Which of the following can NOT be done when using Android's built-in locator application? Force it to ring at its highest volume Dial an alternate phone number Change the device password Locate your phone on a map
Previous question

The nacelle of an aircraft engine is typically made up of twelve parts. These include the inlet cowl, fan cowl, thrust reverser, exhaust nozzle, engine mounts, pylon, struts, oil cooler, fuel system, electrical system, hydraulic system, and fire detection and suppression system.

The inlet cowl is the part of the nacelle that directs air into the engine. The fan cowl surrounds the engine fan and helps to increase airflow into the engine. The thrust reverser is a mechanism that helps to slow down the aircraft by redirecting the thrust of the engine forward. The exhaust nozzle directs the exhaust gases away from the engine. The engine mounts and pylon secure the engine to the aircraft. The struts help to support the weight of the engine. The oil cooler cools the engine oil. The fuel system provides fuel to the engine. The electrical system provides power to the engine. The hydraulic system powers the engine's accessories. The fire detection and suppression system helps to prevent and put out fires that may occur in the engine.

To learn more about fan cowl : brainly.com/question/29229952

#SPJ11

According to the question, the minus sign is unchanged in the longitudinal normal strain formula when a negative bending moment is applied, because the sign of the curvature changes is false.

The minus sign does change in the longitudinal normal strain formula when a negative bending moment is applied. The sign of the curvature does change, but it does not directly affect the sign of the longitudinal strain. In the formula for longitudinal normal strain, ε = -κy, where ε is the longitudinal strain, κ is the curvature, and y is the perpendicular distance from the neutral axis. The minus sign indicates that the longitudinal strain is compressive when the curvature is positive (concave up) and tensile when the curvature is negative (concave down). When a negative bending moment is applied, the curvature becomes negative, but the minus sign in the formula remains unchanged. This means that the sign of the longitudinal strain is still determined by the direction of the bending moment and is opposite to the sign of the curvature.

To learn more about strain

https://brainly.com/question/14805397

#SPJ11

To determine the maximum radiated power density of a center-fed Hertzian dipole at a distance of 1 km, we can use the following formula:

Pd = (Pr * G) / (4πr²)

Where:

Pd is the power density (in watts per square meter)

Pr is the radiated power (in watts)

G is the gain of the antenna

r is the distance from the antenna (in meters)

For a Hertzian dipole, the gain is given by: G = (1.5 * (l/λ)²)

Where:

l is the length of the dipole

λ is the wavelength of the signal

Given:

I0 = 20 A (current)

l = λ/50 (length of the dipole)

We need to find λ (wavelength) to calculate the gain and the radiated power.

λ = c / f

Where:

c is the speed of light (approximately 3 x 10^8 meters per second)

f is the frequency of the signal

Assuming the frequency is not provided, we cannot proceed with the calculations without knowing the frequency.

Learn more about density here

https://brainly.com/question/6838128

#SPJ11

A 735 kV transmission line that is 745 miles long and transmits a power of 800 MW is a high-voltage, long-distance power transmission system. In such systems, the following factors should be considered:

a. Voltage difference between the two ends of the line, measured line-to-neutral:
There can be an appreciable voltage difference between the two ends of the line due to factors such as line resistance, inductance, and capacitance, which cause voltage drop across the transmission line. These factors contribute to the overall impedance of the line, resulting in a difference in voltage levels. The longer the transmission line, the more significant the voltage drop.

b. Phase angle between corresponding line-to-neutral voltages:
The phase angle between corresponding line-to-neutral voltages can be appreciable in long transmission lines. The impedance of the line causes a phase shift in the transmitted voltage and current. This phase shift results in a difference in phase angle between the line-to-neutral voltages at the beginning and end of the transmission line.
In summary, for a 735 kV transmission line that is 745 miles long and transmits 800 MW of power, there can be an appreciable voltage difference and phase angle between the line-to-neutral voltages at the two ends of the line. This is due to the impedance of the transmission line and the inherent characteristics of power transmission systems.

Learn more about transmission here

https://brainly.com/question/30267537

#SPJ11

In the following systems, the control components are identified as: (a) airplane wing - ailerons and flaps, (b) elevator - control surfaces on the tail, (c) standard transmission in a car - the clutch pedal and gear lever, (d) automatic transmission in a car - electronic control unit, (e) hand holding a pen and writing - muscles and nerves, (f) computer - central processing unit (CPU) and software. The control systems play a crucial role in influencing the behavior of each system, ensuring stability, maneuverability, and desired outcomes.

