The rate of effusion and the square root of molar mass is inversely proportionate .
Which molecule could have the higher rate of effusion?The lighter a gas is, the quicker it will rave; the heavier a gas is, the quieter it will effuse. Of all the choices, helium (He) has the lowest molecular weight (atomic weight in this case), so it will have the most elevated rate of effusion.
The molar mass of nitrogen is more inferior than the molar mass of oxygen. Hence, the rate of effusion of nitrogen is more elevated than the rate of effusion of oxygen.
To learn more about the rate of effusion visit the link
https://brainly.com/question/8804761
#SPJ4
Why is the petroleum ether placed in an ice water bath prior to washing the product on the filter?
Before washing the substance on the filter, petroleum ether is poured into an ice water bath to assist stop the product from dissolving.
Re-crystallization procedures only work based on the solubility properties of the compound of interest. The re-crystallization experiment cannot be performed using a solvent if the compound of interest is not soluble in it. For example, if I chose petroleum ether as my solvent instead of water, my recrystallization experiment will not work because acetanilide is not at all soluble in petroleum ether. In order for my recrystallization experiment to be successful, I need an efficient solvent for acetanilide. Acetanilide should only be dissolved by this solvent at temperatures above room temperature. Additionally, my solvent for acetanilide should be soluble for the impurities species at all temperatures. Since petroleum ether does not meet these requirements, the experiment will not be successful with petroleum ether.
Petroleum ether may not react with the product on the filter, however, the majority of organic molecules are generally non-polar and soluble in petroleum ether. Temperature lowers solubility Petroleum ether is cooled in an ice water bath to stop the product from dissolving in the solvent.
Learn more about ether here:
https://brainly.com/question/20772030
#SPJ4
you use 25% ethyl acetate (an ester) in hexane to run a tlc and obtain a single round spot with an rf of 0.9 for the main compound. what would you do?
Try 25% ethyl acetate to see the results, this is because adding more ethyl acetate will increase the polarity and the compounds get easily separated.
In TLC, the polarity between the stationary phase and mobile phase is the basis for mixture separation. In accordance with the "like dissolves like" principle, polar substances can only dissolve in other polar substances, while non-polar substances may only dissolve in other non-polar substances.
Consequently, when two compounds with different levels of polarity are present, the more polar molecule interacts with silica more strongly and is, therefore, better able to displace the mobile phase from the accessible binding sites. The less polar compound thus travels higher up the plate (resulting in a higher Rf value).
However, changing the mobile phase to a more polar solvent or a mixture of solvents improves binding to the polar plate and thereby displaces solutes from it, causing all compounds on the TLC plate to rise higher up the plate. It is a prevalent belief that although "weak" eluents hardly move the examined compounds, "strong" eluents drive them up the plate.
Therefore, all compounds move longer and have a larger Rf when a mobile phase is made more polar than it was originally.
Since hexane has a non-polar property while ethyl acetate has a polar property. As a result, adding 35% ethyl acetate will enhance the polarity, making it easier to separate the compounds.
For more information on ethyl acetate click on the link below:
https://brainly.com/question/18993490
#SPJ4
What discoveries were made by j. j. thomson, henri becquerel, and lord rutherford? how did dalton's model of the atom have to be modified to account for these discoveries?
Discoveries were made by j. j. thomson, henri becquerel, and lord rutherford.
What is Dalton's atomic model?
John Dalton, an English physicist and chemist, proposed the atomic hypothesis in 1808 as a scientific theory about the composition of matter. It claimed that tiny, indivisible particles called "atoms" make up all substance.
Almost all of chemistry at the time could be explained by Dalton's atomic model, a relatively straightforward combinatorial concept that paved the way for later advancements and advances in this and many other scientific domains. Postulates of the Dalton Model
Modern atomic theory and the discovery of the electron and proton were made possible by Thomson's cathode ray discharge experiment and Rutherford's scattering experiment.
