;

IMA = input distance / output distance

The input distance = 15 cm

The output distance 3 cm

IMA = 15 cm / 3 cm

IMA = 5.0

Thus, the ideal mechanical advantage of the nutcracker is determined using the ratio of the distances.

Learn more about ideal mechanical advantage here: https://brainly.com/question/27679784

#SPJ1

A cannon is fired from the edge of a small cliff. The height of the cliff is 80. 0 m.

The cannon ball is fired with a perfectly horizontal velocity of 80. 0 m/s.

2. How much time is the cannon ball in the air?

3. How far will the cannon ball fly horizontally before it strikes the

ground?

Answers

To solve this problem, we can use the equations of motion for projectile motion.

First, let's consider the vertical motion of the cannonball. We know that the initial vertical velocity is 0 m/s and the acceleration due to gravity is -9.81 m/s^2. Using the equation of motion for vertical motion:

y = y0 + v0t + 1/2at^2

where y is the vertical position, y0 is the initial vertical position (80.0 m in this case), v0 is the initial vertical velocity (0 m/s), a is the acceleration due to gravity (-9.81 m/s^2) and t is the time.

Solving for t, we get:

t = sqrt(2y/a)

t = sqrt(2 x 80.0 / 9.81)

t = 4.04 s (rounded to two decimal places)

So the cannonball is in the air for 4.04 seconds.

Next, let's consider the horizontal motion of the cannonball. We know that the initial horizontal velocity is 80.0 m/s and there is no acceleration in the horizontal direction. Using the equation of motion for horizontal motion:

x = x0 + v0xt

where x is the horizontal position, x0 is the initial horizontal position (0 m in this case), v0x is the initial horizontal velocity (80.0 m/s) and t is the time.

Solving for x, we get:

x = v0x * t

x = 80.0 * 4.04

x = 323.2 m (rounded to one decimal place)

So the cannonball will fly horizontally for 323.2 meters before it strikes the ground.

(b) what is the velocity of a 0. 400-kg billiard ball if its wavelength is 5. 8 cm cm (large enough for it to interfere with other billiard balls)?

Answers

The velocity of a 0. 400-kg billiard ball if its wavelength is 5. 8 cm (large enough for it to interfere with other billiard balls) is 3.06 x [tex]10^{-32}[/tex] m/s

λ = h/mv

where λ is the wavelength, h is Planck's constant, m is the mass of the billiard ball, and v is its velocity.

Rearranging this equation, we can solve for v:

v = h/(mλ)

Substituting the given values, we get:

v = (6.626 x [tex]10^{-34}[/tex] J s) / (0.400 kg x 5.8 x [tex]10^{-2}[/tex] m)

v = 3.06 x [tex]10^{-32}[/tex] m/s

Wavelength is the distance between two consecutive peaks or troughs of a wave. It is represented by the Greek letter lambda (λ). Wavelength is an important characteristic of all types of waves, including light, sound, and electromagnetic waves. The wavelength of a wave is determined by its frequency and speed. Higher-frequency waves have shorter wavelengths, while lower-frequency waves have longer wavelengths. Similarly, faster waves have shorter wavelengths, while slower waves have longer wavelengths.

Wavelength plays a crucial role in the behavior of waves. For example, in optics, the wavelength of light determines its color and how it interacts with matter. In acoustics, the wavelength of sound determines the pitch of the sound. The concept of wavelength is also important in quantum mechanics, where it is used to describe the wave-like behavior of subatomic particles.

To learn more about Wavelength visit here:

brainly.com/question/12924624

#SPJ4

The following trouble in an impressed current system would give a normal DC voltage and zero (0) current output
A Faulty transformer
B Broken cable to the anodes
C No AC supply
D Faulty rectifying elements

Answers

B - Broken cable to the anodes. If the cable to the anodes is broken, there would be no current flow through the anodes, resulting in a zero current output.

However, the impressed current system would still be generating the normal DC voltage. The other options would cause a disruption in the system's ability to generate the normal DC voltage and would not result in a zero current output. The explanation:  1. A faulty transformer would result in no DC voltage output, so it's not the correct answer. 2. A broken cable to the anodes would lead to a normal DC voltage but zero (0) current output because the circuit is interrupted, making this the correct answer. 3. No AC supply would mean no power to the system, so both voltage and current would be zero (0), which doesn't match the question's requirements. 4. Faulty rectifying elements would typically result in irregular or no DC voltage output, so this option is not correct either.

Learn more about anodes here: brainly.com/question/4052514

#SPJ11

A particle moves along the x-axis so that at time t > 0 its position is given by x(t) = 12e−tsin t. What is the first time t at which the velocity of the particle is zero?

Answers

The first time t at which the velocity of the particle is zero is t = π/4.

To find the first time t at which the velocity of the particle is zero, we need to find the derivative of the position function x(t) with respect to time t, and then set it equal to zero and solve for t.

Taking the derivative of x(t), we get:

[tex]x'(t) = -12e^(-t)sin(t) + 12e^(-t)cos(t)[/tex]

Setting x'(t) equal to zero, we get:

0 = [tex]-12e^(-t)sin(t) + 12e^(-t)cos(t)[/tex]

Dividing both sides by [tex]12e^(-t)[/tex], we get:

0 = -sin(t) + cos(t)

Simplifying this equation, we get:

tan(t) = 1

Taking the inverse tangent of both sides, we get:

t = π/4 + nπ

where n is an integer.

However, we are interested in the first-time t at which the velocity is zero, so we only need to consider the solution with the smallest positive value of t. Since π/4 is already positive, the smallest positive solution is:

t = π/4

Therefore, the first time t at which the velocity of the particle is zero is t = π/4.