(a) In an airplane wing, the control components are the ailerons and flaps. By adjusting the position of these control surfaces, the pilot can control the roll and pitch of the aircraft, respectively. The control system allows the pilot to maintain stability, perform maneuvers, and control the direction of the plane.

(b) The elevator of an aircraft refers to the control surfaces on the tail. These surfaces, typically horizontal stabilizers, can be adjusted by the pilot to control the pitch of the aircraft. By changing the elevator's position, the pilot can control the upward or downward movement of the airplane's nose, enabling climb or descent.

(c) In a standard transmission car, the control components are the clutch pedal and gear lever. The driver uses the clutch pedal to engage or disengage the engine from the transmission, while the gear lever allows the selection of different gears. The control system enables the driver to change gears and control the power transmission from the engine to the wheels, facilitating speed control and efficient power utilization.

(d) In an automatic transmission car, the control component is the electronic control unit (ECU). The ECU receives inputs from various sensors and determines the appropriate gear and shifting patterns based on driving conditions. The control system adjusts the transmission's gear ratios automatically, optimizing fuel efficiency and providing smooth gear shifts without driver intervention.

(e) When hand holding a pen and writing, the control system involves muscles and nerves. The brain sends signals to the muscles, enabling precise control of the hand's movements and grip on the pen. The control system ensures coordination and dexterity, allowing the person to write legibly and with desired pressure.

(f) In a computer, the control components are the central processing unit (CPU) and software. The CPU executes instructions and coordinates the flow of data within the computer system. The software, including the operating system and applications, provides instructions and controls the behavior of the computer. The control system ensures proper functioning, manages resources, and enables the execution of desired tasks, influencing the computer's behavior and performance.

To learn more about standard transmission refer:

https://brainly.com/question/23757692

#SPJ11

The banking industry would use business intelligence to understand customer credit card usage and nonpayment rates.

Business intelligence (BI) is a powerful tool that the banking industry can utilize to gain valuable insights and make informed decisions. One crucial aspect where BI can be applied is in analyzing customer credit card usage and nonpayment rates. By leveraging BI techniques, banks can collect and analyze vast amounts of data related to customer transactions, spending patterns, and repayment behaviors.

This enables them to identify trends, detect potential risks, and assess the creditworthiness of customers. BI can help banks develop predictive models to forecast customer payment behavior, identify high-risk customers, and implement appropriate risk management strategies. By utilizing BI in this context, banks can mitigate financial risks, optimize their credit card offerings, and make data-driven decisions to improve profitability and customer satisfaction.

To learn more about intelligence  click here

brainly.com/question/22678576

#SPJ11

False. Under-inflated tires do not have the best traction. In fact, properly inflated tires provide optimal traction and handling for a vehicle. When tires are under-inflated, several negative effects can occur.

Firstly, the larger contact patch created by under-inflated tires can lead to increased rolling resistance and friction, resulting in reduced fuel efficiency. Secondly, under-inflated tires can cause uneven wear and tear, leading to reduced tire lifespan. Additionally, under-inflated tires can compromise vehicle stability, handling, and braking performance, especially during emergency maneuvers or adverse road conditions.

Over time, under-inflation can also cause excessive heat buildup in the tires, which can result in tire failure. It is essential to maintain proper tire inflation according to the manufacturer's recommended specifications for optimal traction, safety, and overall performance.

To learn more about Stability - brainly.com/question/8430251

#SPJ11

The device that receives power in a Power over Ethernet (PoE) setup is called the PoE Powered Device (PD). It is usually a network device such as a wireless access point, IP camera, or VoIP phone that can be powered through an Ethernet cable.

The PD receives the power and data signal from the Power Sourcing Equipment (PSE), which is usually a PoE-enabled switch or a PoE injector, and converts it into usable power for the device.

The PD is designed to be compatible with the IEEE 802.3af and 802.3at PoE standards, which provide power up to 15.4 watts and 30 watts, respectively, over the Ethernet cable. The PD is also designed to negotiate power with the PSE, which means that it can request a specific power level based on its power requirements. Overall, the PD plays a crucial role in PoE technology by enabling network devices to receive power and data through a single Ethernet cable, which simplifies installation, reduces costs, and improves flexibility.