Dalton's concept was groundbreaking at the time and provided a wealth of information for young chemists to study. Many people contributed to the modification of the Atomic theory following Dalton, including Chadwick, JJ Thompson, Ernest Rutherford, Niels Bohr, and others. Later, Rutherford worked on the model to find the nucleus while JJ Thompson made the electron discovery.
To learn more about Dalton's atomic model from the given link below,
https://brainly.com/question/15507302
#SPJ4
arrange the following amines in order of decreasing water solubility, putting the most soluble amine first.
Amines in order of decreasing water solubility, putting the most soluble amine first is 2, 1, 3.
What is the solubility of amine in water?
Hydrogen bonding between water molecules and lower aliphatic amines are possible. These amines are therefore water soluble.
The molar mass of amines increases with an increase in the size of the hydrophobic alkyl component. Its solubility in water is often reduced as a result. Higher amines cannot be dissolved in water. Alcohol, benzene, and ether are examples of organic solvents that easily dissolve amines.
To learn more about solubility of amines click the given link
https://brainly.com/question/19738583
#SPJ4
Consider two samples of water of equal mass; one that is at 20. 0 °c and the other is at 30. 0 °c. Please compare the volume of these two water samples, and explain how you determined this conclusion.
The volume of water at 30°C will be more than the volume of water at 20 °C because of the property of thermal expansion.
We generally observe that objects around us expand on heating.
Expansion due to heating is known as thermal expansion. It is of the following 3 types-
Increase in Length - Linear ExpansionIncrease in Area - Area ExpansionIncrease in Volume - Volume ExpansionWhen a liquid like water is heated from a lower temperature to a higher temperature its volume expands which means that it undergoes volume expansion.
Thus, The volume of water at 30°C will be more than the volume of water at 20°C because of the property of thermal expansion.
To know more about "thermal expansion", refer to the following link:
https://brainly.com/question/14092908?referrer=searchResults
#SPJ4
Calculate the maximum concentration (in m) of silver ions (ag ) in a solution that contains of co32-. the ksp of ag2co3 is
Acetylcholinesterase equilibrium equation is Ag2CO3(s) <---> 2 Ag+(aq) + CO32-(aq)
What is Acetylcholinesterase ?Following the transmission of information between two nerve cells or neurons, the neurotransmitter acetylcholine is hydrolyzed by the enzyme acetylcholine esterase. Choline and acetate result from the breakdown of acetylcholine (also called acetic acid). Acetate will permeate the presynaptic cell's membrane and choline will travel through it to allow for the reuse of the components.
In order for a muscle cell to contract, acetylcholine transmits a signal from a nerve cell to its receptors. A breakdown of the acetylcholine is then performed to prevent misunderstanding with brand-new neurotransmitters.
Due to their potent acetylcholinesterase inhibitory properties (see parasympathomimetic), many nerve agents and neurotoxins have the ability to constantly induce the contraction of muscle cells. This can cause death when consumed in big numbers.
To learn more about Acetylcholinesterase from he given link:
https://brainly.com/question/6148688
#SPJ4
Ignoring the sign, which has a greater magnitude of charge?
A.) Electron
B.) Proton
C.) They have equal charges
D.) Not enough information
Answer:
C.) They both have equal charges.
Explanation:
Ignoring the signs, both a proton and electron have a charge of 1.
A proton has a greater magnitude of charge than an electron.
Both protons and electrons have charges, but the magnitudes of their charges are different. A proton carries a positive charge of +1 elementary charge, while an electron carries a negative charge of -1 elementary charge. The elementary charge is the fundamental unit of electric charge. Despite the opposite signs of their charges, the magnitudes are equal, and both charges have the same strength.
Therefore, when ignoring the sign of the charges and considering only their magnitudes, a proton has a greater magnitude of charge compared to an electron. The magnitude of the proton's charge is equal to that of the electron's charge. This is a fundamental property in the realm of electric charges, and it plays a critical role in various physical and chemical interactions, including the behavior of atoms, molecules, and electromagnetic forces.
