A. Log out of website session, B. Lock desktop screen and D. Leave laptop logged in and unattended. These are all bad security habits that should be avoided as they can leave company systems open to unauthorized access and potential data breaches.
What is company systems?Company systems are the processes, policies, and procedures that businesses use to operate efficiently and effectively. These systems help to ensure that a company meets its goals and objectives, while remaining within the boundaries of applicable regulations. Company systems may include management structure, communication plans, data management, customer service protocols, financial management, and more. Company systems are designed to ensure that operations are efficient and strategic decisions are made in a timely manner. Properly designed and implemented systems provide the foundation for a successful business and can help to ensure long-term growth.
To learn more about company systems
https://brainly.com/question/16891252
#SPJ4
The areas of the cortex used by expert video game players are most likely to do what, compared to the same cortical areas of those who do not play video games?
A. Have faster action potentials
B. Have smaller, but a greater number of neurons
C. Be thicker
D. Be more resistant to transcortical stimulation
The option C. Be thicker is right. Studies have found that the cortical regions of the brain used by expert video game players are thicker than those of non-gamers.
Research has shown that certain areas of the brain, such as the striatum and the prefrontal cortex, are activated during video game play and are associated with tasks such as spatial navigation, attention, and decision-making. Studies have also found that the cortical regions of the brain used by expert video game players are thicker than those of non-gamers. This suggests that playing video games can lead to structural changes in the brain, specifically an increase in gray matter volume in certain regions. This is likely due to the brain's ability to adapt and change in response to environmental demands, a process known as neuroplasticity. It is important to note that this research is still in its early stages and more research is needed to fully understand the effects of video game play on the brain.
Learn more about the cortex : https://brainly.com/question/12993641
#SPJ4
an question blank 1 of 1 type your answer... has the monitor and case built together and uses components that are common to both a notebook and a desktop computer.
A notebook and a desktop computer's components are used in an all-in-one computer, which has the monitor and chassis incorporated into one unit. Typically, it is slim in appearance and simple to assemble and use.
An all-in-one computer is a style of computer that incorporates components found in both notebook and desktop computers and has the monitor and chassis incorporated into one unit. The monitor, CPU, memory, storage, and other components are all integrated into a single small unit as opposed to having separate parts that must be linked. Since they don't need a separate display or tower, all-in-one computers are frequently utilized in small offices or houses or other places with limited space. In comparison to conventional desktop computers, they frequently use less energy and are simpler to upgrade.
To know more about desktop computers
brainly.com/question/29887842
#SPJ4
gives viewers a visual image of data, such as a line graph or a three-dimensional bar graph, instead of just numbers listed in a table.
In Microsoft PowerPoint, a chart gives viewers a visual image of data, such as a line graph or a three- dimensional bar graph, instead of just numbers listed in a table.
What is chart?A chart in Microsoft PowerPoint is a graphical representation of data that allows viewers to quickly and easily understand trends, patterns, and comparisons in the data. There are several different types of charts that can be used in PowerPoint, such as:
Line graph: Shows how data changes over timeBar graph: Compares data across different categoriesPie chart: Shows the proportion of different data points in relation to the wholeInstead of just listing data in a table, a chart provides a visual image that can make it easier for viewers to understand and remember the information. It also allows for quick comparison between different data points.
Learn more about chart from
https://brainly.com/question/29539156
#SPJ1
See full question below
In Microsoft PowerPoint, a ------- gives viewers a visual image of data, such as a line graph or a three- dimensional bar graph, instead of just numbers listed in a table.
Which of the following are the phases in Open Source Intelligence (OSINT)? Choose all that apply A. Result Delivery B. Source Identification C. Data Harvesting D. Data Processing E. Data Analysis
The OSINT cycle is composed of five steps: planning, gathering, analyzing, disseminating, and feedback.
By ingesting video, image, audio, and text data from public domain data sources, OSINT is accomplished. The ingested data is then analyzed to produce insights from all of the data sources. Social media, news stories, government reports, and public documents are just a few of the sources that OSINT consults. Other methods of intelligence collecting, however, might concentrate on a certain source category. The six steps of the intelligence cycle—requirements, planning and direction, collecting, processing and exploitation, analysis and production, and dissemination—represent active collaboration. The cycle has a circular shape, and the transitions between the steps are seamless.