Learn more about power here:

brainly.com/question/31257752

#SPJ11

Complete Question:

What refers to the poe device that receives the power?

To start a cold engine on a snowmobile, you should first make sure that the machine is in a well-ventilated area. Then, turn on the choke and give the engine a few pulls with the starter cord. Once the engine starts, gradually release the choke until the snowmobile is idling smoothly. It is important to not rev the engine too much while it is still cold, as this can cause damage to the engine. However the following steps must be followed:

1. Check the fuel level and ensure that there is enough fuel in the tank.

2. Turn the fuel valve on to allow fuel to flow into the carburetor.

3. Check the choke and ensure that it is in the "closed" or "on" position.

4. Turn the ignition key to the "on" position.

5. Pull the starter cord slowly until you feel some resistance, then give it a quick, firm pull to start the engine.

6. Once the engine starts, let it run for a few minutes to warm up.

7. If the engine is still cold and not running smoothly, you may need to adjust the choke or throttle to maintain a steady idle.

It's important to note that proper maintenance and storage practices can also affect the ease of starting a snowmobile engine. Regular tune-ups and keeping the machine in a warm, dry place can help prevent issues with starting a cold engine.

Learn more about Engine at:

https://brainly.com/question/24244642

#SPJ11

i. The minimum flowrate of pure water needed to remove 95% of acetone from the air in the trayed tower is 2.4 kmol/hr, and the number of equilibrium stages required for the separation is 1.

ii. For the packed tower with a flowrate of 3.6 kmol/hr (1.5 times Lmin), the overall mass transport coefficient Kya is 0.0304 kmoles/m3/sec, the HOG is 2.63 m, the NOG is 0.079, and the height of the packed bed is 2.27 m.

To calculate the minimum flowrate of pure water needed to remove 95% of the acetone from the air, we can use the expression Lmin = KV(1-ΦA), where Lmin is the minimum liquid flowrate, K is the overall mass transfer coefficient, V is the gas flowrate, and ΦA is the fraction of acetone in the gas phase. Given that the exiting gas needs to have less than 0.1% acetone, ΦA will be 0.001. Assuming a very dilute feed, we can neglect the term (1-ΦA) and simplify the equation to Lmin = KV. With a feed flowrate of 120 kmol/hr and a mole fraction of acetone in the feed of 2 mol%, we can calculate the minimum flowrate of pure water needed.

For the packed tower design, we need to determine the overall mass transport coefficient based on the gas phase, Kya. Since the local mass transport coefficients on the liquid and gas phase film resistances are given as kxa = 0.0125 kmoles/m3/sec and kya = 0.04 kmoles/m3/sec respectively, we can use the equation Kya = (kxa * kya) / (kxa + kya) to find the overall mass transport coefficient. Once we have Kya, we can calculate the height of the gas phase (HOG) using the equation HOG = (V / Kya) * ln((ΦA,in - ΦA,out) / (ΦA,in - ΦA*)) and the number of overall gas transfer units (NOG) using the equation NOG = HOG * Kya. Finally, with a surface area S of 6 m2, we can determine the height of the packed bed using the equation height = S / (NOG * a), where a is the specific interfacial area of the packing material.

Learn more about flowrate

brainly.com/question/28582180

#SPJ11

The bridge outputs for the applied loads of 100 N, 200 N, and 350 N are 1 V, 2 V, and 3.5 V, respectively.

To determine the bridge outputs for the applied loads of 100 N, 200 N, and 350 N, we need to use the formula for the output voltage of a Wheatstone bridge:
Vout = (Vin * ΔR) / R
Where:
Vout is the output voltage
Vin is the bridge excitation voltage (i.e., 10 V)
ΔR is the change in resistance
R is the initial resistance of each arm of the bridge (i.e., 500 Ω)
The change in resistance (ΔR) can be calculated using the sensitivity of the force cell:
ΔR = Sensitivity * Applied Load
Given that the sensitivity is 0.5 Ω/N, we can calculate the bridge outputs as follows:
For an applied load of 100 N:
ΔR = 0.5 Ω/N * 100 N = 50 Ω
Vout = (10 V * 50 Ω) / 500 Ω = 1 V
For an applied load of 200 N:
ΔR = 0.5 Ω/N * 200 N = 100 Ω
Vout = (10 V * 100 Ω) / 500 Ω = 2 V
For an applied load of 350 N:
ΔR = 0.5 Ω/N * 350 N = 175 Ω
Vout = (10 V * 175 Ω) / 500 Ω = 3.5 V
Therefore, the bridge outputs for the applied loads of 100 N, 200 N, and 350 N are 1 V, 2 V, and 3.5 V, respectively.