To learn more about magnitude of charge, here
https://brainly.com/question/32470813
#SPJ3
examine the following order of elution of compounds containing certain functional groups from fastest to slowest, and indicate which mistake has been made.hydrocarbons, olefins, ethers, amines, ketones, aldehydes, esters, alcohols, aromatics, and carboxylic acids
On examining the following order we can say that ethers and esters got switced.
Alkyl halides, saturated hydrocarbons, unsaturated hydrocarbons, ethers, esters, ketones, amines, alcohols, phenols, and acids are typically eluted from columns in the following order. Salts and polymeric substances frequently do not elute. From fastest to slowest elution, the following substances are roughly in order based on polarity: hydrocarbons, olefins, ethers, halocarbons, aromatics, ketones, aldehydes, esters, alcohols, amines, and acids.
Be aware that regardless of the polarity of the compounds, the more polar the solvent, the quicker the chemicals elute. This means that the order in which chemicals elute from a TLC or column cannot be altered by altering the solvent's polarity. So, on examining the following order we can say that ethers and esters got switced.
Learn more about ethers here:
https://brainly.com/question/18270903
#SPJ4
Some help me with this chem question
Answer:
C
Explanation:
because it is the only one that will give you an accurate answer.
to use tlc, it is necessary to be able to see where the spots are after eluting and drying the plate. which of the following are possible ways to see where the compounds are on the plate. most compounds make complexes when exposed to iodine vapor, and the iodine is intensely colored. some compounds are naturally colored, so you just need to look.
To use tlc, it is necessary to be able to see where the spots are after eluting and drying the plate.
What is TLC?
Non-volatile mixtures can be separated using the chromatography technique known as thin-layer chromatography (TLC). On a piece of glass, plastic, or aluminium foil that has been covered with a thin layer of an adsorbent substance—typically silica gel, aluminium oxide (alumina), or cellulose—thin-layer chromatography is carried out.
As a quick and non-destructive technique, using UV light to identify spots (compounds) on a TLC plate is quite popular. UV light is significantly absorbed by aromatic systems and highly conjugated systems. The majority of TLC plates include zinc sulphide, which gives them a green appearance when exposed to short-wavelength UV.
Iodine sublimes and reacts with the compounds on the TLC plate when the plate is placed in the chamber and covered, producing yellow-brown blotches (Figure 2.33d). Iodine interacts with numerous chemical molecules to produce colourful complexes, which causes the colouring. About half of the possible chemicals will work with this stain.
To learn more about TLC from the given link below,
https://brainly.com/question/24082436
#SPJ4
Which two phase transitions can liquid undergo? (2 answers)
A. melting
B. depostion
C. vaporization
D. freezing
E. sublimation
Sf3 , has a tetrahedral electron-pair geometry and a trigonal-pyramidal molecular geometry. the hybridization of the central sulfur atom is ________.
Sf3 , has a tetrahedral electron-pair geometry and a trigonal-pyramidal molecular geometry. the hybridization of the central sulfur atom is 5.
What do you mean by hybridization?Hybridization in Chemistry is defined as concept of mixing two atomic orbitals to give rise to a new type of hybridized orbitals. This intermixing usually results in formation of hybrid orbitals having entirely different energies, shapes, etc. The atomic orbitals of same energy level mainly take part in hybridization. However, both the fully filled and half-filled orbitals can also take part in this process, provided they have equal energy.
On the other hand, we can say that concept of hybridization is an extension of the valence bond theory and it helps us to understand the formation of bonds, bond energies and bond lengths.
Redistribution of energy of orbitals of individual atoms to give orbitals of equivalent energy happens when two atomic orbitals combine to form a hybrid orbital in a molecule. This process is called hybridization. During process of hybridization, atomic orbitals of comparable energies are mixed together and mostly involves the merging of two ‘s’ orbitals or two ‘p’ orbitals or mixing of an ‘s’ orbital with a ‘p’ orbital as well as ‘s’ orbital with a ‘d’ orbital. The new orbitals thus formed are known as the hybrid orbitals. More significantly, hybrid orbitals are quite useful in the explaining atomic bonding properties and molecular geometry.