Learn more about the velocity

https://brainly.com/question/17127206

#SPJ4

Which of the following is NOT part of some
active regions on the Sun?



Prominences
Plages
sunspot
flares
granulation

Answers

Answer: Granulation

Explanation:

The answer is Granulation.

The asteroid Ceres orbits the sun with an orbital period of 4.61 Earth years.
Given:
a. What is the mean radius of Ceres' orbit? (ms = 1.99 x 1030 kg)
b. What is the orbital speed of the asteroid?

Answers

Answer:

Explanation:

The mean radius of Ceres' orbit can be calculated using Kepler's Third Law.

b. Explanation: Kepler's Third Law states that the square of the orbital period of a planet (or asteroid in this case) is proportional to the cube of the semi-major axis (mean radius) of its orbit. Mathematically, this relationship can be expressed as:

T^2 = (4π^2 / GM) * r^3

where T is the orbital period, G is the gravitational constant, M is the mass of the sun, and r is the mean radius of the orbit.

Given that Ceres has an orbital period of 4.61 Earth years, we can substitute this value into the equation and solve for the mean radius (r).

T^2 = (4π^2 / GM) * r^3

(4.61 years)^2 = (4π^2 / G * (mass of sun)) * r^3

Solving for r, we get:

r = [(T^2 * G * (mass of sun)) / (4π^2)]^(1/3)

Plugging in the known values for G (gravitational constant) and the mass of the sun, and using the appropriate units, we can calculate the mean radius of Ceres' orbit.

To learn more about Kepler's Third Law and how it is used to calculate orbital parameters, you can refer this https://brainly.in/question/15032984#:~:text=K%20people%20helped-,Answer%3A,of%20their%20mean%20orbit%20radius..

An electron has a speed of 0.643c. Through what potential difference would the electron need to be accelerated (starting from rest) in order to reach this speed? (c = 3.00 × 108 m/s, e = 1.60 × 10-19 C, mel= 9.11 × 10-31 kg) A) 160 kV B) 130 kV C) 180 kV D) 200 kV

Answers

The electron needs to be accelerated through a potential difference of approximately 307 kV to reach a speed of 0.643c. The closest option is (B) 130 kV

We can use the kinetic energy of the electron to find the potential difference through which it needs to be accelerated.

The relativistic kinetic energy of an electron is given by:

KE = (γ - 1)mc²

where γ is the Lorentz factor and m is the rest mass of the electron.

The Lorentz factor is given by:

γ = 1/√(1 - (v/c)²)

where v is the speed of the electron and c is the speed of light.

Substituting the given values, we get:

v = 0.643c

γ = 1/√(1 - (0.643)²) = 1.45

m = 9.11 × 10⁺³¹ kg

c = 3.00 × 10⁸ m/s

e = 1.60 × 10⁻¹⁹ C

The kinetic energy of the electron is:

KE = (γ - 1)mc² = (1.45 - 1) (9.11 × 10⁻³¹ kg) (3.00 × 10⁸ m/s)² = 4.93 × 10⁻¹⁴ J

The potential difference required to accelerate the electron to this speed can be found using:

KE = eV

where V is the potential difference.

Substituting the values, we get:

V = KE/e = (4.93 × 10⁻¹⁴ J) / (1.60 × 10⁻¹⁹ C) = 307187.5 V ≈ 307 kV

An electron with a speed of 0.643c needs to be accelerated through a potential difference to reach this speed. Using the relativistic kinetic energy formula, the potential difference is calculated to be approximately 307 kV, which is closest to option (B) 130 kV.

To know more about the potential difference refer here :

https://brainly.com/question/30701189#

#SPJ11

THIS IS PART OF YOUR PRAC APP:
Given 5.9V and 3.02amps for a rectifier.
If the present rectifier voltage output remains constant, calculate current output if the circuit resistance of the cathodic protection system doubles
A) 5.0A
B) 6.04A
C)1.5A
D) 3.2A
E) 2.2A

Answers

The correct answer is option C) The current output would be 1.51 amps if the circuit resistance of the cathodic protection system doubles.

The current output (I) of a circuit can be calculated using Ohm's Law, which states that I = V/R, where V is the voltage and R is the resistance. In this case, the voltage output of the rectifier is 5.9V and the current output is 3.02A. If the circuit resistance doubles, the new resistance would be 2R, where R is the original resistance. To calculate the new current output, we can use the formula [tex]I = V/(2R) = (1/2)*(V/R) = (1/2)*3.02A = 1.51A[/tex]. As the resistance of the circuit increases, the current output decreases proportionally, according to Ohm's Law.

learn more about circuit resistance here:

https://brainly.com/question/27206933

#SPJ11

air located above a cold land surface will gradually become cooler. what happens to the air as it cools? a. its pressure increases, and it rises above warmer air. b. it becomes denser and sinks below warmer air. c. its pressure decreases, and it sinks below warmer air. d. it becomes less dense and rises above warmer air.

Answers

As the air cools, it becomes denser and sinks below warmer air (option b). Cooling causes a decrease in air molecules' kinetic energy, reducing their speed and increasing their proximity to each other.

This increased density leads to higher air pressure. According to the ideal gas law, decreasing temperature decreases the air pressure.

This denser, cooler air displaces the warmer, less dense air, causing it to rise. This process is known as convection.

It creates vertical air movements, with cooler air sinking and warmer air rising.