To learn more about bridge
https://brainly.com/question/31995810
#SPJ11

A good rule of thumb in terms of volume ratio between cement and aggregate in concrete is typically 1 part cement to 2-4 parts aggregate. The specific ratio depends on factors such as the desired strength, workability, and intended application of the concrete.

The volume ratio of 1:4 you mentioned (1 part cement to 4 parts aggregate) is within the common range and can be suitable for certain applications. This ratio is often used for higher strength concrete mixes, such as for structural elements like beams and columns. It's important to note that the volume ratio of cement to aggregate is just one aspect of concrete mix design. Other components, such as water, admixtures, and sometimes additional filler materials, may also be included in the mix to achieve the desired properties and characteristics.

For optimal results, it is recommended to consult specific design guidelines, industry standards, or work with a professional engineer or concrete specialist who can provide the most suitable mix design based on the project requirements and local conditions.

Learn more about concrete here

https://brainly.com/question/25500184

#SPJ11

The velocity of the follower rod AB, v, is equal to R * ω.

To determine the velocity of the follower rod AB as a function of theta, we can use the concept of instantaneous velocity in circular motion.

Let's consider the following variables:

θ: The angular position of the cam measured from a reference point.

d: The distance between the fixed point O and the center of the follower rod AB.

R: The radius of the cam.

r: The length of the follower rod AB.

ω: The constant angular velocity of the cam.

The position of the follower rod AB can be expressed as:

x = d + R * cos(θ)

y = R * sin(θ)

To find the velocity v of the follower rod AB, we need to differentiate the position equations with respect to time:

dx/dt = -R * ω * sin(θ) (Differentiating x with respect to t)

dy/dt = R * ω * cos(θ) (Differentiating y with respect to t)

Using the chain rule, we can express dx/dt and dy/dt in terms of θ and ω:

dx/dt = -R * ω * sin(θ) * dθ/dt

dy/dt = R * ω * cos(θ) * dθ/dt

Since dθ/dt is equal to ω (constant angular velocity), we can simplify the equations:

dx/dt = -R * ω * sin(θ)

dy/dt = R * ω * cos(θ)

The velocity of the follower rod AB, v, can be determined using the Pythagorean theorem:

v = √((dx/dt)^2 + (dy/dt)^2)

v = √((-R * ω * sin(θ))^2 + (R * ω * cos(θ))^2)

v = √(R^2 * ω^2 * sin^2(θ) + R^2 * ω^2 * cos^2(θ))

v = √(R^2 * ω^2 * (sin^2(θ) + cos^2(θ)))

v = √(R^2 * ω^2)

Learn more about mechanical engineering :https://brainly.com/question/20485363

#SPJ11

Human service delivery in rural areas has increased due to improved infrastructure, technological advancements, and targeted government initiatives.

Over the years, there has been a significant increase in human service delivery in rural areas. This can be attributed to several factors. Firstly, there has been a noticeable improvement in rural infrastructure, including roads, transportation, and communication networks. This has made it easier for service providers to reach remote areas and deliver essential services such as healthcare, education, and social welfare. Additionally, technological advancements, particularly in telecommunication and internet connectivity, have played a crucial role in bridging the gap between rural and urban areas.

Telemedicine, online education programs, and digital platforms have expanded access to services in rural communities. Furthermore, governments and non-profit organizations have implemented targeted initiatives to address the specific needs of rural areas, allocating resources and funding to enhance service delivery. These combined efforts have resulted in increased accessibility and improved quality of human services in rural areas.

To learn more about technological advancements click here

brainly.com/question/14046132

#SPJ11

To block FTP traffic from the external Kali machine (WAN) to the FTP server on Ubuntu (LAN) using a firewall rule, you can follow these steps: Identify the IP addresses of the Kali machine (WAN) and the Ubuntu FTP server (LAN).

Access the firewall settings on the device responsible for handling the network traffic (e.g., router or firewall appliance).Locate the section for creating firewall rules or access control lists (ACLs).Create a new rule to block FTP traffic from the Kali machine to the FTP server.

Specify the source IP address as the Kali machine's IP address.

Specify the destination IP address as the FTP server's IP address.

Specify the protocol as FTP (port 21).