Here is a formula to find the hybridization:
(V+M-C+A)/2
(6+3–0+1)/2 = 5
Hybridization: sp3d
Geometry: Trigonal Bipyramidal
Shape: T-shaped
V is the valence electrons of the central atom.
M is the number of monovalent atom (which makes single bond with central atom).
C and A are number of the cation and the anion.
To know more about hybridization visit: https://brainly.com/question/14140731
#SPJ4
Lauryn serves a volleyball with a mass of 2.1 kg. The ball leaves her hand with a speed of 30 m/s. Find the energy of the ball.
Answer: 1/2 X 2.1 kg X 30m/s^2 = 945 Joules
Explanation:
based on the graph witch data point is most likey to have experimental error?
james chadwick discovered this particle, which was the last of the subatomic particles to be characterized.
James chadwick discovered this particle neutron also neutrino called as is last of the subatomic particles to be characterized.
In 1932 james chadwick announced that the core also contained a new uncharged particle, which he called the neutron. neutron is also called neutrino he proved the existence of neutrons elementary particles devoid of any electrical charge. james chadwick was an English physicist who was awarded the 1935 Nobel prize in physics for his discovery of the neutron in 1932.
Know more about last of the subatomic particles
https://brainly.com/question/28537523
#SPJ4
The moon diameter is about one quarter the diameter of the earth. If
Answer:
The Moon has a diameter of 2,159 miles (3,476 kilometers) and is about one-quarter the size of Earth. The Moon weighs about 80 times less than Earth.
Explanation:
Manganese is composed of two stable isotopes: Mn-54 and Mn-57. Use the periodic table
and predict which of these isotopes is more abundant. Explain your prediction.
Why is the mass in amu of a carbon atom reported as 12.011 in the periodic table of the
elements?
The more abundant isotope of manganese is Mn-54 because the average atomic mass of manganese is 54.938 amu.
What are isotopes?The term isotopes refers to the fact that atoms of an element are not exactly alike. The atoms of an element has the same atomic number (which is the signature of the element) but not the same mass number. The mass number of the element has to do with the number of neutrons.
Now we know that the atomic mass of elements is not a whole number because of the existence of isotopes. The relative atomic masses is obtained as the sum of the products of the atomic mass and the relative abundance of each isotope.
The more abundant isotope of manganese is Mn-54 because the average atomic mass of manganese is 54.938 amu.
The reason why the relative atomic mass of the carbon atom is 12.011 in the periodic table of the elements is because this is the weighted average of the masses of all the isotopes of carbon,
Learn more about isotopes:https://brainly.com/question/11680817
#SPJ1
If a 500 ml sample of water contains 2.6 x 10-6 g of iron, what is the concentration of iron in ppb?
a. 5.2 ppb
b. 5.2 x 10-7 ppb
c. 5200 ppb
d. 5.2 x 10-3 ppb
The concentration of iron in ppb is 5.2 ppb
In atmospheric chemistry, PPM( parts per million) and PPB( parts per billion) units are used to express the concentration of gases. PPB stands for parts per billion, while PPM stands for parts of gas per million parts of air.
2.6 × 10⁻⁶ grams of iron in 500 ml of water.
Now, converting milliliter into liter:
500 mL = 500 mL × ( 1L / 1000 mL ) = 0.5 L
Now for ppm, mass must be in mg.
2.6 × 10⁻⁶ grams = 2.6 × 10⁻⁶ grams × ( 1000 mg / 1 grams ) = 2.6 × 10⁻³ mg
Then, the concentration of iron in ppm will be:
2.6 × 10⁻³ mg / 0.5 L = 5.2 × 10⁻³ ppm
Now, 1 ppm = 1000 ppb
Therefore,
5.2 × 10⁻³ ppm × 10³ = 5.2 ppb
Learn more about concentration here:
brainly.com/question/17206790#:~:text=15%20people%20helped-,Answer%3A,either%20solvent%20or%20total%20solution.