The resulting circulation patterns play a crucial role in weather and climate systems, influencing wind patterns, cloud formation, and precipitation. Thus, the correct option is b.

For more such questions on kinetic energy, click on:

https://brainly.com/question/8101588

#SPJ11

a person travels along a straight road for the first half of total time with a velocity v1 and the second half of total time with a velocity v2. thus the average velocity v is given by

Answers

Therefore, the person's average velocity is given by (v1 + v2) / 2.

When content is loaded, it means that information or data is being stored or displayed. In this scenario, a person is traveling along a straight road and changing their velocity halfway through the total time. The first half of the total time is spent with a velocity of v1, and the second half is spent with a velocity of v2.

To find the average velocity, we use the formula:

v = (total displacement) / (total time)

Since the person is traveling along a straight road, the total displacement is just the difference between the starting and ending points. However, we don't have enough information to calculate the displacement in this problem.

Instead, we can use the fact that the average velocity is equal to the total displacement divided by the total time. Since the person is traveling for the same amount of time with each velocity, we can say that the total time is just twice the time spent at either velocity:

total time = time spent at v1 + time spent at v2 = 2 * (total time / 2) = total time

Now we can write the formula for the average velocity:

v = (total displacement) / (total time) = (d) / (total time)

To find d, we can use the fact that the person traveled the first half of the distance with velocity v1 and the second half with velocity v2. Since distance is equal to velocity times time, we can say:

d = (v1)(total time / 2) + (v2)(total time / 2)

Now we can substitute this into the formula for v:

v = (d) / (total time) = [(v1)(total time / 2) + (v2)(total time / 2)] / (total time)

Simplifying this expression, we get:

v = (v1 + v2) / 2

This means that the average velocity is just the average of the two velocities. So if the person travels at 10 m/s for the first half of the time and 20 m/s for the second half of the time, the average velocity is:

v = (10 m/s + 20 m/s) / 2 = 15 m/s

Therefore, the person's average velocity is given by (v1 + v2) / 2.

To know more about average velocity click here:

https://brainly.com/question/862972

#SPJ11

Why do the elements with d subshell electrons not appear until the fourth row, even though there is a d subshell for n=3?
a. Electrons in the d subshell do not have noticeable chemical activity for n=3.
b. The d subshell is at higher energy than the s subshell with the next-higher value of n.
c. Pauli's exclusion principle does not allow electrons into the d subshell for n = 3.
d. Since the first row actually corresponds to n = 0 it follows that the fourth row is the correct place for the d subshell with n = 3.

Answers

b. The d subshell is at higher energy than the s subshell with the next-higher value of n. The reason why the elements with d subshell electrons do not appear until the fourth row is that the d subshell is at higher energy than the s subshell with the next-higher value of n.

This means that the electrons in the d subshell require more energy to be excited and participate in chemical reactions.

Additionally, Pauli's exclusion principle does not allow electrons to occupy the same energy level and subshell with the same spin, which limits the number of electrons that can occupy the d subshell. Therefore, even though there is a d subshell for n=3, the d subshell electrons do not have noticeable chemical activity at this energy level, and they only become more chemically active in the fourth row when the d subshell is at a higher energy level.

It is important to note that the first row corresponds to n=1, not n=0 as mentioned in option d. The elements in the first row have their electrons in the 1s subshell, while the second row corresponds to n=2 and the electrons are in the 2s and 2p subshells.

Overall, the energy levels and subshells of the electrons in the elements follow a specific pattern, with each row representing a higher energy level and the subshells filling up in a specific order.

learn more about elements with d subshell here: brainly.com/question/21818391

#SPJ11

In an em wave traveling west, the b field oscillates vertically and has a frequency of 88. 0 khz and an rms strength of 6. 50×10−9 t

Answers

The rms intensity of this electromagnetic wave is 6.50 x 10-9 T, and its vertical magnetic field oscillates at an oscillation frequency of 88.0 kHz.

The magnetic field of this electromagnetic wave oscillates vertically and is travelling westward. The magnetic field is bouncing up and down 88,000 times per second at the wave's frequency of 88.0 kHz. The magnetic field has a root mean square (rms) strength of 6.50 x 10-9 T.

The way a wave interacts with matter can depend on its frequency and power. Higher frequency waves have the potential to be more energetic and potentially harmful to living things. Lower frequency waves, however, might be less dangerous.

In conclusion, the rms intensity of this electromagnetic wave is 6.50 x 10-9 T, and its vertical magnetic field oscillates at an oscillation frequency of 88.0 kHz.

Learn more about electromagnetic wave:
https://brainly.com/question/29774932

#SPJ4

Determine the circuit rating for the following appliances or equipment on a 120/240 V circuit using table 12 from chapter 16

a. Household range.

b. Trash compactor.

c. Household clothes washer.

d. Household clothes dryer (electric).

e. Central air conditioner (5-ton)

Answers

The circuit rating for a household range would be 40 amperes (A) (8.75 kW ÷ 240 V = 36.5 A, which is then rounded up to the next standard size of 40 A).

a. The circuit rating for a household range would be 40 amperes (A) (8.75 kW ÷ 240 V = 36.5 A, which is then rounded up to the next standard size of 40 A).

b. The circuit rating for a trash compactor would be 15 amperes (A) (1.4 kW ÷ 120 V = 11.7 A, which is then rounded up to the next standard size of 15 A).

c. The circuit rating for a household clothes washer would be 15 amperes (A) (1.2 kW ÷ 120 V = 10 A, which is then rounded up to the next standard size of 15 A).

d.The circuit rating for a household clothes dryer would be 30 amperes (A) (5.5 kW ÷ 240 V = 22.9 A, which is then rounded up to the next standard size of 30 A).

e. The circuit rating for a central air conditioner would be 60 amperes (A) (14.5 kW ÷ 240 V = 60.4 A, which is then rounded up to the next standard size of 60 A).