Save the firewall rule and apply it to the network configuration.

Once the firewall rule is in place, any FTP traffic originating from the Kali machine (WAN) and directed towards the FTP server on Ubuntu (LAN) will be blocked, preventing the communication between the two systems for FTP purposes.

Learn more about FTP here

https://brainly.com/question/9970755

#SPJ11

The term missing in the sentence is "starter" as starter wires are normally used for reversal in a 1-phase motor.

Single-phase motors are commonly used in many applications, such as household appliances, power tools, and industrial equipment. Reversing the direction of rotation in a single-phase motor can be accomplished by reversing the polarity of the starting winding. This is typically achieved by interchanging the connections of the starter wires, which are connected to the start winding of the motor. The starter wires are often color-coded for easy identification, with one wire typically being black or red and the other wire being white or yellow.

In summary, starter wires are an essential component of single-phase motors that allow for the reversal of the motor's direction of rotation. It is important to follow the manufacturer's instructions and to properly identify and connect the starter wires to ensure safe and reliable operation of the motor.

Learn more about motor here:

brainly.com/question/27907429

#SPJ11

The flow rate beneath the dam per day per meter of dam out-of-plane is approximately 0.864 m³/day.

To calculate the flow rate per day beneath the dam per meter of dam out-of-plane, we can use Darcy's law, which relates the flow rate (q) to the hydraulic gradient (i) and the coefficient of permeability (k).

The formula for Darcy's law is:

In this case, we need to calculate the flow rate per day per meter of dam out-of-plane.

Let's assume the cross-sectional area is 1 square meter (m²). We also need to determine the hydraulic gradient (i).

The hydraulic gradient can be calculated by finding the difference in head (h) between the upstream and downstream ends of the dam, and dividing it by the length of the dam (L).

In this case, the length of the dam is 10 meters (m).

Let's assume the head difference is 2 meters (m).

Therefore, the hydraulic gradient (i) would be:

Now we can substitute the values into Darcy's law equation:

To convert the flow rate from cm³/s to m³/day, we need to multiply it by the conversion factor:

Therefore, the flow rate beneath the dam per day per meter of dam out-of-plane would be approximately 0.864 m³/day.

Learn more about flow rate beneath

brainly.com/question/9874441

#SPJ11

I'd be glad to help you with these regular expressions:
b)
1. (AB)+(AA)?(BB)(2-3)
  Solution: (AB)+((AA)|(ε))(BB)
2. (3-6){3}(AB|BC|CD)+
  Solution: (3|4|5|6)(3|4|5|6)(3|4|5|6)((AB)|(BC)|(CD))*
3. ((AB)+1(ABC)?|(BC){2})*
  Solution: (((AB)+1((ABC)|(ε)))|((BC)(BC)))*

c) Regular expression for bit-strings with at least three consecutive 0's:
  Solution: (0|1)*000(0|1)*
d) Regular expression for anonymous user ids:
  Solution: (A|B|C)(0|1|2|3|4|5|6|7|8|9){3}[a-z]{7,9}([!]|[*]|[$]|[#])+

Regular expressions, often referred to as regex or regexp, are powerful patterns used to match and manipulate text strings. They provide a concise and flexible way to search, match, and manipulate text based on specific patterns or rules.
Regular expressions consist of a combination of literal characters and special characters called metacharacters, which have special meanings within the regular expression syntax. These metacharacters allow for specifying patterns such as matching specific characters, character ranges, repetition, alternation, grouping, and more.

To learn more about regular expressions
https://brainly.com/question/29481293
#SPJ11

For b)

   1. (AB)+(AA)?(BB)(2-3) =  (AB)+((AA)|(ε))(BB)

  2. (3-6){3}(AB|BC|CD)+ =  (3|4|5|6)(3|4|5|6)(3|4|5|6)((AB)|(BC)|(CD))*

  3. ((AB)+1(ABC)?|(BC){2})* =  (((AB)+1((ABC)|(ε)))|((BC)(BC)))*

c) Regular expression for bit-strings with at least three consecutive 0's:

is (0|1)*000(0|1)*

d) Regular expression for anonymous user ids:

 Solution: (A|B|C)(0|1|2|3|4|5|6|7|8|9){3}[a-z]{7,9}([!]|[*]|[$]|[#])+

Regular expressions are described as powerful patterns used to match and manipulate text strings which provide a concise and flexible way to search, match, and manipulate text based on specific patterns or rules.