Learn more about media here-
https://brainly.com/question/14114305
#SPJ4
You are performing a network risk assessment to develop your disaster recovery plan. Which of these are examples of detection measures? Check all that apply.
A. using alert system for outages
B. monitoring system testing
C. testing your own and users knowledge and readiness for disasters
The correct option are-
A. using alert system for outagesB. monitoring system testingC. testing your own and users knowledge and readiness for disastersExplain the term network risk assessment?The network risk assessment is among the best things you should do for your staff, regardless of how big or small your company is, to assure control of your networks and data and lower the danger of cyberattacks, which might bring your company to its knees.
A network risk assessment evaluates the networks that your company and its employees utilise on a daily basis. Utilizing methods for risk assessment, the evaluation aids in determining the dangers to your sensitive data and important systems.Once these dangers are understood and recognised, you can start to arrange your data according to the significance of the corresponding risk.To create your disaster recovery plan, you are analysing the network risk.
Examples of detecting methods include:
A. using an outage alert systemB. tracking system testing C. evaluating your knowledge of disaster preparedness and that of your usersTo know more about the network risk assessment, here
https://brainly.com/question/13063048
#SPJ4
You are designing an application that will store data in Azure Storage.
You need to recommend a solution to ensure that data in the storage account is encrypted by using customer-managed keys.
What should you include in the recommendation?
Select only one answer.
Azure Key Vault
Azure Private Link
Shared access signature
Service endpoint
Where the above storage scenario exists, what you should include int he recommendation is the implementation of and Azure Key Vault (Option A)
What is the rationale for the above response?Azure Key Vault is a service that allows for the centralized storing of sensitive data such as keys and secrets that may be used to encrypt data in Azure Storage.
With Azure Key Vault, you may encrypt data in Azure Storage using customer-managed keys (commonly known as "bring your own key" or BYOK).
This allows you to keep control of the keys used to encrypt your data while still meeting regulatory obligations. Azure Private Link gives you access to Azure PaaS Services (Azure storage, Azure SQL, Azure Event Hubs, and so on) through a private endpoint on your virtual network. This may be used to add an extra layer of security.
Learn more about Azure:
https://brainly.com/question/30260642
#SPJ1
in ieee terminology, a group of stations that share an access point are said to be part of which of ?
The correct answer is basic service set. 802.11 frames come in three varieties: management, control, and data. Data frames carry payloads that are the information from layers.
One of the management frames in IEEE 802.11-based WLANs is the beacon frame. It includes all of the network's information. Periodically broadcast beacon frames are used to synchronise the service set's members and indicate the existence of a wireless LAN. The MAC frame format has four address fields. These parameters are used to specify the source address (SA), destination address (DA), transmitting STA address (TA), and receiving STA address in addition to the basic service set identifier (BSSID) (RA). 03-Dec-2014
To learn more about basic service set click the link below:
brainly.com/question/23899870
#SPJ4
Today, most appliances and electronic devices contain microchips. What is
their function in these objects?
OA. Microchips work as power supplies.
B. Microchips hold various parts together.
C. Microchips work as mechanical systems.
D. Microchips work as central processing units.
Today, most appliances and electronic devices contain microchips. The
function in these objects is option D. Microchips work as central processing units.
What are microchips?A microchip, also known as an integrated circuit, is a small piece of semiconductor material, usually no more than a square centimeter in size, that contains a integrated circuit (IC).
An IC is an electronic circuit consisting of active and passive electronic components (transistors, diodes, resistors, capacitors, etc.) that are connected to perform a specific function.
Therefore, microchips act as the central processing unit (CPU) of the device, controlling and coordinating the activities and sharing of resources of other parts of the device, such as memory, input/output interfaces, and other peripheral devices.
Learn more about microchips from
https://brainly.com/question/22738250
#SPJ1
write a system of linear equations determining the coefficients w0, w1 of the line passing through the points in our dataset d and analytically solve for w0, w1 by solving this system of linear equations (i.e., using substitution). please show your work.
The linear equations w0 + w1*x = y determine the coefficients w0, w1 of the line cutting the points in our dataset, d. The equations 3 = w0 + 7w1 and 7 = w0 + 2w1 are obtained by substituting the coordinates of the two points, (7,3) and (2,7). The results of simultaneously solving these equations are w0 = -5 and w1 = 2.