A  circuit refers to a closed loop of electrical components that allows for the flow of electric current. A circuit typically consists of a power source (such as a battery or generator), wires or conductors to connect the components, and various electrical components such as resistors, capacitors, and switches.

Electric current flows through the circuit in response to a voltage difference created by the power source. The flow of current can be influenced by the properties of the components in the circuit, such as their resistance or capacitance, which can affect the amount of current that flows through them. Circuits can be designed and analyzed using principles of circuit theory, which involves the use of mathematical equations and models to predict the behavior of the circuit.

To learn more about Circuit visit here:

brainly.com/question/27206933

#SPJ4

find the total (resultant) force and the total (resultant) moment about point a of the given forcing system note that in statics study the original complex forcing system can be replaced by this simple system of a single point force and a single moment about a only.

Answers

In order to calculate the total force and moment around point A, we must first simplify the system into a single point force and a single moment around point A. This point force is determined by adding all individual forces in the system using vector addition. The resultant force has both magnitude and direction.

The single moment about point a is the sum of all the moments of the individual forces in the system about point a. We can add the moments using the right-hand rule to get the resultant moment. The resultant moment will have a magnitude and direction.

Once we have the single point force and single moment, we can find the total (resultant) force and moment about point a using the following equations:

Resultant force = single point force

Resultant moment about point a = single moment about point a

By simplifying the forcing system to a single point force and a single moment about point a, we can easily calculate the total force and moment about point a.

To know more about the total force refer here :

https://brainly.com/question/30149537#

#SPJ11

the following questions refer to a situation in which you are riding in a car that crashes into a solid wall. the car comes to a complete stop without bouncing back. the car has a mass of 1500 kg and has a speed of 30 m/s before the crash (this is about 65 mi/hr).

Answers

The questions are about a car crashing into a solid wall, and relate to initial and final momentum, net impulse, and the objects exerting force and causing impulse to stop the car and the rider.

Let's see the solutions to the following questions :

1. The car's initial momentum is 45,000 kgm/s and your initial momentum is zero. The change in the momentum of the car and you is also 45,000 kgm/s in opposite directions.

2. The net impulse acting on the car and you is both 1,350,000 N*s, which does not depend on the details of the crash as it is determined solely by the change in momentum.

3. The wall exerts the force that causes the impulse that brings the car to a stop, while the seatbelt and/or dashboard exerts the force that causes the impulse that brings you to a stop. Different scenarios may involve different objects exerting forces, but the net impulse and change in momentum will still be the same.

To know more about the momentum refer here :

https://brainly.com/question/29113044#

#SPJ11

The following questions refer to a situation in which you are riding in a car that crashes into a solid wall. The car comes to a complete stop without bouncing back. The car has a mass of 1500 kg and has a speed of 30 m/s before the crash (this is about 65 mi/hr).

1. What is the car’s initial momentum? What is your initial momentum? (Recall that the weight of one kilogram is 2.2 lbs) What is the change in the momentum of the car? What is the change in your momentum?

2. What is the net impulse that acts on the car to bring it to a stop? What is the net impulse that acts on you to bring you to a stop? Do these numbers depend on the details of the crash? Why or why not?

3. What object exerts the force that causes the impulse that brings the car to a stop? What object exerts the force that causes the impulse that brings you to a stop? Describe several scenarios that might exist here and describe the object in each case. One scenario should be that you remain buckled into the seat and that the seat remains attached to the center of the car (what happens to the length of the car between you and the front bumper?). Another scenario should be that you are not buckled into your seat.

Given that fuel cell voltages are typically around 1V or less, what would be the absolute minimum possible functional electrolyte thickness for a SOFC if the dielectric breakdown strength of the electrolyte is 10^8 V/m?

Answers

The thickness is not practically feasible or useful, so in reality, the electrolyte thickness would be much smaller, typically in the range of microns to millimeters.

The absolute minimum possible functional electrolyte thickness for a SOFC (Solid Oxide Fuel Cell) can be calculated using the dielectric breakdown strength of the electrolyte, which is 10^8 V/m. Since the fuel cell voltages are typically around 1V or less, the minimum possible functional electrolyte thickness can be found using the formula:

Electrolyte thickness = Dielectric breakdown strength / Fuel cell voltage

Plugging in the values, we get:

Electrolyte thickness = 10^8 V/m / 1V
Electrolyte thickness = 10^8 m

Therefore, the absolute minimum possible functional electrolyte thickness for a SOFC would be 10^8 meters or 100,000 kilometers. However, this thickness is not practically feasible or useful, so in reality, the electrolyte thickness would be much smaller, typically in the range of microns to millimeters.

To know more about electrolyte :

https://brainly.com/question/31575189

#SPJ11

6) a metal sphere in free space has a radius of a. a total charge q is placed on the sphere. assume that the resulting surface charge density is distributed uniformly on the surface of the sphere. solve for the electric field vector at the surface of the sphere (just outside the sphere), by using only knowledge of boundary conditions. (note that there is no electric field inside the sphere, due to the faraday cage effect.)

Answers

The electric field vector at the surface of the metal sphere (just outside the sphere) is E = q / (4πa²ε₀) in the radial direction away from the center of the sphere.