#SPJ4
which of the following statements are true about the properties of both molecular and ionic compounds? select all that apply.
They are neutrally charged
They typically do not conduct electricity in solid state
Molecular compounds are formed when elements share electrons in a covalent bond to form molecules.Ionic compounds are formed by the strong electrostatic interactions between the ions.Ionic compounds have high boiling and meltin point and electrical conductivity than covalent compounds.Eventhough,the molecular compounds and ionic compounds have some similarities in their properties.They both are electrically neutral.The molecules formed due to both molecular and ionic compound are electrically neutral.In ionic bonding,the two charges join and cancel each other out,and in covalent bonding,two electrically neutral components come together.So,both the compounds are electrically neutral.Ionic compounds conducts electricity in aqueous or molten solution,it is because of their ions are very free to move.Ionic compounds do not conduct electricity in solid state.Molecular or covalent compounds do not conduct electricity either in pure form or when dissolved in water.Molecular compounds do not conduct electricity because they do not transfer electrons unless they reacts.To know more about molecular compounds visit : https://brainly.com/question/23088724
#SPJ4
consider the reaction . how much carbon dioxide (co2) is produced in the complete combustion of 100.0 g of methane (ch4)? c
The mass of CO2 produced is 275 g.
What is combustion?The term combustion refers to the situation in which a substance is burnt in oxygen. We have to first write down the equation of the reaction as follows;
[tex]CH_{4} + 2O_{2} ---- > CO_{2} + 2H_2}O[/tex]
Number of moles of methane = 100.0 g / 16 g/mol = 6.25 moles
Now;
1 mole of methane produces 1 mole CO2
6.25 moles of methane produces 6.25 moles of CO2
Mass of CO2 = 6.25 moles * 44 g/mol
= 275 g
Learn more about combustion:https://brainly.com/question/15117038
#SPJ4
Taking into account the reaction stoichiometry, 275 grams of CO₂ are formed in the complete combustion of 100.0 g of methane.
Reaction stoichiometryIn first place, the balanced reaction is:
CH₄ + 2 O₂ → CO₂ + 2 H₂O
By reaction stoichiometry (that is, the relationship between the amount of reagents and products in a chemical reaction), the following amounts of moles of each compound participate in the reaction:
CH₄: 1 moleO₂: 2 molesCO₂: 1 mole H₂O: 2 molesThe molar mass of the compounds is:
CH₄: 16 g/moleO₂: 32 g/moleCO₂: 44 g/moleH₂O: 18 g/moleThen, by reaction stoichiometry, the following mass quantities of each compound participate in the reaction:
CH₄: 1 mole ×16 g/mole= 16 gramsO₂: 2 moles ×32 g/mole= 64 gramsCO₂: 1 mole ×44 g/mole= 44 gramsH₂O: 2 moles ×18 g/mole= 36 gramsMass of CO₂ formedThe following rule of three can be applied: if by reaction stoichiometry 16 grams of CH₄ form 44 grams of CO₂, 100 grams of CH₄ form how much mass of CO₂?
mass of CO₂= (100 grams of CH₄× 44 grams of CO₂)÷ 16 grams of CH₄
mass of CO₂= 275 grams
Finally, 275 grams of CO₂ are formed in the complete combustion of 100.0 g of methane.
Learn more about the reaction stoichiometry:
brainly.com/question/24741074
brainly.com/question/24653699
#SPJ4
6. Makes sure that oxygen is absorbed into
the blood.
a. Circulatory System
b. Digestive System
c. Respiratory System
d. Excretory System
According to the kinetic molecular theory, where does the pressure exerted by a gas in a container come from?
collisions between the gas particles and the walls of the container.
What is kinetic molecular theory?