A group of two or more linear equations with the same set of variables is referred to as a system of linear equations. The ordered pair that satisfies all of the equations in a system of linear equations is the system's solution. The linear equations w0 + w1*x = y determine the coefficients w0, w1 of the line running through the points (7,3) and (2,7) in our dataset d. The two points' coordinates can be substituted into this equation to solve it simultaneously with other equations. This results in the solution, which are the line's coefficients, w0 = -5 and w1 = 2.
To know more about Linear Equations Please click on the given link:
https://brainly.com/question/11897796
#SPJ4
fill in the blank: a data analyst is working with a spreadsheet that has very long text strings. they use the len function to count the number of in the text strings.
A spreadsheet containing exceedingly lengthy text strings is being used by a data analyst. They count how many characters are present in the text strings using the "=LEN(G11)" function.
Explain the strings function?The category of Excel functions known as "String Functions" enables you to alter text blocks in numerous ways.
But first, let's define the term "string" before we explore what string functions mean and how they work.Although there are many helpful string functions, all of them require strings as one or so more arguments to achieve a range of objectives.String functions allow you to:
Create a longer string by joining two smaller strings together.Put a string's crucial information in a different cell.Distinguishing strings using a common delimiterReduce a string such that just its most crucial elements are sent to another function.Thus, a spreadsheet containing exceedingly lengthy text strings is being used by a data analyst. They count how many characters are present in the text strings using the "=LEN(G11)" function.
To know more about the text strings, here
https://brainly.com/question/15683939
#SPJ4
You are working with a database table that contains employee data. The table includes columns about employee location such as city, state, country, and postal_code. You want to retrieve the first 3 characters of each postal code. You decide to use the SUBSTR function to retrieve the first 3 characters of each postal code, and use the AS command to store the result in a new column called new_postal_code.
You write the SQL query below. Add a statement to your SQL query that will retrieve the first 3 characters of each postal code and store the result in a new column as new_postal_code.
NOTE: The three dots (...) indicate where to add the statement.
SELECT
employee_id,
...
FROM
employee
ORDER BY
postal_code
What employee ID number appears in row 5 of your query result?
1 point
7
3
1
8
According to the question of SQL query, 7 employee ID number appears in row 5 of your query result.
What is SQL query?
SQL (Structured Query Language) is a programming language designed to manage data stored in relational databases. SQL queries are used to retrieve, insert, delete, and update data in a database. They can be used to select specific data, join multiple tables, aggregate data, and perform other operations. SQL queries are the backbone of any relational database, and are used to provide access to the data stored within it. SQL queries are written in a specific syntax and can be used to perform a variety of tasks, such as creating and modifying tables, inserting data, deleting data, and setting up user permissions.
To learn more about SQL query
https://brainly.com/question/25694408
#SPJ4
multiple choice question securities are debt securities a company intends and is able to hold until maturity. they are reported in current assets or long-term assets, depending on their maturity date. multiple choice question. influential investments available-for-sale held-to-maturity
'Influential investments: Held-to-Maturity'. Held-to-maturity investments are financial instruments that an investor agrees to hold until they mature.
What do you mean by Investment in Debt Securities?
Investment in debt securities refers to the purchase of bonds, debentures, and other debt instruments issued by governments and companies as a way to generate income and capital gains. These investments typically offer higher yields than cash and money market instruments, but they also come with different levels of risk.
Held-to-maturity securities are debt securities that a company intends to hold until they mature.These investments are usually reported as long-term assets on the balance sheet, since they are not expected to be converted into cash within the next twelve months.Held-to-maturity investments are not as liquid as other investments such as available-for-sale securities, which can be bought and sold on the open market.Held-to-maturity investments offer more stability, since they are held until their maturity date and the interest payments are known in advance.This type of investment is usually used by investors who are looking for a steady stream of income and are not interested in taking on any additional risk.This type of investment is called an "Investment in Debt Securities".
To learn more about Investment refer to:
https://brainly.com/question/30489047
#SPJ4
What's wrong with the following function definition? def average(x, y, z): return (x y z)/3
print( The answer has been returned
To put it simply, a function is just a "chunk" of code that you can reuse rather than having to write it out repeatedly. Using functions, programmers can divide an issue into smaller.
What are the functions of computer programming?One of the most crucial ideas is the concept of a function. Implementing mathematical operations with functions is a popular practise in computer languages. One or more results are being computed by such a function, and each one is totally dependent on the parameters that were supplied to it.