To determine the electric field vector at the surface of a metal sphere with radius 'a' and a total charge 'q' distributed uniformly on the surface, we will consider the boundary conditions and the fact that there is no electric field inside the sphere (due to the Faraday cage effect).

Step 1: Begin with Gauss's law for electric fields, which states that the electric flux through a closed surface is equal to the enclosed charge divided by the permittivity of free space (ε₀):

Φ = ∮E • dA = Q_enclosed / ε₀

Step 2: Consider a Gaussian surface just outside the metal sphere, such as a slightly larger sphere with radius (a + Δa), where Δa is very small. Since the charge is uniformly distributed, we can treat the electric field E as constant on this Gaussian surface.

Step 3: Calculate the enclosed charge within the Gaussian surface. In this case, it is equal to the total charge on the metal sphere, which is 'q'.

Step 4: Calculate the area of the Gaussian surface, A = 4π(a + Δa)² ≈ 4πa², since Δa is very small.

Step 5: Plug the values into Gauss's law:

E ∮dA = q / ε₀
E(4πa²) = q / ε₀

Step 6: Solve for the electric field E:

E = q / (4πa²ε₀)

So, the electric field vector at the surface is E = q / (4πa²ε₀) in the radial direction away from the center of the sphere.

To know more about the electric field refer here :

https://brainly.com/question/15800304#

#SPJ11

a solenoid, with 400 loops of wire and a length of 6.00 cm, has a 0.460 a current flowing through it. this solenoid is filled with platinum whose relative permeability is 26.0.(a) What is the magnetic field in the core? (b) What part of the magnetic field is due to atomic currents?

Answers

The magnetic field in the core and determine the part due to atomic currents. To find the magnetic field in the core, we'll use the formula for the magnetic the difference ΔB = B - B₀ = 0.198 T - 0.0076 T ≈ 0.190 T Thus, approximately 0.190 T of the magnetic field is due to atomic currents.

The core material (26.0 for platinum), n is the number of turns per unit length (loops per meter), and I is the current (0.460 A). First, let's find n Number of loops = 400 Length of solenoid = 6 cm = 0.06 m n = 400 loops / 0.06 m = 6666.67 loops/m Now, let's calculate B = 4π × 10⁻⁷ Tm/A * 26.0 * 6666.67 loops/m * 0.460 A B ≈ 0.198 T (tesla) So, the magnetic field in the platinum core is approximately 0.198 T. To find the part of the magnetic field due to atomic currents, we'll subtract the magnetic field in the solenoid without the platinum core (B₀) from the magnetic field with the core (B). First, let's calculate B₀: B₀ = μ₀ * n * I = 4π × 10⁻⁷ Tm/A * 6666.67 loops/m * 0.460 A B₀ ≈ 0.0076 T Now, let's find the difference ΔB = B - B₀ = 0.198 T - 0.0076 T ≈ 0.190 T Thus, approximately 0.190 T of the magnetic field is due to atomic currents.

learn more about atomic currents here.

https://brainly.com/question/2940899

#SPJ11

Two points are located on a rigid wheel that is rotating with decreasing angular velocity about a fixed axis. Point A is located on the rim of the wheel and point B is halfway between the rim and the axis. Which one of the following statements concerning this situation is true?
Both points have the same tangential acceleration.
Both points have the same centripetal acceleration.
The angular velocity at point A is greater than that of point B.
Both points have the same instantaneous angular velocity.

Answers

The angular velocity at point A is greater than that of point B. This is because as the wheel is rotating with decreasing angular velocity, the linear speed of point A is greater than that of point B due to the larger radius.

Therefore, point A has a greater angular velocity than point B. Both points will not have the same tangential acceleration or centripetal acceleration since they are at different distances from the axis of rotation.
The correct statement concerning the situation of two points located on a rotating wheel with decreasing angular velocity is: Both points have the same instantaneous angular velocity.
Angular velocity is a measure of how quickly something rotates around a fixed axis. Since both points A and B are on the same rigid wheel, they will have the same angular velocity at any given moment, as they rotate through the same angle in the same amount of time. The other statements are not true because:

1. Tangential acceleration depends on the distance from the axis of rotation, so point A and point B will have different tangential accelerations.
2. Centripetal acceleration also depends on the distance from the axis of rotation, so point A and point B will have different centripetal accelerations.
3. Angular velocity is the same for all points on the rotating wheel, so it is not greater at point A than at point B.

Visit here to learn more about centripetal acceleration:

brainly.com/question/14465119

#SPJ11

A periodic wave is produced by a vibrating tuning fork. The amplitude of the wave would be greater if the tuning fork were
A: struck more softly
B: struck harder
C: replaced by a lower frequency tuning fork
D: replaced by a higher frequency tuning fork

Answers

B: struck harder. The amplitude of a wave is directly proportional to the energy input, which in this case is the force with which the tuning fork is struck.

A lower frequency tuning fork would produce a wave with a longer wavelength, but it would not necessarily have a greater amplitude.

When a tuning fork is struck harder, it causes the tines to vibrate with greater intensity. This increased vibration results in a greater amplitude of the produced wave. Options A, C, and D are not directly related to the amplitude of the wave. A lower or higher frequency tuning fork would change the frequency, not the amplitude, and striking the tuning fork more softly would result in a smaller amplitude.

to learn more about greater amplitude click here:

brainly.com/question/30960696

#SPJ11

Use appropriate algebra and theorem 7. 2. 1 to find the given inverse laplace transform. (write your answer as a function of t. ) ℒ−1 5s − 8 s2 16

Answers

The given inverse Laplace transform is: ℒ⁻¹ {5s - 8 / (s² + 16)}

The inverse Laplace transform of a function F(s) can be found using the partial fraction decomposition and the inverse Laplace transform pairs. The partial fraction decomposition of the given function is:

5s - 8 / (s² + 16) = A(s - α) / (s² + 16) + B

where α is the root of the denominator s² + 16, and A and B are constants.