The assumption that matter is made up of microscopic particles that are always in motion forms the foundation of the kinetic-molecular theory, which explains the states of matter. The observable characteristics and behaviours of solids, liquids, and gases are explained by this theory. We can better comprehend why matter exists in different stages (such as solid, liquid, and gas) and how it can transition from one stage to another thanks to the kinetic theory of matter. One may also think about various properties of matter using the kinetic theory of matter.
Therefore,
According to the kinetic molecular theory, where does the pressure exerted by a gas in a container come from collisions between the gas particles and the walls of the container.
To learn more about kinetic molecular theory from the given link:
https://brainly.com/question/134712
#SPJ4
The density of steel is about 8.0g/cm³ and the density of water is 1.0 g/cm³ . If the mass of steel used for the ship is 50,000 kg, what would the volume need to be for the ship to float on water?
In order for the ship to float, the volume of the ship must be equal to or greater than 50,000,000 cm³.
What would be the volume of the ship in order for it to float on water?According to the principle of floatation, a body will float in a liquid if it displaces a weight of liquid equal to its own weight.
Therefore, for the ship to float in water, it must displace a weight of water at least equal or greater than its own weight.
Considering the data given:
The density of steel = 8.0g/cm³
the density of water is 1.0 g/cm³
the mass of steel used for the ship = 50,000 kg
Based on the principle of floatation, mass of water to be displaced is equal to the mass of the ship.
Mass of water to be displaced = 50000 kg
Mass of water to be displaced in g = 50,000,000 g
Volume of 50000000 g of water = 50,000,000 g * 1.0 g/cm³
Volume of 50000000 g of water = 50,000,000 cm³
Therefore, volume of the ship must be equal to or greater than 50,000,000 cm³ for the ship to float.
Learn more about principle of floatation at: https://brainly.com/question/17032479
#SPJ1
describe how private citizens have a voice in which projects the federal government will fund.
Explanation:
Two main ways, free elections, casting your vote for the candidate supporting your goals. Second, Lobbying the sitting gov.
round off the following numbers to three significant figures.
1.) 4325
2.) 7.8939
Answer:
1) 433 (check screenshot)
2) 7.89
write and explain ten careers opportunity in chemistry
Chemistry careers range in nature, pay, and educational requirements;
Chemical analyst
An analytical chemist analyses the composition and quantity of substances as well as how these elements may behave and interact with one another.
Which nation offers the finest jobs in chemistry?Germany is the #1 destination for chemistry students looking to study abroad since it is known for its accommodating attitude toward foreign students. Due to Germany's dominance in Europe's chemical industry, several institutions there offer specialised courses designed for graduates who want to get into the workforce.
MSc. which the industries desire. For their senior scientist positions, most firms demand Ph.D. and post-doctoral fellows.
Engineer, Chemical
Designing and creating new goods from raw materials and changing materials' states are specialties.
as in the production of plastic from oil. Chemical engineers may work in practically any business, helping to create cutting-edge, high-end goods like biocompatible implants and ultra-strong materials.
learn more about Chemistry careers refer
https://brainly.com/question/17510922
#SPJ9
A water skier has a mass of 79 kg and accelerates at 1.4 m/s/s what is the net force acting on him ?
The net force acting on water skier is 110.6N.
Equation :To find net force on a water skier we can use the formula,
net force = mass x acceleration
F = m x a
Given in equation,
F = ?
m = 79 kg
a = 1.4 m/s²
Putting the values,
F = 79 kg x 1.4 m/s²
F = 110.6N
Net Force :The overall forces acting on an object is known as the net force. A mass can accelerate due to net force. A body is subject to another force whether it is at rest or in motion. When there are a lot of forces acting on a system, the term "net force" is used.
To know more about mass :
https://brainly.com/question/19694949
#SPJ9
If the solutions of nabr and hg(no3)2 are mixed, how many precipitation reactions will there be?