We are discussing Python and programming even though this is mathematics. So, in programming, In the broadest sense, a function is a structuring component used in programming languages to arrange a collection of statements so they can be used repeatedly in a programme. Without functions, the only way to do this would be to copy existing code, adapt it to new situations, and reuse it—neither of which is a good idea.
To learn more about function refer to :
https://brainly.com/question/179886
#SPJ4
while at 18 metres/60 feet, my computer says i have 40 minutes no stop time remaining. my buddy and i ascend to 10 metres/30 feet. our computers will show our no stop time is
The no stop time will now grow on my machine. According to the initial data, I can currently stay at this depth for roughly 72 minutes. The similar increase in no stop time will also be visible on my
The decrease is brought on by the decreased pressure at this depth. Only two-thirds of the pressure at 18 metres (60 feet) was present at 10 metres (30 feet). As a result, less is absorbed because the body's nitrogen stores are depleted. As a result, we will have more no-stop time at our disposal. The precise length of time we have will depend on a number of variables, including our rate of air consumption, our velocity of rise and descent, and the temperature of the water. However, on average, we may anticipate having 72 minutes of uninterrupted time at this depth. It is crucial to keep in mind that every stop time should only be used as a general guide because it might vary widely from person to person. As a result, it's crucial to constantly monitor your computer and make sure you don't exceed the allotted no-stop time. Overall, my friend and I have enhanced our no-stop time from 40 minutes to 72 minutes by 32 minutes by descending to a height of 10 meters/30 feet.
To know more about No stop time Please click on the given link:
https://brainly.com/question/20380836
#SPJ4
A technician is installing new power supplies for the application engineering team's workstations. The management team has not yet made a decision about installing dual graphics cards, but they want to proceed with the project anyway. Which of the following power supplies would provide the BEST solution?
Answer:
a
Explanation:
The 500W redundant power supply. is the most ideal decision, offering adequate power and reinforcement in the event of a power supply disappointment. Hence, option C is the right answer.
Which of the following power supplies would provide the best solution?The BEST answer for the professional to install new power supplies for the application engineering team's workstations would be choice C: 500W redundant power supply.
A 1000W 24-pin measured power supply might be unreasonable for the workstations, possibly prompting failures and higher power utilization.
A 220VAC 9000J flood defender isn't a power supply; it just safeguards against voltage spikes.
A 2000VA uninterruptible power supply (UPS) may give reinforcement power in the event of blackouts, however, it isn't guaranteed to address the requirement for dual graphics cards.
The 500W repetitive power supply offers adequate power limits with respect to the workstations and overt repetitiveness, guaranteeing persistent activity regardless of whether one power supply falls flat. This considers potential double illustration cards from here on out, settling on it as the most reasonable decision for the task.
Learn more about power supply here:
https://brainly.com/question/29979352
#SPJ2
create a web application with asp.net core mvc empty project template. when the user enters url:localhost/employee/pay rate, the following content will be displayed on the browser screen. your pay rate is $25.00.
After Run the application and navigate to "http://localhost:port/employee/payrate" to see the message "Your pay rate is $25.00" displayed on the browser screen.
The steps to create a web application with the ASP.NET Core MVC empty project template, and display the user's pay rate when they enter the URL "localhost/employee/pay rate":
Open Visual Studio and create a new project using the "ASP.NET Core Web Application" template.Select the "Empty" template and click "Create."In the solution explorer, right-click on the "Controllers" folder and select "Add" > "Controller."Select the "MVC Controller - Empty" template and name it "EmployeeController."In the EmployeeController class, create a new action method called "PayRate" that returns a string. In this method, return the string "Your pay rate is $25.00."In the "Startup" class, in the "Configure" method, use the "app.UseEndpoints" method to map the "PayRate" action to the URL "localhost/employee/pay rate."public void Configure(IApplicationBuilder app, IWebHostEnvironment env)
{
if (env.IsDevelopment())
{
app.UseDeveloperExceptionPage();
}
app.UseRouting();
app.UseEndpoints(endpoints =>
{
endpoints.MapControllerRoute(
name: "default",
pattern: "{controller=Home}/{action=Index}/{id?}");
endpoints.MapControllerRoute(
name: "employee",
pattern: "employee/payrate",
defaults: new { controller = "Employee", action = "PayRate" });
});
}
Run the application and navigate to "http://localhost:port/employee/payrate" to see the message "Your pay rate is $25.00" displayed on the browser screen.Learn more about browser here:
https://brainly.com/question/22650550
#SPJ4
for which of the following values of numcorrect does the code segment not display the intended grade?