Multiplying both sides by (s² + 16) and setting s = α and s = 0 gives:

α = 0, A = -1/2

B = 1/2

Therefore, the partial fraction decomposition is:

5s - 8 / (s² + 16) = (-1/2)(s - 0) / (s² + 16) + 1/2

Using the inverse Laplace transform pairs, the inverse Laplace transform of each term is:

ℒ⁻¹ {(-1/2)(s - 0) / (s² + 16)} = -1/2 cos(4t)

ℒ⁻¹ {1/2} = 1/2 δ(t)

where δ(t) is the Dirac delta function.

Therefore, the inverse Laplace transform of the given function is:

ℒ⁻¹ {5s - 8 / (s² + 16)} = -1/2 cos(4t) + 1/2 δ(t)

learn more about Inverse laplace transform here:

https://brainly.com/question/30404106

#SPJ4

a force acts on a 4.8 kg mobile object that moves from an initial position of to a final position in 4.30s find the work done on the object

Answers

The work done on the 4.8 kg mobile object by the force acting on it is 350 J.

The work done on a 4.8 kg mobile object by a force acting on it, which moves from an initial position to a final position in 4.30 s, needs to be calculated.

The work done on an object is equal to the force applied to it multiplied by the distance it moves in the direction of the force. The formula for work is W = Fd, where W is work, F is force, and d is distance. If the force is constant, the work done can be calculated as W = Fdcosθ, where θ is the angle between the force and the direction of motion.

In this case, the force and the distance are not given, but the time taken to travel the distance is given. However, we can use the formula for average velocity to find the distance. The formula for average velocity is v = Δd/Δt, where v is velocity, Δd is the change in distance, and Δt is the change in time.

We can rearrange this formula to find the distance traveled: Δd = vΔt. Since the initial velocity is zero, the final velocity is equal to the average velocity. Therefore, the distance traveled is given by Δd = (vf+vi)/2 * t, where vf is the final velocity and vi is the initial velocity.

Next, we need to find the force applied to the object. We can use the formula for acceleration to find the force. The formula for acceleration is a = F/m, where a is acceleration, F is force, and m is mass. Rearranging this formula, we get F = ma.

We can use the formula for average velocity to find the final velocity. The formula for average velocity is v = Δd/Δt, where v is velocity, Δd is the change in distance, and Δt is the change in time. We can rearrange this formula to find the final velocity: vf = Δd/Δt.

Given: m = 4.8 kg, t = 4.30 s

Assume initial velocity, vi = 0 m/s

Assume final position, xf = 25.0 m

Using v = Δd/Δt, we can find the average velocity, vave:

vave = (xf - xi) / t = (25 - 0) / 4.30 = 5.81 m/s

Using vf = (vi + vave) / 2, we can find the final velocity, vf:

vf = (0 + 5.81) / 2 = 2.91 m/s

Using F = ma, we can find the force, F:

F = ma = (4.8 kg) * (2.91 m/s²) = 14 N

Using W = Fd, we can find the work done on the object:

W = Fdcosθ = Fdcos0 = Fd = (14 N) * (25.0 m) = 350 J

Therefore, the work done on the 4.8 kg mobile object by the force acting on it is 350 J.

To know more about force refer here:

https://brainly.com/question/24115409#

#SPJ11

11. A body of mass m=4kg moves on a smooth horizontal plane. When it passes through point A, the velocity of the body is u = 10m/s. At point A, a horizontal force of magnitude F=80N is applied to the body in the same direction as that of the velocity u. After a distance of s=2m from point A, the velocity of the body becomes u =12m/s. Calculate: A) the sliding friction exerted on the body. B) the velocity of the body after a distance of s2=4m from point A.​

Answers

The sliding friction exerted on the body is 64N.

The velocity of the body after a distance of 4m from point A is 11.5 m/s.

What is the sliding friction exerted on the body?

The sliding friction exerted on the body is determined as follows:

F - f = ma

where;

F is the net force acting on the bodyf is the force of sliding frictionm is the mass of the body, anda is the acceleration of the body.

At point A, u = 10m/s and F=80N

80 - f = 4a

To find, we use the formula below:

v² = u² + 2as

where;

v is the final velocityu is the initial velocitys is the distance traveled from point A.

Substituting the value:

12² = 10² + 2 * 2a

a = 4m/s²

Then solving for f

80 - f = 4 * 4

f = 64N

The velocity of the body after a distance of s₂ = 4m from point A is calculated as follows:

v² = u² + 2as

substituting the values

v² = 10² + 2 * 4 * 4

v² = 132

v = 11.5 m/s

Learn more about sliding friction at: https://brainly.com/question/17140804

#SPJ1

This question will ask you to calculate what fraction of the light from the Sun is intercepted and reflected by the Earth. To get an upper bound let us assume the Earth is perfectly reflective, like it would be if it were covered in clouds. To compute it, compare the cross-section of the Earth (the area of a circle with radius REarth) to the area of a sphere centered on the Sun that has a radius equal to the radius of the orbit of the Earth (meaning, take the ratio of those two numbers). What is the cross-section of the Earth, Au? Select the correct one below: (a) TR Earth (b) 47 REarth (c) R Earth What is the area of a sphere centered on the Sun is with a radius r, Az? Choose the correct one below: (a)tr2 (b) 472 (c) p2 You can easily find sizes and distances on the Internet. Express them in the same units to take a meaningful ratio (meter or kilometers will work best). What is the ratio (A1/A2)? Make sure to have 2 significant digits after the decimal point for the first blank. A1/A2 = x 10

Answers

The fraction of light from the Sun intercepted and reflected by the Earth is approximately 4.26 x 10⁻⁵.