If the solutions of NaBr and Hg(NO₃)₂ are mixed, there will be one precipitation reaction.
What is a Precipitation Reaction?When dissolved substances react, one (or more) solid products are created, which is termed a precipitation reaction. These kinds of reactions, which are also occasionally known as double displacement, double replacement, or metathesis reactions, frequently involve the exchange of ions between ionic compounds in aqueous solutions.The development of a solid form residue known as the precipitate occurs during precipitation reactions, which are typically double displacement processes.Additionally, when two or more solutions containing various salts are mixed, these reactions take place, resulting in the creation of insoluble salts that precipitate out of the solution.The precipitation reaction of the given reaction is
NaBr + Hg(NO₃)₂ ⇒ HgBr₂ + NaNO₃.
Learn more about precipitation reaction with the given link
https://brainly.com/question/24158764
#SPJ4
Compared with a mercury barometer, the column height for an alcohol barometer would be?
An alcohol barometer would have a higher column height when compared to a mercury barometer. If the Magdeburg hemispheres were 2 km above the sea, it would be simpler to separate them. Two pistons make up a hydraulic device, one with a tiny cross-section area and the other with a larger cross-section area.
Give An explanation of a mercury barometerBarometric pressure, commonly known as air pressure or atmospheric pressure, is measured by a device called a mercury barometer using the various physical properties of mercury contained in a tube. Barometers are helpful instruments for weather forecasting since they can be used to predict impending changes in the weather. For instance, when the barometric pressure falls, it may indicate the impending arrival of storms, rain, or wind. On the other side, a rise in atmospheric pressure could suggest that dry, fair weather may start to develop soon. There is no assurance that the weather will behave as predicted, despite the fact that barometer reading interpretation is a fairly precise science.
Learn more about mercury barometer here:-
https://brainly.com/question/16982367
#SPJ4
a compound contains only c, h, and n. combustion of 35.0 mg of the compound produces 53.0 mg co2 and 32.6 mg h2o. what is the empirical formula of the compound?
Consequently, the compound and empirical formula will be:
Methanediamine, CH₃N.
How to determine the mass of Carbon
Mass of CO₂ = 53 mg
Molar mass of CO₂ = 44 g/mol
Molar of C = 12 g/mol
Mass of C =?
Mass of C = (12 / 44) × 53
Mass of C = 14.45 mg
How to determine the mass of H
Mass of H₂O = 32.6 mg
Molar mass of H₂O = 18 g/mol
Molar of H = 2 × 1 = 2 g/mol
Mass of H =?
Mass of H = (2 / 18) × 32.6
Mass of H = 3.62 mg
How to determine the mass of N
Mass of compound = 35 mg
Mass of C = 14.45 mg
Mass of H = 3.62 mg
Mass of N =?
Mass of N = (mass of compound) – (mass of C + mass of H)
Mass of N = 35 – (14.45 + 3.62)
Mass of N = 16.93 mg
How to determine the empirical formula
C = 14.45 mg
H = 3.62 mg
N = 16.93 mg
Empirical formula =?
Divide by their molar mass
C = 14.45 / 12 = 1.204
H = 3.62 / 1 = 3.62
N = 16.93 / 14 = 1.209
Divide by the smallest
C = 1.204 / 1.204 = 1
H = 3.62 / 1.204 = 3
N = 1.209 / 1.204 = 1
Thus, the empirical formula of the compound is CH₃N
What is empirical formula?An empirical formula is a compound's chemical formula that only specifies the ratios of the elements it contains and not the precise number or arrangement of atoms. The element in the compound with the lowest whole number ratio would be this one.
An empirical formula is used to indicate the simplest whole-number ratio of the various atoms in a molecule.
The precise number of various atom types present in a compound's molecule is indicated by the molecular formula.
Empirical formulae are beneficial since figuring out the molecular formula can be immensely aided by knowing the relative amounts of each constituent in a molecule.
To learn more about empirical formula from the given link:
brainly.com/question/14044066
#SPJ4