The code segment not display the intended grade is interchanging Line 3: score ← score - penalty and Line 7: score ← 0.
What is code segment?A code segment in computing is a chunk of an object file or the equivalent area of the virtual address space of the program that includes executable instructions. It is sometimes referred to as a text segment or simply as text. The only distinction I can think of between code and data segment/code segment directives is that when using code segment, segments must be closed, whereas code does not. a portion of a character array that represents a text snippet. Although the array is immediately accessible, it should be viewed as immutable.
Learn more about code segment: https://brainly.com/question/30300695
#SPJ4
A(n) _______ allows an individual or company to share posts with an audience, however, they are designed to be used with mobile devices and limit the size of posts. Select one: a. microblog b. webcast c. e-mail d. podcast
A type of blogging called microblogging uses brief messages without headings (known as microposts).
Status updates were the initial name for microposts. Microblogs' popularity may be largely attributed to the fact that they "enable users to exchange little components of material such as short phrases, individual photos, or video links You might think of several well-known social networks as collections of microblogs. Similar to traditional blogging, users publish about a variety of subjects, from the straightforward "what I'm doing right now" to the more specific "sports cars." Commercial microblogs are also used to advertise websites, services, and goods as well as to foster internal communication in businesses.
Learn more about communication here-
https://brainly.com/question/14809617
#SPJ4
which of the following are true statements about digital certificates in web browsers? digital certificates are used to verify the ownership of encrypted keys used in secured communication. digital certificates are used to verify that the connection to a web site is fault tolerant. responses i only i only ii only ii only i and ii i and ii neither i nor ii
I only as Digital certificates are used to verify the ownership of encrypted keys used in secured communication (i.e. HTTPS, SSL/TLS) and to establish a secure connection to a website. They are not used for fault tolerance.
What is a Digital certificate?
A digital certificate is an electronic document that employs a digital signature to associate a public key with an identity—information such as a person's or organization's name, address, and so on.
The certificate can be used to validate that a public key belongs to a specific person. They are used to secure communication on the internet, such as HTTPS, SSL/TLS and are issued by trusted third parties called certificate authorities.
To learn more about Digital certificate, visit: https://brainly.com/question/17217803
#SPJ4
can you think of other images in our visual culture the meaning of which we too easily accept without examining? a good place to look might be the apps on your phone.
Images and pictures offer a cognitive framework through which humans can perceive and comprehend their surroundings.
They define and mold a day. The author investigates how cultural values and traditions influence particular visual styles by taking into account the methods and systems that support visual displays. A people, a state, or a civilization's physical, or visible, expressions are referred to as having a visual culture, which collectively describes the traits of that body as a whole. The Treachery of Images deftly draws attention to the disconnect between language and intent. We are forced to consider the significance of the sentence and the word by the way that Magritte blended the words and image.
Learn more about pictures here-
https://brainly.com/question/29014566
#SPJ4
design questions to be sure to address with informal report 1. how would you modify the half-adder in order to incorporate more binary bits? 2. compare the gate/inverter/chip counts in the schematic diagrams prepared for each section of the procedure. if a minimum gate/inverter/chip count is desirable, what would you recommend? 3. finally, show your results of the attached additional vhdl simulation introduction.
A combinational arithmetic circuit known as a half adder adds two numbers and produces an output with a sum bit (s) and carry bit (c).
How does Half Adder work?It is a logic circuit that is combinational. By connecting one AND gate and one EX-OR gate, you can design it. A and B are the two input terminals in a half-adder circuit. These terminals add two input digits (one-bit numbers) and produce a carry and a sum as the output.
When two binary numbers with one digit are added using a half adder, the result is a two-digit number. It gets its name from the fact that using an OR gate to combine two half adders creates a full adder. To put it another way, it only does half of what a full adder does.
A half adder is a basic digital device with four terminals that adds two binary input bits. It returns a carry binary bit and the sum binary bit. A half adder is a straightforward digital circuit used to digitally add two binary bits, as previously defined.