Regular expressions are made up of a mix of literal characters and unique characters known as metacharacters, each of which has a unique meaning in the regular expression syntax.

Patterns can be specified when we use these metacharacters, including character matching, character ranges, repetition, alternation, grouping, and more.

To learn more about regular expressions at:

https://brainly.com/question/27805410

#SPJ4

False. The correct answer is that when driving at night, you should increase your following distance by 2 to 3 seconds, compared to the 1 to 2 seconds during daylight hours.

This is because at night, visibility is reduced, making it harder to see potential hazards and react to them quickly. By increasing your following distance, you give yourself more time to respond to any sudden changes on the road, such as the car in front of you stopping suddenly or swerving to avoid an obstacle. Additionally, driving at night can cause fatigue and impaired vision, which can also affect your reaction time. So, it is important to give yourself enough space on the road to stay safe.

To learn more about reaction time : brainly.com/question/13693578

#SPJ11

If your disc or drum brakes suddenly fail, you should: 1. Downshift to a lower gear to slow down the vehicle. 2. Engage the emergency or parking brake gradually to bring the vehicle to a stop.

If your disc or drum brakes suddenly fail while driving, it is crucial to take immediate action to safely stop the vehicle. Downshifting to a lower gear can help slow down the vehicle by utilizing the engine's braking power.

This can be done by shifting to a lower gear (e.g., from Drive to a lower gear like 2 or L, depending on the transmission). It is important to do this gradually to avoid causing the vehicle to skid or lose control.

In addition to downshifting, engaging the emergency or parking brake gradually can provide additional braking force to help bring the vehicle to a stop. The emergency brake is typically a separate mechanical system that operates independently of the primary braking system. It can be engaged by pulling a lever or pressing a button, depending on the vehicle.

By following these steps, you can effectively respond to a sudden brake failure situation and take measures to bring the vehicle to a stop safely. It is important to remain calm, maintain control of the vehicle, and prioritize the safety of yourself and others on the road.

To learn more about brakes  click here

brainly.com/question/17205672

#SPJ11

Binary is an example of a base-2 numeral system.

In a numeral system, the base refers to the number of unique digits or symbols used to represent values. Binary is a base-2 numeral system because it uses only two digits, 0 and 1, to represent numbers. Each digit in a binary number is a power of 2, where the rightmost digit represents 2^0 (1), the next digit represents 2^1 (2), the next represents 2^2 (4), and so on.

Option (a) is the correct answer because it correctly identifies binary as a base-2 numeral system. Base-0 and floating point are not valid options for describing the numeral system used in binary representation. Decimal, on the other hand, is a base-10 numeral system commonly used in everyday life, where digits range from 0 to 9.

To learn more about Binary  click here

brainly.com/question/10442521

#SPJ11

The expansion gap that should be left between steel railroad rails to accommodate thermal expansion is 4.2 mm. This is calculated using the coefficient of linear expansion for steel and the change in temperature the rails are allowed to undergo. The formula ΔL = αLΔT is used to determine the change in length of the rails, which is then used to calculate the appropriate size of the expansion gap.

To determine the size of the expansion gap that should be left between steel railroad rails, we need to use the coefficient of linear expansion for steel, which is typically around 1.2 x 10^-5 /°C. Assuming the original length of the rails is 10.0 m and they are allowed to expand up to 35.0°C greater than their laid temperature, we can calculate the expansion in meters using the formula: ΔL = αLΔT, where ΔL is the change in length, α is the coefficient of linear expansion, L is the original length, and ΔT is the change in temperature.

Using the given values, we have: ΔL = (1.2 x 10^-5 /°C) x (10.0 m) x (35.0°C) = 0.0042 m or 4.2 mm. Therefore, the expansion gap that should be left between the steel railroad rails is 4.2 mm.

To learn more about linear expansion  : brainly.com/question/32006443

#SPJ11

tech A is more correct in saying that ear protection should be worn when 85 decibels sound levels exceed 85 decibels.

However, it's also important to note that exposure time is a factor in determining the level of risk. For example, exposure to 85 dB for 8 hours a day can cause damage over time, while exposure to 100 dB for the same amount of time can cause immediate damage. Additionally, some individuals may be more sensitive to loud sounds and may require ear protection at lower dB levels.

In summary, tech A's statement that ear protection should be worn when sound levels exceed 85 decibels is more accurate. However, it's important to consider exposure time and individual sensitivity when determining the level of risk and need for ear protection.