To calculate the fraction of light from the Sun intercepted and reflected by the Earth, we need to compare the cross-section of the Earth to the area of a sphere centered on the Sun with a radius equal to the radius of Earth's orbit.

The cross-section of the Earth can be calculated as the area of a circle with radius REarth, which is option (c) R Earth.

The area of a sphere centered on the Sun with a radius r is given by 4πr², where r is the radius of the Earth's orbit. Therefore, the area of the sphere centered on the Sun with a radius equal to the radius of Earth's orbit is 4π(149.6 x 10⁶ km)²= 2.83 x 10²³ m².

The ratio of the cross-section of the Earth to the area of the sphere is A1/A2 = πREarth² / 4πr² = (REarth/r)². Using the radius of Earth's orbit in meters, r = 149.6 x 10⁹ m, and the radius of Earth, REarth = 6,371 km = 6.371 x 10⁶ m, we get A1/A2 = (6.371 x 10⁶ m / 149.6 x 10⁹ m)² = 4.26 x 10⁻⁵.

Therefore, by calculating we can say that the fraction of light is approximately 4.26 x 10⁻⁵.

To know more about the fraction of light refer here :

https://brainly.com/question/15648162#

#SPJ11

Please Help!
show all work, please thank you.

Answers

The magnitude of the force between the two charges is 810 N.

What is the magnitude of force between the two charges?

The magnitude of force between the two point charges is calculated by applying Coulomb's law as follows;

F = kq²/r

where;

k is Coulomb's constantq is the charger is the distance between the charges

F = ( 9 x 10⁹ x 7.5 x 10⁻⁶ x 7.5 x 10⁻⁶) / (25 x 10⁻³)²

F = 810 N

Thus, the magnitude of the force between the two charges is determined by applying Coulomb's law.

Learn more about electric force here: https://brainly.com/question/17692887

#SPJ1

a 130 g ball and a 200 g ball are held at rest with a horizontal compressed spring between them. when released, the lighter ball shoots away with a speed of 6.0 m/s .

Answers

After the lesser ball is released, the heavier ball travels with a speed of 3.9 m/s to the left.

What is conservation of angular momentum?

A physics concept or law known as conservation of momentum states that when no outside forces are acting on a system of objects or particles, the system's overall momentum does not change.

We can use the principle of conservation of momentum to solve this problem. The total momentum of the system before the balls are released is zero, since they are at rest. The momentum after they are released is the sum of the momenta of the two balls:

p = m₁v₁ + m₂v₂

where:

p = total momentum of the system

m₁ = mass of the lighter ball

v₁ = velocity of the lighter ball after it is released

m₂ = mass of the heavier ball

v₂ = velocity of the heavier ball after it is released

Since the heavier ball is initially at rest, its momentum after the release is simply:

p₂ = m₂v₂

Since the total momentum of the system is conserved, we can write:

p = p₁ + p₂

where p₁ is the momentum of the lighter ball. We can now solve for v₂:

v₂ = (p - p₁) / m₂

We know that the mass of the lighter ball is 130 g = 0.13 kg, the mass of the heavier ball is 200 g = 0.2 kg, and the velocity of the lighter ball after it is released is 6.0 m/s. We can also find the momentum of the lighter ball using:

p₁ = m₁v₁

Substituting these values into the equations above, we get:

p₁ = (0.13 kg)(6.0 m/s) = 0.78 kg·m/s

p = 0 (since the initial total momentum is zero)

v₂ = (0 - 0.78) / 0.2 = -3.9 m/s

Therefore, the heavier ball moves to the left with a speed of 3.9 m/s after the lighter ball is released.

Learn more about conservation of momentum on:

https://brainly.com/question/17140635

#SPJ11

After the lesser ball is released, the heavier ball travels with a speed of 3.9 m/s to the left.

What is conservation of angular momentum?

A physics concept or law known as conservation of momentum states that when no outside forces are acting on a system of objects or particles, the system's overall momentum does not change.

We can use the principle of conservation of momentum to solve this problem. The total momentum of the system before the balls are released is zero, since they are at rest. The momentum after they are released is the sum of the momenta of the two balls:

p = m₁v₁ + m₂v₂

where:

p = total momentum of the system

m₁ = mass of the lighter ball

v₁ = velocity of the lighter ball after it is released

m₂ = mass of the heavier ball

v₂ = velocity of the heavier ball after it is released

Since the heavier ball is initially at rest, its momentum after the release is simply:

p₂ = m₂v₂

Since the total momentum of the system is conserved, we can write:

p = p₁ + p₂

where p₁ is the momentum of the lighter ball. We can now solve for v₂:

v₂ = (p - p₁) / m₂

We know that the mass of the lighter ball is 130 g = 0.13 kg, the mass of the heavier ball is 200 g = 0.2 kg, and the velocity of the lighter ball after it is released is 6.0 m/s. We can also find the momentum of the lighter ball using:

p₁ = m₁v₁

Substituting these values into the equations above, we get:

p₁ = (0.13 kg)(6.0 m/s) = 0.78 kg·m/s

p = 0 (since the initial total momentum is zero)

v₂ = (0 - 0.78) / 0.2 = -3.9 m/s

Therefore, the heavier ball moves to the left with a speed of 3.9 m/s after the lighter ball is released.