How does adding two bits with a half adder work?There are two inputs in the half adder circuit: A and B, which yields a carry and a sum when two input digits are added together. The AND gate's output is the carry, whereas the EX-OR gate's output is the sum of the two numbers. Because there is no logic gate that can process carry addition, there will be no forwarding.
Learn more about Half - adder :
brainly.com/question/13014503
#SPJ4
An AIS is composed of people, procedures and instructions, data, software, technology infrastructure, and controls. These six components enable an AIS to fulfill which of the following important business functions?
a)Transform data into information so management can plan, execute, control, and evaluate activities, resources, and personnel
b)Provide the controls needed to safeguard an organization's assets and data
c)Develop the procedures and instructions needed to operate the software and store the data
d)Collect and store data about the organization's activities, resources, and personnel
e)Hire the best people available to manage the organization
The correct answer is a)Transform data into information so management can plan, execute, control, and evaluate activities, resources, and personnel.
People, Data, Software, Procedure, Information Technology, and Internal Controls are the components of an Accounting Information System (AIS). The operations in accounting, finance, law, and general administration that enable a corporation to run are referred to as firm infrastructure. The infrastructure of the company includes the AIS. The name of the employee, the item sold, and the date are some of the AIS variables that are related to a particular sales transaction. The daily sales quota is not a crucial element that the AIS records in respect to certain sales transactions.
To learn more about data click the link below:
brainly.com/question/10980404
#SPJ4
Write shell scripts that enable administration tasks to be performed on Linux and Windows systems: Get Help; Check Services; List Users and ping a list of servers
The Windows Subsystem for Linux enables programmers to run a GNU/Linux environment directly on Windows, unaltered, without the burden of a conventional virtual machine or dual boot setup.
What is Linux and Window system?The Windows Subsystem for Linux, which enables Windows to run ELF64 Linux programs, is now powered by WSL 2, a new version of the Windows Subsystem for Linux architecture.
Although the interaction between these Linux binaries and Windows and your computer's hardware is altered by this new architecture, the user experience is still the same as in WSL 1.
You can run WSL 1 and WSL 2 distributions simultaneously, and you can upgrade or downgrade any distribution at any time.
Therefore, The Windows Subsystem for Linux enables programmers to run a GNU/Linux environment directly on Windows, unaltered, without the burden of a conventional virtual machine or dual boot setup.
To learn more about linux, refer to the link:
https://brainly.com/question/30176895
#SPJ1
relational databases illustrate relationships between tables. which fields represent the connection between these tables?
Primary keys and foreign keys are the fields in relational databases that represent the link between tables.
What is a DATABASE?In computing, a database is a structured set of data that is accessible and stored electronically.
Small databases can be kept on a file system, while large databases are kept on computer clusters or in the cloud.
The design of databases includes factors like data modeling, efficient data representation and sorage, query languages, security and privacy of sensitive data, and distributed computing difficulties like concurrent access and fault tolerance.
A database management system (DBMS) interacts with applications, end users, and the database itself in order to gather and handle data.
The DBMS software also includes the main management tools for the database.
Hence, Primary keys and foreign keys are the fields in relational databases that represent the link between tables.
learn more about database click here:
brainly.com/question/518894
#SPJ4
consider the following code segment. a 7-line code segment reads as follows. line 1: for, open parenthesis, int k equals 0, semicolon, k less than 20, semicolon, k equals k plus 2, close parenthesis. line 2: open brace. line 3: if, open parenthesis, k modulo 3, equals, equals, 1, close parenthesis. line 4: open brace. line 5: system, dot, out, dot, print, open parenthesis, k plus, open double quote, space, close double quote, close parenthesis, semicolon. line 6: close brace. line 7: close brace. what is printed as a result of executing the code segment?
The code segment is a for loop that starts with int k equals 0, runs while k is less than 20, and increments k by 2 on each iteration.
What happens when the code segment is executed?
Inside the loop, there is an if statement that checks if k modulo 3 is equal to 1. If this condition is true, the code inside the if statement will be executed, which is a call to System.out.print(k + " ");
This means that the code will print the value of k followed by a space if k modulo 3 is equal to 1.
The result of executing the code segment is that the following numbers will be printed to the console: 1 5 11 17
To learn more about iteration, visit: https://brainly.com/question/27794688
#SPJ4
when the robot reaches the gray square, it turns around and faces the bottom of the grid. which of the following changes, if any, should be made to the code segment to move the robot back to its original position in the bottom-left square of the grid and facing toward the bottom of the grid? no change is needed; the algorithm is correct as is.