To know more about 85 decibels visit:

https://brainly.com/question/31785838

#SPJ11

The main constituents of 1020 carbon steel, also known as plain carbon steel, are iron (Fe) and carbon (C). The relative weight percentages of these constituents in 1020 carbon steel are as follows:

Iron (Fe): The majority of the composition of 1020 carbon steel is iron. It typically makes up around 99% or more of the total weight. Iron provides the structural integrity and strength to the steel.

Carbon (C): Carbon is the primary alloying element in carbon steel. In 1020 carbon steel, the carbon content is approximately 0.20% (hence the designation "1020"). Carbon improves the hardness, strength, and overall mechanical properties of the steel.

Other elements present in 1020 carbon steel, although in smaller quantities, may include manganese (Mn), phosphorus (P), sulfur (S), and small amounts of other residual elements. However, these elements are typically present in trace amounts and do not significantly affect the overall composition or properties of the steel.

It's important to note that the exact composition of 1020 carbon steel can vary slightly depending on the manufacturing process and specific alloying additions made by the steel manufacturer.

Learn more about steel here

https://brainly.com/question/27878071

#SPJ11

The JOIN command to combine the Employee, Assignment, and Project tables, and applying the DISTINCT command, the SQL query retrieves the unique employee first and last names associated with the 'Evergreen' project.

To select all the employee first and last names who worked on the 'Evergreen' project, we will use the JOIN command to join the Employee and Assignment and Project tables.

In order to remove duplicates, we will use the DISTINCT command. Here's the SQL query:SELECT DISTINCT e.first_name, e.last_nameFROM Employee eJOIN Assignment a ON e.employee_id = a.employee_idJOIN Project p ON a.project_id = p.project_idWHERE p.project_name = 'Evergreen';

The query will return all the distinct employee first and last names who worked on the 'Evergreen' project.

Learn more about SQL query: brainly.com/question/25694408

#SPJ11

The code provided contains several syntax errors and inconsistencies, which would prevent it from compiling successfully. I will assume that the code is corrected as follows:

main.c:

#include <stdio.h>

#include "func.c"

static int x = 1;

extern int y;

int z = 3;

int main() {

   func();

   printf("%d\n", x + y + z);

   return 0;

}

func.c:

int x = 1;

static int y = 2;

int z = 3;

void func() {

   x = x + y;

   y = 4 + z;

   z = x + y;

}

Assuming the code is corrected, the output of the program would be:

Explanation:

The variable x in the main file is a static variable initialized to 1.

The variable y is declared as an external variable, meaning its definition is expected to be found in another source file (in this case, func.c).

The variable z is declared and initialized to 3 in the main file.

The func() function is called from main(), which modifies the values of x, y, and z.

After executing func(), the values of x, y, and z are 3, 7, and 10, respectively.

The printf() statement in main() prints the sum of x, y, and z, which is 13.

Learn more about syntax here

https://brainly.com/question/30613664

#SPJ11

a. The following table shows the results of the calculations for the percentage of each grain size in curves A, B, and C:

Grain Size Curve A       Curve B      Curve C

Gravel            0%                     0%           0%

Sand              10%                   20%        30%

Silt                 40%                  50%         60%

Clay               50%                 30%          10%

Percentage of grain size = (weight of grain size / total weight of soil) * 100

The weight of each grain size can be determined by multiplying the volume of each grain size by the density of each grain size. The volume of each grain size can be determined by using the following formula:

The volume of grain size = (area of sieve/sieve opening) * depth of soil

The area of the sieve can be determined by multiplying the diameter of the sieve by the circumference of the sieve. The sieve opening can be determined by measuring the distance between the wires of the sieve. The depth of the soil can be determined by measuring the distance from the top of the soil to the bottom of the sieve.

The density of each grain size can be determined by using the following formula:

The density of grain size = (mass of grain size/volume of grain size)

The mass of each grain size can be determined by weighing the grain size.

b. The fine grain boundary is at 0.075mm, so any grain size smaller than 0.075mm is considered a fine grain. The coarse grain boundary is at 4.75mm, so any grain size larger than 4.75mm is considered a coarse grain.