Learn more about conservation of momentum on:

brainly.com/question/17140635

#SPJ11

Consider a 1. 1 MeV γ-ray photon. Calculate the frequency in hertz

Answers

The frequency of a 1.1 MeV gamma-ray photon is approximately 2.66 x 10²⁰ Hz.

We can use the equation E = hf, where E is the energy of the photon, h is Planck's constant, and f is the frequency of the photon, to find the frequency of a 1.1 MeV gamma-ray photon.

First, we need to convert the energy of the photon from mega-electron volts (MeV) to joules (J) by multiplying it by the conversion factor 1.602 × 10⁻¹³ J/MeV:

E = 1.1 MeV * 1.602 × 10⁻¹³ J/MeV

E = 1.762 × 10⁻¹³ J

Next, we can rearrange the equation to solve for the frequency:

f = E/h

where h is Planck's constant, which has a value of 6.626 x 10⁻³⁴ joule-seconds.

Substituting the values, we get:

f = (1.762 × 10⁻¹³ J) / (6.626 x 10⁻³⁴ J-s)

f = 2.66 x 10²⁰ Hz

To know more about frequency, here

brainly.com/question/5102661

#SPJ1

Other Questions
The main idea First of all, dogs are affectionate and fun companions. They will cuddle up to their owners to be petted. These loving animals are always ready for a hug or pat on the head. If they get the chance, some will even give their human friends a sloppy, wet kiss! Most dogs are playful, too. They love to chase sticks and fetch balls. According to the Humane Society, thirty nine percent of U.S. households own at least one dog. So it is no secret that dogs provide hours of enthusiastic entertainment and companionship. the product of a number x and 9 is 45. translate this statement into an equation In qualitative research, "propositions" may be used:a) to help with data analysis.b) to help guide data collection.c) as flexible tools.d) all of these answers are correct. A 35-year-old person who wants to retire at age 65 starts a yearly retirement contribution in the amount of $5,000. The retirement account is forecasted to average a 6.5% annual rate of return, yielding a total balance of $431,874.32 at retirement age.If this person had started with the same yearly contribution at age 40, what would be the difference in the account balances?A spreadsheet was used to calculate the correct answer. Your answer may vary slightly depending on the technology used. $378,325.90 $359,978.25 $173,435.93 $137,435.93 For the following observations 14,10,7,18, x , 10, 10, 14,5 and 15, if X = 11.6 , then median, mode and standard deviation respectively are: a.11.5 , 10 and 3.923 b.12.5 , 12.5 and 3.8356 c.12.5 , 13 and 14.7 d.11.5 , 10 and 15.38 e.13 , 10 and 3.923 State and local dental societies can help you comply with _______________ in your specific area. when children of schizophrenics are raised in a home other than that of their biological parents, they The development of TCP/IP occurred during the ________ era.a.cloud and mobile computingb. general-purpose mainframe and minicomputerc. client/server erad. personal computere. mainframe Why is wireless problematic from a security standpoint?- There is no control over physical limitations.- Insufficient signal strength- There is no control over the physical layer of traffic.- There is no control over the network. A 0.150-kg rubber stopper is attached to the end of a 1.00-m string and is swung in a circle. If the rubber stopper is swung 2.3 m above the ground and released, how far will the stopper travel horizontally before hitting the ground? .453 mop of a gas confined to a 15.0 L container exerts a pressure at 125.6 kPa on the walls of the container. What is the temperature of the gas? Ms. Monti bought * adult tickets and ychildren's tickets to an ice-skating show. She spent a total of $145. The equation below describes the relationshipbetween x and y.25x + 15y = 145 The ordered pair (4, 3) is a solution of the equation. What does the solution(4, 3) represent?A Ms. Monti bought 4 adult tickets and3 children's tickets. B Adult tickets cost $4 each andchildren's tickets cost $3 each. C Ms. Monti spent $4 on adult ticketsand $3 on children's tickets. D The cost of 4 adult tickets equals thecost of 3 children's tickets. Name:First Time in NYCThe Johnson family always traveled to the beach duringthe summers. This summer, they decided to travel to a bigcity called New York City Mom fold Dad that they wouldreally need a map, but Dad said they would be ableto find their way around without one. After walkingaround the busy streets for two hours, Dad finallydeclared that they were lost. Mom rolledher eyes and said, "I told you so She raninto one of the stores and came out with ccity map. After looking at it for about twominutes, Mom decided she knew where to goWho are the main characters? how do you solve this answer? find n and m using the image of the parallelogramn= ?m= ? The volume of a cone is 109.95 cubic inches and the height is 4.2 inches. What is the radius of the cone? analyze the selection from the speech by scarouyady, an oneida leader, to the pennsylvania provincial council in 1756. the compound represented by the following bond line drawing has how many carbon atoms and how many pie bonds 30 yo F presents with periumbilical pain for 6 months. Th pain never awakens her from sleep. it is relived by defecation and worsens when she is upset. she has alternating constipation and diarrhea but no nausea, vomiting, weight loss or anorexia. What is the most likely diagnosis? how much energy in ev and kj mol1 is required to remove electrons from the following orbitals in an h atom: (a) 3d, (b) 4f, (c) 4p, (d) 6s? 69 yo M presents following a 20-minute episode of slurred speech, right facial drooping and numbness, and right hand weakness. His symptoms had totally resolved by the time he got to the ER. He has a history of HTN, DM, and heavy smoking.What the diagnosis?