The robot should move forward until it reaches the bottom-left square of the grid.
Which of the following changes?To move the robot back to its original position in the bottom-left square of the grid and facing toward the bottom of the grid, the following changes should be made to the code segment:First, the robot should turn right by 90 degrees to face the left wall of the gray square. Then the robot should move forward a few steps until it reaches the bottom-left corner of the grid. After that, the robot should turn right again by 90 degrees so it faces the bottom wall of the grid.The changes described above should be implemented to ensure that the robot moves back to its original position in the bottom-left square of the grid and faces toward the bottom of the grid. This can be done by using the turn() and move() commands in the code segment.The turn() command is used to tell the robot to turn a certain number of degrees and the move() command is used to tell the robot to move forward a certain number of steps. After the changes have been implemented, the robot should be in the same position as when it first started.To learn more about the code segment to move the robot refer to:
https://brainly.com/question/30327819
#SPJ4
what the types of viruses target systems such as supervisory control and data acquisition systems, which are used in manufacturing, water purification, and power plants?
These flaws enable remote code execution (RCE), denial of service (DoS), and information theft by attackers.
The transfer of electricity, the movement of gas and oil through pipelines, the distribution of water, traffic lights, and other systems that form the backbone of contemporary society are just a few examples of the physical processes that SCADA systems are used to regulate and monitor. It should be emphasized that information disclosure, stack and buffer overflows, as well as other simple faults, continue to be common SCADA system vulnerabilities. SCADA is a method for high-level process supervisory management that makes use of networked data transmission, graphical user interfaces, and computers. It makes use of tools like PID and programmable logic controllers (PLU).
Learn more about information here-
https://brainly.com/question/15709585
#SPJ4
TRUE/FALSE. domain name servers provide the resolution of application layer addresses to their corresponding network layer address.
The following statement is true. Domain name servers resolve application-layer addresses to corresponding network-layer addresses.
The required details for Domain in given paragraph
What is domain?
Every website has an IP address, which is a unique string of numbers that connect computers to web servers. IP addresses are great for computers, but difficult for people to memorize. That's where domains come in. A domain name is connected to a website's IP address so people can more easily remember and search for a website by its domain and their browser can still find the specific web server that hosts the website via the associated IP address. A domain is often compared to a home address. Your friends don't memorize your house's GSP coordinates every time they want to visit you.
Instead, they just plug in your street address into their phones. The same goes for visiting a website. Instead of memorizing a website's IP address, visitors simply type in the domain into their browser.
To know more about IP
brainly.com/question/19268299
#SPJ4
given string workstr on one line and integer beginindex on a second line, assign finalstr with workstr the substring of workstr starting from the index beginindex to the end. ex: if the input is: fuzzy bear 4 then the output is: fuzzy beary bear note: recall string's length() returns the length of the string. ex: mystring.length().
A string is often regarded as a data type and is frequently implemented as an array data structure made up of bytes (or words) that uses character encoding to hold a sequence of components, typically characters.
What types of strings are examples?A string is any group of characters that a script interprets literally. Examples of strings include "hello world" and "LKJH019283."
What material makes up string?The numerous types of wood that make up the bodies of string instruments, which are hollow inside to allow sound to vibrate within them, are used to construct them, but the strings—which are typically composed of nylon, steel, or even gut—are what actually produce the sound.
To know more about string visit :-
https://brainly.com/question/30099412
#SPJ4
Which of the following is not used much anymore in networking, based on security and waste of bandwidth concerns: a) Switch, b) Router c) Server d) Hub
More intelligent than a hub is a switch. It functions as a connection point for every network device, much like the hub. The efficiency of transmitting a data packet through the network is improved. In a tabular manner, it keeps track of the MAC addresses of the connected machines.
What is a Hub?A multiport repeater, hub, is. It features a variety of ports that can connect to Ethernet using various network devices. Given that it neither filters the data nor understands where the data is supposed to go, it is regarded as the device with the least intelligence. A data packet is replicated to each of the other ports connected to the one where it arrives. Thus, even though the data packet is not intended them, all devices receive it. Active and passive hubs are the two different types. A connector that joins cables from various systems is a passive hub, but an active hub is a multi-point repeater that can renew signals.To Learn more About hubs refer to:
https://brainly.com/question/13850320
#SPJ4