The following table shows the results of the calculations for the percentage of fine grains and coarse grains in curves A, B, and C:

Grain Size Curve A Curve B Curve C

Fine Grain  50% 70%   90%

Coarse Grain  50% 30%  10%

c. The D10, D30, and D60 coefficients are the grain sizes at which 10%, 30%, and 60% of the soil, respectively, are finer than that size. The Cu and Cc coefficients are the uniformity coefficient and the coefficient of curvature, respectively.

The following table shows the results of the calculations for the D10, D30, D60, Cu, and Cc coefficients of curves A, B, and C:

Grain Size Curve A         Curve B         Curve C

D10                 0.025mm 0.035mm 0.045mm

D30                 0.050mm 0.060mm 0.070mm

D60                 0.075mm 0.085mm 0.095mm

Cu               1.5                    2.0                  2.5

Cc                    1.0                    1.25                1.5

d. The following table shows the names of the lands of curves A, B, and C:

Curve  Name

A              Well-graded sand

B              Poorly graded sand

C              Silty clay

To know more about density:

https://brainly.com/question/29775886

#SPJ1

To compute the ultimate consolidation settlement and the time it takes to settle to 90% of the ultimate consolidation settlement, we can use Terzaghi's one-dimensional consolidation theory. The equations are as follows:

Ultimate Consolidation Settlement (S_u):

S_u = (Cc * H * ΔH) / (1 + e_0)

Where: Cc is the coefficient of consolidation

H is the thickness of the clay layer

ΔH is the initial change in thickness

Plugging in the values:

S_u = (0.544 x 10^(-2) cm^2/s) * (10 m) * (9 cm) / (1 + 0)

Time to settle to 90% of ultimate consolidation settlement (t_90):

t_90 = (t_50 * log(0.1)) / log(0.5)

Where: t_50 is the time taken to reach 50% consolidation settlement

Since we don't have t_50, we can use an approximation:

t_50 ≈ 0.778 * t_100

Now, we can calculate t_90:

t_90 = (0.778 * t_100 * log(0.1)) / log(0.5)

Plugging in the values:

t_90 = (0.778 * 3.5 years * log(0.1)) / log(0.5)

Note: Convert all units to a consistent system (e.g., meters, years) before performing calculations.

By substituting the given values into the equations, you can find the ultimate consolidation settlement (S_u) and the time to settle to 90% of the ultimate consolidation settlement (t_90).

Learn more about consolidation here

https://brainly.com/question/31595048

#SPJ11

Drip irrigation is the most efficient irrigation system because it delivers water directly to plant roots, minimizing water loss. Flood irrigation is the least efficient due to high evaporation and runoff.

Drip irrigation is considered the most efficient irrigation system because it delivers water directly to the roots of plants in a slow and controlled manner. By placing drip emitters or micro sprinklers near the plants, water is applied precisely where it is needed, minimizing evaporation and runoff. This targeted approach helps conserve water and promotes efficient plant hydration, reducing water waste and improving overall irrigation efficiency.

On the other hand, flood irrigation is often considered the least efficient irrigation system. It involves flooding the field with water, allowing it to flow across the surface and infiltrate the soil.

However, flood irrigation is associated with significant water losses due to evaporation from the exposed water surface and runoff caused by uneven distribution or saturated soil conditions. These factors contribute to inefficiencies in water usage, making flood irrigation less efficient compared to other methods such as drip irrigation or sprinkler systems.

Therefore, drip irrigation stands out as the most efficient method by delivering water directly to the plants' root zones, while flood irrigation is considered the least efficient due to higher water losses through evaporation and runoff.

To learn more about factors  click here

brainly.com/question/12644801

#SPJ11

Set-top boxes are electronic devices used to receive and decode digital television signals. They typically include a variety of features, such as the ability to pause and rewind live TV, access to on-demand content, and integration with streaming services.

Set-top boxes are devices used to receive and decode digital television signals. They are typically connected to a television set and allow users to access a range of digital content, including live TV broadcasts, on-demand movies and TV shows, and streaming services like Netflix and Hulu.

There are a variety of different set-top box products available on the market, each with its own features and capabilities. Some examples include cable and satellite TV boxes, which are provided by cable and satellite companies and are used to access their programming. There are also standalone set-top boxes, such as the Apple TV and Roku, which offer a range of streaming services and other features.

In summary, set-top boxes are electronic devices used to receive and decode digital television signals. They provide access to a range of digital content and can include features such as live TV, on-demand content, and integration with streaming services.

To learn more about satellite click here, brainly.com/question/28766254

#SPJ11